Labor Saving Devices EXi8 Kullanım kılavuzu

Marka: Labor Saving Devices

Model: EXi8

Kategori: Tamamlayıcı müzik ekipmanı

Tip: Kullanım kılavuzu

Bu kılavuz için de uygundur

EXo8

Owner’s Manual

Bedienungsanleitung

Mode d’emploi

Manual de instrucciones

Manuale di istruzioni

Руководство пользователя

EnglishDeutschFrançaisEspañolItalianoРусский

EXi8/EXo8 Owner’s Manual

The above warning is located on the top of the unit.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to per-

sons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and mainte-

nance (servicing) instructions in the literature

accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radia-

tors, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The

wide blade or the third prong are provided for your

safety. If the provided plug does not fit into your out-

let, consult an electrician for replacement of the

obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience recepta-

cles, and the point where they exit from the appara-

tus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table speci-

fied by the manufacturer, or

sold with the apparatus. When

a cart is used, use caution

when moving the cart/appara-

tus combination to avoid injury

from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Ser-

vicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate nor-

mally, or has been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

EXi8/EXo8 Owner’s Manual

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifi-

cations not expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could

void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these require-

ments provides a reasonable level of assurance that your

use of this product in a residential environment will not result

in harmful interference with other electronic devices. This

equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the

users manual, may cause interference harmful to the opera-

tion of other electronic devices. Compliance with FCC regu-

lations does not guarantee that interference will not occur in

all installations. If this product is found to be the source of

interference, which can be determined by turning the unit

“

OFF” and “ON”, please try to eliminate the problem by using

one of the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distrib-

ute this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America,

Electronic Service Division, 6600 Orangethorpe Ave, Buena

Park, CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park,

Calif. 90620

Telephone : 714-522-9011

Type of Equipment : I/O Expander

Model Name : EXi8/EXo8

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including

interference that may cause undesired operation.

See user manual instructions if interference to radio reception

is suspected.

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

(FCC DoC)

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

WARNING: THIS APPARATUS MUST BE EARTHED IMPOR-

TANT. The wires in this mains lead are coloured in accor-

dance with the following code:

GREEN-AND-YELLOW : EARTH

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying the

terminals in your plug proceed as follows:

The wire which is coloured GREEN-and-YELLOW must be

connected to the terminal in the plug which is marked by the

letter E or by the safety earth symbol or colored GREEN or

GREEN-and-YELLOW.

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

(3 wires)

이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서

사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습

니다.

(class b korea)

EXi8/EXo8 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from

electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited

to, the following:

• Do not place the power cord near heat sources such as heaters or radiators,

and do not excessively bend or otherwise damage the cord, place heavy

objects on it, or place it in a position where anyone could walk on, trip over,

or roll anything over it.

• Only use the voltage specified as correct for the device. The required

voltage is printed on the name plate of the device.

• Use only the supplied power cord/plug.

If you intend to use the device in an area other than in the one you

purchased, the included power cord may not be compatible. Please check

with your Yamaha dealer.

• Check the electric plug periodically and remove any dirt or dust which may

have accumulated on it.

• Be sure to connect to an appropriate outlet with a protective grounding

connection. Improper grounding can result in electrical shock.

• This device contains no user-serviceable parts. Do not open the device or

attempt to disassemble the internal parts or modify them in any way. If it

should appear to be malfunctioning, discontinue use immediately and have

it inspected by qualified Yamaha service personnel.

• Do not expose the device to rain, use it near water or in damp or wet

conditions, or place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such

as water seeps into the device, turn off the power immediately and unplug

the power cord from the AC outlet. Then have the device inspected by

qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item may

fall over and cause a fire.

• When one of the following problems occurs, immediately turn off the power

switch and disconnect the electric plug from the outlet. Then have the

device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the device.

• If this device should be dropped or damaged, immediately turn off the

power switch, disconnect the electric plug from the outlet, and have the

device inspected by qualified Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or

damage to the device or other property. These precautions include, but are not limited to, the following:

• When removing the electric plug from the device or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the device is not to be used

for extended periods of time, or during electrical storms.

• Do not place the device in an unstable position where it might accidentally

fall over.

• Do not block the vents. This device has ventilation holes at the front and

sides to prevent the internal temperature from becoming too high. In

particular, do not place the device on its side or upside down. Inadequate

ventilation can result in overheating, possibly causing damage to the

device(s), or even fire.

• Do not place the device in a location where it may come into contact with

corrosive gases or salt air. Doing so may result in malfunction.

• Keep device away from the reach of children.

• Before moving the device, remove all connected cables.

• When setting up the device, make sure that the AC outlet you are using is

easily accessible. If some trouble or malfunction occurs, immediately turn

off the power switch and disconnect the plug from the outlet. Even when the

power switch is turned off, electricity is still flowing to the product at the

minimum level. When you are not using the product for a long time, make

sure to unplug the power cord from the wall AC outlet.

• If the device is mounted in an EIA standard rack, carefully read the section

“Precautions for rackmounting” on page 10. Inadequate ventilation can

result in overheating, possibly causing damage to the device(s),

malfunction, or even fire.

Power supply/Power cord

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/Power cord

Location

PA_en_1 1/2

EXi8/EXo8 Owner’s Manual

• Before connecting the device to other devices, turn off the power for all

devices. Before turning the power on or off for all devices, set all volume

levels to minimum.

• Remove the power plug from the AC outlet when cleaning the device.

• Do not insert your fingers or hands in any gaps or openings on the device

(vents).

• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into

any gaps or openings on the device (vents). If this happens, turn off the

power immediately and unplug the power cord from the AC outlet. Then

have the device inspected by qualified Yamaha service personnel.

• Do not rest your weight on the device or place heavy objects on it, and

avoid use excessive force on the buttons, switches or connectors.

Always turn the power off when the device is not in use.

NOTICE

To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the notices

below.

 Handling and Maintenance

• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the

device, TV, or radio may generate noise.

• Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or in

a car during the day), in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the internal

components.

• Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel.

• When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impreg-

nated wiping cloths.

• Condensation can occur in the device due to rapid, drastic changes in ambient temperature—when the device is moved from

one location to another, or air conditioning is turned on or off, for example. Using the device while condensation is present can

cause damage. If there is reason to believe that condensation might have o

ccurred, leave the device for several hours without

turning on the power until the condensation has completely dried out.

• When turning on the AC power in your audio system, always turn on the power amplifier LAST, to avoid speaker damage.

When turning the power off, the power amplifier should be turned off FIRST for the same reason.

Information

 About this manual

• The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those

on your device.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective com-

panies.

European Models

Inrush Current based on EN 55103-1:2009

1A (on initial switch-on)

1A (after a supply interruption of 5s)

Conforms to Environments: E1, E2, E3 and E4

Connections

Maintenance

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed.

PA_en_1 2/2

EXi8/EXo8 Owner’s Manual

Contents

PRECAUTIONS.............................................. 4

Getting Started.............................................. 6

Features.......................................................... 6

Parameter settings of EXi8/EXo8.................... 6

Firmware Updates........................................... 6

Included items (please check)......................... 6

Controls and Connectors............................. 7

Front Panel...................................................... 7

Rear Panel ...................................................... 8

Setup.............................................................10

Precautions for rackmounting.........................10

Euroblock plug connection .............................10

Initializing the EXi8/EXo8 ...............................11

Troubleshooting...........................................12

Alert list ........................................................13

Appendix ..................................................... 90

Specifications................................................ 90

Input (EXi8) / Output (EXo8)

Characteristics ........................................... 91

Dimensions ................................................... 92

Getting Started

Thank you for purchasing the Yamaha Input

Expander EXi8/Output Expander EXo8. This man-

ual will help you take full advantage of the superior

functionality offered by the EXi8/EXo8. After you

have read the manual, keep it in a safe place for ref-

erence when needed.

Support for the newly-developed “YDIF” digital

audio transmission format

“YDIF” is a digital audio transmission format that uses an

Ethernet cable to send and receive up to 16 channels of audio

and word clock. Up to eight YDIF devices (maximum of seven

for the EXi8 and/or EXo8) can be connected to expand the

number of input/output channels available for one system.

Enormous installation flexibility with compact 1U

chassis

The EXi8 is an input expansion unit and the EXo8 is an output

expansion unit. The expansion unit can be installed to locations

where only either input or output is required.

To make the EXi8/EXo8 parameter settings, use the system’s

dedicated application software (MTX Editor: available for Win-

dows OS only). The dedicated application software makes it

easy to design a system and make (or adjust) its settings, result-

ing in the creation of an overall system design. The dedicated

application software and manuals can be downloaded from the

following web site.

http://www.yamahaproaudio.com/global/en/

To update the firmware of the unit, you must use the system’s

dedicated application software. For details on firmware updates,

refer to the following web site.

http://www.yamahaproaudio.com/global/en/downloads/

• EXi8/EXo8 Owner’s Manual (this document)

• Power cable

• Euroblock plugs (3-pin, with tab, 5.08mm pitch) (8)

• Cable ties (8)

Features

Parameter settings of EXi8/EXo8

NOTE

In order to view the downloaded manuals, Adobe Reader must

be installed in your computer. If you don’t have Adobe Reader,

please access the Adobe Corporation’s website at the following

URL, and download Adobe Reader (free of charge).

http://www.adobe.com/

Firmware Updates

Included items (please check)

EXi8/EXo8 Owner’s Manual

Controls and Connectors

q [INPUT PEAK] indicators 1–8 (EXi8)

These indicators will light red when the input level of the

corresponding INPUT channel is -3 dBFS or higher.

w [INPUT SIGNAL] indicators 1–8 (EXi8)

These indicators will light green when the input level of the

corresponding INPUT channel is -40 dBFS or higher.

When a problem or abnormality occurs in the unit, the indi-

cator that corresponds to the appropriate alert number will

flash in green together with the flashing front panel

[ALERT] indicator.

e [OUTPUT SIGNAL] indicators 1–8 (EXo8)

These indicators will light green when the output level of the

corresponding OUTPUT channel is -40 dBFS or higher.

When a problem or abnormality occurs in the unit, the indi-

cator that corresponds to the appropriate alert number will

flash in green together with the flashing front panel

[ALERT] indicator.

r [ALERT] indicator

When a problem or abnormality occurs in the unit, this indi-

cator will flash in red and at the same time the [INPUT SIG-

NAL] or [OUTPUT SIGNAL] indicator that corresponds to

the alert number will flash in green. For explanations of the

alerts, refer to the “Alert list” on page 13.

t [POWER] indicator

This indicator will light when this device is powered-on.

y [NETWORK] indicator

This indicator will light green if a link is established with an

external device via the rear panel NETWORK connector

(page 9). It will flash while data is being sent or received.

u [YDIF] indicator

This indicator will light green if the rear panel [YDIF IN]

connector (page 9) is correctly connected to the [YDIF

OUT] connector of another device.

i Power switch

This is the power switch. The power is on if the switch is in

the position. The power is off if the switch is in the

position.

Front Panel

r t iyq w

r t iy u

EXi8

EXo8

Alert number

Example: When a problem related to alert number “3” occurs

NOTE

• Do not cycle the power switch in rapid succession. Wait at

least 6 seconds before turning the power switch on after it

has been turned off. Failing to observe this precaution

may cause malfunctions.

•Even when the power switch is turned off, a small amount

of current is flowing through the unit. If you plan not to use

the unit for a long period of time, remove the power cable

from the AC outlet.

Controls and Connectors

EXi8/EXo8 Owner’s Manual

q Ground screw

The supplied power cord has a three-prong plug that will

ground the device when plugged into an appropriately

grounded three-prong type AC mains outlet. In some cases,

you may be able to reduce hum or interference by also con-

necting this screw to ground.

w AC IN connector

Use the included power cord to supply power to this connec-

tor. First, connect the power cord to this device, and then

insert the power cord plug into the AC outlet.

e [UNIT ID] rotary switch

This switch specifies the ID by which EXi8/EXo8 units are

individually distinguished in the MTX system network. You

must specify the ID avoiding duplicates among the MTX

series, XMV series and the EXi8/EXo8 within the same net-

work.

DIP switches 1 and 2 described in r specify the upper digit,

and this rotary switch specifies the lower digit, together

allowing you to set the UNIT ID to one of 63 possibilities in

the range of 01 to 3F.

r DIP switches

These switches enable you to specify the settings related to

the startup operation of the EXi8/EXo8.

Refer to the following for details.



Switches 1–2 (UNIT ID)

These switches specify the upper digit and the above-

mentioned [UNIT ID] rotary switch specifies the lower

digit, together allowing you to specify one of 63 different

UNIT ID numbers in a range from 01 to 3F.



Switch 3

This switch is for future expansion. Set this to its upward

position.



Switches 4–5 (REMOTE)

Settings of these switches are not necessary. Set these to

their upward position.

Rear Panel

q wery uti

* Illustration shows EXi8.

NOTE

The EXi8/EXo8 has some connectors that are shaped identically

but have a completely different function (e.g., NETWORK connec-

tor, [YDIF] connector). Make the appropriate connections as

instructed by the explanation for each connector. Otherwise, you

risk damaging your equipment.

NOTE

• Do not use a UNIT ID of “00” (DIP switches 1 and 2

upward and the rotary switch at 0).

•You’ll need to restart the device after changing the setting

of the [UNIT ID] rotary switch.

NOTE

Set the DIP switches while the power to the unit is turned

OFF. Otherwise, the setting will not be effective.

Switch Status

Represent a status with switch toggled up.

Represent a status with switch toggled

down.

Switch position

Option Functions

UNIT ID is

“0x”

The [UNIT ID] rotary switch

will have a setting range of

01 through 0F.

UNIT ID is

“1x”

The [UNIT ID] rotary switch

will have a setting range of

10 through 1F.

UNIT ID is

“2x”

The [UNIT ID] rotary switch

will have a setting range of

20 through 2F.

UNIT ID is

“3x”

The [UNIT ID] rotary switch

will have a setting range of

30 through 3F.

NOTE

Do not use a UNIT ID of “00” (DIP switches 1 and 2

upward and the rotary switch at 0).

Switch position

Option Function

NATIVE

Enables remote control with

the supported devices.

Controls and Connectors

EXi8/EXo8 Owner’s Manual

 Switch 6 (IP SETTING)

This switch specifies how the EXi8/EXo8’s IP address

will be specified.



Switches 7–8 (START UP MODE)

These specify whether the EXi8/EXo8 will be initialized

when it is powered-on.

t NETWORK connector

This is an Ethernet connector that supports AutoMDI/MDI-

X. It enables communication via a network switch with an

MTX network or external controller. Use a CAT5e or better

Ethernet STP cable (shielded twisted pair cable).

y [YDIF] connectors

These connectors are used to make a ring connection with

the devices that comprise the system, allowing digital audio

signals to be transmitted and received. Use CAT5e or better

Ethernet STP cables (shielded twisted pair cables) that have

all eight pins connected in a straight connection. The maxi-

mum cable length between devices is 30 meters, and you can

connect up to total seven EXi8 and EXo8 devices. For

details, refer to the user’s manual of the corresponding appli-

cation software.

u [INPUT] connectors (EXi8)

[OUTPUT] connectors (EXo8)

These are balanced input/output connectors for analog audio

input and output. Connect line level devices or microphones

to the [INPUT] connectors, and line level devices to the

[OUTPUT] connectors. The [INPUT] connectors provide

head amps, and can also provide +48V phantom power. The

system’s dedicated application software is used to specify

the gain of the internal head amps and to turn the phantom

power on/off.

Use the included Euroblock plugs to make connections (see

“Euroblock plug connection” on page 10 for details).

i Cooling vent

The EXi8/EXo8 contains a cooling fan. The cooling air is

exhausted here, so please be careful not to block this vent.

Switch position

Option Functions

UNIT ID

The IP address will be

specified according to the

UNIT ID, and will be

192.168.0.(UNIT ID).

The IP address will be

determined by the settings

of the system’s application

software. (See the user’s

manual of the correspond-

ing application software.)

NOTE

Set this to the “UNIT ID” position the first time you con-

nect this device to a computer after purchase. After

specifying the IP address from the system’s dedicated

application software, change this switch to the “PC” posi-

tion.

Switch position

Option Functions

RESUME

This is the normal operating

mode. When you power-on

the EXi8/EXo8, it will start

up in the same state in

which it was when the

power was turned off.

INITIALIZE

Initializes the EXi8/EXo8,

returning it to the factory-set

state (page 11).

NOTE

Adjusting the internal head amp gain between +17 dB and

+18 dB will internally turn PAD on/off. Noise may occur if

there is an impedance difference between the Hot and Cold

of a device connected to the [INPUT] connectors while

phantom power is being used.

Cooling vent

EXi8/EXo8 Owner’s Manual

Setup

This device is guaranteed to operate at an ambient temperature

of 0 to 40 °C. If this device is mounted in an EIA rack together

with other devices, heat from the various devices may cause the

temperature inside the rack to rise, rendering this device unable

to perform to its full potential. To ensure that heat does not

accumulate inside this device, please ensure that the following

conditions are met when rack-mounting it.

• If you plan to mount this device together with devices that

tend to generate heat, such as power amps, allow 1U or more

of vacant space between this device and other devices. (How-

ever, you do not need larger than 1U space with the MTX

series or XMV series.) Also attach ventilation panels in this

space or leave them open to ensure sufficient ventilation.

• Leave the back of the rack open, and allow at least 10 cm of

space between the rack and the wall or ceiling to ensure suf-

ficient ventilation. If the back of the rack cannot be left open,

provide forced air cooling for the rack, for example by

installing a commercially available fan kit. If you install a

fan kit, leaving the back of the rack closed may provide more

effective cooling. For details, refer to the owner’s manual

provided with the rack or fan kit.

Use the included Euroblock plugs when making connections to

the [INPUT]/[OUTPUT] connectors.

1. Loosen the terminal screws.

2. Insert cables.

3. Securely tighten the terminal screws.

Pull the cables (not too strongly) to confirm that they are

securely connected.

4. Use the included cable ties to fasten the cable

to the tab.

Precautions for rackmounting

Euroblock plug connection

Cable preparation

• Use stranded wire for Euroblock connections, and strip

the wire as shown in the illustration. With a Euroblock

connection, the stranded wire may be prone to break-

age because of metal fatigue due to the weight of the

cable or due to vibration. Cables connected to the

[INPUT]/[OUTPUT] connectors should be fastened to

the tab of the Euroblock plug (3-pin) using the included

cable ties (see illustration at right). When rack-mount-

ing the device, use a lacing bar when possible to bun-

dle and secure the cable.

•If cables will be frequently connected and discon-

nected, as in the case of a portabl

e system, we recom-

mend that you use ferrules with insulation sleeves. Use

a ferrule w hose conductor portion has an external

diameter of 1.6 mm or less and a length of approxi-

mately 7 mm such as the AI 0,5 - 6 WH made by the

Phoenix Contact corporation.

approx. 7 mm

approx. 20 mm

NOTE

Do not tin (plate with solder) the stranded wire.

1.6 mm or less

approx. 7 mm

NOTE

Use a slotted screwdriver with a blade width of 3 mm or

less.

NOTE

Trim off the extra portion of the cable tie as necessary.

Loosen

Slotted screwdriver

Terminal screw

Euroblock plug

Tab

3 mm or less

–

Setup

EXi8/EXo8 Owner’s Manual

5. Plug the Euroblock plug into the [INPUT] con-

nector of the EXi8 or the [OUTPUT] connector

of the EXo8.

Here’s how to initialize the EXi8/EXo8’s internal memory,

restoring it to the factory settings.

1. Power-off the EXi8/EXo8.

2. Set the rear panel DIP switches 7 and 8 to the

“INITIALIZE” position.

3. Power-on the EXi8/EXo8.

Initialization will start.

The status of execution is shown by the [ALERT], [NET-

WORK], and [YDIF] indicators on the front panel.

• During initialization:

The [NETWORK] indicator and the [YDIF] indicator

will flash rapidly.

• Initialization completed:

The [NETWORK] indicator and the [YDIF] indicator

will flash slowly.

• Initialization failed:

The [ALERT] indicator will flash.

4. When initialization is completed, power-off the

EXi8/EXo8 once again.

5. Set the rear panel DIP switches 7 and 8 to the

“RESUME” position.

6. Power-on the EXi8/EXo8 again.

The EXi8/EXo8 will start up in its factory-set state.

NOTE

When connecting unbalanced cables to the [INPUT] con-

nector, use a jumper wire to connect the “-” and “G” of the

Euroblock.

–

Initializing the EXi8/EXo8

CAUTION

Do not turn off the power to the EXi8/EXo8 during ini-

tialization. Otherwise, a malfunction may occur

NOTE

If initialization failed, contact Yamaha representatives /

authorized distributors to have the device inspected. A list of

Yamaha representatives / authorized distributors appears

near the end of this manual.

EXi8/EXo8 Owner’s Manual

Troubleshooting

An FAQ (frequently asked questions) list is at the Yamaha Pro Audio web site (http://www.yamahaproaudio.com/).

Symptom Possible cause, and action

The device does not turn on, or

the panel LEDs do not light up.

Connect the power cord properly.

Make sure that the power switch is turned on.

If the power still does not turn on, contact your Yamaha dealer.

Cannot exchange data between

the EXi8/EXo8 and system’s dedi-

cated application software.

(EXi8/EXo8 is not shown in the

dedicated application software)

Is the NETWORK connector on the EXi8/EXo8 properly connected to your computer?

Have you specified the correct UNIT ID using the [UNIT ID] rotary switch and DIP switches 1 and 2

on the rear panel? Could the UNIT ID be conflicting with another device?

Set the rear panel DIP switch 6 (IP SETTING) to “UNIT ID” so that the IP address will be automati-

cally assigned according to the UNIT ID.

No audio input is present.

([INPUT SIGNAL] indicator does

not light)

Connect the cable properly.

Make sure that a signal from an external devic

e is being input.

Set the gain of the internal head amplifier or external head amplifier to an appropriate level.

No audio is output.

([OUTPUT SIGNAL] indicator

does not light)

Could the output level be lowered?

In the system’s dedicated application software, could the channel’s ON button be turned off?

Is the signal routing specified correctly?

Have settings such as patch, gain or level in the system’s dedicated application software been made

correctly?

[YDIF] indicator does not light

Did you use an appropriate cable to make proper YDIF connections between the EXi8/EXo8 and

other devices in the system? Also, is the power to the YDIF-connected devices turned on?

The [ALERT] indicator is flashing

An error has occurred. The [INPUT SIGNAL] indicator or the [OUTPUT SIGNAL] indicator that cor-

responds to the alert number flashes; refer to the “Alert list” on page 13 to determine the problem

and take appropriate action.

EXi8/EXo8 Owner’s Manual

Alert list

Flashing [SIGNAL]

indicator

(alert number)

Meaning Response

1 The device has not started up correctly.

Turn the power off, then turn on after waiting at least 6 seconds. If this

does not solve the problem, please initialize the memory. Should this

also fails, contact your Yamaha dealer.

The current preset saved in internal

memory has been lost.

Recall the preset. If this does not solve the problem, contact your

Yamaha dealer.

The word clock master has become

unlocked.

Make sure that the word clock signal is being input correctly.

There is a problem with the connection

of the [YDIF IN] connector.

Make sure that YDIF cables are properly connected.

Use cables that meet the required specifications.

Duplicate IP addresses. Change the IP addresses or UNIT ID so that there are no duplicates.

IP address was not set within 60 sec-

onds of startup.

Please check rear panel DIP switch 6 (IP SETTING). If DIP switch 6 is

set to “PC,” use the system’s dedicated application software or the

DHCP server

to specify the dev ice IP address.

Too many devices are connected to the

network.

Reduce the number of devices connected to the network.

The UNIT ID is set to “00.” Set the UNIT ID to something other than “00.”

Devices with identical UNIT IDs were

found connected within the same net-

work.

Change the UNIT ID so that there are no duplicates.

EXi8/EXo8 Owner’s Manual

Appendix

 Specifications

Product specifications

Dimensions (W x H x D) 480(W) x 44(H) x 351(D)mm, 1U

Weight 4.3 kg

Power supply voltage

Japan: 100V 50/60Hz

US/Canada: 110V–240V 50/60Hz

Others: 100V–240V 50/60Hz

Power consumption 25 W max.

Heat dissipation (per hour) 21.5 kcal max.

Operating temperature range 0 °C–40 °C

Storage temperature range -20 °C–60 °C

NC value 24 (1m from the front panel)

Maximum number of simulta-

neously usable devices

A total of seven EXi8 and EXo8 devices. (However in a system, a total of up to 20 devices, including

devices such as the MTX series and XMV series, can be used.)

Power cord length 2.5m

Included items Power cord, Euroblock plugs (3-pin, tabbed) x 8, cable ties x 8, Owne

r’s manual

Electrical specifications

Sampling frequency 48kHz/44.1kHz

Signal delay Less than 2.5ms

Frequency response 20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max.

Total harmonic distortion Less than 0.05% (+4dBu, Gain:-6dB); less than 0.1% (+4dBu, Gain:+66dB)

Dynamic range 107dB (Gain:-6dB)

Equivalent input noise (EIN) -126dBu (Gain: +66dB)

Crosstalk / Channel separation -100dB (@1kHz)

Maximum cable length [YDIF] connector: 30 meters (Cable length between devices)

Indicators

INPUT PEAK (EXi8): RED -3dBFS

INPUT SIGNAL (EXi8): GREEN -40dBFS

OUTPUT SIGNAL (EXo8): GREEN -40dBFS

Phantom power (EXi8)+48V (per channel; individually settable)

Connector specifications

Format NETWORK connector: 100Base-TX

Cable specifications

[YDIF] connector: CAT5e or better Ethernet STP cable (Straight connected. All 8 pins must be connected.)

NETWORK connector: CAT5e or better Ethernet STP cable

Appendix

EXi8/EXo8 Owner’s Manual

 Input (EXi8) / Output (EXo8) Characteristics

ANALOG INPUT CHARACTERISTICS (EXi8)

• In these specifications, 0dBu = 0.775 Vrms.

• All input AD converters are 24bit linear, 128times oversampling.

•+48V DC (phantom power) is supplied to INPUT Euroblock connectors via each individual software controlled switch.

ANALOG OUTPUT CHARACTERISTICS (EXo8)

• In these specifications, 0dBu = 0.775 Vrms.

• All output DA converters are 24bit, 128times oversampling. (Fs=48kHz)

* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or

modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in

every locale, please check with your Yamaha dealer.

* Die technischen Daten und Beschreibungen in dieser Bedienungsanleitung dienen nur der Information. Yamaha Corp. behält sich das

Recht vor, Produkte oder deren technische Daten jederzeit ohne vorherige Ankündigung zu verändern oder zu modifizieren. Da die tech-

nischen Daten, das Gerät selbst oder Sonderzubehör nicht in jedem Land gleich sind, setzen Sie sich im Zweifel bitte mit Ihrem Yamaha-

Händler in Verbindung.

* Les caractéristiques techniques et les descriptions du mode d’emploi ne sont données que pour information. Yamaha Corp. se réserve le

droit de changer ou modifier les produits et leurs caractéristiques techniques à tout moment sans aucun avis. Du fa

it que les caractéristi-

ques techniques, les équipements et les options peuvent différer d’un pays à l’autre, adressez-vous au distributeur Yamaha le plus pro-

che.

* Las especificaciones y descripciones de este manual del propietario tienen sólo el propósito de servir como información. Yamaha Corp.

se reserva el derecho a efectuar cambios o modificaciones en los productos o especificaciones en cualquier momento sin previo aviso.

Puesto que las especificaciones, equipos u opciones pueden no ser las mismas en todos los mercados, solicite información a su distri-

buidor Yamaha.

* Le specifiche e le descrizioni presenti in questo manuale sono fornite a fini puramente informativi. Yamaha Corp. si riserva il diritto di

modificare prodotti o specifiche in qualsiasi momento senza preavviso. Dato che le specifiche, le apparecchiature o le opzioni possono

essere diverse da paese a paese, verificarle con il proprio rappresentante Yamaha.

* Технические характеристики и их описания в данном руководстве пользователя предназначены только для общего

сведения. Корпорация Yamaha сохраняет за собой право модифицировать свои изделия и менять их технические

характеристики без предварительного уведомления. Поскольку технические характеристики, оборудование и набор

возможностей могут зависеть от региона, обращайтесь за информацией к местному представителю корпорации Yamaha.

Input

Terminals

GAIN

Actual Load

Impedance

For Use With

Nominal

Input Level

Connector

Nominal Max. before clip

INPUT 1–8

+66dB

10kΩ

50–600Ω Mics

& 600Ω Lines

-62dBu (0.616mV) -42dBu (6.16mV)

Euroblock (Balanced)

(5.08mm pitch)

-6dB +10dBu (2.45V) +30dBu (24.5V)

Output Terminals

Actual Source

Impedance

For Use With

Nominal

Output Level

Connector

Nominal Max. before clip

OUTPUT 1–8 75Ω 10kΩ Lines +4dBu (1.23 V) +24dBu (12.3V)

Euroblock (Balanced)

(5.08mm pitch)

Appendix

EXi8/EXo8 Owner’s Manual

 Dimensions

430

480

351

355

352

Unit: mm

EXi8/EXo8 Owner’s Manual

(weee_eu_en_01)

(weee_eu_de_01)

(weee_eu_fr_01)

(weee_eu_es_01)

(weee_eu_it_01)

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not

be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your

national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human

health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or

the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your deale

r or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask

for the correct method of disposal.

Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte

Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten benutzte elektrische

Geräte nicht mit dem normalen Haushaltsabfall entsorgt werden.

In Übereinstimmung mit Ihren nationalen Bestimmungen und den Richtlinien 2002/96/EC bringen Sie alte Geräte bitte zur fachgerechten

Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen.

Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle Ressourcen zu schützen, und verhindern mögliche negative

Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Müllentsorgung auftreten könnten.

Für weit

ere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte kontaktieren Sie bitte Ihre örtliche Stadt- oder

Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel.

[Information für geschäftliche Anwender in der Europäischen Union]

Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren Händler oder Zulieferer für weitere Informationen.

[Entsorgungsinformation für Länder außerhalb der Europäischen Union]

Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausrangieren möchten, kontaktieren Sie bitte Ihre ört-

lichen Behörden oder Ihren Händler und fragen Sie nach der sachgerechten Entsorgungsmethode.

Information concernant la Collecte et le Traitement des déchets d’équipements électriques et électroniques.

Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés ne doi-

vent pas être mélangés avec les déchets domestiques habituels.

Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques, veuillez les

déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives 2002/96/EC.

En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauvegarde de pré-

cieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lor

s d'un traitement inappro-

prié des déchets.

Pour plus d'informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques, veuillez contac-

ter votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les produits.

[Pour les professionnels dans l'Union Européenne]

Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques veuillez contacter votre vendeur ou fournis-

seur pour plus d'informations.

[Information sur le traitement dans d'autres pays en dehors de l'Union Européenne]

Ce symbole est seulement valable dans l'Union Européenne. Si vous souhaitez vous débarr

asser de déchets d’équipements électriques

et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement appropriée.

Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo

Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usa-

dos no deben ser mezclados con desechos hogareños corrientes.

Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de

acuerdo a su legislación nacional y las directivas 2002/96/EC.

Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto negativo sobre

la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos.

Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio de gestión

de residuos o el punto de venta en el cual usted adquir

ió los artículos.

[Para usuarios de negocios en la Unión Europea]

Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor para mayor informa-

ción.

[Información sobre la Disposición en otros países fuera de la Unión Europea]

Este símbolo sólo es válido en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autoridades locales y

pregunte por el método correcto de disposición.

Informazioni per gli utenti sulla raccolta e lo smaltimento di vecchia attrezzatura

Questo simbolo sui prodotti, sull’imballaggio e/o sui documenti che li accompagnano significa che i prodotti elettrici ed elettronici non

dovrebbero essere mischiati con i rifiuti domestici generici.

Per il trattamento, recupero e riciclaggio appropriati di vecchi prodotti, li porti, prego, ai punti di raccolta appropriati, in accordo con la Sua

legislazione nazionale e le direttive 2002/96/CE.

Smaltendo correttamente questi prodotti, Lei aiuterà a salvare risorse preziose e a prevenire alcuni potenziali effetti negativi sulla salute

umana e l'ambiente, che altrimenti potrebbero sorgere dal trattamento improprio dei rifiuti.

Per ulteriori informazioni sulla raccolta e il riciclaggio di vecchi prodotti, prego contatti la Sua amministrazione comunale locale, il Suo ser-

vizio di smaltimento dei rifiuti o il punto vendita dove Lei ha acquistato gli articoli.

[Per utenti imprenditori dell'Unione europea]

Se Lei desidera disfarsi di attrezzatura elettrica ed elettronica, prego contatti il Suo rivenditore o fornitore per ulteriori informazioni.

[Informazioni sullo smaltimento negli altri Paesi al di fuori dell'Unione europea]

Questo simb

olo è val

id0 solamente nell'Unione Europea. Se Lei desidera disfarsi di questi articoli, prego contatti le Sue autorità locali o il

rivenditore e richieda la corretta modalità di smaltimento.

EXi8/EXo8 Owner’s Manual

For details of products, please contact your nearest Yamaha

representative or the authorized distributor listed below.

Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou

au distributeur le plus proche de vous figurant dans la liste suivante.

Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten

Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen

Bestimmungsländern erhältlich.

Para detalles sobre productos, contacte su tienda Yamaha más

cercana o el distribuidor autorizado que se lista debajo.

HEAD OFFICE

Yamaha Corporation, Audio Products Sales and Marketing Division

Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650

CANADA

Yamaha Canada Music Ltd.

135 Milner Avenue, Toronto, Ontario,

M1S 3R1, Canada

Tel: 416-298-1311

U.S.A.

Yamaha Corporation of America

6600 Orangethorpe Avenue, Buena Park, CA 90620,

U.S.A.

Tel: 714-522-9011

MEXICO

Yamaha de México, S.A. de C.V.

Av. Insurgentes Sur 1647 Piso 9, Col. San José

Insurgentes, Delegación Benito Juárez, México,

D.F., C.P. 03900

Tel: 55-5804-0600

BRAZIL

Yamaha Musical do Brasil Ltda.

Rua Joaquim Floriano, 913 - 4º andar, Itaim Bibi,

CEP 04534-013 São Paulo, SP. BRAZIL

Tel: 011-3704-1377

ARGENTINA

Yamaha Music Latin America, S.A.,

Sucursal Argentina

Olga Cossettini 1553, Piso 4 Norte,

Madero Este-C1107CEK

Buenos Aires, Argentina

Tel: 011-4119-7000

VENEZUELA

Yamaha Music Latin America, S.A.,

Sucursal Venezuela

C.C. Manzanares Plaza P4

Ofic. 0401- Manzanares-Baruta

Caracas Venezuela

Tel: 58-212-943-1877

PANAMA AND OTHER LATIN

AMERICAN COUNTRIES/

CARIBBEAN COUNTRIES

Yamaha Music Latin America, S.A.

Torre Banco General, Piso No.7, Marbella,

Calle 47 y Aquilino de la Guardia,

Ciudad de Panamá, República de Panamá

Tel: +507-269-5311

THE UNITED KINGDOM/IRELAND

Yamaha Music Europe GmbH (UK)

Sherbourne Drive, Tilbrook, Milton Keynes,

MK7 8BL, U.K.

Tel: 01908-366700

GERMANY

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: 04101-3030

SWITZERLAND/LIECHTENSTEIN

Yamaha Music Europe GmbH

Branch Switzerland in Zürich

Seefeldstrasse 94, 8008 Zürich, Switzerland

Tel: 044-387-8080

AUSTRIA/BULGARIA

Yamaha Music Europe GmbH Branch Austria

Schleiergasse 20, A-1100 Wien, Austria

Tel: 01-60203900

CZECH REPUBLIC/HUNGARY/

ROMANIA/SLOVAKIA/SLOVENIA

Yamaha Music Europe GmbH

Branch Austria (Central Eastern Europe Office)

Schleiergasse 20, A-1100 Wien, Austria

Tel: 01-60203900

POLAND/LITHUANIA/LATVIA/ESTONIA

Yamaha Music Europe GmbH

Branch Poland Office

ul. Wrotkowa 14 02-553 Warsaw, Poland

Tel: 022-500-2925

MALTA

Olimpus Music Ltd.

The Emporium, Level 3, St. Louis Street Msida

MSD06

Tel: 02133-2144

NETHERLANDS/BELGIUM/

LUXEMBOURG

Yamaha Music Europe Branch Benelux

Clarissenhof 5-b, 4133 AB Vianen, Netherlands

Tel: 0347-358 040

FRANCE

Ya m a h a M u si c E u ro p e

7 rue Ambroise Croizat, Zone d'activites Pariest,

77183 Croissy-Beaubourg, France

Tel: 01-64-61-4000

ITALY

Yamaha Music Europe GmbH, Branch Italy

Viale Italia 88, 20020 Lainate (Milano), Italy

Tel: 02-935-771

SPAIN/PORTUGAL

Yamaha Music Europe GmbH Ibérica, Sucursal

en España

Ctra. de la Coruna km. 17,200, 28231

Las Rozas (Madrid), Spain

Tel: +34-91-639-88-88

GREECE

Philippos Nakas S.A. The Music House

147 Skiathou Street, 112-55 Athens, Greece

Tel: 01-228 2160

SWEDEN/FINLAND/ICELAND

Yamaha Music Europe GmbH Germany filial

Scandinavia

J. A. Wettergrensgata 1, Box 30053

S-400 43 Göteborg, Sweden

Tel: +46 31 89 34 00

DENMARK

Yamaha Music Europe GmbH, Tyskland – filial

Denmark

Generatorvej 6A, DK-2730 Herlev, Denmark

Tel: 44 92 49 00

NORWAY

Yamaha Music Europe GmbH Germany -

Norwegian Branch

Grini Næringspark 1, N-1361 Østerås, Norway

Tel: 67 16 78 00

RUSSIA

Yamaha Music (Russia) LLC.

Room 37, bld. 7, Kievskaya street, Moscow,

121059, Russia

Tel: 495 626 5005

OTHER EUROPEAN COUNTRIES

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: +49-4101-3030

Ya m a h a M u si c G u l f FZ E

Office JAFZA 16-512, P.O.Box 17328,

Jebel Ali - Dubai, UAE

Tel: +971-4-881-5868

TURKEY

Yamaha Music Europe GmbH

Merkezi Almanya Türkiye İstanbul Şubesi

Maslak Meydan Sokak No:5 Spring Giz Plaza

Bağımsız Böl. No:3, 34398 Şişli İstanbul

Tel: +90-212-999-8010

CYPRUS

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: 04101-3030

OTHER COUNTRIES

Ya m a h a M u si c G u l f FZ E

Office JAFZA 16-512, P.O.Box 17328,

Jebel Ali - Dubai, U.A.E

Tel: +971-4-881-5868

THE PEOPLE’S REPUBLIC OF CHINA

Yamaha Music & Electronics (China) Co.,Ltd.

2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,

Shanghai, China

Tel: 021-6247-2211

INDIA

Yamaha Music India Pvt. Ltd.

Spazedge building, Ground Floor, Tower A, Sector

47, Gurgaon- Sohna Road, Gurgaon, Haryana, India

Tel: 0124-485-3300

INDONESIA

PT. Yamaha Musik Indonesia (Distributor)

Yamaha Music Center Bldg. Jalan Jend. Gatot

Subroto Kav. 4, Jakarta 12930, Indonesia

Tel: 021-520-2577

KOREA

Yamaha Music Korea Ltd.

8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,

Kangnam-Gu, Seoul, Korea

Tel: 02-3467-3300

MALAYSIA

Yamaha Music (Malaysia) Sdn., Bhd.

No.8, Jalan Perbandaran, Kelana Jaya, 47301

Petaling Jaya, Selangor, Malaysia

Tel: 03-78030900

SINGAPORE

Yamaha Music (Asia) Private Limited

Block 202 Hougang Street 21, #02-00,

Singapore 530202, Singapore

Tel: 65-6747-4374

TAIWAN

Yamaha Music & Electronics Taiwan Co.,Ltd.

3F, No.6, Section 2 Nan-Jing East Road, Taipei,

Taiwan R.O.C.

Tel: 02-2511-8688

THAILAND

Siam Music Yamaha Co., Ltd.

3, 4, 15 and 16th floor, Siam Motors Building,

891/1 Rama 1 Road, Wangmai,

Pathumwan, Bangkok 10330, Thailand

Tel: 02-215-2622

VIETNAM

Yamaha Music Vietnam Company Limited

15th Floor, Nam A Bank Tower, 201-203 Cach

Mang Thang Tam St., Ward 4, Dist.3,

Ho Chi Minh City, Vietnam

Tel: +84-8-3818-1122

OTHER ASIAN COUNTRIES

Yam ah a C o r p o r at i o n

Sales & Marketing Division

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2312

AUSTRALIA

Yam ah a M us ic A us tr al ia Pt y. L td .

Level 1, 99 Queensbridge Street, Southbank,

Victoria 3006, Australia

Tel: 3-9693-5111

COUNTRIES AND TRUST

TERRITORIES IN PACIFIC OCEAN

Yam ah a C o r p o r at i o n

Sales & Marketing Division

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2312

NORTH AMERICA

CENTRAL & SOUTH AMERICA

EUROPE

AFRICA

MIDDLE EAST

ASIA

OCEANIA

PA3 6

Owner’s Manual

Bedienungsanleitung

Mode d’emploi

Manual de instrucciones

Manuale di istruzioni

Руководство пользователя

EnglishDeutschFrançaisEspañolItalianoРусский

Yamaha Pro Audio global web site

http://www.yamahaproaudio.com/

Yamaha Manual Library

http://www.yamaha.co.jp/manual/

ZG06180

C.S.G., PA Development Division

310YJHD-B0

Printed in China

Labor Saving Devices EXi8 Kullanım kılavuzu

Marka: Labor Saving Devices

Model: EXi8

Kategori: Tamamlayıcı müzik ekipmanı

Tip: Kullanım kılavuzu

Bu kılavuz için de uygundur

EXo8

PDF İndir

rapor

Diğer dillerde

español: Labor Saving Devices EXi8 Manual de usuario
français: Labor Saving Devices EXi8 Manuel utilisateur
italiano: Labor Saving Devices EXi8 Manuale utente
svenska: Labor Saving Devices EXi8 Användarmanual
čeština: Labor Saving Devices EXi8 Uživatelský manuál
polski: Labor Saving Devices EXi8 Instrukcja obsługi
Deutsch: Labor Saving Devices EXi8 Benutzerhandbuch
português: Labor Saving Devices EXi8 Manual do usuário
English: Labor Saving Devices EXi8 User manual
dansk: Labor Saving Devices EXi8 Brugermanual
русский: Labor Saving Devices EXi8 Руководство пользователя
suomi: Labor Saving Devices EXi8 Ohjekirja
Nederlands: Labor Saving Devices EXi8 Handleiding
română: Labor Saving Devices EXi8 Manual de utilizare

Labor Saving Devices EXi8 Kullanım kılavuzu

Bu kılavuz için de uygundur

Labor Saving Devices EXi8 Kullanım kılavuzu

Diğer dillerde

Diğer Belgeler