Yamaha V2 El kitabı

Kategori
Ses dengeleyiciler
Tip
El kitabı

Bu kılavuz için de uygundur

M7CL V2 Editor Owner’s Manual
1
Special Notices
•The software and this owner’s manual are the exclu-
sive copyrights of Yamaha Corporation.
•Copying of the software or reproduction of this
manual in whole or in part by any means is expressly
forbidden without the written consent of the manu-
facturer.
•Copying of the commercially available music
sequence data and/or digital audio files is strictly
prohibited except for your personal use.
•Yamaha makes no representations or warranties
with regard to the use of the software and documen-
tation and cannot be held responsible for the results
of the use of this manual and the software.
•The screen displays as illustrated in this owner’s
manual are for instructional purposes, and may
appear somewhat different from the screens which
appear on your computer.
•For information on modification of system soft-
ware, certain functions, or specifications due to ver-
sion update of the application, please visit the
following website:
http://www.yamahaproaudio.com/
•Windows is a registered trademark of Microsoft
Corporation in the United States of America and
other countries.
•The company names and product names in this
Owner’s Manual are the trademarks or registered
trademarks of their respective companies.
Yamaha Pro Audio Global Site
http://www.yamahaproaudio.com/
Contents
Getting Started ......................................... 2
Master window ......................................... 9
Overview window ................................... 11
Selected Channel window....................... 23
Library window ....................................... 42
Patch Editor window............................... 45
Rack window ........................................... 49
Meter window ......................................... 58
Group/Link window ................................ 60
Scene window ......................................... 64
Keyboard Shortcuts................................. 72
Index........................................................ 73
*Specifications and descriptions in this owner ’s manual are
for information purposes only. Yamaha Corp. reserves the
right to change or modify products or specifications at any
time without prior notice.
M7CL V2 Editor
M7CL V2 Editor
M7CL V2 Editor
Owner’s Manual
Owner’s Manual
Owner’s Manual
M7CL V2 Editor Owner’s Manual
2
Overview of M7CL V2 Editor
M7CL V2 Editor (hereinafter called “M7CL Editor” in this document) enables you to remotely control a Yamaha
M7CL mixing console (Version 2) (such as M7CL-48 or M7CL-32; hereinafter collectively called “M7CL in this doc-
ument). M7CL V2 Editor also enables you to save the parameter settings on your computer. To use M7CL Editor, you
must first perform the following operations:
1 Start and configure Studio Manager.
2 Start and configure M7CL Editor.
3 Synchronize M7CL Editor with your M7CL console (
p.8).
For more information on using Studio Manager, refer to the Studio Manager Owner’s Manual.
Configuring M7CL Editor
You must configure the following settings for each open Editor.
Before you make the following settings, you must make settings for the DME-N Network Driver and
select the MIDI port in the Setup window of Studio Manager.
•To open an editor, double-click the icon for the desired editor in the Studio Manager window.
System Setup
To open the System Setup window, choose [System Setup] from the [File] menu.
Be sure to specify the Input port and Output port.
A
Input port/Output port
From the ports you specified in Studio Man-
ager, select the ports that the editor will use
to communicate with the M7CL console.
B
Fast Sync
This allows synchronization to be speed up,
reducing the time required. Use this check
box to choose whether to enable this func-
tion.
C
Window Control from Console
This option determines whether or not using
the USER DEFINED KEYS on the console
enables you to remotely open and close the
M7CL Editor windows.
D
Level Meter
By disabling the meter function you can reduce the processing load caused by screen drawing and communica-
tion. This option specifies whether the level meter functionality will be enabled.
E
Confirmation
These check boxes specify whether a confirmation dialog box will appear when you store (Store Confirmation),
recall (Recall Confirmation), patch (Patch Confirmation), or make a patch change that would modify an existing
patch (Steal Patch Confirmation).
F
Administrator Password
Enter the Administrator password that was specified on the M7CL console. If this password is not entered cor-
rectly, it will not be possible to synchronize from M7CL Editor to the M7CL console.
Getting Started
NOTE
NOTE
NOTE
2
5
6
3
4
1
M7CL V2 Editor Owner’s Manual
3
Mixer Setup
To open the Mixer Setup window, choose [Mixer Setup] from the [File] menu.
A
Input Channels
Specify the number of input channels on the M7CL console. When the editor is synchronized with the M7CL
console, the actual number of channels on the M7CL console will automatically be specified here.
B
Mix Bus Setup
Here you can make settings relating to the MIX buses.
Signal Type:
Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered MIX
buses.
Bus Type/Send Point:
Choose either VARI (PRE FADER) or VARI (PRE EQ) or FIXED for each two adja-
cent odd-numbered/even-numbered MIX buses.
Pan Link:
This is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI. If this is
enabled, the pan setting sent to stereo MIX buses will be linked with the pan setting to the STEREO bus.
C
Matrix Bus Setup
Here you can make settings relating to the MATRIX buses.
Signal Type:
Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered
MATRIX buses.
Bus Type/Send Point:
Choose either PRE FADER or PRE EQ for each two adjacent odd-numbered/even-
numbered MATRIX buses.
Pan Link:
This is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI. If this is
enabled, the pan setting sent to stereo MATRIX buses will be linked with the pan setting to the STEREO bus.
1
2
3
M7CL V2 Editor Owner’s Manual
4
Creating a user key
To open the Create User Key window, choose [Create User Key] from the [File] menu.
This creates a user key (with .M7U” file name extension) that can be read from a USB storage device by the
M7CL console to automatically set user-specific parameters.
A
User Name
Specify the name of the user. You can enter up to eight single-byte characters of alphabet and numerals.
B
Comment
Enter a comment for each user. You can enter up to thirty-two single-byte alphanumeric characters.
C
Password
Enter a password that will be used when this user key is read by the M7CL console. You can enter up to eight sin-
gle-byte alphanumeric characters. Uppercase and lowercase are distinguished.
D
Re-Enter Password
Enter the password once again as a safeguard against mistaken entry.
E
POWER USER
Specify whether this user is a power user. Power users can use the M7CL console to create or edit a user authenti-
cation key with a specified user level.
F
Administrator Password
Enter the Administrator password that was specified on the M7CL console. This is not required if no Administra-
tor password has been specified on the M7CL console, but if this password is incorrect you will be asked to enter
it when the user key is read.
G
ACCESS PERMISSION
In this area, specify the parameters that this user will be allowed to operate.
2 465
1
3
7
8
9
J
K
L
N
O P
M
M7CL V2 Editor Owner’s Manual
5
H
CH OPERATION
INPUT, ST IN, DCA, MIX, MATRIX, ST/MONO:
Select the channels whose parameters will be opera-
ble.
HA:
Change the operating privileges for the head amp gain and phantom power of the selected channels.
PROCESSING:
Change the operating privileges for overall signal processing parameters (except for fader
and [ON] key) of the selected channel. For the specific parameters included in PROCESSING, refer to the
appendix of the M7CL owner’s manual.
FADER/ON:
Change the operating privileges for the pan/balance, fader, channel on, send on/off, and send
level of the selected channels.
Set All:
Turn on HA, PROCESSING, and FADER/ON for all channels.
Clear All:
Turn off HA, PROCESSING, and FADER/ON for all channels.
Set by One Click:
If this button is on, HA, PROCESSING, and FADER/ON will all be turned on when you
select a channel. If all are already on, all will be turned off.
I
SCENE LIST
STORE/SORT:
Change the operating privileges for scene store and sort operations.
RECALL:
Change the operating privileges for scene recall operations.
J
LIBRARY LIST
STORE/CLEAR:
Change the operating privileges for library store and clear operations.
RECALL:
Change the operating privileges for library recall operations.
K
FILE LOAD
USER SETUP:
Change the operating privileges for loading user-defined keys and preferences when loading a
file.
SYSTEM SETUP MONITOR SETUP:
Change the operating privileges for loading system setup and moni-
tor setup settings when loading a file.
CURRENT SCENE:
Change the operating privileges for loading the current scene when loading a file.
SCENE LIST:
Change the operating privileges for loading the scene list when loading a file.
LIBRARY LIST:
Change the operating privileges for loading the library list when loading a file.
L
CURRENT SCENE
INPUT PATCH:
Change the operating privileges for input patch operations.
INPUT NAME:
Change the privileges for editing the input names.
OUTPUT PATCH:
Change the operating privileges for output patching.
OUTPUT NAME:
Change the privileges for editing the output names.
BUS SETUP:
Change the operating privileges for buses.
RACK:
Change the operating privileges for rack operations.
MUTE GROUP ASSIGN: Change the privileges for assigning mute groups.
MUTE GROUP MASTER: Change the operating privileges for enabling/disabling mute groups.
M MONITOR SETUP
OSCILLATOR: Change the operating privileges for oscillator settings.
TALKBACK: Change the operating privileges for talkback settings.
N SYSTEM SETUP
MIXER SETUP: Change the privileges for making mixer setup settings.
OUTPORT SETUP: Change the privileges for making outport setup settings.
MIDI: Change the privileges for making MIDI settings.
O Create
Creates the user key.
P Cancel
Closes the window.
M7CL V2 Editor Owner’s Manual
6
Working with Sessions
All of your console’s mix settings in M7CL Editor, including Scene and library data, are called Sessions.
The following table describes how to handle Sessions.
When you save a session in the window of an editor, the settings of only that editor will be saved in a file. Session files
saved by M7CL Editor have a filename extension of .YSE”. Files in which only the M7CL console data is saved (file-
name extension .M7C”) can also be handled, allowing you to use a USB storage device to exchange data with the
M7CL console.
If you save a Session in the Studio Manager window, all selected Editor settings are saved in a file with a file extension
of.YSM.
With M7CL V2 Editor, you can open files that include the extension .M7C or .YSE that have been
saved on the M7CL Version 1 console or in M7CL Editor Version 1, but not vice versa. That is, with the
M7CL Version 1 console or M7CL Editor Version 1, you cannot open files that have been saved in M7CL
V2 Editor.
Undo/Redo Function
In M7CL Editor, you can cancel the latest operation (Undo) and also cancel the cancellation of the latest operation
(Redo). If you perform an Undo operation twice in a row, you can cancel the two most-recent operations. If you per-
form an Undo operation three times in a row, you can cancel the three most-recent operations. In this way, you can
cancel multiple recent operations. The following table describes how to use the Undo/Redo function.
Please note, however, that after you perform one of the following operations, you cannot successfully undo or redo
any previous operation:
•Operations on the M7CL console
Quitting Studio Manager
•Synchronizing with the M7CL console
•Session operations
You cannot Undo or Redo the following operations:
• Edits in the Setup window
• Synchronization
• Opening and closing the windows
• Resizing or moving the windows
There are certain other operations that cannot be undone, depending on the function.
For library or scene operations, Undo/Redo applies only to the single most recent operation. You cannot
undo any operations prior to this. Undo/Redo in these windows is available only using the [UNDO] button
within the respective window. Even if you perform a scene recall from the Master window, you cannot use
a shortcut or menu operation to undo the recall.
Creating a new Session Choose [New Session] from the [File] menu.
Opening a previously saved Session Choose [Open Session] from the [File] menu.
Saving the current Session Choose [Save Session] from the [File] menu.
Saving the current Session with a new name Choose [Save Session As...] from the [File] menu.
Undo Choose [Undo] from the [Edit] menu.
Redo Choose [Redo] from the [Edit] menu.
NOTE
NOTE
NOTE
M7CL V2 Editor Owner’s Manual
7
Window operations
You can select and open each window from the [Win-
dows] menu. For the INPUT CH window and Effect Edi-
tor window, use the sub-menu to select the channels or
library you want to see.
You can choose Tile or Cascade to arrange the windows within the editor.
In the Library window or Scene window, click the tabs
located at the top of the window to switch between
pages.
Cascade Tile
M7CL V2 Editor Owner’s Manual
8
Synchronizing M7CL Editor
When M7CL Editor starts up, the parameter settings on the console and the parameter settings in M7CL Editor may
be different. Therefore, you must first match the parameter settings on the console with those in M7CL Editor. This
operation is called “synchronization. Follow the steps below to synchronize M7CL Editor.
1 Select [Synchronize], then [Re-synchronize].
The following window opens.
2 Select whether you want to transfer your settings to M7CL
Editor, or vice versa.
At this time, the All Libs option determines whether or not Scene and
Library data is synchronized.
PC Console: Tr ansfers the current parameter settings in M7CL Editor to your console.
Console PC: Tr ansfers the current parameter settings of your console to the M7CL Editor.
3 Click [OK].
Do not operate the console while synchronization is in progress.
If you use the “Total Recall” function in Studio Manager, all selected Editors in Studio Manager are syn-
chronized with the corresponding devices.
Offline Edit Function
If you do not want to synchronize your console with M7CL Editor, select [Offline Edit] from the [Synchronization]
menu. To apply your off-line edits to your console, select [Re-Synchronize] from the [Synchronization] with the PC
-> Console option to synchronize the console with M7CL Editor.
The Offline Edit function is also activated when you click the [ONLINE]/[OFFLINE] button in the Sync window.
Some effect parameters in the console change their displayed values depending on the sampling fre-
quency. If you switch M7CL Editor from OFFLINE to ONLINE, displayed parameter values may change
because M7CL Editor loads the sampling frequency from the console and updates the display.
Other Functions
Resetting to the default value (Ctrl+click)
Move the cursor to a control or a parameter value, then hold down the <Ctrl> key and click the mouse button to
reset the value to the default (e.g., to reset a pan setting to Center).
Ctrl+Shift+Click
Move the mouse cursor to a channel fader or to a send knob or bar graph, and click while holding down the
<Ctrl> key and <Shift> key to set the nominal value regardless of the default value.
NOTE
NOTE
M7CL V2 Editor Owner’s Manual
9
In the Master window you can synchronize to the M7CL itself, recall scenes, and display the Overview window. To
open this window, choose [Master] from the [Windows] menu.
CHANNEL SELECT
This indicates the number and name of the channel to which your operations will apply. To
switch channels, you can either click the [SELECT] button and choose from the list that
appears, or you can click the left/right arrow-shaped channel select buttons. You can also
use the channel name text box to edit the name.
This is linked with the [SEL] keys on the M7CL itself.
You can right-click the icon to select a different one.
SYNC
This indicates the status of connection and synchronization between M7CL Editor and the M7CL.
A [ONLINE]/[OFFLINE] button
The ONLINE/OFFLINE status will alternate each time you click this button.
This has the same function as [Synchronization] menu [Offline Edit]. ( p.8)
This indicator is shown when M7CL Editor is correctly con-
nected to the M7CL itself. In this state, the parameters of M7LC
Editor and the M7CL itself are linked.
This indicator is shown when M7CL Editor and the M7CL itself
are not connected, or when there is a problem with the connec-
tion, or when Offline Edit is selected. In this state, the parame-
ters of M7CL Editor and the M7CL itself are not linked.
B [RE-SYNC] button
Clicking this button opens the Synchronization dialog box.
This has the same function as [Synchronization] menu [Re-Synchronize]. ( p.8)
Master window
1 2
M7CL V2 Editor Owner’s Manual
10
SCENE MEMORY
Here you can view the currently-recalled scene, and recall or store scenes.
A Scene number display
Indicates the number of the scene that is selected for store or recall.
BProtect indicator
The lock icon is displayed for scene memories that are protected.
CEdit indicator
The edit indicator will light when you edit the parameters after recalling a scene.
D [STORE] button
This button stores the current scene into the number shown by the scene number dis-
play (
1).
E []/[] buttons
These buttons increment or decrement the number shown in the scene number display
(
1). The scene number display (1) will blink until you actually store or recall, and
while blinking will not match the scene number indicated on the M7CL.
F [RECALL] button
This button recalls the scene of the number shown in the scene number display (1).
Navigation Keys
These keys open various windows.
These are not linked with the navigation key section on the panel of the M7CL itself.
A [17-32] button
Opens the INPUT CH 17–32 window.
B [1-16] button
Opens the INPUT CH 1–16 window.
C [ST IN] button
Opens the ST IN window.
D [DCA] button
Opens the DCA window.
E [STEREO] button
Opens the STEREO/MONO window.
F [MIX] button
Opens the MIX window.
G [MTRX] button
Opens the MATRIX window.
H [33-48] button
Opens the INPUT CH 33–48 window. This is available only during offline editing and
when 48 is selected as the number of input channels in the Mixer Setup window, or
when editing online with the M7CL-48.
1
4
3
5
6
2
1
2
3
4
876
5
NOTE
M7CL V2 Editor Owner’s Manual
11
INPUT CH window
This window displays the mix parameters of INPUT CH 1–16, 17–32, or 33–48
(
*
)
. The parameters shown in the
window can be selected from the [View] menu or the menu that appears when you right-click in the window.
You can access this window in the following ways.
From the [Windows] menu, choose [Overview] and select “CH1-16” / “CH17-32” / “CH33-48”
(
*
)
Use the navigation keys in the Master window to turn on the [1-16] button / [17-32] button / [33-48] button
(
*
)
On the M7CL itself, assign one of the USER DEFINED KEYS to [1-16]/[17-32]/[33-48]
(
*
)
in [INPUT CH] of [M7CL
EDITOR CONTROL], and execute the function
(
*
)
INPUT CH 33-48 can be viewed only if 48 is selected in the Input Channels field of the Mixer Setup window when editing offline, or
when editing online with the M7CL-48.
A Input patch
Click here to select the input source that will be assigned to the INPUT CH, from the
following choices.
(*) AD33–48 (INPUT jacks 33-48) can be viewed only if 48 is selected in the Input Channels field of the
Mixer Setup window when editing offline, or when editing online with the M7CL-48.
B HA GAIN
Drag the knob in the screen to adjust the gain of the internal head amp or of the exter-
nal head amp (AD8HR) patched to the INPUT CH.
C 48V
Switches on/off the phantom power (+48V) of the internal head amp or of the external
head amp (AD8HR) patched to the INPUT CH.
NONE No assignment
IN1–IN48
(
*
)
INPUT jacks 1–48
(
*
)
STIN1L–STIN4R L/R channels of ST IN jacks 1–4
SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16
Input channels of an I/O card installed in slots
1–3
RACK1A, RACK1B...RACK8R(B) L/R outputs of Rack 1–8
Overview window
1
2
3
M7CL V2 Editor Owner’s Manual
12
D Ø (Phase)
Inverts the phase of the signal after AD conversion.
E HPF (High Pass Filter)
Switches the high pass filter on/off. You can drag the numeric value up or down to edit
the cutoff frequency.
F INS (Insert)
Enables/disables the insert-in.
G D. OUT (Direct out)
Enables/disables the direct output.
H EQ (Equalizer)
Switches the EQ on/off. The graph immediately below the button shows the approxi-
mate response of the EQ. You can drag within the graph to edit the response of the EQ.
To reset the EQ to flat response, hold down the <Ctrl> key of your computer keyboard
and click the grap (The HPF setting will remain).
I DYN1/DYN2 (Dynamics 1/Dynamics 2)
Tur ns the two dynamics processors on/off.
If Gate is assigned (Dynamics 1 only), the status of the gate is shown immediately below
the button.
If something other than Gate is assigned, a GR meter is shown immediately below the
button, and the amount of gain reduction is shown while this is on.
The type for each dynamics processor can be selected in the Selected Channel window.
J MIX/MATRIX SEND
Switches between the send indications to MIX buses
1–16 and to MATRIX buses 1–8.
The bar graphs located immediately below the button
show the send level of the signals sent from the INPUT
CH to VARI type MIX/MATRIX buses. You can also
drag the bar graph to left or right to set the send level.
While you drag the bar graph, the send level is shown
in the numerical display area for PAN/TO STEREO
MONO (
K).
You can set the minimum value (– dB) by holding
down the <Ctrl> key of your computer keyboard and
clicking the bar graph, or set the nominal value
(0.00 dB) by holding down the <Ctrl> key and <Shift>
key and clicking the bar graph.
The bar graph display will change according to the
send position (pre/post) and on/off status of the signal
sent from the INPUT CH to the MIX/MATRIX buses.
To switch a send on/off, click the channel number
located at the left of the bar graph.
For FIXED-type MIX buses, the bar graph is fixed at nominal level (0 dB),
and only the on/off status is shown.
Gate status
indication
On/off status On
On On
Off
Open/closed
status
Closed Open
Open
Remarks
Gain reduction amount
is 30 dB or more
Gain reduction
amount is 0–30 dB
Gain reduction
amount is 0 dB
4
6
7
8
5
9
J
• Pre/on (green)
• Pre/off (green)
• Post/on (yellow)
• Post/off (yellow)
NOTE
M7CL V2 Editor Owner’s Manual
13
K PAN/TO STEREO MONO
The PAN knob adjusts the panning of the signal that is sent from the INPUT CH to the
STEREO bus L/R channels (or the L/C/R channels). You can set this to the center value
by holding down the <Ctrl> key of your computer keyboard and clicking this knob.
The [ST] button is an on/off switch for the signal that is sent from the INPUT CH to
the STEREO bus.
The [M(C)] button is an on/off switch for the signal that is sent from the INPUT CH to
the MONO bus.
If LCR MODE is selected in the Selected Channel window, the [LCR] button will appear
instead of the [ST] button and [M(C)] button, and the [LCR] button will be an on/off
switch for the signal that is sent from the INPUT CH to the LCR bus.
L SEL (Select)
Selects the INPUT CH for which you want to perform operations. This is linked with
the INPUT section [SEL] keys on the M7CLs panel.
M CUE
This button cue-monitors the signal of the INPUT CH. This is linked with the INPUT
section [CUE] keys on the M7CLs panel.
N ON
Switches the INPUT CH on/off. This is linked with the INPUT section [ON] keys on
the M7CLs panel.
O Fader
Adjusts the input level of the INPUT CH. When the M7CL itself is in other than SENDS
ON FADER mode, this is linked with the INPUT section faders of the M7CLs panel.
The current fader value is shown in the numerical box located immediately below the
fader.
You can set this to the minimum value (– dB) by holding down the <Ctrl> key of
your computer keyboard and clicking the fader knob, or set it to the nominal value
(0.00 dB) by holding down the <Ctrl> key and <Shift> key and clicking the fader knob.
The numbers and alpha-
betical letters at the right
of the fader indicate the
DCA group and mute
groups to which that
channel belongs, and
show the Recall Safe and
Mute Safe status of the
channel.
P Channel number
This is the number of the INPUT CH. You can open the Selected Channel window for
this channel by double-clicking this number. If you hold down the <Ctrl> key of your
computer keyboard and double-click this, the Selected Channel window will open as an
additional view.
Q Channel name
This is a text box that displays the channel name. You can also edit the channel name in
this text box.
L
M
N
P
O
Q
K
The numbers of DCA groups to which this
channel belongs are shown in yellow.
The numbers of mute groups to which this
channel belongs are shown in red.
If this channel is set to Recall Safe, the R
character is shown in green.
If this channel is set to Mute Safe, the M char-
acter is shown in green.
M7CL V2 Editor Owner’s Manual
14
ST IN window
In this window you can view and edit the mix parameters of ST IN channels 1–4. The parameters shown in the win-
dow can be selected from the [View] menu or the menu that appears when you right-click in the window.
You can access this window in the following ways.
From the [Windows] menu, choose [Overview] and then choose “ST IN”
Use the navigation keys in the Master window to turn on the [ST IN] button
A INPUT PATCH
Selects the input source that will be assigned to the ST IN channel. The input sources
that can be assigned are the same as for an INPUT CH ( p.11).
B HA GAIN
Drag the knob in the screen to adjust the gain of the internal head amp or of the exter-
nal head amp (AD8HR) patched to the ST IN channel.
C 48V
Switches on/off the phantom power (+48V) of the internal head amp or of the external
head amp (AD8HR) patched to the ST IN channel.
D Ø (Phase)
Inverts the phase of the signal after AD conversion.
E HPF (High Pass Filter)
Switches the high pass filter on/off. You can drag the numeric value up or down to edit
the cutoff frequency.
F EQ (Equalizer)
Switches the EQ on/off (the L/R settings are linked). This is the same as the equalizer for
INPUT CH ( p.12).
6
1
2
5
3
4
M7CL V2 Editor Owner’s Manual
15
G DYN1/DYN2 (Dynamics 1//Dynamics 2)
These buttons switch the two dynamics processors on/off. This is the same as the
dynamics 1/dynamics 2 for INPUT CH ( p.12).
H MIX/MATRIX SEND
Switches between the send indications to MIX buses 1–16 or to MATRIX buses 1–8.
This is the same as the mix/matrix send for INPUT CH ( p.12).
I BALANCE
The BALANCE knob adjusts the balance of the signal that is sent from the ST IN chan-
nel to the STEREO bus L/R channels (or the L/C/R channels). Other than the BAL-
ANCE knob, this is the same as PAN/TO STEREO MONO for an INPUT channel
( p.13).
J SEL (Select)
Selects the ST IN channel for which you want to perform operations. (L and R can be
selected separately.) This is linked with the ST IN section [SEL] keys on the M7CLs
panel.
K CUE
This button cue-monitors the signal of the ST IN channel (L/R are linked). This is
linked with the ST IN section [CUE] keys on the M7CLs panel.
L ON
Switches the ST IN channel on/off (the L/R settings are linked). This is linked with the
ST IN section CH [ON] keys on the M7CLs panel.
M Fader
Adjusts the input level of the ST IN channel. When the M7CL itself is in other than
SENDS ON FADER mode, this is linked with the INPUT section faders of the M7CLs
panel.
The current fader value is shown in the numerical box located immediately below the
fader. This is the same as the fader for INPUT CH ( p.13).
N Channel number
This is the number of the ST IN channel. You can double-click this number to open the
Selected Channel window for this channel. If you hold down the <Ctrl> key of your
computer keyboard and double-click this, the Selected Channel window will open as an
additional view.
O Channel name
This is a text box that displays the channel name. You can also edit the channel name in
this text box.
J
K
L
7
8
9
N
M
O
M7CL V2 Editor Owner’s Manual
16
MIX window
In this window you can view and edit the parameters of MIX channels 1–16. The parameters shown in the window
can be selected from the [View] menu or the menu that appears when you right-click in the window.
You can access this window in the following ways.
From the [Windows] menu, choose [Overview] and then choose “MIX”
Use the navigation keys in the Master window to turn on the [MIX] button
A OUTPUT PATCH
Click here to select the output port that will be assigned to the MIX channel, from the
following choices.
If multiple patches have been made, only the first port is shown.
If you change the patching in this window, the port that had been assigned until then
will be cancelled, and only the newly selected port will be assigned.
B EQ (Equalizer)
Switches the EQ on/off. This is the same as the equalizer for INPUT CH ( p.12).
C DYN1(Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT
CH ( p.12).
D INS (Insert)
Enables/disables the insert-in.
OMNI1–OMNI16 OMNI jacks 1–16
SLOT1-1,
SLOT1-2...SLOT3-16
Input channels of an I/O card installed in slot 1–3
RACK1A,
RACK1B...RACK8R(B)
L/R outputs of Rack 1–8
2TROUT L, 2TROUT R L/R channels of the 2TR OUT DIGITAL jack
4
1
2
3
M7CL V2 Editor Owner’s Manual
17
E MATRIX SEND
These bar graphs indicate the send levels of the signals sent from the
MIX channel to MATRIX 1–8 bus. You can also adjust the send lev-
els by dragging a bar graph to left or right. While you drag the bar
graph, the send level is shown in the numerical display area for TO
STEREO/MONO.
You can set the minimum value (– dB) by holding down the
<Ctrl> key of your computer keyboard and clicking the bar graph,
or set the nominal value (0.00 dB) by holding down the <Ctrl> key
and <Shift> key and clicking the bar graph.
The bar graph display will change as follows according to the send position (pre/post)
and on/off status of the signal sent from the MIX channel to the MATRIX buses.
To switch a send on/off, click the channel number located at the left of the bar graph.
F PAN/BALANCE
The PAN knob adjusts the panning of the signal that is sent from the mix channel to the
STEREO bus L/R channels (or the L/C/R channels). You can set this to the center value
by holding down the <Ctrl> key of your computer keyboard and clicking this knob. If
assigned as a stereo bus, this adjusts the balance of the odd-numbered channel and
even-numbered channel. The stereo bus setting can be made in Mix Bus Setup of the
Mixer Setup screen.
The [ST] button is an on/off switch for the signal that is sent from the mix channel to
the STEREO bus.
The [MONO] button is an on/off switch for the signal that is sent from the mix channel
to the MONO bus.
If LCR MODE is selected in the Selected Channel window, the [LCR] button will
appear instead of the [ST] button and [MONO] button, and the [LCR] button will be
an on/off switch for the signal that is sent from the mix channel to the LCR bus.
G VARI/FIXED
Indicates the type (VARI or FIXED) of the currently selected MIX bus. This parameter
can be switched in Mix Bus Setup of the Mixer Setup screen.
H SEL (Select)
Selects the MIX channel for which you want to make settings.
I CUE
This button cue-monitors the signal of the MIX channel.
J ON
Switches the MIX channel on/off.
K Fader
Adjusts the output level of the
MIX channel. The current fader
value is shown in the numeric box
immediately below the fader. You
can set this to the minimum value
(– dB) by holding down the
<Ctrl> key of your computer key-
board and clicking the fader knob,
or set it to the nominal value
(0.00 dB) by holding down the
<Ctrl> key and <Shift> key and
clicking the fader knob.
The numbers and alphabetical letters at the right of the fader indicate the mute groups
to which that channel belongs, and show the Recall Safe and Mute Safe status of the
channel.
L Channel number
Indicates the number of the MIX channel. You can double-click this number to open
the Selected Channel window for this channel. If you hold down the <Ctrl> key of your
computer keyboard and double-click this, the Selected Channel window will open as an
additional view.
M Channel name
This is a text box that displays the channel name. You can also edit the channel name in
this text box.
6
5
8
9
J
L
M
7
K
• Pre/on (green))
• Pre/off (green)
• Post/on (yellow)
• Post/off (yellow)
The numbers of mute groups to
which this channel belongs are
shown in red.
If this channel is set to Recall Safe,
the R character is shown in green.
If this channel is set to Mute Safe,
the M character is shown in green.
M7CL V2 Editor Owner’s Manual
18
MATRIX window
In this window you can view and edit the parameters of MATRIX channels 1–8. The parameters shown in the win-
dow can be selected from the [View] menu or the menu that appears when you right-click in the window.
You can access this window in the following ways.
From the [Windows] menu, choose [Overview] and then choose “MATRIX”
Use the navigation keys in the Master window to turn on the [MTRX] button
M7CL V2 Editor Owner’s Manual
19
A MIX/CH/ST IN (Send levels from the MIX/INPUT CH/ST IN to
the MATRIX bus)
This switches between indicating the sends from MIX channels 1–16, the sends from
INPUT CH 1–16 / 17–32 / 33–48
(
*
)
, and the sends from ST IN.
The bar graphs located immediately below the button indicate/adjust the level of the
signal that is sent from each channel to the MATRIX bus. The method of operation and
the meaning of the display are the same as for (
5) MATRIX in the MIX window
( p.17).
(
*
)
INPUT CH 33–48 can be viewed only if 48 is selected in the Input Channels field of the Mixer Setup
window when editing offline, or when editing online with the M7CL-48.
B STEREO (Send levels from the STEREO channels to the MATRIX
bus)
Here you can view and edit the send levels of the signals sent from the STEREO chan-
nels to the MATRIX bus. While you drag the bar graph, the send level is shown in the
numerical display area immediately below. The method of operation and the meaning
of the display are the same as for (
5) MATRIX in the MIX window ( p.17).
C EQ (Equalizer)
Switches the EQ on/off. The graph immediately below the button shows the approxi-
mate response of the EQ. This is the same as the equalizer for INPUT CH ( p.12).
D DYN1(Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT
CH ( p.12).
E INS (Insert)
Enables/disables the insert-in.
F SEL (Select)
Selects the MATRIX channel for which you want to make settings.
G CUE
This button cue-monitors the signal of the MATRIX channel.
H ON
This switches the MATRIX channel on/off.
I Fader
This adjusts the output level of the MATRIX channel. The current fader value is shown
in the numeric box immediately below the fader.
The numbers and alphabetical letters at the right of the fader indicate the mute groups
to which that channel belongs, and show the Recall Safe and Mute Safe status of the
channel. (For the significance of the numbers and alphabetical letters, see p.13).
J Channel number
Indicates the number of the MATRIX channel. You can double-click this number to
open the Selected Channel window for this channel. If you hold down the <Ctrl> key of
your computer keyboard and double-click this, the Selected Channel window will open
as an additional view.
4
5
6
7
8
J
3
1
2
9
M7CL V2 Editor Owner’s Manual
20
STEREO/MONO window
In this window you can view and edit the parameters of the STEREO and MONO channels. The parameters shown
in the window can be selected from the [View] menu or the menu that appears when you right-click in the window.
You can access this window in the following ways.
From the [Windows] menu, choose [Overview] and then choose “STEREO/MONO”
Use the navigation keys in the Master window to turn on the [STEREO] button
A EQ (Equalizer)
Switches the EQ on/off (the L/R settings are linked). This is the same as the equalizer for
INPUT CH ( p.12).
B DYN1(Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT
CH ( p.12).
C INS (Insert)
Enables/disables the insert-in. (The L/R settings are linked.)
D MATRIX SEND
Here you can view and edit the send levels of the signals sent from the STEREO/MONO
channel to MATRIX 1–8 bus. The method of operation and the meaning of the display
are the same as for MATRIX in the MIX window ( p.17).
1
3
4
2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73

Yamaha V2 El kitabı

Kategori
Ses dengeleyiciler
Tip
El kitabı
Bu kılavuz için de uygundur