Yamaha DM1000 El kitabı

Marka: Yamaha

Model: DM1000

Tip: El kitabı

Bu kılavuz için de uygundur

Using DM1000 Editor

Windows

Getting Started

WindowsKeyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Special Notices

•The software and this owner’s manual are the exclu-

sive copyrights of Yamaha Corporation.

•Copying of the software or reproduction of this man-

ual in whole or in part by any means is expressly for-

bidden without the written consent of the

manufacturer.

•Copying of the commercially available music

sequence data and/or digital audio ﬁles is strictly pro-

hibited except for your personal use.

•Yamaha makes no representations or warranties with

regard to the use of the software and documentation

and cannot be held responsible for the results of the

use of this manual and the software.

•This disc is a CD-ROM. Do not attempt to play the

disc on an audio CD player. Doing so may result in

irreparable damage to your audio CD player.

•The screen displays as illustrated in this owner’s man-

ual are for instructional purposes, and may appear

somewhat different from the screens which appear on

your computer.

•Future upgrades of application and system software

and any changes in speciﬁcations and functions will

be announced separately.

•The company names and product names in this

Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

Yamaha Pro Audio Global Site

http://www.yamahaproaudio.com/

Contents

Getting Started ......................................... 2

Overview of DM1000 Editor ................................ 2

Configuring DM1000 Editor ................................ 2

Synchronizing DM1000 Editor ............................ 4

Offline Edit Function ............................................ 4

Working with Sessions ......................................... 4

Undo/Redo Function ........................................... 5

Other Functions .................................................... 6

Using DM1000 Editor Windows ............... 7

Master Window .................................................... 7

Layer Windows ..................................................... 8

Selected Channel Window ................................. 12

Library Window .................................................. 17

Patch Editor Window ......................................... 19

Surround Editor Window .................................. 24

Timecode Counter Window .............................. 25

Effect Editor Window ......................................... 25

Meter Window .................................................... 27

Keyboard Shortcuts ................................ 28

Index ....................................................... 29

*Speciﬁcations and descriptions in this owner ’s manual

are for information purposes only. Yamaha Corp.

reserves the right to change or modify products or

speciﬁcations at any time without prior notice. Since

speciﬁcations, equipment or options may not be the

same in every locale, please check with your Yamaha

dealer.

Owner’s Manual

DM1000 Editor

Owner’s Manual

Description of menus and buttons

In the event that menu and button names on a Windows system are different from those on a Macintosh, this manual

uses the Windows menu and button names followed by the Macintosh menu and button names in parentheses.

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

Getting Started

Overview of DM1000 Editor

DM1000 Editor enables you to remotely control the Yamaha DM1000 mixing console and to save

the parameter settings on your computer. To use DM1000 Editor, you must ﬁrst perform the fol-

lowing operations:

Start and conﬁgure Studio Manager.

Start and conﬁgure DM1000 Editor.

Synchronize DM1000 Editor with your DM1000 console (see page 4).

For more information on using Studio Manager, refer to the Studio Manager Owner’s Manual.

Conﬁguring DM1000 Editor

You must conﬁgure the following settings for each open Editor.

❏

System Setup

To open the System Setup window, choose [System Setup] from the [File] menu.

Be sure to specify the Input port and Output port.

Input port/Output port:

From the ports you speciﬁed in Studio Manager, select the ports that

the editor will use to communicate with the DM1000 console.

Console Device ID:

DM1000 Editor can control any one of up to eight DM1000 consoles, each

with its own exclusive ID. Select the ID of the console you want to control.

Note:

•Specify MIDI ports in the Setup window of Studio Manager before making the following settings.

•To open each Editor, double-click the icon of the console or device you want to edit.

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

Channel Select:

These options determine whether or not channel selection is linked. When the

PC->Console option is on, selecting a channel in DM1000 Editor selects the same channel on the

console. When the Console->PC option is on, selecting a channel on the console selects the same

channel in DM1000 Editor.

Conﬁrmation:

These options determine whether or not a conﬁrmation dialog box appears

when storing, recalling, or patching.

Layer Select:

These options determine whether or not Layer selection is linked. When the

PC->Console option is on, selecting a Layer in DM1000 Editor selects the same Layer on the con-

sole. When the Console->PC option is on, selecting a Layer on the console selects the same Layer

in DM1000 Editor.

Window Control from Console:

This option determines whether or not using the USER

DEFINED KEYS on the console enables you to remotely open and close the DM1000 Editor win-

dows.

Level Meter:

This option determines whether or not the level meters in DM1000 Editor are

enabled.

❏

Console Setup

To open the Console Setup window, choose [Console Setup] from the [File] menu.

Surround Mode:

Select a Surround mode from STEREO, 3-1, 5.1, and 6.1.

Pair Mode:

These options determine whether the fader pair is Horizontal or Vertical.

Channel Copy Parameter:

Select desired parameters to copy from channel to channel.

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

Synchronizing DM1000 Editor

When DM1000 Editor starts up, the parameter settings on the console and the parameter settings

in DM1000 Editor may be different. Therefore, you must ﬁrst match the parameter settings on the

console with those in DM1000 Editor. This operation is called “synchronization.” Follow the steps

below to synchronize DM1000 Editor.

Select [Synchronize], then [Total

Recall...].

The following window opens.

Select whether you want to transfer

your settings to DM1000 Editor, or vice

versa.

At this time, the All Libs option determines whether or not Scene and Library data is synchronized.

PC -> Console:

Tr ansfers the current parameter settings in DM1000 Editor to your console.

Console -> PC:

Tr ansfers the current parameter settings of your console to the DM1000 Editor.

Click [OK].

Ofﬂine Edit Function

If you do not want to synchronize your console with DM1000 Editor, select [Ofﬂine Edit] from the

[Synchronization] menu. To apply your off-line edits to your console, select [Re-Synchronize]

from the [Synchronization] with the PC->Console option to synchronize the console with

DM1000 Editor.

The Ofﬂine Edit function is also activated when you click the [ONLINE]/[OFFLINE] button in the

Master window.

Working with Sessions

All of your console’s mix settings in DM1000 Editor, including Scene and library data, are called

Sessions. The following table describes how to handle Sessions.

Do not operate the console while synchronization is in progress.

Note:

If you use the “Total Recall” function in Studio Manager, all selected Editors in Studio Manager

are synchronized with the corresponding devices.

Note:

Some effect parameters in the console change their displayed values depending on the sampling

frequency. If you switch DM1000 Editor from OFFLINE to ONLINE, displayed parameter values may

change because DM1000 Editor loads the sampling frequency from the console and updates the dis-

play.

Creating a new Session Choose [New Session] from the [File] menu.

Opening a previously saved Session Choose [Open Session] from the [File] menu.

Saving the current Session Choose [Save Session] from the [File] menu.

Saving the current Session with a new name Choose [Save Session] As from the [File] menu.

Note:

In order to save the current Automix, or the settings of an optional Y56K card, in a Session,

you must ﬁrst resynchronize DM1000 Editor by selecting the Console->PC option.

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

If you save a Session in an Editor, only that Editor’s settings are saved in a ﬁle. The Editor’s settings

are saved in either the Studio Manager V2 format (ﬁle extension “.YSE”) or a format that is com-

patible with earlier versions of Studio Manager (ﬁle extension “.D1X”). Note that earlier versions

of Studio Manager cannot open a Session saved in the “.YSE” format.

If you save a Session in the Studio Manager window, all selected Editor settings are saved in a ﬁle

with a ﬁle extension of “.YSM.”

Undo/Redo Function

In DM1000 Editor, you can cancel the latest operation (Undo) and also cancel the cancellation of

the latest operation (Redo). If you perform an Undo operation twice in a row, you can cancel the

two most-recent operations. If you perform an Undo operation three times in a row, you can can-

cel the three most-recent operations. In this way, you can cancel multiple recent operations. The

following table describes how to use the Undo/Redo function.

Please note, however, that after you perform one of the following operations, you cannot success-

fully undo or redo any previous operation:

•Operations on the console

•Closing Studio Manager

•Changing Surround mode (Stereo/3-1/5.1/6.1)

•Changing Pair mode (Horizontal/vertical)

•Synchronizing the console with DM1000 Editor

•Creating a new Session

•Saving a Session

•Copying and pasting a channel

•Creating or cancelling a channel pair

•Storing or recalling a scene or library

•Turning on or off the GATE: [LINK] button in the Selected Channel window

•Turning on or off the COMPRESSOR: [LINK] button in the Selected Channel window

•Turning on or off the [LINK] button in the Surround Editor window

•Changing Aux Send mode (Fixed/variable) on the console

• Starting automix recording or playback on the console

•Changing the sampling frequency (operated on the device)

•Changing the User Assignable Layer settings (operated on the device)

Undo Choose [Undo] from the [Edit] menu.

Redo Choose [Redo] from the [Edit] menu.

Note:

Yo u cannot Undo or Redo the following operations:

•Edits in the Setup window

•Synchronization

•Opening and closing the windows

•Resizing the windows

Note:

In the Library window, you can Undo or Redo only the most recent operation. You cannot cancel

the preceding operations.

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

Other Functions

❏

Copy & Paste Function

You can copy and paste the channel parameters.

In the Console Setup window (page 3), you can also specify the parameters to be copied.

The following table describes how to use the Copy & Paste function.

❏

Resetting to the default value (Ctrl ( ) + click)

Move the cursor to a control or a parameter value, then hold down the <Ctrl> key ( ) and click

the mouse button to reset the value to the default (e.g., to reset an Input Channel fader to –

∞

, or

reset a pan setting to Center).

❏

Ctrl( )+Shift+Click

Move the cursor to a fader or AUX Send control, then hold down the <Ctrl> key ([ ]) and

<Shift> key and click the mouse button to reset the value to the nominal level.

Copying a channel Right-click (<control>+click) a copy source channel, then choose [Copy].

Pasting a channel

Right-click (<control>+click) the copy destination channel, then choose

[Paste].

DM1000 Editor—Owner’s Manual

Getting Started

Keyboard Shortcuts

Index

Windows

Using DM1000 Editor Windows

Master Window

The Master window enables you to switch between layers and control Stereo Out sig-

nals. To open this window, choose [Master] from the [Windows] menu.

[ONLINE]/[OFFLINE] button

Repeatedly clicking this button toggles between online and ofﬂine status.

This indicator is displayed when DM1000 Editor is connected to the

DM1000 correctly. If the connection is correct, the DM1000 Editor

parameters will work in unison with the DM1000 parameters.

This indicator is displayed when DM1000 Editor is not connected or

is not communicating with the DM1000, or when you have selected

Ofﬂine Edit. If the connection is incomplete, the DM1000 Editor

parameters will not work in unison with the DM1000 parameters.

Meters

These meters display the output level of the

Stereo Out when Surround mode is set to

“STEREO,” or the Bus Outs used for sur-

round processing when Surround mode is

set to 3-1, 5.1 or 6.1. The meters in 3-1, 5.1

and 6.1 Surround modes are shown on the

right.

LAYER buttons

These buttons are used to select the Layers.

PAN CONTROL

These buttons are used to select either

“STEREO” (Stereo display mode) or

“SURR” (Surround display mode). The

Pan control on the Input Channels is a rotary control when “STEREO” is

selected, and a dot on a pan graph when “SURR” is selected. If Surround mode is

set to Stereo, the [SURR] button will be disabled.

Scene number display

This display indicates the currently-recalled scene’s number.

[AUTO] button

This button displays the Automix status of the Stereo Out.

[SELECT] button

This button is used to select the Stereo Out.

[ON] button

This button turns the Stereo Out on and off. It appears orange while the Stereo

Out is on.

Master fader

This is the Stereo Out fader.

Fader value indicator

This indicator indicates the fader position in decibels (dB).

Note: If DM1000 Editor is not connected or is not communicating with the

DM1000, clicking this button will not switch the unit from ofﬂine to online.

3-1 5.1 6.1

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

Layer Windows

The Layer window displays 16 channel strips. You can select a layer using the LAYER buttons in the

Master window. To open the Layer window, choose [Layer] from the [Windows] menu.

❏

Input Channels

Selecting the 1-16, 17-32, or 33-48 button in the Master window displays the corre-

sponding Input Channel strips.

SOURCE parameter

This parameter is used to select an Input source. To select an Input source, click the

parameter and choose from the list that appears.

Routing buttons

These buttons are used to route the Input Channel to the Bus Outs.

[STEREO] button

This button is used to route the Input Channel’s signal to the Stereo Out.

[DIRECT] button

This button turns on and off the Input Channel’s routing to its Direct Out.

Direct Out parameter

This parameter is used to select the Direct Out destination. To select a destination,

click the parameter and choose from the list that appears.

[PHASE] button

This button is used to reverse the signal phase of the channel.

[INSERT] button

This button is used to turn on and off the Input Channel’s Insert.

[GATE] button

This button is used to turn on and off the Input Channel’s Gate.

Gate open/close indicators

These indicators display whether the Gate is open (green) or closed (red).

Gate threshold

This displays the Gate Threshold, which can be set by dragging.

[COMP] button

This button is used to turn on and off the Input Channel’s Compressor.

Compressor curve

This display shows the Compressor’s curve.

[EQ] button

This button is used to turn on and off the Input Channel’s EQ.

EQ curve

This display shows the Equalizer’s curve, which can be set by dragging.

[DELAY] button

This button is used to turn on and off the Input Channel’s Delay function.

Note:

•You can selectively turn on or off some of channel strips by using the [View] menu.

•You can open multiple Layer windows by choosing [Windows] menu -> [Layer] -> [Additional View].

The titles of these windows will indicate [Locked]. Windows that are indicated as [Locked] will not

reﬂect layer changes made on the console or in the Master window. If you want the Layer windows to

reﬂect the changes, right-click each window (Macintosh: <control> + click), then select the desired layer

using the LAYER buttons.

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

P Delay parameter

This parameter is used to set the delay time of the Delay function. Delay times can be

set by dragging.

Q Channel number

This is the channel number. Double-click the channel number to open the Selected

Channel window.

R AUX section

These controls are used to set the levels of the Aux Sends. To set an Aux

Send level, drag its bar or click a point along the length of the bar. To turn

an Aux Send on or off, click its number.

The following table shows how the Aux Send controls appear depending

on the Aux Send On/Off and Pre/Post settings. Aux Sends can be set to

pre-fader or post-fader on the Selected Channel window (see “AUX

SEND section” on page 13).

S Pan/Aux Send display

This display shows the stereo or surround pan position or, while setting an Aux Send,

the Aux Send level in dB.

T PAN control

This control is used to set the Input Channel’s stereo or surround pan position.

When the PAN CONTROL in the Master Window is set to “STEREO,” the Pan con-

trol appears as a rotary control, and when set to “SURR,” the control appears as dot

on a pan graph. The surround pan position can be set by dragging the dot.

U LFE control

When 5.1 or 6.1 Surround mode is selected, this control is used to set the

surround LFE Channel level. It appears when the PAN CONTROL in the

Master Window is set to “SURR.” To set the Channel level, drag the end of

its bar or click a point along the length of the bar.

V [AUTO] button

This button displays the Automix status of the Input Channel.

W [SELECT] button

This button is used to select the Input Channel.

X [SOLO] button

This button solos the Input Channel. It appears orange while the channel is soloed.

Y [ON] button

This button turns the Input Channel on and off. It appears orange while the channel

is on.

Z Short channel name

This is the channel’s short name. To edit the name, click it and type.

a Channel fader and channel meter

This is the Input Channel fader. The channel meter to the right of the fader displays

the Input Channel signal level.

b Fader value indicator

The fader value indicator indicates the fader position in decibels (dB).

Aux Send status Appearance

On or off but no level set Dark blue bar

Off, pre-fader Green bar outline displays level

On, pre-fader Green bar displays level

Off, post-fader Orange bar outline displays level

On, post-fader Orange bar displays level

DM1000 Editor—Owner’s Manual

Getting Started

Keyboard Shortcuts

Index

Windows

❏ Output Channels

When you select the Master LAYER button in the Master window, the Bus Out and

Aux Send channels are displayed. The Aux Send channel appears the same as the Bus

Out channels except that the Bus Out channels feature a [STEREO] button.

A [STEREO] button (Bus Out only)

This button is used to route the Bus Out to the Stereo Out.

B [INSERT] button

This button is used to turn on and off the Bus Out’s Insert.

C [COMP] button

This button is used to turn on and off the Bus Out’s Compressor.

D Compressor curve

This display shows the Compressor’s curve.

E [EQ] button

This button is used to turn on and off the Bus Out’s EQ.

F EQ curve

This display shows the Equalizer’s curve, which can be set by dragging.

G [DELAY] button

This button is used to turn on and off the Bus Out’s Delay function.

H Delay parameter

This parameter is used to set the delay time of the Delay function. Delay times

can be set by dragging.

I Channel number

This is the channel number. Double-click the channel number to open the

Selected Channel window.

J [AUTO] button

This button displays the Automix status of the Bus Out.

K [SELECT] button

This button is used to select the Bus Out.

L [SOLO] button

This button solos the Bus Out. It appears orange while the Bus Out is soloed.

M [ON] button

This button turns the Bus Out on and off. It appears orange while the Bus Out is

on.

N Short channel name

This is the channel’s short name. To edit the name, click it and type.

O Channel fader and channel meter

This is the Bus Out fader. The meter to the right of the fader displays the Bus Out

signal level.

P Fader value indicator

The fader value indicator indicates the fader position in decibels (dB).

DM1000 Editor—Owner’s Manual

Getting Started

Keyboard Shortcuts

Index

Windows

❏ Remote Channels

When you select the REMOTE 1 or REMOTE 2 LAYER button in the Master win-

dow, Remote Channels are displayed.

A Channel number

This is the channel number. Double-click the channel number to open the

Selected Channel window.

B [SELECT] button

This button is used to select the Remote Channel.

C [ON] button

This button turns the Remote Channel on and off. It appears orange while the

channel is on.

D Remote target name

This name indicates the remote target assigned on the DM1000.

E Channel fader

This is the Bus Out’s fader.

F Fader value indicator

This indicator indicates the fader position in the range of 0 through 127.

If the remote target is set to User Assignable Layer:

In this case, the assigned channels are displayed. For more information, refer to

“Input Channels” on page 8 and “Output Channels” on page 10. If the Group Master

Fader is assigned, only the [AUTO], [SOLO], and [ON] buttons and channel faders

are displayed.

Note: When the remote target setting on the DM1000 is set to User Deﬁned, you

can use the [ON] buttons and channel faders to control the functions speciﬁed on

the Remote page.

Note: When the remote target setting on the DM1000 is set to User Deﬁned, you

can use the [ON] buttons and channel faders to control the functions speciﬁed on

the Remote page.

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

Selected Channel Window

The Selected Channel window allows detailed editing of the currently selected channel. To open the

Selected Channel window, choose [Selected Channel] from the [Windows] menu.

There are four variations of the layout of the Selected Channel window, as follows:

•Input Channels (see below)

•Bus Outs (see page 14)

•Aux Sends (see page 15)

•Stereo Outs (see page 16)

❏

Input Channels

CHANNEL SELECT, INPUT PATCH & LIBRARY section

Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. To edit the name, click it and type. The INPUT PATCH parameter is used to select an input

source. To select an input, click the parameter and choose from the list that appears. The [LIBRARY]

button opens the Channel Library window.

GATE section

This section contains the Gate controls and display graph for the currently selected Input Channel.

The rotary controls are used to set the threshold, range, attack, decay, and hold. The GR meter indi-

cates the amount of gain reduction being applied by the Gate. The OUT meter indicates its output

level. The [ON] button turns the Gate on and off. The [LINK] button links the Gate of the currently

selected Input Channel with the Gate of its partner channel. The KEY IN parameter is used to select a

Gate trigger source. The [LIBRARY] button opens the Gate Library window.

Note:

Yo u can open multiple Selected Channel windows by choosing [Windows] menu ->

[Selected Channel] -> [Additional View]. The titles of these windows will indicate

[Locked]. You cannot open Library windows from windows that are indicated as [Locked].

In addition, these windows will not reﬂect the following operations:

• Channel selections made in the Layer window (via the SELECT button)

•Edits in the Surround Editor window

AB DC E F

G H I

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

C EQUALIZER section

This section contains the EQ controls and display graph for the currently selected Input Channel. The

rotary controls are used to set the gain, center frequency, and Q of each band, and the pre-EQ attenuation

level. EQ can also be set by dragging the EQ curve on the EQUALIZER graph. The [ON] button turns the

EQ on and off. The TYPE buttons select the EQ type. The [LIBRARY] button opens the Equalizer Library

window.

D DELAY & PHASE section

This section contains the delay and phase controls for the currently selected Input Channel. The rotary

controls are used to set the delay time, feedback gain, and mix balance (wet/dry balance). The [ON]

button turns the Delay on and off. The [PHASE] button reverses the channel’s signal phase.

E ROUTING, PAN & level section

This section contains the routing, pan, and level controls and the [AUTO], [SOLO], and [ON] buttons

for the currently selected Input Channel. ROUTING buttons 1–8 are used to route the channel to the

Bus Outs. The [STEREO] button routes the channel to the Stereo Out. The [DIRECT] button routes

the channel to its Direct Out, and the Direct Out parameter below it selects a Direct Out destination.

The [F.PAN] button turns on and off the Bus Out Follow Pan function. The PAN control is used to

pan the channel. The [AUTO] button displays the Automix status. The [SOLO] button is used to solo

the channel, the [ON] button, to turn on and off the channel, and the channel fader, to set the channel

level. The meter to the right of the fader indicates the signal level, and the value indicator under the

fader indicates the fader position in decibels (dB).

F AUX SEND section

This section contains the Aux Send controls for the currently selected Input Channel. Use the rotary

controls to set the Aux Send levels, and click them to turn Aux Sends on and off. Use the button below

each Aux Send control to select pre-fader or post-fader. In Fixed mode, this button is used to turn Aux

Sends on and off (the level is ﬁxed at nominal).

When Aux Sends are paired, a heart icon is displayed between them, and the odd-numbered Aux Send

control sets the level, while the even-numbered control works as a pan control.

G INSERT section

This section contains the Insert parameters for the currently selected Input Channel. The [ON] button

turns the Insert on and off. The OUT and IN parameters are used to specify the insert out destination

and insert in source respectively. The POSITION parameter is used to specify the position of the Insert

in the signal path.

H COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Input

Channel. The rotary controls are used to set the threshold, ratio, attack, release, gain, and knee. The

GR meter indicates the amount of gain reduction being applied by the Compressor. The OUT meter

indicates its output level. The [ON] button turns the Compressor on and off. The [LINK] button links

the Compressor of the currently selected Input Channel with the Compressor of its partner channel.

The POSITION parameter is used to specify the position of the Compressor in the signal path. The

ORDER parameter is used to specify the order of the Compressor and Insert when both are inserted

at the same position. The [LIBRARY] button opens the Compressor Library window.

I PAIR, FADER GROUP & MUTE GROUP section

This section contains the Pair, Fader and Mute group functions for the currently selected

Input Channel. Click the heart icon to pair and unpair the channel with its partner chan-

nel. Use the FADER GROUP buttons to add the channel to Fader groups, and use the

MUTE GROUP buttons to add it to Mute groups.

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

❏ Bus Outs

A CHANNEL SELECT section

Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. The [LIBRARY] button opens the Channel Library window.

B EQUALIZER section

This section contains the EQ controls and display graph for the currently selected Bus Out. It’s layout

is identical to the EQUALIZER section for Input Channels. See “EQUALIZER section” on page 13 for

more information.

C DELAY section

This section contains the delay controls for the currently selected Bus Out. The rotary control is used

to set the delay time, and the [ON] button turns the Delay function on and off.

D TO STEREO & level section

This section contains the TO STEREO, pan and level controls and the [AUTO], [SOLO], and [ON] but-

tons for the currently selected Bus Out. The TO STEREO button routes the Bus Out to the Stereo Out,

and the rotary controls are used to set the Bus to Stereo send level and pan. The [AUTO] button displays

the Automix status. The [SOLO] button is used to solo the Bus Out, the [ON] button, to turn the Bus

Out on and off, and the channel fader, to set the Bus Out level. The meter to the right of the fader indi-

cates the signal level, and the value indicator under the fader indicates the fader position in dB.

E INSERT section

This section contains the Insert parameters for the currently selected Bus Out. The [ON] button turns

the Insert on and off. The OUT and IN parameters are used to select the insert out destination and

insert in source respectively. The POSITION parameter is used to specify the position of the Insert in

the signal path.

F COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Bus Out.

Its layout is identical to the COMPRESSOR section for Input Channels. See “COMPRESSOR section”

on page 13 for more information.

G PAIR, FADER GROUP & MUTE GROUP section

This section contains the Pair, Fader and Mute group functions for the currently selected

Bus Out. Click the heart icon to pair and unpair the channel with its partner channel. Use

the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE

GROUP buttons to add it to Mute groups.

ACB D

E F G

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

❏ Aux Sends

A CHANNEL SELECT section

Channels can be selected by clicking the Channel ID and choosing from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. The [LIBRARY] button opens the Channel Library window.

B EQUALIZER section

This section contains the EQ controls and display graph for the currently selected Aux Send. It’s layout

is identical to the EQUALIZER section for Input Channels. See “EQUALIZER section” on page 13 for

more information.

C DELAY section

This section contains the delay controls for the currently selected Aux Send. The rotary control is used

to set the delay time, and the [ON] button turns the Delay function on and off.

D Aux Send level section

This section contains the [AUTO], [SOLO], and [ON] buttons and the channel fader for the currently

selected Aux Send. The meter to the right of the fader indicates the signal level, and the value indicator

under the fader indicates the fader position in decibels (dB).

E INSERT section

This section contains the Insert parameters for the currently selected Aux Send. The [ON] button

turns the Insert on and off. The OUT and IN parameters are used to specify the insert out destination

and insert in source respectively. The POSITION parameter is used to specify the position of the Insert

in the signal path.

F COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Aux Send.

Its layout is identical to the COMPRESSOR section for Input Channels. See “COMPRESSOR section”

on page 13 for more information.

G PAIR, FADER GROUP & MUTE GROUP section

This section contains the Pair, Fader and Mute group functions for the currently selected

Aux Send. Click the heart icon to pair and unpair the channel with its partner channel. Use

the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE

GROUP buttons to add it to Mute groups.

ACB D

E F G

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

❏ Stereo Out

A CHANNEL SELECT section

Channels can be selected by clicking the Channel ID and choosing from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. The [LIBRARY] button opens the Channel Library window.

B EQUALIZER section

This section contains the EQ controls and display graph for the Stereo Out. It’s layout is identical to

the EQUALIZER section for Input Channels. See “EQUALIZER section” on page 13 for more infor-

mation.

C DELAY section

This section contains the delay controls for the Stereo Out. The rotary control is used to set the delay

time, and the [ON] button turns the Delay function on and off.

D Balance & level section

This section contains the balance control, [AUTO] and [ON], and channel fader for the Stereo Out.

The meter to the right of the fader indicates the signal level, and the value indicator under the fader

indicates the fader position in decibels (dB).

E INSERT section

This section contains the Insert parameters for the Stereo Out. The [ON] button turns the Insert on

and off. The OUT and IN parameters are used to specify the insert out destination and insert in source

respectively. The POSITION parameter is used to specify the position of the Insert in the signal path.

F COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Stereo Out.

Its layout is identical to the COMPRESSOR section for Input Channels except there is no [LINK] but-

ton. See “COMPRESSOR section” on page 13 for more information.

G FADER GROUP & MUTE GROUP section

This section contains the Fader and Mute group functions for the Stereo Out. Use the FADER GROUP

buttons to add the Stereo Out to Fader groups, and use the MUTE GROUP buttons to add it to Mute

groups.

ACB D

E F G

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

Library Window

The Library window enables you to control and manage Scenes and libraries. In addition, Scenes and

libraries can be saved to disk on your computer as Library ﬁles.

To open the Library window, choose [Library] from the [Windows] menu. The Library window con-

sists of 9 display pages. You can access each of these pages by clicking the tabs along the top of the win-

dow, or by following the action described below:

The layout of the Library window pages is the same regardless of which page is selected (the Scene

Memory library is shown below). The Library window consists of two panes. The pane on the left,

called the [FILE] section, displays the status of the currently open library ﬁle. The pane on the right,

called the [INTERNAL DATA] section, displays the status of the corresponding library in the console.

You can copy and sort the items in the list (memories) by dragging them between the panes. Within

the same pane, you can copy a memory by dropping it on top of another memory, and you can sort

memories by dropping a memory between two memories. Memory contents can be swapped by hold-

ing down the <Shift> key while dragging. In all cases, the contents of the destination memory are

overwritten. To edit a memory title, click the title, then type.

A File name

This is the ﬁle name of the currently open Library ﬁle.

B [OPEN] button

This button is used to open Library ﬁles.

Library page Action

Channel Library

[LIBRARY] buttons on the Selected Channel window

Gate Library

Compressor Library

Equalizer Library

Input Patch Library

[LIBRARY] button on the Patch Editor window

Output Patch Library

Effect Library [LIBRARY] buttons on the Effect Editor window

Note: DM1000 Editor may be unable to open some ﬁles stored in SmartMedia. In this case, copy those

ﬁles onto a hard disk, then try to open them in DM1000 Editor.

B C D E

G H IL M

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

C [CLOSE] button

This button is used to close the currently open Library ﬁle.

D [SAVE] button

This button is used to save the currently open Library ﬁle.

E [SAVE AS] button

This button is used to save the currently open Library ﬁle with a different name.

F TITLE

This column displays the memory titles.

G PROTECT (only for Scene memories and Automix memories)

This column displays padlock icons for protected memories. It also displays an “ ” (read-only) icon

for preset data.

H INPUT PATCH LINK (only for Scene memories)

This column displays the input patch memory numbers linked to the Scene library. When you store

or recall a Scene memory, the linked Input Patch Library memory is stored or recalled at the same

time.

I OUTPUT PATCH LINK (only for Scene memories)

This column displays the Output Patch memory numbers linked to the Scene library. When you store

or recall a Scene memory, the linked Output Patch Library memory is stored or recalled at the same

time.

J [STORE] button

This button is used to store the contents of the library to the speciﬁed location.

K [RECALL] button

This button is used to recall the selected memory.

L [FILE] section

This section displays the contents of the currently open library ﬁle.

M [INTERNAL DATA] section

This section displays the console’s status of the currently selected library.

N [CLEAR] button

This button clears the selected memory from the list.

O [UNDO] button

This button undoes the last recall, store, copy, clear, sort or titling operation.

P [PROTECT] button (only for Scene memories and Automix memories)

This button is used to protect or unprotect the selected memory.

Note: Yo u cannot store Automix memories during ofﬂine editing.

Note: In the Effect Library page, the number of the internal effect processor to which the store/recall oper-

ation applies is shown above the [STORE] button.

Note: Yo u cannot recall Automix memories during ofﬂine editing.

Note: If the OFFLINE indicator is selected by the [ONLINE]/[OFFLINE] button in the Master window,

DM1000 Editor is not synchronizing with the console. Therefore, this section does not display the console’s

correct status.

Note: In the Library window, you can undo only the most recent operation. You cannot undo any oper-

ations performed prior to the most recent operation.

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

Patch Editor Window

The Patch Editor window is used to patch Inputs, Outputs, Inserts, Effects, and Direct Outs. To open

this window, choose [Patch Editor] from the [Windows] menu. This window consists of ﬁve pages,

which you can select by clicking the tabs along the top of the window.

❏ INPUT PATCH Page

A Channel IDs

These are the Channel IDs.

B Long channel names

These are the Channel long names. To edit a name, click it and type.

C [AUTO SETUP] button

Clicking this button sets the patches on this page to their initial values.

D [ALL CLEAR] button

This button clears all patches on this page.

E [LIBRARY] button

This button opens the Input Patch Library window.

F Port names

These are the Port names. To edit a name, click it and type.

G Patchbay

The patchbay is used to patch input ports to Input Channels. Active patches are indicated by a blue

dot. To make a patch, click a square. To unpatch, click a blue dot.

Note: Yo u can also use the cursor keys and the <ENTER> key on the computer keyboard to make a patch.

Note: Input sources (AD1–AUX8) that are assigned to a cascade connection (CAS BUS1–CASSOLOR)

cannot be assigned to non-cascade-connected channels (CH1–48).

C D E

Using DM1000 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Windows

❏ OUTPUT PATCH Page

A Channel IDs

These are the Channel IDs.

B Long channel names

These are the Channel long names. To edit a name, click it and type.

C [AUTO SETUP] button

Clicking this button sets the patches on this page to their initial values.

D [ALL CLEAR] button

This button clears all patches on this page.

E [LIBRARY] button

This button opens the Output Patch Library window.

F Port names

These are the Port names. To edit a name, click it and type.

G Patchbay

The patchbay enables you to patch output ports to Output Channels. Active patches are indicated by

a red dot. To make a patch, click a square. To unpatch, click a red dot.

Note: Yo u can also use the cursor keys and the <ENTER> key on the computer keyboard to make a patch.

C D E

Sayfa yükleniyor ...

Yamaha DM1000 El kitabı

Marka: Yamaha

Model: DM1000

Tip: El kitabı

Bu kılavuz için de uygundur

PDF İndir

rapor

Diğer dillerde

español: Yamaha DM1000 El manual del propietario
français: Yamaha DM1000 Le manuel du propriétaire
italiano: Yamaha DM1000 Manuale del proprietario
svenska: Yamaha DM1000 Bruksanvisning
čeština: Yamaha DM1000 Návod k obsluze
polski: Yamaha DM1000 Instrukcja obsługi
Deutsch: Yamaha DM1000 Bedienungsanleitung
português: Yamaha DM1000 Manual do proprietário
English: Yamaha DM1000 Owner's manual
dansk: Yamaha DM1000 Brugervejledning
русский: Yamaha DM1000 Инструкция по применению
Nederlands: Yamaha DM1000 de handleiding
română: Yamaha DM1000 Manualul proprietarului

Yamaha DM1000 El kitabı

Bu kılavuz için de uygundur

Yamaha DM1000 El kitabı

Diğer dillerde

İlgili Makaleler