Yamaha DP-U50 El kitabı

PERSONAL AMPLIFIER

AP-U70

PERSONAL SOUND PROCESSOR

DP-U50

SET UP MANUAL

MANUEL DE CONFIGURATION

SET UP-HANDBUCH

INSTALLATIONSANVISNING

MANUALE DI IMPOSTAZIONE

MANUAL DE CONFIGURACIÓN

INSTALLATIEHANDLEIDING

G B

USB

PC

AUX1

AUX2

DSP MUTE

The owner’s manual for this model consists of two volumes, “SET UP MANUAL” and

“OPERATION MANUAL”.

Le manuel d'utilisation pour ce modèle se compose de deux volumes, le “MANUEL DE

CONFIGURATION” et le “MANUEL D’UTILISATION”.

Die Anleitung für dieses Modell besteht aus zwei Teilen: aus dem “SET UP-HANDBUCH” und der

“BEDIENUNGSANLEITUNG”.

Bruksanvisning för denna apparat består av två delar: “INSTALLATIONSANVISNING”och

“BRUKSANVISNING”

Il manuale di questo modello è composto da due libretti, “MANUALE DI IMPOSTAZIONE” e

“MANUALE DELLE ISTRUZIONI”

El manual de propietario para este modelo consta de dos volúmenes, “MANUAL DE

CONFIGURACIÓN” y “MANUAL DE OPERACIONES”

De gebruiksaanwijzing voor dit model bestaat uit twee handleidingen, de

“INSTALLATIEHANDLEIDING ” en de “BEDIENINGSHANDLEIDING”

* This manual uses terms utilized by the English operating system as shown on the computer monitor. If the operating

system you are using is in another language, please replace the English terms with the terms used in your computer’s

operating system.

* Ce manuel utilise des termes employés par les systèmes d’exploitation en langue anglaise tels qu’ils apparaîssent sur le

moniteur d’un ordinateur. Si votre système d’exploitation utilise une autre langue, veuillez remplacer la terminologie

anglaise par celle qu’il utilise.

* In dieser Anleitung werden Ausdrücke verwendet, die – wie auf dem Computermonitor angezeigt – vom englischen

Betriebssystem genutzt werden. Wenn Sie ein anderssprachiges Betriebssystem verwenden, ersetzen Sie bitte die

englischen Ausdrücke durch die von Ihrem Betriebssystem verwendeten Ausdrücke.

* I bruksanvisningen används termerna från det engelska operativsystemet för datorn. Om ditt operativsystem använder ett

annat språk, måste du ersätta de engelska termerna med de termer som gäller på språket som används.

* Questo manuale utilizza dei termini utilizzati dal sistema operativo inglese, come è indicato sul monitor del computer. Se il

sistema operativo del vostro computer è in un’altra lingua, sostituite i termini in inglese da quelli usati nel sistema

operativo del vostro computer.

* Este manual utiliza términos utilizados por el sistema operativo en inglés, tal como se muestran en el monitor. Si el

sistema operativo que está utilizando está en otro idioma, sustituya por favor los términos en inglés por los términos

utilizados en el sistema operativo de su ordenador.

* In deze handleidingen worden de termen van het Engelstalige besturingssysteem gebruikt zoals ze op het

computerscherm verschijnen. Als u een besturingssysteem in een andere taal gebruikt, gelieve dan de Engelse termen te

vervangen door de termen die in het besturingssysteem van uw computer worden gebruikt.

E-1

● This unit brings high-quality audio to your

computer.

● The USB interface allows remote control of this

unit from your computer, using the supplied

Application Software, plus various audio I/O

options.

● Ideal for use with computer games, internet

music, CD-ROM, DVD, multimedia software, and

more.

● Yamaha’s Near-Field Cinema DSP (Digital Sound

field Processing) technology provides live music

performance and movie theater surround sound.

The sound effect of DSP is also available for

headphone listening.

● Sophisticated Virtual 3D technology reproduces

multichannel sources such as Dolby Digital* and

DTS

** providing a realistic surround effect with

just two speakers.

● This unit is compatible with the following audio

signals received via a USB connection:

multi-channel (two, four and six channels) audio,

high quality digital audio of 24 bits/48 kHz and

Dolby Digital-encoded signals. (Some operating

systems and software programs do not support

this feature.)

*

Manufactured under license from Dolby Laboratories. “Dolby”,

“Pro Logic” and the double-D symbol are trademarks of Dolby

Laboratories. Confidential Unpublished Works. q1992–1997

**

Manufactured under license from Digital Theater Systems, Inc.

US Pat. No. 5,451,942 and other world-wide patents issued and

pending. “DTS”, “DTS Digital Surround”, are trademarks of Digital

CONNECTIONS

Terminals and their functions ........... 3

Connecting your computer................ 4

Connecting audio equipment ............ 5

Connecting speakers ......................... 6

Plugging in this unit ........................... 8

INSTALLING USB DRIVER AND

APPLICATION SOFTWARE

Preparations before installation........ 9

System requirements......................... 9

Installing the software...................... 10

Microsoft Windows 98/98SE

or Windows Me ............................................... 10

Microsoft Windows 2000 Professional ......... 13

Macintosh computer ...................................... 16

APPENDIX

Troubleshooting ......................... 18

CONNECTIONS

INSTALLING USB DRIVER AND

APPLICATION SOFTWARE

APPENDIX

English

GETTING STARTED

Unpacking........................................... 2

Battery installation ............................. 2

Battery replacement........................... 2

Remote control operation range ....... 2

GETTING STARTED

FEATURES CONTENTS

E-2

GETTING STARTED

Battery installation

Since the remote control will be used for many of this unit’s

control operations, you should begin by installing the

supplied batteries.

1

Turn the remote control over and remove the battery

compartment cover by sliding it in the direction of

the arrow.

2

Insert the batteries (AA, R6, UM-3 type) according to

the polarity markings on the inside of the battery

compartment.

3

Close the battery compartment cover.

Battery replacement

If you notice that the remote control must be used closer to

the main unit, the batteries are weak. Replace both

batteries with new ones.

Notes

● Use AA, R6, UM-3 batteries.

● Be sure the polarities are correct. (See the illustration inside

the battery compartment.)

● Remove the batteries if the remote control is not to be used for

an extended period of time.

● If the batteries leak, dispose of them immediately. Avoid

touching the leaked material and avoid contact with clothing,

etc. Clean the battery compartment thoroughly before

installing new batteries.

USB

POWER

PC

AUX1

AUX2

JAZZ CHURCHHALL

B

VOLUMEMUTE

CA

MOVIE LIVEGAME

TEST

ON

/

OFF

VDD

2

1

3

Remote control operation range

Notes

● The area between the remote control and the main unit must

be clear of large obstacles.

● Do not expose the remote control sensor to strong lighting, in

particular, an inverter type fluorescent lamp; otherwise, the

remote control may not work properly. If necessary, position

the main unit away from direct lighting.

USB

PC

AUX1

AUX2

DSP MUTE

VOL

VIRTUAL

5.I

CH

DIGITAL

PROLOGIC FMAM ST

USB PCM D.

DSP

30°

Remote control

sensor

Unpacking

After unpacking, check that the following items are

supplied.

● Remote control

● CD-ROM

The CD-ROM contains

the Application Software

and online help for

controlling this unit from

your computer.

● Batteries (AA, R6, UM-3

type)

● USB cable

Within

approximately

6 m (19.7 feet)

E-3

English

CONNECTIONS

Never

plug in this unit and other equipment until

all connections are completed.

1.

Make connections between this unit and other

components by following the procedure below.

2.

After all connections are finished, check that the

connection cords are correctly connected.

3.

After all connections are completed, plug in this unit and

other equipment.

Note

Also, refer to the owner’s manual for other equipment in the

system.

CONNECTIONS

Terminals and their functions

1 ANALOG inputs

These connectors are used to connect to the analog

outputs of a PC sound card, CD player, MD recorder, tape

deck, etc.

+–

R

L

R L

ANALOG

PC IN

AUX 1

IN

AUX 2

IN

REC

OUT

OUTPUT

SUB

WOOFER

DIGITAL

USB

COAX

IN

OPT

IN

AUX 1

OPT IN

OPT

OUT

PC

SPEAKERS

6Ω MIN.

/

SPEAKER

MAINS

MAIN

1

2

5

6

3

4

PRE

OUT

[

DP-U50

]

REC

OUT

[

AP-U70

]

2 SUBWOOFER OUTPUT

This connector can be connected to an optional subwoofer,

such as the Yamaha YST-SW45, for enhanced bass

performance.

3 SPEAKERS outputs [AP-U70 only]

These connectors are used to connect a pair of

speakers, such as the Yamaha NS-U30.

4 REC OUT [AP-U70 only]

These connectors are used to connect to the

analog inputs of an MD recorder or tape deck.

4 PRE OUT [DP-U50 only]

These connectors are used to connect to the

analog inputs (INPUT etc.) of speakers

incorporated with an amplifier, or a power amplifier.

The level of signals outputted from the PRE OUT

varies by the use of the volume control on the front

panel or the VOLUME keys on the remote control.

5 PC inputs & output (DIGITAL)

USB: If your computer has a USB port, connect it to this

unit, using the supplied USB cable, for remote control of

this unit from your computer.

PC COAX IN/OPT IN: These coaxial and optical

connectors are used to connect to the digital outputs of a

PC sound card, DVD-Video decoder board, etc.

6 Optical input & output (DIGITAL)

AUX 1 OPT IN: This connector is used to connect to an

optical output of a CD player, MD recorder, etc.

OPT OUT: This connector is used to connect to an optical

input of an MD recorder, a DAT deck, etc.

Use commercially available connection cords (except the supplied USB cable).

The color of this unit’s inputs/outputs and connection cords to be used for connecting to them are as follows:

White Audio connection cord (analog/stereo), left

Red Audio connection cord (analog/stereo), right

Black Audio connection cord (analog/monaural)

Orange Coaxial digital connection cord

L

R

L

R

E-4

CONNECTIONS

Connecting to the USB port (1)

If your computer has a USB port, connect it to this unit’s

USB terminal using the supplied USB cable, as shown

below.

A single USB connection is all that’s required to listen to

audio from your computer on this unit, feed audio from an

external source connected to this unit to your computer,

and control this unit remotely from your computer, using

the supplied Application Software.

If your computer doesn’t have a USB port, you can still

connect it to this unit using the analog or digital input, but in

this case you cannot use this unit’s Application Software.

Note

Connect the USB cable when installing the USB driver software

on your computer. Refer to the section “INSTALLING USB

DRIVER AND APPLICATION SOFTWARE”.

Connecting to analog inputs (2)

Connect the analog audio outputs on your computer or a

PC sound card to this unit’s ANALOG PC IN.

Use a commercially available pin-plug connection cord for

connection, and be careful not to mix up the left and right

connections.

Connecting your computer

Audio from your computer can be fed to this unit using any of the following connectors: USB, DIGITAL PC COAX IN, DIGITAL

PC OPT IN, or ANALOG PC IN. If you use all of these connectors for connection, you can select the connector(s) to use on

this unit’s front panel or the remote control.

R L

ANALOG

PC IN

AUX 1

IN

AUX 2

IN

REC

OUT

OUTPUT

SUB

WOOFER

DIGITAL

USB

COAX

IN

OPT

IN

AUX 1

OPT IN

OPT

OUT

PC

LINE OUT

USB

DIGITAL

OUT

DIGITAL

OUT

2

1

3

L

R

L

R

(coaxial)

(optical)

Connecting to digital inputs (3)

To play DVD-Video discs encoded with Dolby Digital or

DTS, your computer must have a DVD-ROM drive and

DVD-Video decoder board, which should be connected to

this unit via the DIGITAL PC COAX IN or DIGITAL PC OPT

IN.

Use a commercially available pin-plug cord for connecting

to the DIGITAL PC COAX IN, and use a commercially

available optical fiber cable for connecting to the DIGITAL

PC OPT IN.

Note

The DIGITAL PC OPT IN has priority over the DIGITAL PC

COAX IN, so if you connect to both inputs, the signal received at

the DIGITAL PC OPT IN is used.

Protective Caps

When connecting to an optical connector, remove its protective

cap first. When an optical connector is not being used, replace its

cap to prevent dust entering the connector.

: Indicates the direction of signals.

E-5

English

CONNECTIONS

Connecting audio equipment

The following illustrations show how to connect a CD player, MD recorder, etc. using both analog and digital connections.

However, it’s not necessary to make both connections.

R L

ANALOG

PC IN

AUX 1

IN

AUX 2

IN

REC

OUT

OUTPUT

SUB

WOOFER

DIGITAL

USB

LINE OUT

LINE IN

(REC)

LINE OUT

(PLAY)

L

R

L

R

L

R

L

R

L

R

L

R

+–

R

L

DIGITAL

USB

COAX

IN

OPT

IN

AUX 1

OPT IN

OPT

OUT

PC

SPEAKERS

6Ω MIN.

/

SPEAKER

MAIN

DIGITAL OUT

DIGITAL IN

(optical)

CD player

MD recorder

CD player

Tape deck

or MD recorder

Audio connections

● Be careful not to mix up the left and right connections.

● [AP-U70 only]

If you wish to record analog sound signals inputted

to this unit, connect the analog inputs of a tape deck

or MD recorder to this unit’s REC OUT OUTPUT.

Digital connections

If you wish to record digital sound signals inputted to this

unit, connect the optical digital input of an MD recorder or a

DAT deck to this unit’s DIGITAL OPT OUT.

Notes

● When playing an ordinary CD on this unit following

playback of a CD or an LD encoded with DTS, some

operations, such as resetting the input selector keys, may be

required.

● Even if connected to this unit with a digital connection, some

CD, LD, and DVD players may make this unit fail to decode

DTS or produce noise. This is because certain digital output

data processing by such a player results in DTS-encoded data

errors that cause playback failure although the same data

processing may cause only a slight change in volume or in

frequency response in normal digital sound.

● When an error occurs in the player’s digital output data

during playback of an LD or CD encoded with DTS,

playback may be disrupted. If this occurs, stop playback and

repower the player.

● When digital sound signals from the computer are played,

errors in WAVE signals, etc. may occur resulting in noise or a

playback failure.

: [AP-U70 only]

Notes

● Connecting a turntable

A turntable cannot be connected to this unit directly. Use a

commercially available phono equalizer amplifier to connect a

turntable to this unit, or connect a turntable incorporated with a

phono equalizer amplifier.

● [AP-U70 only]

The REC OUT OUTPUT and DIGITAL OPT OUT can

be used at the same time since they output signals

independently.

E-6

CONNECTIONS

+–

R

L

R L

ANALOG

PC IN

AUX 1

IN

AUX 2

IN

REC

OUT

OUTPUT

SUB

WOOFER

DIGITAL

USB

COAX

IN

OPT

IN

AUX 1

OPT IN

OPT

OUT

PC

SPEAKERS

6Ω MIN.

/

SPEAKER

MAIN

Left speaker Right speaker

10 mm

➁

➂

➀

Connecting speakers

[AP-U70 only]

Connect this unit to your speakers with speaker cables

with a proper gauge (keep them as short as possible).

Notes

● Use speakers which do not have a built-in amplifier.

● Use speakers whose impedance is 6Ω or more.

● Connect the left speaker to the left speaker connector on this

unit and the right speaker to the right speaker connector.

● Make sure that the + and – polarity markings of the speaker

cables are observed and set correctly. If these cables are

reversed, the sound will be unnatural and lack bass.

Speaker Cables

Strip 10 mm of insulation off the end of each speaker

cable, and then twist the bare wires to prevent lose

strands, which can cause short circuits.

How to connect:

1 Press and hold the speaker connector levers.

2 Insert the bare ends of the speaker cables into the

terminal holes.

3 Then release the levers.

* Try pulling gently on each cable to make sure that it is

secure.

E-7

English

CONNECTIONS

R L

ANALOG

PC IN

AUX 1

IN

AUX 2

IN

PRE

OUT

OUTPUT

SUB

WOOFER

DIGITAL

USB

INPUT

L

R

L

R

R L

ANALOG

PC IN

AUX 1

IN

AUX 2

IN

REC

OUT

OUTPUT

SUB

WOOFER

DIGITAL

USB

SUPERWOOFER SYSTEM YST-SW45

HIGH CUTSTANDBY/ON

150Hz50Hz

VOLUME

100

LINE IN

Speakers with a built-in

amplifier

Subwoofer

Left Right

[DP-U50 only]

To reproduce sound signals inputted to this unit over

speakers, connect this unit to speakers with a built-in

amplifier, a mini-component system, etc., or connect this

unit to speakers by using an external power amplifier.

Connect the analog inputs of speakers with a built-in

amplifier, etc. to this unit’s PRE OUT using a commercially

available analog pin-plug cord or a pin (stereo)-to-mini

(stereo) plug cord.

Note

The level of signals outputted from the PRE OUT varies by the

use of the volume control on the front panel or the VOLUME

keys on the remote control. So, it is recommended to adjust the

speaker output level on this unit or the remote control, and fix

the volume of speakers with a built-in amplifier, etc. at a

certain level.

Adding a subwoofer

Bass performance can be extended by connecting a

subwoofer to this unit’s SUBWOOFER OUTPUT using a

commercially available audio pin-plug cord.

The use of a subwoofer is also suitable for reproducing the

effects of sound field programs.

Note

The SUBWOOFER OUTPUT is a line-level output. Use a

subwoofer which has its own built-in power amplifier, such as

the Yamaha YST-SW45.

E-8

CONNECTIONS

SUPERWOOFER SYSTEM YST-SW45

HIGH CUTSTANDBY/ON

150Hz50Hz

VOLUME

100

USB

PC

AUX1

AUX2

DSP MUTE

VOL

VIRTUAL 5.ICH

DIGITAL

PROLOGICFMAMST

USBPCM D.

DSP

4

3

Left speaker Right speaker

AC outlet

Recommended listening position

Note

Use magnetically shielded speakers and subwoofer. Using non-

magnetically shielded speakers near the computer monitor may

impair picture color or damage the monitor.

Plugging in this unit

After completing all connections, plug the AC power

cord into a household AC outlet.

Note

Unplug the AC power cord from the AC outlet if this unit is not

to be used for a long period of time.

(U.S.A. model)

Recommended Speaker Placement

For best performance, place the left and right speakers on

either side of your computer monitor, as shown below, and

position them so that their fronts are flush with the monitor

screen. To get the best from the sound field programs and

surround effects, the left and right speakers and the

listener should be positioned so as to form a triangle with a

3:4 ratio, so if, for example, the speakers are 60 cm (23.5”)

apart, the listener should be 80 cm (31.5”) away from each

speaker.

If your system includes a subwoofer (YST-SW45, etc.),

place it on the floor.

E-9

English

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

INSTALLING USB DRIVER AND

APPLICATION SOFTWARE

Microsoft Windows 98/98SE, Windows Me or

Windows 2000 Professional

Operating System

Microsoft Windows 98/98SE, Windows Me or Windows

2000 Professional

Computer

A computer with a USB port as a standard equipment and

preinstalled with the above OS.

Windows is a registered trademark of Microsoft Corporation in

the United States and/or other countries.

When connecting this unit and your computer with the USB

cable and controlling this unit from the computer, you must

install the following software on your computer.

◆ USB driver software: Necessary for this unit to

communicate with your computer .......... Use the

software originally supplied with the OS (Operating

System) running on your computer

◆ Application Software: Used to control this unit from a

computer .......... Download from the supplied CD-ROM

◆ Online help : Instructions for using the Application

......... Access from the supplied CD-ROM

This section explains how to install the software. The

installation method differs from the OS running on your

computer.

Refer to the instructions suitable for your OS below.

Preparations before installation

● Make sure that the USB cable is not connected to

this unit and that your computer is not activated.

● Make sure that your computer meets the system

requirements listed below.

If your computer does not meet the system

requirements, you can use the computer as an input

source by connecting it to the analog or digital input(s)

of this unit. In that case, however, the supplied

Application Software cannot be used.

● You may be requested to insert your OS’s CD-ROM

during the installation, so please have it ready before

commencing.

● The installing method may differ from the instructions

below depending on the operating environment of your

computer. In such a case, follow the instructions shown

on the monitor. If you still have any question, inquire at

the manufacturer of your computer or a computer

dealer.

System requirements

Your computer must meet the following system requirements to use the supplied Application Software.

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

Macintosh

Operating System

Mac OS 9.0.4 or greater (USB Driver 1.4 or greater)

Computer

Macintosh computer with a USB port as a standard

equipment

Macintosh is a trademark of Apple Computer, Inc., registered in

the U.S. and other countries.

E-10

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

Installing the software

Microsoft Windows 98/98SE or Windows Me

m Installing and checking the USB driver

1

Turn on your computer and, if it’s not running

already, start Windows 98/98SE or Windows Me.

2

Plug the AC power cord of this unit into the AC

outlet.

This unit can be on or in standby mode when installing the

driver.

3

Connect this unit to a USB port on the computer

using the supplied USB cable.

Windows automatically detects this unit and installs the

necessary driver software. Make operations as indicated in

the dialog box. You may be requested to insert your

Windows OS CD-ROM.

* The installation may take a longer time depending on

the system environment. After the installation dialog

box disappears, wait several minutes.

Check that the USB driver has been installed successfully

by following the procedure below.

4

Click the Windows “Start” button and select

“Settings”, and then “Control Panel”.

The Control Panel window appears.

5

Double-click the “System” icon.

The System Properties window appears.

6

Click the “Device Manager” tab.

The Device Manager window appears.

7

Click the “View devices by type” option button.

8

Click the “+” symbol next to “Sound, video and

game controllers,” and make sure that “USB Audio

Device” appears in the list, as shown.

* The screen image is for Windows 98SE.

* When using Windows Me, “?” may be shown at the

head of “USB Copmposite Device” in green. This

means the USB driver has been installed with the

Generic ID supplied with the operating system. (This is

not an error message.)

9

Click the “+” symbol next to “Human Interface

Devices”, and make sure that “HID-compliant

consumer control device” and “USB Human

Interface Device” appear in the list, as shown.

* The screen image is for Windows 98SE.

10

Click the “+” symbol next to “Universal Serial

Bus controllers” and make sure that “USB

Composite Device” appears in the list, as

shown.

* The screen image is for Windows 98SE.

Notes

● The device list on your computer may differ to that shown

here.

● If “!” or “?” is shown at the head of the device name, check

the followings:

* The USB cable is firmly connected.

* The AC power cord of this unit is plugged into an AC

outlet.

● If the driver has not been successfully installed, disconnect

the USB cable and connect it again. Then try to install the

driver again. If installation still fails, restart Windows and try

again.

E-11

English

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

INSTALLING USB DRIVER AND

APPLICATION SOFTWARE

Make the following settings on your computer after the installation of the driver is finished.

Setting of Audio and Audio CD

[Windows 98/98SE only]

* Terminate all the activated applications.

* When using Windows 98SE, restart Windows, first.

1

Click the Windows “Start” button and select

“Settings”, and then “Control Panel”.

2

Double-click the “Multimedia” icon.

3

Click the “Audio” tab and select “USB Audio

Device” at “Preferred device” of “Playback”.

* Usually, this setting is automatically made.

* If “USB Audio Device” does not appear, restart

Windows.

4

Click the “CD Music” tab and select the CD-ROM

drive for playing audio CDs.

5

Click the check box of “Enable digital CD audio for

this CD-ROM device” to enter the check mark.

* It may happen that the check box cannot be clicked

because some CD-ROM drives cannot be used for

playing audio CDs.

6

Click “OK” and close the “Multimedia” setting

panel.

7

Restart Windows.

Note

When using two or more drives, you must make the above setting

for each drive.

Checking the Audio setting

[Windows Me only]

1

Click the Windows Me “Start” button and select

“Settings”, and then “Control Panel”.

2

Double-click the “Sounds and Multimedia” icon.

3

Click the “Audio” tab and select “USB Audio

Device” at “Preferred device” of “Sound

Playback”.

* Usually, this setting is automatically made.

* If “USB Audio Device” does not appear, restart

Windows.

Checking sound output and adjusting volume

[Windows 98/98SE and Windows Me]

1

Make the following operations on the front panel of

this unit.

a)Press the power switch to turn on this unit.

(Some messages are shown on the display.)

b)Press the USB input selector key.

c)Use the volume control to adjust the volume.

(Set the control to about “30”.)

2

Adjust the volume on the computer as follows.

a)Double-click the speaker icon on the task tray,

or select “Start”, “Programs”, “Accessories”,

“Entertainment” in this order and click “Volume

Control”.

(The volume adjustment window appears.)

b)Adjust the volume by dragging the “Volume”

slider. Set the slider between the center and

max. positions.

* Do not enter the check mark in the “Mute” check

box. If entered, sound output will stop.

3

Click the Windows “Start” button and select

“Settings”, and then “Control Panel”.

4

Double-click the “Sounds” (or “Sounds and

Multimedia”) icon.

5

Click the “Sounds” tab.

6

Check that the sound is output normally by

outputting “Default sound”, etc. from “Events” (or

“Sound Events”).

* If no sound is heard, restart Windows and check again.

DSP MUTE

VOL

VIRTUAL

5.I

CH

DIGITAL

PROLOGIC FMAM ST

USB PCM D.

DSP

USB

PC

AUX1

AUX2

USB

Display

Volume control

Power switch

E-12

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

Next, install the Application Software and Online Help

from the supplied CD-ROM.

m Installing the Application Software

* Terminate all the activated applications (including virus

checkers) on the computer first.

1

Insert the CD-ROM into the CD-ROM or DVD-ROM

drive.

If the Windows Autorun feature is turned on, the

installation start-up screen appears automatically.

2

Continue with the installation as prompted.

If the Windows Autorun feature is not turned on

Display the contents of the CD-ROM by using “My

Computer” etc., and double-click on “Readme.txt.”. The

installation method is described in this file.

m Using the Application Software and

Online Help

This section explains how to start the Application Software

and view the online help.

1

Click the Windows “Start” button and select

“Programs”, “YAMAHA AP-U70 (or DP-U50)”, “AP-

U70 (or DP-U50)” in this order.

The Application Software starts.

2

To view the online help, click the Windows “Start”

button and select “Programs”, “YAMAHA AP-U70

(or DP-U50)”, “Help” in this order.

The online help, which explains how to use the Application

Software, starts.

Note

Never disconnect the USB cable while starting up the

Application Software. If disconnected, the computer may hang.

m Uninstalling the Application Software

This section explains how to uninstall the Application

Software.

1

Terminate the Application Software and online

help.

2

Click the Windows “Start” button and select

“Settings”, and then “Control Panel”.

The Control Panel window appears.

3

Double-click the “Add/Remove Programs” icon.

The “Add/Remove Programs Properties” window appears.

4

Select “YAMAHA AP-U70 (or DP-U50) Application”

in the software list.

“YAMAHA AP-U70 (or DP-U50) Application” is

highlighted.

5

Click the “Add/Remove Programs” button and

continue as prompted.

E-13

English

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

INSTALLING USB DRIVER AND

APPLICATION SOFTWARE

Microsoft Windows 2000 Professional

m Installing and checking the USB driver

1

Turn on your computer and, if it’s not running

already, start Windows 2000 Professional, and log

in with Administrator.

2

Plug the AC power cord of this unit into the AC

outlet.

This unit can be on or in the standby mode when installing

the driver.

3

Connect this unit to a USB port on the computer

using the supplied USB cable.

Windows automatically detects this unit and installs the

necessary driver software.

* The installation may take a longer time depending on

the system environment. After the dialog box for

installation disappears, wait several minutes.

Check that the USB driver has been installed successfully

by following the procedure below.

4

Click the Windows “Start” button and select

“Settings”, and then “Control Panel”.

The Control Panel window appears.

5

Double-click the “System” icon.

The System Properties window appears.

6

Select the “Hardware” tab, and click the “Device

Manager”.

The Device Manager window appears.

7

Select the “View” tab, and click the “Devices by

type” option button.

8

Click the “+” symbol next to “Sound, video and

game controllers,” and make sure that “USB Audio

Device” appears in the list, as shown.

9

Click the “+” symbol next to “Human Interface

Devices”, and make sure that “HID-compliant

consumer control device” and “USB Human

Interface Device” appear in the list, as shown.

10

Click the “+” symbol next to “Universal Serial

Bus controllers” and make sure that “USB

Composite Device” appears in the list, as

shown.

Notes

● The device list on your computer may differ to that shown

here.

● If “!” or “?” is shown at the head of the device name, check

the followings:

* The USB cable is firmly connected.

* The AC power cord of this unit is plugged into an AC

outlet.

● If the driver has not been successfully installed, disconnect

the USB cable and connect it again. Then try to install the

driver again. If installation still fails, restart Windows and try

again.

E-14

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

Make the following settings on your computer after the installation of the driver is finished.

Setting of Audio and Audio CD

1

Click the Windows “Start” button and select

“Settings”, and then “Control Panel”.

2

Double-click the “Sounds and Multimedia” icon.

3

Click the “Audio” tab and select “USB Audio

Device” at “Preferred device” of “Sound

Playback”.

* Usually, this setting is automatically made.

4

Click the “Hardware” tab and double-click the item

of the DVD or CD-ROM to be used in the “Devices”.

5

Click the “Properties” tab, and click the check box

of “Enable digital CD audio for this CD-ROM

device” to enter the check mark.

* It may happen that the check box cannot be clicked

because some CD-ROM drives cannot be used for

playing audio CDs.

6

Restart Windows, and log in with Administrator.

Note

When using two or more drives, you must make the above setting

for each drive.

Checking sound output and adjusting volume

1

Make the following operations on the front panel of

this unit.

a)Press the power switch to turn on this unit.

(Some messages are shown on the display.)

b)Press the USB input selector key.

c) Use the volume control to adjust the volume.

(Set the control to about “30”.)

2

Adjust the volume on the computer as follows.

a) Double-click the speaker icon on the task tray,

or select “Start”, “Programs”, “Accessories”,

“Entertainment” in this order and click “Volume

Control”.

(The volume adjustment window appears.)

b)Adjust the volume by dragging the “Volume”

slider. Set the slider between the center and

max. position.

* Do not enter the check mark in the “Mute” check

box. If entered, sound output will stop.

3

Click the Windows “Start” button and select

“Settings”, and then “Control Panel”.

4

Double-click the “Sounds and Multimedia” icon.

5

Click the “Sounds” tab.

6

Check that the sound is output normally by

outputting “Default Beep”, etc. from “Sound

Events”.

* If no sound is heard, restart Windows and check again.

DSP MUTE

VOL

VIRTUAL

5.I

CH

DIGITAL

PROLOGIC FMAM ST

USB PCM D.

DSP

USB

PC

AUX1

AUX2

USB

Display

Volume control

Power switch

E-15

English

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

INSTALLING USB DRIVER AND

APPLICATION SOFTWARE

Next, install the Application Software and Online Help

from the supplied CD-ROM.

m Installing the Application Software

1

Insert the CD-ROM into the CD-ROM or DVD-ROM

drive.

If the Windows Autorun feature is turned on, the

installation start-up screen appears automatically.

2

Continue with the installation as prompted.

If the Windows Autorun feature is not turned on

Display the contents of the CD-ROM by using “My

Computer” etc., and double-click on “Readme.txt.”. The

installation method is described in this file.

m Using the Application Software and

Online Help

This section explains how to start the Application Software

and view the online help.

1

Click the Windows “Start” button and select

“Programs”, “YAMAHA AP-U70 (or DP-U50)”, “AP-

U70 (or DP-U50)” in this order.

The Application Software starts.

2

To view the online help, click the Windows “Start”

button and select “Programs”, “YAMAHA AP-U70

(or DP-U50)”, “Help” in this order.

The online help, which explains how to use the Application

Software, starts.

Note

Never disconnect the USB cable while starting up the

Application Software. If disconnected, the computer may hang.

m Uninstalling the Application Software

This section explains how to uninstall the Application

Software.

1

Terminate the Application Software and online

help.

2

Click the Windows “Start” button and select

“Settings”, and then “Control Panel”.

The Control Panel window appears.

3

Double-click the “Add/Remove Programs” icon.

The “Add/Remove Programs” window appears.

4

Select “YAMAHA AP-U70 (or DP-U50) Application”

in the software list.

“YAMAHA AP-U70 (or DP-U50) Application” is

highlighted.

5

Click the “Change/Remove” button and continue

as prompted.

E-16

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

Macintosh computer

m Connections and setup

1

Plug the AC power cord of this unit into the AC

outlet.

2

Start the Macintosh.

3

Connect this unit to a USB port on the computer

using the supplied USB cable.

The driver software for USB audio is automatically

installed.

4

Press the power switch of this unit to turn on this

unit.

Some messages are shown on the display.

Checking sound output and adjusting volume

1

Make the following operations on the front panel of

this unit.

a)Press the USB input selector key.

b)Use the volume control to adjust the volume.

(Set the control to about “30”.)

2

Check that the sound is output normally by

outputting “Alert Sounds”, etc. from “Sound” on

the “Control Panels” on the Macintosh.

3

Adjust the volume by dragging the “Sound” tab on

the “Control Panels”. Set the tab between the

center and max. position.

Notes

● The sound output destination cannot be changed from

“Choose a device for sound output” on the “Control Panels”.

When using the internal speaker of the Macintosh as the

sound output destination, disconnect the USB cable

connecting this unit and the Macintosh.

● When using headphones with this unit connected to the USB

port on the Macintosh, use the headphone jack on this unit,

not the jack on the Macintosh.

● Since the Macintosh issues a start-up sound at power-on

before the sound signal via the USB connection is activated,

the start-up sound cannot be issued via the USB connection.

To play the start-up sound via this unit, you need a separate

analog connection between this unit and the Macintosh.

(When USB MIX is set to “ON” from the Setup Panel of the

Application Software, you can mix the start-up sound via the

analog connection with the same sound via the USB

connection without making any change in the input selector

settings.)

DSP MUTE

VOL

VIRTUAL

5.I

CH

DIGITAL

PROLOGIC FMAM ST

USB PCM D.

DSP

USB

PC

AUX1

AUX2

USB

Display

Volume control

Power switch

E-17

English

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

INSTALLING USB DRIVER AND

APPLICATION SOFTWARE

Next, install the Application Software and Online Help

from the supplied CD-ROM.

m Installing the Application Software

1

Insert the CD-ROM into the CD-ROM or DVD-ROM

drive.

The CD-ROM includes the simple installer “AP-U70 (or

DP-U50) Installer” and the installation data folder.

2

Double-click the simple installer “AP-U70 (or DP-

U50) Installer” to start it.

The Application Software and Online Help are installed on

the hard disk.

* Files installed by the simple installer

The simple installer “AP-U70 (or DP-U50) Installer”

copies the “AP-U70 (or DP-U50) Application” folder in

the installation data folder to a specified location. It

additionally copies the “AP-U70 (or DP-U50) Help”

folder into the “Help” folder in the “System Folder” on the

startup disk.

* To install the Application Software without using the

simple installer, follow the instructions below.

Installing the Application Software without using

the simple installer “AP-U70 (or DP-U50)

Installer”:

1

Copy the “AP-U70 (or DP-U50) Application” folder

in the installation data folder to any hard disk.

2

Copy the “AP-U70 (or DP-U50) Help” folder in the

installation data folder to the “Help” folder in the

“System Folder” on the startup disk.

You can refer to this Online Help file with Mac Help.

m How to use the Application Software and

Online Help

All operating instructions for the Application Software is

available from the Online Help. To refer to the instructions,

select the Online Help from the menu displayed upon

activation of the Application Software.

Relationship between operation on this unit and the

Application Software

When an operation button or the volume control on this unit

is operated with the Application Software activated, the

display screen of the Application Software automatically

changes to reflect the changes made on the unit. When

this unit is operated as above while the display shows the

screens of the Application Software data and another

program, the display of the other program (for example, the

playback display of QuickTime) may be partially disturbed

as the screen of the Application Software responds to the

operation on this unit. To avoid this, operate this unit

without activating the Application Software.

E-18

APPENDIX

Problem

The unit cannot be turned on

though the power switch on the

front panel or the POWER key on

the remote control is pressed.

No sound.

Application does not start.

The driver software cannot be

installed successfully.

Using this unit affects TV

reception or the performance of

other equipment.

Cause

The power cord is not plugged in or is not

completely inserted.

This unit is in the standby mode.

Incorrect output cord connections.

This unit and the computer is not connected

with the USB cable.

The power cord is not plugged in or is not

completely inserted.

The USB cable is not firmly connected between

this unit and the computer.

The power cord is not plugged in or is not

completely inserted.

The equipment may be too close to this unit.

Remedy

Firmly plug in the power cord.

Turn on this unit by pressing the Power switch on the

front panel or the POWER key on the remote control.

Connect the cords properly. If the problem

persists, the cords may be defective.

Connect this unit and the computer with the USB

cable.

Firmly plug in the power cord.

Disconnect the USB cable, and then connect it

firmly again.

Firmly plug in the power cord.

Move the equipment away from this unit.

Troubleshooting

Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or if the

instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service

center.

APPENDIX

Depending on some computer hardware or operating systems, all functions of this unit cannot be used. You can refer to the

following Yamaha website for details and related information.

http://www.yamaha.co.jp/audio/

Sayfa yükleniyor ...

Yamaha DP-U50 El kitabı

Bu kılavuz için de uygundur

Yamaha DP-U50 El kitabı

Diğer dillerde

İlgili Makaleler