LG 55LH545V-TB El kitabı

Please read this manual carefully before operating your set and

retain it for future reference.

Safety and Reference

OWNER’S MANUAL

LED TV*

* LG LED TV applies LCD screen with LED

backlights.

*MFL69309716*

www.lg.com

P/NO : MFL69309716 (1603-REV00)

Printed in Korea

ENGLISH

2

Safety instructions

Please read these safety precautions

carefully before using the product.

WARNING

Do not place the TV and/or remote control in

the following environments:

• A location exposed to direct sunlight

• An area with high humidity such as a

bathroom

• Near any heat source such as stoves and

other devices that produce heat

• Near kitchen counters or humidi ers where

they can easily be exposed to steam or oil

• An area exposed to rain or wind

• Near containers of water such as vases

Otherwise, this may result in  re, electric

shock, malfunction or product deformation.

Do not place the product where it might be

exposed to dust. This may cause a  re hazard.

Mains Plug is the TV connecting/disconnecting

device to AC mains electric supply. This plug

must remain readily attached and operable

when TV is in use.

Do not touch the power plug with wet hands.

Additionally, if the cord pin is wet or covered

with dust, dry the power plug completely or

wipe dust o . You may be electrocuted due to

excess moisture.

Make sure to connect Mains cable to compliant

AC mains socket with Grounded earth pin.

(Except for devices which are not grounded

on earth.) Otherwise possibility you may be

electrocuted or injured.

Insert power cable plug completely into wall

socket otherwise if not secured completely into

socket,  re ignition may break out.

Ensure the power cord does not come into

contact with hot objects such as a heater. This

may cause a  re or an electric shock hazard.

Do not place a heavy object, or the product

itself, on power cables.

Otherwise, this may result in  re or electric

shock.

ENGLISH

3

Bend antenna cable between inside and

outside building to prevent rain from owing

in. This may cause water damaged inside the

Product and could give an electric shock.

When mounting TV onto wall make sure to

neatly install and isolate cabling from rear of

TV as to not create possibility of electric shock /

re hazard.

Do not plug too many electrical devices into a

single multiple electrical outlet. Otherwise, this

may result in re due to over-heating.

Do not drop the product or let it fall over when

connecting external devices. Otherwise, this

may result in injury or damage to the product.

Desiccant

Keep the anti-moisture packing material or

vinyl packing out of the reach of children.

Anti-moisture material is harmful if

swallowed. If swallowed by mistake, force

the patient to vomit and visit the nearest

hospital. Additionally, vinyl packing can cause

suocation. Keep it out of the reach of children.

Do not let your children climb or cling onto the

TV.

Otherwise, the TV may fall over, which may

cause serious injury.

Dispose of used batteries carefully to ensure

that a small child does not consume them.

Please seek Doctor- Medical Attention

immediately if child consumes batteries.

Do not insert any metal objects/conductors

(like a metal chopstick/cutlery/screwdriver)

between power cable plug and input Wall

Socket while it is connected to the input

terminal on the wall. Additionally, do not touch

the power cable right after plugging into the

wall input terminal. You may be electrocuted.

(Depending on model)

Do not put or store inammable substances

near the product. There is a danger of

combustion/explosion or re due to careless

handling of the inammable substances.

ENGLISH

4

Do not drop metallic objects such as coins,

hair pins, chopsticks or wire into the product,

or inammable objects such as paper and

matches. Children must pay particular

attention. Electrical shock, re or injury can

occur. If a foreign object is dropped into the

product, unplug the power cord and contact the

service centre.

Do not spray water on the product or scrub

with an inammable substance (thinner or

benzene). Fire or electric shock accident can

occur.

Do not allow any impact, shock or any objects

to fall into the unit, and do not drop anything

onto the screen. You may be injured or the

product can be damaged.

Never touch this product or antenna during a

thunder or lighting storm.

You may be electrocuted.

Never touch the wall outlet when there is

leakage of gas, open the windows and ventilate.

It may cause a re or a burn by a spark.

Do not disassemble, repair or modify the

product at your own discretion. Fire or electric

shock accident can occur.

Contact the service centre for check, calibration

or repair.

If any of the following occur, unplug the

product immediately and contact your local

service centre.

• The product has been impacted by shock

• The product has been damaged

• Foreign objects have entered the product

• The product produced smoke or a strange

smell

This may result in re or electric shock.

Unplug the TV from AC mains wall socket if you

do not intend to use the TV for a long period of

time. Accumulated dust can cause re hazard

and insulation deterioration can cause electric

leakage/shock/re.

Apparatus shall not be exposed to dripping or

splashing and no objects lled with liquids,

such as vases, shall be placed on the apparatus.

ENGLISH

5

Do not install this product on a wall if it could

be exposed to oil or oil mist. This may damage

the product and cause it to fall.

If water enters or comes into contact with TV,

AC adapter or power cord please disconnect

the power cord and contact service centre

immediately. Otherwise, this may result in

electric shock or re.

Only use an authorized AC adapter and power

cord approved by LG Electronics. Otherwise, this

may result in re, electric shock, malfunction or

product deformation.

Never Disassemble the AC adapter or power

cord. This may result in re or electric shock.

Be careful in handling the adapter to prevent

any external shocks to it. An external shock may

cause damage to the adapter.

Make sure the power cord is connected securely

to the power plug on the TV. (Depending on

model)

CAUTION

Install the product where no radio wave occurs.

There should be enough distance between an

outside antenna and power lines to keep the

former from touching the latter even when the

antenna falls. This may cause an electric shock.

Do not install the product on places such as

unstable shelves or inclined surfaces. Also avoid

places where there is vibration or where the

product cannot be fully supported. Otherwise,

the product may fall or ip over, which may

cause injury or damage to the product.

If you install the TV on a stand, you need to

take actions to prevent the product from

overturning. Otherwise, the product may fall

over, which may cause injury.

If you intend to mount the product to a wall,

attach VESA standard mounting interface

(optional parts) to the back of the product.

When you install the set to use the wall

mounting bracket (optional parts), x it

carefully so as not to drop.

ENGLISH

6

Only use the attachments / accessories specied

by the manufacturer.

When installing the antenna, consult with a

qualied service technician. If not installed by

a qualied technician, this may create a re

hazard or an electric shock hazard.

We recommend that you maintain a distance

of at least 2 to 7 times the diagonal screen size

when watching TV. If you watch TV for a long

period of time, this may cause blurred vision.

Only use the specied type of battery. This

could cause damage to the remote control.

Do not mix new batteries with old batteries.

This may cause the batteries to overheat and

leak.

Batteries should not be exposed to excessive

heat. For example, keep away from direct

Sunlight , open replace and electric heaters.

Do not place non-rechargeable batteries in

charging device.

Make sure there are no objects between the

remote control and its sensor.

Signal from Remote Control can be interrupted

due to external/internal lighting eg Sunlight,

uorescent lighting. If this occurs turn o

lighting or darken viewing area.

When connecting external devices such as

video game consoles, make sure the connecting

cables are long enough. Otherwise, the product

may fall over, which may cause injury or

damage the product.

Do not turn the product On/O by plugging-

in or unplugging the power plug to the wall

outlet. (Do not use the power plug for switch.)

It may cause mechanical failure or could give an

electric shock.

ENGLISH

7

Please follow the installation instructions

below to prevent the product from overheating.

• The distance between the product and the

wall should be more than 10cm.

• Do not install the product in a place with

no ventilation (e.g., on a bookshelf or in a

cupboard).

• Do not install the product on a carpet or

cushion.

• Make sure the air vent is not blocked by a

tablecloth or curtain.

Otherwise, this may result in re.

Take care not to touch the ventilation openings

when watching the TV for long periods as the

ventilation openings may become hot. This

does not aect the operation or performance of

the product.

Periodically examine the cord of your appliance,

and if its appearance indicates damage or

deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with

an exact replacement part by an authorized

servicer.

Prevent dust collecting on the power plug pins

or outlet. This may cause a re hazard.

Protect the power cord from physical or

mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall

outlets, and the point where the cord exits the

appliance.

Do not press strongly upon the panel with a

hand or sharp object such as nail, pencil or pen,

or make a scratch on it, as it may causedamage

to screen.

Avoid touching the screen or holding your

nger(s) against it for long periods of time.

Doing so may produce some temporary or

permanent distortion/damage to screen.

When cleaning the product and its components,

unplug the power rst and wipe it with a soft

cloth. Applying excessive force may cause

scratches or discolouration. Do not spray with

water or wipe with a wet cloth. Never use glass

cleaner, car or industrial shiner, abrasives or

wax, benzene, alcohol etc., which can damage

the product and its panel. Otherwise, this may

result in re, electric shock or product damage

(deformation, corrosion or breakage).

ENGLISH

8

As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if you turn o this unit by SWITCH.

When unplugging the cable, grab the plug and

unplug it, by pulling at the plug.

Don’t pull at the cord to unplug the power

cord from the power board, as this could be

hazardous.

When moving the product, make sure you turn

the power o rst. Then, unplug the power

cables, antenna cables and all connecting

cables.

The TV set or power cord may be damaged,

which may create a re hazard or cause electric

shock.

When moving or unpacking the product,

work in pairs because the product is heavy.

Otherwise, this may result in injury.

Refer all servicing to qualied service

personnel. Servicing is required when the

apparatus has been damaged in any way, such

as power supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

If the product feels cold to the touch, there may

be a small “icker” when it is turned on. This is

normal, there is nothing wrong with product.

This panel is an advanced product that contains

millions of pixels.

You may see tiny black dots

and/or brightly coloured dots (red, blue or green)

at a size of 1ppm on the panel. This does not

indicate a malfunction and does not aect the

performance and reliability of the product.

This phenomenon also occurs in third-party

products and is not subject to exchange or refund.

ENGLISH

9

You may nd dierent brightness and color

of the panel depending on your viewing

position(left/right/top/down).

This phenomenon occurs due to the characteristic

of the panel. It is not related with the product

performance, and it is not malfunction.

Displaying a still image for a prolonged period

of time may cause image sticking. Avoid

displaying a xed image on the TV screen for a

long period of time.

Generated sound

“Cracking” noise: A cracking noise that

occurs when watching or turning o the TV

is generated by plastic thermal contraction

due to tempera-ture and humidity. This

noise is common for products where thermal

deformation is required. Electrical circuit

humming/panel buzzing: A low level noise is

generated from a high-speed switching circuit,

which supplies a large amount of current to

operate a product. It varies depending on the

product.

This generated sound does not aect the

performance and reliability of the product.

Do not use high voltage electrical goods near

the TV (e.g. electric mosquito-swatter). This

may result in product malfunction.

Preparing

NOTE

• Image shown may dier from your TV.

• Your TV’s OSD (On Screen Display) may dier

slightly from that shown in this manual.

• The available menus and options may dier

from the input source or product model that

you are using.

• New features may be added to this TV in the

future.

• The items supplied with your product may

vary depending on the model.

• Product specications or contents of this

manual may be changed without prior

notice due to upgrade of product functions.

• For an optimal connection, HDMI cables

and USB devices should have bezels less

than 10 mm thick and 18 mm width. Use an

extension cable that supports USB 2.0 if the

USB cable or USB memory stick does not t

into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

• Use a certied cable with the HDMI logo

attached.

• If you do not use a certied HDMI cable, the

screen may not display or a connection error

may occur. (Recommended HDMI Cable

Types)

- High-Speed HDMI

®

/

TM

cable (3 m or less)

- High-Speed HDMI

®

/

TM

cable with Ethernet

(3 m or less)

ENGLISH

10

• How to use the ferrite core (Depending on

model)

- Use the ferrite core to reduce the

electromagnetic interference in the power

cord. Wind the power cord on the ferrite

core once.

[Wall side]

[TV side]

10 cm (+ / -2 cm)

CAUTION

• Do not use any unapproved items to ensure

the safety and product life span.

• Any damage or injuries caused by using

unapproved items are not covered by the

warranty.

• Some models have a thin lm attached on

to the screen and this must not be removed.

• When attaching the stand to the TV

set, place the screen facing down on a

cushioned table or at surface to protect

the screen from scratches.

• Make sure that the screws are inserted

correctly and fastened securely. (If they are

not fastened securely enough, the TV may

tilt forward after being installed.) Do not

use too much force and over tighten the

screws; otherwise screw may be damaged

and not tighten correctly.

Lifting and moving

the TV

Please note the following advice to prevent the

TV from being scratched or damaged and for

safe transportation regardless of its type and

size.

• It is recommended to move the TV in

the box or packing material that the TV

originally came in.

• Before moving or lifting the TV, disconnect

the power cord and all cables.

• When holding the TV, the screen should

face away from you to avoid damage.

• Hold the top and bottom of the TV

frame rmly. Make sure not to hold the

transparent part, speaker, or speaker grill

area.

• When transporting a large TV, there should

be at least 2 people.

• When transporting the TV by hand, hold the

TV as shown in the following illustration.

ENGLISH

11

• When transporting the TV, do not expose

the TV to jolts or excessive vibration.

• When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt

towards the left or right.

• Do not apply excessive pressure to cause

exing / bending of frame chassis as it may

damage screen.

• When handling the TV, be careful not to

damage the protruding buttons.

CAUTION

• Avoid touching the screen at all times, as

this may result in damage to the screen.

• Do not move the TV by holding the cable

holders, as the cable holders may break,

and injuries and damage to the TV may

occur.

Using the button

(Depending on model)

You can simply operate the TV functions,

pressing or moving the button.

NOTE

• LH51, LH52 series does not have a Joystick

functions but has only a power On/O

button.

Dome button

or

Joystick button

Basic functions

Power On (Press)

Power O (Press and

hold)

1

Volume Control

Programmes Control

1 If the Menu button is on the screen, pressing

and holding the button will let you exit the

Menu.

Adjusting the menu

When the TV is turned on, press the button

one time. You can adjust the Menu items

pressing or moving the buttons.

Turns the power o.

Clears on-screen displays and returns

to TV viewing.

Changes the input source.

Accesses the settings menu.

ENGLISH

12

Mounting on a table

1 Lift and tilt the TV into its upright position

on a table.

• Leave a 10 cm (minimum) space from the

wall for proper ventilation.

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

• Do not place the TV near or on sources

of heat, as this may result in re or other

damage.

Securing the TV to a wall

(This feature is not available for all models.)

1 Insert and tighten the eye-bolts, or TV

brackets and bolts on the back of the TV.

• If there are bolts inserted at the eye-bolts

position, remove the bolts rst.

2 Mount the wall brackets with the bolts to

the wall.

Match the location of the wall bracket and

the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets

tightly with a sturdy rope. Make sure to keep

the rope horizontal with the at surface.

CAUTION

• Make sure that children do not climb on or

hang on the TV.

NOTE

• Use a platform or cabinet that is strong and

large enough to support the TV securely.

• Brackets, bolts and ropes are not provided.

You can obtain additional accessories from

your local dealer.

Mounting on a wall

Attach an optional wall mount bracket at the

rear of the TV carefully and install the wall

mount bracket on a solid wall perpendicular

to the oor. When you attach the TV to other

building materials, please contact qualied

personnel. LG recommends that wall mounting

be performed by a qualied professional

installer. We recommend the use of LG’s wall

mount bracket. LG’s wall mount bracket is

easy to move with cables connected. When

you do not use LG’s wall mount bracket, please

use a wall mount bracket where the device is

adequately secured to the wall with enough

space to allow connectivity to external devices.

It is advised to connect all the cables before

installing xed wall mounts.

ENGLISH

13

10 cm

Make sure to use screws and wall mount

bracket that meet the VESA standard. Standard

dimensions for the wall mount kits are

described in the following table.

Separate purchase (Wall

mounting bracket)

Model

32/43LH51**

32/43LH52**

32LH53**

43LH54**

49LH51**

49LH52**

49LH54**

VESA (A x B)

(mm)

200 x 200 300 x 300

Standard

screw

M6 M6

Number of

screws

4 4

Wall mount

bracket

LSW240B

MSW240

LSW350B

MSW240

Model 55LH54**

VESA (A x B)

(mm)

400 x 400

Standard

screw

M6

Number of

screws

4

Wall mount

bracket

LSW440B

MSW240

A

B

CAUTION

• Remove the stand before installing the TV

on a wall mount by performing the stand

attachment in reverse.

NOTE

• When installing the wall mounting bracket,

use the adhesive label provided. The

adhesive label will protect the opening

from accumulating dust and dirt. (Only

when the item of the following form is

provided)

Provided item

Adhesive label

• When installing the wall mounting bracket,

it is recommended to cover the stand hole

using tape, in order to prevent the inux of

dust and insects. (Depending on model)

Stand hole

ENGLISH

14

Connections

(notications)

Connect various external devices to the TV and

switch input modes to select an external device.

For more information of external device’s

connection, refer to the manual provided with

each device.

Available external devices are: HD receivers,

DVD players, VCRs, audio systems, USB storage

devices, PC, gaming devices, and other external

devices.

NOTE

• The external device connection may dier

from the model.

• Connect external devices to the TV

regardless of the order of the TV port.

• If you record a TV program on a DVD

recorder or VCR, make sure to connect the

TV signal input cable to the TV through a

DVD recorder or VCR. For more information

of recording, refer to the manual provided

with the connected device.

• Refer to the external equipment’s manual

for operating instructions.

• If you connect a gaming device to the TV,

use the cable supplied with the gaming

device.

• In PC mode, there may be noise associated

with the resolution, vertical pattern,

contrast or brightness. If noise is present,

change the PC output to another resolution,

change the refresh rate to another rate or

adjust the brightness and contrast on the

PICTURE menu until the picture is clear.

• In PC mode, some resolution settings

may not work properly depending on the

graphics card.

Antenna connection

Connect the TV to a wall antenna socket with an

RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal

amplier properly to improve the image

quality.

• If the image quality is poor with an antenna

connected, try to realign the antenna in the

correct direction.

• An antenna cable and converter are not

supplied.

• Supported DTV Audio: MPEG, Dolby Digital,

Dolby Digital Plus, HE-AAC

Adapter connection

(Depending on model)

CAUTION

• Please be sure to connect the TV to the

AC-DC power adapter before connecting the

TV’s power plug to a wall power outlet.

Satellite dish connection

(Only satellite models)

Connect the TV to a satellite dish to a satellite

socket with a satellite RF cable (75 Ω).

ENGLISH

15

CI module connection

(Depending on model)

View the encrypted (pay) services in digital TV

mode.

• Check if the CI module is inserted into the

PCMCIA card slot in the right direction. If

the module is not inserted properly, this can

cause damage to the TV and the PCMCIA

card slot.

• If the TV does not display any video and

audio when CI+ CAM is connected, please

contact to the Terrestrial/Cable/Satellite

Service Operator.

Euro scart connection

(Depending on model)

Transmits the video and audio signals from

an external device to the TV set. Connect the

external device and the TV set with the euro

scart cable.

Output Type

Current

input mode

AV1

(TV Out

1

)

Digital TV Digital TV

Analogue TV, AV

Analogue TVComponent

HDMI

1 TV Out : Outputs Analogue TV or Digital TV

signals.

• Any Euro scart cable used must be signal

shielded.

Other connections

Connect your TV to external devices. For the

best picture and audio quality, connect the

external device and the TV with the HDMI cable.

Some separate cable is not provided.

NOTE

• Supported HDMI Audio format :

Dolby Digital (32 kHz, 44.1 kHz, 48 kHz),

PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192

kHz)

(Depending on model)

Remote control

(Depending on model)

The descriptions in this manual are based on

the buttons on the remote control. Please read

this manual carefully and use the TV correctly.

To replace batteries, open the battery cover,

replace batteries (1.5 V AAA) matching

the

and ends to the label inside the

compartment, and close the battery cover. To

remove the batteries, perform the installation

actions in reverse.

Make sure to point the remote control toward

the remote control sensor on the TV.

ENGLISH

16

A

B

A

(POWER) Turns the TV on or o.

Selects Radio, TV and DTV

programme.

Recalls your preferred subtitle in

digital mode.

By pressing the AD button, audio

descriptions function will be enabled.

Resizes an image.

(INPUT) Changes the input source.

Number buttons Enters numbers.

Accesses the saved programme list.

Returns to the previously viewed

programme.

B

Adjusts the volume level.

Accesses your favourite programme list.

Shows programme guide.

(MUTE) Mutes all sounds.

Scrolls through the saved

programmes.

Moves to the previous or next

screen.

C

D

C

Teletext buttons ( ) These

buttons are used for teletext.

(HOME) Accesses the Home menu.

(Settings) Accesses the settings menu.

Accesses the Quick menus.

Navigation buttons (up/down/left/right)

Scrolls through menus or options.

Selects menus or options and conrms

your input.

Returns to the previous level.

Clears on-screen displays and returns to

TV viewing.

D

Views the information of the current

programme and screen.

Starts to record and displays record

menu. (Only Time Machine

Ready

supported

model) (Depending on model)

Control buttons (

) Controls

media contents.

Coloured buttons These access special

functions in some menus.

(

: Red, : Green, : Yellow, : Blue)

ENGLISH

17

Licenses

Supported licenses may dier by model. For

more information about licenses, visit www.

lg.com.

Manufactured under license from Dolby

Laboratories.

Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Denition

Multimedia Interface, and the HDMI logo are

trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other

countries.

This DivX Certied® device has passed

rigorous testing to ensure it plays DivX® video.

To play purchased DivX movies, rst register

your device at vod.divx.com. Find your

registration code in the DivX VOD section of

your device setup menu.

DivX Certied® to play DivX® video up to HD

1080p, including premium content.

DivX®, DivX Certied® and associated logos

are trademarks of DivX, LLC and are used

under license.

Covered by DivX Patents 7,295,673;

7,515,710; RE45,052; and others available at

[www.divx.com/patents].

Open source

software notice

information

To obtain the source code under GPL, LGPL,

MPL and other open source licenses, that is

contained in this product, please visit http://

opensource.lge.com.

In addition to the source code, all referred

license terms, warranty disclaimers and

copyright notices are available for download.

LG Electronics will also provide open source

code to you on CD-ROM for a charge covering

the cost of performing such distribution (such

as the cost of media, shipping, and handling)

upon email request to opensource@lge.com.

This oer is valid for three (3) years from the

date on which you purchased the product.

Settings

Automatically Setting Up

Programme

(Settings) Programmes Auto

Tuning

Automatically tunes the programmes.

• If Input Source is not connected properly,

programme registration may not work.

• Auto Tuning only nds programmes that

are currently broadcasting.

• If Lock System is turned on, a pop-up

window will appear asking for password.

ENGLISH

18

To select Picture Mode

(Settings) Picture Picture Mode

Settings Picture Mode

Select the picture mode optimized for the

viewing environment or the programme.

• Vivid : Heightens contrast, brightness and

sharpness to display vivid images.

• Standard : Displays images in standard

levels of contrast, brightness and sharpness.

• Eco / APS : [Depending on model]

The Energy Saver feature changes settings

on the TV to reduce power consumption.

• Cinema / Game : Displays the optimum

picture for movie, game.

• Sports : [Depending on model]

Optimizes the video image for high and

dynamic actions by emphasizing primary

colours such as white, grass, or sky blue.

•

Expert 1, 2 : Menu for adjusting

picture quality that allows experts and

amateurs to enjoy the best TV viewing. This

is the adjustment menu provided for ISF-

certied picture tuning professionals. (ISF

logo can only be used on ISF-certied TVs.)

ISFccc: Imaging Science Foundation

Certied Calibration Control

• Depending on input signal, available range

of picture modes may dier.

• Expert mode is for picture tuning

professionals to control and ne-tune using

a specic image. For normal images, the

eects may not be dramatic.

• The ISF function is only available on some

models.

Fine-tuning Picture Mode

(Settings) Picture Picture Mode

Settings

This feature allows you to adjust the selected

picture mode in detail.

• Backlight : Controls the level of screen

brightness by adjusting the backlight. The

closer to 100, the brighter the screen.

• Contrast : Adjusts the contrast of the

bright and dark areas of the picture. The

closer to 100, the higher the contrast.

• Brightness : Adjusts the overall screen

brightness. The closer to 100, the brighter

the screen.

• Sharpness : Adjusts the sharpness of the

image. The closer to 50, the sharper and

clearer the image.

• Colour : Tones down or up the colours

displayed on the screen. The closer to 100,

the deeper the colour.

• Tint : Adjusts the colour balance between

red and green displayed on the screen. The

closer to Red 50, the more red the colour

will be. The closer to Green 50, the more

green the colour will be.

• Colour Temperature : Adjusts the colour

temperature from cold to warm.

• Depending on input signal or other picture

settings, the range of detailed items for

adjustment may dier.

ENGLISH

19

To set advanced controls

(Settings) Picture Picture Mode

Settings Advanced Controls / Expert

Controls

Calibrates the screen for each picture mode; or

adjusts picture settings for a special screen.

• Dynamic Contrast : Adjusts the contrast

to the optimal level according to the

brightness of the image.

• Dynamic Colour : Adjusts colours to make

the image appear in more natural colours.

• Preferred Colour : Adjust the colours

of skin, grass and sky to your personal

preferences.

• Gamma : Sets the gradation curve

according to the output of picture signal in

relation to the input signal.

• Colour Gamut : Selects the range of

colours that can be expressed.

• Edge Enhancer : Shows clearer and

distinctive yet natural edges of the video.

• Colour Filter : Filters a specic colour

spectrum in RGB colours to ne-tune colour

saturation and hue accurately.

• White Balance : Adjusts the overall tone

of the screen as desired.

• Colour Management System : This

is a system that experts use when they

adjust colour with a test pattern. They can

select from six colour areas (Red / Green /

Blue / Cyan / Magenta / Yellow) without

aecting other colours. For normal images,

adjustments may not result in noticeable

colour changes.

• Depending on input signal or other picture

settings, the range of detailed items for

adjustment may dier.

To set additional picture

options

(Settings) Picture Picture Mode

Settings Picture Options

Adjusts detailed setting for images.

• Noise Reduction : Eliminates noise in the

picture.

• MPEG Noise Reduction : Eliminates noise

generated while creating digital picture

signals.

• Black Level : Adjusts the brightness and

contrast of the screen to suit the black level

of the input picture by using the blackness

(black level) of the screen.

• Real Cinema : Optimizes the screen for

movie viewing.

• Motion Eye Care : Automatically adjusts

brightness and reduces image blur based on

image data to reduce eyestrain.

• Depending on input signal or other picture

settings, the range of detailed items for

adjustment may dier.

Resetting picture settings

(Settings) Picture Picture Mode

Settings Picture Reset

Resets picture settings that the user customizes.

Each picture mode is reset. Select the picture

mode you wish to reset.

ENGLISH

20

To use Energy Saving feature

(Settings) Picture

Energy Saving

Reduces power consumption by adjusting

screen brightness.

• Auto : [Depending on model]

The TV sensor detects the ambient lighting

and automatically adjusts the screen

brightness.

• Off : Turns o the Energy Saving mode.

• Minimum / Medium / Maximum :

Applies the pre-set Energy Saving mode.

• Screen Off : Screen is turned o and only

sound is played. Press any button except

Power button on the remote control to turn

the screen back on.

To use Eye Comfort Mode

feature

(Settings) Picture Eye Comfort

Mode

If you turn this option on, colour temperature

will be automatically adjusted to reduce eye

strain.

• On : Automatically adjusts the screen color

temperature.

• Off : Turns o the Eye Comfort Mode.

Selecting Sound Mode

(Settings) Sound Sound Mode

Settings Sound Mode

Adjusts TV audio to an optimal level based on a

selected sound mode.

• Standard : Optimizes the sound for all

types of content.

• Clear Voice : Boosts voice clarity from the

TV.

• Music : [Depending on model] Optimizes

the sound for music.

• Cinema : Optimizes the sound for cinemas.

• Sports : [Depending on model] Optimizes

the sound for sports.

• Game : Optimizes the sound for gameplay.

Adjusting audio balance

(Settings) Sound Sound Mode

Settings Balance

Adjust the volume of the left and right

speakers.

Using the Sound Eect

function

(Settings) Sound Sound Mode

Settings

The user can select various sound eects.

• Virtual Surround : Enjoy an immersive

soundscape with the virtual multi-channel

surround sound eect.

• Equalizer : Set the desired sound by

adjusting the equalizer directly.

• Reset : Reset the sound eect settings.

• This is only available if Sound Mode is set

to Standard.

Sayfa yükleniyor ...

LG 55LH545V-TB El kitabı

Bu kılavuz için de uygundur

LG 55LH545V-TB El kitabı

Diğer dillerde

İlgili Makaleler