Yamaha MDX-E300 El kitabı

MDX-E300

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

Minidisc Recorder

Lecteur Enregistreur de Minidisc

GB

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Malaysia V914100

MDX-E300

CAUTION – VISIBLE AND

/

OR INVISIBLE LASER RADIATION

WHEN OPEN. AVOID EXPOSURE TO BEAM.

VARNING – SYNLIG OCH

/

ELLER OSYNLIG LASERSTRÅLNING NÄR

DENNA DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.

VARO ! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA

/

TAI

NÄKYMÄTÖMÄLLE LASERSÄTEILYLLE.

ÄLÄ KATSO SÄTEESEEN.

VARNING – SYNLIG OCH

/

ELLER OSYNLIG LASERSTRÅLNING NÄR

DENNA DEL ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.

VORSICHT ! SICHTBARE UND

/

ODER UNSICHTBARE

LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET.

NICHT DEM STRAHL AUSSETZEN.

CLASS 1 LASER PRODUCT

LASER KLASSE 1 PRODUKT

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

VARO!

AVATTAESSA JA SUOJALUKITUS

OHITETTAESSA OLET ALTTIINA

NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ

KATSO SÄTEESEEN.

VARNING!

OSYNLIG LASERSTRÅLNING NÄR DENNA DEL

ÄR ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD.

BETRAKTA EJ STRÅLEN.

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

ATTENTION

L’emploi de commandes, de réglages ou un choix

de procédures différents des spécifications de cette

brochure peut entraîner une exposition à

d’éventuelles radiations pouvant être dangereses.

ACHTUNG

Die Verwendung von Bedienungselementen oder

Einstellungen oder die Durchführung von

Bedienungsvorgängen, die nicht in dieser Anleitung

aufgeführt sind, kann zu einem Kontakt mit

gefährlichen Laserstrahlen führen.

OBSERVERA

Användning av kontroller och justeringar eller

genomförande av procedurer andra än de som

specificeras i denna bok kan resultera i att du

utsätter dig för farlig strålning.

ATTENZIONE

Uso di controlli o regolazioni o procedure non

specificamente descritte può causare l’esposizione

a radiazioni di livello pericoloso.

PRECAUCIÓN

El uso de los controles o los procedimientos de

ajuste o utilización diferentes de los especificados

en este manual pueden causar una exposición

peligrosa a la radiación.

VOORZICHTIG

Gebruik van bedieningsorganen of instellingen, of

uitvoeren van handelingen anders dan staan

beschreven in deze handleiding kunnen leiden tot

blootstelling aan gevaarlijke stralen.

0101MDXE300(M).cv1-4.E 02.5.17, 0:02 PM1

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this unit in a well ventilated, cool, dry, clean

place away from direct sunlight, heat sources, vibration,

dust, moisture or cold. In a cabinet, allow about 2.5 cm

(1 inch) of free space all around this unit for adequate

ventilation.

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes

from cold to hot, nor locate this unit in an environment

with high humidity (i.e., a room with a humidifier) to

prevent condensation inside this unit, which may cause

an electrical shock, fire, damage to this unit, and/or

personal injury.

5 Avoid installing this unit in a location where foreign

objects may fall onto this unit or where this unit may be

exposed to liquid dripping or splashing. On the top of

this unit, do not place:

• Other components, as they may cause damage and/or

discoloration on the surface of this unit.

• Burning objects (i.e., candles), as they may cause fire,

damage to this unit, and/or personal injury.

• Containers with liquid in them, as they may fall, spilling

the liquid and causing an electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the

temperature inside this unit rises, it may cause fire,

damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use excessive force on switches, knobs and/or

cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using this

unit with a higher voltage than specified is dangerous

and may cause fire, damage to this unit, and/or personal

injury. YAMAHA will not be held responsible for any

damage resulting from use of this unit with a voltage

other than as specified.

13 To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any service

is needed. The cabinet should never be opened for any

reason.

15 When not planning to use this unit for long periods of

time (i.e., vacation), disconnect the AC power plug from

the wall outlet.

16 Be sure to read the “Troubleshooting” section on

common operating errors before concluding that this

unit is faulty.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT

17 Before moving this unit, press STANDBY/ON to set the

unit in standby mode, then disconnect the AC power

plug from the wall outlet.

18 VOLTAGE SELECTOR (China and General models

only)

The VOLTAGE SELECTOR on the rear panel of this

unit must be set for your local main voltage BEFORE

plugging into the AC main supply. Voltages are 110/120/

220/240 V AC, 50/60 Hz.

To reduce the risk of fire or electric shock, do not

expose this appliance to rain or moisture.

The unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off. This state is called the standby

mode. In this state, this unit is designed to consume a

very small quantity of power.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

The wires in the mains lead are coloured in accordance

with the following code:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows: The wire which is coloured BLUE

must be connected to the terminal which is marked

with the letter N or coloured BLACK. The wire which

is coloured BROWN must be connected to the terminal

which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described above.

Note: The plug severed from the mains lead must be

destroyed, as a plug with bared flexible cord is hazardous

if engaged in a live socket outlet.

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

0102MDXE300(M).Cau.E 02.5.17, 10:53 AM2

1

English

FEATURES

• MINI DISC digital audio system

• Digital optical input (2)/output

• Sampling rate converter

• EDIT function

CONTENTS

FEATURES .............................................. 1

SUPPLIED ACCESSORIES ....................... 2

NOTES ABOUT MINIDISCS .................... 2

NAMES OF BUTTONS AND CONTROLS

Front panel ............................................................ 3

Display .................................................................. 3

Remote control ..................................................... 4

GETTING STARTED

Remote control ..................................................... 5

System connections .............................................. 6

Connecting your audio system ............................. 8

PLAYBACK............................................. 9

Skipping tracks ..................................................... 9

Searching .............................................................. 9

Switching the display ......................................... 10

Random play ....................................................... 11

Repeat play ......................................................... 11

A-B repeat .......................................................... 11

Program play ...................................................... 12

RECORDING ........................................ 13

Adjusting recording levels .................................. 14

Track marking ..................................................... 14

Music synchro recording .................................... 15

Setting the recording mode ................................. 15

Monitor out ......................................................... 16

Protecting a recorded MD .................................. 16

EDITING ............................................... 17

Erase ................................................................... 18

Move ................................................................... 19

Combine ............................................................. 19

Divide ................................................................. 20

Undo ................................................................... 20

TOC write ........................................................... 20

FRA check .......................................................... 20

TITLING................................................ 21

ADDITIONAL INFORMATION

MD recorder system notes .................................. 22

Display messages................................................ 23

Troubleshooting .................................................. 24

Specifications...................................................... 25

• Synchronized recording/timer recording

by system connection

• Digital rec level control

• MDLP (Long play and recording)

0103MDXE300(M).1-8.E 02.5.17, 10:53 AM1

2

SUPPLIED ACCESSORIES

Check that the following items are included.

• Remote control

• Batteries (AA, R6, UM-3)

• Optical cable

• System control cable

• Audio pin cable

NOTES ABOUT MINIDISCS

Care of MDs

• Do not expose the MD to direct sunlight or heat sources

such as hot air ducts, nor leave it in a car parked in

direct sunlight as there can be a considerable rise in

temperature inside the car.

• Periodically remove dust and debris from the cartridge

surface by wiping it with a dry cloth.

• Because the MD itself is housed in a cartridge, you can

handle it normally without being concerned about dirt

or fingerprints. However, malfunctioning may result if

the cartridge itself is dirty or warped.

Do not open the shutter on the MD

cartridge

Trying to force the shutter open will damage the shutter.

TITLE

DELETE

SET

CANCEL ENTER

EDIT

CHAR

NUMBER

A B C D E F G H I J K L

1234

5678

90

+10 +100

A-B S/F

DISPLAY

POWER

SCROLL

M N O P Q R S T U V W X

Y Z

REC/

PAUSE

SYNC

/

SPACE

M-MARK REC MODE

INPUT

RANDOM PROGRAM

REPEAT

0103MDXE300(M).1-8.E 02.5.17, 10:53 AM2

3

English

NAMES OF BUTTONS AND CONTROLS

Front panel

1 STANDBY/ON (P.9)

2 Disc insertion slot (P.9)

3 (P.9)

4 & (P.9)

5 #/* (P.9)

6 REC/PAUSE (P.13)

Display

1 Input indicator (P.13)

2 TOTAL indicator (P.10)

3 DISC/TRACK indicator (P.10)

4 REMAIN indicator (P.10)

5 MANUAL indicator (P.14)

6 REC indicator (P.13)

7 Pause indicator

8 Multi information display

9 Sampling frequency indicator (P.13)

STANDBY/ON

NATURAL SOUND MINIDISC RECORDER MDX-E300

+–

INPUT

ANALOG

REC LEVEL

DIGITAL

MIN MAX

REC/PAUSE

123456

7890q

ANALOG

DIGITAL

COAX.

32 44.1 48

kHz

REPEAT

MANUAL

REC

MONO

LP2 LP4

TOC

DISC TRACK

TOTAL

REMAIN

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – ––––

OPT.12

qwer ty u90

1234567 8

0 REPEAT A-B/S F indicator (P.11)

q PROGRAM indicator (P.12)

w RANDOM indicator (P.11)

e MONO indicator (P.15)

r LP2/LP4 indicator (P.15)

t TOC indicator (P.17)

y Play indicator

u Recording level meter (P.14)

7 Remote control sensor (P.5)

8 Display (P.3)

9 INPUT (P.13)

0 ANALOG REC LEVEL (P.14)

q Jog dial ($ ›)/DIGITAL REC LEVEL

(P.9/P.14)

0103MDXE300(M).1-8.E 02.5.17, 10:53 AM3

4

Remote control

1 DELETE/CANCEL (P.21)

2 TITLE (P.21)

3 CHAR (P.21)

4 NUMBER (P.21)

5 Numbers [Characters] (P.9/P.21)

6 # (P.9/P.14)

7 ! (P.9/P.21)

8 $ (P.9/P.21)

9 REC/PAUSE (P.13)

0 M-MARK (P.14)

q REC MODE (P.15)

w RANDOM (P.11)

e PROGRAM (P.12)

r POWER (P.9)

t SET/ENTER (P.21)

y EDIT (P.18)

u * (P.9)

i ⁄ (P.9/P.21)

o › (P.9/P.21)

p SYNC (P.15)

a & (P.9)

s INPUT (P.13)

d REPEAT A-B (P.11)

REPEAT S/F (P.11)

f SCROLL (P.10)

g DISPLAY (P.10)

NAMES OF BUTTONS AND CONTROLS

TITLE

DELETE

SET

CANCEL ENTER

EDIT

CHAR

NUMBER

A B C D E F G H I J K L

1234

5678

90

+10 +100

A-B S/F

DISPLAY

POWER

SCROLL

M N O P Q R S T U V W X

Y Z

REC/

PAUSE

SYNC

/

SPACE

M-MARK REC MODE

INPUT

RANDOM PROGRAM

REPEAT

1t

y

u

i

o

p

a

s

d

f

g

2

3

4

5

6

8

9

0

q

w

e

r

7

0103MDXE300(M).1-8.E 02.5.17, 10:53 AM4

5

English

Remote control

Battery installation

1 Remove the battery compartment cover.

2 Insert batteries into the battery compartment.

3 Replace the battery compartment cover.

Battery replacement

If you find that the remote control must be used closer to

the main unit than usual, the batteries are weak. Replace

batteries with new ones.

Notes

• Use only AA, R6, UM-3 batteries for replacement.

• Be sure the polarities are correct. (See the illustration inside

the battery compartment.)

• Remove the batteries if the remote control will not be used for

an extended period of time.

• If batteries leak, dispose of them immediately. Avoid touching

the leaked material or letting it come in contact with clothing,

etc. Clean the battery compartment thoroughly before

installing new batteries.

Remote control operation range

Notes

• There should be no large obstacles between the remote control

and the main unit.

• If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp, etc.),

it might cause the remote control not to work correctly. In this

case, reposition the main unit to avoid direct lighting.

Removing the protection sheet

The remote control is shipped with a protection sheet to

prevent the surface from being scratched during

transportation.

When removing the sheet, first put adhesive tape on an

edge of the remote control so that the tape sticks to the

sheet. Then peel the sheet off with the tape.

Note

• Do not scratch the remote control surface when peeling the

sheet off.

GETTING STARTED

STANDBY/ON

NATURAL SOUND MINIDISC RECORDER MDX-E300

+–

INPUT

ANALOG

REC LEVEL

DIGITAL

MIN MAX

REC/PAUSE

30°

Remote control

sensor

Within approximately

6 m (20 feet)

2

1

3

TITL

E

D

E

L

E

T

E

S

ET

C

H

A

R

N

U

M

B

E

R

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R S

T

U

V

W

X

Y

Z/

S

P

A

C

E

C

A

N

C

E

L

E

N

T

E

R

E

D

IT

1

2

3

4

5

6

7

8

9

0

+10

+100

T

I

T

L

E

D

E

L

E

T

E

S

E

T

C

H

A

R

N

U

M

B

E

R

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

/

S

P

A

C

E

CANCEL ENTER

E

D

I

T

1

2

3

4

5

6

7

8

9

0

+

1

0

+

1

0

0103MDXE300(M).1-8.E 02.5.17, 10:53 AM5

6

System connections

Never plug the AC power cord to the wall outlet until all connections are

completed.

• Connections should be made to the correct input/output jacks on the other component.

• Also refer to the owner’s manual supplied with the components you are connecting.

• If the placement of this unit causes noise in other equipment, such as a tuner, move them farther apart.

• The connection using the SYSTEM CONNECTOR jack allows you to control this unit as well as the connected

components of YAMAHA Piano Craft series. Make system control connections between the Piano Craft series

components using the system control cable.

To reduce the standby power consumption, connect the AC power cord of this unit to a switched AC outlet of your

receiver (Except for U.K. model).

Notes

• Before making OPTICAL connections, remove the jack cover(s).

• In order to protect the jacks from dust, be sure to attach the jack covers when the optical jacks are not being used.

Connecting CRX-E300

GETTING STARTED

ANALOG DIGITAL

OPTICAL

SYSTEM

CONNECTOR

IN

L

D

OUT

1

IN

2 OUT

R

C

MD

TAPE

IN

OUT

IN

OUT

AUX

D

A

B

LR

C

OUT

6

Ω

MIN. /SPEAKER

OUT

DIGITAL

SUBWOOFER

OPTICAL

SPEAKERS

RL

FM ANT

GND – AM ANT

75Ω UNBAL.

SYSTEM CONNECTOR

This unit (MDX-E300)

CD receiver (CRX-E300)

Audio pin

cables

(included)

Optical cable

(included)

System control cable

(included)

To wall outlet

To CRX-E300

Notes

• The ANALOG OUT jacks on this unit are marked Ç and the ANALOG IN jacks are marked Î. When connecting this unit to

CRX-E300 whose jacks are marked Å, ı, Ç and Î, connect this unit’s ANALOG OUT jacks to the input jacks marked Ç and connect

this unit’s ANALOG IN jacks to the output jacks marked Î on the rear panel of CRX-E300.

• The SYSTEM CONNECTOR jack should be connected to the SYSTEM CONNECTOR jack on CRX-E300.

• For digital recording, the DIGITAL OPTICAL 1 IN jack should be connected to the DIGITAL OPTICAL OUT jack on CRX-E300.

0103MDXE300(M).1-8.E 02.5.17, 10:53 AM6

7

English

ANALOG DIGITAL

OPTICAL

SYSTEM

CONNECTOR

IN

L

D

OUT

1

IN

2 OUT

R

C

FM ANT

75Ω UNBAL.

IN

OUT

6Ω MIN./SPEAKER

SPEAKERS

SUBWOOFER

OUT

SYSTEM

CONNECTOR

GND

AM

ANT

TAPE

CD

AUX

MD

R

L

R L

+

–

A

B

E

C

D

ANALOG DIGITAL

OPTICAL

SYSTEM

CONNECTOR

L

OUT

R

E

GETTING STARTED

To wall outlet

Notes

• The ANALOG OUT jacks on this unit are marked Ç and the ANALOG IN jacks are marked Î. When connecting this unit to RX-E400

whose jacks are marked Å, ı, Ç, Î and ‰, connect this unit’s ANALOG OUT jacks to the input jacks marked Ç and connect this

unit’s ANALOG IN jacks to the output jacks marked Î on the rear panel of RX-E400.

• The SYSTEM CONNECTOR jack should be connected to the SYSTEM CONNECTOR jack on CDX-E400.

• For digital recording, the DIGITAL OPTICAL 1 IN jack should be connected to the DIGITAL OPTICAL OUT jack on CDX-E400.

Connecting RX-E400 and CDX-E400

CD player (CDX-E400)

This unit (MDX-E300)

Receiver (RX-E400)

To RX-E400

Optical cable

(included)

System control cable

(included)

Audio pin cables

(included)

System control cable

To RX-E400

0103MDXE300(M).1-8.E 02.5.17, 10:53 AM7

8

DIGITAL OUT

OPTICAL

DIGITAL IN DIGITAL OUT

OPTICAL OPTICAL

ANALOG DIGITAL

OPTICAL

SYSTEM

CONNECTOR

IN

L

D

OUT

1

IN

2 OUT

R

C

Connecting your audio system

Digital connections

GETTING STARTED

Notes for digital connections

• The DIGITAL OPTICAL IN jacks can be connected to any component with an optical output so you can make direct digital recordings.

• The DIGITAL OPTICAL OUT jacks can be connected to any component with an optical input so you can output digital audio from an

MD.

• Before making OPTICAL connections, remove the jack cover(s).

• In order to protect the jacks from dust, be sure to attach the jack covers when the optical jacks are not being used.

Analog connections

Notes for analog connections

• The white plug on the audio pin cables corresponds to the L (left) channel and the red plug corresponds to the R (right) channel. Be sure

to connect L (left) to L and R (right) to R. Also make sure that the plugs are fully inserted and that the connection is firm.

• The ANALOG OUT jacks on this unit should be connected to the MD PLAY jacks on your amplifier.

The ANALOG IN jacks on this unit should be connected to the MD REC jacks on your amplifier.

MD/TAPE

ANALOG DIGITAL

OPTICAL

SYSTEM

CONNECTOR

IN

L

D

OUT

1

IN

2 OUT

R

C

This unit (MDX-E300)

Optical cable

Audio pin cables

CD player (etc.) with

optical OUT

Amplifier/Receiver

with optical IN/OUT

Optical cable

This unit (MDX-E300)

Amplifier/Receiver

To AC outlet

0103MDXE300(M).1-8.E 02.5.17, 10:53 AM8

9

English

STANDBY/ON

NATURAL SOUND MINIDISC RECORDER MDX-E300

+–

INPUT

ANALOG

REC LEVEL

DIGITAL

MIN MAX

REC/PAUSE

1 Insert an MD.

2 Press #/* (# on the remote control) to start

playback.

3 Adjust the volume using the volume control on the

amplifier (or receiver).

STANDBY/ON

Jog dial

&

1

2

TITLE

DELETE

SET

CANCEL ENTER

EDIT

CHAR

NUMBER

A B C D E F G H I J K L

1234

5678

90

+10 +100

A-B S/F

DISPLAY

POWER

SCROLL

M N O P Q R S T U V W X

Y Z

REC/

PAUSE

SYNC

/

SPACE

M-MARK REC MODE

INPUT

RANDOM PROGRAM

REPEAT

!

2

*

Numbers

&

⁄

$›

POWER

To pause

Press #/* (* on the remote control).

Press again to resume playback (or press # on the remote

control).

To stop

Press &.

To eject the MD

Press .

Skipping tracks

To skip to the next track

Turn the jog dial to the right (or press › on the remote

control).

To skip to a previous track

Turn the jog dial to the left (or press $ on the remote

control).

To skip to a specific track number

Press the number buttons on the remote control

corresponding to the track you desire.

Example:

To select track 3, press 3.

To select track 13, press +10, then press 3.

To select track 23, press +10 twice, then press 3.

To select track 123, press +100 once, and +10 twice, then

press 3.

Searching

To search forward during play or

pause

Press and hold ⁄ on the remote control.

To search in reverse during play or

pause

Press and hold ! on the remote control.

Notes

• Sound can be heard when searching in play mode to help you

locate the desired position within the track. No sound is heard

when searching in pause mode, but the search is conducted at a

higher speed.

• Search may not function correctly when there are several

consecutive tracks consisting of only a few seconds each.

Arrow pointed toward

disc insertion slot

Label facing up

Preparation

• Press STANDBY/ON (POWER on the remote control)

to turn this unit on.

• Select “MD” as the input source of the connected

receiver.

PLAYBACK

0104MDXE300(M).9-12.E 02.5.17, 10:54 AM9

10

Switching the display

Press DISPLAY during stop or playback to display other

information, such as the remaining time and track titles.

During stop

Press DISPLAY repeatedly to display the following

information.

1 Number of tracks and total playing time

2 Time remaining on the MD (only for recordable

MDs)

3 Disc title

During playback

Press DISPLAY repeatedly to display the following

information.

1 Current track number and elapsed time

2 Time remaining on the current track

3 Track title

• If the track has not been given a name, “No Title”

is displayed.

To view the entire disc (track) title

If the disc (track) title is too long to fit in the display,

press SCROLL to move the title sequentially across the

display. While the title is being displayed, press

SCROLL to pause the display, and again to continue

presentation of the title. Press and hold SCROLL for

rapid presentation of the title.

A-B S/F

DISPLAY

POWER

SCROLL

REC/

PAUSE

SYNC

M-MARK REC MODE

INPUT

RANDOM PROGRAM

REPEAT

SCROLL

DISPLAY

ANALOG

DIGITAL

OPT.123

COAX.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

DISC TRACK

TOTAL

REMAIN

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

ANALOG

DIGITAL

OPT.123

COAX.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

DISC TRACK

TOTAL

REMAIN

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

ANALOG

DIGITAL

OPT.123

COAX.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

DISC TRACK

TOTAL

REMAIN

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

ANALOG

DIGITAL

OPT.123

COAX.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

DISC TRACK

TOTAL

REMAIN

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

ANALOG

DIGITAL

OPT.123

COAX.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

DISC TRACK

TOTAL

REMAIN

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

ANALOG

DIGITAL

OPT.123

COAX.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

DISC TRACK

TOTAL

REMAIN

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

Total tracks

Total playing time

REMAIN indicator Time remaining on the MD

Total tracks

REMAIN indicator

Track number

Elapsed time

PLAYBACK

0104MDXE300(M).9-12.E 02.5.17, 10:54 AM10

11

English

Random play

You can have the unit play all the tracks on a disc in

random order.

To start random playback

Press RANDOM.

The RANDOM indicator lights up and “_ _ _ - - : - -”

appears in the display while the unit selects a track.

Playback starts automatically.

To cancel

Press RANDOM again to turn off the RANDOM

indicator or press &.

Note

• Pressing › during random play skips to another track at

random. Pressing $ returns to the beginning of the current

track (you cannot return to previously played tracks).

Repeat play

You can have the unit repeat a single track, a full disc, or

just part of a track.

Press REPEAT S/F repeatedly to light the REPEAT S or

REPEAT F indicators.

To repeat the single track, light the REPEAT S indicators.

To repeat the full disc, light the REPEAT F indicators.

To cancel

Press REPEAT S/F repeatedly to turn off the REPEAT S

or REPEAT F indicators.

Notes on full disc repeat

• In program play mode, the entire program is played repeatedly.

• In random play mode, the unit reshuffles the tracks and plays

them again after each track plays once.

A-B repeat

This function lets you repeat a specific part of a track.

It’s a convenient way to study a language, or to learn the

lyrics to your favorite song (etc.).

1 Press REPEAT A-B during playback to specify the

beginning (A point) of the part you want to repeat.

• The REPEAT A indicators light up.

2 Press REPEAT A-B again to specify the end (B

point) of the part you want to repeat.

• The REPEAT A-B indicators light up and the part

you specified starts to repeat.

To cancel

Press & or REPEAT A-B.

A-B S/F

DISPLAY

POWER

SCROLL

REC/

PAUSE

SYNC

M-MARK REC MODE

INPUT

RANDOM PROGRAM

REPEAT

REPEAT S/F

REPEAT A-B

RANDOM

A-B S/F

DISPLAY

POWER

SCROLL

REC/

PAUSE

SYNC

M-MARK REC MODE

INPUT

RANDOM PROGRAM

REPEAT

COAX

.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

COAX

.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

COAX.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

COAX

.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

PLAYBACK

0104MDXE300(M).9-12.E 02.5.17, 10:54 AM11

12

Program play

This function lets you enjoy listening to your favorite

tracks in any order you desire.

1 Press & to stop playback.

2 Press PROGRAM to light up the PROGRAM

indicator.

3 Program the desired track by pressing the

corresponding number buttons.

Example:

To select track 3, press 3.

To select track 13, press +10, then press 3.

To select track 23, press +10 twice, then press 3.

To select track 123, press +100 once, and +10 twice,

then press 3.

Repeat this operation to program up to 30 steps.

4 Press PROGRAM to confirm the program.

5 Press # to start program playback.

To check the programmed data

1 Stop or pause program playback.

2 Press $ or › to skip through the step

information (or use the jog dial on the front panel).

To change a step

1 Stop program playback.

2 Press PROGRAM.

3 Press $ or › to skip through the step

information (or use the jog dial on the front panel).

4 Use the number buttons to program a new track

number for that step. The original track is cleared

from memory and the new track is programmed.

To delete a specific step

1 Stop program playback.

2 Press PROGRAM.

3 Press $ or › to skip through the step

information (or use the jog dial on the front panel).

4 Press DELETE to delete the step. The higher steps

are renumbered automatically.

To cancel

During the stop mode, press & to turn off the PROGRAM

indicator.

Notes

• If the total time exceeds 100 minutes, “Over” is displayed

instead of the total time.

• $ or › can be used during playback to skip between

programmed tracks.

5

Current programmed

track number

Total playing time

2,4

3

DELETE/

CANCEL

!

⁄

$

›

1

TITLE

DELETE

SET

CANCEL ENTER

EDIT

CHAR

NUMBER

A B C D E F G H I J K L

1234

5678

90

+10 +100

A-B S/F

DISPLAY

POWER

SCROLL

M N O P Q R S T U V W X

Y Z

REC/

PAUSE

SYNC

/

SPACE

M-MARK REC MODE

INPUT

RANDOM PROGRAM

REPEAT

ANALOG

DIGITAL

OPT.123

COAX.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

DISC TRACK

TOTAL

REMAIN

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

PLAYBACK

0104MDXE300(M).9-12.E 02.5.17, 10:54 AM12

13

English

TITLE

DELETE

SET

CANCEL ENTER

EDIT

CHAR

NUMBER

A B C D E F G H I J K L

1234

5678

90

+10 +100

A-B S/F

DISPLAY

POWER

SCROLL

M N O P Q R S T U V W X

Y Z

REC/

PAUSE

SYNC

/

SPACE

M-MARK REC MODE

INPUT

RANDOM PROGRAM

REPEAT

STANDBY/ON

NATURAL SOUND MINIDISC RECORDER MDX-E300

+–

INPUT

ANALOG

REC LEVEL

DIGITAL

MIN MAX

REC/PAUSE

STANDBY/ON

&

1

8

*

DELETE/

CANCEL

&

POWER

Note

Please check the copyright laws in your country to

record from records, compact discs, radio, etc.

Recording of copyright material may infringe

copyright laws.

This unit allows you to make recordings from a wide

variety of program sources (both analog and digital).

When recording an analog source (such as an FM

broadcast or cassette) this unit converts the analog signals

to a 44.1 kHz digital signal before recording them onto

the MD.

When recording a digital source, this unit converts the

digital signals to 44.1 kHz for recording onto the MD.

However, if you are recording a 44.1 kHz source signal

(such as a CD) there is no conversion. This unit can

record 32, 44.1 and 48 kHz digital signals.

Preparation

• Press STANDBY/ON (POWER on the remote control)

to turn this unit on.

6

277

6

M-MARK

SET/ENTER

2

1 Insert an MD.

2 Press INPUT repeatedly to select the input you want

to record.

For Select

ANALOG IN Î ANALOG

DIGITAL OPTICAL 1 IN DIGITAL OPT. 1

DIGITAL OPTICAL 2 IN DIGITAL OPT. 2

* Appears when digital signal is input.

3 If desired, press REC MODE to select the recording

mode (see “Setting the recording mode” on page 15).

4 Locate the point where you want to start recording.

When recording on a blank MD

• Skip this step.

To start recording from the end of a previous

recording

• Press & to set this unit to stop mode.

To record over a previous recording

• Turn the jog dial (or press $ or › on the remote

control) to select a track (recording starts from the

beginning of the deleted track).

5 Start playing the source to be recorded.

• If you do not need to adjust the recording level,

this step is not necessary.

6 Press REC/PAUSE to set this unit to record pause

mode.

• The REC * indicators light up.

“REC Standby” and the amount of time available

for recording flash alternately in the display.

If you selected a track number (in step 4) to

record over a previous recording

•“OverWrite OK?” appears in the display.

To confirm, press SET/ENTER. This operation will

erase the selected track number (or point) and all

subsequent material.

To cancel, press DELETE/CANCEL (or &).

Arrow pointed toward

disc insertion slot

Label facing up

ANALOG

DIGITAL

OPT.123

COAX.

32 44.1 48

kHz

REPEAT

MONO

REC

MANUAL

TOC

DISC TRACK

TOTAL

REMAIN

RANDOM

PROGRAM

A-B S F

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – – ––

Input indicator

(Source) sampling frequency indicators*

RECORDING

3

0105MDXE300(M).13-16.E 02.5.17, 10:54 AM13

14

7 Adjust the recording levels. (See “Adjusting

recording levels” on this page.)

• Before proceeding to the next step, be sure to reset

the source to be recorded to the beginning.

8 Press #/* (# on the remote control) to start

recording.

• The TOC indicator lights up.

When the TOC indicator is lit, this means that the

TOC information has not yet been written to the

disc. After recording is complete, the TOC data is

automatically written to the disc.

9 Start playing the source to be recorded.

• Synchronized start is possible if you make system

control connections to CRX-E300, CDX-E400 or

KX-E300. Press ^ on CRX-E300, CDX-E400

or # on KX-E300 to start playing the source after

step 7. The recording begins automatically. To use

timer recording, please refer to the instructions

supplied with CRX-E300 or CRX-E400.

To pause

Press REC/PAUSE.

Press #/* (# on the remote) to resume recording.

To stop

Press &.

To eject the MD

Press .

If the power cord is disconnected while making a

recording, the TOC data cannot be correctly written to

the disc and the recorded data will be erased.

TOC writing may be impossible (or track number

marking may not perform as expected) when recording

a damaged CD or a broadcast source with interference.

Adjusting recording levels

Setting the digital recording level

The digital recording level is set by default to 0 dB, the

level of the input source. Normally, it is not necessary to

adjust this level. However, because of the variance in

levels between different digital formats and sources, it is

possible to adjust the recording level of the digital signal.

The digital level can be adjusted up to +12 dB and down

to a minimum (MIN) level. Adjust DIGITAL REC

LEVEL so that the highest peak causes the 0 dB level

indicators to flicker. Do not cause the OVER indicator to

light. Once recording is stopped, the digital recording

level returns to the default level of 0 dB.

Setting the analog recording level

For best results, play the loudest passage of the source to

be recorded and watch the recording level meter in the

display.

Adjust ANALOG REC LEVEL so that the highest peak

causes the 0 dB level indicators to flicker. Do not cause

the OVER indicator to light as it may produce distortion

in the audio signal.

Note

• To adjust the recording level of a source connected with the

system control cable, remove the MD before pressing ^ (or

#) on the source component. If you press the button with an

MD in this unit, the recording begins automatically.

Track marking

When making a recording, you can choose either

automatic or manual marking. This feature operates

somewhat differently for analog and digital signals. See

below for details.

Press M-MARK repeatedly to select automatic

(MANUAL indicator is not lit) or manual (MANUAL

indicator lit) marking.

When recording analog signals

Auto : Track numbers are written in synchronization with

the input level of the signal being recorded. During

recording, if no sound is detected for more than 1.5

seconds, the recorder interprets this to be a gap between

two tracks. When the source signal is detected again, a

track number is automatically written.

Manual : One track number is written automatically

when you start recording, but none are written during

recording. To mark a track number, press M-MARK at the

desired position while recording.

Note

• When using manual marking, the marks must be set at least 4

seconds apart.

When recording digital signals

Track numbers are written in the same positions as the

original source (CD, etc.) with either automatic or manual

marking.

To add additional track numbers, set M-MARK to

MANUAL and press M-MARK at the desired position

while recording.

Notes

• When recording is paused, the portion recorded up to the pause

is counted as an individual track. When recording is resumed,

a new track number is created.

• During synchronized recording, manual track marking is not

possible.

L

R

dB

–

60 30 10 6 4 2 1 0 OVER00

–– – ––––

Should not light

RECORDING

0105MDXE300(M).13-16.E 02.5.17, 10:54 AM14

15

English

Music synchro recording

The synchronized recording function lets you set this unit

to start recording automatically when a sound signal is

input.

1 Load the sound source into the source component.

• If necessary, program, or select the track you want

to start recording from before proceeding to the

next step. (Refer to the operation manual supplied

with the source component for instructions

regarding its use.)

2 Press INPUT repeatedly to select the input connected

to the sound source you want to record.

3 Press SYNC to set this unit to record pause mode.

• The REC * indicators light up.

“Synchro REC” and the amount of time available

for recording flash alternately in the display.

During synchronized recording, analog input

sources are recorded at the current ANALOG

REC LEVEL setting, digital sources are recorded

at the 0 dB level.

The MD starts recording automatically when a

sound signal is input. When the sound signal

stops, the unit switches back to record pause mode

and “Synchro REC” blinks in the display. The

next time a sound signal is detected, recording

starts again. In this manner, the presence of a

sound signal automatically switches the unit

between record and record pause modes.

4 Start playing the sound source.

To cancel the synchronized recording

mode

Press &.

Note

• When the signals at the beginning of a track are lower than the

level required to start synchronized recording, they are not

recorded. Should this occur, perform manual recording.

SYNC

INPUT

REC MODE

&

Setting the recording

mode

This unit incorporates various recording modes. Choose

the one that suits your needs.

Press REC MODE repeatedly until the indicator for the

desired recording mode lights up.

Example: When using an 80 minute MD

MONO (monaural)

This mode provides 160 minutes monaural recording.

LP2

This mode provides 160 minutes stereo recording.

LP4

This mode provides 320 minutes stereo recording.

When all of the above indicators are turned off, this unit

enters normal stereo recording mode.

Notes

• MDLPs (= discs recorded in LP mode) cannot be played back

nor edited on non MDLP players. If you play MDLPs (=discs

recorded in LP mode) on a non-MDLP player, “LP:” will

appear at the top of the title and no sound will be reproduced.

• Normal stereo recording provides the best sound quality.

• The recording mode cannot be changed during recording.

A-B S/F

DISPLAY

POWER

SCROLL

REC/

PAUSE

SYNC

M-MARK REC MODE

INPUT

RANDOM PROGRAM

REPEAT

A-B S/F

DISPLAY

POWER

SCROLL

REC/

PAUSE

SYNC

M-MARK REC MODE

INPUT

RANDOM PROGRAM

REPEAT

RECORDING

0105MDXE300(M).13-16.E 02.5.17, 10:54 AM15

16

Monitor out

When a disc is not loaded, you can use the monitor out

function to monitor the sound of the input source. The

monitor out function can also be used to set recording

levels without loading a disc.

1 Press to remove the disc.

2 Press INPUT repeatedly to select the input connected

to the sound source you want to monitor.

3 Press REC/PAUSE.

•“Monitor Out” appears in the display.

Sound from the selected input will be output from

this unit’s analog and digital output terminals.

4 Start playing the sound source.

• The sound is output from the MD recorder’s

analog and digital output terminals.

To cancel

Press &.

Notes

• This function is useful to monitor the sound of an external

digital component connected to the DIGITAL OPTICAL 2 IN

jack.

• The digital volume can be adjusted when using the monitor out

function. However, please note that the digital volume setting

is restored to the default (0 dB) the next time a recording is

made.

STANDBY/ON

NATURAL SOUND MINIDISC RECORDER MDX-E300

+–

INPUT

ANALOG

REC LEVEL

DIGITAL

MIN MAX

REC/PAUSE

23

&

1

Protecting a recorded MD

• To protect a recorded MD, slide the tab on the side of

the MD to open the slot.

In this position, the MD cannot be used for recording,

editing, or titling. To record, edit, or title the MD, slide

the tab to close the slot.

• If the MD is protected against erasure, “Protected”

appears in the display.

Tab

Slide the tab to

open the slot.

RECORDING

0105MDXE300(M).13-16.E 02.5.17, 10:54 AM16

17

English

TITLE

DELETE

SET

CANCEL ENTER

EDIT

CHAR

NUMBER

A B C D E F G H I J K L

1234

5678

90

+10 +100

A-B S/F

DISPLAY

POWER

SCROLL

M N O P Q R S T U V W X

Y Z

REC/

PAUSE

SYNC

/

SPACE

M-MARK REC MODE

INPUT

RANDOM PROGRAM

REPEAT

›

&

SET/ENTER

EDITING

One of the main advantages of MD is its editing

capabilities. You can remove the commercials from a

radio broadcast, reorder songs into the order you want,

remove songs, combine songs, and even remove part of a

song.

This unit offers the following editing operations.

Erase

Lets you erase a track, the entire disc, or part of a track.

You can also erase the title of a disc, or the titles of tracks

on a disc.

Move

Lets you move a track to a different track number.

Combine

Lets you combine two adjacent tracks.

Divide

Lets you split a single track into two different tracks.

FRA check

Lets you recover disc space that may have been lost after

multiple edit operations.

TOC write

Lets you write TOC information to the disc so that

changes are saved.

Undo

Lets you undo the previous edit operation if you make a

mistake.

Notes on editing

To cancel an edit

Press &.

Before editing

Make sure that the MD is not protected against erasure. If

the MD is protected, you cannot edit the MD. Slide the

tab to close the slot on the side of the MD.

After editing

• Press in order to update the TOC information and

pull the MD out.

• The TOC indicator lights to show that the TOC

information has not yet been written to the disc. Undo is

possible only when the TOC indicator is lit.

EDIT

⁄

$

!

0106MDXE300(M).17-20.E 02.5.17, 10:54 AM17

18

Erase

EDITING

Erase

The ability to erase sound without having to re-record is a

convenient function of MD. You can erase the entire disc,

a single track, or just part of a track.

Disc erase

This operation lets you erase all audio and title (character)

data to create a blank MD. Please note that once erased,

this data can be recovered using the UNDO function.

1 Press & to set this unit to stop mode.

2 Press EDIT repeatedly to display “Disc Erase?”, then

press SET/ENTER.

•“DiscEraseOK?” appears in the display.

3 Press SET/ENTER again.

• When all audio, name and title data has been

erased “Complete” appears momentarily.

Track erase

This operation lets you erase a single track as well as

corresponding title data. After you erase the track, the

total number of tracks decreases by one and all tracks

following that track are renumbered.

Example: Erasing track 3

1 Use $ or › to select the track you want to erase.

2 Press EDIT repeatedly to display “Erase ?”, then

press SET/ENTER.

•“(track number) Erase OK?” appears in the

display.

3 Press SET/ENTER again.

• The track is erased and “Complete” appears

momentarily.

If you plan to erase two or more tracks

To avoid confusion you should always erase from higher

track numbers to lower track numbers. This prevents

accidental renumbering of tracks you plan to erase.

Before

erasing

After

erasing

Part erase

This operation lets you erase part of a track.

1 Play the track containing the part you want to erase.

2 Use ! or ⁄ to locate the beginning of the part

you want to erase (point A), then press * to pause at

that point.

3 Press EDIT repeatedly to display “A–B Erase?”, then

press SET/ENTER.

• Point A (from step 2) is registered and “Erase

A–_” appears in the display.

4 Use # and ⁄ to locate the end of the part you want

to erase (point B).

5 Press SET/ENTER to register point B.

•“Check” appears, then the part you specified plays

repeatedly and “Erase A–B?” appears in the

display.

To adjust points A and B

• Press EDIT repeatedly to display “A point” and “B point”

alternately. Adjust the selected point by using $ or

› in the direction you want to move the point.

Each point can be adjusted up to 2 seconds in either

direction.

6 Press SET/ENTER again.

• The part is erased and “Complete” appears

momentarily.

Notes

• After part erase, a new track number is automatically assigned

to the section starting after point B.

• Point B cannot be positioned before point A.

Before

erasing

After

erasing

12

AB DEC

3456

12

AB EFD

3456

1

ACB

23

12

A1 A2 CB

34

0106MDXE300(M).17-20.E 02.5.17, 10:54 AM18

Sayfa yükleniyor ...

Yamaha MDX-E300 El kitabı

Yamaha MDX-E300 El kitabı

Diğer dillerde

İlgili Makaleler