Yamaha DVX-1000 El kitabı

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY. LTD.

LEVEL 1, 99 QUEENSBRIDGE STREET, SOUTHBANK, VIC 3006, AUSTRALIA

©

G

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

DVX-1000

(DVR-1000 + NX-SW1000 + NX-P1000)

Printed in China 3139 245 28702

DVX-1000

En

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean

place with at least 10 cm on the top, 10 cm on the left and

right, and 10 cm at the back of DVR-1000 and at least 1 m

above, 30 cm behind and on both sides of NX-SW1000 for

adequate ventilation. — away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold.

3 Locate this unit away from other electrical appliances, motors,

or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from

cold to hot, nor locate this unit in an environment with high

humidity (i.e., a room with a humidifier) to prevent

condensation inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit in a location where foreign objects

may fall onto this unit or where this unit may be exposed to

liquid dripping or splashing. On the top of this unit, do not

place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall, spilling

the liquid and causing an electrical shock to the user and/

or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain,

etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit,

and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections

are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use excessive force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall outlet,

grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using this unit

with a higher voltage than specified is dangerous and may

cause fire, damage to this unit, and/or personal injury.

Yamaha will not be held responsible for any damage resulting

from use of this unit with a voltage other than as specified.

13 To prevent damage by lightning, keep the power cord out and

outdoor antennas disconnected from a wall outlet or the unit

during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed. The

cabinet should never be opened for any reason.

15

When not planning to use this unit for long periods of time (i.e.,

vacation), disconnect the AC power plug from the wall outlet.

16 Be sure to read the “Troubleshooting” section on common

operating errors before concluding that this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set the unit

in standby mode, then disconnect the AC power plug from the

wall outlet.

18 Condensation will form when the surrounding temperature

changes suddenly. Disconnect the power cable from the

outlet, then leave the unit alone.

19 When using the unit for a long time, the unit may become

warm. Turn the power off, then leave the unit alone for

cooling.

20 Install this unit near the AC outlet and where the AC power

plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such as

sunshine, fire or like.

22 Excessive sound pressure from earphones and headphones

can cause hearing loss.

Caution: read this before operating your unit.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet,

even if this unit itself is turned off. This state is called

the standby mode. In this state, this unit is designed to

consume a very small quantity of power.

Laser component in this product is capable of emitting

radiation exceeding the limit for Class 1.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

This symbol mark is according to the

EU directive 2002/96/EC.

This symbol mark means that electrical

and electronic equipment, at their end-

of-life, should be disposed of separately

from your household waste.

Please act according to your local rules

and do not dispose of your old products

with your normal household waste.

This product complies with the radio interference

requirements of the European Community.

This product complies with the

requirements of the following directives

and guidelines: 2006/95/EC + 2004/

108/EC

1 En

1

2

3

4

5

6

7

English

Introduction................................................ 2

Main unit......................................................... 4

Supplied accessories........................................ 4

Functional overview .................................. 5

Top and front panels (DVR-1000).................. 5

Rear panel (DVR-1000).................................. 6

Rear panel (NX-SW1000)............................... 7

Remote control

(For DVR-1000).......................................... 8

Connections ............................................. 10

Roles and layout of the speakers................... 10

System connections................................ 11

Connecting the speakers................................ 11

Other connections ................................... 14

Connecting a TV........................................... 14

Connecting an HDMI component................. 15

Connecting the FM/AM antennas................. 17

Connecting external AV components ........... 18

Connecting a digital audio component.......... 19

Connecting a USB device ............................. 19

Getting started ......................................... 20

Inserting batteries into the remote control .... 20

Using the remote control............................... 20

Setting a TV .................................................. 21

Setting language preferences......................... 23

Setting speaker channels............................... 24

Disc operation.......................................... 25

Playing discs.................................................. 25

Basic playback controls................................. 25

Selecting various repeat shuffle functions .... 26

Other operations for video playback

(DVD/VCD/SVCD) .................................. 27

Playing MP3/WMA/JPEG/DivX® discs ...... 29

Special features for picture disc playback..... 30

Using a USB device ...................................... 31

DVD setup menu options........................ 33

Menu overview.............................................. 33

General setup menu....................................... 34

Audio setup menu.......................................... 36

Video setup menu.......................................... 37

Preference setup menu................................... 41

Tuner operations..................................... 44

Tuning radio stations ..................................... 44

Presetting radio stations................................. 44

Receiving Radio Data System stations (Europe

and Russia models only)............................ 45

Sound controls ........................................ 47

Using the Virtual Surround function............. 47

Setting music enhancer.................................. 47

Night listening mode ..................................... 48

Adjusting the treble/bass level....................... 48

Adjusting the volume level............................ 48

Other functions........................................ 49

Switching to standby mode ........................... 49

Dimming the display screen .......................... 49

Setting the sleep timer ................................... 49

Recording on an external AV component ..... 49

Troubleshooting...................................... 50

Glossary................................................... 53

Specifications.......................................... 55

Index......................................................... 56

(at the end of this manual)

LIST OF LANGUAGE CODES...................... i

LASER INFORMATION ............................... ii

Contents

1. INTRODUCTION

2. PREPARATION

3. BASIC OPERATION

4. OPERATIONS

5. ON-SCREEN MENU

6. OTHER FEATURES

7. ADDITIONAL INFORMATION

APPENDIX

2 En

INTRODUCTION

Thank you for purchasing this unit. This Owner’s Manual

explains the basic operation of this unit.

Notes about discs

– This receiver is designed for use with the following

discs: DVD-Video, Video CD, Super Video CD,

Audio CD, CD-R, CD-RW, DVD+RW, DVD+R,

DVD-R, DVD-RW and DVD-RW (VR format).

This receiver can play:

– MP3 and picture (Kodak, JPEG) files recorded on

CD-R/RW, DVD-R/RW and DVD+R/RW.

– JPEG/ISO 9660 format

– Maximum 30 character display

–DivX

®

disc on CD-R[W]/DVD+R[W]/

DVD-R[W](3.11, 4.x and 5.x)

– CD-R, CD-RW and DVD-RW (VR format) cannot

be played unless finalized.

– Some discs cannot be played depending on the

recording conditions, such as the PC environment

and application software. The characteristics and

condition of some discs; materials, scratches,

curvature, etc. may result in playback failure.

– Be sure to use only CD-R/RW, DVD-R/RW and

DVD+R/RW discs made by reliable manufacturers.

– Do not use any non-standard shaped discs (heart-

shaped, etc.).

– Do not use discs with tape, seals, or paste on their

surface. Doing so may damage this receiver.

– Do not use discs affixed with labels printed by a

commercially available label printer.

Cleaning discs

– When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center out. Do not

wipe in a circular motion.

– Do not use solvents such as benzine, thinner,

commercially available cleaners, or antistatic spray

intended for analog records.

Avoid high temperatures, moisture, water

and dust

– Do not expose the system, batteries or discs to

humidity, rain, sand or excessive heat (caused by

heating equipment or direct sunlight).

Avoid condensation problem

– The lens may cloud over when the receiver is

suddenly moved from cold to warm surroundings,

making it impossible to play a disc. Leave the

receiver in the warm environment until the moisture

evaporates.

Disc care

– Write only on the printed side of a CD-R[W]/

DVD+R[W]/DVD-R[W] and only with a soft felt-

tipped pen.

– Handle the disc by its edge; do not touch the

surface.

Cabinet care

– Use a soft cloth slightly moistened with a mild

detergent solution. Do not use a solution containing

alcohol, spirits, ammonia, or abrasives.

Choosing a suitable location

– Place the receiver on a flat, hard, and stable surface.

Introduction

Notes

3 En

Introduction

English

INTRODUCTION

1

Region codes

The unit is designed to support the Region Management

System. Check the region code number on the disc

package. If the number does not match the unit’s region

number (see the table below or the back of the unit), the

unit may be unable to play the disc.

Sound field features

Destination

Region

code of

DVR-1000

Playable

discs

Europe

model

Australia

model

Korea, Asia and

Taiwan models

Russia

model

2 2

ALL

4 4

ALL

3 3

ALL

5 5

ALL

Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic”, “MLP

Lossless” and the double-D symbol are

trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Surround” are

registered trademarks of DTS, Inc.

DivX, DivX Ultra Certified, and associated

logos are trademarks of DivX, Inc. and are used

under license.

“DCDi” is a trademark of Faroudja, a division

of Genesis Microchip, Inc.

HDMI, the HDMI logo and High Definition

Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other

limited viewing uses only unless otherwise authorized

by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

Active Servo Processing Subwoofer System with built-in

power amplifier.

This subwoofer system (NX-SW1000) employes Advanced

Yamaha Active Servo Technology which Yamaha has

developed for reproducing higher quality super-bass sound.

This super-bass sound adds a more realistic, theater-in-the-

home effect to your stereo system.

4 En

Introduction

■ Main unit ■ Supplied accessories

DVD receiver

(DVR-1000)

Subwoofer

(NX-SW1000)

Be sure to connect the power cable of the

subwoofer (NX-SW1000) to the AC outlet

before you turn on the DVD receiver (DVR-

1000). Otherwise, the subwoofer (NX-SW1000)

will not be powered correctly.

Note

Front speakers (x2)

(NX-P1000)

STANDBY/ON

EJECT

DIMMER

BASS TREBLE

ENTER

DIRECT

DVD/CD

TUNER

SURROUND

AUX

SUBTITLE

ANGLE ZOOM AUDIO

MUTE

AREA

MODE

USB

ENHANCER

NIGHT

REPEAT

ON SCREEN

MENU

SET UP

TOP MENU

/RETURN

FREQ/TEXT

MODE START

PRESET PRESET

PROG

A-B

SHUFFLE

SLEEP

PTY SEEK

Power cable

(For NX-SW1000: except

Europe and Russia models)

Power cable

(For DVR-1000)

Remote control

Batteries (x 2)

System control cable (4 m)

(For NX-SW1000)

Speaker cables (4 m x 2)

(For NX-P1000)

Video pin cable (1.4 m)

Indoor FM antenna

AM loop antenna

(Asia, Australia, Korea,

and Taiwan models only)

5 En

English

INTRODUCTION

1

■ Top and front panels (DVR-1000)

1 System display panel

Shows information about the operational status of the

unit.

2 PCM/ Digital/DTS indicator

Indicates the format of the audio being played back.

3 d VOLUME u

Adjusts the volume level.

4 INPUT

Selects input source or sets the priority level for the

audio input signals.

5 b/w, f/a

DVD/CD mode: selects the previous/next track or

chapter. Press and hold to fast forward or fast reverse.

TUNER mode: tunes the radio preset up/down.

USB mode: selects the previous/next track. Press and

hold to fast forward or fast reverse.

6 s

Exits an operation.

DVD/CD mode: stops disc playback.

TUNER mode: erases a preset radio station in Preset

mode if held more than two seconds, or stops preset

radio station installation in Auto Preset mode.

USB mode: stops playback.

7 e

DVD/CD mode: pauses disc playback.

USB mode: pauses playback.

8 h

DVD/CD mode: starts disc playback.

USB mode: starts playback.

9

Ejects a disc in the DVD receiver.

Do not push the ejected disc when reloading it. To

reload the ejected disc, press or h, or remove the

disc from the disc loading slot fully, then insert it to

the disc loading slot once again.

0 USB terminal

Connect to the USB connector of your USB device

(see page 19).

A STANDBY/ON

Turns on the DVD receiver, or sets it to the standby

mode (see “Turning the auto standby function on/off”

on page 35).

B Disc loading slot

Insert a disc to be played.

C Remote control sensor

Point the remote control towards this sensor.

D PHONES jack

Connects headphones.

E PORTABLE jack

Connects a portable audio player.

When this input source is selected, “FRONT IN”

appears on the system display panel.

Functional overview

7 8 965432

E

C

D

B

A

0

1

Note

6 En

Functional overview

■ Rear panel (DVR-1000)

(Europe model)

1 AC inlet

Connect the supplied power cable.

2 COMPONENT VIDEO OUT jacks

Connect to the Y P

B/CB PR/CR jacks on your TV (see

page 14).

3 VIDEO output jack

Connect to the video (composite) jack on your TV

(see page 14).

4 FM ANT terminal

Connect the FM antenna.

5 GND and AM ANT terminals

Connect the AM loop antenna.

6 SYSTEM CONNECTOR terminal

Connect the subwoofer.

7 OPTICAL DIGITAL IN jack

Connect to the DIGITAL OUT jack on your digital

audio component.

8 AUX IN jacks

Connect to the AUDIO OUT jacks on your VCR or

cassette deck.

9 LINE OUT jacks

Connect to the AUDIO IN jacks on your VCR.

0 S VIDEO output jack

Connect to the S-video jack on your TV or VCR.

A AV MONITOR OUT terminal

(Europe and Russia models only)

Connect to your TV (see page 14).

B HDMI terminal

Connect to the HDMI input terminal of your HDMI

component (see page 15).

SYSTEM

CONNECTOR

MAINS

TO SUBWOOFER

AUX I N

AUDI O

LINE OUT

AV MONITOR OUT

(

DVD ON LY

)

S VIDEO

VIDEO

COMPONENT

Y

P

R

PB

PCM/DTS

q

DIGITAL

OPTICAL

DIGITAL IN

VIDEO OUT

(DVD ONLY)

AM

ANT

GND

TUNER

HDMI

FM

ANT

75Ω UNBAL

L

R

L

R

98

21 4 5

67

3

B

0 A

7 En

Functional overview

English

INTRODUCTION

1

■ Rear panel (NX-SW1000)

1 SYSTEM CONNECTOR terminal

Connect to the DVD receiver.

2 SPEAKER terminals

Connect to the speakers.

3 AC power cord

Connect to a standard AC outlet.

1 SYSTEM CONNECTOR terminal

Connect to the DVD receiver.

2 SPEAKER terminals

Connect to the speakers.

3 VOLTAGE SELECTOR

Select the voltage according to your region.

4 AC inlet

Connect the supplied power cable.

SYSTEM

CONNECTOR

6

Ω

MIN. /SPEAKER

SPEAKERS

MAINS

L

R

1

3

2

SYSTEM

CONNECTOR

6

Ω

MIN. /SPEAKER

SPEAKERS

AC IN

VOLTAGE

SELECTOR

L

R

110V-120V

220V-240V

1

3

4

2

(except Europe and Russia models)(Europe and Russia models)

8 En

Functional overview

■ Remote control

(For DVR-1000)

For details on how to use the remote control, see page 20.

1 STANDBY/ON ( )

Turns on the DVD receiver, or sets it to the standby

mode.

2 Numeric keypad (0 – 9)

Enters a track/title number of the disc.

Enters a number of a preset radio station.

3 TREBLE/BASS

Selects the TREBLE (high tone) or BASS (low tone)

sound mode.

Use the VOLUME control to change the tone level.

4 REPEAT

Selects various repeat modes.

FREQ/TEXT

TUNER mode: switches the information display when

receiving Radio Data System.

5 REPEAT A-B

Repeats a specific section on a disc.

6 h

DVD/CD mode: starts disc playback.

USB mode: starts playback.

7 ON SCREEN

Displays the current status or disc information.

8 ENTER

Confirms a selection.

9 SET UP

Enters or exits the system setup menu.

0 AREA

Select either the WIDE or NARROW listening area

(see page 47).

A MODE

Select the Virtual Surround mode (see page 47).

B ENHANCER

Switches the Enhancer mode on or off (see page 47).

C SURROUND

Turns the surround effect on or off (see page 47).

D Input selection buttons

Selects the appropriate active source mode.

DVD/CD: switches to DVD/CD mode.

AUX: switches to ANALOG/FRONT IN/DIGITAL

input.

TUNER: switches to tuner (FM/AM) input.

USB: switches to USB mode. Accesses the contents of

the connected USB device or exits from the USB

mode (see page 31).

E SUBTITLE

Selects a subtitle language.

F ANGLE

Selects a DVD disc camera angle (if available).

Note

STANDBY/ON

EJECT

DIMMER

BASS TREBLE

ENTER

DIRECT

DVD/CD

TUNER

SURROUND

AUX

SUBTITLE

ANGLE ZOOM AUDIO

MUTE

AREA

MODE

USB

ENHANCER

NIGHT

REPEAT

ON SCREEN

MENU

SET UP

TOP MENU

/RETURN

FREQ/TEXT

MODE START

PRESET PRESET

PROG

A-B

SHUFFLE

SLEEP

PTY SEEK

P

Q

R

S

t

U

V

W

7

8

9

0

A

B

C

D

E

F

G

H

1

2

3

4

5

6

I

J

K

L

N

O

M

9 En

Functional overview

English

INTRODUCTION

1

G EJECT ( )

Ejects a disc in the DVD receiver.

H SLEEP

Sets the sleep timer (see page 49).

I DIMMER

Selects different levels of brightness for the display

panel (see page 49).

J NIGHT

Turns the Night listening mode on or off

(see page 48).

K s

Exits an operation.

DVD/CD mode: stops disc playback.

DVD/CD mode: holding down the button will eject

the disc.

TUNER mode: erases a preset radio station if held for

more than two seconds.

USB mode: stops playback.

L PROG

DVD/CD mode: starts programming.

TUNER mode: starts automatic/manual preset

programming if held for more than two seconds.

M SHUFFLE

Plays tracks in random order.

PTY SEEK START

TUNER mode: starts searching for a Radio Data

System station.

N e

DVD/CD mode: pauses disc playback.

USB mode: pauses playback.

PTY SEEK MODE

TUNER mode: sets the DVD receiver to the PTY

SEEK mode.

O b / a

DVD/CD mode: selects the previous/next track or

chapter. Press and hold to fast forward or fast reverse.

USB mode: selects the previous/next track. Press and

hold to fast forward or fast reverse.

d PRESET u

TUNER mode: press to select a preset radio station.

P MENU

Enters or exits the disc contents menu.

For VCD version 2.0 only:

In stop mode, turns on/off playback control (PBC)

mode.

During playback, returns to the main menu.

Q Cursors ( / / / )

Selects movement direction in the menu.

TUNER mode: press left or right to tune the radio

frequency.

TUNER mode: press up or down to select auto tuning.

R TOP MENU/RETURN

Returns to the previous menu.

Displays the top-level disc menu

(if available).

S DIRECT

Switches the video output on or off during audio disc

playback.

This function (Audio Direct) is not available for

HDMI output.

In the DIRECT mode, the display panel dims to “DIM

2 (40% brightness)”.

T VOLUME (+/–)

Adjusts the volume level.

U MUTE

Mutes or restores the volume.

V AUDIO

Selects an audio language (DVD) or an audio channel

(VCD).

W ZOOM

Enlarges or reduces the TV screen picture.

10 En

PREPARATION

■ Roles and layout of the speakers

To enjoy quality sounds you need to place the speakers in their appropriate positions and install them correctly.

The following show the recommended layout of the speakers.

For the best possible surround sound, all of the speakers (except the subwoofer) should be placed at the same distance

from the listening position.

1 Front Speakers (L, R)

Place the front left/right speakers on both sides of your TV at equal distances.

Main roles: Produces front channel (stereo) sounds and effect sounds.

2 Subwoofer

Place the subwoofer near a front speaker and turn it slightly toward the center of the room to reduce wall reflections.

Main roles: Produces bass sounds and low frequency (LFE) sounds contained in Dolby Digital or DTS.

To avoid magnetic interference, do not position the front speakers too close to your TV.

Allow adequate ventilation around the DVD receiver and subwoofer.

Bass sounds produced by the subwoofer may be heard differently depending on the listening position and subwoofer location.

To enjoy desired sounds, try to change the location of the subwoofer according to the listening position.

Connections

1

2

1

DVD receiver

Front

speaker (R)

Subwoofer

Front

speaker (L)

Note

11 En

English

PREPARATION

2

■ Connecting the speakers

– Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections

are completed.

– Be sure to connect the end of the supplied speaker cable (where the red and black cable lengths differ) to the front

speaker, and leave some slack.

– Be sure to connect the red cable to the red terminal (subwoofer and front speakers) and the black cable to the

black terminal.

System connections

Notes

SYSTEM

CONNECTOR

6

ΩMIN. /SPEAKER

SPEAKERS

MAINS

L

R

SYSTEM

CONNECTOR

MAINS

TO SUBWOOFER

AUX IN

AUDIO

LINE OUT

AV MONITOR OUT

(

DVD ONLY

)

S VIDEO

VIDEO

COMPONENT

Y

P

R

PB

PCM/DTS

q

DIGITAL

OPTICAL

DIGITAL IN

VIDEO OUT

(DVD ONLY)

AM

ANT

GND

TUNER

HDMI

FM

ANT

75Ω UNBAL

L

R

L

R

R L

Front speaker (R)

Subwoofer

DVD receiver

Front speaker (L)

System connections

12 En

Connecting the speaker cables

– Be sure to connect the end of the supplied speaker

cable (where the red and black cable lengths differ)

to the front speaker, and leave some slack.

– Be sure to connect the red cable to the red terminal

(subwoofer and front speakers) and the black cable

to the black terminal.

1 Remove approximately 10 mm (0.4 in) of insulation

from the end of each speaker cable and then twist the

exposed wires of the cable together to prevent short

circuits.

2 Loosen the knob.

3 Insert one bare wire into the hole in the center of each

terminal.

4 Tighten the knob to secure the wire.

Connecting the subwoofer

Be sure to connect the red cable to the red terminal

(subwoofer and front speakers) and the black cable to the

black terminal.

1 Remove approximately 10 mm (0.4 in) of insulation

from the end of each speaker cable and then twist the

exposed wires of the cable together to prevent short

circuits.

2 Loosen the knob.

3 Insert one bare wire into the hole on the side of each

terminal.

4 Tighten the knob to secure the wire.

Notes

10 mm (0.4 in)

Red: positive (+)

Black: negative (–)

Note

10 mm (0.4 in)

R

L

Red: positive (+)

Black: negative (–)

R

L

R

L

System connections

13 En

English

PREPARATION

2

Connecting the DVD receiver and the

subwoofer

Connect the subwoofer to the DVD receiver using the

system control cable. Attach one end to the subwoofer and

the other to the SYSTEM CONNECTOR terminal at the

rear of the DVD receiver.

– When connecting the system control cable, be sure

to insert the plug until it clicks. When

disconnecting the system control cable, slide the

collar of the plug back to unlock.

– Ensure that the speaker cables are correctly

connected. Improper connections may damage the

system due to a short-circuit.

– When connecting the speakers, fix the speaker

cables in place so that cables do not loosen. If your

foot or hand accidentally gets caught on a loose

speaker cable, the speaker may fall.

– To prevent unwanted noise, do not place the

subwoofer too close to the DVD receiver, AC

power adaptor, TV or other sources of radiation.

– Be sure to connect the power cable of the

subwoofer (NX-SW1000) to the AC outlet before

you turn on the DVD receiver (DVR-1000).

Otherwise, the subwoofer (NX-SW1000) will not

be powered correctly.

Notes

SYSTEM

CONNECTOR

MAINS

L

R

6

ΩMIN. /SPEAKER

SPEAKERS

L

R

SYSTEM

CONNECTOR

MAINS

TO SUBWOOFER

AUX IN

AUDIO

LINE OUT

AV MONITOR OUT

(

DVD ONLY

)

S VIDEO

VIDEO

COMPONENT

Y

P

R

PB

PCM/DTS

q

DIGITAL

OPTICAL

DIGITAL IN

VIDEO OUT

(DVD ONLY)

AM

ANT

GND

TUNER

HDMI

FM

ANT

75Ω UNBAL

L

R

L

R

SYSTEM

CONNECTOR

SYSTEM

CONNECTOR

NX-SW1000

14 En

■ Connecting a TV

– You only need to make one video connection from the following options (A, B, C, or D), depending on the

capabilities of your TV.

– Do not connect the power cords until all cable connections are completed.

COMPONENT VIDEO OUT jacks <A>

Use the component video cables (red/blue/green, not

supplied) to connect the DVD receiver’s Y P

B PR jacks to

the corresponding component video input jacks (or the Y

Pb/Cb Pr/Cr/ YUV jacks) on your TV.

Progressive scan video quality is only available when

using Y PB PR in conjunction with a progressive scan TV.

To activate the progressive scan function see “Progressive

function” on page 40.

VIDEO output jack <B>

Use a composite video cable (yellow -supplied) to connect

the DVD receiver’s VIDEO output jack to the video input

jack (or A/V In/Video In/Composite/Baseband jack) on

your TV.

S VIDEO output jack <C>

S (separate)-video connections achieve a clearer picture

than composite video connections. Use an S-video cable

(not supplied) to connect the DVD receiver’s

S VIDEO output jack to the S-video input jack (or Y/C or

S-VHS jack) on your TV.

AV MONITOR OUT terminal <D>

(Europe and Russia models only)

The SCART cable, or “Euro AV cable”, supports AV

MONITOR OUT signal transmission, providing you with

the best possible picture and sound. If your TV has only

one terminal for video input, and you want to connect it

directly to the DVD receiver, you can use the AV

MONITOR OUT connector. Connect one end of the

SCART cable to the AV MONITOR OUT connector and

the other end to the SCART connector on your TV.

– TV channels, if you use AV MONITOR OUT

terminal to connect the TV. To use AV MONITOR

OUT terminal, make sure to set the DVD

receiver’s component setting to “RGB” (see

page 22).

– When using AV MONITOR OUT terminal to

listen to the TV channels, set the DVD receiver’s

component setting to “RGB” (see page 22).

– S-video signal is not output at AV MONITOR

OUT terminal.

Other connections

Notes

M

O

R

AUX IN

AUDIO

LINE OUT

AV MONITOR OUT

(

DVD ONLY

)

S VIDEO

VIDEO

COMPONENT

Y

P

R

PB

PCM/DTS

q

DIGITAL

OPTICAL

DIGITAL IN

VIDEO OUT

(DVD ONLY)

L

R

L

R

TV

<A>

<C>

<D>

<B>

Notes

Other connections

15 En

English

PREPARATION

2

■ Connecting an HDMI component

HDMI (High-Definition Multimedia Interface) is the first

industry-supported, uncompressed, all-digital A/V (audio/

video) interface.

By connecting to an HDMI component (such as a TV),

you can enjoy standard, enhanced or high-definition video

as well as multi-channel digital audio using a single cable.

When used in combination with HDCP (High-bandwidth

Digital Content Protection), HDMI provides a secure

audio/video interface that meets the security requirements

of content providers and system operators.

For further information on HDMI, visit the HDMI website

at “http://www.hdmi.org/”.

Viewing and Listening to playback

from an HDMI component

1 Connect HDMI terminal of the DVD receiver to the

HDMI input terminal of your HDMI compatible

component using a commercially available HDMI

cable.

2 Select the appropriate audio output from [HDMI

AUDIO OUT] in [AUDIO SETUP PAGE] (see

page 36).

3 Select the appropriate video output from [HDMI

VIDEO] in [VIDEO SETUP PAGE] (see page 39).

– The DVD receiver is not compatible with HDCP-

incompatible HDMI or DVI components.

– You need a commercially available HDMI/DVI

conversion cable when you connect the DVD

receiver to other DVI components.

– When connecting an HDMI component, refer to

the instruction manual for the component.

– Do not disconnect or connect the HDMI cable from

the DVD receiver or turn off the power of the

HDMI/DVI component connected to the HDMI

terminal of the DVD receiver while data is being

transferred. Doing so may disrupt playback or

cause noise.

Notes

L

R

AV MONITOR OUT

(

DVD ONLY

)

AM

ANT

GND

TUNER

HDMI

FM

ANT

75Ω UNBAL

HDMI

IN

TV

DVD receiver

Other connections

16 En

HDMI audio output

*1

The audio output is automatically changed from multi-channel audio signals to downmixed stereo signals.

*2

If the connected HDMI component does not support bitstream signals (Dolby Digital, DTS, and MPEG), the audio output is

automatically changed from bitstream signals to PCM signals.

*3

If the connected HDMI component does not support multi-channel audio signals, the audio output is automatically changed from

PCM multi-channel signals to PCM stereo signals and 48 kHz/16 bits signals or less.

*4

If the connected HDMI component does not support more than 48 kHz, the audio output is automatically changed to 48 kHz/16 bits

signals or less.

You need to set [HDMI AUDIO OUT] (see page 36).

Audio format Analog output

HDMI AUDIO OUT

AUTO PCM OFF

DVD-Video

Dolby Digital Multi-

channel

Multi

*1

Dolby Digital

*2,3

PCM 2-channel Off

Stereo

Dolby Digital

2-channel

Multi

*1

/Stereo Dolby Digital

*2

DTS

Multi-channel

Multi

*1

DTS

*2,3

Stereo

DTS 2-channel Multi

*1

/Stereo DTS

*2

MPEG

Multi-channel

Multi

*1

MPEG

*2,3

Stereo

MPEG 2-channel Multi

*1

/Stereo MPEG

*2

PCM 2-channel

*4

Multi

*1

/Stereo PCM 2-channel

CD/MP3/WMA/

DivX

®

2-channel Multi

*1

/Stereo PCM 2-channel

DTS-CD

Multi-channel

Multi

*1

DTS

*2,3

Stereo

2-channel Multi

*1

/Stereo DTS

*2

VCD 2-channel Multi

*1

/Stereo PCM 2-channel

SVCD

Multi-channel

Multi

*1

MPEG

*2,3

Stereo

2-channel Multi

*1

/Stereo MPEG

*2

Note

Other connections

17 En

English

PREPARATION

2

■ Connecting the FM/AM antennas

1 Connect an AM loop antenna to the AM ANT

terminal. Place the AM loop antenna on a shelf or

attach it to a stand or wall.

2 Connect an indoor FM antenna to the FM ANT

terminal. Extend the FM antenna and fix its ends to

the wall.

For better FM stereo reception, connect an external

FM antenna.

– Adjust the position of the antennas for optimal

reception.

– Position the antennas as far as possible from your

TV, VCR or other sources of radiation to prevent

unwanted interference.

Notes

AM

ANT

GND

TUNER

HDMI

FM

ANT

75Ω UNBAL

1

2

Ground (GND terminal)

For minimum interference, connect

the antenna GND terminal to a

good earth ground. A good earth

ground is a metal stake driven into

moist earth.

FM antenna

AM loop

antenna

Other connections

18 En

■ Connecting external AV components

If you connect external AV equipment such as a VCR, cassette deck or digital audio component to the following audio

terminals on the DVD receiver, you can enjoy those audio sources with the DVD receiver. Also, you can record AV

sources played on the DVD receiver using the recording equipment. This section provides some examples of other AV

equipment connections. For information on your AV equipment, refer to the manual provided.

Viewing and listening to playback

1 Connect the DVD receiver’s VIDEO output jack to

the VIDEO IN jack on your VCR. Or, connect the

VCR to the TV as shown.

2 Connect the DVD receiver’s AUX IN jacks to the

AUDIO OUT jacks on your VCR.

Before starting operation, press AUX to select

“ANALOG” in order to activate the input source.

Using the VCR for recording DVD

playback

Some DVDs are copy-protected. You cannot record or

dub protected discs using a VCR.

1 Connect the DVD receiver’s VIDEO output jack to

the VIDEO IN jack on your VCR. Or, connect the

DVD receiver’s S VIDEO output jack to the S-

VIDEO IN jack on your VCR.

2 Connect the DVD receiver’s LINE OUT jacks to the

AUDIO IN jacks on your VCR.

This will allow you to make analog stereo (two

channels, right and left) recordings.

AUX IN

AUDIO

LINE OUT

S VIDEO

VIDEO

COMPONENT

Y

P

R

PB

/

DTS

G

ITAL

C

AL

A

L IN

VIDEO OUT

(DVD ONLY)

L

R

L

R

1

2

12

VCR (for example)

DVD receiver

TV

Sayfa yükleniyor ...

Yamaha DVX-1000 El kitabı

Yamaha DVX-1000 El kitabı

Diğer dillerde

İlgili Makaleler

Diğer Belgeler