Yamaha MOX8 El kitabı

Marka: Yamaha

Modeli: MOX8

Tip: El kitabı

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

MOX6
V1

MOX6/MOX8 Editor VST Installation Guide 1

ATTENTION

PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY

PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS

BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”).

BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS

OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS

SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE

SOFTWARE.

1. GRANT OF LICENSE AND COPYRIGHT

Yamaha hereby grants you the right to use one copy of the software program(s) and data (“SOFTWARE”) accompanying this Agreement. The

term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or Yamaha’s

licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data

created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.

• You may use the SOFTWARE on your computer.

• You m ay make one copy of the SOFTWARE in machine-readable form for backup purposes only, if the SOFTWARE is on media where

such backup copy is permitted. On the backup copy, you must reproduce Yamaha's copyright notice and any other proprietary legends

that were on the original copy of the SOFTWARE.

• You m ay permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the

recipient reads and agrees to the terms of this Agreement.

2. RESTRICTIONS

• You m ay n o t engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE

by any method whatsoever.

• You m ay n o t reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the

SOFTWARE.

• You m ay n o t electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other

computers.

• You m ay n o t use the SOFTWARE to distribute illegal data or data that violates public policy.

• You m ay n o t initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.

Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following

restrictions which you must observe.

• Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.

• Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners

in public without permission of the copyright owner.

• The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified

without permission of the copyright owner.

3. TERMINATION

This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or

provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such

termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.

4. DISCLAIMER OF WARRANTY ON SOFTWARE

You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided

“AS IS” and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY

DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.

SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR

REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE

SOFTWARE WILL BE CORRECTED.

SOFTWARE LICENSING AGREEMENT

MOX6/MOX8 Editor VST

Installation Guide

MOX6/MOX8 Editor VST

Installation Guide

MOX6/MOX8 Editor VST Installation Guide 2

5. LIMITATION OF LIABILITY

YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT

SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF

THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in

contract, tort or otherwise) exceed the amount paid for the SOFTWARE.

6. THIRD PARTY SOFTWARE

Third party software and data (“THIRD PARTY SOFTWARE”) may be attached to the SOFTWARE. If, in the written materials or the electronic data

accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must

abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY

SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any

way for the THIRD PARTY SOFTWARE or your use thereof.

• Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL

IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.

• Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.

• Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or

consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD

PARTY SOFTWARE.

7. G E N E R A L

This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute

or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this

Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.

8. COMPLETE AGREEMENT

This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written

materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this

Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of

Yamaha.

• The software and this Installation Guide are the exclusive copyrights of Yamaha Corporation.

• Please read carefully the Software Licensing Agreement at the front of this Installation Guide before installing the application.

• Copying of the software or reproduction of this Installation Guide in whole or in part by any means is expressly forbidden without the written

consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for

the results of the use of this Installation Guide and the software.

• Future upgrades of application and system software (e.g., firmware of the products) and any changes in specifications and functions will be

announced at the following website. http://www.yamahasynth.com/

• The screen displays as illustrated in this Installation Guide are for instructional purposes, and may appear somewhat different from the

screens which appear on your computer.

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for

your personal use.

• Windows is the registered trademarks of Microsoft

Corporation.

• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.

• Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.

• The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies.

Special Notices

MOX6/MOX8 Editor VST Installation Guide 3

MOX6/MOX8 Editor VST is a convenient tool which lets you edit and save the various parameters of your MOX6/

MOX8 synthesizer. These include Common/Part Mixing parameters (edited in the Song or Pattern mode of the

MOX6/MOX8) such as Volume, Pan, EG, and Cutoff, as well as parameters of a Voices assigned to each Part

(edited in the Voice mode of the MOX6/MOX8). Thanks to the easy-to-understand graphical interface, you can edit

various parameters of the MOX6/MOX8 right from your computer—using the mouse to adjust the virtual knobs,

sliders, and buttons and entering values from the computer keyboard. Finally, all the changes you have made can

be saved to your computer or transmitted to the MOX6/MOX8 instrument.

The MOX6/MOX8 Editor VST, based on the “VST3 technology” by Steinberg, works as a VST3 plug-in with the

Cubase series (version 5.1.1 or later). The MOX6/MOX8 Editor VST also works as the same way as other VST

instrument software, allowing you to save the edited settings of the MOX6/MOX8, or use them for another project. In

addition, you can handle the MOX6/MOX8 Voices in the Media Bay window in Cubase when using the MOX6/MOX8

Editor VST with Cubase, allowing you to search for, listen, and play the MOX6/MOX8 Voices within Media Bay in

Cubase series. The MOX6/MOX8 Editor VST provides a comprehensive and seamless music production

environment—making the use of hardware and software both easier and much more efficient.

The actual installation steps and the use of the software itself differs depending on the operating system that you

are using. Please refer to the appropriate installation instructions.

1 Verify that your system (Cubase series) meets the operating requirements of each software

program.

....................................................................................................................................................................... page 4

2 Install the appropriate driver to your computer.......................................................................................... page 4

3 Install the MOX6/MOX8 Editor VST................................................................................................................... page 5

4 Start up the MOX6/MOX8 Editor VST in the Cubase series................................................................... page 5

For subsequent operations, refer to the PDF manual accessed from the [HELP] menu in the respective software

program.

Precautions when using the USB TO HOST connector

When connecting the computer to the USB TO HOST connector, make sure to observe the following points. Failing to do so

risks freezing the computer and corrupting or even losing the data. If the computer or the instrument freezes, turn the power

to the instrument off or restart the computer.

• Before connecting the computer to the USB TO HOST connector, exit from any power-saving mode (such

as suspended, sleep, standby) of the computer.

• Before turning on the power to the instrument, connect the computer to the USB TO HOST connector.

• Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB

cable to/from the USB TO HOST connector.

- Quit any open applications.

- Make sure that data is not being transmitted from the instrument. (Data is transmitted only by playing

notes on the keyboard or playing back a song.)

• While a USB device is connected to the instrument, you should wait for six seconds or more between these

operations: (1) when turning the power of the instrument off then on again, or (2) when alternately

connecting/disconnecting the USB cable.

MOX6/MOX8 Editor VST

Installing the Software

NOTICE

MOX6/MOX8 Editor VST Installation Guide 4

These are basically the same as those of the Cubase series (version 5.1.1 or later) as a host application. Regarding

Mac OS, only Mac OS 10.5 or later is supported. Note that this software does not support PowerPC architectures.

To use the MOX6/MOX8 Editor VST as a VST3 plug-in of the Cubase series, you’ll need to install the following

software programs. Follow the appropriate instructions below corresponding to the software you’re using.

• Yamaha Steinberg USB Driver

• MOX6/MOX8 Editor VST

Driver Installation

To operate your Yamaha hardware from your computer via a USB cable, you’ll need to install the Yamaha Steinberg

USB Driver.

The Yamaha Steinberg USB Driver is necessary when transferring Audio/MIDI data back and forth between your

computer’s Cubase series and the MOX6/MOX8.

n MOX6/MOX8 Editor VST cannot be used over a MIDI connection.

n The MOX6/MOX8 Editor VST will transmit/receive the related messages as MIDI messages to/from the MOX6/MOX8 only when the

computer to which Yamaha Steinberg USB driver has been installed is connected directly to the MOX6/MOX8 via USB. Note that the

different connection manner (via MIDI cables, etc.) disables the communication of the Editor related messages. Even if such a

connection is executed, make sure to connect the MOX6/MOX8 directly to the computer via USB.

Minimum System Requirements

Software Installation

Make sure to check the following website for installation and up-to-date news on the Yamaha Steinberg USB Driver.

http://www.yamahasynth.com/downloads/

Cubase

series

USB cable

Driver

Computer

MOX6/MOX8

MOX6/MOX8 Editor VST Installation Guide 5

MOX6/MOX8 Editor VST Installation

Follow the instructions below to install the MOX6/MOX8 Editor VST programs.

Windows

1 After the downloaded compressed file is properly extracted, double-click the “Install

MOX6_MOX8 Editor VST 32bit.exe” / “Install MOX6_MOX8 Editor VST 64bit.exe” file.

The MOX6/MOX8 Editor VST setup dialog appears.

n Make sure to log on to the “Administrator” account before installing MOX6/MOX8 Editor VST.

n If the “User Account Control” window appears, click [Continue] or [Yes].

2 Follow the on-screen instructions to install the software.

Mac

1 After the downloaded compressed file is properly extracted, double-click the “Install

MOX6_MOX8 Editor VST.pkg” file.

The MOX6/MOX8 Editor VST setup dialog appears.

2 Follow the on-screen instructions to install the software.

When the MOX6/MOX8 Editor VST and the other necessary software is installed, you can start the MOX6/MOX8

Editor VST. You’ll need to start the MOX6/MOX8 Editor VST from the VST window of Cubase series. For details

about starting and setting up Cubase series, refer to the manual of the Cubase series.

To remove the installed editors from your computer, follow the instructions below.

n The button names or menus may differ depending on the computer OS.

When using Windows Vista / 7

Select [Start]  [Control Panel]  [Programs and Features] or [Uninstall a program], then select the application to

be remove and click [Uninstall/Change].

Follow the on-screen instructions to uninstall the application.

If the “User Account Control” window appears, click [Continue] or [Yes].

When using Windows XP

Select [START]  [Control Panel]  [Add/Remove Programs]  [Install/Uninstall], then select the application to be

removed and click [Add/Remove…].

Follow the on-screen instructions to uninstall the application.

Mac

After the downloaded compressed file is properly extracted, double-click the “Uninstall MOX6_ MOX8 Editor

VST.app” file, then follow the on-screen instructions to uninstall the application.

Software Uninstall (removing the installed application)

MOX6/MOX8 Editor VST Installation Guide 6

An audio connection between the MOX6/MOX8 instrument and the computer is needed to use the MOX6/MOX8

Editor VST correctly. With such a connection, the MOX6/MOX8 Editor VST provides full functionality, including the

freeze function, mixing within the Audio Mixer of Cubase series, and other convenient features common to other

VST instrument software.

When connecting the computer and instrument directly via Yamaha Steinberg USB driver, the audio connection

(Port settings, etc.) will be set automatically.

When connecting the computer and instrument by using the separate audio interface via Yamaha Steinberg USB

driver, you should set the audio connection manually. After installing the audio interface driver correctly, select the

audio ports in the VSTi Setup window within the MOX6/MOX8 Editor VST

n When using the MIDI connection via Yamaha Steinberg USB Driver, you need to select the audio ports in the VSTi Setup window. If no

audio port is selected, or no audio device is installed to the computer, an error message appears. Make sure to set the audio ports in the

VSTi Setup window.

When starting the MOX6/MOX8 Editor VST after the installation and controlling the MOX6/MOX8

from your computer via the USB cable, the MOX6/MOX8 does not operate correctly.

• Did you install the latest driver? ..................................................................................................................... page 4

• Is the USB cable used to connect the MOX6/MOX8 to your computer connected correctly?

....................................................................................................................................................... MOX6/MOX8 Owner’s Manual

• If your computer has automatically activated any power-saving mode (such as suspended, sleep, standby) when

you make the USB connection, the computer may “freeze,” or the driver may stop working. When using the Yamaha

Steinberg USB Driver, disable any power-saving mode on the computer.

• Confirm whether or not a proper USB cable is used.

If the USB cable is broken or damaged, have the USB cable replaced with a known working one.

• Do not use a USB hub for connecting multiple USB devices.

Screen redrawing is slow or stopped.

• Does your computer satisfy the system requirements?.................................................................................. page 4

• Is any other application or device driver running?

Quit the device driver or any unnecessary applications before operating the MOX6/MOX8 Editor VST.

Audio Connection to the Computer

Troubleshooting