Yamaha MSP5 El kitabı

Kategori
Hoparlörler
Tip
El kitabı

Bu kılavuz için de uygundur

MONITOR SPEAKER
MSP5
Owner’s manual
Mode d’emploi
Bedienungsanleitung
Manual de instrucciones
VOL
M
• Explanation of Graphical Symbols
The exclamation point within an equilat-
eral triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to
persons.
10. Power Sources — The appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
11. Grounding or Polarization — The precautions that should be
taken so that the grounding or polarization means of an
appliance is not defeated.
12. Power-Cord Protection — Power-supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
13. Cleaning — The appliance should be cleaned only as recom-
mended by the manufacturer.
14. Nonuse Periods — The power cord of the appliance should be
unplugged from the outlet when left unused for a long period
of time.
15. Object and Liquid Entry — Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.
16. Damage Requiring Service — The appliance should be ser-
viced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure dam-
aged.
17. Servicing — The user should not attempt service the appliance
beyond that described in the operating instructions.
SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1. Read Instructions — All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions — The safety and operating instructions
should be retained for future reference.
3. Heed Warnings — All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions — All operating and use instructions
should be followed.
5. Water and Moisture — The appliance should not be used near
water – for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, and
the like.
6. Carts and Stands — The appliance
should be used only with a cart or stand
that is recommended by the manufac-
turer.
6A An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to
overturn.
7. Wall or Ceiling Mounting — The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
8. Ventilation — The appliance should be situated so that its
location or position does not interfere with its proper ventila-
tion. For example, the appliance should not be situated on a
bed, sofa, rug, or similar surface that may block the ventilation
openings; or, placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of air through
the ventilation openings.
9. Heat — The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
The above warning is located on the
bottom or rear of the unit
3
Thank you for purchasing Yamaha MSP5 monitor speaker. The MSP5 features a compact
bass reflex cabinet, with 12 cm two-way cone speaker and 2.5 cm titanium dome speaker.
This powered bi-amplifier speaker system faithfully reproduces sound and can be used for a
wide range of applications, from personal home recordings to serious professional use.
Please read this Owner’s Manual thoroughly to make the best use of the MSP5’s quality
functions for a long period of time.
Precautions
Connect this unit’s power cord only to an AC outlet of the
type stated in this Owner’s Manual or as marked on the unit.
Failure to do so is a fire and electrical shock hazard.
Do not allow water to enter this unit or allow the unit to
become wet. Fire or electrical shock may result.
Do not place heavy objects, including this unit, on top of
the power cord. A damaged power cord is a fire and
electrical shock hazard. In particular, be careful not to place
heavy objects on a power cord covered by a carpet.
Do not place a container with liquid or small metal objects
on top of this unit. Liquid or metal objects inside this unit
are a fire and electrical shock hazard.
Do not scratch, bend, twist, pull, or heat the power cord. A
damaged power cord is a fire and electrical shock hazard.
If lightning begins to occur, turn off the power switch of the
unit as soon as possible, and unplug the power cord plug
from the electrical outlet.
If there is a possibility of lightning, do not touch the power
cable plug if it is still connected. Doing so may be an
electrical shock hazard.
Do not modify the unit. Doing so is a fire and electrical
shock hazard.
Do not remove the unit’s cover. You could receive an
electrical shock. If you think internal inspection, mainte-
nance, or repair is necessary, contact your dealer.
If the power cord is damaged (i.e., cut or a bare wire is
exposed), ask your dealer for a replacement. Using the unit
with a damaged power cord is a fire and electrical shock
hazard.
If you notice any abnormality, such as smoke, odor, or
noise, or if a foreign object or liquid gets inside the unit,
turn it off immediately. Remove the power cord from the AC
outlet. Consult your dealer for repair. Using the unit in this
condition is a fire and electrical shock hazard.
Should this unit be dropped or the cabinet be damaged,
turn the power switch off, remove the power plug from the
AC outlet, and contact your dealer. If you continue using the
unit without heeding this instruction, fire or electrical shock
may result.
Keep this unit away from the following locations:
- Locations exposed to oil splashes or steam, such as near
cooking stoves, humidifiers, etc.
- Unstable surfaces, such as a wobbly table or slope.
- Locations exposed to excessive heat, such as inside a car
with all the windows closed, or places that receive direct
sunlight.
- Locations subject to excessive humidity or dust accumu-
lation.
Do not place the power cord close to a heater. It may melt,
causing fire or electrical shock.
Hold the power cord plug when disconnecting it from an
AC outlet. Never pull the cord. A damaged power cord is a
potential fire and electrical shock hazard.
Do not touch the power plug with wet hands. Doing so is a
potential electrical shock hazard.
To relocate the unit, turn the power switch off, remove the
power plug from the AC outlet, and remove all connecting
cables. Damaged cables may cause fire or electrical shock.
This unit is heavy. Use two or more people to carry it.
Turn off all musical instruments, audio equipment, and
speakers when connecting to this unit. Use the correct
connecting cables and connect as specified.
Always lower the volume control to minimum before
turning on the power to this unit. A sudden blast of sound
may damage your hearing.
Do not output distorted sounds for long periods of time, as
this will cause the speaker to heat up, leading to a fire hazard.
If you know you will not use this unit for a long period of time,
such as when going on vacation, remove the power plug from
the AC outlet. Leaving it connected is a potential fire hazard.
To prevent electrical shock when cleaning the unit, remove
the power plug from the AC outlet.
Magnetic shield type: This speaker is magnetically shielded.
However, if a nearby monitor displays any uneven colors,
place it further away from the monitor.
Using a mobile telephone near this unit may induce noise. If
noise occurs, use the telephone away from the unit.
The rubber feet included in this package can be used to
prevent the device from slipping. Attach these feet to the
unit when you use it on a slippery surface.
You may notice air blowing in and out of the ports on the
device. This is not abnormal. It is more noticeable when you
play a program with an expanded lower range.
Allow a distance of 5 cm between the unit and the wall so
that heat generated from the unit will be released effectively.
Also, allow enough space between the unit and other
devices. Keep a space of 10 cm on the top and the side. If
heat release is inadequate, the unit will retain heat inside
the unit, which may cause a fire.
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying the
terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of
the three pin plug.
* This applies only to products distributed by YAMAHA KEMBLE
MUSIC (U.K.) LTD.
IMPORTANT
Please record the serial number of this unit in the space below.
Serial No.:
The serial number is located on the bottom or rear of the unit.
Retain this Owner's Manual in a safe place for future reference.
4
VOL
21
1 Power indicator
This indicator lights up when you turn the POWER
switch ON.
2 VOL (Volume) control
This control knob enables you to adjust the overall
sound volume. Rotating the control counter
clockwise lowers the volume level. Rotating it
clockwise raises the volume level.
CAUTION
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
2
3
1
NEUTRIK
LINE 1
INPUTTRIM
LINE 2HIGHLOWPOWER
ON
OFF
–2 –1 0 +1 –1 0 +1
3 4 5
3 POWER switch
This switch turns the power to the MSP5 on and
off. When you turn this switch on, the green
power indicator on the front panel lights up.
4 TRIM switches
These switches enable you to adjust the bass and
treble for the MSP5.
LOW: four positions
The LOW switch adjusts the bass range. With the
+1 setting, the bass range is boosted by 1.5 dB.
With the “–1 and “–2 settings, the bass range is
cut by 1.5 dB.
(See performance graph.)
HIGH: three positions
The HIGH switch adjusts the treble. With the +1
setting, the treble range is boosted by 1.5 dB. With
the “–1 setting, the treble range is cut by 1.5 dB.
(See performance graph.)
5 INPUT jacks
LINE 1
This is an XLR-type jack used to connect a bal-
anced.
LINE 2
This is a monaural phone jack used to connect an
unbalanced line output.
Front panel/Rear panel
5
Specifications
General specifications
Type.......................................... Bi-Amp 2-way Bass Reflex Powered Speaker
Crossover Frequency................. 2.5 kHz
Frequency Range ...................... 50 Hz40 kHz
Maximum Output Level............ 101 dB (1 m on Axis)
Dimensiones (W × H × D) ........ 169 × 279 × 222 mm
Weight ...................................... 7.5 kg
Speaker unit
Speaker Unit ............................. LF: 12 cm cone (4 , magnetic shielded)
HF: 2.5 cm titan dome (6 , magnetic shielded)
Enclosure .................................. Type: Bass Reflex
Volume: 6.3 l
Amp.unit
Maximum Output Power .......... LF: 40 W at 400 Hz, THD= 0.02%, RL=4
HF: 27 W at 10 kHz, THD= 0.02%, RL=6
Input Sensitivity/Impedance...... Line 1: +4 dB/10 k (XLR Blanced)
Line 2: 10 dB/10 k (phone Unblanced)
Signal to Noise Ratio ................ 100 dB (A Weighted)
Controls .................................... TRIM switch
LOW: 4 positions (+1.5 dB, 0 dB, 1.5 dB, 3 dB at 60 Hz)
HIGH: 3 positions (+1.5 dB, 0 dB, 1.5 dB at 15 kHz)
Power switch: On/Off
VOL control
Power Indicator ........................ Green LED
Power Requirement .................. USA and Canada: AC120 V, 60 Hz
Europe: AC230 V, 50 Hz
Others: AC240 V, 50 Hz
Power Consumption ................. 60 W
Accessories ............................... Non-skid pads × 2
Specifications and appearance are subject to change without notice.
Dimensions
W: 169
H: 279
171.5
D: 222
20*
7
43.5
110*
Unit: mm* Non-skid pad positions.
6
MSP5 Mode d’emploi
Nous vous remercions davoir porté votre choix sur lenceinte d’écoute Yamaha MSP5. Cette
enceinte comporte un coffret bass reflex avec un haut-parleur conique à deux voies de 12 cm
et un haut-parleur à dôme en titane de 2,5 cm. Ce système actif bi-amplifié reproduit le son
avec une grande fidélité et peut servir à de nombreuses fins, allant des enregistrements à
domicile à un usage professionnel sérieux. Veuillez lire attentivement ce Guide de lutilisa-
teur afin de tirer parti de toutes les possibilités offertes par le MSP5 durant de longues années.
Précautions
Ne branchez le cordon dalimentation de cet appareil qu’à
une prise secteur qui répond aux caractéristiques données
dans ce manuel ou sur lappareil, faute de quoi, il y a risque
dincendie.
Evitez de mouiller lappareil ou de laisser pénétrer de leau
dans son boîtier. Il y a risque dincendie ou d’électrocution.
Ne posez pas dobjets pesants (à commencer par lappareil
lui-même) sur le cordon dalimentation. Un cordon
dalimentation endommagé peut provoquer un incendie ou
une électrocution. Cette précaution est notamment valable
lorsque le cordon dalimentation passe sous un tapis.
Ne posez pas de récipient contenant des liquides ou de
petits objets métalliques sur lappareil. Si un liquide ou des
objets métalliques pénètrent dans lappareil, il y a risque
dincendie ou d’électrocution.
Evitez de griffer, tordre, plier, tirer ou chauffer le cordon
dalimentation. Un cordon dalimentation endommagé
constitue un risque dincendie ou d’électrocution.
En cas dorage, veillez à mettre lunité hors tension dès que
possible et à débrancher le cordon dalimentation de la
prise murale.
En cas dorage avec des risques de foudre, évitez tout
contact avec le cordon dalimentation si ce dernier est
toujours connecté à une prise murale. Vous éviterez ainsi
une électrocution.
Cet appareil ne peut pas être modifié par lutilisateur. Il y a
risque dincendie ou d’électrocution.
Nouvrez jamais le boîtier de cet appareil. Il y a risque
d’électrocution. Si vous pensez que lappareil doit subir une
révision, un entretien ou une réparation, veuillez contacter
votre revendeur.
Si le cordon dalimentation est endommagé (sil est coupé
ou si un fil est à nu), veuillez en demander un nouveau à
votre revendeur. Lutilisation de lappareil avec un cordon
dalimentation endommagé constitue un risque dincendie
ou d’électrocution.
Si vous remarquez un phénomène anormal tel que de la
fumée, une odeur bizarre ou un bourdonnement ou, encore,
si vous avez renversé du liquide ou des petits objets à
lintérieur, mettez lappareil immédiatement hors tension et
débranchez le cordon dalimentation. Consultez votre
revendeur pour faire examiner lappareil. Lutilisation de
lappareil dans ces conditions constitue un risque dincen-
die ou d’électrocution.
Lorsque lappareil tombe ou si le boîtier est endommagé,
coupez lalimentation, débranchez le cordon de la prise
secteur et contactez votre revendeur. Lutilisation de
lappareil dans ces conditions constitue un risque dincen-
die ou d’électrocution.
Evitez de placer lappareil dans les endroits suivants:
- Les endroits soumis à des éclaboussures dhuile ou à de
la vapeur (à proximité de cuisinières, dhumidificateurs,
etc.).
- Des surfaces instables, telles un table mal balancée ou
une surface inclinée.
- Les endroits soumis à une chaleur excessive (à lintérieur
dun véhicule toutes fenêtres fermées) ou en plein soleil.
- Les endroits particulièrement humides ou poussiéreux.
Ne placez jamais le cordon dalimentation à proximité dun
dispositif de chauffage. Il pourrait fondre, ce qui constitue
un risque dincendie ou d’électrocution.
Débranchez toujours le cordon dalimentation en tirant sur
la prise et non sur le câble. Un cordon dalimentation
endommagé constitue un risque dincendie ou d’électrocu-
tion.
Ne touchez pas la prise dalimentation avec des mains
mouillées. Il y a risque d’électrocution.
Avant de changer cet appareil de place, coupez lalimenta-
tion, débranchez le cordon dalimentation de la prise
secteur et débranchez tous les câbles de connexion. Des
câbles endommagés constituent un risque dincendie ou
d’électrocution.
Cet appareil est particulièrement lourd. Il doit être porté par
deux personnes au moins.
Coupez tous les instruments de musique, les appareils audio
et les enceintes avant de les brancher à cet appareil. Utilisez
les câbles de connexion adéquats et branchez-les selon les
consignes données.
Réglez le volume en position minimum avant de mettre cet
appareil sous tension. Une explosion sonore brutale risque
dendommager votre ouïe.
Evitez de reproduire des signaux saturés pendant de longues
périodes. Cela peut provoquer l’échauffement des hauts-
parleurs et éventuellement un incendie.
Si vous pensez ne pas utiliser cet appareil durant une
longue période (si vous partez en vacance, par exemple),
débranchez le cordon dalimentation pour éviter tout risque
dincendie.
Pour éviter toute électrocution durant le nettoyage de
lappareil, débranchez le cordon dalimentation au
préalable.
Avec blindage magnétique: Cette enceinte dispose dun
blindage magnétique. Toutefois, si un écran placé à
proximité affiche des couleurs inégales, éloignez lenceinte.
Lusage dun téléphone mobile à proximité de lappareil
peut provoquer des interférences. Dans ce cas, éloignez le
téléphone mobile.
Les pieds en caoutchouc fournis peuvent être utilisés pour
éviter que le dispositif se mette à glisser. Attachez-les
lorsque vous avez lintention dinstaller le dispositif sur une
surface lisse.
Peut-être remarquerez-vous un souffle dair émanant des
orifices. Il sagit là dun phénomène normal qui se remarque
dautant plus fort que le dispositif contient des fréquences
graves.
Veillez à garder une distance de 5 cm entre lappareil et une
paroi pour que lair dégagé par cet appareil puisse se
dissiper. De plus, veillez à ce que la distance entre cet
appareil et dautres soit suffisamment grande. Laissez un
espace de 10 cm sur le dessus et sur les côtés. Si la chaleur
ne peut pas se dissiper, le manque de ventilation peut
provoquer un incendie.
7
Face avant/Face arrière
VOL
21
1 Témoin de mise sous tension
Ce témoin sallume lorsque linterrupteur POWER
est sur ON.
2 Commande VOL (Volume)
Cette commande vous permet dajuster le volume
global du son. Tournez la commande vers la
gauche pour diminuer le volume et vers la droite
pour laugmenter.
ATTENTION
POUR ÉVITER LES CHOCS ÉLEC-
TRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA
PRISE ET POUSSER JUSQU’AU FOND
2
3
1
NEUTRIK
LINE 1
INPUTTRIM
LINE 2HIGHLOWPOWER
ON
OFF
2 10+1 10+1
3 4 5
3 Interrupteur POWER
Cet interrupteur permet de mettre le MSP5 sous et
hors tension. Lorsquil se trouve en position ON,
le témoin vert en face avant sallume pour indi-
quer que lenceinte est sous tension.
4 Commutateurs TRIM
Ces commutateurs vous permettent de régler le
grave et laigu pour le MSP5.
LOW: quatre positions
Le commutateur LOW permet dajuster le grave.
Avec un réglage +1, la plage du grave est
accentuée de 1,5 dB. Avec des réglages de “–1 et
“–2, le grave est atténué de 1,5 dB et de 3 dB
respectivement.
(Voyez le graphique de performance.)
HIGH: trois positions
Le commutateur HIGH permet dajuster laigu.
Avec un réglage +1, la plage de laigu est
accentuée de 1,5 dB. Avec un réglage de “–1,
laigu est atténué de 1,5 dB.
(Voyez le graphique de performance.)
5 Bornes INPUT
LINE 1
Cette entrée de type XLR permet de brancher une
source ligne symétrique.
LINE 2
Cette entrée de type jack mono permet de bran-
cher une source ligne asymétrique.
Français
8
Fiche technique
Caractéristiques générales
Type.......................................... Enceinte active Bass Reflex bi-amplifiée à deux voies
Fréquence de transfert .............. 2,5 kHz
Bande passante ......................... 50 Hz~40 kHz
Niveau de sortie maximum....... 101dB (1 m dans laxe)
Dimensions (L × H × P)............. 169 × 279 × 222 mm
Poids......................................... 7,5 kg
Section haut-parleur
Haut-parleurs............................ Graves: conique, 12 cm (4 , blindage magnétique)
Aigus: 2,5 cm, dôme en titane (6 , blindage magnétique)
Coffret: ..................................... Type: Bass Reflex
Volume: 6,3 l
Section damplification
Puissance de sortie maximum .. Graves: 40 W à 400 Hz, DHT: 0,02%, charge de 4
Aigus: 27 W à 10 kHz, DHT: 0,02%, charge de 6
Sensibilité dentrée/Impédance . Line 1: +4 dB/10 k (XLR symétrique)
Line 2: 10 dB/10 k (jac k asymétrique)
Rapport signal/bruit .................. 100 dB (pondér ation A)
Commandes ............................. Commutateurs TRIM
Low: 4 positions (+1,5 dB, 0 dB, 1,5 dB, 3 dB à 60 Hz)
High: 3 positions (+1,5 dB, 0 dB, 1,5 dB à 15 kHz)
Interrupteur POWER: On/Off
Commande VOL
Témoin de mise sous tension.... Diode verte
Alimentation ............................. USA et Canada: AC120 V, 60 Hz
Europe: AC230 V, 50 Hz
Autres: AC240 V, 50 Hz
Consommation ......................... 60 W
Accessoires ............................... Pieds anti-dérapage × 2
Les caractéristiques et laspect extérieur peuvent être modifiés sans avis préalable.
Dimensions
L: 169
H: 279
171.5
P: 222
20*
7
43.5
110*
Unité: mm* Position des Pieds anti-dérapage.
9
MSP5 Bedienungsanleitung
Vielen Dank, daß Sie sich für den MSP5 Monitorlautsprecher von Yamaha entschieden
haben. Der MSP5 ist als kompaktes Baßreflexgehäuse mit einem 12 cm-Zweiweg-Kegel-
lautsprecher sowie einer 2,5 cm-Kuppel aus Titan ausgeführt. Dieses aktive Doppel-
verstärkersystem garantiert eine exzellente Klangqualität und empfiehlt sich daher für eine
Vielzahl von Einsatzbereichen, darunter Home Recording und der professionelle Einsatz.
Bitte lesen Sie sich diese Bedienungsanleitung vollständig durch, um bei der Bedienung
Ihres MSP5 alles richtig zu machen und über Jahre hinaus Freude an Ihrer Box haben.
Vorsichtsmaßnahmen
Verbinden Sie das Netzkabel dieses Gerätes ausschließlich
mit einer Netzsteckdose, die den Angaben in dieser
Bedienungsanleitung entspricht. Tun Sie das nicht, so
besteht Brandgefahr.
Vermeiden Sie, daß Wasser oder andere Flüssigkeiten in das
Geräteinnere gelangen. Dann besteht nämlich Schlag- oder
Brandgefahr.
Stellen Sie keine schweren Gegenstände (also auch nicht
dieses Gerät) auf das Netzkabel. Ein beschädigtes Netzkabel
kann nämlich einen Stromschlag oder einen Brand verursa-
chen. Auch wenn das Netzkabel unter dem Teppich verlegt
wird, dürfen Sie keine schweren Gegenstände darauf
stellen.
Stellen Sie keine Behälter mit Flüssigkeiten bzw. legen Sie
keine kleinen Metallgegenstände auf das Gerät. Wenn diese
nämlich in das Geräteinnere gelangen, besteht Brand- oder
Schlaggefahr.
Achten Sie darauf, daß das Netzkabel weder beschädigt,
noch verdreht, gedehnt, erhitzt oder anderweitig beschädigt
wird. Bei Verwendung eines beschädigten Netzkabels
besteht nämlich Brand- oder Schlaggefahr.
Im Falle eines Gewitters sollten Sie das Gerät so schnell wie
möglich ausschalten und den Netzanschluss lösen.
Wenn Sie die Möglichkeit eines Blitzeinschlages besteht,
dürfen Sie auf keinen Fall das Netzkabel berühren, solange
es noch an die Steckdose angeschlossen ist. Sonst besteht
Stromschlaggefahr.
Dieses Gerät darf vom Anwender nicht modifiziert werden.
Dabei bestehen nämlich Brand- und Schlaggefahr.
•Öffnen Sie niemals die Haube dieses Gerätes, um sich nicht
unnötig einem Stromschlag auszusetzen. Wenn Sie vermu-
ten, daß das Gerät nachgesehen, gewartet oder repariert
werden muß, wenden Sie sich bitte an Ihren Händler.
Wenn das Netzkabel beschädigt ist (d.h. wenn eine Ader
blank liegt), bitten Sie ihren Händler um ein neues. Bei
Verwendung dieses Gerätes mit einem beschädigten
Netzkabel bestehen Brand- und Schlaggefahr.
Wenn Ihnen etwas Abnormales auffällt, z.B. Rauch, starker
Geruch oder Brummen bzw. wenn ein Fremdkörper oder
eine Flüssigkeit in das Geräteinnere gelangt, müssen Sie es
sofort ausschalten und den Netzanschluß lösen. Reichen Sie
das Gerät anschließend zur Reparatur ein. Verwenden Sie es
auf keinen Fall weiter, weil dann Brand- und Schlaggefahr
bestehen.
Wenn das Gerät hinfällt bzw. wenn das Gehäuse sichtbare
Schäden aufweist, müssen Sie es sofort ausschalten, den
Netzanschluß lösen und sich an Ihren Händler wenden. Bei
Nichtbeachtung dieses Hinweises bestehen Brand- und
Schlaggefahr.
Stellen Sie das Gerät niemals an einen der folgenden Orte:
- Orte, wo Öl verspritzt wird bzw. wo es zu starker
Kondensbildung kommt, z.B. in der Nähe eines Herdes,
Luftbefeuchtigers usw.
- Unstabile Oberflächen, z.B. einen wackligen Tisch oder
abschüssige Oberflächen.
- Übermäßig heiße Orte, z.B. in einem Auto, dessen Fenster
geschlossen sind oder Orte, die direkter Sonnenein-
strahlung ausgesetzt sind.
- Übermäßig feuchte oder staubige Orte.
Legen Sie das Netzkabel niemals in die Nähe eines
Heizkörpers. Sonst kann es nämlich schmelzen, so daß
Brand und Schlaggefahr bestehen.
Ziehen Sie beim Lösen des Netzanschlusses immer am
Stecker und niemals am Netzkabel. Sonst können nämlich
die Adern reißen, so daß Brand- oder Schlaggefahr besteht.
Berühren Sie das Netzkabel niemals mit feuchten Händen.
Sonst besteht nämlich Schlaggefahr.
Vor dem Transport dieses Gerätes müssen Sie es ausschal-
ten, den Netzanschluß lösen und alle Anschlußkabel
entfernen. Beschädigte Kabel können zu Brand- oder
Schlaggefahr führen.
Dieses Gerät ist besonders schwer. Am besten bitten Sie
jemanden, Ihnen beim Transport zu helfen.
Schalten Sie alle Musikinstrumente, Audiogeräte und Boxen
aus, bevor Sie sie an dieses Gerät anschließen. Verwenden
Sie ausschließlich geeignete Anschlußkabel und befolgen
Sie die Anschlußhinweise.
Stellen Sie die Lautstärke vor Einschalten dieses Gerätes auf
den Mindestwert. Bei plötzlichem Einsetzen sehr lauter
Signale könnte nämlich Ihr Gehör beschädigt werden.
Geben Sie niemals über einen längeren Zeitraum verzerrte
Signale aus. Des kann nämlich zu einer Erhitzung der
Lautsprecher und zu Brand führen.
Wenn Sie dieses Gerät längere Zeit nicht verwenden
möchten, z.B. weil Sie in Urlaub fahren, lösen Sie am besten
den Netzanschluß. Sonst besteht nämlich Brandgefahr.
Um zu vermeiden, daß Sie beim Reinigen des Gerätes einen
Stromschlag bekommen, sollten Sie vorher den Netzan-
schluß lösen.
Magnetisch abgeschirmt: Diese Box ist magnetisch abge-
schirmt. Wenn ein Bildschirm in der Nähe der Box jedoch
Probleme mit der Farbdarstellung hat, sollten Sie die Box
etwas weiter entfernt aufstellen.
Bei Verwendung eines Handys in der Nähe dieses Gerätes
kann es zu Störungen kommen. Am besten verwenden Sie
ein Handy niemals in der Nähe dieses Gerätes.
Die beiliegenden Gummifüße können verwendet werden,
um zu verhindern, dass das Gerät verrutscht. Bringen Sie sie
am Gerät an, wenn Sie es auf einen rutschigen Untergrund
stellen möchten.
Vielleicht merken Sie, dass aus den Öffnungen des Gerätes
Luft entweicht. Das ist nicht abnormal, fällt aber besonders
bei Signalen mit starkem Bassanteil auf.
Lassen Sie einen Abstand von mindestens 5 cm zwischen
diesem Gerät und der Wand, damit die entstehende Wärme
entweichen kann. Außerdem sollten Sie zwischen diesem
und anderen Geräten ebenfalls diesen Mindestabstand
wahren. Lassen Sie oben 10 cm und an den Seiten 10 cm
freil. Bei ungenügender Lüftung kann es zu einem Wärme-
stau kommen, der zu Brandgefahr führen kann.
Deutsch
10
Front-/Rückseite
VOL
21
1 Netzanzeige
Diese Diode leuchtet, wenn sich der POWER-
Schalter in der ON-Position befindet.
2 VOL-Regler (Lautstärke)
Mit diesem Regler können Sie die allgemeine
Lautstärke einstellen. Drehen Sie ihn nach links,
um die Lautstärke zu verringern, und nach rechts,
um sie zu erhöhen.
2
3
1
NEUTRIK
LINE 1
INPUTTRIM
LINE 2HIGHLOWPOWER
ON
OFF
2 10+1 10+1
3 4 5
3 POWER-Schalter
Mit diesem Schalter können Sie den MSP5 ein-
und ausschalten. Ist der MSP5 eingeschaltet,
leuchtet die grüne Netzanzeige auf der Vordersei-
te.
4 TRIM-Schalter
Mit diesen Schaltern können Sie die Baß- und
Höhenwiedergabe des MSP5 einstellen.
LOW: vier Stände
Mit dem LOW-Schalter bestimmen Sie die Baß-
wiedergabe. Die Einstellung +1 bedeutet, daß
die Bässe um 1,5 dB angehoben werden. Die
Einstellung “–1 bzw. “–2 bedeutet, daß die
Bässe um 1,5 dB bzw. 3 dB abgeschwächt wer-
den.
(Siehe auch die Frequenzgrafik).
HIGH: drei Stände
Mit dem HIGH-Schalter können Sie die Höhen-
wiedergabe einstellen. Der Wert +1 bedeutet,
daß die Höhen um 1,5 dB angehoben werden. Bei
Anwahl von “–1 werden die Höhen um 1,5 dB
abgeschwächt.
(Siehe auch die Frequenzgrafik).
5 INPUT-Buchsen
LINE 1
An diese XLR-Buchse kann ein symmetrisches
Line-Signal angeschlossen werden.
LINE 2
Hierbei handelt es sich um eine Klinkenbuchse,
an die Sie eine asymmetrische Line-Signalquelle
anschließen können.
11
Spezifikationen
Allgemeine Spezifikationen
Typ ........................................... Zwei-Wege Doppelverstärker-Aktivlautsprecher in Bass Reflex-Ausführung
Übergangsfrequenz .................. 2,5 kHz
Frequenzgang ........................... 50 Hz~40 kHz
Maximaler Schalldruck ............. 101 dB (1m innerhalb der Achse)
Abmessungen (B × H × T) ......... 169 × 279 × 222 mm
Gewicht.................................... 7,5 kg
Lautsprecherteil
Lautsprecher ............................. Baß: Konus, 12 cm (4 , magnetisc h abgeschirmt)
Höhen: 2,5 cm, Titankuppel (6 , magnetisc h abgeschirmt)
Gehäuse ................................... Typ: Bass Reflex
Volumen: 6,3 l
Verstärkerteil
Maximale Ausgangsleistung...... Baß: 40 W bei 400 Hz, Klirrfaktor: 0,02%, 4 -Last
Höhen: 27 W bei 10 kHz, Klirrfaktor: 0,02%, 6 -Last
Eingangsempfindlichkeit/Impedanz .....Line 1: +4 dB/10 k (symmetrisc he XLR-Buchse)
Line 2: 10 dB/10 k (asymmetrisc he Klinkenbuchse)
Fremdspannungsabstand........... 100 dB (A-Gewic htung)
Bedienelemente ........................ TRIM-Schalter
Low: 4 Stände (+1,5 dB, 0 dB, 1,5 dB, 3 dB bei 60 Hz)
High: 3 Stände (+1,5 dB, 0 dB, 1,5 dB bei 15 kHz)
POWER-Schalter: An/aus
VOL-Regler
Netzanzeige ............................. Grüne Diode
Stromversorgung ....................... USA und Kanada: AC120 V, 60 Hz
Europa: AC230 V, 50 Hz
Audere Länder: AC240 V, 50 Hz
Leistungsaufnahme ................... 60 W
Lieferumfang............................. Gummifüße × 2
Anderungen der technischen Daten und der Ausführung ohne Vorankündigung jederzeit vorbehalten.
Abmessungen
B: 169
H: 279
171.5
T: 222
20*
7
43.5
110*
Einheit: mm* Position der Gummifüße.
12
MSP5 Manual de instrucciones
Muchas gracias por la adquisición del altavoz monitor MSP5 Yamaha. El MSP5 se caracteri-
za por una caja acústica reflectora de graves, con dos altavoces cónicos de dos vías de 12
cm y un altavoz de cúpula de titanio de 2,5 cm. Este sistema de altavoces con doble ampli-
ficador reproduce fielmente el sonido y puede utilizarse para una amplia gama de aplica-
ciones, desde grabaciones personales en su hogar hasta utilización profesional seria. Lea
detenidamente esta guía para el usuario a fin de sacar el máximo partido de las funciones
de calidad de MSP5 durante mucho tiempo.
Precauciones
- Lugares expuestos a calor excesivo, como en el interior
de un automóvil con las ventanillas cerradas, o en sitios
que reciban la luz solar directa.
- Lugares sometidos a humedad o a acumulación excesiva
de polvo.
No coloque el cable de alimentación cerca de un aparato
de calefacción. Si se fundiese, podría producir descargas
eléctricas o un incendio.
Para desconectar el cable de alimentación del
tomacorriente de CA, tire del enchufe. No tire nunca del
propio cable. Un cable de alimentación dañado podría ser
la causa de descargas eléctricas o de un incendio.
No toque nunca el enchufe con las manos desnudas. Si lo
hiciese, podría recibir una descarga eléctrica.
Antes de reubicar la unidad, desconecte su alimentación,
extraiga el enchufe del tomacorriente de CA, y después
desenchufe todos los cables conectores. Los cables dañados
podrían causar el riesgo de descargas eléctricas o de un
incendio.
Esta unidad es pesada. Para transporta, pida ayuda a otra
persona o más.
Antes de conectar la unidad, desconecte todos los instru-
mentos musicales, equipos de audio, y altavoces. Utilice los
cables conectores correctos y conéctelos como está
especificado.
Antes de desconectar la alimentación de la unidad, ponga
el control de volumen al mínimo. La salida repentina del
sonido podría dañar sus oídos.
No reproduzca sonidos distorsionados durante mucho
tiempo, ya que podría sobrecalentar el altavoz y provocar el
riesgo de un incendio.
Cuando no vaya a utilizar esta unidad durante mucho
tiempo, como al ir de vacaciones, desenchufe el cable de
alimentación del tomacorriente de CA. Si lo dejase
conectado, supondría el riesgo de incendio.
Para evitar descargas eléctrica cuando limpie la unidad,
desenchufe el cable de alimentación del tomacorriente de CA.
Tipo sin apantallamiento magnético: Coloque este altavoz a
un metro o más del monitor. De lo contrario, el monitor
podría mostrar colores anormales.
La utilización de un teléfono móvil cerca de esta unidad
puede inducir ruido. Si se produce ruido, utilice el teléfono
alejado de la unidad.
Los topes de goma entregados con este paquete pueden
utilizarse para evitar que el dispositivo se deslice. Coloque
estos topes en la unidad cuando la utilice en una superficie
resbaladiza.
Observará que entra y sale aire de los puertos del dispositi-
vo. Esto es normal. Se nota más cuando toca un programa
con un intervalo menor ampliado.
Deje una distancia de 5 cm entre la unidad y la pared para
que el calor generado por la unidad pueda disiparse
efectivamente. Además, deje espacio suficiente entre la
unidad y otros dispositivos. Deje un espacio de 10 cm sobre
el panel superior, y de 10 cm de los paneles laterales. Si el
calor no se disipa adecuadamente, la unidad lo retendrá, y
es posible que provoque un incendio.
Conecte el cable de alimentación de esta unidad solamente
a un tomacorriente de CA del tipo indicado en este manual
de instrucciones, o marcado en la unidad. Si no lo hiciese,
se podría provocar el riesgo de descargas eléctricas o de un
incendio.
No permita que entre agua dentro de la unidad, ni que ésta
se humedezca. Esto podría resultar en descargas eléctricas.
No coloque objetos pesados, incluyendo esta unidad, sobre
ningún cable de alimentación. Un cable de alimentación
dañado podría provocar el riesgo de descargas eléctricas o
de un incendio. En especial, tenga cuidado de no colocar
objetos pesados sobre un cable de alimentación cubierto
por una alfombra.
No coloque recipientes con líquidos no objetos metálicos
pequeños sobre la unidad. Si dentro de la unidad entrasen
líquidos u objetos metálicos, se podrían producir descargas
eléctricas o un incendio.
No raye, doble, retuerza, tire, ni caliente el cable de
alimentación. Un cable de alimentación dañado podría
causar descargas eléctricas o un incendio.
En caso de que vaya a producirse una tormenta eléctrica,
desconecte la alimentación de la unidad y desenchufe el
cable de alimentación del tomacorriente lo antes posible.
Si existe la posibilidad de que caiga un rayo, no toque el
cable de alimentación si está conectado. Si lo hiciese
podría recibir una descarga eléctrica.
No modifique la unidad. Si lo hiciese, supondría el riesgo
de descargas eléctricas o de un incendio.
No extraiga la cubierta de la unidad. Podría sufrir una
descarga eléctrica. Si cree que su unidad necesita repararse,
póngase en contacto con su proveedor.
Si el cable de alimentación está dañado (es decir, cortado o
con conductores al descubierto), solicite a su proveedor que
se lo reemplace. La utilización de la unidad con el cable de
alimentación dañado podría suponer el riesgo de descargas
eléctricas o de un incendio.
Si nota cualquier anormalidad, como humo, olores, o ruido,
o si algún objeto extraño ha caído dentro de la unidad,
desconecte inmediatamente su alimentación. Desenchufe el
cable de alimentación del tomacorriente de CA. Solicite la
reparación de la unidad a su proveedor. La utilización de la
unidad en estas condiciones podría suponer el riesgo de
descargas eléctricas o de un incendio.
Si esta unidad se han caído, o si la caja se ha dañado,
desconecte la alimentación, desconecte el enchufe de
alimentación del tomacorriente de CA, y póngase en
contacto con su proveedor. Si continuase utilizando la
unidad sin haber tenido en cuente estas instrucciones,
podría recibir descargas eléctricas.
Mantenga esta unidad alejada de los lugares siguientes:
- Lugares expuestos a salpicaduras de aceite o vapor, tales
como cerca de cocinas, humectadores, etc.
- Superficies inestables, como una mesa bamboleante o
inclinada.
13
Panel frontal/posterior
VOL
21
1 Indicador de alimentación
Este indicador se encenderá cuando ponga el
interruptor POWER en ON.
2 Control de volumen (VOL)
Este mando de control le permitirá ajustar el
volumen global del sonido. Si lo gira hacia la
izquirda, el volumen se reducirá, y si lo gira hacia
la derecha, aumentará.
2
3
1
NEUTRIK
LINE 1
INPUTTRIM
LINE 2HIGHLOWPOWER
ON
OFF
2 10+1 10+1
3 4 5
3 Interruptor de alimentación (POWER)
Este interruptor conecta y desconecta la alimenta-
ción del MSP5. Cuando ponga este interruptor en
ON, se encenderá el indicador de alimentación
verde del panel frontal.
4 Selectores de ajuste (TRIM)
Estos interruptores le permitirán ajustar los graves
y los agudos para el MSP5.
LOW: cuatro posiciones
El selector LOW le permitirá ajustar la gama de
graves. Con el ajuste +1, la gama de graves se
reforzará 1,5 dB. Con los ajustes de “–1 y “–2,
la gama de graves se cortará 1,5 dB.
(Consulte el gráfico de operación.)
HIGH: tres posiciones
El selector HIGH le permitirá ajustar la gama de
agudos. Con el ajuste +1, la gama de agudos se
reforzará 1,5 dB. Con los ajustes de “–1, la gama
de agudos se cortará 1,5 dB.
(Consulte el gráfico de operación.)
5 Tomas de entrada (INPUT)
LINE 1
Ésta es una toma de tipo XLR utilizada para
conectar una salida de línea equilibrada.
LINE 2
Ésta es una toma de tipo utilizada para conectar
una salida de línea desequilibrada.
Español
14
Especificaciones
Especificaciones generales
Tipo .......................................... Altavoz con doble amplificador de dos vía, reflector de graves
Frecuencia de cruce ................. 2,5 kHz
Gama de frecuencias ................ 50 Hz~40 kHz
Nivel máximo de salida ............ 101 dB (1 m en eje)
Dimensiones (An × Al × Prf) ..... 169 × 279 × 222 mm
Peso .......................................... 7,5 kg
Unidades altavoces
Unidades altavoces................... Baja frecuencia: cono de 12 cm (4 , magnéticamente apantallada)
Alta frecuencia: cúpula de titanio de 2,5 cm (6 , magnéticamente apantallada)
Caja acústica ............................ Tipo: Reflectora de graves
Volumen: 6,3 l
Unidades amplificadoras
Potencia máxima de salida .......
Baja frecuencia: 40 W a 400 Hz, distorsión armónica total= 0,02%, RL= 4
Alta frecuencia: 27 W a 10 kHz, distorsión armónica total= 0,02%, RL= 6
Sensibilidad/impedancia de entrada ....LINE 1: +4 dB/10 k (toma XLR equilibr ada)
LINE 2: 10 dB/10 k (toma telefónica desequilibr ada)
Relación señal-ruido................. 100 dB (P onderación A)
Controles .................................. Selectores TRIM
LOW: 4 posiciones (+1,5 dB, 0 dB, 1 dB, 3 dB a 60 Hz)
HIGH: 3 posiciones (+1,5 dB, 0 dB, 1,5 dB a 15 kHz)
Interruptor POWER: ON/OFF
Control VOL
Indicador de alimentación ........ LED verde
Alimentación ............................ EE.UU. y Canadá: AC120 V, 60 Hz
Europa: AC230 V, 50 Hz
Otros: AC240 V, 50 Hz
Consumo .................................. 60 W
Accesorios ................................ Patas antideslizables × 2
Las especificaciones y el aspecto están sujetos a cambio sin previo aviso.
Dimensiones
An: 169
Al: 279
171.5
Prf: 222
20*
7
43.5
110*
Unidad: mm* Posiciones de las patas antideslizables.
15
Block Diagram/Schéma/Blockschaltbild/Diagrama en
bloques
HIGHLOW
TRIM
INPUT
TRIM
HF
LF
VOL
LINE 1
LINE 2
Performance graph/Graphique de performance/
Frequenzgrafik/Gráfico de operación
5020
90
100
80
70
60
50
100 200 500 1k 2k 5k 10k 20k 40k
FREQUENCY [Hz]
RESPONSE [dB]
+1
0
1
2
+1
0
1
1 W at 1 kHz / 1 m on Axis
An acoustically-dampened room
YAMAHA CORPORATION
V243540 R2 1 IP 16 Pro Audio & Digital Musical Instrument Division
P.O. Box 3, Hamamatsu, 430-8651, Japan
Printed in Taiwan
1 / 1

Yamaha MSP5 El kitabı

Kategori
Hoparlörler
Tip
El kitabı
Bu kılavuz için de uygundur