BRIGGS STRATTON 090000 Performance Of Petrol Engines Kullanım kılavuzu

Marka: BRIGGS STRATTON

Model: 090000 Performance Of Petrol Engines

Kategori: Motor

Tip: Kullanım kılavuzu

Operator's Manual

Инструкции за експлоатация

Návod k obsluze

Kasutusjuhend

Priruènik za operatora

Kezelési útmutató

Naudojimo instrukcija

Operatora rokasgrāmata

Instrukcja obsługi

Manual de utilizare

Руководство по эксплуатации

Návod na obsluhu

Priroènik za uporabo

Kullanma Kilavuz

090000, 093J00, 100000

Revision A

Not for

Reproduction

Not for

Reproduction

Not for

Reproduction

Not for

Reproduction

General Information

This manual contains safety information so that you will know the hazards and risks

related to this engine and how to prevent them. It also contains instructions for the

correct use and maintenance of the engine. Because Briggs & Stratton does not know

what equipment this engine will power, it is important that you read, understand, and

obey these instructions. Save these original instructions for future reference.

NOTE:The figures and illustrations in this manual are for reference only and can be

different from your model. If you need help, contact an Authorized Service Dealer.

For replacement parts or technical help, record the date of purchase, engine model,

type, trim, and the engine serial number. These numbers are located on your engine.

Refer to the Features and Controls section.

Date of Purchase

Engine Model - Type - Trim

Engine Serial Number

European Office Contact Information

For questions related to European emissions, contact our European office at:

Max-Born-Straße 2, 68519 Viernheim, Germany.

European Union (EU) Stage V (5): Carbon

Dioxide (CO2) Values

Enter CO2 in the search window on BriggsandStratton.com to find carbon dioxide values

of Briggs & Stratton EU Type-Approval Certificate engines.

Recycling Information

Recycle all cartons, boxes, used oil, and batteries as

specified by government regulations.

Operator Safety

Safety Alert Symbol and Signal Words

The safety alert symbol identifies safety information about

hazards that could result in personal injury. A signal word (DANGER, WARNING,

or CAUTION) is used to indicate the likelihood and the potential severity of injury. In

addition, a hazard symbol is used to represent the type of hazard.

DANGER indicates a hazard which, if not avoided, will result in death or serious injury.

WARNING indicates a hazard which, if not avoided, could result in death or serious

injury.

CAUTION indicates a hazard which, if not avoided, could result in minor or moderate

injury.

NOTICE indicates information considered important but not hazard-related.

Hazard Symbols and Meanings

Safety information about

hazards that can result in

personal injury.

Read and understand the

Operator's Manual before

operating or servicing the

unit.

Fire Hazard Explosion Hazard

Shock Hazard Toxic Fume Hazard

Hot Surface Hazard Noise Hazard - Ear

protection recommended

for extended use.

Thrown Object Hazard -

Wear eye protection.

Explosion Hazard

Frostbite Hazard Kickback Hazard

Amputation Hazard -

Moving Parts

Chemical Hazard

Thermal Heat Hazard Corrosive Hazard

Safety Messages

WARNING

Briggs & Stratton® Engines are not designed for and are not to be used to power:

fun-karts; go-karts; children's, recreational, or sport all-terrain vehicles (ATVs);

motorbikes; hovercraft; aircraft products; or vehicles used in competitive events not

sanctioned by Briggs & Stratton. For information about competitive racing products, see

www.briggsracing.com. For use with utility and side-by-side ATVs, please contact Briggs

& Stratton Power Application Center, 1-866-927-3349. Incorrect engine use could result

in serious injury or death.

WARNING

Fuel and its vapors are flammable and explosive. Fire or explosion could result in

burns or death.

When you add fuel

• Stop the engine. Before you remove the fuel cap, wait a minimum of two (2)

minutes to make sure that the engine is cool.

• Fill the fuel tank outdoors or in an area that has good airflow.

• Do not put too much fuel in the tank. For expansion of the fuel, do not fill above

the bottom of the fuel tank neck.

• Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition

sources.

• Frequently examine the fuel lines, fuel tank, fuel cap, and connections for cracks

or leaks. Replace damaged parts.

• If fuel spills, wait until it dries before you start the engine.

When you start the engine

• Make sure that the spark plug, muffler, fuel cap and air cleaner (if equipped) are

correctly installed.

• Do not crank the engine with the spark plug removed.

• If the engine is flooded, set the choke (if equipped) to the OPEN or RUN

position. Move the throttle (if equipped) to the FAST position and crank until the

engine starts.

• If there is natural or LP gas leakage in the area, do not start the engine.

• Because vapors are flammable, do not use pressurized starter fluids.

When you operate the equipment

• Do not tilt the engine or the equipment at an angle which causes fuel to spill.

• Do not choke the carburetor (if equipped) to stop the engine.

• Do not start or operate the engine with the air cleaner (if equipped) or the air

filter (if equipped) removed.

When you do maintenance

• If you drain the oil from the top oil fill tube, the fuel tank must be empty. If it is not

empty, fuel leakage can occurand could result a fire or an explosion.

• During maintenance if it is necessary to tilt the unit, make sure that the fuel tank,

if mounted on the engine, is empty and that the spark plug side is up. If the fuel

tank is not empty, leakage can occurand could result a fire or an explosion.

• Frequently examine the fuel lines, fuel tank, fuel cap, and connections for cracks

or leaks. Replace damaged parts.

• Do not change the governor spring, links or other parts to increase engine

speed.

• Do not hit the flywheel with a hammer or hard object. This could result in failure

of the flywheel during operation.

• Replacement parts must be of the same design and installed in the same

position as the original parts. Other parts could result in damage or an injury.

Not for

Reproduction

When you move the location of equipment

• Make sure that the fuel tank is EMPTY or that the fuel shut-off valve is in the

CLOSED position.

When fuel or equipment is in storage with fuel in the fuel tank

• Because pilot lights or other ignition sources can cause explosions, keep fuel or

equipment away from furnaces, stoves, water heaters or other appliances that

have pilot lights.

WARNING

Fuel and its vapors are flammable and explosive. Fire or explosion could result in

burns or death.

Engine start-up causes spark that could result in a fire or explosion.

• If there is natural or LP gas leakage in the area, do not start the engine.

• Because vapors are flammable, do not use pressurized starter fluids.

WARNING

POISONOUS GAS HAZARD. Engine exhaust contains carbon monoxide, a

poisonous gas that could kill you in minutes. Although you do not smell exhaust

fumes, you could still be exposed to dangerous carbon monoxide gas. If you feel

sick, dizzy, or weak while you use this product, get to fresh air RIGHT AWAY. See

a doctor. You may have carbon monoxide poisoning.

• Carbon monoxide gas can collect in occupied spaces. To reduce the risk of

carbon monoxide gas, ONLY operate this product outdoors and far away from

windows, doors and vents.

• Install battery-operated carbon monoxide alarms or plug-in carbon monoxide

alarms with battery back-up as specified by the manufacturer's instructions.

Smoke alarms cannot sense carbon monoxide gas.

• DO NOT operate this product in homes, garages, basements, crawlspaces,

sheds, or other closed spaces, even if you use fans or open doors and windows

for ventilation. After the operation of this product, carbon monoxide can quickly

collect in these spaces and stay for hours.

• ALWAYS put this product downwind and point the engine exhaust away from

occupied spaces.

WARNING

Rotating parts can entangle hands, feet, hair, clothing, or accessories and result

in traumatic amputation or laceration.

• Operate equipment with the guards correctly installed.

• Keep hands and feet away from rotating parts.

• Remove jewelry and make sure that long hair is away from all rotating parts.

• Do not wear loose clothes or items that could become caught.

WARNING

During operation, the engine and muffler become hot. If you touch a hot engine,

thermal burns can occur.

Combustible materials, such as leaves, grass and brush, can catch fire.

• Before you touch the engine or muffler, stop the engine and wait two (2)

minutes. Make sure that the engine and muffler are safe to touch.

• Remove debris from the muffler and engine.

It is a violation of California Public Resource Code, Section 4442, to use or operate the

engine on any forest-covered, brush-covered, or grass-covered land unless the exhaust

system is equipped with a spark arrester, as defined in section 4442, maintained in

effective working order. Other states or federal jurisdictions may have similar laws;

reference Federal Regulation 36 CFR Part 261.52. Contact the original equipment

manufacturer, retailer, or dealer to obtain a spark arrester designed for the exhaust

system installed on this engine.

WARNING

Accidental engine spark can cause an electric shock or fire and could result in

entanglement, traumatic amputation or laceration.

Before you make adjustments or repairs:

• Disconnect the spark plug wire and keep it away from the spark plugs.

• Disconnect the battery wire from the negative battery terminal (only engines with

electric start).

• Use only the correct tools.

When you check for spark:

• Use an approved spark plug tester.

• Do not check for spark with the spark plug removed.

WARNING

Fuel vapors are flammable and explosive. Fire or explosion could result in burns

or death.

If you smell gas

• Do not start the engine.

• Do not switch on electrical switches.

• Do not use a phone in the vicinity.

• Evacuate the area.

• Contact the gas supplier or the fire department.

WARNING

Incorrect use of the battery and charger could result in an electrical shock or fire.

Operation

• Keep the battery charger dry. Do not let the battery pack get wet.

• To decrease the risk of electrical shock, do not let water flow into the AC plug.

• Do not put an object into the battery contacts. This will short-circuit the battery.

When you charge the battery pack

• Only use Briggs & Stratton battery chargers.

• Do not use the Briggs & Stratton battery charger on other types of batteries.

• Keep the battery charger dry. Do not let the battery pack get wet.

• To decrease the risk of damage to the electric plug and cord, pull the plug, not

the cord, when you disconnect the charger.

• If the charger has a damaged plug or cord, do not use it. The supply cord cannot

be replaced. A damaged charger must be replaced immediately.

• If the charger is damaged do not use it. The charger is not serviceable and must

be replaced.

• Do not disassemble or try to repair the charger.

• To prevent electric shock, disconnect the charger from the outlet before you

clean it.

• Do not put an object into the battery contacts. This will short-circuit the battery.

• All persons or children with decreased abilities (physical, sensory, mental) must

not use the charger unless looked after by an adult.

Extension cord

• Use of an incorrect extension cord could result in an electric shock or fire. If you

use an extension cord, make sure that:

1. The pins on the plug of the extension cord are the same number, size, and shape

as those of the plug on the charger;

2. The extension cord is correctly connected and in good electrical condition; and

3. For the correct AC ampere rating of the charger, make sure that the wire size is a

minimum of 16 AWG.

When you keep the battery pack in storage

• Keep the battery charger dry. Do not let the battery pack get wet.

Before you make adjustments or repairs

•Models with portable battery pack: Remove the battery pack from the battery

tray.

•Models with integrated battery pack: Disconnect the wire harness from the

starter motor.

WARNING

Battery chemicals are poisonous and can cause corrosion.

Fire or explosion could result in burns or death.

Electrical Shock

• Do not burn used battery packs. Explosions, poisonous fumes and dangerous

materials can occur.

• Do not use a damaged battery.

Features and Controls

Engine Controls

Compare the callout letters in Figures 1, 2, and 3 to the engine controls in the list that

follows:

A. Engine Identification Numbers Model - Type - Code

B. Spark Plug

C. Muffler, Muffler Guard (optional), Spark Arrester (if equipped)

D. Electric Starter

E. Dipstick

F. Lithium-Ion Portable Battery Pack

G. Air Intake Grille

Not for

Reproduction

H. Fuel Tank and Cap

I. Air Cleaner

J. Throttle Control (if equipped)

K. Battery Charger - Portable Battery Pack

L. Fuel Shut-off (if equipped)

M. Lithium-Ion Integrated Battery Pack

N. Cable and Charger - Integrated Battery Pack

Engine Control Symbols and Meanings

Engine Speed - FAST Engine Speed - SLOW

Engine Speed - STOP ON - OFF

Engine Start

Choke CLOSED

Engine Start

Choke OPEN

Fuel Cap

Fuel Shut-off OPEN

Fuel Shut-off CLOSED

Fuel Level - Maximum

Do Not Overfill

Battery Control Symbols and Meanings

Volt Ampere

Double Insulated Alternating Current

Direct Current Underwriters Laboratories,

Inc. US & Canada Listed

Product

Underwriters Laboratories,

Inc. Registered Product

Hertz

Correctly Recycle Battery Charge Battery Pack

Remove Key / Battery Pack

Operation

Oil Recommendations

Oil Capacity: See the Specifications section.

NOTICE

This engine was shipped from Briggs & Stratton without oil. Equipment manufacturers or

dealers could have added oil to the engine. Before you start the engine for the first time,

make sure that the oil is at the correct level. Add oil as specified by the instructions in

this manual. If you start the engine without oil, damage will occur and the engine will not

be repaired under warranty.

We recommend the use of Briggs & Stratton® Warranty Certified oils for best

performance. Other high-quality detergent oils are permitted if classified for service SF,

SG, SH, SJ or higher. Do not use special additives.

Use the chart to select the best viscosity for the outdoor temperature range expected.

Engines on most outdoor power equipment operate well with 5W-30 Synthetic oil. For

equipment operated in hot temperatures, Vanguard® 15W-50 Synthetic oil gives the best

protection.

A SAE 30 - Below 40 °F (4 °C) the use of SAE 30 will result in hard starting.

B 10W-30 - Above 80 °F (27 °C) the use of 10W-30 may cause increased oil

consumption. Checkthe oil level frequently.

C 5W-30

D Synthetic 5W-30

EVanguard® Synthetic 15W-50

Check the Oil Level

Before you check or add oil

• Make sure the engine is level.

• Clean the oil fill area of debris.

• Refer to the Specifications section for oil capacity.

NOTICE

This engine was shipped from Briggs & Stratton without oil. Equipment manufacturers or

dealers could have added oil to the engine. Before you start the engine for the first time,

make sure that the oil is at the correct level. Add oil as specified by the instructions in

this manual. If you start the engine without oil, damage will occur and the engine will not

be repaired under warranty.

1. Remove the dipstick (A, Figure 4) and clean with a cloth.

2. Install and tighten the dipstick (A, Figure 4).

3. Remove the dipstick and check the oil level. Make sure that the oil level is at the

top of the full indicator (B, Figure 4) on the dipstick.

4. If the oil level is low, slowly add oil into the engine oil fill (C, Figure 4). Do not add

too much oil.

5. Wait one minute and check the oil level again. Make sure that the oil level is

correct.

6. Install and tighten the dipstick (A, Figure 4).

Low Oil Protection System (if installed)

A low oil sensor is installed on some engines. If the oil is low, the sensor will show a

warning light or stop the engine. Stop the engine and do the steps that follow before you

start the engine.

• Make sure that the engine is level.

• Do an oil check. Refer to the Check Oil Level section.

• If the oil level is low, add the correct amount of oil. Start the engine and make

sure that the warning light (if installed) does not come on.

• If the oil level is not low, do not start the engine. Contact a Briggs & Stratton

Authorized Service Dealer to correct the oil problem.

Fuel Recommendations

Fuel must meet these requirements:

• Clean, fresh, unleaded gasoline.

• A minimum of 87 octane/87 AKI (91 RON). High altitude use, see below.

• Gasoline with up to 10% ethanol (gasohol) is permitted.

NOTICE

Do not use unapproved gasoline, such as E15 and E85. Do not mix oil in gasoline or

change the engine to operate on alternate fuels. Use of unapproved fuels could result in

damage to engine components, which will not be repaired under the warranty.

To protect the fuel system from gum formation, and corrosion, mix analcohol-free fuel

stabilizer and ethanol treatmentinto the fuel. Refer to the Storage section. All fuel is not

Not for

Reproduction

the same. If start or performance problems occur, change fuel providers or brands. This

engine is certified to operate on gasoline. The emissions control system for carbureted

engines is EM (Engine Modifications). The emissions control systems for engines with

electronic fuel injection are ECM (Engine Control Module), MPI (Multi Port Injection), and

if equipped an O2S (Oxygen Sensor).

High Altitude

At altitudes over 5,000 feet (1524 meters), a minimum 85 octane/85 AKI (89 RON)

gasoline is permitted.

For carbureted engines, high altitude adjustment is required to maintain performance.

Operation without this adjustment will cause decreased performance, increased fuel

consumption, and increased emissions. Contact a Briggs & Stratton Authorized Service

Dealer for high altitude adjustment information. Operation of the engine at altitudes

below 2,500 feet (762 meters) with the high altitude adjustment is not recommended.

For Electronic Fuel Injection (EFI) engines, no high altitude adjustment is necessary.

Add Fuel

WARNING

Fuel and its vapors are flammable and explosive. Fire or explosion could result in

burns or death.

When you add fuel

• Stop the engine. Before you remove the fuel cap, wait a minimum of two (2)

minutes to make sure that the engine is cool.

• Fill the fuel tank outdoors or in an area that has good airflow.

• Do not put too much fuel in the tank. For expansion of the fuel, do not fill above

the bottom of the fuel tank neck.

• Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition

sources.

• Frequently examine the fuel lines, fuel tank, fuel cap, and connections for cracks

or leaks. Replace damaged parts.

• If fuel spills, wait until it dries before you start the engine.

1. Clean the fuel cap area of dirt and debris. Remove the fuel cap.

2. Fill the fuel tank (A, Figure 5) with fuel. Because fuel will expand, do not fill above

the bottom of the fuel tank neck (B).

3. Install the fuel cap.

Charge the Battery Pack

WARNING

Incorrect use of the battery and charger could result in an electrical shock or fire.

When you charge the battery pack

• Only use Briggs & Stratton battery chargers.

• Do not use the Briggs & Stratton battery charger on other types of batteries.

• Keep the battery charger dry. Do not let the battery pack get wet.

• To decrease the risk of damage to the electric plug and cord, pull the plug, not

the cord, when you disconnect the charger.

• If the charger has a damaged plug or cord, do not use it. The supply cord cannot

be replaced. A damaged charger must be replaced immediately.

• If the charger is damaged do not use it. The charger is not serviceable and must

be replaced.

• Do not disassemble or try to repair the charger.

• To prevent electric shock, disconnect the charger from the outlet before you

clean it.

• Do not put an object into the battery contacts. This will short-circuit the battery.

• All persons or children with decreased abilities (physical, sensory, mental) must

not use the charger unless looked after by an adult.

Extension cord

• Use of an incorrect extension cord could result in an electric shock or fire. If you

use an extension cord, make sure that:

1. The pins on the plug of the extension cord are the same number, size, and shape

as those of the plug on the charger;

2. The extension cord is correctly connected and in good electrical condition; and

3. For the correct AC ampere rating of the charger, make sure that the wire size is a

minimum of 16 AWG.

When to Charge the Battery Pack

First Time Portable Battery Pack –The Lithium‐Ion portable battery pack wasnot

fullycharged before shipment. To keep charge and to prevent damage while in storage,

the battery pack is programed to go into “sleep mode.” A quick charge of approximately

ten (10) seconds is necessary to wake-up the battery. Keep thebattery pack in the

charger until fully charged. To charge the battery pack, refer to the How to Charge the

Battery Pack section.

As Necessary –To check available charge, push the button on the Battery Fuel Gauge

(E, Figure 6 7). Refer to Battery Fuel Gauge section.

Storage –For storage periods more than 3 months, fully charge the battery pack before

storage.

How to Charge the Battery Pack

NOTE:Keep the battery charger dry. DO NOT get the battery pack wet.

1. Connect the battery charger (F, Figure 8 9)to an electrical outlet.

2. Portable Battery Pack: Put the portable battery pack (G, Figure 8)tightly into

the battery charging bay (F). If the RED charging light does not show, remove the

battery pack and install it again. Make sure that the battery pack is tightly in the

battery charging bay.

•RED light (A, Figure 6) shows the battery pack charges correctly.

•GREEN light (B) shows the battery pack is fully charged.

•FlashingRED light (C)shows that the battery pack is too hot or too cold and will

not accept a charge. Keep the battery pack connected. When the battery pack

is at the correct operating temperature, itcharges automatically.Refer to the

Specifications section for the correct operating temperature.

•Flashing RED / GREEN lights (D) show that the battery pack does not have a

charge and you must replace it.

3. Portable Battery Pack: From “sleep mode”, the battery will wake-up in

approximately ten (10) seconds.

4. Portable Battery Pack: A discharged battery pack will fully charge in approximately

one (1) hour. The battery pack will stay fully charged if kept on the charger.

5. Portable Battery Pack: When the GREEN light shows that the battery pack is fully

charged, remove the battery pack from the charger.

6. Integrated Battery Pack: Connect the charger plug (G, Figure 9)to the engine.

7. Integrated Battery Pack: A discharged battery pack will fully charge in

approximately four (4) hours.

8. Integrated Battery Pack: When the GREEN light shows that the battery pack is

fully charged, remove the battery pack from the charger.

9. To checkavailable charge, push the button on the Battery Fuel Gauge (E,

Figure 6 7).The display lights (H) show the percentage of available charge in the

battery.pack.

10. When the battery pack is not in operation, disconnect the battery charger from the

electrical outlet.

Battery Fuel Gauge

To check available charge, push the button on the Battery Fuel Gauge (E, Figure 6 7).

The display lights (H) show the percentage of available charge in the battery. pack.

Display Lights Available Charge

Four Lights 75% to 100%

Three Lights 50% to 75%

Two Lights 25% to 50%

One Light 10% to 25%

Flashing Light Low

Integrated Battery Pack: When connected to the charger, if all display lights are OFF,

then the battery is fully charged. Disconnect the charger.

Start the Engine

WARNING

Incorrect use of the battery and charger could result in an electrical shock or fire.

Operation

• Keep the battery charger dry. Do not let the battery pack get wet.

• To decrease the risk of electrical shock, do not let water flow into the AC plug.

• Do not put an object into the battery contacts. This will short-circuit the battery.

When you charge the battery pack

• Only use Briggs & Stratton battery chargers.

• Do not use the Briggs & Stratton battery charger on other types of batteries.

• Keep the battery charger dry. Do not let the battery pack get wet.

• To decrease the risk of damage to the electric plug and cord, pull the plug, not

the cord, when you disconnect the charger.

• If the charger has a damaged plug or cord, do not use it. The supply cord cannot

be replaced. A damaged charger must be replaced immediately.

• If the charger is damaged do not use it. The charger is not serviceable and must

be replaced.

• Do not disassemble or try to repair the charger.

• To prevent electric shock, disconnect the charger from the outlet before you

clean it.

Not for

Reproduction

• Do not put an object into the battery contacts. This will short-circuit the battery.

• All persons or children with decreased abilities (physical, sensory, mental) must

not use the charger unless looked after by an adult.

Extension cord

• Use of an incorrect extension cord could result in an electric shock or fire. If you

use an extension cord, make sure that:

1. The pins on the plug of the extension cord are the same number, size, and shape

as those of the plug on the charger;

2. The extension cord is correctly connected and in good electrical condition; and

3. For the correct AC ampere rating of the charger, make sure that the wire size is a

minimum of 16 AWG.

When you keep the battery pack in storage

• Keep the battery charger dry. Do not let the battery pack get wet.

Before you make adjustments or repairs

•Models with portable battery pack: Remove the battery pack from the battery

tray.

•Models with integrated battery pack: Disconnect the wire harness from the

starter motor.

WARNING

Fuel and its vapors are flammable and explosive. Fire or explosion could result in

burns or death.

When you start the engine

• Make sure that the spark plug, muffler, fuel cap and air cleaner (if equipped) are

correctly installed.

• Do not crank the engine with the spark plug removed.

• If the engine is flooded, set the choke (if equipped) to the OPEN or RUN

position. Move the throttle (if equipped) to the FAST position and crank until the

engine starts.

• If there is natural or LP gas leakage in the area, do not start the engine.

• Because vapors are flammable, do not use pressurized starter fluids.

WARNING

POISONOUS GAS HAZARD. Engine exhaust contains carbon monoxide, a

poisonous gas that could kill you in minutes. Although you do not smell exhaust

fumes, you could still be exposed to dangerous carbon monoxide gas. If you feel

sick, dizzy, or weak while you use this product, get to fresh air RIGHT AWAY. See

a doctor. You may have carbon monoxide poisoning.

• Carbon monoxide gas can collect in occupied spaces. To reduce the risk of

carbon monoxide gas, ONLY operate this product outdoors and far away from

windows, doors and vents.

• Install battery-operated carbon monoxide alarms or plug-in carbon monoxide

alarms with battery back-up as specified by the manufacturer's instructions.

Smoke alarms cannot sense carbon monoxide gas.

• DO NOT operate this product in homes, garages, basements, crawlspaces,

sheds, or other closed spaces, even if you use fans or open doors and windows

for ventilation. After the operation of this product, carbon monoxide can quickly

collect in these spaces and stay for hours.

• ALWAYS put this product downwind and point the engine exhaust away from

occupied spaces.

NOTICE

This engine was shipped from Briggs & Stratton without oil. Equipment manufacturers or

dealers could have added oil to the engine. Before you start the engine for the first time,

make sure that the oil is at the correct level. Add oil as specified by the instructions in

this manual. If you start the engine without oil, damage will occur and the engine will not

be repaired under warranty.

NOTE:Your equipment could have remote controls. Refer to the equipment manual for

location and operation of remote controls

1. Check the Engine Oil. See Check Oil Level section.

2. Models with Portable Battery Pack: Put the battery pack (B, Figure 10) in the

engine battery tray on top of the engine. Make sure that the battery pack is safely

installed. The battery pack can represent equipment key in some instances.

NOTE:Models with Portable Battery Pack: To wake-up a new battery, a First Time

quick charge of approximately ten (10) seconds is required. See When to Charge the

Battery Pack section.

3. Make sure that the equipment drive controls, if equipped, are disengaged.

4. Move the fuel shut-off valve (D, Figure 11), if equipped, to the OPEN position.

5. Move the throttle control (A, Figure 11), if equipped, to the FAST position. Operate

the engine in the FAST position.

6. Models with Electric Start Switch: Hold the engine stop lever (C, Figure 12), if

equipped, against the handle. Move the electric start switch to the START position.

See the equipment manual for the location and operation of the electric start switch.

7. Models without Electric Start Switch: Hold the engine stop lever (C, Figure 12)

against the handle. The engine will automatically start. See the equipment manual

for operation of the engine stop lever.

NOTICETo extend the life of the starter, use short starting cycles (five seconds

maximum). Wait one minute between starting cycles.

Models with Portable Battery Pack: If the engine will not crank and the battery

pack display lights flash, then the battery pack temperature is too hot or the current

draw is too high. All four battery display lights (H, Figure 13) will flash a warning

for 10 seconds. The battery pack does not have a fuse, but will automatically reset

after 10 seconds. If battery pack temperature is too hot (over 140°F, 60°C), remove

the battery and let it cool. To prevent too much current draw on lawnmowers, keep

the mower housing clean of accumulated grass and debris.

NOTE:If the engine does not start after 2-3 attempts, contact your local dealer or go to

BRIGGSandSTRATTON.COM or call 1-800-444-7774 (in USA).

Stop the Engine

1. Engine Stop Lever, if equipped: Release the engine stop lever (E, Figure 14).

2. Throttle Control, if equipped with stop feature: Move the throttle control (A,

Figure 15) to the OFF or STOP position.

3. Electric Start Switch, if equipped: Move the electric start switch to the OFF or

STOP position. See the equipment manual for the location and operation of the

switch. Remove the key and keep it in a safe location out of reach of children.

4. After the engine stops, move the fuel shut-off valve (D, Figure 16) to the CLOSED

position.

5. Models with Portable Battery Pack: Remove the battery pack. The battery pack

can represent equipment key in some instances.

Maintenance

Maintenance Information

WARNING

During maintenance if it is necessary to tilt the unit, make sure that the fuel tank, if

mounted on the engine, is empty and that the spark plug side is up. If the fuel tank is not

empty, leakage can occur and could result in a fire or an explosion. If the engine is tilted

in a different direction, it will not easily start because of oil or fuel contamination of the air

filter or the spark plug.

We recommend that you see a Briggs & Stratton Authorized Service Dealer for all

maintenance and servicing of the engine and engine parts.

NOTICE

All the components used to build this engine must remain in place for correct operation.

WARNING

Accidental engine spark can cause an electric shock or fire and could result in

entanglement, traumatic amputation or laceration.

Before you make adjustments or repairs:

• Disconnect the spark plug wire and keep it away from the spark plug.

•Models with portable battery pack: Remove the battery pack from the battery

tray. On some applications, the battery pack may be the equipment key.

•Models with integrated battery pack: Disconnect the wire harness from the

starter motor.

• Use only the correct tools.

When you check for spark:

• Use an approved spark plug tester.

• Do not check for spark with the spark plug removed.

Maintenance Schedule

First 5 Hours

•Change the oil (not necessary on models labeled Just Check & Add™ and No

Oil Changes).

Every 8 Hoursor Daily

• Check the engine oil level.

• Clean the area around muffler and controls.

• Clean the air intake grille.

Every 25 Hours or Annually

Not for

Reproduction

•Clean the air filter 1.

•Clean the pre-cleaner (if installed) 1.

Every 50 Hoursor Annually

•Change engine oil (not necessary on models labeled Just Check & Add ™ and

No Oil Changes).

Annually

• Replace the spark plug(s).

• Replace the air filter.

• Replace the pre-cleaner (if installed).

•Service the cooling system 1.

•Check the valve clearance 2.

1 Clean more frequently in dusty conditions or when many particles are in the air.

2 Not necessary unless engine performance problems occur.

Carburetor and Engine Speed

Do not make adjustments to the carburetor or engine speed. The carburetor was

set at the factory to operate satisfactorilyinmost conditions. Do not change the

governor spring, linkages, or other parts to adjust the engine speed. If adjustments

arenecessary,contact a Briggs & Stratton Authorized Service Dealer forservicing.

NOTICE

The equipment manufacturer specifies the maximum speed for the engine as installed

on the equipment. Do not exceed this speed. If you are not sure what the equipment

maximum speed is, or what the engine speed is set to from the factory, contact a Briggs

& Stratton Authorized Service Dealer for assistance. For safe and correct operation

of the equipment, the engine speed should only be adjusted by a qualified service

technician.

Servicing the Spark Plug

Check the spark plug gap (A, Figure 17) with a wire gauge (B). If necessary, set the

spark plug gap. Install and tighten the spark plug to the correct torque. For gapand

torque specifications, refer to the Specifications section.

NOTE:In some areas, it is mandatory by local law that you use a resistor spark plug

to decrease ignition signals.If a resistor spark plug was installed by the equipment

manufacturer, use the same type for replacement.

Servicing theExhaust System

WARNING

During operation, the engine and muffler become hot. If you touch a hot engine,

thermal burns can occur.

Combustible materials, such as leaves, grass and brush, can catch fire.

• Before you touch the engine or muffler, stop the engine and wait two (2)

minutes. Make sure that the engine and muffler are safe to touch.

• Remove debris from the muffler and engine.

It is a violation of California Public Resource Code, Section 4442, to use or operate the

engine on any forest-covered, brush-covered, or grass-covered land unless the exhaust

system is equipped with a spark arrester, as defined in section 4442, maintained in

effective working order. Other states or federal jurisdictions may have similar laws;

reference Federal Regulation 36 CFR Part 261.52. Contact the original equipment

manufacturer, retailer, or dealer to obtain a spark arrester designed for the exhaust

system installed on this engine.

Remove debris from the muffler and cylinder area. Inspect the muffler for cracks,

corrosion, or other damage. Remove the deflector or the spark arrester, if equipped, and

inspect for damage or carbon blockage. If damage is found, install the replacement parts

before you operate the equipment.

WARNING

Replacement parts must be of the same design and installed in the same position as the

original parts. Other parts could result in damage or an injury.

Change Engine Oil

WARNING

Fuel and its vapors are flammable and explosive. Fire or explosion could result in

burns or death.

During operation, the engine and muffler become hot. If you touch a hot engine,

thermal burns can occur.

• If you drain the oil from the top oil fill tube, the fuel tank must be empty. If it is not

empty, fuel leakage can occur and cause a fire or an explosion.

• Before you touch the engine or muffler, stop the engine and wait two (2)

minutes. Make sure that the engine and muffler are safe to touch.

Used oil is a hazardous waste product and must be discarded of correctly. Do not

discard with household waste. Contact your local authorities, service center, or dealer

for safe disposal or recycling facilities.

For Just Check & Add™ models, an oil change is not necessary. If an oil change is

necessary, refer to the procedure that follows.

Remove Oil

NOTE:The oil must be drained from the top of the oil fill tube.

1. With engine off but warm, disconnect the spark plug wire (D, Figure 1) and keep it

away from the spark plug (E).

2. Models with Integrated Battery: Disconnect the wire harness (F, Figure 19) from

the electric starter.

3. Remove the dipstick (A, Figure 20).

4. When you drain the oil from the top oil fill tube (C, Figure 21), keep the spark plug

(E) end of the engine up. Drain the oil into an approved container.

WARNING

When you drain the oil from the top oil fill tube, the fuel tank must be empty. If it is not

empty, fuel leakage can occur and could result in a fire or an explosion. Operate the

engine until the fuel tank is empty.

Add Oil

• Make sure the engine is level.

• Clean the oil fill area of all debris.

• Refer to the Specifications section for oil capacity.

1. Remove the dipstick (A, Figure 22). Remove oil from the dipstick with a clean cloth.

2. Slowly add oil into the engine oil fill (C, Figure 22). Do not put too much oil in the

engine oil fill.  Wait one minute and then check the oil level.

NOTE: Do not add oil at the quick oil drain, if equipped.

3. Install and tighten the dipstick (A, Figure 22).

4. Remove the dipstick and check the oil level. The correct oil level is at the top of the

full indicator (B, Figure 22) on the dipstick.

5. Install and tighten the dipstick (A, Figure 22).

6. Connect the spark plug wire(s)to the spark plug(s). See Remove Oil section.

Servicing the Air Filter

WARNING

Fuel vapors are flammable and explosive. Fire or explosion could result in burns

or death.

• Do notstart and operate the engine with the air cleaner assembly (if equipped)

or the air filter (if equipped) removed.

NOTICE

Do not use pressurized air or solvents to clean the filter. Pressurized air could result in

damage to the filter and solvents will dissolve the filter.

See the Maintenance Schedule for service requirements.

Different models will use a foam or a paper filter. Some models could also have an

optional pre-cleaner that can be washed and used again. Compare the illustrations in

this manual with the type installed on your engine and service as follows.

Paper Air Filter

1. Open the cover (B, Figure 23).

2. Remove the air filter (C, Figure 23).

3. Remove the pre-cleaner (E, Figure 23), if equipped, from the air filter (C, Figure 23).

4. To loosen debris, lightly tap the air filter (C, Figure 23) on a hard surface. If the filter

is dirty, replace it with a new filter.

Not for

Reproduction

5. Clean the pre-cleaner (E, Figure 23), in liquid detergent and water. Let the pre-

cleaner (E) fully air dry. DO NOT lubricate the pre-cleaner.

6. Assemble the dry pre-cleaner (E, Figure 23) to the air filter (C).

7. Install the air filter (C, Figure 23).

8. Close the cover (B, Figure 23).

Servicing the Cooling System

WARNING

During operation, the engine and muffler become hot. If you touch a hot engine,

thermal burns can occur.

Combustible debris, such as leaves, grass, and brush can catch fire.

• Before you touch the engine or muffler, stop the engine and wait two (2)

minutes. Make sure that the engine and muffler are safe to touch.

• Remove debris from the muffler and engine.

NOTICE

Do not use water to clean the engine. Water could cause contamination of the fuel

system. Use a brush or dry cloth to clean the engine.

This is an air cooled engine. Dirt or debris can prevent air flow and cause the engine to

become too hot and result in unsatisfactory performance and decreased engine life.

1. Use a brush or dry cloth to remove debris from the air intake grille.

2. Keep linkage, springs, and controls clean.

3. Keep the area around and behind the muffler, if equipped, free of combustible

debris.

4. Make sure the oil cooler fins, if equipped, are clean.

After a period of time, the cylinder cooling fins can collect debris and cause the engine

to overheat. Thisunwanted materialcannot be removed without partial disassembly of

the engine. Have a Briggs & Stratton Authorized Service Dealer inspect and clean the

air cooling system as recommended in the Maintenance Schedule.

Lithium-Ion Battery Pack Disposal

WARNING

Battery chemicals are poisonous and can cause corrosion.

Fire or explosion could result in burns or death.

Electrical Shock

• Do not burn used battery packs. Explosions, poisonous fumes and dangerous

materials can occur.

• Do not use a damaged battery.

Used and discarded battery packs can carry a small electrical charge. Always discard

used battery packs as specified by federal, state, and local regulations.

Storage

Fuel System

WARNING

Fuel and its vapors are flammable and explosive. Fire or explosion could result in

burns or death.

Fuel Storage

• Because pilot lights or other ignition sources can cause explosions, keep fuel or

equipment away from furnaces, stoves, water heaters or other appliances that

have pilot lights.

Electrical shock

• To avoid electrical shock, keep the battery charger dry. Do not let the battery

pack get wet.

Keep the engine level (normal operating position). Fill the fuel tank (A, Figure 24) with

fuel. For fuel expansion, do not fill above the fuel tank neck (B).

Fuel can become stale when kept in a storage container for more than 30 days.The use

of analcohol-free fuel stabilizer and ethanol treatmentin the fuel storage container is

recommended to prevent fuel degradation and to keep the fuel fresh.

When you fill the fuel container with fuel, addan alcohol-free fuel stabilizer as specified

by the manufacturer’s instructions.If gasoline in the engine has not been treated with a

fuel stabilizer, it must be drained into an approved container. Operate the engine until it

is out of fuel.

Engine Oil

While the engine is still warm, change the engine oil. Refer to Change the Engine Oil

section.

Battery Pack and Charger

When not in operation, disconnect the charger.Examinethe electrical terminals and

contacts on the battery packs and charger.Keep the charger in a cool, dry area.Wet,

damp areas can cause corrosion of terminals and electrical contacts.Clean the

terminals with a cloth or blow clean with compressed air.For storage periods more

than3 months, fully charge the battery pack before storage.

If kept in storage forlong periods in high temperatures (120°F / 49°C), or low

temperatures(-4°F - 31°F / -20°C - 0°C),permanent damage to the battery pack could

occur. If kept in storage for long periods in low temperatures, increase the temperature

of thebattery pack to operating temperatures as specified in the Specifications section

before you charge the battery pack.

After storage,charge the battery pack.Refer to the Charge the Battery Pack

section.To check for available charge, push thebutton on the Battery Fuel Gauge (E,

Figure 25 26).

Troubleshooting

Assistance

For assistance, contact your local dealer or go to BRIGGSandSTRATTON.COM or call

1-800-444-7774 (in USA).

Specifications

Specifications andService Parts

Model: 090000

Displacement 8.64 ci (140 cc)

Bore 2.495 in (63,4 mm)

Stroke 1.75 in (44,45 mm)

Oil Capacity 15 oz (,44 L)

Spark Plug Gap .020 in (,51 mm)

Spark Plug Torque 180 lb-in (20 Nm)

Armature Air Gap .006 - .014 in (,15 - ,36 mm)

Intake Valve Clearance .004 - .008 in (,10 - ,20 mm)

Exhaust Valve Clearance .004 - .008 in (,10 - ,20 mm)

Model: 093J00

Displacement 9.15 ci (150 cc)

Bore 2.58 in (65,60 mm)

Stroke 1.75 in (44,45 mm)

Oil Capacity 15 oz (,44 L)

Spark Plug Gap .020 in (,51 mm)

Spark Plug Torque 180 lb-in(20 Nm)

Armature Air Gap .006 - .014 in (,15 - ,36 mm)

Intake Valve Clearance .004 - .008 in (,10 - ,20 mm)

Exhaust Valve Clearance .004 - .008 in (,10 - ,20 mm)

Model: 100000

Displacement 9.93 ci (163 cc)

Bore 2.668 in (68,28 mm)

Stroke 1.75 in (44,45 mm)

Oil Capacity 15 oz (,44 L)

Spark Plug Gap 0.30 in (,76 mm)

Spark Plug Torque 180 lb-in (20 Nm)

Armature Air Gap .006 - .014 in (,15 - ,36 mm)

Intake Valve Clearance .004 - .008 in (,10 - ,20 mm)

Exhaust Valve Clearance .004 - .008 in (,10 - ,20 mm)

Lithium-ion Battery(Portable)

Lithium-Ion Battery Pack 10.8 V (10,8 V)

Charge Minutes 60

Charging Current 2 AMP (2 AMP)

Charger AC Input (Variable) 100- 240 V

Operating Temperature 32 °F- 113 °F (0 °C- 45 °C)

Not for

Reproduction

Lithium-ion Battery(Portable)

Storage Temperature -4 °F - 120 °F (-20 °C - 49 °C)

Lithium-ion Battery(Integrated)

Lithium-Ion Battery Pack 10.8 V (10,8 V)

Charge Minutes 240

Charging Current .5 AMP (,5 AMP)

Charger AC Input

(Variable)

100- 240 V

Operating Temperature 32 °F- 104 °F (0 °C- 4 °C )

Storage Temperature -4 °F - 120 °F (-20 °C - 49 °C)

Engine power will decrease 3.5% for each 1,000 feet (300 meters) above sea level

and 1% for each 10°F (5.6°C) above 77°F (25°C). The engine will operate satisfactorily

at an angle up to 15°. Refer to the equipment Operator's Manual for safe allowable

operating limits on slopes.

Service Parts - Models: 090000, 093J00, 100000

Service Part Part Number

Air Filter 593260

Air Filter Pre-Cleaner 595191

Oil - SAE 30 100005

Resistor Spark Plug 692051

Spark Plug Wrench 19576S

Spark Tester 84003327

Lithium-Ion Battery Pack (US / Canada) 593559

Lithium-Ion Battery Pack (EU, UK, AU) 593560

Lithium-Ion Battery Charger (US /

Canada)

593561

Lithium-Ion Battery Charger (EU) 593562

Lithium-Ion Battery Charger (UK) 593576

Lithium-Ion Battery Charger (AU) 594501

We recommend that you see a Briggs & Stratton Authorized Dealer for all maintenance

and servicing of the engine and engine parts.

Power Ratings

The gross power rating for individual gasoline engine models is labeled in accordance

with SAE (Society of Automotive Engineers) code J1940 Small Engine Power & Torque

Rating Procedure, and is rated in accordance with SAE J1995. Torque values are

derived at 2600 RPM for those engines with “rpm” called out on the label and 3060 RPM

for all others; horsepower values are derived at 3600 RPM. The gross power curves

can be viewed at www.BRIGGSandSTRATTON.COM. Net power values are taken with

exhaust and air cleaner installed whereas gross power values are collected without

these attachments. Actual gross engine power will be higher than net engine power and

is affected by, among other things, ambient operating conditions and engine-to-engine

variability. Given the wide array of products on which engines are placed, the gasoline

engine may not develop the rated gross power when used in a given piece of power

equipment. This difference is due to a variety of factors including, but not limited to, the

variety of engine components (air cleaner, exhaust, charging, cooling, carburetor, fuel

pump, etc.), application limitations, ambient operating conditions (temperature, humidity,

altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations,

Briggs & Stratton may substitute an engine of higher rated power for this engine.

Warranty

Briggs & Stratton® Engine Warranty

Effective August 2021

Limited Warranty

Briggs & Stratton warrants that, during the warranty period specified below, it will

repair or replace, free of charge, with a new, reconditioned or re-manufactured part,

at the sole discretion of Briggs & Stratton, any part that is defective in material or

workmanship or both. Transportation charges on product submitted for repair or

replacement under this warranty must be borne by purchaser. This warranty is effective

for and is subject to the time periods and conditions stated below. For warranty

service, find the nearest Authorized Service Dealer in our dealer locator map at

BRIGGSandSTRATTON.COM. The purchaser must contact the Authorized Service

Dealer, and then make the product available to the Authorized Service Dealer for

inspection and testing.

There is no other express warranty. Implied warranties, including those of

merchantability and fitness for a particular purpose, are limited to one year

from purchase, or to the extent permitted by law. All other implied warranties

are excluded. Liability for incidental or consequential damages are excluded

to the extent exclusion is permitted by law. Some states or countries do not allow

limitations on how long an implied warranty lasts, and some states or countries donot

allow the exclusion or limitation of incidental or consequential damages, so the above

limitation and exclusion may not apply to you. This warranty gives you specific legal

rights and you may also have other rights which vary from state to state and country to

country*.

Standard Warranty Terms 1, 2, 3

Vanguard®; Commercial Series 3

Consumer Use - 36 months

Commercial Use - 36 months

XR Series

Consumer Use - 24 months

Commercial Use - 24 months

All Other Engines Featuring Dura-Bore™ Cast Iron Sleeve

Consumer Use - 24 months

Commercial Use - 12 months

All Other Engines

Consumer Use - 24 months

Commercial Use - 3 months

1 These are our standard warranty terms, but occasionally there may be additional

warranty coverage that was not determined at time of publication. For a listing of

current warranty terms for your engine, go to BRIGGSandSTRATTON.COM or contact

your Briggs & Stratton Authorized Service Dealer.

2 There is no warranty for engines on equipment used for prime power in place of a

utility; standby generators used for commercial purposes, utility vehicles exceeding 25

MPH, or engines used in competitive racing or on commercial or rental tracks.

3 Vanguard® installed on standby generators: 24 months consumer use, no warranty

commercial use. Commercial Series with manufacturing date before July 2017: 24

months consumer use, 24 months commercial use.

* In Australia - Our goods come with guarantees that cannot be excluded under the

Australian Consumer Law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to a major failure. For warranty

service, find the nearest Authorized Service Dealer in our dealer locator map at

BRIGGSandSTRATTON.COM, or by calling 1300 274 447, or by emailing or writing

to [email protected], Briggs & Stratton Australia Pty Ltd, 1

Moorebank Avenue, Moorebank, NSW, Australia, 2170.

The warranty period begins on the date of purchase by the first retail consumer or

commercial end user, and continues for the period of time stated in the table above.

“Consumer use” means personal residential household use by a retail consumer.

“Commercial use” means all other uses, including use for commercial, income

producing or rental purposes. Once an engine has experienced commercial use,

it shall thereafter be considered as a commercial use engine for purposes of this

warranty.

No warranty registration is necessary to obtain warranty on Briggs & Stratton

products. Save your proof of purchase receipt. If you do not provide proof of the

initial purchase date at the time warranty service is requested, the manufacturing

date of the product will be used to determine the warranty period.

About Your Warranty

This limited warranty covers engine-related material and/or workmanship issues only,

and not replacement or refund of the equipment to which the engine may be mounted.

Routine maintenance, tune-ups, adjustments, or normal wear and tear are not covered

under this warranty. Similarly, warranty is not applicable if the engine has been altered

or modified or if the engine serial number has been defaced or removed. This warranty

does not cover engine damage or performance problems caused by:

1. The use of parts that are not original Briggs & Stratton parts;

2. Operating the engine with insufficient, contaminated, or an incorrect grade of

lubricating oil;

3. The use of contaminated or stale fuel, gasoline formulated with ethanol greater

than 10%, or the use of alternative fuels such as liquefied petroleum or natural gas

on engines not originally designed/manufactured by Briggs & Stratton to operate

on such fuels;

4. Dirt which entered the engine because of improper air cleaner maintenance or

reassembly;

5. Striking an object with the cutter blade of a rotary lawn mower, loose or improperly

installed blade adapters, impellers, or other crankshaft coupled devices, or

excessive v-belt tightness;

6. Associated parts or assemblies such as clutches, transmissions, equipment

controls, etc., which are not supplied by Briggs & Stratton;

Not for

Reproduction

7. Overheating due to grass clippings, dirt and debris, or rodent nests which plug or

clog the cooling fins or flywheel area, or by operating the engine without sufficient

ventilation;

8. Excessive vibration due to over-speeding, loose engine mounting, loose or

unbalanced cutter blades or impellers, or improper coupling of equipment

components to the crankshaft;

9. Misuse, lack of routine maintenance, shipping, handling, or warehousing of

equipment, or improper engine installation.

Warranty service is available only through Briggs & Stratton Authorized Service

Dealers. Locate your nearest Authorized Service Dealer in our dealer locator map at

BRIGGSandSTRATTON.COM or by calling 1-800-444-7774 (in USA).

80004537(Revision G)

Briggs & Stratton Emissions Warranty

California, U.S. EPA, and Briggs & Stratton, LLC Emissions Control Warranty -

Your Warranty Rights and Obligations

For Briggs & Stratton Engine Models with "B" or "G" Trim Designation (Model-

Type-Trim Representation xxxxxx xxxx Bx or xxxxxx xxxx Gx)

The California Air Resources Board, U.S. EPA, and Briggs & Stratton (B&S) are

pleased to explain the exhaust emissions (“emissions”) control system warranty on

your2021-2023engine. In California, new small off-road engines and large spark

ignited engines less than or equal to 1.0 liter must be designed, built, and equipped

to meet the State’s stringent anti-smog standards.B&S must warrant the emissions

control system on your engine for the periods of time listed below provided there has

been no abuse, neglect or improper maintenance of your small off-road engine or

equipment leading to the failure of the emissions control system.

Your emissions control system may include parts such as the carburetor or fuel-

injection system, the ignition system, catalytic converter, fuel tanks, fuel lines (for liquid

fuel and fuel vapors), fuel caps, valves, canisters, filters, clamps and other associated

components.Also included may be hoses, belts, connectors, and other emission-

related assemblies.

Where a warrantable condition exists, B&S will repair your engine at no cost to you

including diagnosis, parts, and labor.

Manufacturer’s Warranty Coverage:

The exhaust emissions control system on your engine is warranted for two years.If any

emissions-related part on your engine is defective, the part will be repaired or replaced

by B&S.

Owner’s Warranty Responsibilities:

• As the engine owner, you are responsible for the performance of the required

maintenance listed in your owner’s manual.B&S recommends that you retain

all receipts covering maintenance on your engine, but B&S cannot deny

warranty coverage solely for the lack of receipts or for your failure to ensure the

performance of all scheduled maintenance.

• As the engine owner, you should however be aware that B&S may deny you

warranty coverage if your engine or a part has failed due to abuse, neglect, or

improper maintenance or unapproved modifications.

• You are responsible for presenting your engine to a B&S distribution center

or service center as soon as the problem exists. The warranty repairs shall

be completed in a reasonable amount of time, not to exceed 30 days.If you

have a question regarding your warranty rights and responsibilities, you should

contact B&S at 1-800-444-7774 (in USA) or BRIGGSandSTRATTON.COM.

Briggs & Stratton Emissions Control Warranty Provisions

The following are specific provisions relative to your Emissions Control Warranty

Coverage. It is in addition to the B&S engine warranty for non-regulated engines found

in the Operator’s Manual.

1. Warranted Emissions Parts

Coverage under this warranty extends only to the parts listed below (the emissions

control systems parts) to the extent these parts were present on the B&S engine.

a. Fuel Metering System

• Cold start enrichment system (soft choke)

• Carburetor or fuel injection system

• Oxygen sensor

• Electronic control unit

• Fuel pump module

b. Air Induction System

• Air cleaner

• Intake manifold

c. Ignition System

• Spark plug(s)

• Magneto ignition system

d. Catalyst System

• Catalytic converter

• Exhaust manifold

• Air injection system or pulse value

e. Miscellaneous Items Used in Above Systems

• Vacuum, temperature, position, time sensitive valves and switches

• Connectors and assemblies

• Electronic controls

2. Length of Coverage

Coverage is for a period of two years from the date of delivery to an ultimate

purchaser, or for the time period listed in the respective engine or product warranty

statement, whichever is greater. B&S warrants to the original purchaser and each

subsequent purchaser that the engine is designed, built, and equipped so as to

conform with all applicable regulations adopted by the Air Resources Board; that

it is free from defects in material and workmanship that could cause the failure

of a warranted part; and that it is identical in allmaterial respects to the engine

described in the manufacturer’s application for certification. The warranty period

begins on the date the engine or equipment is delivered to an ultimate purchaser.

The warranty on emissions-related parts is as follows:

• Any warranted part that is not scheduled for replacement as required

maintenance in the Operator’s Manual supplied, is warranted for the warranty

period stated above. If any such part fails during the period of warranty

coverage, the part will be repaired or replaced by B&S at no charge to

the owner. Any such part repaired or replaced under the warranty will be

warranted for the remaining warranty period.

• Any warranted part that is scheduled only for regular inspection in the

Operator’s Manual supplied, is warranted for the warranty period stated

above. Any such part repaired or replaced under warranty will be warranted

for the remaining warranty period.

• Any warranted part that is scheduled for replacement as required

maintenance in the Operator’s Manual supplied, is warranted for the period of

time prior to the first scheduled replacement point for that part. If the part fails

prior to the first scheduled replacement, the part will be repaired or replaced

by B&S at no charge to the owner. Any such part repaired or replaced under

warranty will be warranted for the remainder of the period prior to the first

scheduled replacement point for the part.

• Add-on or modified parts that are not exempted by the Air Resources Board

may not be used. The use of any non-exempted add-on or modified parts by

the owner will be grounds for disallowing a warranty claim. The manufacturer

will not be liable to warrant failures of warranted parts caused by the use of a

non-exempted add-on or modified part.

3. Consequential Coverage

Coverage shall extend to the failure of any engine components caused by the

failure of any warranted emissions parts.

4. Claims and Coverage Exclusions

Warranty claims shall be filed according to the provisions of the B&S engine

warranty policy. Warranty coverage does not apply to failures of emissions

parts that are not original equipment B&S parts or to parts that fail due to abuse,

neglect, or improper maintenance as set forth in the B&S engine warranty policy.

B&S is not liable for warranty coverage of failures of emissions parts caused by

the use of add-on or modified parts.

Look For Relevant Emissions Durability Period and Air Index Information On

Your Small Off-Road Engine Emissions Label

Engines that are certified to meet the California Air Resources Board (CARB) small off-

road Emissions Standard must display information regarding the Emissions Durability

Not for

Reproduction

Period and the Air Index. Briggs & Stratton makes this information available to the

consumer on our emissions labels. The engine emissions label will indicate certification

information.

The Emissions Durability Period describes the number of hours of actual running

time for which the engine is certified to be emissions compliant, assuming proper

maintenance in accordance with the Operator’s Manual. The following categories are

used:

Moderate:

Engines at or less than 80 cc displacement are certified to be emissions compliant for

50 hours of actual engine running time. Engines greater than 80 cc displacement are

certified to be emissions compliant for 125 hours of actual engine running time.

Intermediate:

Engines at or less than 80 cc displacement are certified to be emissions compliant for

125 hours of actual engine running time. Engines greater than 80 cc displacement are

certified to be emissions compliant for 250 hours of actual engine running time.

Extended:

Engines at or less than 80 cc displacement are certified to be emissions compliant for

300 hours of actual engine running time. Engines greater than 80 cc displacement are

certified to be emissions compliant for 500 hours of actual engine running time.

For example, a typical walk-behind lawn mower is used 20 to 25 hours per year.

Therefore, the Emissions Durability Period of an engine with an intermediate rating

would equate to 10 to 12 years.

Briggs & Stratton engines are certified to meet the United States Environmental

Protection Agency (USEPA) Phase 2 or Phase 3 emissions standards. The Emissions

Compliance Period referred to on the Emissions Compliance label indicates the

number of operating hours for which the engine has been shown to meet Federal

emissions requirements.

For engines at or less than 80 cc displacement:

Category C = 50 hours, Category B = 125 hours, Category A = 300 hours

For engines greater than 80 cc displacement and less than 225 cc displacement:

Category C = 125 hours, Category B = 250 hours, Category A = 500 hours

For engines of 225 cc or more displacement:

Category C = 250 hours, Category B = 500 hours, Category A = 1000 hours

80106344 (Revision A)

Briggs & Stratton Emissions Warranty

California, U.S. EPA, and Briggs & Stratton, LLC Emissions Control Warranty -

Your Warranty Rights and Obligations

For Briggs & Stratton Engine Models with "F" Trim Designation (Model-Type-

Trim Representation xxxxxx xxxx Fx)

The California Air Resources Board, U.S. EPA, and Briggs & Stratton (B&S) are

pleased to explain the exhaust and evaporative emissions (“emissions”) control system

warranty on your2021-2023engine. In California, new equipment that use small off-

road engines must be designed, built, and equipped to meet the State's stringent anti-

smog standards.B&S must warrant the emissions control system on your engine/

equipment for the periods of time listed below provided there has been no abuse,

neglect or improper maintenance of your small off-road engine or equipment leading to

the failure of the emissions control system.

Your emissions control system may include parts such as the carburetor or fuel-

injection system, the ignition system, catalytic converter, fuel tanks, fuel lines (for liquid

fuel and fuel vapors), fuel caps, valves, canisters, filters, clamps and other associated

components.Also included may be hoses, belts, connectors, and other emission-

related assemblies.

Where a warrantable condition exists, B&S will repair your engine/equipment at no cost

to you including diagnosis, parts, and labor.

Manufacturer's Warranty Coverage:

The exhaust and evaporative emissions control system on your engine/equipment

is warranted for two years. If any evaporative emission-related part on your engine/

equipment is defective, the part will be repaired or replaced by B&S.

Owner’s Warranty Responsibilities:

• As the engine/equipment owner, you are responsible for the performance of

the required maintenance listed in your owner’s manual. B&S recommends

that you retain all receipts covering maintenance on your engine, but B&S

cannot deny warranty coverage solely for the lack of receipts or for your failure

to ensure the performance of all scheduled maintenance.

• As the engine/equipment owner, you should however be aware that B&S may

deny you warranty coverage if your engine/equipment or a part has failed due

to abuse, neglect, or improper maintenance or unapproved modifications.

• You are responsible for presenting your engine/equipment to a B&S

distribution center or service center as soon as the problem exists. The

warranty repairs shall be completed in a reasonable amount of time, not

to exceed 30 days.If you have a question regarding your warranty rights

and responsibilities, you should contact B&S at 1-800-444-7774 (in USA) or

BRIGGSandSTRATTON.COM.

Briggs & Stratton Emissions Control Warranty Provisions

The following are specific provisions relative to your Emissions Control Warranty

Coverage. It is in addition to the B&S engine warranty for non-regulated engines found

in the Operator’s Manual.

1. Warranted Emissions Parts

Coverage under this warranty extends only to the parts listed below (the emissions

control systems parts) to the extent these parts were present on the B&S engine

and/or B&S supplied fuel system.

a. Fuel Metering System

• Cold start enrichment system (soft choke)

• Carburetor or fuel injection system

• Oxygen sensor

• Electronic control unit

• Fuel pump module

• Fuel line (for liquid fuel and fuel vapors), fuel line fittings, clamps

• Fuel tank, cap and tether

• Carbon canister and mounting bracket

• Pressure relief valves

• Liquid/Vapor separator

b. Air Induction System

• Air cleaner

• Intake manifold

• Purge and vent line

c. Ignition System

• Spark plug(s)

• Magneto ignition system

d. Catalyst System

• Catalytic converter

• Exhaust manifold

• Air injection system or pulse value

e. Miscellaneous Items Used in Above Systems

• Vacuum, temperature, position, time sensitive valves and switches

• Connectors and assemblies

• Electronic controls

Not for

Reproduction

2. Length of Coverage

Coverage is for a period of two years from the date of delivery to an ultimate

purchaser, or for the time period listed in the respective engine or product warranty

statement, whichever is greater. B&S warrants to the original purchaser and each

subsequent purchaser that the engine is designed, built, and equipped so as to

conform with all applicable regulations adopted by the Air Resources Board; that

it is free from defects in material and workmanship that could cause the failure

of a warranted part; and that it is identical in all material respects to the engine

described in the manufacturer’s application for certification. The warranty period

begins on the date the engine or equipment is delivered to an ultimate purchaser.

The warranty on emissions-related parts is as follows:

• Any warranted part that is not scheduled for replacement as required

maintenance in the Operator’s Manual supplied, is warranted for the warranty

period stated above. If any such part fails during the period of warranty

coverage, the part will be repaired or replaced by B&S at no charge to

the owner. Any such part repaired or replaced under the warranty will be

warranted for the remaining warranty period.

• Any warranted part that is scheduled only for regular inspection in the

Operator’s Manual supplied, is warranted for the warranty period stated

above. Any such part repaired or replaced under warranty will be warranted

for the remaining warranty period.

• Any warranted part that is scheduled for replacement as required

maintenance in the Operator’s Manual supplied, is warranted for the period of

time prior to the first scheduled replacement point for that part. If the part fails

prior to the first scheduled replacement, the part will be repaired or replaced

by B&S at no charge to the owner. Any such part repaired or replaced under

warranty will be warranted for the remainder of the period prior to the first

scheduled replacement point for the part.

• Add-on or modified parts that are not exempted by the Air Resources Board

may not be used. The use of any non-exempted add-on or modified parts by

the owner will be grounds for disallowing a warranty claim. The manufacturer

will not be liable to warrant failures of warranted parts caused by the use of a

non-exempted add-on or modified part.

3. Consequential Coverage

Coverage shall extend to the failure of any engine components caused by the

failure of any warranted emissions parts.

4. Claims and Coverage Exclusions

Warranty claims shall be filed according to the provisions of the B&S engine

warranty policy. Warranty coverage does not apply to failures of emissions

parts that are not original equipment B&S parts or to parts that fail due to abuse,

neglect, or improper maintenance as set forth in the B&S engine warranty policy.

B&S is not liable for warranty coverage of failures of emissions parts caused by

the use of add-on or modified parts.

Look For Relevant Emissions Durability Period and Air Index Information On

Your Small Off-Road Engine Emissions Label

Engines that are certified to meet the California Air Resources Board (CARB) small off-

road Emissions Standard must display information regarding the Emissions Durability

Period and the Air Index. Briggs & Stratton makes this information available to the

consumer on our emissions labels. The engine emissions label will indicate certification

information.

The Emissions Durability Period describes the number of hours of actual running

time for which the engine is certified to be emissions compliant, assuming proper

maintenance in accordance with the Operator’s Manual. The following categories are

used:

Moderate:

Engines at or less than 80 cc displacement are certified to be emissions compliant for

50 hours of actual engine running time. Engines greater than 80 cc displacement are

certified to be emissions compliant for 125 hours of actual engine running time.

Intermediate:

Engines at or less than 80 cc displacement are certified to be emissions compliant for

125 hours of actual engine running time. Engines greater than 80 cc displacement are

certified to be emissions compliant for 250 hours of actual engine running time.

Extended:

Engines at or less than 80 cc displacement are certified to be emissions compliant for

300 hours of actual engine running time. Engines greater than 80 cc displacement are

certified to be emissions compliant for 500 hours of actual engine running time.

For example, a typical walk-behind lawn mower is used 20 to 25 hours per year.

Therefore, the Emissions Durability Period of an engine with an intermediate rating

would equate to 10 to 12 years.

Briggs & Stratton engines are certified to meet the United States Environmental

Protection Agency (USEPA) Phase 2 or Phase 3 emissions standards. The Emissions

Compliance Period referred to on the Emissions Compliance label indicates the

number of operating hours for which the engine has been shown to meet Federal

emissions requirements.

For engines at or less than 80 cc displacement:

Category C = 50 hours, Category B = 125 hours, Category A = 300 hours

For engines greater than 80 cc displacement and less than 225 cc displacement:

Category C = 125 hours, Category B = 250 hours, Category A = 500 hours

For engines of 225 cc or more displacement:

Category C = 250 hours, Category B = 500 hours, Category A = 1000 hours

80106346(Revision A)

Not for

Reproduction

Обща информация

Това ръководство съдържа информация за безопасна работа, за да сте наясно с

опасностите и рисковете, свързани с този двигател и как да ги предотвратите. То

съдържа също инструкции за правилна употреба и техническо обслужване. Тъй

като в Briggs & Stratton не знаят каква машина ще се задвижва с този двигател,

важно е да прочетете, разберете и спазвате тези инструкции. Запазете тези

оригинални инструкции за бъдещи справки.

ЗАБЕЛЕЖКА:Данните и илюстрациите в настоящото ръководство са

предоставени само за справка и може да се различават от Вашия конкретен

модел. При нужда от помощ, се свържете с упълномощен сервизен представител.

Относно резервните части или техническата помощ, запишете датата на

покупката, модела, типа, конструкцията и серийния номер на двигателя. Тези

номера са разположени върху Вашия двигател. Вижте раздела Елементи и

прибори за управление.

Дата на закупуване

Модел - Тип - Конструкция на

двигателя

Сериен номер на двигателя

Информация за контакт на Европейската

служба

За въпроси относно емисиите в Европейския съюз, се свържете с нашата

Европейска служба на адрес:

Max-Born-Straße 2, 68519 Viernheim, Германия.

Стандарт Euro ниво V (5) на ЕС:

Стойности на въглероден диоксид (CO2)

Въведете „CO2“ в полето за търсене на уебсайта BriggsandStratton.com, за да

намерите стойностите на емисиите въглероден диоксид за двигателите на Briggs &

Stratton, които имат сертификат за типово одобрение от ЕС.

Информация за рециклиране

Рециклирайте всички кашони, кутии, използвано масло

и батерии, както е посочено в правителствените

разпоредби.

Безопасност на оператора

Предупредителен символ за опасност и

сигнални думи

Предупредителният символ за безопасност се

използва за обозначаване на информацията за безопасност, свързани с

опасности, които могат да доведат до нараняване. Сигнализираща дума

(ОПАСНОСТ,ПРЕДУПРЕЖДЕНИЕ или ВНИМАНИЕ) се поставя, за да посочи

вероятността и потенциалната сериозност на нараняването. Освен това, даден

символ за опасност се използва, за да се представи видът на опасността.

ОПАСНОСТ посочва опасност, която, ако не бъде избегната, ще доведе до смърт

или сериозно нараняване.

ПРЕДУПРЕЖДЕНИЕ посочва опасност, която, ако не бъде избегната, може да

доведе до смърт или сериозно нараняване.

ВНИМАНИЕ посочва опасност, която, ако не бъде избегната, може да доведе до

малка или средна степен на нараняване.

ПРЕДУПРЕЖДЕНИЕпосочва информация, считана за важна, но несвързана с

опасности.

Символи за опасности и техните значения

Информация за

безопасност относно

опасности, които могат

да доведат до телесно

нараняване.

Прочетете и разберете

Ръководството за

оператора, преди да

работите или правите

техническо обслужване

на машината.

Опасност от пожар Опасност от експлозия

Опасност от

електрически удар

Опасност от токсични

пари

Опасност от нагорещена

повърхност

Опасност от висок шум

– При продължително

ползване се препоръчва

защита на слуха.

Опасност от изхвърляне

на предмет – Носете

защитни очила.

Опасност от експлозия

Опасност от обледяване Опасност от откат

Опасност от отрязване

на крайник – Движещи се

части

Опасност от химикали

Опасност от топлинно

въздействие

Опасност от корозия

Съобщения за безопасност

ПРЕДУПРЕЖДЕНИЕ

Двигателите на Briggs & Stratton® не са предназначени за и не трябва да се

използват за захранване на: развлекателни картове; състезателни картове;

детски, развлекателни или спортни вседеходни превозни средства (АТВ-

та); мотоциклети; съдове на въздушна възглавница; продукти за авиацията

или превозни средства, използвани в състезания, които не са разрешени

от Briggs & Stratton. За информация относно изделия за състезателни цели,

вижте www.briggsracing.com. При използване на превозни средства с общо

предназначение и такива с повишена проходимост (ATV), моля свържете се с

приложния център за захранване на Briggs & Stratton на тел. 1-866-927-3349.

Неправилната употреба на двигателя може да доведе до сериозни наранявания

или смърт.

ПРЕДУПРЕЖДЕНИЕ

Горивото и неговите пари са възпламеними и взривоопасни. Пожар или

експлозия може да доведе до изгаряния или смърт.

Когато добавяте гориво

• Спрете двигателя. Преди да свалите капачката за гориво, изчакайте най-

малко две (2) минути, за да си гарантирате, че двигателят се е охладил.

• Напълнете резервоара за гориво на открито или в помещение с добра

вентилация.

• Не слагайте твърде много гориво в резервоара. За да оставите възможност

за разширение на горивото, не пълнете над долната част на гърлото на

резервоара за гориво.

• Дръжте горивото далече от искри, открити пламъци, пилотни светлини,

топлина и други източници на запалване.

• Често преглеждайте горивопроводите, резервоара за гориво, капачката

на горивото и връзките за наличие на пукнатини или течове. Подменете

повредените части.

• Ако горивото се разлее, изчакайте, докато се изпари преди да стартирате

двигателя.

Когато стартирате двигателя

• Уверете се, че запалителната свещ, шумозаглушителят, капачката на

резервоара за гориво и въздушният филтър (ако има такива) са монтирани

правилно.

• Не стартирайте двигателя без запалителна свещ.

• Ако двигателят е задавен, поставете смукача (ако има такъв) в положение

ОТВОРЕНО или РАБОТА. Поставете прибора за управление на дроселната

клапа в положение БЪРЗО (ако има такъв) и въртете, докато двигателят

стартира.

Not for

Reproduction

• Ако в областта има изтичане на природен газ или газ LP, не стартирайте

двигателя.

• Не използвайте течности за начално запалване под налягане, защото

парите им са възпламеними.

Когато работите с оборудването

• Не накланяйте двигателя или машината под ъгъл, при който горивото се

разлива.

• Не запушвайте карбуратора (ако има такъв) за да спрете двигателя.

• Не стартирайте и не работете с двигателя при демонтиран комплект на

въздушния филтър (ако има такъв) или със свален въздушен филтър (ако

има такъв).

Когато извършвате техническо обслужване

• Ако източвате маслото от горната тръба за пълнене на масло, резервоарът

за гориво трябва да бъде празен. Ако не е празен, може да изтече гориво и

да причини пожар или експлозия.

• По време на поддръжката, ако е необходимо да наклоните уреда, уверете

се, че резервоарът за гориво, ако е монтиран на двигателя, е празен и че е

изправен откъм страната на запалващата свещ. Ако резервоарът за гориво

не е празен, може да изтече гориво и да причини пожар или експлозия.

• Често преглеждайте горивопроводите, резервоара за гориво, капачката

на горивото и връзките за наличие на пукнатини или течове. Подменете

повредените части.

• Не променяйте регулираща пружина, връзки или други части, за да

повишавате оборотите на двигателя.

• Не удряйте маховика с чук или твърд предмет. Това може да доведе до

повреда на маховика по време на работа.

• Резервните части трябва да бъдат със същата конструкция и да се

монтират в същото положение, както оригиналните части. Другите части

може да се повредят или да се причини нараняване.

Когато местите местоположението на оборудването

• Уверете се, че резервоарът за гориво е ПРАЗЕН и че клапаните за

изключване са в позиция ЗАТВОРЕНО.

Когато складирате гориво или оборудване с гориво в резервоара

• Тъй като сигналните светлини или други източници на запалване могат да

причинят експлозии, дръжте горивото или оборудването далеч от пещи,

печки, бойлери или други уреди, които имат сигнални светлини.

ПРЕДУПРЕЖДЕНИЕ

Горивото и неговите пари са възпламеними и взривоопасни. Пожар или

експлозия може да доведе до изгаряния или смърт.

Стартирането на двигателя предизвиква искра, която може да доведе до

пожар или експлозия.

• Ако в областта има изтичане на природен газ или газ LP, не стартирайте

двигателя.

• Не използвайте течности за начално запалване под налягане, защото

парите им са възпламеними.

ПРЕДУПРЕЖДЕНИЕ

ОПАСНОСТ ОТ ОТРОВНИ ГАЗОВЕ. Отработените газове от двигателя

съдържат въглероден оксид, отровен газ, който би могъл да Ви убие за

минути. Дори ако не усещате отработените газове, все още можете да бъдете

изложени на въздействието на отровен въглероден оксид. Ако усетите

гадене, замайване или слабост докато използвате този продукт, ВЕДНАГА

излезте на чист въздух. Отидете на лекар. Възможно е да сте получили

отравяне с въглероден окис.

• Въглеродният окис може да се натрупва в затворени помещения.

Работете с този продукт САМО на открито, далече от прозорци, врати и

вентилационни отвори, за да намалите риска от натрупване на въглероден

окис.

• Монтирайте сигнални уредби за наличие на въглероден оксид, захранвани

с батерии или чрез щепсел, според инструкциите на производителя.

Сигналните уредби за дим не могат да засичат въглероден окис.

• НЕ РАБОТЕТЕ с този продукт в домове, гаражи, мазета, непреходни

коридори, хангари или други затворени помещения, дори при използване

на вентилатори или при отворени врати и прозорци за вентилация. След

работата с този продукт, въглеродният окис може бързо да се натрупа в

тези помещения и да остане с часове.

• ВИНАГИ поставяйте този продукт по посока на въздушното течение

и насочвайте изгорелите газове от двигателя далече от обитаваните

помещения.

ПРЕДУПРЕЖДЕНИЕ

Въртящите се части могат да захванат ръце, крака, коса, облекло или

аксесоари и това може да доведе до травматична ампутация или сериозно

нараняване.

• Работете с оборудването с правилно поставени предпазители.

• Дръжте ръцете и краката си на разстояние от въртящите се части.

• Свалете бижутата си и се уверете, че косата Ви е далече от всички

въртящи се части.

• Не носете широки дрехи или аксесоари, които могат да бъдат захванати.

ПРЕДУПРЕЖДЕНИЕ

По време на работа, двигателят и шумузаглушителят се нагорещяват. Ако

докоснете горещ двигател, може да се изгорите.

Запалимите материали, като листа, трева и сухи клонки, могат да се запалят.

• Преди да докоснете двигателя или шумозаглушителя, спрете двигателя

и изчакайте две (2) минути. Уверете се, че е безопасно да докосвате

двигателя и шумозаглушителя.

• Отстранете отпадъците от шумозаглушителя и двигателя.

Според Правилника на Калифорния за обществените ресурси, раздел 4442,

използването или работата с двигателя по залесени с гори, храсти или с треви

площи представлява нарушение, освен ако системата за отработени газове не

е снабдена с искрогасител, поддържан в ефикасно работно състояние, както е

определено в раздел 4442. Други щати или федерални юрисдикции могат да имат

подобни закони; за справка – Федерален регламент 36CFR, част261.52. Свържете

се с производителя, търговеца или продавача на оригинално оборудване, за да

получите искроуловител, проектиран за системата за отработени газове на този

двигател.

ПРЕДУПРЕЖДЕНИЕ

Случайна искра на двигателя може да причини токов удар или пожар, и може

да доведе до заплитане, травматична ампутация или разкъсване.

Преди да извършвате настройки или поправки:

• Откачете кабела на запалителната свещ и го дръжте далече от нея.

• Откачете кабела на отрицателната клема на акумулатора (само при

двигатели с електрически стартер).

• Използвайте само правилните инструменти.

Когато проверявате за искра:

• Използвайте одобрен тестер за свещи.

• Не проверявайте за искра при извадена запалителна свещ.

ПРЕДУПРЕЖДЕНИЕ

Изпаренията на горивата са възпламеними и взривоопасни. Пожар или

експлозия може да доведе до изгаряния или смърт.

Ако Ви замирише на газ

• Не стартирайте двигателя.

• Не включвайте електрическите ключове.

• Не използвайте телефон в непосредствена близост.

• Напуснете мястото.

• Повикайте доставчика на газ или противопожарната служба.

ПРЕДУПРЕЖДЕНИЕ

Неправилна употреба на акумулатора и зарядното устройство може да

доведе до електрически удар или пожар.

Експлоатация

• Поддържайте зарядното устройство на акумулатора сухо. Пазете блок

акумулатора от навлажняване.

• За да намалите риска от електрически удар, не допускайте в щепсела за

AC да прониква вода.

• Не поставяйте предмети върху щепсела на акумулатора. Това ще

предизвика късо съединение в акумулатора.

Кога да се зарежда блок акумулатора

• Използвайте само зарядни устройства за акумулатори на Briggs & Stratton.

• Не използвайте зарядно устройство Briggs & Stratton за други типове

акумулатори.

• Поддържайте зарядното устройство на акумулатора сухо. Пазете блок

акумулатора от навлажняване.

• За да намалите риска от повреждане на щепсела и кабела за захранване

с ток, при изключване на зарядното устройство изтеглете щепсела, а не

кабела.

Not for

Reproduction

• Не работете със зарядното устройство, ако щепселът или кабелът са

повредени. Кабелът за захранване с ток не може да бъде заменян.

Повредено зарядно устройство трябва да бъде заменено веднага.

• Ако зарядното устройство е повредено, не го използвайте. Зарядното

устройство не се обслужва и трябва да бъде сменено.

• Не разглобявайте и не се опитвайте да поправите зарядното устройство.

• За да предотвратите токов удар, изключете зарядното устройство от

контакта преди да го почистите.

• Не поставяйте предмети върху щепсела на акумулатора. Това ще

предизвика късо съединение в акумулатора.

• Лица или деца с намалени способности (физически, сетивни, умствени) не

трябва да използват зарядното устройство, освен ако не се наблюдават от

възрастен.

Удължаващ кабел

• Употребата на неподходящ удължаващ кабел може да доведе до риск от

токов удар или пожар. Ако използвате удължаващ кабел, уверете се, че:

1. Щифтовете на щепсела на удължаващия кабел са със същия брой, размер и

форма като тези на щепсела на зарядното устройство;

2. Удължаващият кабел е правилно свързан и е в добро електрическо

състояние; и

3. Размерът на проводника е най-малко 16AWG, за да пропуска номиналния AC

ток на зарядното устройство.

Когато съхранявате блок акумулатора в сервизно помещение

• Поддържайте зарядното устройство на акумулатора сухо. Пазете блок

акумулатора от навлажняване.

Преди да извършвате настройки или поправки

•Модели с преносим блок акумулатор: Свалете блок акумулатора от

отделението за акумулатора.

•Модели с вграден блок акумулатор: Изключете кабела на проводника от

стартера на двигателя.

ПРЕДУПРЕЖДЕНИЕ

Химикалите от акумулатора са отровни и могат да причинят корозия.

Пожар или експлозия може да доведе до изгаряния или смърт.

Електрически удар

• Не изгаряйте употребявани блок акумулатори. Могат да възникнат

експлозии, отровни изпарения и да се отделят опасни материали.

• Не ползвайте повреден акумулатор.

Елементи и прибори за управление

Управления на двигателя

Сравнете допълнителните букви на фигури 1, 2 и3 с приборите за управление на

двигателя в списъка, по-долу:

A. Маркировка на двигателя Модел – Тип – Код

B. Запалителна свещ

C. Шумозаглушител, предпазител на шумозаглушителя (по желание),

искрогасител (ако има такъв)

D. Електрически стартер

E. Нивопоказател

F. Литиево-йонен преносим акумулаторен блок

G. Решетка на отвора за въздух

H. Резервоар за гориво и капачка

I. Въздушен филтър

J. Ръчна газ (ако има такава)

K. Зарядно устройство за акумулаторния блок – преносим акумулатор

L. Кранче за подаване на гориво (ако има такова)

M. Литиево-йонен интегриран акумулаторен блок

N. Кабел и зарядно устройство – интегриран акумулаторен блок

Символи за управление на двигателя и техните

значения

Обороти на двигателя –

БЪРЗИ

Обороти на двигателя –

БАВНИ

Обороти на двигателя –

СПРЕНИ

ВКЛ. – ИЗКЛ.

Стартиране на двигателя

Смукач ЗАТВОРЕН

Стартиране на двигателя

Смукач ОТВОРЕН

Капачка на резервоара за

гориво

Кранче за подаване на

гориво ОТВОРЕНО

Кранче за подаване на

гориво ЗАТВОРЕНО

Ниво на горивото –

Максимално

Не препълвайте

Интегриран акумулаторен блок:

Волт Ампер

Двойно изолиран Променлив ток

Прав ток Продукт от списъка на

Underwriters Laboratories,

Inc., САЩ и Канада

Регистриран продукт на

Underwriters Laboratories,

Inc.

Херц

Акумулаторите

подлежат на

рециклиране съгласно

разпоредбите

Зареждане на

акумулаторния блок

Извадете ключа/акумулаторния блок

Експлоатация

Препоръки за маслото

Вместимост на масло: Вижте разделСпецификации.

ПРЕДУПРЕЖДЕНИЕ

Този двигател се доставя от Briggs & Stratton без масло. Производителите на

оборудването или търговците може да са добавили масло в двигателя. Преди

да стартирате двигателя за първи път, уверете се, че маслото е на правилното

ниво. Добавяйте масло, както е посочено в инструкциите в това ръководство. Ако

стартирате двигателя без масло, той ще се повреди и ремонтът няма да бъде

покрит от гаранцията.

За най-добра производителност препоръчваме да се използват сертифицирани

с гаранция масла на Briggs & Stratton®. Разрешени са и други висококачествени

почистващи масла от клас SF, SG, SH, SJ или по-висок. Не използвайте специални

добавки.

Използвайте таблицата, за да изберете най-добрия вискозитет за очаквания

диапазон на външна температура. Двигателите на по-голяма част от оборудването

с външно захранване работят добре със синтетично масло 5W-30. Синтетичното

масло Vanguard® 15W-50 осигурява най-добрата защита за оборудване, което се

използва при високи температури.

Not for

Reproduction

A SAE30 – Употребата на SAE30 при температури под 40°F (4°C) ще

доведе до трудно стартиране.

B 10W-30– Употребата на 10W-30 при температури над 80°F (27°C) може

да предизвика повишен разход на маслото. Проверявайте често нивото

на маслото.

С 5W-30

D Синтетично масло 5W-30

EСинтетично Vanguard® 15W-50

Проверете нивото на маслото

Преди да проверите или да долеете масло

• Уверете се, че двигателят е разположен хоризонтално.

• Почистете от отпадъци мястото около отвора за наливане на масло.

• Вижте раздел Технически данни относно вместимостта за маслото.

ПРЕДУПРЕЖДЕНИЕ

Този двигател се доставя от Briggs & Stratton без масло. Производителите на

оборудването или търговците може да са добавили масло в двигателя. Преди

да стартирате двигателя за първи път, уверете се, че маслото е на правилното

ниво. Добавяйте масло, както е посочено в инструкциите в това ръководство. Ако

стартирате двигателя без масло, той ще се повреди и ремонтът няма да бъде

покрит от гаранцията.

1. Извадете щеката на нивопоказателя (А, фигура 4) и я почистете с кърпа.

2. Поставете и затегнете щеката на нивопоказателя (A, Фигура 4).

3. Свалете нивопоказателя и проверете нивото на маслото. Уверете се, че

нивото на маслото е до горната част на индикатора за напълване (B, фигура

4) върху щеката.

4. Ако нивото на маслото е ниско, бавно долейте през отвора за моторно масло

(C, Фигура 4). Не добавяйте твърде много масло.

5. Изчакайте една минута и отново проверете нивото на маслото. Уверете се,

че нивото на маслото е добре.

6. Поставете и затегнете щеката на нивопоказателя (A, Фигура 4).

Система за защита от ниско ниво на маслото (ако

има такава)

На някои двигатели е инсталиран сензор за ниско ниво на маслото. Ако маслото

е малко, сензорът ще изведе предупредителна светлина или ще спре двигателя.

Спрете двигателя и следвайте тези стъпки, преди да стартирате двигателя.

• Уверете се, че двигателят е разположен хоризонтално.

• Проврете маслото. Вижте раздел Проверка нивото на маслото.

• Ако нивото на маслото е ниско, добавете необходимото количество масло.

Стартирайте двигателя и се уверете, че не се включва предупредителната

светлина (ако има такава).

• Ако нивото на маслото не е ниско, не стартирайте двигателя. Свържете

се с упълномощен сервизен представител на Briggs & Stratton, за да

отстраните проблема с маслото.

Препоръки за горивото

Горивото трябва да отговаря на следните изисквания:

• Чист, пресен, безоловен бензин.

• Минимум 87октана/87AKI (91RON). За работа при голяма надморска

височина вижте по-долу.

• Позволен е бензин с до 10% съдържание на етанол (бензоспирт).

ПРЕДУПРЕЖДЕНИЕ

Да не се използват неодобрени марки бензини, като E15 и E85. Не смесвайте

масло с бензина и не променяйте двигателя за работа с алтернативни горива.

Използването на неодобрени горива може да доведе до повреда на елементи от

двигателя, чиито ремонт няма да бъде покрит от гаранцията.

За защита на горивната система от образуване на клей и корозия смесете

стабилизатор на гориво без алкохол и етанолов разредител към горивото.

Вижте раздел Съхранение. Всички горива са различни. Ако започнат да

се появяват проблеми със стартирането или производителността, сменете

доставчиците или марката на горивото. Този двигател е сертифициран за работа

с бензин. Системата за контрол на емисиите за карбураторни двигатели е EM

(Модификации на двигателя). Системите за контрол на емисиите за двигатели с

електронно впръскване на горивото са ECM (модул за управление на двигателя),

MPI (многопортово впръскване) и, ако са оборудвани, O2S (кислороден сензор).

Голяма надморска височина

При надморски височини над 5000фута (1524метра), позволеният бензин е

минимум 85октана/85AKI (89RON).

При карбураторни двигатели е необходимо регулиране за големи надморски

височини, за да се запази производителността. Работата без тази настройка ще

доведе до понижена производителност, по-голям разход на гориво и повишени

емисии. Свържете се с упълномощен сервизен представител на Briggs & Stratton

за информация относно регулирането за големи надморски височини. Не се

препоръчва работа на двигателя при надморска височина под 2500 ход (762м) с

направено регулиране за голяма надморска височина.

При двигатели с електронно впръскване на горивото (EFI) не е необходима

настройка за голяма надморска височина.

Доливане на гориво

ПРЕДУПРЕЖДЕНИЕ

Горивото и неговите пари са възпламеними и взривоопасни. Пожар или

експлозия може да доведе до изгаряния или смърт.

Когато добавяте гориво

• Спрете двигателя. Преди да свалите капачката за гориво, изчакайте най-

малко две (2) минути, за да си гарантирате, че двигателят се е охладил.

• Напълнете резервоара за гориво на открито или в помещение с добра

вентилация.

• Не слагайте твърде много гориво в резервоара. За да оставите възможност

за разширение на горивото, не пълнете над долната част на гърлото на

резервоара за гориво.

• Дръжте горивото далече от искри, открити пламъци, пилотни светлини,

топлина и други източници на запалване.

• Често преглеждайте горивопроводите, резервоара за гориво, капачката

на горивото и връзките за наличие на пукнатини или течове. Подменете

повредените части.

• Ако горивото се разлее, изчакайте, докато се изпари преди да стартирате

двигателя.

1. Почистете пространството около капачката на резервоара за гориво от

мръсотия и остатъци. Свалете капачката на резервоара за гориво.

2. Напълнете резервоара за гориво (A, фигура 5) с гориво. Тъй като горивото се

разширява, не пълнете над долната част на гърлото на резервоара (B).

3. Поставете обратно капачката за гориво.

Заредете акумулатора

ПРЕДУПРЕЖДЕНИЕ

Неправилна употреба на акумулатора и зарядното устройство може да

доведе до електрически удар или пожар.

Кога да се зарежда блок акумулатора

• Използвайте само зарядни устройства за акумулатори на Briggs & Stratton.

• Не използвайте зарядно устройство Briggs & Stratton за други типове

акумулатори.

• Поддържайте зарядното устройство на акумулатора сухо. Пазете блок

акумулатора от навлажняване.

• За да намалите риска от повреждане на щепсела и кабела за захранване

с ток, при изключване на зарядното устройство изтеглете щепсела, а не

кабела.

• Не работете със зарядното устройство, ако щепселът или кабелът са

повредени. Кабелът за захранване с ток не може да бъде заменян.

Повредено зарядно устройство трябва да бъде заменено веднага.

• Ако зарядното устройство е повредено, не го използвайте. Зарядното

устройство не се обслужва и трябва да бъде сменено.

• Не разглобявайте и не се опитвайте да поправите зарядното устройство.

• За да предотвратите токов удар, изключете зарядното устройство от

контакта преди да го почистите.

• Не поставяйте предмети върху щепсела на акумулатора. Това ще

предизвика късо съединение в акумулатора.

• Лица или деца с намалени способности (физически, сетивни, умствени) не

трябва да използват зарядното устройство, освен ако не се наблюдават от

възрастен.

Not for

Reproduction

Удължаващ кабел

• Употребата на неподходящ удължаващ кабел може да доведе до риск от

токов удар или пожар. Ако използвате удължаващ кабел, уверете се, че:

1. Щифтовете на щепсела на удължаващия кабел са със същия брой, размер и

форма като тези на щепсела на зарядното устройство;

2. Удължаващият кабел е правилно свързан и е в добро електрическо

състояние; и

3. Размерът на проводника е най-малко 16AWG, за да пропуска номиналния AC

ток на зарядното устройство.

Кога да се зарежда акумулаторът

При първоначално включване на преносим акумулатор – Литиево-йонният

преносим акумулатор се доставя зареден частично. За поддържане на заряда

и предотвратяване на повреда по време на съхранение акумулаторът е

програмиран да премине в „спящ“ режим. За „събуждане“ на акумулатора е

необходимо бързо зареждане в продължение на около десет (10) секунди.

Оставете акумулатора в зарядното устройство, докато се зареди напълно. За

указания за зареждането вижте раздела Как се зарежда акумулаторът.

При необходимост – За да проверите наличния заряд, натиснете бутона до

индикатора на заряда (E, Фигура 6 7). Вижте раздела Индикатор на заряда на

акумулатора.

Съхранение – Ако акумулаторът ще се съхранява за повече от 3 месеца, го

заредете напълно.

Как се зарежда акумулаторът

ЗАБЕЛЕЖКА:Поддържайте зарядното устройство на акумулатора сухо. НЕ

допускайте акумулаторът да се мокри.

1. Свържете зарядното устройство (F, фигура 8 9) към електрически контакт.

2. Преносим акумулатор: Поставете акумулатора (G, фигура 8) плътно

в гнездото за зареждане (F). Ако не светне ЧЕРВЕНИЯТ индикатор за

зареждане, извадете акумулатора и го поставете отново. Уверете се, че

акумулаторът е поставен плътно в отделението за зареждане.

•ЧЕРВЕНИЯТ светодиод (А, Фигура 6) показва, че акумулаторът се зарежда

правилно.

•ЗЕЛЕНИЯТ светодиод (B) показва, че акумулаторът е напълно зареден.

•Мигащ ЧЕРВЕН светодиод (C) показва, че акумулаторът е прекалено

горещ или студен и няма да приеме заряд. Оставете акумулатора свързан.

Когато достигне нормална работна температура, той автоматично ще

започне да се зарежда. За нормалната работна температура вижте

раздела Технически данни.

•Мигащ ЧЕРВЕН/ЗЕЛЕН светодиод (D) показва, че акумулаторът няма

заряд и трябва да го смените.

3. Преносим акумулатор: Акумулаторът се „събужда“ от „спящ“ режим за около

десет (10) секунди.

4. Преносим акумулатор: Разреден докрай акумулатор се зарежда напълно за

около един (1) час. Ако оставите акумулатора в зарядното устройство, той ще

е винаги напълно зареден.

5. Преносим акумулатор: Когато ЗЕЛЕНИЯТ светодиод покаже, че

акумулаторът е напълно зареден, го извадете от зарядното устройство.

6. Вграден акумулатор: Свържете буксата на зарядното устройство (G, Фигура

9)към двигателя.

7. Вграден акумулатор: Разреден докрай акумулатор се зарежда напълно за

около четири (4) часа.

8. Вграден акумулатор: Когато ЗЕЛЕНИЯТ светодиод покаже, че акумулаторът

е напълно зареден, го извадете от зарядното устройство.

9. За да проверите наличния заряд, натиснете бутона до индикатора на заряда

(E, Figure 6 7).Светодиодите (H) показват нивото на заряда в акумулатора.

10. Когато акумулаторът не се използва, откачете зарядното устройство от

електрическия контакт.

раздела за индикатора на заряда на

За да проверите наличния заряд, натиснете бутона до индикатора на заряда (E,

фигура 6 7). Светодиодите (H) показват нивото на заряда в акумулатора.

Светоиндикаторни

светлини

Наличен заряд

Четири светодиода 75% до 100%

Три светодиода 50% до 75%

Два светодиода 25% до 50%

Един светодиод 10% до 25%

Мигане Ниско

Вграден акумулатор: Когато акумулаторът е свързан към зарядното устройство

и няма светещи светодиоди, значи акумулаторът е напълно зареден. Изключете

зарядното устройство.

Стартиране на двигателя

ПРЕДУПРЕЖДЕНИЕ

Неправилна употреба на акумулатора и зарядното устройство може да

доведе до електрически удар или пожар.

Експлоатация

• Поддържайте зарядното устройство на акумулатора сухо. Пазете блок

акумулатора от навлажняване.

• За да намалите риска от електрически удар, не допускайте в щепсела за

AC да прониква вода.

• Не поставяйте предмети върху щепсела на акумулатора. Това ще

предизвика късо съединение в акумулатора.

Кога да се зарежда блок акумулатора

• Използвайте само зарядни устройства за акумулатори на Briggs & Stratton.

• Не използвайте зарядно устройство Briggs & Stratton за други типове

акумулатори.

• Поддържайте зарядното устройство на акумулатора сухо. Пазете блок

акумулатора от навлажняване.

• За да намалите риска от повреждане на щепсела и кабела за захранване

с ток, при изключване на зарядното устройство изтеглете щепсела, а не

кабела.

• Не работете със зарядното устройство, ако щепселът или кабелът са

повредени. Кабелът за захранване с ток не може да бъде заменян.

Повредено зарядно устройство трябва да бъде заменено веднага.

• Ако зарядното устройство е повредено, не го използвайте. Зарядното

устройство не се обслужва и трябва да бъде сменено.

• Не разглобявайте и не се опитвайте да поправите зарядното устройство.

• За да предотвратите токов удар, изключете зарядното устройство от

контакта преди да го почистите.

• Не поставяйте предмети върху щепсела на акумулатора. Това ще

предизвика късо съединение в акумулатора.

• Лица или деца с намалени способности (физически, сетивни, умствени) не

трябва да използват зарядното устройство, освен ако не се наблюдават от

възрастен.

Удължаващ кабел

• Употребата на неподходящ удължаващ кабел може да доведе до риск от

токов удар или пожар. Ако използвате удължаващ кабел, уверете се, че:

1. Щифтовете на щепсела на удължаващия кабел са със същия брой, размер и

форма като тези на щепсела на зарядното устройство;

2. Удължаващият кабел е правилно свързан и е в добро електрическо

състояние; и

3. Размерът на проводника е най-малко 16AWG, за да пропуска номиналния AC

ток на зарядното устройство.

Когато съхранявате блок акумулатора в сервизно помещение

• Поддържайте зарядното устройство на акумулатора сухо. Пазете блок

акумулатора от навлажняване.

Преди да извършвате настройки или поправки

•Модели с преносим блок акумулатор: Свалете блок акумулатора от

отделението за акумулатора.

•Модели с вграден блок акумулатор: Изключете кабела на проводника от

стартера на двигателя.

ПРЕДУПРЕЖДЕНИЕ

Горивото и неговите пари са възпламеними и взривоопасни. Пожар или

експлозия може да доведе до изгаряния или смърт.

Когато стартирате двигателя

• Уверете се, че запалителната свещ, шумозаглушителят, капачката на

резервоара за гориво и въздушният филтър (ако има такива) са монтирани

правилно.

• Не стартирайте двигателя без запалителна свещ.

• Ако двигателят е задавен, поставете смукача (ако има такъв) в положение

ОТВОРЕНО или РАБОТА. Поставете прибора за управление на дроселната

клапа в положение БЪРЗО (ако има такъв) и въртете, докато двигателят

стартира.

• Ако в областта има изтичане на природен газ или газ LP, не стартирайте

двигателя.

• Не използвайте течности за начално запалване под налягане, защото

парите им са възпламеними.

Not for

Reproduction

Sayfa yükleniyor ...

BRIGGS STRATTON 090000 Performance Of Petrol Engines Kullanım kılavuzu

Marka: BRIGGS STRATTON

Model: 090000 Performance Of Petrol Engines

Kategori: Motor

Tip: Kullanım kılavuzu

PDF İndir

rapor

BRIGGS STRATTON 090000 Performance Of Petrol Engines Kullanım kılavuzu

BRIGGS STRATTON 090000 Performance Of Petrol Engines Kullanım kılavuzu

Diğer dillerde

Diğer Belgeler