Dell PowerVault NX3500 Hızlı başlangıç Kılavuzu

Dell PowerVault NX3500

Systems

Getting Started With

Your System

Začínáme se systémem

Mise en route

Handbuch zum Einstieg

Τα πρώτα βήματα με το σύστημά σας

Rozpoczęcie pracy z systemem

Начало работы с системой

Introducción al sistema

Sisteminizi Kullanmaya Başlarken

Dell PowerVault NX3500

Systems

Getting Started With

Your System

Regulatory Model: E07S Series,

DELL500WLV, and DELL500WHV

Notes, Cautions, Warnings, and Danger

NOTE:

A NOTE indicates important information that helps you make better use of

your computer.

CAUTION:

A CAUTION indicates potential damage to hardware or loss of data if

instructions are not followed.

WARNING:

A WARNING indicates a potential for property damage,

personal injury, or death.

DANGER:

A DANGER indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

____________________

Information in this publication is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

and Eaton Corporation is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, and PowerVault™ are trademarks of Dell Inc.

Intel

®

and Xeon

®

are registered trademarks of Intel Corporation in the U.S. and other countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Regulatory Model: E07S Series, DELL500WLV, and DELL500WHV

January 2011 P/N 9GJH6 Rev. A00

Getting Started With Your System

3

Installation and Configuration

DANGER:

Observe the following instruction to help prevent an imminently

hazardous situation which, if not avoided, will result in death or serious injury:

The backup power supply contains LETHAL VOLTAGES. All repairs and service

should be performed by AUTHORIZED SERVICE PERSONNEL ONLY. There are

NO USER SERVICEABLE PARTS inside the backup power supply.

WARNING:

Before performing the following procedure, review the safety

instructions that came with the system.

Unpacking the Solution

Unpack the solution and identify each item.

Installing the Rails, the System, and the Backup Power Supply in a Rack

Assemble the rails and install the system and backup power supply (BPS) in the

rack. Follow the safety instructions and the rack installation instructions

provided with the solution.

4

Getting Started With Your System

Connecting the Battery in the BPS Power Module

Removing the Power Module Front Cover

On the right side of the front cover, slide the latch to the left to retract the latch

hook. This hook secures the front cover to the right side of the chassis. Pull the

right side of the front cover from the chassis. Slide the front cover to the right to

disengage the hook. This hook secures the front cover to the left side of the chassis.

Getting Started With Your System

5

Removing the Battery

Pull the battery out of the power module.

Rotating the Battery

Rotate the battery 180° so the blind mate connector faces toward the back of

the power module chassis.

NOTE:

Ensure that the arrow on the yellow label is pointing up.

6

Getting Started With Your System

Reinserting the Battery

Align the battery with the power module and reinsert the battery. Ensure that

the battery is fully seated in the power module. If the battery is not fully

inserted into the power module, the battery front cover will not close properly.

NOTE:

Always connect the battery pack before connecting the power cable.

NOTE:

You will not observe the blind mate connectors as they plug into the

receptacle in the back of the power module, but a small amount of arcing may

occur when connecting the battery pack. This is normal and does not damage the

unit or present any safety concern.

Getting Started With Your System

7

Securing the Power Module Front Cover

WARNING:

For safety, always attach the power module front cover as soon as the

battery pack is inserted and connected.

WARNING:

Align the front cover carefully before securing it to the power

module. For safety, do not allow the power module front cover to come in contact

with the battery pack.

On the left side of the first front cover, insert the hook into the open slot on the

left side of the chassis. On the right side of the front cover, slide the latch to the

left to retract the latch hook. Push the right side of the front cover forward to

the chassis. Release the latch to set the hook into the open slot on the right side

of the chassis.

8

Getting Started With Your System

Inserting the Power Modules

Insert the power modules into the chassis module bay with the back panels

toward the back of the chassis.

Getting Started With Your System

9

Cabling the Solution

Cable the solution as shown in the illustration.

PowerVault NX3500 system

Backup power supply

To power source 1

To power source 2

To power source 1

To power source 2

10

Getting Started With Your System

Connecting the Power Cable(s)

Connect the system’s power cable(s) to the system.

CAUTION:

Both the 120 V (LV) and the 230 V (HV) power modules provide IEC 320

C-13 output receptacles. Only use a power cord rated for the input power source

rating labeled next to the input connector on the power module back panel.

CAUTION:

You must always verify the voltage rating of the BPS. Connecting a 230

Vac into a 120 V BPS will damage the BPS.

Open the spring-loaded interlock cover for the input connector and connect the

power cable to the BPS.

Getting Started With Your System

11

Securing the Power Cable(s)

Bend the system power cable(s) into a loop as shown in the illustration and

secure the cables to the brackets using the provided strap. Plug the other end of

one power cable to a grounded electrical outlet and the other cable to the BPS.

For more information, see "Cabling the Solution" on page 9.

Secure the power cable connected to the BPS as shown in the illustration.

12

Getting Started With Your System

Turning On the Solution

Turn on the components in the following order:

1

The BPS

2

The PowerVault NX3500 systems

Installing the Optional Bezel

Install the bezel for the system (optional).

Getting Started With Your System

13

Install the bezel for the BPS (optional).

Other Information You May Need

WARNING:

See the safety and regulatory information that shipped with

your system. Warranty information may be included within this document or

as a separate document.

• The rack documentation included with your rack solution describes how to

install your system into a rack.

• The cable management arm instructions included with your rack solution

describes how to install the cable management arm into a rack.

• The

Hardware Owner’s Manual

provides information about system

features and describes how to troubleshoot the system and install or

replace system components. This document is available online at

support.dell.com/manuals

.

• Any media that ships with your system that provides documentation and

tools for configuring and managing your system, including those

pertaining to the operating system, system management software, system

updates, and system components that you purchased with your system.

NOTE:

Always check for updates on support.dell.com/manuals and read the

updates first because they often supersede information in other documents.

14

Getting Started With Your System

Obtaining Technical Assistance

If you do not understand a procedure in this guide or if the system does not

perform as expected, see your

Hardware Owner’s Manual

. Dell offers

comprehensive hardware training and certification. See

dell.com/training

for

more information. This service may not be offered in all locations.

NOM Information (Mexico Only)

The following information is provided on the device described in this document

in compliance with the requirements of the official Mexican standards (NOM):

Technical Specifications

PowerVault NX3500 System Specifications

Importer:

Model Number Supply Voltage Frequency Current Consumption

E07S 100–240 V CA 50/60 Hz 5.2–2.6 A

DELL500WLV 100–140 V CA 50/60 Hz 15 A

DELL500WHV 200–250 V CA 50/60 Hz 10 A

Processor

Processor type Intel Xeon processor 3400 series

Expansion Bus

Bus type PCI Express Generation 2

Expansion slots One x16 half-length slot

One x8 half-length slot

NOTE:

Both the slots support x8 routing.

Getting Started With Your System

15

Memory

Architecture 1333-MHz registered parity and non registered

DDR-III memory modules

Memory module sockets Six 240-pin

Memory module capacities 2 GB

Maximum RAM 12 GB

Drives

Hard drives Two 3.5" hot-swappable SATA drives

Optical drive One internal slimline SATA DVD-ROM

NOTE:

DVD devices are data only.

Connectors

Back

NIC

Two RJ-45 (for integrated 1-GB NICs)

Serial

9-pin, DTE, 16550-compatible

USB

Two 4-pin, USB 2.0-compliant

Video

15-pin VGA

Front

Video

15-pin VGA

USB

Two 4-pin, USB 2.0-compliant

Internal

USB

Two 4-pin, USB 2.0-compliant

Video

Video type Matrox G200, integrated in BMC

Video memory 8 MB graphics memory

16

Getting Started With Your System

Power

AC power supply (per power supply)

Wa tt ag e

400 W

Voltage

100–240 VAC, 50/60 Hz

Heat dissipation

1666 BTU/hr maximum

Maximum inrush current

Under typical line conditions and over the entire

system ambient operating range, the inrush

current may reach 25 A per power supply for

10 ms or less.

Batteries

System battery

CR 2032 3.0-V lithium coin cell

Physical

Height 4.29 cm (1.69 in)

Width 43.4 cm (17.09 in)

Depth 61.26 cm (24.12 in)

Weight (maximum configuration) 15 kg (33.02 lbs)

Weight (empty configuration) 5.96 kg (13.12 lbs)

Environmental

NOTE:

For additional information about environmental measurements for specific

system configurations, see dell.com/environmental_datasheets.

Tem perat ure

Operating

10 °C to 35 °C (50 °F to 95 °F) with a maximum

temperature gradation of 10 °C per hour

NOTE:

For altitudes above 2950 feet, the maximum

operating temperature is derated 1 ºF/550 ft.

Storage

–40 °C to 65 °C (–40 °F to 149 °F) with

a maximum temperature gradation of

20 °C per hour

Getting Started With Your System

17

Backup Power Supply Specifications

Relative humidity

Operating

8% to 85% (noncondensing) with a maximum

humidity gradation of 10% per hour

Storage

5% to 95% (noncondensing)

Maximum vibration

Operating

0.25 G at 3–200 Hz for 15 min

Storage

0.5 G at 3–200 Hz for 15 min

Maximum shock

Operating

One shock pulse in the positive z axis (one pulse

on each side of the system) of 31 G for 2.6 ms

in the operational orientation

Storage

Six consecutively executed shock pulses in

the positive and negative x, y, and z axes

(one pulse on each side of the system) of 71 G

for up to 2 ms

Altitude

Operating

–16 to 3048 m (–50 to 10,000 ft)

NOTE:

For altitudes above 2950 feet, the maximum

operating temperature is derated 1ºF/550 ft.

Storage

–16 to 10,600 m (–50 to 35,000 ft)

Airborne Contaminant Level

Class

G1 as defined by ISA-S71.04-1985

BPS Model List

120 V Model Dell BPS 500 W (LV)

230 V Model Dell BPS 500 W (HV)

Environmental (continued)

18

Getting Started With Your System

Physical (120 V and 230 V Models)

Dimensions (Width x Height x

Depth)

434 mm x 42 mm x 723 mm (1.4 in x 0.1 in x

2.4 in)

NOTE:

Bezel depth 33 mm (0.1 in) not included.

Rack Unit Size 1 U

Weight 30.0 kg (66.1 lb)

Electrical Input

Nominal Voltage

120 V Model

120 V

230 V Model

230 V

Nominal Voltage Range

120 V Model

90–140 V

230 V Model

180–264 V

Nominal Frequency

120 V and 230 V Models

50/60 Hz auto-sensing, ±3 Hz

Efficiency (Normal Mode)

120 V and 230 V Models

> 96%

Noise Filtering

120 V and 230 V Models

Full-time EMI/RFI filtering

Connections

120 V and 230 V Models

IEC 320-C14, 15 A for UL/CSA, otherwise 10 A

Electrical Output

Power Levels (Rated at Nominal Inputs)

120 V and 230 V Models

500 W

Regulation (Normal mode)

120 V Model

88–140 V

230 V Model

176–264 V

Sayfa yükleniyor...

Dell PowerVault NX3500 Hızlı başlangıç Kılavuzu

Dell PowerVault NX3500 Hızlı başlangıç Kılavuzu

diğer dillerde

İlgili makaleler

Dell PowerVault NX3500 Hızlı başlangıç ​​Kılavuzu

Dell PowerVault NX3500 Hızlı başlangıç ​​Kılavuzu

diğer dillerde

İlgili makaleler

Dell PowerVault NX3500 Hızlı başlangıç Kılavuzu

Dell PowerVault NX3500 Hızlı başlangıç Kılavuzu