11
EN 3. Check whether the product or individual parts are damaged. If
this is the case, do not use the product. Contact our customer
service.
5 Operation
• Clean all parts of the product before first use as
described in the chapter “Cleaning”.
• The product may emit a slight smell when it is first
used. This is entirely safe and harmless. Ensure there is
adequate ventilation in the room.
• Always hold onto the handle 3 when using the
product.
1. Connect the mains cord 4 to an easily accessible mains
socket.
2. If necessary, attach one of the attachments (concentrator 13
or diuser 14 ) to the air outlet 1 (see Fig. B).
The attachments magnetically fix to the air outlet.
3. To switch the product on, slide the on/o switch 7 to the
middle position (ON).
4. To change the operating temperature, press the temperature
button 6 repeatedly until the desired temperature (39, 55,
65, 75, 85 or 98 °C) is selected.
The operating temperature shows in the temperature
indicator 10 of the display 8.
5. To change the operating speed, press the speed button 5
repeatedly until the desired speed (3 levels) is selected.
One or more speed indicators 11 illuminate to show the
selected speed level (1–3).
6. For a shot of cool air, press and hold the cool shot button 2.
The cool air indicator 9 illuminates when the function is
activated. Release the button to cancel this function.
7. To lock the selected temperature and speed, slide the on/o
switch to the top position ( ).
The lock icon 12 illuminates when the function is activated.
8. To switch the product o, slide the on/o switch to the
bottom position (OFF).
The product remembers the last temperature and speed for
your next use.