LG GL-M492GLDL Kullanici rehberi

MFL68488903

TURKISH

Express Freeze

28

Smart Diagnosis(Optional)

Hygiene Fresh(Optional)

27

26

24

23

2

14

Keep ventilation openings, in the appliance enclosure or in the built-in structure,

clear of obstruction.

In order to avoid the creation of a flammable gas air mixture if a leak in the refrigerating circuit

occurs, the size of the room in which the appliance may be sited depends on the amount of

2

refrigerant used. The room must be 1m in size for every 8g of R600a refrigerant inside the appliance.

The amount of refrigerant in your particular appliance is shown on the identification plate inside the

appliance. Never startup an appliance showing any signs of damage.If in doubt, consult your dealer.

3

When this crossed-out wheeled bin symbol is attached to a product it means the product is

covered by the European Directive 2002/96/EC.

(*NOTE - 1,2,3 are applicable for Jordan Regulations and other countries as per applicability)

All electrical and electronic products should be disposed of separately from the municipal

waste stream via designated collection facilities appointed by the government or the local

authorities.

The correct disposal of your old appliance will help prevent potential negative consensus for the

environment and human health.

For more detailed information about the disposal of your old appliances, please contact your city

office, waste disposal service or the shop where you purchased the product.

4

5

Install in places away from the fire

such as the place

where flammable

gas is leaked.

It may cause fire.

6

like gasket

7

Completely empty inside before taking

out the container from the door.

8

9

10

11

12

GL-*562/

GL-*612

GL-*492

(Factory Recommended Location)

13

3

*Refer Freezer control label inside freezer compartment

14

CONTROLS FOR REFRIGERATOR COMPARTMENT

Press ‘Hygiene Fresh’ button to operate hygiene fresh motor (optional).

0

Display ‘A’

Display ‘B’

- Press (c) button, refrigerator temperature will be down by 1 C.

- Press (d) button, refrigerator temperature will be up by 1 C.

OFF.

Power mode ON

by

Press ‘FRIDGE’ button to control refrigerator temperature.

15

EXPRESS FREEZE

When the refrigerator is first turned ON the EXPRESS

FREEZE feature can be turn ON. The compressor and

circulating fan operate at maximum cooling capacity

to quickly lower the refrigerator temperature.

It shuts off automatically.

If warm food is placed into the refrigerator, EXPRESS FREEZE can be started with the button on the control

panel. EXPRESS FREEZE will shut off when the temperature reaches the proper level or it can be

shut off manually by pressing the EXPRESS FREEZE button.

Display ‘A’

Display ‘B’

Display ‘A’

Display ‘B’

Note: This feature will be unlocked by itself,

if the refrigerator is switched off.

ICE MAKING (OPTIONAL)

16

17

(OPTIONAL)

18

SMART DIAGNOSIS (Only for Selected External Micom Models)

Smart diagnosis function is...

Use the function to contact the service center and receive precise diagnosis when the refrigerator

malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.

How to use the function

1. Close all refrigerator doors, and press and

hold display lock button to make it locked

state.

If the display is already in locked state, press and

hold lock button to reset the lock and press and

hold the lock button again to make it locked

state.

2. Press and hold fridge temperature button

for 3 seconds or longer. (All display screens

will be turned off, and in a while, 3 will be

displayed on the fridge temperature display

part.)

< Model with Hygiene Fresh Filter >

< Model without Hygiene Fresh> Filter >

3. Open all refrigerator compartment and

freezer compartment doors, and place the

telephone near the speaker hole at the top

right side.

Check if the speaking side(microphone) of the

telephone is toward the speaker hole.

4. Do not take away the telephone while data

is being transmitted.

During the data transmission for smart

diagnosis, wait with the telephone placed near

the speaker hole at the top right side. The

remaining time for data transmission is

displayed on the display screen.

5. After the completion of the data

transmission, listen to the explanation of the

consultant about the result of the smart

diagnosis.

When the data transmission is completed, along

with the display of the data transmission

completion, the refrigerator will be automatically

turned off and on a few seconds later. Listen to

the explanation of the consultant about the result

of the analyzed diagnosis and follow the

instructions.

Be aware!

Difference of the regional call qualities may have influence on the function.

If you use home phone, better communication performance will enable much better service.

Smart diagnosis data transmission may not be fluent due to call quality problem, and in such

case, smart diagnosis service may be difficult.

CAUTION

If it passes 5 minutes in locked state, smart

diagnosis function will not be activated, so be

careful.

CAUTION

The transmission sound may be irritating.

Do not take away the telephone until the sound

stops for good diagnosis.

19

1. Open all the doors of the refrigerator. If the

display is already in locked state.

2. Press the refrigerator door open detection

switch 5 times as in the figure to make the

light inside the chamber blink. (The locations

of the door open detection switches of each

model may be different, so refer to the

following figure to check the location.)

3. Place the phone near the speaker hole at

the top right side.

Check if the speaking side (microphone) of the

telephone is toward the speaker hole.

4. Do not take away the telephone while data

is being transmitted.

During the data transmission for smart

diagnosis, wait with the telephone placed near

the speaker hole at the top right side.

CAUTION

The transmission sound may be irritating.

Do not take away the telephone until the sound

stops for good diagnosis.

5. After the completion of the data

transmission, listen to the explanation of the

consultant about the result of the smart

diagnosis.

When the data transmission is completed, along

with the display of the data transmission

completion, the refrigerator will be automatically

turned off and on a few seconds later. Listen to

the explanation of the consultant about the result

of the analyzed diagnosis and follow the

instructions.

SMART DIAGNOSIS (Only for Selected Internal Micom Models)

Smart diagnosis function is...

Use the function to contact the service center and receive precise diagnosis when the refrigerator

malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.

How to use the function

Be aware!

Difference of the regional call qualities may have influence on the function.

If you use home phone, better communication performance will enable much better service.

Smart diagnosis data transmission may not be fluent due to call quality problem, and in such

case, smart diagnosis service may be difficult.

20

Sayfa yükleniyor ...

LG GL-M492GLDL Kullanici rehberi

Bu kılavuz için de uygundur

LG GL-M492GLDL Kullanici rehberi

İlgili Makaleler

Diğer Belgeler