Yamaha KX-W421 El kitabı

KX-W421

KX-W321

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DELL’UTENTE

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

Natural Sound Stereo Cassette Deck

Platine à cassette stéréo de la série “Natural Sound”

“Natural Sound” Stereo-Doppelkassettengerät

Natural Sound stereokassettdäck

Registratore a cassette stereo a suono naturale

Magnetófono estéreo de sonido natural

Stereo-cassettedeck voor een “natuurlijk geluid”

NATURAL SOUND CASSETTE DECK KX-W421

DOLBY NR

OFF/ B/ C

REC LEVELBALANCEPLAY TRIM

PHONES

STANDBY/ON

MODE

O / p / ∏ / RELAY

PLAYBACK

DECK A

L R MIN MAX

—+

CLOSE % % CLOSE

DIRECTION RESETRESET DIRECTION

! ⁄

&

SEARCH

!⁄

&

MUTE/SEARCH

PLAYPLAY

REC/PAUSE

EJECT EJECT

NORMAL HIGH

DUBBING A # B

00

NATURAL SOUND CASSETTE DECK KX-W321

DOLBY NR

OFF/ B/ C

REC LEVEL

PHONES

STANDBY/ON

MODE

O / p / ∏ / RELAY

PLAYBACK

DECK A

RECORD/PLAYBACK

DECK B

MIN MAX

RECORD/PLAYBACK

DECK B

DIRECTION RESETRESET DIRECTION

! ⁄

&

SEARCH

!⁄

&

MUTE/SEARCH

REC/PAUSE

EJECT EJECT

NORMAL HIGH

DUBBING A # B

CLOSE % % CLOSE

PLAYPLAY

B G R T

2

NOTE:

Please check the copyright laws in your country to

record from records, compact discs, radio, etc.

Recording of copyright material may infringe copyright

laws.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

This unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off. This state is called the standby

mode. In this state, this unit is designed to consume a

very small quantity of power.

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

Note: The plug severed from the mains lead must be

destroyed, as a plug with bared flexible cord is hazardous if

engaged in a live socket outlet.

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug, proceed

as follows: The wire which is coloured BLUE must be

connected to the terminal which is marked with the letter

N or coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

FOR CANADIAN CUSTOMERS

TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT AND FULLY

INSERT.

THIS CLASS B DIGITAL APPARATUS MEETS ALL

REQUIREMENTS OF THE CANADIAN

INTERFERENCE-CAUSING EQUIPMENT

REGULATIONS.

1. This unit is a sophisticated stereo cassette deck. To

ensure proper operation for the best possible

performance, please read this manual carefully.

2. Choose the installation location of your unit carefully.

Avoid placing it in direct sunlight or close to source of

heat. Also avoid locations subject to vibration and

excessive dust, heat, cold or moisture. Keep it away

from sources of hum such as transformers or motors.

3. Do not open the cabinet as this may result in damage

to the deck or electrical shock. If a foreign object

should get into the deck, contact your local dealer.

4. When removing the power plug from the wall outlet,

always pull directly on the plug; never pull the cord

itself.

5. Do not apply excessive force when operating

switches and knobs.

6. When moving the deck, be sure to first pull out the

power plug and remove all cords connecting the deck

to other equipments.

7. Do not attempt to clean this unit with chemical

solvents as this may damage the finish. Use a clean,

dry cloth.

8. Never allow metallic items (e.g. screwdrivers, tools,

etc.) to come near the record/playback head

assembly. Doing so may not only scratch or damage

the head’s mirror-smooth finish, but also change the

magnetic characteristics of the heads, causing a

deterioration in reproduction quality.

9. Although the record/playback head used in this unit

is a high quality head with outstanding reproduction

characteristics, it can become dirty through the use

of old tapes or from dust accumulation over time.

This can have a serious effect on reproduction

quality. Clean the heads regularly with one of the

commonly available head cleaners or with cleaning

solutions as explained later in this manual.

10. Be sure to read the “TROUBLESHOOTING” section

of this manual for advice on common operating errors

before concluding that your unit is faulty.

11. Keep this manual in a safe place for future reference.

12. Voltage Selector (General and China Model only)

The voltage selector on the rear panel of this unit

must be set for your local mains voltage BEFORE

plugging in the AC mains supply. (Voltage

selector adjustable between 110/120/220/240 V

AC.)

Thank you for purchasing this YAMAHA stereo cassette deck.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

3

ENGLISHFRANÇAISDEUTSCHSVENSKAITALIANOESPAÑOLDUTCH

TABLE OF CONTENTS

FEATURES ......................................................................... 3

CONNECTIONS.................................................................. 4

NOTES ON THIS MANUAL ................................................ 4

PLAYBACK (Common to DECKs A and B)......................... 5

BASIC OPERATION........................................................ 5

SELECTION SEARCH .................................................... 7

RELAY PLAYBACK ......................................................... 8

PLAY TRIM CONTROL ADJUSTMENT (KX-W421 only) 8

RECORDING ...................................................................... 9

BASIC OPERATION........................................................ 9

REC MUTE OPERATION.............................................. 11

REC RETURN OPERATION ......................................... 11

DUBBING (From DECK A to DECK B) ............................. 12

CASSETTE TAPES .......................................................... 13

MAINTENANCE ................................................................ 14

OPTIONAL REMOTE CONTROL TRANSMITTER .......... 14

TROUBLESHOOTING ...................................................... 15

SPECIFICATIONS ............................................................ 16

FEATURES

÷ High Quality Hard Permalloy Recording/Playback Head in

Deck B and Playback Head in Deck A

÷ Dolby B/C Noise Reduction

÷ Play Trim Control for improved playback compatibility with

other decks (KX-W421 only)

÷ Auto Tape Selector

÷ Dolby HX Pro Dynamic Bias Servo (KX-W421 only)

÷ Relay Playback from DECK A to DECK B

÷ Selection Search

÷ Recording Mute Function

÷ Rec Return Operation

÷ Easy Dubbing Operation at Selectable Speed (Normal/

High)

÷ Peak Level Meters with Peak Hold Function

÷ Remote Control Capability with Optional Remote Control

Transmitter

Dolby noise reduction and HX Pro headroom extension

manufactured under license from Dolby Laboratories

Licensing Corporation. HX Pro originated by Bang &

Olufsen.

“DOLBY”, the double-D symbol

and “HX PRO” are

trademarks of Dolby Laboratories Licensing Corporation.

4

PLAY

LINE IN-LINE OUT

L

R

TAPE PBREC OUT

L

R

3

REC

4

CONNECTIONS

To an AC outlet

NOTES ON THIS MANUAL

In this manual, the main operation buttons of the front panel are indicated based on DECK B when the operation is common to

both DECKs A and B. Since the locations of the buttons of DECK A and DECK B are the same, you can easily find the desired

button even when operating DECK A. This manual covers two models. In most cases, however, only model KX-W421 is shown

in the example illustrations.

Example: KX-W421

Main operation buttons of DECK A

Main operation buttons of DECK B

(U.S.A. model)

Amplifier or receiver

REAR PANEL CONNECTIONS

Make sure that power to both the deck and your amplifier/receiver is turned off

before making any connections.

÷ The White plug on the paired connecting cables corresponds to the Left

channel and the Red plug corresponds to the Right channel. Make sure that

the left and right channel connections are properly made, and that the plugs

are inserted firmly.

÷ The LINE OUT/PLAY jacks on the deck should be connected to the TAPE PB

(Playback/Input) jacks on your amplifier/receiver, and the LINE IN/REC jacks

on the deck should be connected to the REC OUT (Recording/Output) jacks

on your amplifier/receiver.

÷ The LINE OUT terminals on this unit are numbered 3 and the LINE IN jacks

are numbered 4. When connecting this unit to a YAMAHA amplifier or

receiver whose terminals are numbered 1, 2, 3, 4 ... (etc.), connect this

unit's LINE OUT terminals to the input terminals numbered 3 and connect this

unit's LINE IN terminals to the output terminals numbered 4 on the rear panel

of the amplifier or receiver.

÷ Connect the power cord to an AC wall outlet or to an AC outlet on the rear

panel of your amplifier/receiver (if provided).

NATURAL SOUND CASSETTE DECK KX-W421

DOLBY NR

OFF/ B/ C

REC

LEVELBALANCE

PLAY TRIM

PHONES

STANDBY/ON

MODE

O / p / ∏ / RELAY

PLAYBACK

DECK A

Stabilizer

RECORD/PLAYBACK

DECK B

L R MIN MAX

–+

CassetteStabilizerCassette

CLOSE

% %

CLOSE

DIRECTION RESETRESET DIRECTION

! ⁄

&

SEARCH

!⁄

&

MUTE/SEARCH

REC/PAUSE

PLAYPLAY

EJECT EJECT

NORMAL HIGH

DUBBING A # B

0 0

5

ENGLISHFRANÇAISDEUTSCHSVENSKAITALIANOESPAÑOLDUTCH

PLAYBACK (Common to DECKs A and B)

Preparation for playback

÷ Turn on the STANDBY/ON switch.

÷ Set your amplifier or receiver to cassette deck function mode.

BASIC OPERATION - To play back a cassette tape

Example: KX-W421

EJECT

DOLBY NR

OFF/ B/ C

Refer to the following

description.

MODE

“/[/”/

RELAY

21

35

4

Refer to the following

description.

DIRECTION

Select the tape running direction for DECK A

or B. Each time this button is pressed, the

tape running direction changes between

forward (#) and reverse (@), and the

corresponding indicator lights on the display.

To stop playback

Press the & button. To remove the cassette tape, press the

EJECT button. The cassette compartment door opens. To

set the unit to standby mode, press the STANDBY/ON

button.

To set the counter reading to “0000”

Press the RESET button. Use the tape counter to aid in

locating a point on a tape (0000 to 9999).

To fast forward or rewind the tape

When the tape running indicator # is lit:

Pressing the ⁄ button fast forwards the tape while

pressing the ! button rewinds the tape.

When the tape running indicator @ is lit:

Pressing the ! button fast forwards the tape while

pressing the ⁄ button rewinds the tape.

Insert the cassette with the exposed tape side facing down. (The side

facing you is called the forward side and the opposite side is called the

reverse side.) To close the compartment, push the section of the

compartment door marked % CLOSE until it locks shut.

PLAY

NATURAL SOUND CASSETTE DECK KX-W421

DOLBY NR

OFF/ B/ C

REC

LEVELBALANCE

LR

PLAY TRIM

PHONES

DIRECTION

STANDBY/ON

MODE

O / p / ∏ / RELAY

! ⁄

&

SEARCH

PLAY PLAY

EJECT

NORMAL HIGH

DUBBING A # B

!⁄

&

MUTE/SEARCH REC/PAUSE

EJECT

RESET

RESET DIRECTION

Stabilizer

%

CLOSECLOSE

%

PLAYBACK

DECK A

Cassette

RECORD/PLAYBACK

DECK B

StabilizerCassette

–+

MIN MAX

0

23

1

STANDBY/ON

PHONES

RESET

!

45

⁄

&

0

6

DOLBY NR selector setting (in step 2)

Be sure to set the DOLBY NR selector according to the

system used for recording.

OFF: For a tape recorded with DOLBY NR OFF.

B: For a tape recorded with DOLBY B NR.

C: For a tape recorded with DOLBY C NR.

REVERSE MODE selector setting (in step 3)

The auto reverse function allows the tape running direction

be reversed automatically. Select an auto reverse mode

(

, , or

RELAY

) or manual reverse mode

(

).

: When playback or fast forwarding (or rewinding) of

one side of a tape is finished, the deck stops at the

end of the tape.

:Both sides of the tape are played back. After

playing, the deck stops at the end of the tape.

(When the tape running direction is set to ¤, only

the reverse side is played.)

: Both sides of the tape are repeatedly played back

(up to 8 times).

RELAY

: Cassette tapes loaded in DECKs A and B

are played back sequentially. (See “RELAY

PLAYBACK” on page 8.)

Display during playback

Tape counter

Peak level meters

Indicate the peaks of the signal levels during recording and playback over a –30 dB to +6 dB range. There are separate meters for each left

and right channel. These level meters have a peak hold function which holds the peak level for about 1.5 seconds.

¤

30 dB

—

A

NORM

‹

R

L

20 15 10 8 6 4 2 0 2 4 6

+

¤

B

‹

RELAY

DUB HIGH RECB C

KX-W421/

KX-W321

The A or B indicator shown in

the display represents the

last deck operated.

Note

Never press the EJECT button when the tape is in motion.

To adjust the volume level

Use the volume control of the amplifier or receiver.

To use headphones

Insert the headphones plug into the PHONES jack. Since

the sound is also heard from the speakers, operate the

amplifier to cut off the sound from the speakers for private

listening.

Tape running direction

indicator (DECK A)

Tape running direction

indicator (DECK B)

7

ENGLISHFRANÇAISDEUTSCHSVENSKAITALIANOESPAÑOLDUTCH

Notes

÷ The blank interval between selections must be at least 4 seconds long.

÷ Selection search may not operate properly with tapes recorded at a low recording level or which have excessive noise.

Example: KX-W421

SELECTION SEARCH - To play back a desired selection by searching for the beginning of the selection

When the @ tape running indicator is lit:

To search for the next selection

When the # tape running indicator is lit:

When the @ tape running indicator is lit:

To search for the beginning of the current selection

When the # tape running indicator is lit:

To search for the selection located before the current selection

÷ Operate the following buttons when the beginning of the current selection is being played.

When the # tape running indicator is lit:

When the @ tape running indicator is lit:

Press

simultaneously.

⁄

MUTE/SEARCH

!

MUTE/SEARCH

!

Press

simultaneously.

Press

simultaneously.

⁄

MUTE/SEARCH

Press

simultaneously.

!

MUTE/SEARCH

Press

simultaneously.

MUTE/SEARCH

⁄

Press

simultaneously.

NATURAL SOUND CASSETTE DECK KX-W421

DOLBY NR

OFF/ B/ C

REC

LEVELBALANCE

PLAY TRIM

PHONES

STANDBY/ON

MODE

O / p / ∏ / RELAY

PLAYBACK

DECK A

Stabilizer

RECORD/PLAYBACK

DECK B

L R MIN MAX

–+

CassetteStabilizerCassette

DIRECTION RESETRESET DIRECTION

! ⁄

&

SEARCH

!⁄

&

MUTE/SEARCH

REC/PAUSE

EJECT EJECT

NORMAL HIGH

DUBBING A # B

0

RESET

!⁄

MUTE/SEARCH

CLOSE

% %

CLOSE

PLAYPLAY

0

8

Example: KX-W421

RELAY PLAYBACK - To play DECK A and DECK B sequentially

Load the cassette tapes into DECKs A and B, start playback from DECK A.

The playback patterns differ according to the setting of the MODE button. Refer to the following.

When the MODE button is set to

RELAY

:

DECK A (forward side \ reverse side) \ DECK B (forward side \ reverse side)

When the MODE button is set to

:

DECK A (forward side \ reverse side) DECK B (forward side \ reverse side)

When the MODE button is set to

:

DECK A (forward side \ reverse side) DECK B ( forward side \ reverse side)

÷ When the tape running direction is set to ™, only the reverse side is played.

When the MODE button is set to

:

DECK A (forward side or reverse side) DECK B (forward side or reverse side)

Display

5

Up to 8 times

5

Up to 8 times

RELAY

1

2

3

100

10 dB

1k

10kHz

When the level of high frequencies is either over emphasized or absent while playing a tape recorded on another cassette deck,

adjust the high frequency response with the PLAY TRIM control.

When high frequencies are too loud,

attenuate the high frequencies.

PLAY TRIM

When high frequencies are too soft, boost

the high frequencies.

0

1 High frequency sound is too loud.

2 Flat

3 High-frequency sound is too soft.

PLAY TRIM CONTROL ADJUSTMENT ( KX-W421 only)

5

NATURAL SOUND CASSETTE DECK KX-W421

DOLBY NR

OFF/ B/ C

REC

LEVELBALANCE

PLAY TRIM

PHONES

STANDBY/ON

MODE

O / p / ∏ / RELAY

PLAYBACK

DECK A

Stabilizer

RECORD/PLAYBACK

DECK B

L R MIN MAX

–+

CassetteStabilizerCassette

DIRECTION RESETRESET DIRECTION

! ⁄

&

SEARCH

!⁄

&

MUTE/SEARCH

REC/PAUSE

EJECT EJECT

NORMAL HIGH

DUBBING A # B

0

PLAY TRIMMODE

CLOSE

% %

CLOSE

PLAYPLAY

0

PLAY TRIM

9

ENGLISHFRANÇAISDEUTSCHSVENSKAITALIANOESPAÑOLDUTCH

RECORDING

EJECT

Recording

starts.

Play the program source to be

recorded and adjust the

recording level and balance.

(KX-W321 does not have a

REC BALANCE control.)

LEVELBALANCE

REC

1

67

Preparation for recording

÷ Turn on the STANDBY/ON switch.

÷ Set your amplifier or receiver to cassette deck function mode.

BASIC OPERATION - To record a program source

Example: KX-W421

LRMIN MAX

0

3

DOLBY NR

OFF/ B/ C

2

Insert the cassette into DECK B with the

exposed tape side facing down. (The

side facing you is called the forward side

and the opposite side is called the

reverse side.)

To close the compartment, push the

section of the compartment door marked

% CLOSE until it locks shut.

4

Select the tape running direction.

(Press the DIRECTION button for DECK B.) Each

time the button is pressed, the tape running direction

changes between forward (#) and reverse (@), and

the indicator lights on the display.

5

The REC indicator

lights on the display.

The deck enters the

Rec/Pause mode.

REC/PAUSE

DIRECTION

MODE

“/[/”/

RELAY

Refer to the following

description.

Refer to the following

description.

PLAY

NATURAL SOUND CASSETTE DECK KX-W421

DOLBY NR

OFF/ B/ C

REC

LEVELBALANCE

LR

PLAY TRIM

PHONES

DIRECTION

STANDBY/ON

MODE

O / p / ∏ / RELAY

! ⁄

&

SEARCH

EJECT

NORMAL HIGH

DUBBING A # B

!⁄

&

MUTE/SEARCH REC/PAUSE

EJECT

RESET

RESET DIRECTION

Stabilizer

PLAYBACK

DECK A

Cassette

RECORD/PLAYBACK

DECK B

StabilizerCassette

–+

MIN MAX

0

23

STANDBY/ON

PHONES

RESET

!

47

⁄

&

5

6

MUTE/SEARCH

PLAY PLAY

%

CLOSECLOSE

%

1

0

10

¤

30 dB

—

A

‹

R

L

20 15 10 8 6 4 2 0 2 4 6

+

¤

B

‹

REC

RELAY

B C

DOLBY NR selector setting (in step 2)

Set the DOLBY NR selector according to your purpose.

OFF: No noise reduction.

B: For recording the sources with Dolby B NR.

C: For recording the sources with Dolby C NR.

÷ Dolby noise reduction is an extremely effective method of

reducing undesirable background hiss on tapes. This unit

incorporates both Dolby B NR and the newer Dolby C NR

system. Dolby C NR is approximately twice as effective

as the earlier Dolby B NR.

REVERSE MODE selector setting (in step 3)

The auto reverse function allows the tape running direction

to be reversed automatically. Select the auto reverse mode

(

) or manual reverse mode ( ).

: When recording on one side of a tape is finished, the

deck stops at the end of the tape.

:Both sides of a tape are recorded. After recording,

the deck stops at the end of the tape.

÷ When the tape running direction is set to ™, only

the reverse side is recorded.

÷ If you select

or

RELAY

, the reverse mode

automatically switches to

in step 5.

Display during recording

Peak level meters

Indicate the peaks of the signal levels during recording and playback over a –30 dB to +6 dB range. There are separate meters

for each left and right channel. These level meters have a peak hold function which holds the peak level for about 1.5 seconds.

Tape counter

Use the tape counter to aid in locating a point on a tape (0000 to 9999).

To set the counter reading to “0000”, press the RESET button.

The A or B indicator shown in

the display represents the

last deck operated.

Setting the recording level (in step 6)

Play the loudest passage of the source to be recorded and

watch the meter readings.

Adjust the REC LEVEL control so that the highest peak

reaches +4 of the optimum recording level. Normally, it is

best to adjust the REC BALANCE control (KX-W421 only)

such that the left and right meter readings are even.

KX-W421/

KX-W321

To stop recording:

Press the & button.

To stop recording temporarily:

Press the REC/PAUSE button. To resume recording, press

the PLAY button.

REC indicator

DOLBY B/ C indicator

MODE indicator

Tape running direction indicator

11

ENGLISHFRANÇAISDEUTSCHSVENSKAITALIANOESPAÑOLDUTCH

Example: KX-W421

REC MUTE OPERATION - Inserting a blank space during recording

REC RETURN OPERATION - To return to the point at which the recording started

A 4-second blank interval is automatically recorded on the

tape and then the deck enters Rec/Pause mode.

If a blank interval longer than 4 seconds is desired, keep

pressing for as long as you want. When the MUTE/

SEARCH button is released, the deck enters Rec/Pause

mode after making a 4-second blank interval.

To resume recording, press the PLAY button.

÷ If a blank interval shorter than 4 seconds is desired, press

the PLAY button at the desired point during Rec mute

mode. Recording will be resumed from that point.

During recording:

During Rec mute operation, the REC indicator blinks.

During recording:

When the # indicator

is lit:

!

⁄

When the @ indicator

is lit:

÷ If you press the PLAY button during recording, Rec Return

automatically rewinds the tape to the point where the

PLAY button was pressed.*

If you reset the tape counter to “0000” during recording,

Rec Return automatically rewinds the tape to the “0000”

point.

Rec Return functions according to the most recent

operation. For example, if you reset the tape counter to

“0000” and then press the PLAY button later, Rec Return

rewinds to the point where the PLAY button was pressed.

* The PLAY button cannot be used to mark a return point

while dubbing.

MUTE/SEARCH

DOLBY HX PRO DYNAMIC BIAS SERVO SYSTEM

(KX-W421 only)

This unit incorporates the Dolby HX Pro system which

automatically controls the effective bias to reduce

distortion and noise, improving high frequency

response during recording. Tapes recorded with this

system retain the same high quality even when played

back on any other cassette deck.

Synchronized recording function

When operating this unit in combination with the

YAMAHA CD Player which has SYNCHRO button on its

remote control transmitter, CD Synchronized recording

function can be utilized. This function is operated with

the remote control transmitter of the CD Player.

(Regarding the operation, refer to the manual of the CD

Player.)

NATURAL SOUND CASSETTE DECK KX-W421

DOLBY NR

OFF/ B/ C

REC

LEVELBALANCE

PLAY TRIM

PHONES

STANDBY/ON

MODE

O / p / ∏ / RELAY

PLAYBACK

DECK A

Stabilizer

RECORD/PLAYBACK

DECK B

L R MIN MAX

–+

CassetteStabilizerCassette

DIRECTION RESETRESET DIRECTION

! ⁄

&

SEARCH

!⁄

&

MUTE/SEARCH

REC/PAUSE

EJECT EJECT

NORMAL HIGH

DUBBING A # B

0

!⁄

MUTE/SEARCH

CLOSE

% %

CLOSE

PLAYPLAY

0

12

DUBBING (From DECK A to DECK B)

12

Set the MODE selector to

or position.

If you select or

RELAY

, the reverse

mode automatically switches to

.

Set the

DIRECTION

buttons for DECKs

A and B.

3

Set the dubbing speed to either NORMAL

(normal speed) or HIGH (twice the normal

speed) with the DUBBING buttons*.

Dubbing starts automatically.

DUBBING A # B

NORMAL HIGH

The corresponding NORM

or HIGH indicator lights on

the display.

* Higher quality sound will be obtained with the

NORMAL setting.

Note

During dubbing, Dolby NR is automatically set to off and the

recorded tape can be dubbed as is. (When the tape to be

dubbed is recorded with Dolby NR, this effect is also

dubbed.)

PLAY TRIM control adjustment (KX-W421 only)

For normal use, set the PLAY TRIM control to the center

position.

When the high frequencies sound is too noticeable or too

weak while monitoring the sound of DECK B, compensate

the high frequency response with the PLAY TRIM control

before dubbing. The compensated sound can be dubbed

onto DECK B.

As the compensation result depends on the quality of the

tape loaded in DECK A, the monitored sound cannot be

recorded as it is.

Refer to “PLAY TRIM CONTROL ADJUSTMENT” on page

8.

To stop dubbing

Press the & button. (If you press the & button on DECK B,

both decks stop simultaneously and the dubbing mode is

cancelled. If you press the & button on DECK A, DECK A

stops immediately and then DECK B stops after recording a

4-second blank section.)

When the tape in DECK B reaches its end, DECK B stops

and then DECK A stops.

When the tape in DECK A reaches its end, DECK A stops

and DECK B stops after providing a blank section of about 4

seconds.

Available operations while dubbing

The Rec Return function can be carried out on DECK B.

Refer to “REC RETURN OPERATION” on the previous

page.

You can make dubbing from DECK A to DECK B. Open the cassette compartments by pressing the EJECT buttons and load a

blank cassette tape in DECK B and the original cassette tape in DECK A.

Example: KX-W421

Display during dubbing

MODE

“/[/”/

RELAY

DIRECTION

NORM or HIGH

indicator lights during

dubbing.

Lights during dubbing.

NATURAL SOUND CASSETTE DECK KX-W421

DOLBY NR

OFF/ B/ C

REC

LEVELBALANCE

PLAY TRIM

PHONES

STANDBY/ON

MODE

O / p / ∏ / RELAY

PLAYBACK

DECK A

Stabilizer

RECORD/PLAYBACK

DECK B

L R MIN MAX–+

CassetteStabilizerCassette

DIRECTION RESETRESET DIRECTION

! ⁄

&

SEARCH

!⁄

&

MUTE/SEARCH

REC/PAUSE

EJECT EJECT

NORMAL HIGH

DUBBING A # B

0

3

2

1

¤

30 dB

–

A

NORM

‹

R

L

20 15 10 8 6 4 2 0 2 4 6

+

¤

B

‹

RELAY

DUB HIGH RECB C

CLOSE

% %

CLOSE

PLAYPLAY

0

13

ENGLISHFRANÇAISDEUTSCHSVENSKAITALIANOESPAÑOLDUTCH

PROTECTING YOUR RECORDINGS

All cassette tapes are provided with erasure protection holes

to prevent accidental erasure of recorded contents. There is

a small tab covering the hole on each side of the cassette,

and it should be broken off after recording the tape. Without

this tab covering the hole, it is impossible to record onto that

tape. Thus, you can safely protect a recording for as long as

you wish without fear of accidental erasure. Should you wish

to use a cassette tape protected in this way for recording,

simply covering the hole with adhesive tape will permit

erasure and re-recording.

÷ When using Chrome (Type II/HIGH <CrO

2>) or Metal

(Type IV/METAL) tapes, make sure you do not cover the

hole intended for the Auto Tape Selector operation.

TAKING UP SLACK IN THE TAPE

As a precaution against tape entanglement and damage,

remove any slack in the tape before inserting cassettes into

the deck. This is accomplished by inserting a pencil, pen or

similar object into one of the spools and gently winding it

until all the slack is removed. You do not have to wind it too

tightly.

Be careful not to touch the tape part itself. It is very delicate

and touching it may damage the tape and its recorded

contents.

STORING CASSETTES

After putting a cassette tape back into its case, store it in a

location away from exposure to direct sunlight, humidity,

high temperatures, and magnetic fields (away from television

sets, speakers, etc.). High temperatures and humidity will

damage the tape itself, while exposure to magnetic fields

may cause a loss of recorded material. Avoid touching the

tape surface with your fingers, since dirt or finger oil will

contaminate the deck’s heads.

CASSETTE TAPES

There are many different types of cassette tapes available.

However, they all conform to standard specifications so any

brand may be used with the deck.

÷ Classification of Cassette Tapes by Formulation:

Cassette tapes are available in four basic types depending

on their formulation, or type of magnetic material and

manufacturing process. These four types are commonly

known as Normal (Type I/NORM), Chrome (Type II/HIGH

<CrO

2>), Ferrichrome (Type III/FeCr), and Metal (Type IV/

METAL), and they each require specific tape deck

adjustments for optimum performance.

* YAMAHA does not recommend the use of 120 minute

length cassettes since the extreme thinness of the tape

makes them susceptible to mechanical and recording

problems.

AUTO TAPE SELECTOR DETECTION SLOTS

The deck has a built-in Auto Tape Selector which

automatically adjusts for the proper bias, level and

equalization according to the tape formulation — all you

have to do is to load a cassette and the Auto Tape Selector

does the rest.

The Auto Tape Selector determines which type of tape is

loaded by sensing detector slots in the top of the tape shell.

Each tape formulation has its own characteristic hole

markings standardized by the tape industry.

÷ Early model Metal (Type IV/Metal) tape formulation

cassette shells do not have the slots for Auto Tape

Selector operation. As a result, early model Metal type

tapes recorded on another deck will be played back with

the deck at the Chrome (Type II/HIGH <CrO

2>) settings.

YAMAHA does not recommend using this kind of tape.

÷ The deck does not have the required setting for

Ferrichrome (Type III/FeCr) tape, since this tape

formulation is not widely used. Should you use a

Ferrichrome tape, it will be recorded and played back at

the Normal (Type I/NORM) settings, which will result in an

unnatural high frequency emphasis. This effect may be

compensated for somewhat by adjusting the PLAY TRIM

control and/or the tone controls of your amplifier/receiver

during playback.

Detector slotsDetector slots

TYPE II TYPE IV

14

With the optional remote control transmitter RKX1, you can

operate this unit at your listening position. For details, refer

to the instruction manual supplied with the remote control

transmitter.

REMOTE CONTROL OPERATION RANGE

MAINTENANCE

CLEANING OF THE TAPE PATH

Continued high quality performance of your deck is

dependent upon periodic cleaning of the heads, capstan,

pinch roller, and all surfaces over which the tape travels.

Normal use will cause an accumulation of dirt and dust on

the heads, capstans, and pinch rollers. This can lead to

poor sound quality, drop outs (intervals with no sound),

unsteady tape speed, loss of high frequency response, etc.

Thus, clean the heads and all surfaces over which the tape

travels with a commercially available cleaning cassette and

fluid type cleaner.

DEMAGNETIZATION

After 20-30 hours of use, enough residual magnetism will

build up on the heads to cause poor high frequency

reproduction. At this time you should use a commercially

available cassette tape-type head demagnetizer.

÷ When cleaning the tape path or demagnetizing the heads,

be sure to follow carefully the instructions of the

concerning materials such as cleaning fluid or head

demagnetizer.

CapstanCapstan

Pinch rollerPinch roller

Heads

OPTIONAL REMOTE CONTROL TRANSMITTER

Example: KX-W421

DECK B

30°

7 m (23 feet)

Remote sensor

SINGLE DECK

INTRO SCAN

DOUBLE DECK

DUBBING

DECK A/B DIR A DIR B

COUNTER

RESET

PLAY

SEARCH

REC/PAUSE REC MUTE

STOP

RKX1

s

¤‹

!

⁄

15

ENGLISHFRANÇAISDEUTSCHSVENSKAITALIANOESPAÑOLDUTCH

If your cassette deck fails to operate normally, check the following table. It lists common operating errors and simple measures

which you can take to correct the problem. If it cannot be corrected, or the symptom is not listed, disconnect the deck’s power

cord and contact your authorized YAMAHA dealer or authorized service center for help.

Cause

÷ Power plug is not properly plugged in.

÷ Cassette shell is warped or damaged.

÷ There is an influence of strong external

noise (lightning, excessive static

electricity, etc.) or a misoperation was

performed while using this unit.

÷ No cassette tape loaded.

÷ Protective tabs are broken off.

÷ Head is dirty.

÷ Head is magnetized.

÷ Tape is damaged or of poor quality.

÷ Tape is bad (stretched, deformed, etc.).

÷ Cassette shell is warped.

÷ Recording level is too high.

÷ Faulty connection between deck and

stereo amplifier/receiver.

÷ Head is dirty.

÷ Head is magnetized.

÷ Worn out or poor quality tape.

÷ Connection(s) improperly made.

÷ Affected by external electrical noise.

÷ Dirty capstan, pinch roller, etc., or poor

tape.

÷ Tape is wound unevenly.

÷ Slack tape, or tape spillage wound

around capstan.

÷ REC LEVEL control is set to too low.

÷ Protective tabs are broken off.

÷ Blank section is too short.

÷ Recorded section has low-level portions.

÷ Conversation, etc. has been recorded.

÷ Dolby NR-recorded tape is played back

in OFF position.

Cure

÷ Reinsert plug properly.

÷ Do not play damaged tapes.

÷ Turn the unit off and disconnect the AC

power from the AC outlet. After about

30 seconds have passed, connect the

power and try again.

÷ Load a cassette tape.

÷ Change tape or cover protective hole

with adhesive tape.

÷ Clean head.

÷ Demagnetize head using head

demagnetizer.

÷ Change to a different tape.

÷ Replace with a fresh tape.

÷ A warped cassette shell cannot be

fixed. Replace with another tape and

test.

÷ Check input level with signal level meter

and use lower rec level when recording.

÷ Check and secure connections.

÷ Clean head.

÷ Demagnetize head with head

demagnetizer.

÷ Change to better tape.

÷ Check input and output connections

and reinsert properly.

÷ Move deck away from electrical

appliances (TV, fluorescent light,

electric blanket, etc.).

÷ Clean capstan and pinch roller, or

change to better tape.

÷ Rewind tape.

÷ Insert pencil in hole in cassette shell

and turn to take up slack.

÷ Adjust REC LEVEL control.

÷ Change tape or cover protective hole

with adhesive tape.

÷ Blank sections must be at least 4

seconds long.

÷ No remedy

÷ Play back in appropriate Dolby NR

position.

Fault

Tape doesn’t move in recording or

playback.

If it happens that this unit does not

work normally.

REC/PAUSE button fails to function.

Sounds become faint and sometimes

inaudible.

Recorded sound is distorted.

Tape is playing back, but no sound is

heard.

Excessive noise.

Excessive wow (wavering of the

sound).

Tape stops in the middle of recording

or playback.

Fails to record.

Search does not operate correctly.

High frequencies in the playback

sound are emphasized and unpleasant

to listen to, and noise level (hiss) is

also high.

TROUBLESHOOTING

16

Cause

÷ Normally-recorded tape is played back in

Dolby NR.

÷ Heads are dirty.

÷ Heads are magnetized.

÷ Basic levels are different for different

cassette decks.

÷ The batteries are exhausted.

÷ The remote control transmitter is

operated from an incorrect distance or

angle.

÷ The remote control sensor is lighted

strongly.

Cure

÷ Play back in OFF position.

÷ Clean heads and carry out

demagnetization with head

demagnetizer.

÷ This is not a fault.

÷ Replace batteries.

÷ Operate it from less than 7 meters

(about 23 ft.) and 30°.

÷ Place the unit away from the strong

light.

Fault

Playback sound is muffled and high

frequencies are inaudible.

When playing back tapes recorded on

other decks, meter deflections are

greater (smaller) than when recorded.

The remote control transmitter cannot

be operated.

Type..................................... Auto reverse 4-track, 2-channel

recording and playback stereo double cassette deck

Motors .........................................DC servo motor x 2 (main)

Heads ....................Recording/playback: Hard Permalloy x 1

Erase: Double-gap Ferrite x 1

Playback: Hard Permalloy x 1

Rapid Transport .......................................... 100 sec. (C-60)

Wow and Flutter

WRMS ......................................................................0.08%

W.Peak ...................................................................±0.15%

Signal-to-Noise Ratio

(Dolby NR off)...........................................................58 dB

(Dolby B NR on) .......................................................66 dB

(Dolby C NR on) .......................................................74 dB

Frequency Response (–20 dB)

<KX-W421>

Type I/Normal.............................. 20 ~ 17,000 Hz ±3 dB

Type II/High (CrO

2) .................... 20 ~ 18,000 Hz ±3 dB

Type IV/Metal .............................. 20 ~ 20,000 Hz ±3 dB

<KX-W321>

Type I/Normal.............................. 20 ~ 16,000 Hz ±3 dB

Type II/High (CrO

2) .................... 20 ~ 17,000 Hz ±3 dB

Type IV/Metal .............................. 20 ~ 19,000 Hz ±3 dB

Harmonic Distortion

KX-W421 .................................................... less than 0.8%

KX-W321 .................................................... less than 1.0%

Input Sensitivity/Impedance

Line ......................................................100 mV/43 k-ohms

Output Level

Line .....................................................570 mV/1.4 k-ohms

Phones..................................................... 0.25 mV/8 ohms

Channel Separation (1 kHz)...................... more than 40 dB

Crosstalk (125 Hz) ..................................... more than 55 dB

SPECIFICATIONS

GENERAL

Power Supply

U.S.A. and Canada model ........................... 120 V, 60 Hz

Europe and U.K. model ............................... 230 V, 50 Hz

Australia model............................................ 240 V, 50 Hz

General and China model . 110/120/220/240 V, 50/60 Hz

Power Consumption

KX-W421 ............................................14 W/7 W (Standby)

KX-W321

U.S.A. and Canada model.............11 W/7 W (Standby)

Other models .................................12 W/7 W (Standby)

Dimensions (W x H x D)...................... 435 x 146 x 279 mm

(17-1/8" x 5-3/4" x 11")

Weight ........................................................... 5.0 kg (11 lbs.)

Accessory

Audio cord................................................................ 1 pair

* Specifications subject to change without notice.

17

ENGLISHFRANÇAISDEUTSCHSVENSKAITALIANOESPAÑOLDUTCH

Nous vous remercions d’avoir acheté la platine à cassette stéréo YAMAHA.

ATTENTION: LIRE CECI AVANT DE FAIRE FONCTIONNER VOTRE

APPAREIL.

1. Cet appareil est une platine à cassette stéréo

sophistiquée. Pour en garantir un bon

fonctionnement et d’excellentes performances, lire ce

manuel avec attention.

2. Choisir avec soin l’endroit où vous installerez votre

appareil. Eviter de le placer exposé directement au

soleil ou près d’une source de chaleur. Eviter aussi

les endroits sujets aux vibrations, à la poussière, la

chaleur, le froid ou à l’humidité. L’éloigner de sources

de bourdonnement telles que des transformateurs ou

des moteurs.

3. Ne pas ouvrir le coffret car ceci risque

d’endommager la platine ou de provoquer des chocs

électriques. Si un objet pénètre dans la platine,

contacter votre revendeur local.

4. Pour débrancher la fiche du cordon d’alimentation,

saisir la fiche; ne pas tirer sur le cordon lui-même.

5. Ne pas forcer quand vous faites fonctionner les

commutateurs et boutons.

6. Quand vous déplacez l’appareil, s’assurer qu’il est

débranché et retirer tous les câbles le raccordant à

d’autres appareils.

7. Ne pas essayer de nettoyer cet appareil avec des

diluants chimiques car ceci risque d’abîmer le fini.

Utiliser un chiffon propre et sec.

8. Ne jamais approcher d’objets métalliques (par

exemple un tournevis, des outils, etc.) de l’ensemble

des têtes d’enregistrement/lecture. Ceci non

seulement rayerait ou endommagerait le fini lisse

comme un miroir des têtes mais aussi risquerait de

changer les caractéristiques magnétiques des têtes,

provoquant une détérioration de la qualité de la

reproduction.

9. Bien que la tête d’enregistrement/lecture utilisée

dans cet appareil soit une tête de haute qualité

possédant d’excellentes caractéristiques de

reproduction, elle peut se salir après l’utilisation de

bandes usagées ou à cause de l’accumulation de

poussière avec le temps. Ceci peut avoir un effet

néfaste sur la qualité de reproduction. Nettoyer

régulièrement les têtes avec un des nettoyeurs de

têtes du marché ou avec des solutions de nettoyage

comme expliqué plus loin dans ce manuel.

10. Bien lire la section “DETECTION DE PANNES” de ce

manuel pour trouver la cause d’erreurs de

fonctionnement communes avant de conclure que

votre appareil est en panne.

11. Garder ce manuel en lieu sûr pour une référence

ultérieure.

12. Sélecteur de tension (modèle général pour la

Chine seulement)

Le sélecteur de tension sur le panneau arrière de

cet appareil doit être réglé sur votre tension

secteur locale avant de brancher l'appareil sur

une prise CA. (Sélecteur de tension réglable sur

110/120/220/240 V CA.)

REMARQUE:

Vérifier les lois sur le copyright de votre pays pour

enregistrer à partir de disques, disques

audionumériques, de la radio, etc. L'enregistrement de

matériel sous copyright peut être une violation de la loi

sur le copyright.

ATTENTION

POUR EVITER TOUT RISQUE D’INCENDIE OU DE

CHOC ELECTRIQUE, NE PAS EXPOSER CET

APPAREIL A LA PLUIE NI A L’HUMIDITE.

Cet appareil n’est pas déconnecté de la source

d’alimentation CA tant qu’il est branché à la prise secteur,

même si l’appareil lui-même est mis hors tension. Cet

état est appelé mode d’attente.

Dans cet état, l’appareil consomme une très faible

quantité de courant.

POUR LES CONSOMMATEURS CANADIENS

POUR EVITER LES CHOCS ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER JUSQU’AU FOND.

CET APPAREIL NUMERIQUE DE LA CLASSE B

RESPECTE TOUTES LES EXIGENCES DU

REGLEMENT SUR LE MATERIEL BROUILLEUR DU

CANADA.

18

SOMMAIRE

CARACTERISTIQUES

÷ Platine B équipée d’une tête d’enregistrement et de

lecture en Permalloy dur de haute qualité et platine A

d’une tête de lecture fabriquée dans le même matériau

÷ Réduction de bruit Dolby B/C

÷ Commande d’ajustement de lecture pour une compatibilité

améliorée de lecture avec d’autres platines à cassette

(KX-W421 seulement)

÷ Sélecteur automatique de bande

÷ Système d’extension de dynamique Dolby HX Pro

Dynamic (KX-W421 seulement)

÷ Lecture par relais de la platine A à la platine B

÷ Recherche de morceaux

÷ Fonction d’enregistrement silencieux

÷ Fonction de retour après enregistrement

÷ Fonctionnement aisé de la copie à vitesse sélectionnable

(normale/élevée)

÷ Compteurs de niveau de crête avec fonction de maintien

de crête

÷ Télécommande possible grâce à l’émetteur de

télécommande en option

CARACTERISTIQUES...................................................... 18

CONNEXIONS .................................................................. 19

REMARQUES SUR CE MODE D’EMPLOI....................... 19

LECTURE (commune aux platines A et B) ....................... 20

FONCTIONNEMENT DE BASE .................................... 20

RECHERCHE DE MORCEAUX .................................... 22

LECTURE ENCHAINEE ................................................ 23

COMMANDE PLAY TRIM (KX-W421 seulement) ......... 23

ENREGISTREMENT......................................................... 24

FONCTIONNEMENT DE BASE .................................... 24

FONCTIONNEMENT DE L’ENREGISTREMENT

SILENCIEUX (REC MUTE) ........................................... 26

FONCTIONNEMENT DU RETOUR APRÈS

ENREGISTREMENT (REC RETURN) .......................... 26

COPIE (de la platine A à la platine B)............................... 27

CASSETTES..................................................................... 28

ENTRETIEN...................................................................... 29

EMETTEUR DE TELECOMMANDE OPTIONNEL ........... 29

DETECTION DE PANNES................................................ 30

CARACTERISTIQUES TECHNIQUES ............................. 31

Réduction de bruit Dolby et HX Pro headroom extension

fabriqués sous licence de Dolby Laboratories Licensing

Corporation. HX Pro est d’origine Bang & Olufsen.

DOLBY, le symbole double-D

et HX PRO sont des

marques de Dolby Laboratories Licensing Corporation.

19

ENGLISHFRANÇAISDEUTSCHSVENSKAITALIANOESPAÑOLDUTCH

PLAY

LINE IN-LINE OUT

L

R

TAPE PBREC OUT

L

R

3

REC

4

REMARQUES SUR CE MODE D’EMPLOI

Lorsque le fonctionnement des platines A et B est le même, ce mode d’emploi mentionne les touches à utiliser en prenant la

platine B pour exemple. Etant donné que l’emplacement des touches est le même sur la platine A (DECK A) et sur la platine B

(DECK B), il est très facile de localiser les touches de la platine A. Ce mode d’emploi concerne deux modèles. Toutefois, dans

la plupart des cas, seul le modèle KX-W421 est représenté sur les illustrations.

Exemple: KX-W421

CONNEXIONS

Vers une prise CA

CONNEXIONS DU PANNEAU ARRIERE

S’assurer que l’alimentation de la platine et de l’amplificateur/ampli-

syntoniseur est coupée avant d’effectuer toute connexion.

÷ La prise blanche des câbles de connexion correspond au canal de gauche

et la prise rouge au canal de droite. S’assurer que les connexions des

canaux de droite et de gauche sont correctes et que les prises sont

fermement insérées.

÷ Les prises LINE OUT/PLAY de la platine doivent être raccordées aux prises

de lecture de bande TAPE PB (lecture/entrée) de votre amplificateur/ampli-

syntoniseur et les prises LINE IN/REC de la platine doivent être connectées

aux prises de sortie d'enregistrement REC OUT (enregistrement/sortie) de

votre amplificateur/ampli-syntoniseur.

÷ Les prises LINE OUT de cet appareil portent le numéro 3 et les prises

LINE IN, le numéro 4. Lors du raccordement de cet appareil à un

amplificateur ou un récepteur Yamaha dont les prises sont numérotées 1,

2, 3, 4 ..., relier les prises LINE OUT de cet appareil aux prises d’entrée

numérotées 3 et les prises LINE IN de cet appareil aux prises de sortie

numérotées 4 que porte le panneau arrière de l’amplificateur ou du

récepteur.

÷ Connecter le cordon d'alimentation sur une prise CA murale ou sur la prise

CA du panneau arrière de votre amplificateur/ampli-syntoniseur (s'il en

comporte une).

NATURAL SOUND CASSETTE DECK KX-W421

DOLBY NR

OFF/ B/ C

REC

LEVELBALANCE

PLAY TRIM

PHONES

STANDBY/ON

MODE

O / p / ∏ / RELAY

PLAYBACK

DECK A

Stabilizer

RECORD/PLAYBACK

DECK B

L R MIN MAX

–+

CassetteStabilizerCassette

CLOSE

% %

CLOSE

DIRECTION RESETRESET DIRECTION

! ⁄

&

SEARCH

!⁄

&

MUTE/SEARCH

REC/PAUSE

PLAYPLAY

EJECT EJECT

NORMAL HIGH

DUBBING A # B

0 0

Amplificateur ou

ampli-syntoniseur

(Modèle pour les Etats-Unis)

Touches principales de la platine B (DECK B)

Touches principales de la platine A (DECK A)

20

LECTURE (commune aux platines A et B)

Préparatifs pour la lecture

÷ Mettre la platine en morche au moyen de l’interrupteur STANDBY/ON.

÷ Régler votre amplificateur ou ampli-syntoniseur sur le mode de fonction de platine à cassette.

FONCTIONNEMENT DE BASE - Pour lire une cassette

Exemple: KX-W421

EJECT

DOLBY NR

OFF/ B/ C

Se référer à la

description suivante.

MODE

“/[/”/

RELAY

1

35

4

Se référer à la

description suivante.

DIRECTION

Sélectionner la direction du défilement de la

bande pour la platine A ou B. A chaque

pression sur la touche, la direction de

défilement de la bande change vers l’avant

(#) et l’arrière (@) et l’indicateur

correspondant s’allume à l’affichage.

Pour arrêter la lecture

Presser la touche &. Pour retirer la bande, presser la

touche EJECT. La porte du compartiment cassette s’ouvre.

Pour placer l’appareil en veille, appuyez sur la touche

STANDBY/ON.

Pour remettre le compteur à zéro (“0000”)

Appuyez sur la touche RESET. Utilisez le compteur pour

localiser aisément un point sur la bande (0000 à 9999).

Pour avancer rapidement ou réembobiner la bande

Quand l’indicateur de défilement de bande # est allumé:

Une pression sur la touche ⁄ avance rapidement la bande

et une pression sur la touche ! la réembobine.

Quand l’indicateur de défilement de bande @ est allumé:

Une pression sur la touche ! avance rapidement la bande

et une pression sur la touche ⁄ la réembobine.

PLAY

2

Insérer la cassette avec le côté de la bande exposée vers le bas. (La

face tournée vers vous est appelée face avant et la face opposée face

inverse.) Pour fermer le compartiment à cassette, appuyez sur le volet à

l’endroit marqué % CLOSE de manière à obtenir la fermeture totale.

NATURAL SOUND CASSETTE DECK KX-W421

DOLBY NR

OFF/ B/ C

REC

LEVELBALANCE

LR

PLAY TRIM

PHONES

DIRECTION

STANDBY/ON

MODE

O / p / ∏ / RELAY

! ⁄

&

SEARCH

PLAY PLAY

EJECT

NORMAL HIGH

DUBBING A # B

!⁄

&

MUTE/SEARCH REC/PAUSE

EJECT

RESET

RESET DIRECTION

Stabilizer

%

CLOSECLOSE

%

PLAYBACK

DECK A

Cassette

RECORD/PLAYBACK

DECK B

StabilizerCassette

–+

MIN MAX

0

23

1

STANDBY/ON

PHONES

RESET!

45

⁄

&

0

Sayfa yükleniyor ...

Yamaha KX-W421 El kitabı

Bu kılavuz için de uygundur

Yamaha KX-W421 El kitabı

Diğer dillerde

İlgili Makaleler

Diğer Belgeler