Samsung SMC-213P Kullanım kılavuzu

COLOR MONITOR

SMC-213

SMC-214 U

User Guide

Guide de l'utilisateur

Bedienungsanleitung

Guía del Usuario

Manuale d’uso

êÛÍÓ‚Ó‰ÒÚ‚Ó ÔÓÎ¸ÁÓ‚‡ÚÂÎﬂ

Instrukcja obs∏ugi

E

F

D

ES

I

RU

PL

Kullanıcı El Kitabı

TK

English-2

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles and the point where they exit from the

apparatus.

11. Only use attachment/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket

or table specified by the manufacturer or sold

with the apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen

into the apparatus the apparatus has been exposed to rain or moisture

does not operate normally or has been dropped.

English-3

Graphic Symbol Explanation

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated ‘dangerous voltage’ within the

product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

Warning - To Prevent Fire or Shock Hazard, Do Not

Expose This Monitor To Rain or Moisture.

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

E

English-4

IMPORTANT SAFEGUARDS

Caution

Power source is indicated on the rear of the set. It contains high-voltage parts.

If you remove the cover, it may cause fire or electric shock. Do not remove the

cover by yourself. (Control switches are at the front of the monitor.)

1. Read Instructions : All the safety and operating instructions should be

read before the appliance is operated.

2. Retain Instructions : The safety and operating instructions should be

retained for future reference.

3. Heed Warnings : All warnings on the monitor and in the operating

instructions should be adhered to.

4. Follow Instructions : All operating and user instructions should be

followed.

5. Cleaning : Unplug this monitor from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

Exception. A monitor that is meant for uninterrupted service and that for

some specific reason, such as the possibility of the loss of an authorization

code for a CATV converter is not intended to be unplugged by the user for

cleaning or any other purpose may exclude the reference to unplugging

the monitor in the cleaning description otherwise required in Item 5.

6. Attachments : Do not use attachments not recommended by Samsung

as they may cause hazards.

7. Water and Moisture : Do not use this monitor near water for example,

near a bathtub, wash bowl, kitchen sink or laundry tub in a wet basement

or near a swimming pool and the like wet basement or near a swimming

pool and the like.

English-5

8. Accessories : Do not place this monitor on an unstable cart, stand,

tripod, bracket or table. The monitor may fall, causing serious injury to a

child or adult and serious damage to the appliance. Use only with a cart,

stand, tripod. bracket or table recommended by Samsung or sold with

the monitor. Any mounting of the monitor should follow Samsung’s

instructions and should use a mounting accessory recommended by

Samsung.

9. Ventilation : Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the monitor and to protect

it from overheating and these openings should never be blocked by

placing the monitor on a bed, sofa, rug or other similar surface. This

monitor should never be placed near or over a radiator or heat register.

This monitor should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or Samsung’s

instructions have been adhered to.

10. Power Sources : This monitor should be operated only from the type of

power source indicated on the making label. If you are not sure of the

type of power supply to your installation site, consult your Samsung

dealer or local power company.

11. Grounding or Polarization : For monitors equipped with a 3-wire

grounding-type plug having a third(grounding) pin. This plug will only

fit into a grounding type power outlet. This is a safety feature. If you are

unable to insert the plug into the outlet, contact your electrician to

replace your obsolete outlet. Do not defeat the safety purpose of the

grounding-type plug.

12. Power : Cord Protection-Power supply cords should be routed so that

they are not likely to be walked on or pinched by items placed upon or

against them, paying particular attention to cords at plugs, convenience

receptacles and the point where they exit from the monitor.

E

English-6

13. Lightning : For added protection for this monitor during a lightning

storm or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the cable system. This will

prevent damage to the monitor due to lightning and power-line surges.

14. Overloading : Do not overload wall outlets and extension cords as this

can result in a risk of fire of electric shock.

15. Object and liquid Entry : Never push objects of any kind into this

monitor through openings as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the monitor.

16. Servicing : Do not attempt to service this monitor yourself as opening or

removing cover may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

17. Damage Requiring Service : Unplug this monitor from the wall outlet

and refer servicing to qualified service personnel under the following

conditions.

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled or objects have fallen into the monitor.

c. If the monitor has been exposed to rain or water.

d. If the monitor does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operating instructions as an improper adjustment of other controls

may result in damage and require extensive work by a qualified

technician to restore the monitor to its normal operation.

e. If the monitor has been dropped or the cabinet has been damaged.

18. Replacement Parts : When replacement parts are required, be sure the

service technician has used replacement parts specified by Samsung or

have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric shock or other

hazards.

English-7

19.Safety Check : Upon completion of any service or repairs to this

monitor, ask the service technician to preform safety checks to determine

that the monitor is in proper operating condition.

FCC information

Warning

This equipment has been tested and found to comply the limits for a class A

digital device, pursuant to part 15 of the FCC Rules and ICES-003 of

Industry Canada.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generate, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference

at his own expense.

User-Installer Caution

Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

E

English-8

Information to user

Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference

at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

If necessary, consult your dealer or an experienced radio/television

technician for additional suggestions. You may find the booklet called How

to Identify and Resolve Radio/TV Interference Problems helpful.

This booklet was prepared by the Federal Communications Commission.

It is available from the U.S. Government Printing Office, Washington, DC

20402, Stock Number 004-000-00345-4.

English-9

The party responsible for product compliance:

SAMSUNG ELECTRONICS CO., LTD.

America QA Lab of Samsung

3351 Michelson Drive,

Suite #290, Irvine, CA92612 USA

IC Compliance Notice

This Class (A) digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe (A) respecte toutes les exigences du

Règlement sur le matériel brouilleur du Canada.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numéique de la classe A est conforme à la norme NMB-003 du

Canada.

Warning

This is a class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

CALIFORNIA USA ONLY

This Perchlorate warning applies only to primary CR (Manganese Dioxide)

Lithium coin cells in the product sold or distributed ONLY

in California USA.

“Perchlorate Material - special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

E

English-10

Contents

IMPORTANT SAFETY INSTRUCTIONS.......................English-2

IMPORTANT SAFEGUARD............................................English-4

FCC informatio...................................................................English-7

Front Panel Components and Controls(SMC-213)............English-11

•

Using buttons on the front panel ..................................English-12

Settings Range of Each Button...........................................English-13

Front Panel Components and Controls(SMC-214)............English-15

Strcture of the Setup Menu

............................................English-16

Rear Panel Components and Controls(SMC-213)..............English-17

Rear Panel Components and Controls(SMC-214)..............English-18

Connections.........................................................................English-19

Maintenance........................................................................English-20

Specifications......................................................................English-21

English-11

SMC-213

Front Panel Components and Controls

(SMC-213)

Using buttons on the front panel

Power Switch

On/Off switch. If you press this button, the monitor is turned on and the LED of

selected input signal is lit.

SOURCE(VIDEO Input Selection )Switch

It selects video input signal. To change input signal, press this button.

VOL, DATA Control Switch

VOL key has two functions :

• Vol Control : To change volume, press only this key.

• Data Control : If you press CONTRAST, BRIGHT, COLOR, TINT or

SHARP and then VOL key, you can change the value of

each key.

E

English-12

CONTRAST Switch

This control adjusts the contrast of the screen image. Press CONTRAST

switch and then VOL(DATA) switch to control the contrast.

BRIGHTNESS Switch

This control adjusts the bright of the screen image. Press BRIGHTNESS

switch and then VOL(DATA) switch to control the bright.

COLOR Switch

This control adjusts the color intensity of the screen image. Press COLOR

switch and then VOL(DATA) switch to control the color intensity.

TINT Switch

With this switch, you can control the color to be close to natural color.

For the best result, control screen image with this switch so that skin color is

natural. Press TINT switch then VOL(DATA) switch to control the color.

(Only NTSC)

SHARPNESS Switch

This control adjusts the sharpness of the screen image. Press SHARPNESS

switch and then VOL(DATA) switch to control the sharpness.

LANGUAGE Switch

Press this switch to select language.

You can select the language in following order :

English –Germany – France–Chinese–Spain – Italy

(SMC-213/SMC-214)(depending on the model)

English-13

Settings Range of Each Button

Explanation

To select a specific Contrast within the setting

range.

To select a specific Brightness within the setting

range.

To select a specific Sharpness within the setting

range.

To select a specific Color within the setting range.

To select specific Tint within the setting range.

English-Germany- France-Chinese- Spain

- Italy

Settings Range

0~100

Red 0~100

Green 0~100

6

MENU

Contrast

Brightness

Sharpness

Color

Tint (NTSC)

Language

Adjusting Settings of Menus : Contrast, Brightnesss, Sharpness, Color, and Tint(NTSC),

with VOL button.

• Select each Menu and then press VOL button.

• A bar with which settings of the selected menu can be adjusted will be displayd.

• Pressing VOL button decrease setting of the menu.

• Pressing VOL button increase setting of the menu.

E

English-14

Default setting

50

Green 50, Red 50

English

Preset

Contrast

Brightness

Sharpness

Color

Tint (NTSC)

Language

English-15

Front Panel Components and Controls

(SMC-214)

Using buttons on the front panel

CH1

CH2

CH3

CH4

Power Switch

On/Off switch. If you press this button, the monitor is turned on and the LED of

selected input signal is lit.

VOL, DATA Control Switch

VOL key has two functions :

• Vol Control : To change vol, press only this key.

• Data Control: If you press this key, you can change the value of each key.

AUTO: If you press this key , you can automatically change the channel.

There are four channels on the Frant Panel CH1 CH2 CH3 CH4,

The four channels can connect the Camera.

E

English-16

Structure of the Setup Menu

ADJUST Contrast : 50

Brightness : 50

Sharpness : 50

Colour : 50

Tint : G 50 R 50

Colour Tone : Cool /Cool2 /Normal/Warm1/Warm2

Reset

Return

Ch1 : Sec

Dwell time Ch2 : Sec

Ch3 : Sec

Ch4 : Sec

Return

Ch OSD : On/Off

OSD Setting Auto OSD : On/Off

No Input OSD : On/Off

Return

Digital NR : On/Off

Melody : On/Off

When you press the MENU key , you will enter this choose

If you want to adjust every function in MENU, please press VOL

• Choose the MENU and then press VOL

• If you want to turn down the setting of function of the MENU, please press VOL

• If you want to turn up the setting of function of the MENU, please pressVOL

English-17

Rear Panel Components and Controls

SMC-213

VIDEO A (IN) / VIDEO B (IN)

This is connector for inputting Video signals.

VIDEO A (OUT) / VIDEO B (OUT)

This is connector for outputting Video signal.

AUDIO A (IN) / AUDIO B (IN)

This is connector for inputting audio signal.

AUDIO A (OUT) / AUDIO B (OUT)

This is connector for outputting audio signal.

E

English-18

Rear Panel Components and Controls

AUDIO 1~4

This is connector for inputting AUDIO signal.

AUDIO OUT

This is connector for outputting AUDIO signal.

CAMERA IN 1~4

This is connector for inputtingVIDEO signal.

VIDEO OUT

This is connector for outputting VIDEO signal.

1

234

3

4

SMC-214

English-19

Connections

Camera A

Camera B

SMC-213

1

234

3

4

SMC-214

CAMERA IN 3 CAMERA IN 4

and CAMERA IN 1

CAMERA IN

2 have the same connection

method.

E

English-20

Maintenance

If the quality of the picture on the COLOR MONITOR is poor and cannot be

improved, inspect all system connections and cable runs.

Repairs should be performed by a qualified technician with adequate test equipment

and facilities.

Sayfa yükleniyor ...

Samsung SMC-213P Kullanım kılavuzu

Samsung SMC-213P Kullanım kılavuzu

Diğer Belgeler