Dell Latitude E4200 El kitabı

D e l l ™ Latitude™ E4200 | Media Base

Dell™ Latitude™ E4200 | Medijska osnova

Multimediální stanice | Dell™ Latitude™ E4200

Βάση µέσων | Dell™ Latitude™ E4200

Dell™ Latitude™ E4200 | Médiabázis

Dell™ Latitude™ E4200 | Stacja bazowa

Dell™ Latitude™ E4200 | Baza pentru suporturi optice

Стыковочная станция Dell™ Latitude™ E4200 | Media Base

Dell™ Latitude™ E4200 | Mediálna základňa

Dell™ Latitude™ E4200 | Medijska baza

Dell™ Latitude™ E4200 | Ortam Tabanı

Dell™ Latitude™ E4200 |

 

fc.fm Page 1 Wednesday, August 6, 2008 10:03 AM

www.dell.com | support.dell.com

Dell™ Latitude™ E4200 Media Base

Model PR15S

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of

your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data

and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury,

or death.

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Inc.; Microsoft

and Windows are registered trademarks of Microsoft Corporation in the United States and/or other

countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Model PR15S

July 2008 P/N R962J Rev. A00

Media Base 3

Media Base

The media base provides media capacity to your Dell™

Latitude™ E4200

.

The media base attaches to the bottom of the computer.

Top View

1 docking connector 2 release tabs (2)

3 release lever 4 attachment hooks

1

4

2

3

4 Media Base

Side View

Back View

1 media drive

1USB ports (2)

1

Media Base 5

Docking Your Computer to the Media Base

1

Before you initially dock your computer, the operating system must

complete its setup process. To verify that the operating system setup

is complete:

a

Ensure that the computer is not connected to the media base.

b

Turn on the computer.

c

Verify that the Microsoft

®

Windows

®

desktop appears.

d

Shut down the computer through the Windows

Start

menu.

2

Align the front of the computer with the front of the media base and lower

the computer onto the media base.

1 front of computer 2 media base

2

1

6 Media Base

3

Gently press the computer into the media base until it clicks into place.

NOTE: Your computer should be turned off only when you dock your computer

for the first time.

4

Turn on the computer.

The operating system recognizes the media base.

Undocking Your Computer From the Media Base

1

Before you undock your computer, save and close any open files, and exit

any open programs.

2

Pull the release lever toward the front of the computer.

3

Lift the computer out of the media base.

Media Base 7

Removing the Media Drive From the Media Base

1

Locate the screw in the middle of the media base on the same side

as the docking connector, and remove the screw.

2

Slide the media drive out of the media base.

1 media drive 2 docking connector

3 screw 4 media base

3

1

2

4

8 Media Base

Replacing the Media Drive in the Media Base

1

Slide the media drive into the media base.

2

Replace the screw on the media base that holds the media drive in place.

Connecting and Disconnecting External Drives

• To connect an external drive such as a CD, CD-RW, or DVD/CD-RW

drive while the computer is off, connect the drive cable to the USB

connector on the media base (see “Back View” on page 4).

• To disconnect an external drive while the computer is turned off,

remove the drive cable from the USB connector.

• To connect and disconnect drives while the computer is on, see “Swapping

External Drives While the Computer Is On” on page 8.

NOTICE: To prevent damage to external drives, store them in a safe, dry place

when they are not connected to the computer. Avoid pressing down on them or

placing heavy objects on top of them while in storage.

Swapping External Drives While the Computer

Is On

1

Double-click the

Unplug or Eject Hardware

icon on the Windows taskbar.

2

Click the drive you want to eject.

3

Remove the drive cable from the USB connector.

4

Connect the new drive by connecting the drive cable to the USB

connector.

The operating system recognizes the new drive.

If necessary, enter your password to unlock your computer.

Media Base 9

Specifications

Finding Information

NOTE: Some features may not be available for your media base or your computer

or in certain countries.

NOTE: Additional information may ship with your media base or your computer.

Physical

Height 12.5 mm (0.5 inch)

Width 278.2 mm (10.95 inches)

Depth 190.5 mm (7.5 inches)

Weight 435.8 g (0.97 lb)

Ports and Connectors

USB two 4-pin USB-compliant connectors

E-family docking 144-pin connector

Document/Media/Label Contents

Service Tag/Express Service Code

The Service Tag/Express Service Code

is located on your computer.

• Use the Service Tag to identify your

computer when you use

support.dell.com

or contact support.

• Enter the Express Service Code to direct

your call when contacting support.

Computer Setup Instructions

and Quick Reference Information

The Setup and Quick Reference Guide

may have shipped with your computer.

• General setup instructions for your

computer

• Technical specifications for your

computer

• Troubleshooting and software

information

10 Media Base

Drivers and Utilities Media

The Drivers and Utilities media is a CD

or DVD that may have shipped with your

computer.

• A diagnostic program for your computer

• Drivers for your computer

NOTE: Drivers and documentation updates

can be found at support.dell.com.

Safety, Regulatory, Warranty, and

Support Documentation

This type of information may have

shipped with your computer. For

additional regulatory information, see the

Regulatory Compliance Homepage on

www.dell.com at the following location:

www.dell.com/regulatory_compliance.

• Warranty information

• Terms and Conditions (U.S. only)

• Safety instructions

• Regulatory information

• Ergonomics information

• End User License Agreement

Document/Media/Label Contents

www.dell.com | support.dell.com

Dell™ Latitude™ E4200

Medijska osnova

Model PR15S

book.book Page 11 Friday, August 1, 2008 12:53 PM

Napomene, obavijesti i oprezi

NAPOMENA: NAPOMENA ukazuje na važne informacije koje

vam pomažu da koristite svoje računalo na bolji način.

OBAVIJEST: OBAVIJEST označava moguće oštećenje hardvera

ili gubitak podataka i otkriva kako izbjeći neki problem.

OPREZ: OPREZ označava moguće oštećenje imovine, osobne

ozljede ili smrt.

____________________

Informacije u ovom dokumentu podložne su promjeni bez prethodne najave.

Bilo kakvo umnožavanje bez pismene dozvole tvrtke Dell Inc. strogo je zabranjeno.

Trgovačke marke korištene u ovom tekstu: Dell, logotip DELL i Latitude su trgovačke marke Dell Inc.;

Microsoft i Windows su registrirane trgovačke marke korporacije Microsoft u Sjedinjenim Državama

i/ili drugim zemljama.

Ostali zaštitni znakovi i zaštićeni nazivi koji se koriste u ovom dokumentu označavaju ili entitete koji

su vlasnici tih znakova ili njihove proizvode. Tvrtka Dell Inc. odriče se bilo kakvih vlasničkih interesa

za navedene trgovačke znakove i zaštićene nazive, osim vlastitih.

Model PR15S

Srpanj 2008 B/D R962J Izmijenjeno izdanje A00

book.book Page 12 Friday, August 1, 2008 12:53 PM

Medijska osnova

13

Medijska osnova

Medijska osnova pruža medijske mogućnosti vašem računalu Dell™

Latitude™ E4200

. Medijska osnova priključuje se na podnožje računala.

Pogled odozgora

1 priključak za spajanje 2 jezičci za otpuštanje (2)

3 poluga za otpuštanje 4 kuke za pričvršćivanje

1

4

2

3

book.book Page 13 Friday, August 1, 2008 12:53 PM

14

Medijska osnova

Pogled sa strane

Pogled straga

1 medijski pogon

1 USB priključci (2)

1

book.book Page 14 Friday, August 1, 2008 12:53 PM

Medijska osnova

15

Postavljanje računala na medijsku osnovu

1

Prije nego što prvi puta priključite svoje računalo, operacijski sustav

mora dovršiti postupak postavljanja. Da biste provjerili je li postavljanje

operacijskog sustava završeno:

a

Uvjerite se da računalo nije spojeno na medijsku osnovu.

b

Uključite računalo.

c

Provjerite prikazuje li se radna površina Microsoft

®

Windows

®

.

d

Isključite računalo pomoću izbornika Windows

Start

.

2

Poravnajte prednji dio računala s prednjim dijelom medijske osnove

i spustite računalo u medijsku osnovu.

1 prednja strana računala 2 medijska osnova

2

1

book.book Page 15 Friday, August 1, 2008 12:53 PM

16

Medijska osnova

3

Lagano pritisnite računalo u medijsku osnovu dok ne sjedne na mjesto.

NAPOMENA:

Vaše računalo treba biti isključeno samo kada prvi puta

postavljate računalo na medijsku osnovu.

4

Uključite računalo.

Operacijski sustav prepoznaje medijsku osnovu.

Isključivanje računala s medijske osnove

1

Prije isključivanja računala, spremite i zatvorite otvorene datoteke i izađite

iz otvorenih programa.

2

Povucite polugu za otpušanje prema prednjem dijelu računala.

3

Podignite računalo iz medijske osnove.

book.book Page 16 Friday, August 1, 2008 12:53 PM

Medijska osnova

17

Uklanjanje medijskog pogona

iz medijske osnove

1

Pronađite vijak u sredini medijske osnove na istoj strani na kojoj se nalazi

priključak za računalo i uklonite ga.

2

Povucite medijski pogon iz medijske osnove.

1 medijski pogon 2 priključak za spajanje

3 vijak 4 medijska osnova

3

1

2

4

book.book Page 17 Friday, August 1, 2008 12:53 PM

18

Medijska osnova

Zamjena medijskog pogona

u medijskoj osnovi

1

Izvucite medijski pogon iz medijske osnove.

2

Vratite vijak koji drži medijski pogon na mjestu na medijsku osnovu.

Priključivanje i isključivanje vanjskih

pogona

•

Da biste priključili vanjski pogon kao što je CD, CD-RW ili DVD/CD-RW

pogon dok je računalo isključeno, priključite kabel pogona na USB

priključak na medijskoj osnovi (pogledajte „Pogled straga“ na stranici 14).

•

Da biste isključili vanjski pogon dok je računalo isključeno, isključite kabel

pogona iz USB priključka.

•

Da biste priključili i isključili pogone dok je računalo uključeno, pogledajte

„Zamjena vanjskih pogona dok je računalo Uključeno“ na stranici 18.

OBAVIJEST:

Da biste spriječili nastanak oštećenja na vanjskim pogonima,

pohranite ih na suhom mjestu kada nisu priključeni na računalo. Nemojte

ih pritiskati ili na njih stavljati teške predmete dok su odloženi.

Zamjena vanjskih pogona

dok je računalo Uključeno

1

Dvaput kliknite ikonu

Isključi ili izbaci hardver

na traci zadataka sustava

Windows.

2

Kliknite pogon koji želite izbaciti.

3

Uklonite kabel pogona iz USB priključka.

4

Priključite novi pogon tako da kabel pogona uključite u USB priključak.

Operacijski sustav prepoznaje novi pogon.

Ako je potrebno, unesite lozinku da biste otključali računalo.

book.book Page 18 Friday, August 1, 2008 12:53 PM

Sayfa yükleniyor ...

Dell Latitude E4200 El kitabı

Dell Latitude E4200 El kitabı

Diğer dillerde