Siemens VB558C0S0/02 Kullanım kılavuzu

VB558C0S0

Oven

EN User manual and installation instructions .................................... 2

ES Manual de usuario e instrucciones de montaje .......................... 27

PT Manual do utilizador e instruções de instalação ......................... 53

TR Kullanım kılavuzu ve kurulum talimatları ................................... 79

Siemens Home Appliances

Register your appliance on My Siemens and

discover exclusive services and offers.

en Safety

2

Table of contents

INFORMATION FOR USE

1 Safety...................................................................2

2 Preventing material damage ..............................4

3 Environmental protection and saving en-

ergy ......................................................................5

4 Familiarising yourself with your appliance .......5

5 Accessories.........................................................8

6 Before using for the first time ..........................10

7 Basic operation .................................................10

8 Time-setting options.........................................11

9 Child safety lock ...............................................12

10 Basic settings....................................................12

11 Cleaning and servicing.....................................13

12 Rails ...................................................................16

13 Appliance door..................................................16

14 Troubleshooting................................................18

15 Disposal.............................................................19

16 Customer Service..............................................19

17 How it works......................................................19

18 INSTALLATION INSTRUCTIONS ......................23

18.1 Safe installation ................................................23

1 Safety

Observe the following safety instructions.

1.1 General information

¡Read this instruction manual carefully.

¡Keep the instruction manual and the

product information safe for future refer-

ence or for the next owner.

¡Do not connect the appliance if it has been

damaged in transit.

1.2 Intended use

This appliance is designed only to be built

into kitchen units. Read the special installation

instructions.

Only a licensed professional may connect ap-

pliances without plugs. Damage caused by in-

correct connection is not covered under the

warranty.

Only use this appliance:

¡To prepare meals and drinks.

¡in private households and in enclosed

spaces in a domestic environment.

¡up to an altitude of max. 2000m above

sea level.

Do not use the appliance:

¡with an external timer or a remote control.

1.3 Restriction on user group

This appliance may be used by children aged

8 or over and by people who have reduced

physical, sensory or mental abilities or inad-

equate experience and/or knowledge,

provided that they are supervised or have

been instructed on how to use the appliance

safely and have understood the resulting

dangers.

Do not let children play with the appliance.

Children must not perform cleaning or user

maintenance unless they are at least 15 years

old and are being supervised.

Keep children under the age of 8 years away

from the appliance and power cable.

1.4 Safe use

Always place accessories in the cooking com-

partment the right way round.

→"Accessories", Page8

WARNING‒Risk of fire!

Combustible objects that are left in the cook-

ing compartment may catch fire.

▶Never store combustible objects in the

cooking compartment.

▶If smoke is emitted, the appliance must be

switched off or the fuse must be switched

off and the door must be held closed in or-

der to stifle any flames.

Loose food remnants, fat and meat juices

may catch fire.

▶Before using the appliance, remove the

worst of the food residues and remnants

from the cooking compartment, heating ele-

ments and accessories.

Safety en

3

Opening the appliance door creates a

draught. Greaseproof paper may come into

contact with the heating element and catch

fire.

▶Never place greaseproof paper loosely

over accessories when preheating the ap-

pliance and while cooking.

▶Always cut greaseproof paper to size and

use a plate or baking tin to hold it down.

WARNING‒Risk of burns!

The appliance and its parts that can be

touched become hot during use.

▶Caution should be exercised here in order

to avoid touching heating elements.

▶Young children under 8 years of age must

be kept away from the appliance.

Accessories and cookware get very hot.

▶Always use oven gloves to remove ac-

cessories or cookware from the cooking

compartment.

When the cooking compartment is hot, any al-

coholic vapours inside may catch fire. The ap-

pliance door may spring open. Hot steam and

jets of flame may escape.

▶Only use small quantities of drinks with a

high alcohol content in food.

▶Do not heat spirits (≥ 15% vol.) when undi-

luted (e.g. for marinating or pouring over

food).

▶Open the appliance door carefully.

The telescopic shelves become hot when the

appliance is in use.

▶Allow hot telescopic shelves to cool down

before touching them.

▶Only touch hot telescopic shelves with

oven gloves.

WARNING‒Risk of scalding!

The accessible parts of the appliance become

hot during operation.

▶Never touch these hot parts.

▶Keep children at a safe distance.

Hot steam may escape when you open the

appliance door. Steam may not be visible, de-

pending on the temperature.

▶Open the appliance door carefully.

▶Keep children at a safe distance.

If there is water in the cooking compartment

when it is hot, this may create hot steam.

▶Never pour water into the cooking compart-

ment when the cooking compartment is

hot.

WARNING‒Risk of injury!

Scratched glass in the appliance door may

develop into a crack.

▶Do not use any harsh or abrasive cleaners

or sharp metal scrapers to clean the glass

on the oven door, as they may scratch the

surface.

The appliance and its parts that can be

touched may have sharp edges.

▶Take care when handling and cleaning

them.

▶If possible, wear protective gloves.

The hinges on the appliance door move when

the door is opened and closed, which could

trap your fingers.

▶Keep your hands away from the hinges.

Components inside the appliance door may

have sharp edges.

▶Wear protective gloves.

WARNING‒Risk of electric shock!

Improper repairs are dangerous.

▶Repairs to the appliance should only be

carried out by trained specialist staff.

▶Only use genuine spare parts when repair-

ing the appliance.

▶If the power cord of this appliance is dam-

aged, it must be replaced by the manufac-

turer, the manufacturer's Customer Service

or a similarly qualified person in order to

prevent any risk.

If the insulation of the power cord is dam-

aged, this is dangerous.

▶Never let the power cord come into contact

with hot appliance parts or heat sources.

▶Never let the power cord come into contact

with sharp points or edges.

▶Never kink, crush or modify the power

cord.

An ingress of moisture can cause an electric

shock.

▶Do not use steam- or high-pressure clean-

ers to clean the appliance.

If the appliance or the power cord is dam-

aged, this is dangerous.

▶Never operate a damaged appliance.

▶Call customer services. →Page19

en Preventing material damage

4

WARNING‒Risk of suffocation!

Children may put packaging material over

their heads or wrap themselves up in it and

suffocate.

▶Keep packaging material away from chil-

dren.

▶Do not let children play with packaging ma-

terial.

Children may breathe in or swallow small

parts, causing them to suffocate.

▶Keep small parts away from children.

▶Do not let children play with small parts.

1.5 Halogen bulb

WARNING‒Risk of burns!

The bulbs in the cooking compartment get

very hot. There is still a risk of burning for

some time after they have been switched off.

▶Do not touch the glass cover.

▶Avoid contact with your skin when cleaning.

WARNING‒Risk of electric shock!

When changing the bulb, the bulb socket con-

tacts are live.

▶Before replacing the bulb, ensure that the

appliance is switched off in order to pre-

vent a potential electric shock.

▶Also switch off the fuse in the fuse box.

Preventing material damage

2 Preventing material damage

Preventing material damage

2.1 General

ATTENTION!

Alcoholic vapours may catch fire in the hot cooking

compartment and cause permanent damage to the ap-

pliance. The appliance door may spring open due to

an explosion and it may fall off. The door panels may

shatter and fragment. Due to the resulting negative

pressure, the cooking compartment may become con-

siderably deformed inwards.

▶Do not heat spirits (≥ 15% vol.) when undiluted (e.g.

for marinating or pouring over food).

If there is water on the cooking compartment floor

when operating the appliance at temperatures above

120°C, this will damage the enamel.

▶Do not use the appliance if there is water on the

cooking compartment floor.

▶Wipe away any water on the cooking compartment

floor before operation.

Objects on the cooking compartment floor at over

50°C will cause heat to build up. The baking and

roasting times will no longer be correct and the enamel

will be damaged.

▶Do not place any accessories, greaseproof paper or

foil of any kind on the cooking compartment floor.

▶Only place cookware on the cooking compartment

floor if a temperature under 50°C has been set.

When the cooking compartment is hot, any water in-

side it will create steam. The change in temperature

may cause damage.

▶Never pour water into the cooking compartment

when it is still hot.

▶Never place cookware containing water on the

cooking compartment floor.

The prolonged presence of moisture in the cooking

compartment leads to corrosion.

▶Always wipe away the condensation after cooking.

Always allow the cooking compartment to cool

down with the door closed after cooking at high

temperatures.

▶Do not keep moist food in the cooking compartment

for a long time with the door closed.

▶Do not store food in the cooking compartment.

▶Take care not to trap anything in the appliance

door.

Fruit juice dripping from the baking tray leaves stains

that cannot be removed.

▶When baking very juicy fruit flans, do not pack too

much on the baking tray.

▶If possible, use the deeper universal pan.

Using oven cleaner in a hot cooking compartment

damages the enamel.

▶Never use oven cleaner in the cooking compartment

when it is still warm.

▶Remove all food remnants from the cooking com-

partment and the appliance door before you next

heat up the appliance.

If the seal is very dirty, the appliance door will no

longer close properly during operation. This may dam-

age the front of adjacent kitchen units.

▶Keep the seal clean at all times.

▶Never operate the appliance if the seal is damaged

or missing.

Sitting or placing objects on the appliance door may

damage it.

▶Do not place, hang or support objects on the appli-

ance door.

▶Do not place cookware or accessories on the appli-

ance door.

With certain models, accessories may scratch the door

pane when closing the appliance door.

▶Always push accessories fully into the cooking com-

partment.

If aluminium foil comes into contact with the door pane,

it could cause permanent discolouration.

▶Do not allow aluminium foil in the cooking compart-

ment to come into contact with the door pane.

Environmental protection and saving energy en

5

Environmental protection and saving energy

3 Environmental protection and saving energy

Environmental protection and saving energy

3.1 Disposing of packaging

The packaging materials are environmentally compat-

ible and can be recycled.

▶Sort the individual components by type and dispose

of them separately.

3.2 Saving energy

If you follow these instructions, your appliance will use

less power.

Only preheat the appliance if the recipe or the recom-

mended settings tell you to do so.

→"How it works", Page19

¡Not preheating the appliance can reduce the en-

ergy used by up to 20%.

Use dark-coloured, black-coated or enamelled baking

tins.

¡These types of baking tin absorb the heat particu-

larly well.

Open the appliance door as little as possible during

operation.

¡This maintains the temperature in the cooking com-

partment and eliminates the need for the appliance

to reheat.

When baking multiple dishes, do so in succession or

in parallel.

¡The cooking compartment is heated after baking

the first dish. This reduces the baking time for the

subsequent cakes.

For longer cooking times, you can switch the appli-

ance off 10minutes before the cooking time ends.

¡There is sufficient residual heat to finish cooking

the dish.

Remove any accessories that are not being used from

the cooking compartment.

¡Accessories that are not being used do not need to

be heated.

Allow frozen food to defrost before cooking.

¡This saves the energy that would otherwise be re-

quired to defrost it.

Note:

The appliance requires:

¡A maximum of 1W in standby mode with the dis-

play switched on

¡A maximum of 0.5W in standby mode with the dis-

play switched off

Familiarising yourself with your appliance

4 Familiarising yourself with your appliance

Familiarising yourself with your appliance

4.1 Control panel

You can use the control panel to configure all functions of your appliance and to obtain information about the operat-

ing status.

Note:On certain models, specific details such as col-

our and shape may differ from those pictured.

en Familiarising yourself with your appliance

6

1 2 3

4

1

Function selector Use the function selector to set the type of heating or other functions. You can

turn the function selector clockwise or anti-clockwise from the zero setting.

2

Display The display shows symbols for active functions and the time-setting options.

3

Temperature selector Use the temperature selector to set the temperature for the type of heating or

select the setting for other functions. You can turn the temperature selector

clockwise and anti-clockwise. It does not have an off position.

4

Touch fields You can use the touch fields to set various functions directly.

Buttons

You can use the buttons to directly select various functions.

Note:If a button is not operational, a signal tone sounds.

Symbol Button Explanation

Time-setting options Set the timer, cooking time, end time or time

Minus Decrease the setting value

Plus Increase the setting value

Lighting Switch the interior lighting on or off

Rapid heating Switch the rapid heating on and off

Childproof lock Activate and deactivate the childproof lock in standby mode

Display

You can see the current setting values or options in the

display.

The value that you can currently set is in focus. The

value is displayed in white lettering with a dark back-

ground.

Symbol Explanation

Rapid heating

Timer

Duration

End

Time

Symbol Explanation

⁠ ⁠: Time indicator

Heat-up indicator

Childproof lock

Temperature indicator

Temperature selector

Use the temperature selector to set the temperature or

grill setting.

Note:The temperature can be set in 1-degree incre-

ments up to 100°C, and in 5-degree increments there-

after.

Familiarising yourself with your appliance en

7

Temperature control

The temperature indicator bars show the heating

phases or residual heat in the cooking compartment.

Heating phase Meaning

Heating indic-

ator The heating indicator displays the

rising temperature in the cooking

compartment. When all bars are

filled, the optimum time for placing

the dish in the oven has been

reached.

In the grill settings, the bars are all

already filled.

The bars are not filled for the gentle

top/bottom heating type of heating.

Residual heat

indicator When the appliance is switched off,

the temperature indicator shows the

residual heat in the cooking compart-

ment. Once the temperature has

dropped to approximately 60°C, the

display goes out.

4.2 Types of heating and functions

To ensure that you always use the right type of heating to cook your food, we have explained the differences and ap-

plications below.

Note:For each type of heating, the appliance specifies a default temperature or default setting. You can accept this

value or change it in the appropriate area.

Symbol Type of heating or

function Temperature or setting Use

3D hot air 50-280°C Prepare dishes on 1-2 levels. The fans distribute the heat

from the ring-shaped heating elements in the back panel

evenly around the cooking compartment.

This type of heating is used to measure the energy con-

sumption in air recirculation mode.

Air recirculation 50-280°C Bake cakes and baked items on one level. The fans dis-

tribute the heat from the heating elements evenly around

the cooking compartment.

Pizza setting 50-280°C Prepare fresh pizza or frozen products, e.g. chips or stru-

del. The heating elements and fans heat quickly and dis-

tribute the heat evenly around the cooking compartment.

Defrosting 30-60°C Defrost food, e.g. meat, poultry, bread and cakes. The

fan causes the warm air to swirl around the dish.

Bottom heating 50-280°C Cook dishes for additional time. The heat is emitted from

below.

Grill, small area Grill settings:

1 = low

2 = medium

3 = high

Grill small amounts, e.g. steaks, sausages, toast and

pieces of fish. The centre part of the grill element be-

comes hot.

Full-surface grill Grill settings:

1 = low

2 = medium

3 = high

Grill flat items, such as steak, sausages or toast and

gratinate. The entire area below the grill element be-

comes hot.

Circulated air grill 50-280°C Roast meat, poultry and whole fish. The fan circulates

the hot air around the food.

Top/bottom heat

gentle 50-280°C For gently cooking selected types of food (e.g.meat, ve-

getables) on one level without preheating. The type of

heating is unsuitable for food that rises as it bakes

(e.g.bread). This type of heating is used to measure

both the energy consumption in the conventional mode

and the energy efficiency class.

Top/bottom heat-

ing 50-280°C Prepare cakes, bakes and lean joints. The heat is emit-

ted evenly from above and below.

en Accessories

8

4.3 Cooking compartment

The functions in the cooking compartment make your

appliance easier to use.

Shelf positions

The cooking compartment has 4 shelf positions.

Always insert the accessory as far as it will go so that

the accessory does not touch the door panel. Slide the

accessory into the cooking compartment correctly.

Self-cleaning surfaces

The back wall and side panels of the cooking compart-

ment are self-cleaning. The self-cleaning surfaces in the

cooking compartment are coated with a porous, matt

ceramic layer and have a rough surface. When the ap-

pliance is in operation, the self-cleaning surfaces ab-

sorb splashes from roasting or grilling and break them

down.

Interior lighting

When you open the appliance door, the interior lighting

switches on. If the appliance door remains open, the

light switches off again after a short time.

In most operating modes, the interior lighting switches

on as soon as operation starts. Once the operation is

complete, this switches off.

Note:In "Top/bottom heat gentle" mode, the interior

lighting switches off automatically after ap-

prox.1minute. You can switch on the interior lighting

using ⁠.

Cooling fan

The cooling fan switches on and off as required. The

hot air escapes via the appliance door.

ATTENTION!

Covering the ventilation slots will cause the appliance

to overheat.

▶Do not cover the ventilation slots.

To cool the cooking compartment more quickly after

operation, the cooling fan continues to run for a certain

period afterwards.

Appliance door

If you open the appliance door while the appliance is in

operation, this pauses operation. When you close the

door, the operation continues.

To ensure that the appliance door does not come into

contact with the fitted unit, the appliance door opens

slightly less than 90°.

Condensation

This section tells you how condensation is formed, how

you can prevent damage, and how you can prevent

condensation from forming.

When you are cooking food in the cooking compart-

ment, a lot of steam may form in the cooking compart-

ment. Since your appliance is extremely energy-effi-

cient, only a small amount of heat escapes during op-

eration. Due to the significant differences in temperat-

ure between the appliance interior and the external

parts of the appliance, condensation may build up on

the appliance door, the control panel or the front pan-

els of adjacent kitchen units. The formation of condens-

ation is a normal physical phenomenon.

In order to prevent damage, wipe away the condensa-

tion. If condensation collects in the drip trough, remove

the condensation with a sponge. An overflowing drip

trough may damage the fitted unit. Leave the appliance

to dry with the door open.

When you preheat the appliance, you reduce the build-

up of condensation.

Accessories

5 Accessories

Accessories

Use original accessories. These have been made espe-

cially for your appliance.

Note:Accessories may become deformed if they get

hot. Deformation has no effect on function. As the ac-

cessory cools down, it will regain its original shape.

The accessories supplied may differ depending on the

appliance model.

Accessories en

9

Accessories Use

Wire rack ¡Cookware

¡Cake tins

¡Meat, e.g. roasting joints or steak

¡Frozen meals

Universal pan ¡Moist cakes

¡Baked items

¡Frozen meals

¡Large roasts

Tip:You can use the universal pan to catch

dripping fat if you are grilling directly on the

wire rack.

Baking tray ¡Tray bakes

¡Small baked items

Telescopic rail set Use the pull-out rails to pull the accessory

out further.

Locking pins Lock hinges.

Note:Do not throw away the locking pins.

Store the locking pins in a secure location.

You always require the locking pins when

you remove the door or door panels from the

appliance.

5.1 Other accessories

You can purchase other accessories from our after-

sales service, specialist retailers or online.

You will find a comprehensive range of products for

your appliance in our brochures and online:

siemens-home.bsh-group.com

Accessories vary from one appliance to another. When

purchasing accessories, always quote the exact

product number (E no.) of your appliance.

You can find out which accessories are available for

your appliance in our online shop or from our after-

sales service.

Other accessories Use

Wire rack ¡Cookware

¡Cake tins

¡Meat, e.g. roasting

joints or steak

¡Frozen meals

Baking tray ¡Tray bakes

¡Small baked items

Universal pan ¡Moist cakes

¡Baked items

¡Frozen meals

¡Large roasts

Telescopic rail set Telescopic rail set for one

level

5.2 Locking function

The locking function prevents the accessories from tilt-

ing when they are pulled out.

You can pull out the accessory approximately halfway

without them tipping. The accessory must always be in-

serted into the cooking compartment the right way

round for the tilt protection to work properly.

5.3 Sliding accessories into the cooking

compartment

1. Turn the accessory in such a way that the notch

is at the rear and is facing downwards.

2. Insert the accessory between the two guide rods for

a shelf position.

en Before using for the first time

10

Wire rack The open side must be facing the

appliance door and the curvature

must be at the bottom (i.e. ).

Tray, e.g. uni-

versal pan or

baking tray

The sloping edge of the accessory

must be facing towards the ap-

pliance door.

3. To place the accessory at shelf positions with pull-

out rails, pull out the pull-out rails.

Wire rack or

baking tray Position the accessory so that its

edge is behind the lug on the

pull-out rail.

Note:The pull-out rails lock in place when they are

fully pulled out. Gently push the pull-out rails back

into the cooking compartment.

4. Push the accessory all the way in, making sure that

it does not touch the appliance door.

Note:Take any accessories that you will not be using

out of the cooking compartment while the appliance is

in operation.

Before using for the first time

6 Before using for the first time

Before using for the first time

Configure the settings for initial start-up. Clean the ap-

pliance and accessories.

6.1 Setting the time

Once the appliance is connected to a power supply, ⁠

⁠: ⁠ ⁠ flashes on the display and the ⁠symbol lights up

continuously. Set the time.

1. Use ⁠ or ⁠to set the time.

2. Press ⁠.

Note:Once the set time has elapsed, the time is auto-

matically saved.

6.2 Cleaning the appliance before using it

for the first time

Clean the cooking compartment and accessories be-

fore using the appliance to prepare food for the first

time.

1. Remove the accessories from the cooking compart-

ment and remove the shelves. →Page16

2. Completely remove any leftover packaging, e.g.

small pieces of polystyrene, from the cooking com-

partment.

3. Some parts are covered with a protective film. Re-

move this scratch protection film.

4. Clean the outside of the appliance with a soft, damp

cloth.

5. Clean the cooking compartment with hot soapy wa-

ter.

6. To eliminate the new-appliance smell, heat up the

empty appliance with the door closed.

7. Turn the function selector to ⁠.

8. Set the maximum temperature.

If you are heating up the appliance for the first time,

you may hear crackling noises from the cooking

compartment.

9. Ventilate the kitchen while the appliance is heating.

10. Switch off the appliance after 1hour.

11. Allow the appliance to cool down.

12. Once the cooking compartment has cooled down,

clean the smooth surfaces with soapy water.

13. Install the rails. →Page16

14. If necessary, clean the door panels. →Page16

6.3 Cleaning the accessories

▶Clean the accessory thoroughly with soapy water

and a soft dish cloth.

Basic operation

7 Basic operation

Basic operation

7.1 Switching on the appliance

1. Use the function selector to set the type of heating.

aEach function has a default temperature or grill set-

ting.

2. Use the temperature selector to select the temperat-

ure or grill setting.

aThe appliance starts heating.

Note:The temperature control displays the current

heating status.

Time-setting options en

11

7.2 Changing the type of heating and

temperature

1. Use the function selector to change the type of heat-

ing.

2. Use the temperature selector to change the temper-

ature or grill setting.

7.3 Switching off the appliance

▶Turn the function selector to the off position.

7.4 Switching on the rapid heating function

▶Press the ⁠button to heat up the cooking com-

partment quickly.

Note:Rapid heating is available for 3D hot air, air recir-

culation, the pizza setting and top/bottom heating.

7.5 Automatic switch-off

The appliance has automatic switch-off. The appliance

automatically switches off after 13hours.

Time-setting options

8 Time-setting options

Time-setting options

8.1 Overview of the time-setting options

You can find an overview of the time-setting options here.

Symbol Time-setting option Use

Short-term timer The short-term timer functions like an egg timer. It runs independently of the ap-

pliance when it is in operation and of other time-setting options, and does not af-

fect the appliance.

Time When no other function is running in the foreground, the appliance shows you

the time of day on the display.

Duration Once the set cooking time has elapsed, the appliance automatically stops heat-

ing.

End Enter a cooking time and the required end time. The appliance starts up auto-

matically so that it finishes cooking at the required time.

8.2 Setting the short-term timer

The timer has no influence on the functions of the

oven.

Note:You can set the time on the short-term timer from

30seconds up to 13hours. You can set the duration

in 30-second increments up to 10minutes, in 1-minute

increments from 10minutes to 1hour, and then in 5-

minute increments.

1. Press ⁠.

a lights up.

2. Use and to set the required duration.

aA signal tone sounds once the time has elapsed.

Notes

¡To change the remaining time, press and use

or to change the remaining time.

¡To cancel the short-term timer, set the remaining

time to zero.

Switching off the signal tone

▶To switch off the signal tone, press any button or

open the appliance door.

Note:After a short time, the signal tone stops automat-

ically.

8.3 Setting the time

If required, you can change the time, e.g. from summer

time to winter time.

Requirement:The appliance is switched off.

1. Press until lights up.

2. Use and to set the time.

8.4 Setting the duration

You can set the cooking time for your food on your ap-

pliance. This prevents the food from accidentally being

cooked for too long, and means that you do not have

to stop what you are doing to switch off the oven.

1. Set the type of heating and the temperature.

aThe appliance starts.

2. Press twice.

3. Use and to set the duration.

You can set the duration from 30seconds up to

13hours. You can set the cooking time in 1-minute

increments up to 1 hour, and then in 5-minute incre-

ments.

a lights up.

Turning off the operation

When the time has elapsed, a signal tone sounds. The

appliance stops heating.

1. To switch off the signal tone, press any button or

open the appliance door.

After a short time, the signal tone stops automatic-

ally.

2. Turn the function selector to the off position.

8.5 Setting the end time

Operation starts for the set duration at a later time that

is selected by you.

en Child safety lock

12

1. Set the type of heating and the temperature.

aThe appliance starts.

2. Press twice.

3. Use and to set the duration.

You can set the duration from 30seconds up to

13hours. You can set the cooking time in 1-minute

increments up to 1 hour, and then in 5-minute incre-

ments.

a lights up.

4. Press ⁠.

5. Use or to set the end time.

The first time you press the button, the display

shows a default value. This default value is calcu-

lated using the current time on the clock and the

duration.

a lights up.

aThe display shows the end time. The appliance

switches to standby mode.

Turning off the operation

When the time has elapsed, a signal tone sounds. The

appliance stops heating.

1. To switch off the signal tone, press any button or

open the appliance door.

After a short time, the signal tone stops automatic-

ally.

2. Turn the function selector to the off position.

Child safety lock

9 Child safety lock

Child safety lock

You can secure your appliance to prevent children

from accidentally switching it on or changing the set-

tings.

If you have connected a hob to the oven, the hob is not

locked.

9.1 Activating the child safety lock

Requirement:The appliance is switched off.

▶Press and hold for approx. 4seconds.

a appears on the display.

9.2 Deactivating the child safety lock

▶Press and hold for approx. 4seconds.

a disappears from the display.

Basic settings

10 Basic settings

Basic settings

You can configure the basic settings for your appliance to meet your needs.

10.1 Overview of the basic settings

Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features

of your appliance.

Display Basic setting Selection

Signal duration upon completion of a cooking time or

timer period = approx. 10seconds

= approx. 30seconds1

= approx. 2 minutes

Waiting time until a setting is adopted = approx. 3seconds1

= approx. 6seconds

= approx. 10seconds

Button tone that sounds when a button is touched = off

= on1

Brightness of the display illumination = dark

= medium1

= bright

Time display = hide the time

= display the time1

Interior lighting during operation = No

= Yes1

1Factory setting

Cleaning and servicing en

13

Display Basic setting Selection

Cooling fan run-on time = short1

= moderate

= long

= extra long

Reset all values to factory settings = No1

= Yes

Activate demo mode.

The demo mode is used for demonstration purposes

only. The appliance does not heat up in demo mode.

You can activate the demo mode only in the first

5minutes after connecting to the power supply.

= No1

= Yes

1Factory setting

10.2 Changing the basic settings

Requirement:The function selector is set to the off po-

sition.

1. Press and hold for approx. 4seconds.

aThe display shows the first basic setting, e.g. ⁠ ⁠ ⁠ ⁠.

2. Turn the temperature selector to change the setting.

3. Press to switch to the next basic setting.

4. Press and hold for approx. 4seconds to confirm

the settings.

Tip:You can change the basic settings again at any

time.

Notes

¡You can activate the demo mode only in the first

5minutes after connecting to the power supply.

¡Your changes to the basic settings are retained

even after a power cut.

10.3 Setting energy-saving mode

You can save energy by reducing the display bright-

ness.

▶You can set the display brightness under basic set-

ting ⁠ ⁠ ⁠.

Note:This setting changes the brightness of the dis-

play while the appliance is in operation. In standby

mode, the appliance automatically reduces the display

brightness. The display is at its dimmest at night,

between the hours of 22:00 and 05:59.

Cleaning and servicing

11 Cleaning and servicing

Cleaning and servicing

To keep your appliance working efficiently for a long

time, it is important to clean and maintain it carefully.

11.1 Cleaning products

To avoid damaging the various surfaces on the appli-

ance, do not use any unsuitable cleaning agents.

WARNING‒Risk of electric shock!

An ingress of moisture can cause an electric shock.

▶Do not use steam- or high-pressure cleaners to

clean the appliance.

ATTENTION!

Unsuitable cleaning agents damage the surfaces of the

appliance.

▶Do not use harsh or abrasive cleaning products.

▶Do not use cleaning products with a high alcohol

content.

▶Do not use hard scouring pads or cleaning

sponges.

▶Do not use any special cleaners for cleaning the ap-

pliance while it is hot.

▶Only use glass cleaners, glass scrapers or stainless

steel care products if recommended in the cleaning

instructions for the relevant part.

Using oven cleaner in a hot cooking compartment

damages the enamel.

▶Never use oven cleaner in the cooking compartment

when it is still warm.

▶Remove all food remnants from the cooking com-

partment and the appliance door before you next

heat up the appliance.

Salt contained in new sponge cloths may damage sur-

faces.

▶Wash new sponge cloths thoroughly before use.

11.2 Suitable cleaning agents

Only use cleaning agents that are suitable for the differ-

ent surfaces on your appliance. Appliance exterior

Follow the instructions on cleaning the appliance.

Area Suitable cleaning agents Information

Stainless steel front ¡Hot soapy water

¡Special stainless steel clean-

ing products suitable for hot

surfaces

To prevent corrosion on stainless steel fronts, remove

any limescale, grease, starch and albumin (e.g. egg

white) stains immediately.

Apply a thin layer of the stainless steel cleaning product.

en Cleaning and servicing

14

Area Suitable cleaning agents Information

Control panel Hot soapy water Clean with a dishcloth and dry with a soft cloth.

Do not use glass cleaner or a glass scraper.

Door panels Hot soapy water Clean with a dishcloth and dry with a soft cloth.

Do not use a glass scraper or steel wool.

Door handle Hot soapy water Clean with a dishcloth and dry with a soft cloth.

To avoid permanent stains, remove descaling agents

from the door handle immediately.

Appliance interior

Area Suitable cleaning agents Information

Enamel surfaces ¡Hot soapy water

¡Vinegar solution

¡Oven cleaner

Clean with a dishcloth and dry with a soft cloth.

Soften burnt-on food residues with a damp cloth and

soapy water.

If there are heavy deposits of dirt, use a stainless steel

scouring pad or oven cleaner.

Leave the cooking compartment open to dry after clean-

ing.

Note:Food residues may cause white deposits to form.

The deposits are not a risk to health and do not affect

how the appliance works. You can remove the deposits

with lemon juice.

Self-cleaning surfaces Observe the instructions for the surfaces of the cooking

compartment that follow the table.

→"Cleaning self-cleaning surfaces", Page15

Glass cover for the

interior lighting

¡Hot soapy water

¡Oven cleaner

Clean with a dishcloth and dry with a soft cloth.

Use oven cleaner to remove very heavy soiling.

Door panels Hot soapy water Clean with a dishcloth and dry with a soft cloth.

Do not use a glass scraper or steel wool.

Tip:It is best to clean the door panels together with the

cooking compartment.

→"Cleaning the cooking compartment", Page15

Door seal Hot soapy water Clean with a dishcloth.

Do not remove or scrub the door seal.

Stainless steel door

cover Stainless steel cleaner Follow the manufacturers' instructions.

Do not use glass cleaner or a glass scraper.

Do not use stainless steel care products.

Tip:It is best to remove the door cover.

Plastic door cover Hot soapy water Do not use glass cleaner or a glass scraper.

Do not use stainless steel care products.

Tip:It is best to remove the door cover.

Rails Hot soapy water Soak and clean using a dishcloth or brush.

Pull-out system Hot soapy water Clean with a dishcloth or brush.

Clean the pull-out rails while they are pushed in so that

you do not remove the lubricant.

Do not clean in the dishwasher.

Accessories Hot soapy water Soak and clean using a dishcloth or brush.

If the accessory is heavily soiled, clean it with steel wool.

Tip:You can clean enamelled accessories in the dish-

washer.

Notes

¡Slight differences in colour on the front of the appli-

ance are caused by the use of different materials,

such as glass, plastic and metal.

¡Shadows on the door panels, which look like

streaks, are caused by reflections made by the in-

terior lighting.

¡Enamel is baked on at very high temperatures. This

may cause some slight colour variation. The colour

differences are normal and do not affect the func-

tionality. The edges of thin trays cannot be com-

pletely enamelled and may therefore be rough. This

does not impair the corrosion protection.

Cleaning and servicing en

15

11.3 Cleaning the appliance

Clean the appliance as specified. This will ensure that

the different parts and surfaces of the appliance are

not damaged by incorrect cleaning or unsuitable clean-

ing products.

WARNING‒Risk of burns!

The appliance and its parts that can be touched be-

come hot during use.

▶Caution should be exercised here in order to avoid

touching heating elements.

▶Young children under 8 years of age must be kept

away from the appliance.

WARNING‒Risk of fire!

Loose food remnants, fat and meat juices may catch

fire.

▶Before using the appliance, remove the worst of the

food residues and remnants from the cooking com-

partment, heating elements and accessories.

Requirement:Read the information on cleaning

products.

→"Cleaning products", Page13

1. Clean the appliance using hot soapy water and a

dish cloth.

For some surfaces, you can use alternative cleaning

agents.

→"Suitable cleaning agents", Page13

2. Dry with a soft cloth.

Tips

¡If you clean the cooking compartment after each

use, dirt cannot burn on.

¡Always remove limescale, grease, starch or albumin

stains immediately.

Note:Use the universal pan for baking very moist

cakes.

Tip:To keep the cooking compartment clean, use suit-

able ovenware for roasting, e.g. a roasting dish.

11.4 Cleaning the cooking compartment

WARNING‒Risk of burns!

The appliance and its parts that can be touched be-

come hot during use.

▶Caution should be exercised here in order to avoid

touching heating elements.

▶Young children under 8 years of age must be kept

away from the appliance.

Requirement:The cooking compartment has cooled

down completely.

1. Pour 0.4l of water into the centre of the cooking

compartment floor.

Do not use distilled water.

2. Use the function selector to set ⁠.

3. Use the temperature selector to set the temperature

to 50°C.

4. While cleaning, check that the water that is con-

densed in the drip trough below the appliance door

does not overflow.

‒If required, mop up the liquid with a sponge.

5. Switch off the appliance after 18 minutes.

6. Allow the appliance to cool down.

7. Clean the cooking compartment with a cloth.

11.5 Cleaning self-cleaning surfaces

The self-cleaning surfaces are coated with a porous,

matte ceramic layer. This coating absorbs and dispels

splashes from baking and roasting while the appliance

is in operation.

Requirement:The cooking compartment has cooled

down.

▶Brownish or whitish residues can be removed with

water and a soft sponge.

Note:Marks may appear on the self-cleaning surfaces.

Residues of sugars and proteins in the food are not re-

moved and stick to the surfaces. Red stains are

residues from salty food – they are not rust. The marks

are not hazardous to health. These marks do not im-

pair the cleaning ability of the self-cleaning surfaces.

11.6 Replacing the cooking compartment

bulb

If the cooking compartment light has failed, replace the

cooking compartment bulb.

Note:Heat-resistant, 230V, 40W, G9 halogen bulbs

are available from customer service or specialist retail-

ers. Only use these bulbs. Hold the new halogen bulbs

only with a clean, dry towel. This increases the service

life of the bulb.

WARNING‒Risk of burns!

The appliance and its parts that can be touched be-

come hot during use.

▶Caution should be exercised here in order to avoid

touching heating elements.

▶Young children under 8 years of age must be kept

away from the appliance.

WARNING‒Risk of electric shock!

When changing the bulb, the bulb socket contacts are

live.

▶Before replacing the bulb, ensure that the appliance

is switched off in order to prevent a potential electric

shock.

▶Also unplug the appliance from the mains or switch

off the circuit breaker in the fuse box.

Requirements

¡The fuse has been switched off.

¡The cooking compartment has cooled down.

¡You must have a new halogen lamp to replace the

old one.

1. Open the appliance door.

2. Place a tea towel in the cooking compartment to

prevent damage.

3. Remove the accessories from the cooking compart-

ment and remove the shelves. →Page16

4. Remove the glass cover.

If the glass cover is difficult to remove by hand, use

a spoon to help you.

en Rails

16

5. Pull out the cooking compartment bulb. 6. Replace the cooking compartment bulb with one of

the same type.

7. Refit the glass cover for the oven light bulb.

8. Install the rails. →Page16

9. Remove the tea towel again.

10. Switch on the fuse again.

11. Check that the oven lighting is working again.

Rails

12 Rails

Rails

To thoroughly clean the rails and the cooking compart-

ment, or to replace the rails, you can remove the rails.

12.1 Detaching the rails

The rails are each fixed to the side panels of the cook-

ing compartment at 3 points.

1. Grip the front of the rail and pull it round to the

middle of the cooking compartment.

aThe front hook of the rail comes out of the hole.

2. Swing the rail round further and pull it out of the rear

holes in the side panel.

3. Remove the rail from the cooking compartment.

12.2 Attaching the rails

1. Insert the hooks of the rail into the rear holes in the

side panel.

2. Push the front hook of the rail into the hole.

Appliance door

13 Appliance door

Appliance door

With good care and cleaning, your appliance retains its

appearance and remains fully functioning for a long

time to come. This will tell you how to clean the appli-

ance door.

Note:To ensure that the appliance door does not

come into contact with the fitted unit, the appliance

door opens slightly less than 90°.

13.1 Removing the door panels

To facilitate cleaning, you can remove the glass panels

from the appliance door.

WARNING‒Risk of injury!

Scratched glass in the appliance door may develop

into a crack.

▶Do not use any harsh or abrasive cleaners or sharp

metal scrapers to clean the glass on the oven door,

as they may scratch the surface.

1. Open the appliance door fully.

2. Use the security pins to lock the left- and right-hand

hinges.

The locking pins must be fully inserted into the

holes in the hinges.

3. Use both hands to lift the lower section of the inner

panel until the fastening pins come out of the

holder.

Appliance door en

17

4. ATTENTION!

When lifting the inner panel, the intermediate panel

may stick to the inner panel.

▶Ensure that the intermediate panel does not fall.

Carefully lift the top section of the inner panel until

the fastening pins come out of the holder.

5. Lift out the inner panel and set it down carefully on a

flat surface.

6. Remove the intermediate panel and its holders.

The intermediate panel is not secured using retain-

ing pins but rather using rubber mounts.

7. Clean the door panels with glass cleaner and a soft

cloth.

13.2 Fitting the door panels

1. Insert the intermediate panel.

Make sure that the intermediate panel is seated cor-

rectly.

aAll holders must lay flat against the outer panel.

aIf the Low E symbol can be read on the intermediate

panel, the intermediate panel has been inserted cor-

rectly.

2. Insert the inner panel.

All four fastening pins must engage in the holders

provided for them.

3. Remove the locking pins and close the appliance

door.

Note:Do not throw away the locking pins. Store the

locking pins in a secure location. You always require

the locking pins when you remove the door or door

panels from the appliance. If you do not have any lock-

ing pins, you can order these from customer service.

13.3 Detaching the appliance door

If it is particularly dirty, you can remove the appliance

door to clean it more thoroughly.

1. Open the appliance door fully.

2. Use the security pins to lock the left- and right-hand

hinges.

The locking pins must be fully inserted into the

holes in the hinges.

3. Grip the appliance door on either side with both

hands and close it by approx.30degrees.

Do not close the appliance door fully. The hinges

could become bent and the enamel could be dam-

aged.

4. Lift the appliance slightly and pull it out completely.

13.4 Attaching the appliance door

WARNING‒Risk of injury!

If the hinges are not secured due to an incomplete

lock, they can snap shut with great force.

▶If the hinge snaps shut when detaching or attaching

the appliance door, do not reach into the hinge.

▶Call customer service.

If a door pane or appliance door has not been installed

correctly, this is dangerous.

▶Make sure that all of the door panes and the appli-

ance door have been correctly fitted before you

switch the appliance back on again.

1. Grip the appliance door on either side with both

hands.

2. Slide the hinges into the slots in the appliance.

The notch below the hinges must engage into the

frame of the appliance.

3. Lower the appliance door downwards.

4. Remove the locking pins.

Note:Do not throw away the locking pins. Store the

locking pins in a secure location. You always require

the locking pins when you remove the door or door

panels from the appliance. If you do not have any lock-

ing pins, you can order these from customer service.

en Troubleshooting

18

Troubleshooting

14 Troubleshooting

Troubleshooting

You can rectify minor faults on your appliance yourself.

Read the troubleshooting information before contacting

after-sales service. This will avoid unnecessary costs.

WARNING‒Risk of injury!

Improper repairs are dangerous.

▶Repairs to the appliance should only be carried out

by trained specialist staff.

▶If the appliance is defective, call Customer Service.

→"Customer Service", Page19

WARNING‒Risk of electric shock!

Improper repairs are dangerous.

▶Repairs to the appliance should only be carried out

by trained specialist staff.

▶Only use genuine spare parts when repairing the

appliance.

▶If the power cord of this appliance is damaged, it

must be replaced by the manufacturer, the manufac-

turer's Customer Service or a similarly qualified per-

son in order to prevent any risk.

14.1 Malfunctions

Fault Cause and troubleshooting

The appliance is not

working. The mains plug of the power cord is not plugged in.

▶Connect the appliance to the power supply.

There has been a power cut.

▶Check whether the lighting in your room or other appliances are working.

The circuit breaker in the fuse box has tripped.

▶Check the circuit breaker in the fuse box.

The appliance does

not start. The appliance door is not fully closed.

▶Close the appliance door.

The appliance is not switched off.

▶Switch the appliance off and then on again.

: flashes on the

display. There has been a power cut.

▶Set the time.

→"Before using for the first time", Page10

The interior lighting

does not work. "Top/bottom heating gentle" mode is activated.

▶In this operating mode, the interior lighting is switched off.

The cooking compartment bulb is defective.

▶Change the cooking compartment bulb.

→"Replacing the cooking compartment bulb", Page15

Dishes that are

cooked in the oven

burn in a short time.

The thermostat is faulty.

▶Call

→"Customer Service", Page19.

Door panels are

steamed up. Normal occurrence caused by temperature differences.

▶Heat the appliance up to 100°C and switch the appliance off after 5minutes.

The appliance is

switched on but can-

not be operated.

lights up on the dis-

play.

The child safety lock is activated.

▶Deactivate the child safety lock.

→"Deactivating the child safety lock", Page12

The display has

frozen or does not re-

spond.

The child safety lock is activated.

▶Deactivate the child safety lock.

→"Deactivating the child safety lock", Page12

Malfunction

1. Switch off the fuse in the fuse box.

2. Switch the fuse on after appox. 10seconds.

3. If the malfunction occurs again, call customer service.

The door panels feel

warmer than before

after the door panels

have been removed

for cleaning.

The door panels have been inserted the wrong way round.

▶Check whether the door panels have been inserted correctly.

→"Fitting the door panels", Page17

Disposal en

19

Fault Cause and troubleshooting

The cooling fan con-

tinues to run after op-

eration.

Not a fault. The cooling fan continues to run until the temperature that is selected in the ba-

sic settings has been reached.

→"Basic settings", Page12

Condensation water

on the appliance

door or condensation

water is dripping.

The appliance door does not close correctly.

▶Check whether the appliance door is installed correctly and closes correctly.

→"Appliance door", Page16

Dirt on the seal.

1. Check whether the seal is dirty, damaged or seated incorrectly.

2. Clean or replace the seal, or ensure that it is seated correctly.

Normal condensation.

→"Condensation", Page8

A message with ap-

pears on the display. Malfunction

▶Set the function selector to the off position.

If the error message does not disappear, contact customer service.

Disposal

15 Disposal

Disposal

15.1 Disposing of old appliance

Valuable raw materials can be reused by recycling.

▶Dispose of the appliance in an environmentally

friendly manner.

Information about current disposal methods are

available from your specialist dealer or local author-

ity.

This appliance is labelled in accord-

ance with European Directive

2012/19/EU concerning used elec-

trical and electronic appliances

(waste electrical and electronic equip-

ment - WEEE).

The guideline determines the frame-

work for the return and recycling of

used appliances as applicable

throughout the EU.

Customer Service

16 Customer Service

Customer Service

Function-relevant genuine spare parts according to the

corresponding Ecodesign Order can be obtained from

Customer Service for a period of at least 10 years from

the date on which your appliance was placed on the

market within the European Economic Area.

Note:Under the terms of the manufacturer's warranty

the use of Customer Service is free of charge.

Detailed information on the warranty period and terms

of warranty in your country is available from our after-

sales service, your retailer or on our website.

If you contact Customer Service, you will require the

product number (E-Nr.) and the production number

(FD) of your appliance.

The contact details for Customer Service can be found

in the enclosed Customer Service directory or on our

website.

This product contains light sources from energy effi-

ciency class G.

16.1 Product number (E-Nr.) and production

number (FD)

You can find the product number (E-Nr.) and the pro-

duction number (FD) on the appliance's rating plate.

You will see the rating plate with these numbers if you

open the appliance door.

Make a note of your appliance's details and the Cus-

tomer Service telephone number to find them again

quickly.

How it works

17 How it works

How it works

You can find a selection of tips about cookware and

preparing meals here. 17.1 What is the best way to proceed?

ATTENTION!

Acidic food may damage the grid

▶Do not place acidic food, such as fruit or food with

an acidic marinade directly on the pan support.

en How it works

20

Note:Information for those allergic to nickel

In rare cases, small amounts of nickel may pass into

the food.

1. Before using the appliance, remove all unnecessary

cookware from the cooking compartment.

2. Select the desired food from the recommended set-

tings.

3. Place the food in suitable cookware.

Use the accessory provided.

4. Only preheat the appliance if the recipe or the re-

commended settings tell you to do so. Do not line

the accessory with greaseproof paper until after it

has been preheated.

5. Set the appliance in accordance with the recom-

mended settings.

Set the shorter cooking time first. If required, in-

crease the duration.

6. Always keep the appliance door closed when cook-

ing.

17.2 Baking tips

We have compiled a few tips to help you achieve a

good baking result.

Issue Tip

You want your cake to

rise evenly.

¡Only grease the base

of the springform cake

tin.

¡After baking, use a

knife to carefully

loosen the cake from

the baking tin.

You do not want small

baked items to stick to

each other when baking.

Leave a minimum clear-

ance of 2cm around

each item to be baked.

This allows enough space

for the baked items to ex-

pand and brown on all

sides.

Determine whether the

cake is ready. Push a cocktail stick into

the highest point on the

cake. If no dough sticks

to the wood, the cake is

ready.

You want to bake using

your own recipe. Use similar items in the

baking tables as a guide.

Use bakeware made of

silicone, glass, plastic or

ceramic.

¡The bakeware must be

heat-resistant up to

250 °C.

¡Cakes in this bake-

ware brown less.

17.3 Food table

You can find an overview of the food here.

Food Weight in kg Shelf position Type of heating Temperature in

°C/grill setting Duration in

mins

Lasagne 3 – 4 1 220 – 230145 – 50

Pasta bake 3 – 4 1 220 – 230145 – 50

Joint of veal 2 2 180 – 190190 – 100

Pork loin 1.5 – 2 2 190 – 200190 – 100

Pork loin 2 2 2002125

Sausages 1.5 3 28011st side: 10

2nd side: 7

Roast beef 1 2 200145 – 55

Roast rabbit 1.5 2 180 – 190170 – 80

Turkey breast 2 2 180 – 1901110 – 120

Pork neck joint 2 – 3 2 180 – 1901170 – 180

Roast chicken 1.2 2 190 – 200165 – 70

Pork chops 1.5 3 28011st side: 15

2nd side: 5

Spare ribs 1.5 3 28011st side: 15

2nd side: 10

Bacon 0.7 4 311st side: 10

2nd side: 8

Fillet of pork 1.5 3 28011st side: 12

2nd side: 5

Fillet of beef 1 4 311st side: 7

2nd side: 4

1Preheat the appliance.

2Do not preheat the appliance.

Sayfa yükleniyor ...

Siemens VB558C0S0/02 Kullanım kılavuzu

Bu kılavuz için de uygundur

Siemens VB558C0S0/02 Kullanım kılavuzu

Diğer dillerde