y When cleaning the product and its components, unplug the
power first and wipe it with a soft cloth. Applying excessive
force may cause scratches or discolouration. Do not spray
with water or wipe with a wet cloth. Never use glass cleaner,
car or industrial shiner, abrasives or wax, benzene, alcohol
etc., which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product
damage (deformation, corrosion or breakage).
y As long as this unit is connected to the AC wall outlet, it is not disconnected
from the AC power source even if you turn off this unit by SWITCH.
y When unplugging the cable, grab the plug and unplug it, by
pulling at the plug. Don’t pull at the cord to unplug the power
cord from the power board, as this could be hazardous.
y When moving the product, make sure you turn the power off
first. Then, unplug the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be damaged, which may cre-
ate a fire hazard or cause electric shock.
y When moving or unpacking the product, work in pairs be-
cause the product is heavy.
Otherwise, this may result in injury.
y Contact the service centre once a year to clean the internal
parts of the product.
Accumulated dust can cause mechanical failure.
y Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the ap-
paratus has been exposed to rain or moisture, does not oper-
ate normally, or has been dropped.
y If the product feels cold to the touch, there may be a small
“flicker” when it is turned on. This is normal, there is nothing
wrong with product.
y The panel is a high technology display product with resolution
of two million to six million pixels. You may see tiny black dots
and/or brightly coloured dots (White, Red, Green, Blue) at a
size of 1 ppm on the panel. This does not indicate a malfunc-
tion and does not affect the performance and reliability of the
product.
This phenomenon also occurs in third-party products and is
not subject to exchange or refund.
10
SAFETY INSTRUCTIONS