Yamaha RX-V340RDS El kitabı

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in China

WB14590

RX-V340RDS

GB

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

RX-V340RDS

AV Receiver

Ampli-tuner audio-vidéo

TECHNISCHE GEGEVENS

AUDIO GEDEELTE

• Minimum RMS uitgangsvermogen voor hoofd, midden, achter

1 kHz, 0,1% THV, 6 Ω

[Modellen voor de VS en Canada] ........................................ 70 W

[Overige modellen] ................................................................ 60 W

1 kHz, 0,7% THV, 6 Ω

[Modellen voor de VS en Canada] ........................................ 75 W

[Modellen voor het V.K., Europa, Australië en Korea] ......... 65 W

• DIN Standaard uitgangsvermogen

[Modellen voor Europa]

1 kHz, 0,7% THV, 4 Ω .......................................................... 75 W

• Maximum uitgangsvermogen (EIAJ)

[Modellen voor China, Korea en algemene modellen]

1 kHz, 10% THV, 6 Ω ........................................................... 80 W

• Dynamisch uitgangsvermogen (IHF) 6/4/2 Ω

[Modellen voor de VS en Canada] .......................... 85/100/115 W

[Overige modellen] .................................................... 75/95/105 W

• Frequentierespons

CD, etc naar Hoofd L/R ....................... 10 Hz t/m 100 kHz, –3 dB

• Totale Harmonische Vervorming

1 kHz, 30 W, 6 Ω, Hoofd L/R ...............................................0,06%

• Signaal-ruis verhouding (IHF-A Netwerk)

CD (kortgesloten 250 mV) naar Hoofd L/R, Effect uit

..................................................................................... h100 dB

• Residuele ruis (IHF-A Netwerk)

Hoofd L/R ......................................................... 150 µV of minder

• Kanaalscheiding (1 kHz/10 kHz)

CD, etc (5,1 kΩ getermineerd) naar Hoofd L/R

........................................................................ h60 dB/h45 dB

• Toonregeling (Hoofd L/R)

BASS versterking/verzwakking ............................ ±10 dB/100 Hz

TREBLE versterking/verzwakking ....................... ±10 dB/20 kHz

• Uitgangsvermogen hoofdtelefoon ............................. 300 mV/470 Ω

• Ingangsgevoeligheid

CD, etc .................................................................... 150 mV/47 kΩ

6CH INPUT ............................................................ 150 mV/47 kΩ

• Uitgangsniveau

OUT (REC) ........................................................... 150 mV/1,2 kΩ

OUTPUT SUBWOOFER ............................................. 4 V/1,2 kΩ

VIDEO GEDEELTE

• Videosignaal-type ....................................................... NTSC of PAL

• Composiet videosignaal-niveau ..................................... 1 Vp-p/75 Ω

• Signaal-ruis verhouding ...................................................... h50 dB

• Frequentierespons (MONITOR OUT) ...... 5 Hz t/m 10 MHz, –3 dB

FM GEDEELTE

• Afstembereik

[Modellen voor de VS en Canada] ................ 87,5 t/m 107,9 MHz

[Overige modellen] .................................... 87,50 t/m 108,00 MHz

• 50 dB Rustgevoeligheid (IHF, 100% mod.)

Mono/Stereo ........................ 2,0 µV (17,3 dBf) /25 µV (39,2 dBf)

• Selectiviteit (400 kHz) ............................................................. 70 dB

• Signaal-ruis verhouding (IHF)

Mono/Stereo .............................................................. 76 dB/70 dB

• Harmonische vervorming (1 kHz)

Mono/Stereo ................................................................. 0,2%/0,3%

• Stereoscheiding (1 kHz) .......................................................... 42 dB

• Frequentierespons ............................. 20 Hz t/m 15 kHz +0,5, –2 dB

AM GEDEELTE

• Afstembereik ........................................ 530/531 t/m 1710/1611 kHz

• Bruikbare gevoeligheid .................................................... 300 µV/m

ALGEMEEN

• Stroomvoorziening

[Modellen voor de VS en Canada] ...... 120 V wisselstroom/60 Hz

[Modellen voor Australië] ................... 240 V wisselstroom/50 Hz

[Modellen voor het V.K., Europa en Singapore]

.......................................................... 230 V wisselstroom/50 Hz

[Modellen voor Korea] ........................ 220 V wisselstroom/60 Hz

[Modellen voor China] ........................ 220 V wisselstroom/50 Hz

[Algemene modellen]

............................ 110-120V/220-240 V wisselstroom, 50/60 Hz

• Stroomverbruik

[Modellen voor de VS en Canada] ......................... 210 W/280 VA

[Overige modellen] .............................................................. 210 W

Standby-stand ....................................................... 0,8 W of minder

• Afmetingen (b x h x d) ..................................... 435 x 151 x 322 mm

• Gewicht .................................................................................... 8,0 kg

*Technische gegevens kunnen zonder voorafgaande kennisgeving

gewijzigd worden.

01RX-V340RDS_cv_GB.p65 03.4.1, 7:03 PM1

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool,

dry, clean place — away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 30 cm on the top,

20 cm on the left and right, and 20 cm on the back

of this unit.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4

Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in a environment with high humidity (i.e. a room with

a humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage to

this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed

to liquid dripping or splashing. On the top of this

unit, do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

–

Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the

user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation.

If the temperature inside this unit rises, it may

cause fire, damage to this unit, and/or personal

injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

13

To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set

this unit in standby mode, and disconnect the AC

power plug from the wall outlet.

18

VOLTAGE SELECTOR (General model only)

The VOLTAGE SELECTOR on the rear panel of this

unit must be set for your local main voltage

BEFORE plugging into the AC main supply.

Voltages are 110V-120V, 220V-240V AC, 50/60 Hz.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet,

even if this unit itself is turned off. This state is called

standby mode. In this state, this unit is designed to

consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

■ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

Note

• The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED

IN ACCORDANCE WITH THE FOLLOWING

CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

CAUTION

53

Nederlands

AANVULLENDE

INFORMATIE

■ PCM (Lineair PCM)

Lineair PCM is een signaalformaat voor

ongecomprimeerde gedigitaliseerde analoge

geluidssignalen, geschikt voor opname, transmissie en

weergave. Dit is de methode waarmee CD’s en DVD

audio discs zijn opgenomen. Het PCM systeem maakt

gebruik van een systeem waarbij het analoge signaal in

zeer kleine stukjes wordt gehakt en per stukje gemeten

wordt (‘bemonsterd’). PCM staat voor “Puls Code

Modulatie” en betekent dat het analoge signaal gecodeerd

wordt als pulsjes en vervolgens o gemoduleerd voor

opname.

■ Bemonsteringsfrequentie en aantal

kwantificeringsbits

Bij het digitaliseren van een analoog audiosignaal wordt

het aantal keren dat het signaal per seconde gemeten

wordt de bemonsteringsfrequentie genoemd, terwijl de

mate van detail waarin het geluid wordt omgezet in een

digitale waarde wordt aangegeven door het aantal

kwantificeringsbits.

De signalen die kunnen worden weergegeven hangen

mede af van de bemonsteringsfrequentie terwijl het

dynamisch bereik, het verschil tussen maximum en

minimum volume, afhangt van het aantal

kwantificeringsbits. Hoe hoger de

bemonsteringsfrequentie, hoe meer frequenties er kunnen

worden weergegeven en hoe hoger het aantal

kwantificeringsbits, hoe beter het volume kan worden

gereproduceerd.

WOORDENLIJST

01RX-V340RDS_cv2-3_GB.p65 03.4.1, 6:51 PM1

1

English

INTRODUCTION

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

CONTENTS

INTRODUCTION

CONTENTS ............................................................ 1

FEATURES ............................................................. 2

GETTING STARTED ............................................ 3

Supplied accessories .................................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel ................................................................. 4

Remote control .......................................................... 6

Front panel display .................................................... 8

PREPARATION

CONNECTIONS .................................................... 9

Before connecting components ................................. 9

Connecting video components ................................ 10

Connecting audio components ................................ 11

Connecting the antennas .......................................... 12

Connecting an external decoder .............................. 13

Connecting the speakers .......................................... 14

Connecting the power supply cords ........................ 17

Turning on the power .............................................. 17

BASIC SYSTEM SETTINGS ............................. 18

Using the basic menu .............................................. 18

Setting the unit to match your speaker system ........ 20

Setting speaker output levels (SP LEVEL) ............. 20

BASIC OPERATION

PLAYBACK .......................................................... 21

Input modes and indications .................................... 23

Selecting a sound field program .............................. 24

DIGITAL SOUND FIELD PROCESSING (DSP)

............................................................................ 27

Understanding sound fields ..................................... 27

Hi-Fi DSP programs ................................................ 27

CINEMA-DSP ...................................................... 28

Sound design of CINEMA-DSP ............................. 28

CINEMA-DSP Programs ........................................ 28

Sound field effects ................................................... 30

TUNING ................................................................ 31

Presetting stations .................................................... 32

Selecting a preset station ......................................... 34

RECEIVING RDS STATIONS ........................... 35

Description of RDS data ......................................... 35

Changing the RDS mode ......................................... 35

PTY SEEK function ................................................ 36

EON function .......................................................... 36

SLEEP TIMER ..................................................... 37

RECORDING ....................................................... 38

ADVANCED OPERATION

SET MENU ........................................................... 39

Set menu list ............................................................ 39

Adjusting the items on the set menu ....................... 39

SOUND 1 SPEAKER SET (speaker mode settings)

............................................................................. 40

SOUND 2 SP DISTANCE (speaker distance) ........ 42

SOUND 3 LFE LEVEL .......................................... 42

SOUND 4 D. RANGE (dynamic range) ................. 42

SOUND 5 CENTER GEQ

(center graphic equalizer) .................................... 43

SOUND 6 HP TONE CTRL

(headphone tone control) .................................... 43

INPUT 1 I/O ASSIGN (input/output assignment) .. 43

INPUT 2 INPUT MODE (initial input mode) ........ 43

OPTION 1 DISPLAY SET ...................................... 44

OPTION 2 MEM. GUARD (memory guard) ......... 44

OPTION 3 AUDIO MUTE ..................................... 44

SETTING THE SPEAKER LEVELS ................ 45

Adjusting the volume during playback ................... 45

Using the test tone ................................................... 45

ADDITIONAL INFORMATION

SOUND FIELD PROGRAM PARAMETER

EDITING .......................................................... 46

Changing parameter settings ................................... 46

Digital sound field parameter descriptions .............. 47

TROUBLESHOOTING ....................................... 48

GLOSSARY .......................................................... 52

SPECIFICATIONS .............................................. 54

03V340G_01-08_EN(03.4.14)a.p65 03.4.14, 11:48 AM1

2

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are

trademarks of Dolby Laboratories.

FEATURES

Multi-mode digital sound field processing

◆ Dolby Pro Logic/Dolby Pro Logic II decoder

◆ Dolby Digital/Dolby Digital + Matrix 6.1 Decoder

◆ DTS/DTS + Matrix 6.1 Decoder

◆ CINEMA DSP: Combination of YAMAHA DSP

technology and Dolby Pro Logic, Dolby Digital or

DTS

◆ Virtual CINEMA DSP

◆ SILENT CINEMA DSP

Sophisticated AM/FM Tuner

◆ 40-Station random access preset tuning

◆ Automatic preset tuning

◆ Preset station shifting capability (Preset editing)

Other features

◆ 96 kHz/24-bit D/A converter

◆ Set menu for optimizing this unit for your Audio/

Video system

◆ Test tone generator for easier speaker balance

adjustment

◆ 6-channel external decoder input

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

“DTS” and “DTS Digital Surround” are registered

trademarks of Digital Theater Systems, Inc.

Built-in 5-channel power amplifier

◆ Minimum RMS output power

(0.1% THD, 1 kHz, 6Ω)

[U.S.A. and Canada models]

Main: 70 W + 70 W

Center: 70 W

Rear: 70 W + 70 W

[Other models]

Main: 60 W + 60 W

Center: 60 W

Rear: 60 W + 60 W

■ About this manual

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases

when the button names differ between the main unit and the remote control, the button name on the remote control is

given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part for the reason of

the improvement in operativity ability, and others. In this case, the product has priority.

03V340G_01-08_EN(03.4.14)a.p65 03.4.14, 11:48 AM2

3

English

INTRODUCTION

Installing batteries in the remote

control

Insert the batteries in the correct direction by aligning the

+ and – marks on the batteries with the polarity markings

(+ and –) inside the battery compartment.

1 Press the tab of the battery compartment

cover and pull it in the direction of the arrow

to open the cover.

2 Remove the cover.

3 Insert the two batteries supplied (AA, R06,

UM-3) according to the polarity markings on

the inside of the battery compartment.

4 Put the cover back into place.

■ Notes on batteries

• Change all of the batteries if you notice a decrease in

the operating range of the remote control.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline

and manganese batteries) together. Read the packaging

carefully as these different types of batteries may have

the same shape and color.

• If the batteries have leaked, dispose of them

immediately. Avoid touching the leaked material or

letting it come into contact with clothing, etc. Clean the

battery compartment thoroughly before installing new

batteries.

AM loop antenna

(Europe, U.K., Australia and

Singapore models)

Indoor FM antenna

(U.S.A., Canada, China,

Korea and General models)

Batteries (2)

(AA, R06, UM-3)

Remote control

GETTING STARTED

Supplied accessories

After unpacking, check that the following parts are contained.

TEST

PROG PROG

STEREO

LEVEL

SET MENU

TUNER

CD MD/CD-R V-AUX 6CH IN

/DTS 6.1/5.1 NIGHT SLEEP

DVD D-TV/CBL VCR POWER

PRESET

A/B/C/D/E

MUTE

VOLUME

1

2

4

3

03V340G_01-08_EN(03.4.14)a.p65 03.4.14, 11:49 AM3

4

CONTROLS AND FUNCTIONS

Front panel

1 STANDBY/ON

Turns the unit on, or sets it in standby mode. When you

turn the unit on, you will hear a click and there will be a 4

to 5-second delay before it can reproduce sound.

Standby mode

In this mode, the unit uses a small amount of power in

order to receive infrared-signals from the remote

control.

2 Remote control sensor

Receives signals from the remote control.

3 Front panel display

Shows information about the operational status of the

unit.

4 TUNING MODE (AUTO/MAN’L MONO)

Switches the tuning mode between automatic and manual.

5 PRESET/TUNING (EDIT)

Switches the function of PRESET/TUNING l / h

between selecting a preset station number and tuning (the

colon (:) turns on or off).

This button is also used to exchange the assignment of

two preset stations with each other.

6 FM/AM

Switches the reception band between FM and AM.

7 MEMORY (MAN’L/AUTO FM)

Stores the current station in memory.

8 VOLUME

Controls the output level of all audio channels.

This does not affect the OUT (REC) level.

9

SILENT (PHONES jack)

Allows you to enjoy DSP effects when listening with

headphones.

Inserting the plug from your headphones into the

PHONES jack does not affect the sound output from the

speakers. If you wish to stop the signal output to the

speakers, press SPEAKERS ON/OFF so that it is in the

OFF position.

0 SPEAKERS ON/OFF

Turns on or off the speakers that you selected by

SPEAKERS A/B.

q SPEAKERS A/B

Selects the set of main speakers connected to the A or B

terminals.

(U.K. and Europe models only)

VOLUME

STANDBY

/ON

MODE START

PTY SEEK

RDS MODE/FREQ EON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

12 543 67 8

y

a s fd

MODE START

RDS MODE/FREQ

PTY SEEK

EON

9 0 q w r iute po

03V340G_01-08_EN(03.4.14)a.p65 03.4.14, 11:49 AM4

5

English

INTRODUCTION

w STEREO (EFFECT)

Switches between normal stereo and DSP effect

reproduction. When you select STEREO, the unit mixes

down all Dolby Digital and DTS signals (except the LFE

channel) as well as those 2-channel signals without

effects, to the main left and right speakers.

e PROGRAM l / h

Select the DSP program.

r A/B/C/D/E

Selects preset station groups A to E when the unit is in

tuner mode.

mode.

t PRESET/TUNING l / h

Select preset station numbers 1 to 8 when a colon (:) is

displayed in the front panel display.

Select the tuning frequency when a colon (:) is not

displayed when the unit is in tuner mode.

SET MENU –/+

Adjust settings on the set menu when the unit is not in

tuner mode.

y CONTROL

Switches between Bass (low-frequency response) control

mode and Treble (high-frequency response) control mode.

u BASS/TREBLE –/+

Increase or decrease low/high-frequency response when

the unit is in Bass/Treble control mode. The sound

changes 2dB each time you press one of these buttons.

Control range: –10 to +10dB.

i INPUT MODE

Sets the priority for the types of input signals (AUTO,

DTS, ANALOG) received when one component is

connected to two types of input jacks. You cannot set

priority for an audio sources if you have selected 6CH

INPUT as the input source.

o INPUT l / h

Selects the input source you want to listen to or watch.

p 6CH INPUT

Selects the audio source connected to the 6CH INPUT

jacks. This selection takes priority over sources selected

with INPUT (or the input selector buttons on the remote

control).

(U.K. and Europe models only)

a RDS MODE/FREQ

Press this button when the unit is receiving an RDS

station, to cycle the display mode among PS mode,

PTY mode, RT mode, CT mode (if the station offers

those RDS data service) and/or frequency display

mode in turn.

s PTY SEEK MODE

Press this button to set the unit in the PTY SEEK

mode.

d PTY SEEK START

Press this button to begin searching for a station after

the desired program type has been selected in the PTY

SEEK mode.

f EON

Press this button to select a radio program type

(NEWS, INFO, AFFAIRS, SPORT) to tune in

automatically.

CONTROLS AND FUNCTIONS

03V340G_01-08_EN(03.4.14)a.p65 03.4.14, 11:49 AM5

6

TEST

PROG PROG

STEREO

LEVEL

SET MENU

TUNER

CD MD/CD-R V-AUX 6CH IN

/DTS 6.1/5.1 NIGHT SLEEP

DVD D-TV/CBL VCR POWER

PRESET

A/B/C/D/E

MUTE

VOLUME

2

8

1

0

3

5

9

7

4

6

r

y

e

q

w

t

u

i

Remote control

1 Infrared emitter

Outputs infrared control signals. Aim this emitter at the

unit when using the remote control.

2 Input selector buttons

Select the input source.

3 A/B/C/D/E

Selects preset station groups A to E when the unit is in

tuner mode.

4 q/DTS

Selects the built-in Dolby Digital, DTS, Dolby Pro Logic

or Pro Logic II decoder.

5 6.1/5.1

Switches on or off the Dolby Digital + Matrix 6.1 or DTS

+ Matrix 6.1 decoder.

6 TEST

Outputs a test tone for use when adjusting the speaker

levels.

7 MUTE

Mutes the sound. Press again to restore the audio output

to the previous volume level.

8 LEVEL

Selects the effect speaker channel to adjust.

9 PROGRAM –/+

Select the DSP program.

0 Multi control section

Used to change and implement settings.

q POWER

Turns the unit on, or sets it in standby mode.

w 6CH IN

Selects the audio source connected to the 6CH INPUT

jacks.

e PRESET –/+

Select preset station numbers 1 to 8.

r SLEEP

Sets the sleep timer.

CONTROLS AND FUNCTIONS

This section describes the remote control controls and

their functions.

03V340G_01-08_EN(03.4.14)a.p65 03.4.14, 11:49 AM6

7

English

INTRODUCTION

Approximately 6 m (20 feet)

■ Using the remote control

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the main unit during operation.

■ Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– high humidity or temperature such as near a heater,

stove or bath;

– dusty places; or

– in places subject to extremely low temperatures.

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

30° 30°

CONTROLS AND FUNCTIONS

t NIGHT

Sets the unit in night listening mode.

y STEREO

Switches between normal stereo and DSP effect

reproduction. When you select STEREO the unit mixes

down all Dolby Digital and DTS signals (except the LFE

channel) as well as those 2-channel signals without effect

sounds, to the main left and right speakers.

u VOLUME +/–

Increases or decreases the volume level.

i SET MENU

Selects the set menu mode.

03V340G_01-08_EN(03.4.14)a.p65 03.4.14, 11:49 AM7

8

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

MATRIX

DIGITAL

PL

PCM

SILENT

DSP

HiFi

NIGHT

VIRTUAL

AUTO

STEREO

SLEEP

VOLUME

MUTE

MEMORYTUNED

L C R

RLLFE RC RR

~~~~~~~~~~~~~~

dB

ft

CTRTPTYPS

HOLDPTYEON

13

45

8

7

62

90qw yer uiop

a

t

1 Processor indicators

The indicators for the various decoders light up when the

decoders are in use.

2 VIRTUAL indicator

Lights up when using Virtual CINEMA DSP.

3 Headphones indicator

Lights up when headphones are connected to the

headphone jack.

4 Input source indicator

Highlights the current input source with a cursor.

5 Sound field indicator

Displays the sound field management the unit is using

when you listen to a DSP sound field program.

6 AUTO indicator

Shows that this unit is in the automatic tuning mode.

7 MUTE indicator

Flashes while the MUTE function is on.

8 VOLUME level indicator

Indicates the volume level.

9 PCM indicator

Lights up when this unit is reproducing PCM (pulse code

modulation) digital audio signals.

0 SILENT indicator

Lights up when headphones are connected and the digital

sound field processor is on.

q Multi-information display

Shows the current DSP program name and other

information when you are adjusting or changing settings.

w NIGHT indicator

Lights up when the unit is set to night listening mode.

e HiFi DSP indicator

Lights up when you select a Hi-Fi DSP sound field

program.

r CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound field

program.

t STEREO indicator

Lights up when the unit is receiving a strong signal from

a FM stereo broadcast while the “AUTO” indicator is lit.

y TUNED indicator

Lights up when this unit is tuned to a radio station.

u MEMORY indicator

Flashes to show a station can be stored in memory.

i SLEEP indicator

Lights up while the sleep timer is on.

o LFE indicator

Lights up when the input signal contains an LFE signal.

p Input channel indicator

The indicators for the appropriate sound channels light up

when a digital signal from a source is played back.

a RDS indicator (U.K. and Europe models only)

The name(s) of the RDS data offered by the currently

received RDS station light(s) up.

EON indicator lights up when an RDS station that offers

the EON data service is being received.

PTY HOLD indicator lights up while searching for

stations in the PTY SEEK mode.

Front panel display

(U.K. and Europe models only)

CONTROLS AND FUNCTIONS

03V340G_01-08_EN(03.4.14)a.p65 03.4.14, 11:49 AM8

9

English

PREPARATION

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the

mains power until all connections between the

components have been completed.

• Be sure all connections are made correctly, that is to

say L (left) to L, R (right) to R, “+” to “+” and “–” to

“–”. Some components require different connection

methods and have different jack names. Refer to the

operation instructions for each component you wish to

connect to this unit.

• After you have completed all connections, check them

again to make sure they are correct.

• The jack names correspond to the names on the input

selector.

■ Connecting to digital jacks

This unit has digital jacks for direct transmission of

digital signals through either a coaxial or fiber optic

cable. You can use the digital jacks to input PCM, Dolby

Digital and DTS bitstreams. Use digital connections if

you wish to enjoy the multi-channel sound track of DVD

material, etc. with DSP effects. Both digital input jacks

are acceptable for 96 kHz sampling digital signals.

Note

• The OPTICAL jack on this unit conform to the EIA standard.

If you use a fiber optic cable that does not conform to this

standard this unit may not function properly.

6CH INPUT jacks

(page 13)

DIGITAL INPUT jacks

(pages 9 – 11)

Antenna input terminals

(page 12)

Speaker terminals

(page 16)

Video component jacks

(page 10)

Audio component jacks

(page 11)

SUBWOOFER OUTPUT

jack (page 16)

This jack is reserved for factory use.

Do not connect any equipment to this jack.

AUDIO

LR

2

1

AUDIO VIDEO TUNER SPEAKERS

CLASS 2 WIRING

LR

CD DVD

AM

MAIN

A

MAIN

REAR

(

SURROUND

)

CENTER

B

ANT

GND

FM

ANT

IN

(PLAY)

MAIN

DVD

CD

DIGITAL

INPUT

SUB

WOOFER

CENTER

SUB

WOOFER

MONITOR

OUT

SURROUND

OPTICAL

COAXIAL

OUT

(REC)

MD

/CD-R

D-TV

/CBL

V-AUX

IN

VCR

OUT

6CH INPUT OUTPUT

75Ω UNBAL.

MAIN A OR B : 6Ω MIN./SPEAKER

CENTER : 6Ω MIN./SPEAKER

REAR

: 6Ω MIN./SPEAKER

04V340G_09-18_EN(03.3.12)a.p65 03.4.14, 11:49 AM9

10

AUDIO

LR

2

1

AUDIO VIDEO TUNER

LR

CD DVD

AM

ANT

GND

FM

ANT

IN

(PLAY)

MAIN

DVD

CD

DIGITAL

INPUT

SUB

WOOFER

CENTER

SUB

WOOFER

MONITOR

OUT

SURROUND

OPTICAL

COAXIAL

OUT

(REC)

MD

/CD-R

D-TV

/CBL

V-AUX

IN

VCR

OUT

6CH INPUT OUTPUT

75Ω UNBAL.

VIDEO

INPUT

AUDIO

OUTPUT

LR

AUDIO

INPUT

LR

O

OPTICAL

OUTPUT

VIDEO

OUTPUT

AUDIO

OUTPUT

L

V

R

V V

AUDIO

OUTPUT

L R

VIDEO

OUTPUT

V

AUDIO

OUTPUT

L R

VIDEO

OUTPUT

V

VIDEO

INPUT

VIDEO

OUTPUT

O

L

R

V

Connecting video components

■ Connecting a video monitor

Connect the video input jack on your video monitor to the

MONITOR OUT VIDEO jack.

■ Connecting a DVD player

Connect the optical digital audio signal output jack on

your component to the DIGITAL INPUT jack and

connect the video signal output jack on the component to

the VIDEO jack on this unit.

y

• Use the AUDIO jacks on this unit for a video component

which does not have optical digital output jack. However,

multi-channel reproduction cannot be obtained with audio

signals input from the AUDIO jacks.

■ Connecting a digital TV/cable TV

Connect the video signal output jack on your component

to the VIDEO jack on this unit.

Connect the audio signal output jacks on the component

to the AUDIO jacks on this unit.

■ Connecting another video component

Connect the video signal output jack on your component

to the VIDEO jack on this unit.

Connect the audio signal output jacks on the component

to the AUDIO jacks on this unit.

■ Connecting a recording component

Connect the audio signal input jacks on your video

component to the AUDIO OUT jacks on this unit. Then

connect the video signal input jack on the video

component to the VIDEO OUT jack on this unit for

picture recording.

Connect the audio signal output jacks on your component

to the AUDIO IN jacks on this unit. Then connect the

video signal output jack on the component to the VIDEO

IN jack on this unit to play a source from your recording

component.

Note

• Once you have connected a recording component to this unit,

keep its power turned on while using this unit. If the power is

off, this unit may distort the sound from other components.

indicates right analog cables

indicates left analog cables

indicates audio signal direction

Video monitor

VCR

DVD player

TV/digital TV/

cable TV

CONNECTIONS

Another video

component

indicates optical cables

indicates video signal direction

indicates video cables

04V340G_09-18_EN(03.3.12)a.p65 03.4.14, 11:49 AM10

11

English

PREPARATION

Connecting audio components

■ Connecting a CD player

Connect the coaxial digital output jack on your CD player

to the DIGITAL INPUT CD jack on this unit.

y

• Use the AUDIO jacks on this unit to connect to a CD player

that does not have a COAXIAL DIGITAL OUTPUT jack, or

to record from CD players.

■ Connecting a CD recorder or MD

recorder

Connect the input jacks on your CD recorder or MD

recorder to the MD/CD-R OUT (REC) jacks.

Connect the output jacks on your CD recorder or MD

recorder to the MD/CD-R IN (PLAY) jacks to play a

source from your recording component.

indicates right analog cables

indicates left analog cables

indicates signal direction

CD player

indicates coaxial cables

CD recorder or

MD recorder

CONNECTIONS

AUDIO

LR

2

1

AUDIO VIDEO TUNER

LR

CD DVD

AM

ANT

GND

FM

ANT

IN

(PLAY)

MAIN

DVD

CD

DIGITAL

INPUT

SUB

WOOFER

CENTER

SUB

WOOFER

MONITOR

OUT

SURROUND

OPTICAL

COAXIAL

OUT

(REC)

MD

/CD-R

D-TV

/CBL

V-AUX

IN

VCR

OUT

6CH INPUT OUTPUT

75Ω UNBAL.

C

L

R

AUDIO

INPUT

L

R

AUDIO

OUTPUT

L

R

AUDIO

OUTPUT

L

R

COAXIAL

OUTPUT

C

Note

• Once you have connected a recording component to this unit,

keep its power turned on while using this unit. If the power is

off, this unit may distort the sound from other components.

04V340G_09-18_EN(03.3.12)a.p65 03.4.14, 11:49 AM11

12

■ Connecting the AM loop antenna

1 Set up the AM loop antenna, then connect it

to the terminals on this unit.

2 Press and hold the tab to insert the AM loop

antenna lead wires into the AM ANT and

GND terminals.

3 Orient the AM loop antenna for the best

reception.

Notes

• The AM loop antenna should be placed away from this unit.

• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

A properly installed outdoor antenna provides clearer

reception than an indoor one. If you experience poor

reception quality, an outdoor antenna may improve the

quality. Consult the nearest authorized YAMAHA

dealer or service center about the outdoor antennas.

FREQUENCY STEP switch

(General model only)

Because the inter-station frequency spacing differs in

different areas, set the FREQUENCY STEP switch

(located on the rear panel) according to the frequency

spacing in your area.

North, Central and South America: 100 kHz/10 kHz

Other areas: 50 kHz/9 kHz

Before setting this switch, disconnect the AC power

plug of this unit from the AC outlet.

Ground (GND terminal)

For maximum safety and minimum

interference, connect the antenna GND

terminal to a good earth ground. A good

earth ground is a metal stake driven into

moist earth.

Indoor FM

antenna

(included)

AM loop antenna

(included)

Connecting the antennas

Both AM and FM indoor antennas are included with this

unit. In general, these antennas should provide sufficient

signal strength.

Connect each antenna correctly to the designated

terminals.

CONNECTIONS

D

EO TUNER

AM

ANT

GND

FM

ANT

MONITOR

OUT

75Ω UNBAL.

50 kHz/ 9kHz

100 kHz/10kHz

FM/AM

FREQUENCY STEP

04V340G_09-18_EN(03.3.12)a.p65 03.4.14, 11:49 AM12

13

English

PREPARATION

Connecting an external decoder

This unit is equipped with 6 additional input jacks (MAIN

left and right, CENTER, SURROUND left and right and

SUBWOOFER) for discrete multi-channel input from a

component equipped with a multi-channel decoder and 6

channel output jacks such as a DVD/SACD player.

Note

• When you select 6CH INPUT as the input source, the unit

automatically turns off the digital sound field processor, and

you cannot use DSP programs.

CONNECTIONS

DVD/SACD player

2

1

FM

ANT

MAIN

DVD

CD

DIGITAL

INPUT

SUB

WOOFER

CENTER

SUB

WOOFER

MONITOR

OUT

SURROUND

OPTICAL

COAXIAL

OUT

(REC)

/CD

-

R

V-AUX

IN

VCR

OUT

6CH INPUT OUTPUT

75Ω UNBAL.

L R

LR

SUBWOOFER MAIN

CENTER SURROUND

SUBWOOFER MAIN

CENTER SURROUND

04V340G_09-18_EN(03.3.12)a.p65 03.4.14, 11:49 AM13

14

Connecting the speakers

■ Speakers

This unit has been designed to provide the best sound-

field quality with a 5-speaker system, using main left and

right speakers, rear left and right speakers and a center

speaker. If you use different brands of speakers (with

different tonal qualities) in your system, the tone of a

moving human voice and other types of sound may not

shift smoothly. We recommend that you use speakers

from the same manufacturer or speakers with the same

tonal quality.

The main speakers are used for the main source sound

plus effect sounds. They will probably be the speakers

from your present stereo system. The rear speakers are

used for effect and surround sounds. The center speaker is

for the center sounds (dialog, vocals, etc.).

The main speakers should be high-performance models

and have enough power-handling capacity to accept the

maximum output of your audio system. The other

speakers do not have to be equal to the main speakers. For

precise sound localization, however, it is ideal to use the

models of equivalent performance with the main

speakers.

Use of a subwoofer expands your sound field

It is also possible to further expand your system with the

addition of a subwoofer. The use of a subwoofer is

effective not only for reinforcing bass frequencies from

any or all channels, but also for reproducing the LFE

(low-frequency effect) channel with high fidelity when

playing back Dolby Digital or DTS signals. The

YAMAHA Active Servo Processing Subwoofer System is

ideal for natural and lively bass reproduction.

CONNECTIONS

■ Speaker placement

Refer to the following diagram when you place the

speakers.

Main speakers

Place the main left and right speakers an equal distance

from the ideal listening position. The distance between

each speaker and each side of the video monitor should

also be the same.

Center speaker

Align the front face of the center speaker with the front

face of your video monitor. Place the speaker as close to

the monitor as possible (such as directly over or under the

monitor) and centrally between the main speakers.

Rear speakers

Place these speakers behind your listening position,

facing slightly inwards, about 1.8 m (6 feet) above the

floor.

Subwoofer

The position of the subwoofer is not so critical, because

low bass sounds are not highly directional. However, it is

better to place the subwoofer near the main speakers.

Turn it slightly toward the center of the room to reduce

wall reflections.

Note

• If you do not use any of effect speakers (rear and/or center),

change the settings of “SOUND 1 SPEAKER SET” items at

the set menu to direct signals to other terminals you have

connected speakers to.

CAUTION

Use magnetically shielded speakers. If these speakers

still create interference with the monitor, place the

speakers away from the monitor.

Main

speaker (L)

1.8 m (6 feet)

Rear speaker (L)

Rear speaker (R)

Subwoofer

Main speaker (R)

Center speaker

04V340G_09-18_EN(03.3.12)a.p65 03.4.14, 11:49 AM14

15

English

PREPARATION

10 mm (3/8”)

Red: positive (+)

Black: negative (–)

Banana plug

CONNECTIONS

12

■ Connections

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) in accordance with the markers on

this unit, the speakers, and the speaker cables. If the connections are faulty, no sound will be heard from the speakers,

and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

CAUTION

• Use speakers with the specified impedance shown on the rear panel of this unit.

• Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/

or the speakers.

A speaker cord is actually a pair of insulated cables

running side by side. One cable is colored or shaped

differently, perhaps with a stripe, groove or ridge.

1 Remove approximately 10 mm (3/8”) of

insulation from each of the speaker cables.

2 Twist the exposed wires of the cable

together to prevent short circuits.

1 Unscrew the knob.

2 Insert one bare wire into the hole in the side

of each terminal.

3 Tighten the knob to secure the wire.

y

(With the exception of U.K., Europe, Korea, and Singapore

models)

• You can also use banana plug connectors. First, tighten the

knob and then insert the banana plug connector into the end of

the corresponding terminal.

1 Press and open the tab.

2 Insert one bare wire into the hole of each

terminal.

3 Release the tab to secure the wire.

(With the exception of U.K., Europe, Korea, and

Singapore models)

Connecting to the MAIN A SPEAKERS terminals

3

1

2

Red: positive (+)

Black: negative (–)

Connecting to the MAIN B, CENTER and REAR SPEAKERS terminals

1

2

3

04V340G_09-18_EN(03.3.12)a.p65 03.4.14, 11:49 AM15

16

Subwoofer

system

Main B speaker

Center

speaker

Right

Rear speaker

SUBWOOFER jack

When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System,

connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the

main, center and/or rear channels to this jack in accordance with your SPEAKER SET selections. The LFE (low-

frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance

with your SPEAKER SET selections.

Notes

• The cut-off frequency of the SUBWOOFER jack is 90 Hz.

• If you do not use a subwoofer, allocate the signals to the main left and right speakers by changing the setting of “SOUND 1

SPEAKER SET” item “1D BASS” on the set menu to MAIN.

• Use the control on the subwoofer to adjust its volume level. You can also adjust the volume level by using this unit’s remote control

(see “SETTING THE SPEAKER LEVELS” on page 45).

Right Left

Main A speaker

Right Left Left

MAIN SPEAKERS terminals

You can connect up to two speaker systems to these

terminals. When using only one speaker system, connect

it to either of the MAIN A or the MAIN B terminals.

REAR SPEAKERS terminals

A rear speaker system can be connected to these

terminals.

CENTER SPEAKER terminals

A center speaker can be connected to these terminals.

CONNECTIONS

The diagram shows the speaker layout in the listening

room.

AUDIO

LR

2

1

AUDIO VIDEO TUNER SPEAKERS

CLASS 2 WIRING

LR

CD DVD

AM

MAIN

A

MAIN

REAR

(

SURROUND

)

CENTER

B

ANT

GND

FM

ANT

IN

(PLAY)

MAIN

DVD

CD

DIGITAL

INPUT

SUB

WOOFER

CENTER

SUB

WOOFER

MONITOR

OUT

SURROUND

OPTICAL

COAXIAL

OUT

(REC)

MD

/CD-R

D-TV

/CBL

V-AUX

IN

VCR

OUT

6CH INPUT OUTPUT

75Ω UNBAL.

MAIN A OR B : 6Ω MIN./SPEAKER

CENTER : 6Ω MIN./SPEAKER

REAR

: 6Ω MIN./SPEAKER

3

65

21

4

1

2

4

3

6

5

04V340G_09-18_EN(03.3.12)a.p65 03.4.14, 11:49 AM16

17

English

PREPARATION

Connecting the power supply

cords

■ Connecting the AC power cord

Plug in this unit to a wall outlet.

■ VOLTAGE SELECTOR

(General model only)

The VOLTAGE SELECTOR on the rear panel of this unit

must be set for your local main voltage BEFORE

plugging into the AC main supply. Voltages are 110V-

120V/220V-240V AC, 50/60 Hz.

VOLTAGE SELECTOR

Turning on the power

When all connections are complete, turn on the power of

this unit.

1 Press STANDBY/ON (POWER on the remote

control) to turn on the power of this unit.

The level of the main volume, and then the current

DSP program name appear on the front panel

display.

or

Remote control

Front panel

(General model)

CONNECTIONS

L

REAR

U

RROUND

)

110V-120V

220V-240V

N

./SPEAKER

N

./SPEAKER

VOLTAGE

SELECTOR

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

1

TEST

PROG PROG

STEREO

TUNER

CD MD/CD-R V-AUX 6CH IN

/D T S 6.1/ 5.1 NIGHT SLEEP

DVD D-TV/CBL VCR POWER

PRESET

A/B/C/D/E

VOLUME

1

STANDBY

/ON

POWER

04V340G_09-18_EN(03.3.12)a.p65 03.4.14, 11:49 AM17

18

Using the basic menu

Use the remote control to make adjustments.

• Press SPEAKERS A/B on the front panel to select the

main speakers you want to use, and set SPEAKERS

ON/OFF to the ON position.

• Make sure you disconnect headphones from this unit.

1 Press SET MENU.

“BASIC MENU” appears on the front panel display,

as shown here.

If the front panel display

changes to show anything

other than “BASIC MENU”,

press u until it displays

“BASIC MENU”.

2 Press –/+ to enter into the BASIC menu.

The front panel display changes as shown here:

BASIC SYSTEM SETTINGS

The “BASIC” menu allows you to set some of the basic “SOUND” menu parameters with a minimum of effort. If you

wish to configure the unit more precisely to suit your listening environment, use the more detailed parameters from the

“SOUND” menu instead of those under the “BASIC” menu (See page 40). Altering any parameters in the BASIC menu

will reset all parameters in the “SOUND” menu.

TEST

PROG PROG

STEREO

LEVEL

SET MENU

MUTE

VOLUME

1

2,4

3,6

3 Press u / d to change the display to the

setting you want to alter.

SETUP

Changes the speaker and amplifier settings to suit the

size of the room you are using. Refer to “Setting the

unit to match your speaker system” on page 20 for

more information.

SP LEVEL

Adjusts the output levels of the speakers.

Refer to “Setting speaker output levels” on page 20

for more information.

4 Press –/+ to enter the desired setting mode.

5 Change the unit settings to suit your

listening environment. When you have

finished, the unit will automatically return to

the basic menu.

6 Press u / d to exit from the set menu.

The front panel display changes in the following

order:

BASIC MENU

1 SETUP

↑

BASIC

↓↑

SOUND

↓↑

INPUT

↓↑

OPTION

↓

Exit

SET MENU

05V340G_19-21_EN(03.3.18)a.p65 03.4.14, 11:49 AM18

Sayfa yükleniyor ...

Yamaha RX-V340RDS El kitabı

Yamaha RX-V340RDS El kitabı

Diğer dillerde

İlgili Makaleler