Yamaha YST-7 Kullanım kılavuzu

Yamaha
Marka
Yamaha
Modeli
YST-7
Kategori
Soundbar hoparlörler
Tip
Kullanım kılavuzu

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

I
Active Servo
Technology
Active Servo
Technology
VOLUME
POWERED MULTIMEDIA SPEAKERS
YST-MS201
POWERED MULTIMEDIA SPEAKERS
YST-MS201
OWNER’S MANUAL
MODE D’EMPLOI
Active Servo
Technology
U C A
II
• Explanation of Graphical Symbols
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
SAFETY INSTRUCTIONS
1 Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2 Retain Instructions – The safety and operating
instructions should be retained for future reference.
3 Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and other
instructions should be followed.
5 Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a
swimming pool, etc.
6 Carts and Stands – The unit should be used only with
a cart or stand that is recommended by the
manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause
the unit and cart combination to overturn.
7 Wall or Ceiling Mounting – The unit should be mounted
to a wall or ceiling only as recommended by the
manufacturer.
8 Ventilation – The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be
situated on a bed, sofa, rug, or similar surface, that
may block the ventilation openings; or placed in a built-
in installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
9 Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances
that produce heat.
10 Power Sources – The unit should be connected to a
power supply only of the type described in the
operating instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into
the inside of the unit.
15 Damage Requiring Service – The unit should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet
damaged.
16 Servicing – The user should not attempt to service the
unit beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
17 Power Lines – An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization – Precautions should be
taken so that the grounding or polarization is not
defeated.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
IMPORTANT
Please record the serial number of this system in the
space below.
Model:
Serial No.:
The serial number is located on the rear of the main
unit.
Retain this Owner’s Manual in a safe place for future
reference.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
III
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out
of your equipment by playing it at a safe level. One that lets
the sound come through loud and clear without annoying
blaring or distortion – and, most importantly, without
affecting your sensitive hearing.
Since hearing damage from loud sounds is
often undetectable until it is too late, YAMAHA
and the Electronic Industries Association’s
Consumer Electronics Group recommend you
to avoid prolonged exposure from excessive
volume levels.
For Canadian Customers
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE : DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the
USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies
and, if not installed and used according to the
instructions found in the users manual, may cause
interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this
product is found to be the source of interference, which
can be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Corporation of
America 6600 Orangethorpe Ave. Buena Park, CA90622,
U.S.A.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
IV
TO RIGHT
SPEAKER
TO LEFT
SPEAKERBASS
010
DC IN
15V
INPUT
Active Servo
Technology
Active Servo
Technology
POWERED MULTIMEDIA SPEAKERS
YST-MS201
VOLUME
Subwoofer
Subwoofer
To AC receptacle
Vers une prise du réceptacle CA
PA-M30:
3.5 mm stereo mini plug
Fiches mini-jack stéréo 3,5 mm
Left satellite speaker
Enceinte satellite gauche
Right satellite speaker
Enceinte satellite droite
Rear panel
Panneau arrière
1
2
Active Servo
Technology
Active Servo
Technology
VOLUME
POWERED MULTIMEDIA SPEAKERS
YST-MS201
TO RIGHT
SPEAKER
TO LEFT
SPEAKERBASS
010
DC IN
15V
INPUT
6 7
1 2 3 4 5
Rear panel
Panneau arrière
AC adaptor
Adaptateur CA
English
E-1
Please read the following operating precautions before use.
YAMAHA will not be held responsible for any damage
and/or injury caused by not following the cautions below.
● When you disconnect the AC adaptor from the AC
receptacle, hold the plug itself and not the cord.
● If you plan not to use YST-MS201 for a while, disconnect
the AC adaptor from the AC receptacle.
● Always disconnect the AC adaptor from the AC
receptacle before making any connections.
● YST-MS201 does not contain any user serviceable parts.
Refer all servicing to your Yamaha dealer.
● Never open the cabinet. If a foreign object drops into
the set, contact your dealer and stop using YST-MS201.
Otherwise, you may cause a fire.
● Do not expose YST-MS201 to extreme temperatures,
direct sunlight, excessive dust, humidity, or vibration.
● Position YST-MS201 on a level, stable surface. Do not
drop, apply excessive force to their controls, or put heavy
items on top of them.
●
Do not place small metallic objects on YST-MS201.
Otherwise, the object may fall, possibly causing an injury.
● Since the subwoofer has a built-in power amplifier, heat
will radiate from the rear panel. Place the subwoofer
apart from the walls, allowing a space of at least 20 cm
(7-7/8”) above, behind and on both sides of the
subwoofer. Also, do not position with the rear panel
facing down on the floor or other surfaces.
● Do not cover the rear panel of the subwoofer with a
newspaper, a tablecloth, a curtain, etc. in order not to
obstruct heat radiation. If the temperature inside the
subwoofer rises, it may cause fire, damage to the
subwoofer and/or personal injury.
● Do not place the following objects on YST-MS201:
Glass, china, etc.
If glass etc. falls by vibrations and breaks, it may cause
personal injury.
A burning candle etc.
If the candle falls by vibrations, it may cause fire and
personal injury.
A vessel with water in it
If the vessel falls by vibrations and water spills, it may
cause damage to YST-MS201, and/or you may get an
electric shock.
● To protect YST-MS201, avoid microphone feedback,
continuous and excessive output from electronic musical
instruments, and excessive signal distortion.
● If YST-MS201 is located close to fluorescent or neon
lights, a slight hum may be heard. In this case, relocate
YST-MS201 away from the light.
● Although YST-MS201 is magnetically shielded, keep
floppy disks and tapes away from it.
● Avoid sources of hum (transformers, motors). To prevent
fire or electrical shock, do not expose to rain or water.
● Do not use force on switches, knobs, or cables. When
you move YST-MS201, first turn off the power, then
disconnect the AC adaptor from the AC receptacle and
the cables from the connected devices.
● Always set the POWER/VOLUME control fully to the left
(in the standby mode) before starting to play the audio
source: turn the control gradually after the play has
started.
● Be sure to use the AC adaptor (PA-M30) supplied
with YST-MS201. Otherwise, you might cause a fire
or damage to YST-MS201.
Standby mode
When YST-MS201 is turned off by rotating the POWER/
VOLUME control, YST-MS201 consumes a small amount
of power. This state is called the standby mode. The
power supply is completely cut off from the AC line only
when the AC adaptor is disconnected.
YST-MS201 features a magnetically shielded design, but
there is still a chance that placing it too close to a TV or
a computer monitor might impair picture color. Should
this happen, move YST-MS201 away from the TV or the
computer monitor.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT:
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows: The wire which is coloured BLUE must be
connected to the terminal which is marked with the letter
N or coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured RED. Making sure
that neither core is connected to the earth terminal of the
three pin plug.
Thank you for selecting Yamaha’s YST-MS201 Powered Multimedia Speakers. Yamaha Active Servo Technology offers
exceptionally high performance, allowing these compact speakers to produce a rich bass sound.
CAUTIONS
(See figure 1 on page IV.)
Make connections between the subwoofer, the satellite
speakers and other equipment as shown in the figure.
Caution: Plug in the subwoofer and other
equipment after all connections are
completed.
CONNECTIONS
E-2
Problem
No sound comes from the speakers or
subwoofer.
The bass sound cannot be heard.
Sound is distorted.
Noise.
What to Do
Insert the AC adaptor firmly into the AC
receptacle.
Turn on the power by turning the POWER/
VOLUME control clockwise. (The power
indicator lights up.)
Make the connections again.
Turn the POWER/VOLUME control clockwise
to increase the volume.
Turn up the volume on the connected
component.
Turn the subwoofer BASS control clockwise
to increase the volume.
Turn down the volume on the connected
component.
Make the connections again.
Cause
The AC adaptor is not properly plugged into
the AC receptacle.
The POWER/VOLUME control is set to off.
Connections are faulty or incomplete.
The volume setting is low.
The level of the signal being inputted is too
low.
The BASS control is set to minimum.
The level of the signal being inputted is too
high.
Connections are faulty or incomplete.
Refer to the chart below when the speakers do not function properly. If the problem you are experiencing is not listed below or if the instructions
given below do not help, disconnect the AC adaptor and contact your authorized YAMAHA dealer or service center.
Type .................................Yamaha Active Servo Technology
Driver
Satellite.......................8.5 (3-3/8”) 3 4.5 cm (1-3/4”) cone,
magnetically shielded type
Subwoofer
................ 12 cm (4-3/4”) cone, magnetically shielded type
Amplifier Output
Satellite................... 6 W + 6 W (1 kHz, 4Ω at T.H.D.=10%)
Subwoofer .................... 18 W (100 Hz, 4Ω at T.H.D.=10%)
Input sensitivity........................200 mV (1 kHz, 4Ω at 6 W)
Input impedance ....................................................... 20 kΩ
Frequency response ................................. 45 Hz to 20 kHz
(Satellite + Subwoofer)
Power supply (AC adaptor)
U.S.A. and Canada models ......................AC 120 V, 60 Hz
U.K. and Europe models...........................AC 230 V, 50 Hz
Australia model .........................................AC 240 V, 50 Hz
Dimensions (W X H X D)
Satellite speakers
............ 70 (2-3/4”) 3 195 (7-11/16”) 3 145 (5-11/16”) mm
Subwoofer
................ 193 (7-5/8”) 3 207 (8-1/8”) 3 214 (8-7/16”) mm
Weight
Satellite speakers ............................Right: 0.6 kg (1.3 lbs.)
Left: 0.5 kg (1.1 lbs.)
Subwoofer ................................................. 2.8 kg (6.2 lbs.)
Accessory ...................................AC adaptor (PA-M30) 3 1
* Specifications are subject to change without notice.
(See figure 2 on page IV.)
1 INPUT
Connect this 3.5 mm mini plug connector cable to the
output terminal of a CD player, a personal computer,
etc. which input an audio source to YST-MS201.
2 BASS control
Allows you to adjust the output level of low range
sound from the subwoofer.
A typical (recommended) setting is the position
between one o’clock and two o’clock.
Rotate the control clockwise to increase the level and
counterclockwise to decrease the level.
3 TO LEFT SPEAKER
Connect the RCA pin plug cable from the left satellite
speaker to this connector.
4 DC IN connector
Connect the supplied AC adaptor to this connector.
5 TO RIGHT SPEAKER
Connect the 8-pin cable from the right satellite speaker
to this connector.
6 Power indicator
Lights up when the power of YST-MS201 is on.
7 POWER/VOLUME control
Slowly turn the control clockwise. When it clicks, the
power of YST-MS201 turns on and the power indicator
(6) lights up.
Turn the control clockwise furthermore to increase the
volume level of the entire speaker system and
counterclockwise to decrease the level.
To turn YST-MS201 into the standby mode, turn the
control fully counterclockwise until it clicks. The power
indicator (6) will also go off.
CONTROLS & CONNECTORS SPECIFICATIONS
TROUBLESHOOTING
N-1
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VASTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
V664810
Printed in China
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Yamaha YST-7 Kullanım kılavuzu

Yamaha
Marka
Yamaha
Modeli
YST-7
Kategori
Soundbar hoparlörler
Tip
Kullanım kılavuzu
Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:
PDF''yi indir
rapor

diğer dillerde

İlgili makaleler