Yamaha TF1 Kullanım kılavuzu

EN

DIGITAL MIXING CONSOLE

V4.0 Reference Manual

Table of contents

Reference Manual

TF series

-

2

-

Table of contents

Overview ................................................................................... 4

Using this document................................................................................................ 4

The display .............................................................................................................. 4

Universal operations ................................................................. 8

Library screen .......................................................................................................... 8

Keyboard screen .................................................................................................... 10

Menu .................................................................................................................... 10

Button and slider operations .................................................................................. 10

Toolbar.................................................................................... 11

SCENE screen ........................................................................................................ 11

METER screen ........................................................................................................ 14

RECORDER screen (INPUT/OUTPUT/TITLE LIST screen) .......................................... 15

MONITOR screen .................................................................................................. 19

SETUP screen (V3.0 and later)................................................................................ 22

LOGIN screen (V3.0 and later)............................................................................... 44

OVERVIEW screen.................................................................... 47

CH STRIP section ................................................................................................... 47

FADER section........................................................................................................ 49

SELECTED CHANNEL section (V4.0 and later) ........................................................ 50

Configuration screens............................................................. 57

INPUT screen......................................................................................................... 57

EQ screen .............................................................................................................. 59

GATE screen .......................................................................................................... 63

COMP screen ........................................................................................................ 65

FX screen (FX1/2, InsFX1–6) .................................................................................. 67

SEND TO AUX screen ............................................................................................ 73

ASSIGN screen....................................................................................................... 74

AUTOMIXER screen (V3.5 and later) ...................................................................... 74

CH VIEW screen..................................................................................................... 76

CH NAME screen ................................................................................................... 84

GEQ screen............................................................................................................ 85

OUTPUT screen ..................................................................................................... 87

SEND FROM screen ............................................................................................... 88

DCA ASSIGN screen............................................................................................... 90

DELAY screen (V2.5 and later)................................................................................ 92

Maintenance screen................................................................. 93

Initialize All Memory screen .................................................................................... 93

Initialize Current Memory screen ............................................................................ 94

Initialize NY64-D screen (V3.0 and later) ................................................................ 94

Input Port Trim screen............................................................................................ 95

Output Port Trim screen......................................................................................... 95

Fader Calibration screen (TF5/TF3/TF1) .................................................................. 96

Channel Color Calibration screen (TF5/TF3/TF1) .................................................... 97

Reference................................................................................. 98

List of parameters saved in Scenes and Presets........................................................ 98

Access limitation parameter list............................................................................. 104

Quick Config Input and input channel relationships ............................................. 106

Warnings and error messages ............................................................................... 108

Index...................................................................................... 110

Product dimensions............................................................... 112

Table of contents

Reference Manual

TF series

-

3

-

Procedures

Recalling a Preset............................................................................................................. 9

Editing a Preset................................................................................................................ 9

Displaying configuration screens ................................................................................... 11

Saving the current settings as a new Scene.................................................................... 12

Recalling a Scene........................................................................................................... 12

Editing a Scene.............................................................................................................. 12

Setting the fade time for a Scene (V4.0 and later).......................................................... 13

Setting the input ........................................................................................................... 16

Setting the output......................................................................................................... 17

Recording...................................................................................................................... 18

Playing back files stored on a USB storage device .......................................................... 19

Checking the input signals ............................................................................................ 20

Setting the oscillator...................................................................................................... 21

Configuring settings in the PREFERENCE screen............................................................. 26

Assigning a feature to a [USER DEFINED KEY] ................................................................ 30

Assigning a feature to a [USER DEFINED KNOB] ............................................................ 31

Assigning a feature to the footswitch............................................................................. 31

Configuring the custom fader bank ............................................................................... 32

Recalling the CUSTOM FADER BANK (TF5/TF3/TF1) ...................................................... 32

Using Recall safe function .............................................................................................. 38

Assigning channels to mute groups ............................................................................... 39

Applying access permissions.......................................................................................... 46

Resetting user settings................................................................................................... 46

Loading user settings to other TF series consoles ........................................................... 46

OVERVIEW screen operations......................................................................................... 54

Copying settings from one channel and applying them to another channel .................. 55

Setting stereo link and the input source......................................................................... 58

Adjusting EQ in manual mode....................................................................................... 61

Adjusting EQ in 1-knob EQ mode.................................................................................. 61

Setting HPF ................................................................................................................... 62

Setting LPF .................................................................................................................... 62

Setting the gate............................................................................................................. 64

Setting the compressor.................................................................................................. 66

Setting an effect ............................................................................................................ 68

Setting an insert effect................................................................................................... 68

Adjusting the SEND TO AUX level.................................................................................. 73

Setting the AUTOMIXER ................................................................................................ 75

Using GEQ..................................................................................................................... 86

Using faders to adjust GEQ (TF5/TF3/TF1)..................................................................... 86

Adjusting the SEND FROM level .................................................................................... 88

Adjusting the send level from AUX channels, STEREO channels,

and SUB channel to a MATRIX channel (V2.5 and later)..................................... 89

Assigning channels to a DCA group............................................................................... 90

Using the maintenance screen....................................................................................... 93

Calibrating the faders .................................................................................................... 96

If a fader must be calibrated again................................................................................. 96

Adjusting channel colors................................................................................................ 97

Overview

Reference Manual

TF series

-

4

-

Overview

Using this document

You can search for keywords and view reference pages while using this document.

Searching for keywords

You can use the search function of your PDF viewing software to search for the desired text

within the document.

When using Adobe Reader, enter the desired text in the search bar and press your computer's

<Enter> key to begin the search.

Moving backward and forward in your viewing history

When viewing this document using Adobe Reader, you can easily move backward and

forward in your viewing history. This is particularly useful when you click a link to jump to

another page, and then want to return to the original page.

Using the index

An index of the keywords and topics in this document can be found on page 110. You can use

the index to easily jump to the desired explanation or topic.

The display

Here we will introduce the different screens displayed on the TF Series console display.

OVERVIEW screen

This screen is displayed when you first turn on the console.

From here you can move to other screens depending on the operations that you want to

perform.

You can return to the OVERVIEW screen at any time by pressing the Home key ( ).

For the TF5/TF3/TF1, the CH STRIP section is displayed.

For the TF-RACK, the FADER section is displayed. You can switch between the CH STRIP

section and FADER section by pressing the Home key ( ).

For more information about the OVERVIEW screen, see page 47.

Overview

Reference Manual

TF series

-

5

-

Configuration screens

You can touch an area of the OVERVIEW screen to display the configuration screen for the

corresponding area.

1 Toolbar (page 11)

Displays buttons for frequently used features. When you touch a button, the

corresponding configuration screen in the main area of the display.

2 Navigation area

Allows you to select which screen is displayed in the main area of the display.

3 Main area (page 57)

Displays the screen that you select using the toolbar or navigation area.

I Navigation area

Displays the features of the currently selected channel.

You can drag the screen up and down to display other features.

CH1–CH32

1 Displays the INPUT screen. (page 57)

2 Displays the EQ screen. (page 59)

3 Displays the GATE screen. (page 63)

4 Displays the COMP screen. (page 65)

5 Displays the FX1 screen. (page 67)

6 Displays the FX2 screen. (page 67)

7 Displays the SEND TO AUX screen. (page 73)

8 Displays the ASSIGN screen. (page 74)

9 Displays the AUTOMIXER screen (V3.5 and later).

(page 74)

0 Displays the CH VIEW screen. (page 76)

ձ

ճղ

NOTE

Only CH1–CH8 are displayed on the AUTOMIXER screen.

ձ

ղ

ճ

մ

յ

ն

շ

ո

չ

պ

Overview

Reference Manual

TF series

-

6

-

CH33–CH40

1 Displays the INPUT screen. (page 57)

2 Displays the EQ screen. (page 59)

3 Displays the FX1 screen. (page 67)

4 Displays the FX2 screen. (page 67)

5 Displays the SEND TO AUX screen. (page 73)

6 Displays the ASSIGN screen. (page 74)

7 Displays the CH VIEW screen. (page 76)

STIN1/2

1 Displays the INPUT screen. (page 57)

2 Displays the EQ screen. (page 59)

3 Displays the DELAY screen. (page 92)

4 Displays the FX1 screen. (page 67)

5 Displays the FX2 screen. (page 67)

6 Displays the SEND TO AUX screen. (page 73)

7 Displays the ASSIGN screen. (page 74)

8 Displays the CH VIEW screen. (page 76)

FX RTN 1/2

1 Displays the SEND FROM screen. (page 88)

2 Displays the FX1 or the FX2 screen. (page 67)

3 Displays the EQ screen. (page 59)

4 Displays the SEND TO AUX screen. (page 73)

5 Displays the ASSIGN screen. (page 74)

6 Displays the CH VIEW screen. (page 76)

AUX1–AUX8

1 Displays the SEND FROM screen. (page 88)

2 Displays the EQ screen. (page 59)

3 Displays the GEQ screen. (page 85)

4 Displays the COMP screen. (page 65)

5 Displays the OUTPUT screen. (page 87)

6 Displays the CH VIEW screen. (page 76)

մ

ն

շ

ձ

ղ

ճ

յ

շ

ո

ձ

ղ

ճ

մ

ն

յ

ղ

ձ

ճ

մ

ն

ձ

ղ

ճ

մ

յ

ն

Overview

Reference Manual

TF series

-

7

-

AUX9/10–AUX19/20

1 Displays the SEND FROM screen. (page 88)

2 Displays the EQ screen. (page 59)

3 Displays the COMP screen. (page 65)

4 Displays the INSFX screen. (page 67)

5 Displays the OUTPUT screen. (page 87)

6 Displays the CH VIEW screen. (page 76)

DCA1–DCA8

1 Displays the DCA ASSIGN screen. (page 90)

2 Displays the CH VIEW screen. (page 76)

STEREO

1 Displays the EQ screen. (page 59)

2 Displays the GEQ screen. (page 85)

3 Displays the COMP screen. (page 65)

4 Displays the OUTPUT screen. (page 87)

5 Displays the CH VIEW screen. (page 76)

SUB

1 Displays the SEND FROM screen. (page 88)

2 Displays the EQ screen. (page 59)

3 Displays the COMP screen. (page 65)

4 Displays the OUTPUT screen. (page 87)

5 Displays the CH VIEW screen. (page 76)

MATRIX1–MATRIX4

1 Displays the SEND FROM screen. (page 88)

2 Displays the EQ screen. (page 59)

3 Displays the DELAY screen. (page 92)

4 Displays the OUTPUT screen. (page 87)

5 Displays the CH VIEW screen. (page 76)

մ

ն

ձ

ղ

ճ

յ

ձ

ղ

մ

ձ

ղ

ճ

յ

մ

ձ

ղ

ճ

յ

մ

ձ

ղ

ճ

յ

Universal operations

Reference Manual

TF series

-

8

-

Universal operations

In this section we will introduce the screens that are displayed when you press the Library key

( ) and the Menu key ( ), which are found in the Display section of the console's top

panel.

Library screen

Allows you to recall saved Presets.

A Preset is a collection of settings that are customized for a certain type of input, microphone,

instrument, etc. By recalling a Preset, you can set up a channel quickly and easily according

to the type of input, and then fine-tune the settings to your specific needs. You can even save

your own Presets.

1 Channel name

Displays the name of the channel.

2 Category selection button

Allows you to select a category.

Presets that match the selected category are displayed in the Library list.

3 Library selection button

Allows you to switch between the available Libraries. The Presets that are stored in the

selected Library are displayed in the list.

LIBRARY A: Displays the Presets stored in LIBRARY A.

LIBRARY B: Displays the Presets stored in LIBRARY B.

4 List

You can click a header in the list to sort the items by that header. (List items cannot be

sorted by "Information".)

To select a Preset, simply touch it. The selected Preset is highlighted, and can then be

saved, recalled, or edited.

A lock icon is displayed or cleared each time you touch the column. When the icon

is displayed, the Preset is write-protected.

The date on which the Preset was last saved is displayed in the Date column.

5 Recall on/off checkboxes

Allow you to determine which parameters will be recalled (checkbox on) and not be

recalled (checkbox off).

Input channels

HA: Analog/digital gain setting, phantom power on/off, phase setting

Input Select: Input source settings

Name: Channel name, icon, and color

AUX 1–8, STEREO channels

GEQ: GEQ settings

Name: Channel name, icon, and color

FX RTN, AUX9/10–AUX19/20 channels

FX: Effect settings

Name: Channel name, icon, and color

SUB, MATRIX1–4 channels

Name: Channel name, icon, and color

6 Recall CH button

Recalls a Preset to the selected channel.

7 Edit button

Touch this button to display the keyboard so you can edit the title and comment.

(Keyboard screenpage 10)

8 Store button

Saves the settings for the current channel as a Preset. The settings will overwrite the

Preset selected in the Library list.

9 Store As button

Saves the settings for the current channel as a new Preset.

Touch this button to display the keyboard so you can enter the Preset name. (Keyboard

screenpage 10)

0 Preset number (V1.1 and later)

Displays the Preset number. The first number indicates the number of Presets in the

selected category (

2), and the second number indicates the total number of Presets.

ձղ ճ պ

մ

յ

ն

շ

ո

չ

Universal operations

Reference Manual

TF series

-

9

-

Displaying the Library screen from a configuration screen

When you display the Library screen from a configuration screen, one of the following buttons

is added to the Library screen, depending on the configuration screen you were using.

Recall EQ button

Displayed when you enter the Library from the EQ screen, and recalls EQ settings only.

Recall Gate button

Displayed when you enter the Library from the GATE screen, and recalls GATE settings only.

Recall COMP button

Displayed when you enter the Library from the COMP screen, and recalls COMP settings only.

Recall FX button

Displayed when you enter the Library from the FX screen, and recalls FX settings only.

Recall GEQ button

Displayed when you enter the Library from the GEQ screen, and recalls GEQ settings only.

Library screen menu

Press the Menu key ( ) from the Library screen to display the following items.

Recalling a Preset

1.

Touch a Library selection button to select the Library that contains the desired Preset.

A list of Presets is displayed.

You can click a header in the list to sort the items by that header. (List items cannot be sorted by

"Information".)

2. Touch the desired Preset.

The selected Preset is highlighted.

3. Select the items that will be recalled.

Turn the checkboxes on for items that you want to recall.

4. Touch the Recall CH button.

The Preset is recalled to the selected channel.

Preset list

Editing a Preset

1. Recall the desired Preset.

2. Touch the Edit button.

Display the keyboard so you can edit the title and comment.

(Keyboard screenpage 10)

Edit the desired items.

3. touch the Store or Store As button.

Store button: Saves the settings for the current channel as

a Preset. The settings will overwrite the Preset selected in

the Library list.

Store As button: Saves the settings for the current channel

as a new Preset.

1 Copy

Copies the selected Preset.

2 Cut

Cuts the selected Preset.

3 Paste

Pastes the copied or cut Preset to the Library.

4 Delete

Deletes the selected Preset.

Store As

button

Store button

Edit button

ձ

ղ

ճ

մ

Universal operations

Reference Manual

TF series

-

10

-

Keyboard screen

Allows you to edit titles and comments. This screen varies depending on the operation you

are performing.

1 Cancel button

Discards any changes you made and returns to the previous screen.

2 OK button

Saves the changes you made.

3 Title field

Enter the name of the Scene here.

4 Comment field

Enter comments about the Scene here.

5 FadeTime Settings

Specifies fade time settings and switches fade times used in scenes ON/OFF. To display

the FADE TIME screen (page 14), touch the button on the right edge.

6 Keyboard

Touch to enter the desired text.

Menu

Displays a menu of options available in the current screen. The content of the menu varies

depending on which screen is being displayed. For information about each menu, refer to the

description for the corresponding page.

Button and slider operations

䐟䐠

䐡䐢

䐣

䐤

Item Term Description

Close button [X] Touch to close the current screen.

OK button Applies the current settings.

Cancel button

Cancels the operation and returns to the previous

screen.

Clear button Clears the information you entered.

Jump icon Displays the relevant screen.

Slider

Flashes in pink when you touch it to indicate it can be

operated.

You can then drag the slider on the display or turn the

[TOUCH AND TURN] knob to adjust the setting.

Pan slider

Flashes in pink when you touch it to indicate it can be

operated by the [TOUCH AND TURN] knob.

Balance slider

Edit icon

Displays the screen where you can edit information,

such as the keyboard screen.

Menu

Touch a button with "

M" displayed on it to display the

menu.

Text box

When you touch a text box that can accept values, it

flashes in pink to indicate that its content can be

changed.

Touch the box again to display the screen that allows

you to enter values.

You can also change the value by turning the

[TOUCH AND TURN] knob.

When you touch a text box that can accept text, the

keyboard screen is displayed.

When on (example):

When off (example):

On and off

Switches between on and off when you touch the

item.

Toolbar

Reference Manual

TF series

-

11

-

Toolbar

Provides access to frequently used features and system settings.

The toolbar is displayed regardless of the screen content.

1 Displays the SCENE screen.

2 Displays the METER screen. (page 14)

3 Displays the RECORDER screen. (page 15)

4 Displays the MONITOR screen. (page 19)

5 Displays the SETUP screen. (page 22) (V3.0 and later)

6 Displays the current time. (page 42)

7 Displays the LOGIN screen. (page 44) (V3.0 and later)

The name of the user that is currently logged in is displayed with the icon.

Additionally, the following items may be displayed to indicate the corresponding

status.

ACCESS: The console is accessing the USB storage device that is connected to its

USB connector.

CUE: The cue is turned on.

OSCILLATOR: The oscillator is turned on.

Quick Config: Quick Config is being used. (V2.0 and later)

SCENE screen

Allows you to manage previously saved mixer setups, or "Scenes".

When you recall a Scene, you can exempt certain settings from being replaced by the settings

contained in the Scene; this is called "recall safe".

1 Scene list selection button

Allows you to switch between the available Scene lists.

SCENE A: Displays Scene list A.

SCENE B: Displays Scene list B.

2 Scene list

Displays the Scenes saved in the selected Scene list.

You can click a header in the list to sort the items by that header. (List items cannot be

sorted by "Information".)

To select a Scene, simply touch it. The selected Scene is highlighted, and can then be

saved, recalled, or edited.

A green triangle is displayed next to the Scene that is currently recalled.

A lock icon is displayed or cleared each time you touch the column. When the icon

is displayed, the Scene is write-protected.

The date on which the Scene was last saved is displayed in the Date column.

The Fade Time column (V4.0 and later) displays whether or not the FADE TIME function

is enabled and the time setting.

Displaying configuration screens

When you touch an icon, the corresponding configuration screen is displayed.

To return to the previous screen, touch the icon again, or touch the close button ([X]) in the

upper right of the screen.

ձղճմյնշ

䐟䐠

䐡䐢䐣

Toolbar

Reference Manual

TF series

-

12

-

3 Store button

Saves the current mixer setup and assigns it to the Scene number selected in the Scene

list.

Touch this button to display the keyboard so you can edit the title and comment.

(Keyboard screenpage 10)

4 Recall button

Recalls the Scene that is selected in the Scene list.

5 Edit button

Touch this button to display the keyboard so you can edit the title and comment.

(Keyboard screenpage 10)

Saving the current settings as a new Scene

1. Touch the Scene area of the Toolbar.

2. Touch a Scene list selection button to select the Scene list.

The Scene list is displayed.

3. Touch a blank Scene.

4. Touch the Store button.

Display the keyboard so you can edit the title, comment and fade time (Keyboard screenpage 10).

Enter the new Scene name and a comment.

5. Touch the OK button.

The settings will be saved as a new Scene.

Blank Scene

Recalling a Scene

1. Touch a Scene list selection button to select the

Scene list that contains the desired Scene.

The Scene list is displayed.

2. Touch the desired Scene.

The selected Scene is highlighted.

You can click a header in the list to sort the items by that header. (List items cannot be sorted by

"Information".)

3. Touch the Recall button.

The mixer settings saved in the Scene are recalled.

The name of the recalled Scene is displayed in the upper left

of the screen.

Editing a Scene

1. Select the Scene that you want to edit.

2. Touch the Edit button.

Display the keyboard so you can edit the title, comment and fade time (Keyboard screenpage 10).

Edit the desired items.

3. Touch the OK button.

The settings will overwrite the Scene selected in the Scene list.

Selected Scene

Toolbar

Reference Manual

TF series

-

13

-

SCENE screen menu

Press the Menu key ( ) from the Scene screen to display the following items.

Setting the fade time for a Scene (V4.0 and later)

1. Select the scene for which the fade time is to be set.

2. Touch the Edit button.

The screen will display where you can edit the title, comment and fade time (SOFT KEYBOARD

screen page 10).

3. To turn the fade time on, touch the FadeTime

button. Touch the button once more to turn it off.

4. To set the fade time, touch the Fade Time display

and input the setting using the keyboard.

5. To turn the fade time on and off for each channel,

touch the button on the right edge of the screen.

6. Set each channel on or off using the FADE TIME screen.

7. Touch the OK button.

The fade times will be set for the Scene.

1 Copy

Copies the selected Scene.

2 Cut

Cuts the selected Scene.

3 Paste

Pastes the copied or cut Scene to the Scene list.

4 Delete

Deletes the selected Scene.

NOTE

• If a moving fader is stopped while holding down its corresponding [SEL] key, the fader effect stop at that

position.

• If the same scene is recalled while the fader is moving, the faders for all channels and DCA groups

immediately move to their target positions.

ձ

ղ

ճ

մ

Toolbar

Reference Manual

TF series

-

14

-

FADE TIME screen (V4.0 and later)

On this screen, you can individually turn the channels on and off for which you want to apply

fade time for the Scene.

1 Channel buttons

Use these buttons to individually turn the channels on and off for which you want to

apply fade time. If the channel is colored white, fade time is on.

FADE TIME screen menu

Press the Menu key ( ) on the FADE TIME screen to display the menu icons shown

below.

METER screen

Displays the input and output level of all the channels, and allows you to select the metering

point (i.e., the point at which the level is detected).

1 Input metering point selection menu

Select the input level metering point from the menu.

PRE HPF: After the head amp; before the HPF

PRE FADER: Before the fader

POST ON: After the [ON] key

2 Output metering point selection menu

Select the output level metering point from the menu.

PRE EQ: Before the EQ

PRE FADER: Before the fader

POST ON: After the [ON] key

3 Peak Hold button

Turn this button on to hold the peak level for each level meter. Turn this button off to

remove the peak level that was being held. The Peak Hold on/off setting affects both

input and output channels.

1 All ON

Turns on fade time for all channels.

2 All OFF

Turns off fade time for all channels.

ձ

ղ

NOTE

You can assign the Peak Hold button to a [USER DEFINED KEY]. (page 27)

ձղճ

մ

յ

Toolbar

Reference Manual

TF series

-

15

-

4 Meters

Display the input and output levels of the channels.

5 Meter display selection button

Allows you to select how many meters are displayed. Three display modes are available.

RECORDER screen (INPUT/OUTPUT/TITLE LIST

screen)

You can connect a USB storage device to the console's iPad connector and use the console

to record audio to the device, play back audio files stored on the device, and manage audio

files stored on the device.

When a USB storage device is connected to the iPad connector, your TF series console can

record its internal signals to the device as an audio file and play back files that are stored on

the device.

You can also connect an iOS device to the console and use your iPad or iPhone as an audio

input source for the mixer.

Recorded files are formatted as 48 kHz, 24-bit stereo WAV files.

Playback is supported for WAV and MP3 (MPEG-1 Audio Layer-3) files.

These features allow you to record signals from the STEREO and AUX buses to the USB

storage device, and use audio files that are saved on your iPad or USB storage device as the

source for the console's ST IN 1 channel.

մ

յ

մ

յ

մ

յ

NOTE

• Simultaneous recording and playback is not supported.

• While recording, the signal being recorded cannot be used as an INPUT channel.

• Compatible USB storage devices must be formatted in FAT32. If necessary, connect the device to the

USB connector (on the right side of the top panel) and use the contextual menu in the SAVE/LOAD

screen to format the device.

• Use only USB storage devices with a sector size of 512 bytes. (Hard drives larger than 2 TB cannot be

used.)

• USB storage devices with an allocation unit size under 4096 bytes are not supported. (This may apply

to small-capacity USB memory devices.)

• For recording, we recommend using a high-speed device, such as a hard disk drive (HDD) or solid-state

drive (SSD). USB memory devices and iOS devices can be used for playback only.

• For playback, MP3 files must be encoded at 44.1 kHz or 48 kHz, with a bit rate of 128 kbps–320 kbps.

Files encoded using variable bit rate (VBR) can be played back, but file length and elapsed playback

time may not be displayed properly.

• To enable operability from TF StageMix, the number of audio files that can be placed in the same folder

is limited to 150 files. If the total number exceeds 150, including the number of folders, then they are not

displayed in the Title list. To use more than 150 files, place them in separate folders (V4.0 and later).

Toolbar

Reference Manual

TF series

-

16

-

INPUT/OUTPUT screen

Allows you to configure inputs and outputs for playback and recording.

1 RECORD source selection menu

Allows you to select the source that will be recorded.

The source selected here is also output to CH33 and CH34 of the USB TO HOST

connector.

With V3.5 and later, you can also select MTRX 1/2 and MTRX 3/4.

2 RECORD level meter

Displays the recording level.

3 RECORD level slider

Adjusts the recording level.

4 RECORD CUE button

Turns the recording source cue on and off.

5 PLAYBACK level meter

Displays the playback level.

6 PLAYBACK level slider

Adjusts the playback level.

7 PLAYBACK CUE button

Turns the playback source cue on and off.

շ

ձղճյն

մ

NOTE

When an iPad or other iOS device is connected, "iOS device is connected. Use transport control on the

device." is displayed, and the playback button is not displayed. Use the corresponding app on the iOS

device to control playback.

Setting the input

1. Touch the RECORD source selection menu and select

the source you want to record.

2. Drag the RECORD level slider and adjust the recording

level.

RECORD level slider

Toolbar

Reference Manual

TF series

-

17

-

TITLE LIST screen

When a USB storage device is connected to the console via the iPad connector, you can use

this screen to play back audio files saved on the device and record the signal from the 2MIX

source to the device.

1 Parent directory button

Displays the directory that is one level above the current directory.

2 Current directory

Displays the path of the current directory on the USB storage device.

3 USB storage device information

Displays the volume name of the USB storage device.

The amount of available space (i.e., available capacity and available percentage of total

capacity) on the USB storage device is also displayed.

4 File list

Displays a list of the files in the current directory.

You can click a header in the list to sort the items by that header.

Touch a file name to select the file for playback or editing.

Touch the music note icon to start and pause playback.

Files whose checkboxes are turned on will be played back-to-back during continuous playback.

The name of each file in the directory is displayed in the File Name column.

Artist information is displayed in the Artist column (MP3 files only) and the length of the

file is displayed in the Time column.

3. If you want to monitor the record source, touch the

RECORD CUE button to turn the cue on.

Setting the output

1. Drag the PLAYBACK level slider and adjust the playback

level.

2. Touch the PLAYBACK CUE button to turn the cue on.

PLAYBACK level slider

ձղ ճ

մ

յնշոչպջռս

Toolbar

Reference Manual

TF series

-

18

-

If the total number exceeds 150, including the number of folders, then the files are not

displayed in the Title list and operations

5 to C cannot be performed.

In that case, the “Recorder supports a maximum of 150 items in a folder. Please remove

some files from this folder to continue.” message is displayed (V4.0 and later).

5 Follow playback button

When this button is turned on during continuous playback, the file that is currently

playing is highlighted in the file list.

6 File information

When playing back an MP3 file, the file's bit rate and the current playback location are

displayed here.

When playing back a WAV file, the file's sample rate and the current playback location

are displayed here.

When recording, the WAV file's sample rate and the elapsed recording time are

displayed here.

7 Playback mode selector button

You can select the desired playback mode.

Touch the button to toggle through the available modes.

: SINGLE playback; the file is played and then playback stops.

: SINGLE REPEAT; the file plays repeatedly until you stop playback.

: ALL; all files with checkboxes turned on in the file list are played back one after

another, and then playback stops.

: ALL REPEAT; all files with checkboxes turned on in the file list are played back one

after another, and then playback repeats until you stop playback.

8 Previous button

Moves the playback location to the beginning of the current file or to the beginning of

the previous file.

9 Stop button

Stops playback and recording.

0 Play/pause button

Starts and pauses playback.

A Next button

Moves the playback location to the beginning of the next file.

B Record button

Sets the console to record-ready mode. If the number of audio files in a folder, including

the number of folders, exceeds 150, then the Record button is disabled.

C File name edit button

Allows you to edit the file's name.

NOTE

When an iPad or other iOS device is connected, "iOS device is connected. Use transport control on the

device." is displayed, and the playback button is not displayed. Use the corresponding app on the iOS

device to control playback.

Recording

1. Connect a compatible USB storage device to the iPad connector.

2. Touch the record button.

The record button begins flashing to indicate that the console is in record-ready mode.

3. When you're ready to start recording, touch the play/pause button.

The record button remains lit during recording.

You can touch the play/pause button to pause and resume recording.

4. When you're ready to stop recording, touch the stop button.

The recorded file is named automatically based on the console's date and time setting.

5. If necessary, touch the file name edit button and change the file name.

Toolbar

Reference Manual

TF series

-

19

-

RECORDER screen menu

Press the Menu key ( ) from the RECORDER screen to display the following items.

MONITOR screen

Allows you to manage cue and monitor signals and to control oscillators.

The CUE/MONITOR screen is used to control the signals that are monitored using

headphones and near-field monitors. Here you can select the sources that will be

continuously monitored, and select individual channels for monitoring using the CUE feature.

The OSCILLATOR screen is used to configure the oscillator and turn it on and off. The console

has a built-in oscillator that can output a sine wave or pink noise to the desired bus, allowing

you to check external devices or test the characteristics of a venue.

CUE/MONITOR screen

Allows you to monitor certain inputs using headphones or speakers. You can select which

sources will be monitored, change the monitor signal to mono, or add a delay.

1 CUE point selection buttons

Selects the point in the signal path that will be monitored.

PFL: Before the fader

AFL: After the fader (inputs are PFL only)

2 CUE mode button

Used to select the CUE mode.

Mix CUE: Enables cue for multiple channels.

Last CUE: Enables cue for the last channel selected.

Playing back files stored on a USB storage device

1. Touch the file that you want to play in the file list.

To play a file stored in a different directory, touch the parent directory button and navigate to the

desired directory.

2. Touch the playback mode selector button and

select the desired mode.

3. Touch the play button.

Playback begins.

1 Make Dir

Makes a new directory in the current directory. If

the number of audio files in a folder, including the

number of folders, exceeds 150, then the Make Dir

function is disabled.

2 Delete

Deletes the selected file.

Selected fileParent directory button

Play button

Playback mode selector button

ձ

ղ

ձղճմյն

շ

ո

չ

պջ

Toolbar

Reference Manual

TF series

-

20

-

3 PFL Trim setting text box (V3.5 and later)

Adjusts the CUE monitor volume when PFL is selected. This can be set within a range of

-30 dB to +20 dB. Touch to display the input screen for each value. (page 10)

4 Mono button

Allows you to change the monitor signal to mono.

5 Delay button

Delays the monitor signal.

6 Monitor output button

Turns the monitor output on and off.

The signal is output from the [PHONES] jack regardless of this setting.

7 Monitor level meter

Displays the monitor level.

8 Monitor level slider

Adjusts the monitor output level.

The signal is output from the [PHONES] jack regardless of this setting.

9 Clear CUE button

Cancels all cue selections.

0 Delay setting

Delay can be specified in frames (V3.5 and later), meters, feet, or ms (milliseconds).

Touch a text box to display the keyboard and enter a value. (page 10)

A Monitor selection buttons

Allow you to select the sources that will be monitored.

TF5/TF3/TF1

TF-RACK

Checking the input signals

1. Touch a CUE mode button to select

the desired cue mode.

2. Select the desired monitor sources by

touching the corresponding monitor

selection buttons.

3. Select the desired cue point by

touching the corresponding CUE

point selection button.

4. Touch the PFL Trim setting text box to

set the CUE monitor volume.

5. Touch the monitor output button to

turn the monitor output on and off.

6. Drag the monitor level slider to adjust

the monitor level.

7. Select the desired delay time.

Touch one of the delay setting text boxes to

display the keyboard. This can be specified in

frames, meters, feet or ms (milliseconds). The

frame rate can be set in the Others section of

the PREFERENCE screen. (page 26)

8. Touch the delay button.

The delay is turned on.

Monitor level

slider

Delay button

Delay setting

Tex t b oxe s

Sayfa yükleniyor ...

Yamaha TF1 Kullanım kılavuzu

Bu kılavuz için de uygundur

Yamaha TF1 Kullanım kılavuzu

Diğer dillerde

İlgili Makaleler