Yamaha DM1000V Kullanım kılavuzu

Yamaha
Marka
Yamaha
Model
DM1000V
Tip
Kullanım kılavuzu

Bu kılavuz için de uygundur

DM1000 V2.2 Supplementary Manual
The DM1000 System Software Version 2.20 features the following changes and additions (including the changes made
up to Version 2.05).
Changes and additions in Version 2.20
❏
More Add-On Effects Packages available (pages 161 and 180)
The following Add-On Effects Packages are now available:
•
AE041
Surround Post Package
•
AE051
Vintage Stomp Package
Due to this addition, effect memories #53 through 67 in the Effects library are now designated as preset effects pro-
grams. These preset programs are dedicated to Add-On Effects. The numbers of effects programs that do not have
Add-On Effects installed are grayed out and cannot be used. The following effects programs in the Effects library
have been dedicated to the new Add-On Effects Packages.
Please refer to the following Yamaha website for the latest information on the Add-On Effects Packages:
http://www.yamahaproaudio.com
❏
Additional trigger sources in the GPI OUTPUT section (pages 279 and 305)
The following parameters have been added as the trigger signal source in the GPI OUTPUT section.
xxx ON TALLY:
The trigger signal is active only while the corresponding channel is turned ON.
The following parameters have been added in the OUTPUT list of the “GPI Trigger Source & Target List” on
page 305.
❏
About the DM1000 Editor version
If you use the DM1000 Editor (Studio Manager) to control the DM1000, update the DM1000 Editor to version
2.1.2 or higher (Studio Manager version 2.1 or higher).
If your Studio Manager CD-ROM version is not X5834
B0
, download the latest version from the following Yamaha
website:
http://www.yamahaproaudio.com
No. Preset name Type
62 Room ER ROOM ER
63 Auto Doppler AUTO DOPPLER
64 Field Rotation FLD ROTATION
65 Max100 MAX100
66 Vintage Phaser VNTG PHASER
67 Dual Phaser DUAL PHASER
# Source
222 CH1 ON TALLY
:
269 CH48 ON TALLY
270 BUS1 ON TALLY
:
277 BUS8 ON TALLY
278 AUX1 ON TALLY
:
285 AUX8 ON TALLY
286 ST ON TALLY
EN
DM1000V2.2_E Page 1 Wednesday
,
June 9, 2010 12:06 PM
U.R.G., Pro Audio Division
© 2005 Yamaha Corporation
007IPTO-B0
Printed in Japan
WW25300
Changes in Version 2.05
❏
The motor faders' response to the ESAM FROM command has been changed
(pages 260 through 264)
The motor faders now respond differently to the ESAM FROM command that the DM1000 receives from the video
editor. Also, additional types of video editors have been verified as compatible with the DM1000.
When any channels other than those connected to FROM machines receive the FROM command from the video
editor, the fader levels are now automatically adjusted to –
∞
dB. You also have the option of not assigning any REC
machines in the ESAM Machine Assign page. Therefore, please note the following changes.
Selecting a REC machine (Step 8 on page 261)
• On a channel assigned to a REC machine, fader control via the FROM/TO commands is disabled.
•When using pre-read (page 263), do not select a REC machine.
Setting the fader’s initial and target values of the crossfade (Step 13 on page 263)
•The ESAM command will select the FROM machine channels, but not set the initial value of the crossfade.
•The ESAM command will select the TO machine channels, but not set the target value of the crossfade.
•The initial value of the FROM machine channel level and the target value of the TO machine channel level will
use the values you set most recently by operating the faders manually, or the value of the most recently recalled
scene.
•To store these values in a scene memory, set the fader level of the FROM machine channel as the initial value,
and set the fader level of the TO Machine channel as the target value, then store them.
Video editors with confirmed compatibility (page 264)
As of April, 2005, the following types of video editors have been proved that they correctly work with the DM1000.
•Sony BVE700, BVE2000, BVE9100, PVE500, BZS8050
•Accom Axial 2010, 2020, 3000, AxialMX
•Ampex ACE200
•Panasonic AG A850
Please refer to the following Yamaha website for the latest information:
http://www.yamahaproaudio.com
Changes in V2.01
❏
Y96K card and MY16-mLAN card support (pages 55 and 339)
The Waves Y96K Plug-in DSP card (supported by Version 2.00) and the MY16-mLAN interface card are now sup-
ported. Also, in accordance with the mLAN MIDI specifications, multiple MIDI ports on SLOT 1 have been
changed to a single port. (Now you do not need to select Ports 1-8.)
Please refer to the following website for the latest information on compatible cards, and on the number of cards
that can be installed in combination with other cards.
http://www.yamahaproaudio.com
DM1000V2.2_E Page 2 Wednesday
,
June 9, 2010 12:06 PM
  • Page 1 1
  • Page 2 2

Yamaha DM1000V Kullanım kılavuzu

Yamaha
Marka
Yamaha
Model
DM1000V
Tip
Kullanım kılavuzu
Bu kılavuz için de uygundur
PDF İndir
rapor

Diğer dillerde

İlgili Makaleler