Samsung HW-NW700 Hızlı başlangıç Kılavuzu

HW-NW700

USER MANUAL

ENG - 2

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

This symbol indicates that high voltage

is present inside. It is dangerous to

make any kind of contact with any

internal part of this product.

This symbol indicates that this product

has included important literature

concerning operation and maintenance.

Class II product : This symbol indicates

that it does not require a safety

connection to electrical earth (ground).

AC voltage : This symbol indicates that

the rated voltage marked with the

symbol is AC voltage.

DC voltage : This symbol indicates that

the rated voltage marked with the

symbol is DC voltage.

Caution, Consult instructions for use :

This symbol instructs the user to

consult the user manual for further

safety related information.

WARNING

• To reduce the risk of re or electric shock, do

not expose this appliance to rain or moisture.

CAUTION

• TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

• This apparatus shall always be connected to a

AC outlet with a protective grounding

connection.

• To disconnect the apparatus from the mains,

the plug must be pulled out from the mains

socket, therefore the mains plug shall be

readily operable.

• Do not expose this apparatus to dripping or

splashing. Do not put objects lled with

liquids, such as vases on the apparatus.

• To turn this apparatus off completely, you

must pull the power plug out of the wall

socket. Consequently, the power plug must

be easily and readily accessible at all times.

ENG - 3

PRECAUTIONS

1. Ensure that the AC power supply in your

house complies with the power

requirements listed on the identication

sticker located on the bottom of your

product. Install your product horizontally, on

a suitable base (furniture), with enough

space around it for ventilation (7~10 cm).

Make sure the ventilation slots are not

covered. Do not place the unit on ampliers

or other equipment which may become hot.

This unit is designed for continuous use. To

fully turn off the unit, disconnect the AC plug

from the wall outlet. Unplug the unit if you

intend to leave it unused for a long period of

time.

2. During thunderstorms, disconnect the AC

plug from the wall outlet. Voltage peaks due

to lightning could damage the unit.

3. Do not expose the unit to direct sunlight or

other heat sources. This could lead to

overheating and cause the unit to

malfunction.

4. Protect the product from moisture (i.e.

vases), and excess heat (e.g. a replace) or

equipment creating strong magnetic or

electric elds. Unplug the power cable from

the AC wall socket if the unit malfunctions.

Your product is not intended for industrial

use. It is for personal use only. Condensation

may occur if your product has been stored in

cold temperatures. If transporting the unit

during the winter, wait approximately

2 hours until the unit has reached room

temperature before using.

5. The battery used with this product contains

chemicals that are harmful to the

environment. Do not dispose of the battery

in the general household trash. Do not

expose the battery to excess heat, direct

sunlight, or re. Do not short circuit,

disassemble, or overheat the battery.

Danger of explosion if the battery is replaced

incorrectly. Replace only with the same or

equivalent type.

ABOUT THIS MANUAL

The user manual has two parts: this simple paper

USER MANUAL and a detailed FULL MANUAL you

can download.

USER MANUAL

See this manual for safety instructions,

product installation, components,

connections, and product specications.

FULL MANUAL

You can access the FULL MANUAL on

Samsung’s on-line customer support centre by

scanning the QR code. To see the manual on

your PC or mobile device, download the

manual in document format from Samsung’s

website. (http://www.samsung.com/support)

Design, specications, and App screen are subject to

change without prior notice.

ENG - 4

CONTENTS

01 Checking the Components 6

Inserting Batteries before using the Remote Control (AA batteries X 2) ------------------------- 6

02 Product Overview 7

Front Panel / Bottom Panel of the Soundbar ------------------------- 7

Rear Panel of the Soundbar ------------------------- 7

03 Connecting the Soundbar 8

Connecting Electrical Power

-------------------------

8

04 Connecting to a TV 9

Connecting using an Optical Cable

-------------------------

9

Connecting Wirelessly

-------------------------

10

– Connecting a TV via Bluetooth

-------------------------

10

– Connecting via Wi-Fi

-------------------------

12

05 Connecting an External Device 14

Connecting using an Optical Cable

-------------------------

14

06 Connecting a Mobile Device 15

Connecting via Bluetooth

-------------------------

15

Connecting via Wi-Fi (Wireless Network)

-------------------------

16

ENG - 5

07 Using the Remote Control 17

How to Use the Remote Control

-------------------------

17

Adjusting the Soundbar volume with a TV remote control

-------------------------

20

08 Installing the Wall Mount 21

Installation Precautions

-------------------------

21

Wallmount Components

-------------------------

21

Installation Example

-------------------------

21

09 Software Update 25

10 Troubleshooting 26

11 Licence 27

12 Open Source Licence Notice 27

13 Important Notes About Service 27

14 SpecicationsandGuide 28

Specications

-------------------------

28

ENG - 6

01 CHECKING THE COMPONENTS

VOL BASS

SOUNDBAR

SOUND

MODE

PAIR

Soundbar Main Unit Remote Control /

Batteries

AC/DC Adapter Power Cord

x 3 x 3

(M5 x L50)

Wall Mount Guide Bracket-Wall Mount Anchor / Screw

x 2

(M3 x L10)

(Optionally)

x 1

Holder-Cable Cushion Pad Holder-Dongle Screw

• For more information about the power supply and power consumption, refer to the label attached

to the product. (Label : Bottom of the Soundbar Main Unit)

• For Soundbar wall mounting components, see page 21.

• To purchase additional components or optional cables, contact a Samsung Service Centre or

Samsung Customer Care.

• This Soundbar is for wall mounting only.

• Use the Holder-Dongle Screw to secure the Holder-Dongle when connecting the Soundbar to the

Wireless Rear Speaker Kit (SWA-9000S) or Wireless Subwoofer (SWA-W700) (Sold separately).

Please see the FULL MANUAL for details.

Inserting Batteries before using the Remote Control (AA batteries X 2)

Slide the battery cover in the direction of the arrow

until it is completely removed. Insert 2 AA batteries

(1.5V) oriented so that their polarity is correct. Slide

the battery cover back into position.

ENG - 7

02 PRODUCT OVERVIEW

Front Panel / Bottom Panel of the Soundbar

Display

Power

Volume

󰟳

Bottom Panel

Position the product so that the SAMSUNG logo is located on the top.

Rear Panel of the Soundbar

DIGITAL AUDIO IN

(OPTICAL)

DC 23V

WIRELESS

ID SET

(WOOFER/REAR)

NETWORK

DIGITAL AUDIO IN

(OPTICAL)

DC 23V

WIRELESS

ID SET

(WOOFER/REAR)

NETWORK

󰟷 󰟸

󰟴

󰟵

󰟶

󰟳

Source

Selects the source input mode. (D.IN / WIFI / BT)

• To turn on “BT PAIRING” mode, change the source to “BT” mode, and then press and

hold the button on the bottom panel for more than 5 seconds.

󰟴

D.IN Connect to the digital (optical) output of an external device.

󰟵

WIRELESS

Attach the wireless dongle that connects the Soundbar to surround speakers and a

subwoofer wirelessly. (The surround speaker, subwoofer, and wireless dongle are sold

separately.)

󰟶

DC 23V Connect the AC/DC power adapter. (Power Supply In)

󰟷

NETWORK Press to connect to a wireless network (Wi-Fi) via the SmartThings app.

󰟸

ID SET

Press to connect the Soundbar to surround speakers and a subwoofer wirelessly.

• Press and hold the Up button on the remote for 5 seconds to complete ID SET.

ENG - 8

03 CONNECTING THE SOUNDBAR

Connecting Electrical Power

Use the power components (1, 2) in the following order to connect the Soundbar to an electrical outlet:

1

Connect the power output cable to the power adapter, and then to the Soundbar.

2

Connect the power cord to a wall socket.

See the illustrations below.

• For more information about the required electrical power and power consumption, refer to the

label attached to the product. (Label : Bottom of the Soundbar Main Unit)

DIGITAL AUDIO IN

(OPTICAL)

DC 23V

WIRELESS

NETWORK

DC 23V

Rear of the Soundbar

Main Unit

1

AC/DC Adapter

2

Power Cord

Connecting

Electrical Power

• Make sure to rest the AC/DC

Adapter at on a table or the oor.

If you place the AC/DC Adapter so

that it is hanging with the AC cord

input facing upwards, water or

other foreign substances could

enter the Adapter and cause the

Adapter to malfunction.

ENG - 9

04 CONNECTING TO A TV

Hear TV sound from your Soundbar through wired or wireless connections.

• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using

the TV’s remote control.

– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when

you connect the Soundbar to the TV using an optical cable.

– This function also allows you to use the TV menu to adjust the sound eld and various settings

as well as the volume and mute.

Connecting using an Optical Cable

When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on

your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on

the TV is changed, you will experience better sound quality. (The TV menu may use different words for

Dolby Digital and PCM depending on the TV manufacturer.)

DIGITAL AUDIO IN

(OPTICAL)

DC 23V

WIRELESS

OPTICAL OUT

Optical Cable

(not supplied)

Rear of the Soundbar

D.IN

󰟳

Bottom of the Soundbar

󰟴

1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV

with a digital optical cable (not supplied).

2. Press the button on the bottom panel or on the remote control, and then select the “D.IN”

mode.

ENG - 10

Auto Power Link

Auto Power Link automatically turns on the Soundbar when the TV is turned on.

1. Connect the Soundbar and a TV with a digital optical cable (not supplied).

2. Press the Left button on the remote control (the blue spot in the illustration

to the right) for 5 seconds to turn Auto Power Link on or off.

• Auto Power Link is set to ON by default.

(To turn off this function, press the Left button on the remote for 5 seconds.)

• Depending on the connected device, Auto Power Link may not function.

• This function is only available in the “D.IN” mode.

Connecting Wirelessly

Connecting a TV via Bluetooth

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

• Only one TV can be connected at a time.

SOUND

MODE

PAIR

OR

Bottom of the Soundbar

The initial connection

1. Press the

VOL WOOFER

SOUND

MODE

PAIR

button on the remote control to enter the “BT PAIRING” mode.

(OR)

a. Press the button on the bottom panel and then select “BT”.

“BT” changes to “BT READY” in a few seconds automatically if there is no Bluetooth device

connected to the Soundbar.

b. When “BT READY” appears, press and hold the button on the bottom panel of the

Soundbar for more than 5 seconds to display “BT PAIRING”.

2. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)

3. Select “[AV] Samsung Soundbar NWxxx” from the list on the TV’s screen.

An available Soundbar is indicated with “Need Pairing” or “Paired” in the TV Bluetooth device list.

To connect the TV to the Soundbar, select the message, and then establish a connection.

• When the TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display.

4. You can now hear TV sound from the Soundbar.

ENG - 11

If the device fails to connect

• If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar NWxxx”) appears in the

list, delete it.

• Then repeat steps 1 through 3.

Disconnecting the Soundbar from the TV

Press the button on the bottom panel or on the remote control and switch to any mode but “BT”.

• Disconnecting takes time because the TV must receive a response from the Soundbar.

(The time required may differ, depending on the TV model.)

• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the

button

on the remote control for 5 seconds with the Soundbar in “BT READY” status. (Toggle On → Off)

What is the difference between BT READY and BT PAIRING?

• BT READY : In this mode, you can search for previously connected TVs or connect a previously

connected mobile device to the Soundbar.

• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the

VOL WOOFER

SOUND

MODE

PAIR

button on

the remote control or press and hold the button on the Bottom of the Soundbar for more than

5 seconds while the Soundbar is in

“BT”

mode.)

NOTES

– If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

– In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the

Soundbar and the Bluetooth device exceeds 10 meters.

– The Soundbar automatically turns off after 5 minutes in the Ready state.

– The Soundbar may not perform Bluetooth search or connection correctly under the following

circumstances:

– If there is a strong electrical eld around the Soundbar.

– If several Bluetooth devices are simultaneously paired with the Soundbar.

– If the Bluetooth device is turned off, not in place, or malfunctions.

– Electronic devices may cause radio interference. Devices that generate electromagnetic waves

must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

ENG - 12

Connecting via Wi-Fi

Pre-connection Checklist

1. Conrm that your Samsung Smart TV was released after 2014. This function is compatible only

with Samsung Smart TVs released after 2014.

2. Make sure your Wireless router (Wi-Fi) is ready and working.

3. Make sure that the TV is connected to the Wireless router (your Wi-Fi network).

Bottom of the Soundbar

Step 1 : Connecting the Soundbar to Wi-Fi

1. Press the button on the Bottom of the Soundbar or on the remote control to select “WIFI”

mode.

• When using selected Samsung TVs (2016 ~ 2018 Samsung Smart TVs that support Bluetooth.)

– If you select “WIFI” mode when the TV is turned on, the TV screen displays a pop-up

window providing instructions on how to automatically connect the Soundbar to a wireless

router (Wi-Fi). Refer to instructions in the pop-up window of the TV.

Bottom of the Soundbar

WIFI

2. Connect your mobile device (smartphone, tablet, etc.) to the Wi-Fi network the TV is connected to.

ENG - 13

3. Install and launch the SmartThings app on your mobile device (smartphone, tablet, etc.).

SmartThings app

iOSAndroid

4. Follow the instructions in the app screen on the mobile device to connect the Soundbar to your

Wi-Fi network.

Step2:ConguringSettingsontheTV

• If the TV disconnects from your wireless network after you change the input source to the

Soundbar, use the TV menu to connect the TV to the network again.

For TVs released in 2018

Home ( )  Settings ( )  Sound  Sound Output  [AV] Samsung Soundbar NWxxx (Wi-Fi)

For TVs released in 2017

Home ( )  Settings ( )  Sound  Sound Output  [AV] Samsung Soundbar NWxxx (Wi-Fi)

For TVs released in 2016

Home ( )  Settings ( )  Sound  Select Speaker  [AV] Samsung Soundbar NWxxx (Wi-Fi)

For TVs released in 2015

Menu  Sound  Speaker List

For TVs released in 2014

Menu  Sound  Speaker Settings  Multiroom Link - Settings

NOTES

– The TV and Soundbar must be connected to the same wireless network (Wi-Fi).

– If your wireless router (Wi-Fi) uses a DFS channel, you will not be able to establish a Wi-Fi

connection between the TV and Soundbar. Contact your Internet service provider for details.

– If the 5GHz Wi-Fi connection is not smooth, use the 2.4GHz bandwidth.

– Because the menus may differ depending on the year of manufacture, refer to your TV manual.

ENG - 14

05 CONNECTING AN EXTERNAL DEVICE

Connect to an external device via a wired or wireless network to play the external device’s sound

through the Soundbar.

Connecting using an Optical Cable

Bottom of the Soundbar

󰟴

DIGITAL AUDIO IN

(OPTICAL)

DC 23V

WIRELESS

OPTICAL OUT

Optical Cable

(not supplied)

Rear of the Soundbar

D.IN

BD / DVD player / Set-top box /

Game console

󰟳

1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source

Device using a digital optical cable (not supplied).

2. Select “D.IN” mode by pressing the button on the bottom panel or on the remote control.

ENG - 15

06 CONNECTING A MOBILE DEVICE

Connecting via Bluetooth

When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of

cabling.

• You cannot connect more than one Bluetooth device at a time.

SOUND

MODE

PAIR

OR

Bottom of the Soundbar

Bluetooth device

The initial connection

1. Press the

VOL WOOFER

SOUND

MODE

PAIR

button on the remote control to enter the “BT PAIRING” mode.

(OR)

a. Press the button on the bottom panel and then select “BT”.

“BT” changes to “BT READY” in a few seconds automatically if there is no Bluetooth device

connected to the Soundbar.

b. When “BT READY” appears, press and hold the button on the bottom panel of the

Soundbar for more than 5 seconds to display “BT PAIRING”.

2. On your device, select “[AV] Samsung Soundbar NWxxx” from the list that appears.

• When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] → “BT”

appears in the front display.

3. Play music les from the device, connected via Bluetooth, through the Soundbar.

If the device fails to connect

• If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar NWxxx”) appears in the

list, delete it.

• Then repeat steps 1 and 2.

NOTE

– After you have connected the Soundbar to your mobile device the rst time, use the “BT READY”

mode to reconnect. See Page 11 for details.

For more information about Bluetooth connections, refer to “Connecting a TV via

Bluetooth” on pages 10~ 11.

ENG - 16

Connecting via Wi-Fi (Wireless Network)

• Connect a single Soundbar to Wi-Fi to access a variety of music streaming services and Internet

radio. Connect multiple Soundbars to Wi-Fi to use grouped playback or the stereo sound mode.

• To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the SmartThings app is

required.

Bottom of the Soundbar

Mobile device

The initial connection

1. Press the button on the Bottom of the Soundbar or on the remote control to select “WIFI”

mode.

Bottom of the Soundbar

WIFI

2. Install and launch the SmartThings app on your mobile device (e.g. smartphone or tablet).

SmartThings app

iOSAndroid

3. Follow the instructions in the app screen on the mobile device to connect the Soundbar to Wi-Fi.

NOTES

– Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit

(SWA-9000S) and Subwoofer (SWA-W700) to your Soundbar.

– The SWA-9000S and SWA-W700 are sold separately.

– To learn about using the SmartThings app and connecting to other devices (e.g. Amazon,

the SWA-9000S and SWA-W700), refer to the FULL MANUAL for your Soundbar on the Samsung

web site (www.samsung.com/support).

ENG - 17

07 USING THE REMOTE CONTROL

How to Use the Remote Control

VOL BASS

SOUNDBAR

SOUND

MODE

PAIR

󰟳

󰟴

󰟵

󰟶

󰟷

󰟹

󰟸

󰟺

󰟼

󰟻

󰟳

Power

VOL WOOFER

SOUND

MODE

PAIR

Turns the Soundbar on and off.

󰟴

VOL WOOFER

SOUND

MODE

PAIR

Source

Press to select a source connected to the

Soundbar.

󰟵

Mute

VOL WOOFER

SOUND

MODE

PAIR

Press the

VOL WOOFER

SOUND

MODE

PAIR

button to mute the sound.

Press it again to unmute the sound.

󰟶

SOUND MODE

VOL WOOFER

SOUND

MODE

PAIR

You can select the desired sound effect by

choosing STANDARD, SURROUND, or SMART.

󰟷

VOL WOOFER

SOUND

MODE

PAIR

Bluetooth

PAIR

Press the

VOL WOOFER

SOUND

MODE

PAIR

button. “BT PAIRING” appears in

the Soundbar’s display.

You can connect the Soundbar to a new

Bluetooth device in this mode by selecting the

Soundbar in the Bluetooth device's search list.

ENG - 18

󰟸

Play / Pause

(BT/Wi-Fi)

Press the button to pause a music le temporarily.

When you press the button again, the music le plays.

󰟹

VOL WOOFER

SOUND

MODE

PAIR

Up/Down/

Left/Right

Press the indicated areas to select Up/Down/Left/Right.

Press Up/Down/Left/Right on the button to select or set functions.

• Repeat

To use the Repeat function, press the Up button.

• Music Skip

Press the Right button to select the next music le. Press the Left button to select the

previous music le.

• Auto Power Link

You can turn Auto Power Link on or off.

– Auto Power Link : If the Soundbar is connected to your TV through a digital optical

cable, the Soundbar can automatically turn on when you turn on your TV. Press

and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF.

– Auto Power Link is set to ON by default.

• ID SET

Press and hold the Up button for 5 seconds to complete ID SET (when connecting to an

accessary item).

󰟺

Sound Control

VOL WOOFER

SOUND

MODE

PAIR

You can select from TREBLE, SYNC, REAR LEVEL, or REAR SPEAKER ON/OFF.

• To adjust the TREBLE volume, select Sound Control → TREBLE, and then use the

Up/Down buttons to adjust the volume within a -6 to +6 range.

• If the video on the TV and audio from the Soundbar are not synchronised, select SYNC

in Sound Control, and then set the audio delay between 0~300 milliseconds by using

the Up/Down buttons.

• If surround speakers (not supplied) are connected, select REAR LEVEL, and then use

the Up/Down buttons to adjust the volume within a -6 to +6 range.

The REAR SPEAKER function can be turned ON/OFF by using the Up/Down buttons.

• SYNC is only supported for some functions.

ENG - 19

󰟻

VOL WOOFER

SOUND

MODE

PAIR

BASS

SOUND

MODE

VOL

BASS

SOUNDBAR

SOUND

MODE

VOL

BASS

SOUNDBAR

SOUND

MODE

VOL

BASS

SOUNDBAR

SOUND

MODE

VOL

BASS

SOUNDBAR

Push the button up or down to adjust the BASS volume within a -6 to +6 range.

To set the BASS volume level to 0, press the button.

• When a Subwoofer (not supplied) is connected, the BASS button becomes the

Subwoofer button. Push the button up or down to adjust the subwoofer volume either

to -12 or within a -6 to +6 range. To set the subwoofer volume level to 0, press the

button.

󰟼

VOL WOOFER

SOUND

MODE

PAIR

VOL

SOUND

MODE

VOL

BASS

SOUNDBAR

SOUND

MODE

VOL

BASS

SOUNDBAR

SOUND

MODE

VOL

BASS

SOUNDBAR

SOUND

MODE

VOL

BASS

SOUNDBAR

Push the button up or down to adjust the volume.

• Mute

Press the VOL button to mute the sound. Press it again to unmute the sound.

ENG - 20

Adjusting the Soundbar volume

with a TV remote control

If you have a Samsung TV, you can adjust

the Soundbar’s volume using the IR remote

control that came with your Samsung TV.

First use the TV menu to set the TV audio on your

Samsung TV to external speakers, then use your

Samsung remote to control the Soundbar’s

volume. For more information, see the TV’s user

manual. The default mode for this function is

control by a Samsung TV remote. If your TV is not

a Samsung TV, follow the directions below to

change the settings of this function.

1. Turn Off the Soundbar.

BYE

2. If you do not want to use this function, push

up and hold the BASS button on the remote

repeatedly for 5 seconds until “OFF-TV

REMOTE” appears in the display.

SOUND

MODE

VOL

BASS

SOUNDBAR

OFF-TV REMOTE

5 Sec

3. If you want to control the Soundbar with

your TV’s remote, push up and hold the BASS

button for 5 seconds repeatedly until

“ALL-TV REMOTE” appears in the display.

Then, use your TV’s menu to select external

speakers.

SOUND

MODE

VOL

BASS

SOUNDBAR

ALL-TV REMOTE

5 Sec

4. If you want to return the Soundbar to the

default mode (control by a Samsung TV

remote), push up and hold the BASS button

for 5 seconds repeatedly until “SAMSUNG-

TV REMOTE” appears in the display.

SOUND

MODE

VOL

BASS

SOUNDBAR

SAMSUNG-TV REMOTE

5 Sec

(Default mode)

– Each time you push the BASS button up

and hold it for 5 seconds, the mode

switches in the following order:

“SAMSUNG-TV REMOTE” (Default mode)

→ “OFF-TV REMOTE” → “ALL-TV REMOTE”.

– This function may not be available,

depending on the remote control.

– For manufacturers that support this

feature, refer to the FULL MANUAL for

your Soundbar on the Samsung web site

(www.samsung.com/support).

– This volume control function works with

IR TV remotes only. It does not work with

Bluetooth TV remotes (remotes that

require pairing)

Sayfa yükleniyor ...

Samsung HW-NW700 Hızlı başlangıç Kılavuzu

Samsung HW-NW700 Hızlı başlangıç Kılavuzu

Diğer dillerde

İlgili Makaleler

Samsung HW-NW700 Hızlı başlangıç ​​Kılavuzu

Samsung HW-NW700 Hızlı başlangıç ​​Kılavuzu

Diğer dillerde

İlgili Makaleler

Samsung HW-NW700 Hızlı başlangıç Kılavuzu

Samsung HW-NW700 Hızlı başlangıç Kılavuzu