4948
Description of the appliance
Programme Option buttons
Depending on the programme, different functions can be combined.
These must be selected after choosing the desired programme and
before depressing the START/PAUSE button.
When these buttons are pressed, the corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
SPIN SPEED (SIKMA)
Press this button to reduce the maximum speed of the final speed
proposed by the machine for the selected programme or to select
the ANTI-CREASE option (SUDA BEKLETME).
The maximum spin speed for cotton is 1200 rpm, for synthet-
ics and wool 900 rpm and for delicates 700 rpm.
ANTI-CREASE (SUDA BEKLETME)
By selecting this option, the last rinse water is not emptied out, to
prevent the fabrics from creasing. When the programme has finished,
the pilot light SUDA BEKLETME on the programme progress display illu-
minates and the light of the START/PAUSE button flashes to indicate that
the water must be emptied out.
To empty out water:
• press the START/PAUSE button: after emptying, the machine performs
the spin cycle required for the type of wash selected;
• select the DRAIN programme “D” to empty out the water without
spinning.
Warning! The programme selector dial must be turned first to RESET X
and then to the DRAIN programme “D”.
If the water is not emptied out, the machine automatically empties
itself after 18 hours.
PREWASH (ÖN YIKAMA)
The machine performs a prewash cycle at 30°C max. The prewash cycle
ends with a short spin in programmes for Cotton and Synthetics, and
with emptying of the water without spinning for Delicates.
This option is not available with the wool programme and special pro-
grammes.
For use when washing heavily soiled laundry.
Description of the appliance
Mains-on light (Açık)
This light comes on when the ON/OFF button is pressed, and goes out
when it is pressed again.
START/PAUSE button (Baçlatma/Bekletme)
This button has three functions:
a) Start
After having selected the required programme, press this button to start
the machine; the corresponding pilot light stops flashing.
If you have selected the DELAY START option (Progr. geciktirme), the
machine starts its hourly countdown.
b) Pause
To interrupt a programme which is running, press the START/PAUSE
button: the light of the START/PAUSE button starts to flash.
To restart the programme from the point at which it was interrupted,
press the START/PAUSE button again.
c) Empty out water
At the end of a programme which ends with water in the drum (ANTI-
CREASE - SUDA BEKLETME option), or after the SOAK programme
(Sadece Ön yıkama) “A” press the START/PAUSE button to empty out the
water: after the SOAK programme “A” the machine will empty only;
after the programmes with ANTI-CREASE option the machine will emp-
ty and spin.
DELAY START button (PROGR. GECIKTIRME)
The wash programme can be delayed from 2 hours up to a maximum of
8 hours.
The button must be pressed after selecting the programme and
before pressing the START/PAUSE button.
Depress the button until the light corresponding to the selected delay
comes on.
After depressing the START/PAUSE button, the machine starts its hourly
countdown.
To alter or cancel the preset delay, press the START/PAUSE button, then
press the DELAY START button until the light corresponding to the
selected delay comes on, or, if you wish to cancel the delay, depress the
button until the corresponding light goes out.
Then press the START/PAUSE button again.