Yamaha YDP-103 El kitabı

Marka: Yamaha

Modeli: YDP-103

Tip: El kitabı

YDP

103

Owner’s Manual

Before using the instrument, be sure to read “PRECAUTIONS” on pages 5-7.

For information on assembling the instrument, refer to the instructions at the end of this

manual.

YDP-103 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

• This AC adaptor is designed for use with only Yamaha electronic instruments. Do

not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If some

trouble or malfunction occurs, immediately turn off the power switch of the

instrument and disconnect the AC adaptor from the outlet. When the AC adaptor

is connected to the AC outlet, keep in mind that electricity is flowing at the

minimum level, even if the power switch is turned off. When you are not using

the instrument for a long time, make sure to unplug the power cord from the wall

AC outlet.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the

following:

• Do not place the power cord near heat sources such as heaters or radiators. Also,

do not excessively bend or otherwise damage the cord, or place heavy objects on

it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the specified adaptor (page 25) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as

water seeps into the instrument, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualified

Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item may fall

over and cause a fire.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. Then have the device inspected

by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

For AC adaptor

For YDP-103

Power supply/AC adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

DMI-5 1/2

YDP-103 Owner’s Manual

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Read carefully the attached documentation explaining the assembly process.

Failure to assemble the instrument in the proper sequence might result in

damage to the instrument or even injury.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• When transporting or moving the instrument, always use two or more people.

Attempting to lift the instrument by yourself may damage your back, result in

other injury, or cause damage to the instrument itself.

• Before moving the instrument, remove all connected cables, to prevent damage

to the cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Use only the stand specified for the instrument. When attaching it, use the

provided screws only. Failure to do so could cause damage to the internal

components or result in the instrument falling over.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the

desired listening level.

• Do not insert a finger or hand in any gaps on the key cover or instrument. Also

take care that the key cover does not pinch your finger.

• Never insert or drop paper, metallic, or other objects into the gaps on the key

cover, panel or keyboard. This could cause physical injury to you or others,

damage to the instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

• Do not place the bench in an unstable position where it might accidentally fall

over.

• Do not play carelessly with or stand on the bench. Using it as a tool or stepladder

or for any other purpose might result in accident or injury.

• Only one person should sit on the bench at a time, in order to prevent the

possibility of accident or injury.

• If the bench screws become loose due to extensive long-term use, tighten them

periodically using the included tool.

• Keep special watch over any small children so that they don’t fall off the rear of

the bench. Since the bench does not have a backrest, unsupervised use may

result in accident or injury.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Power supply/AC adaptor

Assembly

Location

Connections

Handling caution

Using the bench (If included)

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-5 2/2

The model number, serial number, power requirements, etc., may be found on

or near the name plate, which is at the bottom of the unit. You should note this

serial number in the space provided below and retain this manual as a perma-

nent record of your purchase to aid identification in the event of theft.

Model No.

Serial No.

(bottom_en_01)

The name plate is located on the bottom of the unit.

YDP-103 Owner’s Manual

NOTICE

To avoid the possibility of malfunction/ damage to the product,

damage to data, or damage to other property, follow the notices

below.

 Handling

• Do not use the instrument in the vicinity of a TV, radio,

stereo equipment, mobile phone, or other electric devices.

Otherwise, the instrument, TV, or radio may generate noise.

When you use the instrument along with an application on

your iPad, iPhone or iPod touch, we recommend that you set

“Airplane Mode” to “ON” on that device in order to avoid

noise caused by communication.

• Do not expose the instrument to excessive dust or

vibrations, or extreme cold or heat (such as in direct

sunlight, near a heater, or in a car during the day) to prevent

the possibility of panel disfiguration, damage to the internal

components or unstable operation. (Verified operating

temperature range: 5° – 40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the panel or keyboard.

 Maintenance

• When cleaning the instrument, use a soft and dry/slightly

damp cloth. Do not use paint thinners, solvents, alcohol,

cleaning fluids, or chemical-impregnated wiping cloths.

• During extreme changes in temperature or humidity,

condensation may occur and water may collect on the

surface of the instrument. If water is left, the wooden parts

may absorb the water and be damaged. Make sure to wipe

any water off immediately with a soft cloth.

 Saving data

• Some types of data (page 21) will be stored in internal

memory, and maintained even if the power is turned off.

However, the data could be lost due to malfunction or

incorrect operation.

Information

 About copyrights

• Copying of the commercially available musical data

including but not limited to MIDI data and/or audio data is

strictly prohibited except for your personal use.

• This product incorporates and bundles contents in which

Yamaha owns copyrights or with respect to which Yamaha

has license to use others' copyrights. Due to copyright laws

and other relevant laws, you are NOT allowed to distribute

media in which these contents are saved or recorded and

remain virtually the same or very similar to those in the

product.

* The contents described above include a computer

program, Accompaniment Style data, MIDI data, WAVE

data, voice recording data, a score, score data, etc.

* You are allowed to distribute medium in which your

performance or music production using these contents is

recorded, and the permission of Yamaha Corporation is

not required in such cases.

 About functions/data bundled with the

instrument

• Some of the preset songs have been edited for length or

arrangement, and may not be exactly the same as the

original.

 About this manual

• The illustrations as shown in this manual are for

instructional purposes only, and may appear somewhat

different from those on your instrument.

• iPhone, iPad and iPod touch are trademarks of Apple Inc.,

registered in the U.S. and other countries.

• The company names and product names in this manual are

the trademarks or registered trademarks of their respective

companies.

 Tu ni ng

• Unlike an acoustic piano, this instrument does not need to

be tuned by an expert (although the pitch can be user-

adjusted to match other instruments). This is because the

pitch of digital instruments is always maintained perfectly.

YDP-103 Owner’s Manual

Table of Contents

PRECAUTIONS .................................... 5

About the Manuals ................................ 9

Included Accessories ............................. 9

Panel Controls and Terminals.............10

Introduction

Setting Up.............................................11

Key Cover ..................................................................11

Music Rest .................................................................11

Turning the Power On.............................................12

Setting the Volume...................................................12

Auto Power Off Function........................................13

Setting the Operation Confirmation Sounds........13

Using Headphones ...................................................13

Reference

Selecting & Playing Voices...................14

Selecting a Voice.......................................................14

Layering Two Voices (Dual) ...................................14

Playing Duo...............................................................15

Adding Variations to the Sound (Reverb) ............15

Setting the Touch Sensitivity ..................................16

Transposing the Pitch in Semitones ......................16

Fine-tuning the Pitch ...............................................16

Using the Pedals........................................................17

Playing Back Songs...............................18

Listening to the Voice Demo Songs.......................18

Listening to the Piano Songs (Preset Songs).........18

Using the Metronome ..........................19

Selecting a Beat .........................................................19

Adjusting the Tempo ...............................................19

Adjusting the Volume of the Metronome.............19

Connecting Other Equipment............. 20

Connecting an iPad or iPhone ............................... 20

Connecting to a computer ......................................20

MIDI Settings ...........................................................20

Data Backup and Initializing .............. 21

Appendix

Troubleshooting ..................................21

Keyboard Stand Assembly...................22

Specifications .......................................25

Index.....................................................26

YDP-103 Owner’s Manual

Thank you for choosing the Yamaha digital piano.

In order to make the most of the performance potential and features of the instrument,

please read the manuals thoroughly, and keep them in a handy place for later reference.

About the Manuals

This instrument has the following manuals.

 Included Manuals

Owner’s Manual (this book)

Explains how to use the instrument.

Quick Operation Guide (separate

sheet)

Shows in chart form the functions assigned to the

buttons and the keyboard for quick

understanding.

 Online Manuals (PDF)

iPhone/iPad Connection Manual

Explains how to connect the instrument to a smart

device, such as iPhone, iPad.

Computer-related Operations

Includes instructions on connecting this

instrument to a computer, and operations related

to transferring song data.

MIDI Reference

Contains the MIDI Data Format and MIDI

Implementation chart, as well as descriptions on

MIDI functions such as MIDI channel and Local

Control settings.

MIDI Basics (only in English, French

and German)

Contains basic explanations about MIDI.

To obtain these materials, access the Yamaha

Downloads website, then enter the model name for

searching the desired files.

Included Accessories

•Owner’s Manual (this book)

• Quick Operation Guide (separate sheet)

• Online Member Product Registration

•Warranty

•AC adaptor

•Bench

*1 You will need the PRODUCT ID on the sheet in order

to fill out the User Registration form.

*2 May not be included depending on your particular

area. Please check with your Yamaha dealer.

Yamaha Downloads

http://download.yamaha.com/

Smart device application

– Digital Piano Controller

With the specially developed Digital Piano

Controller app running on your iPhone, iPad,

or iPod touch, you can remotely control your

digital piano for even more convenience and

flexibility. By presenting various parameters

on-screen, this app allows you to make

settings in a visual, more intuitive manner. For

more details on Digital Piano Controller, refer

to the following Yamaha web site.

http://yamaha.com/kbdapps/

For instructions on connecting the

instrument to a smart-device, refer to the

“iPhone/iPad Connection Manual.”

YDP-103 Owner’s Manual

Panel Controls and Terminals

[ ] (Standby/On) switch......................... page 12

For turning the power on or setting to standby.

[MASTER VOLUME] knob ..................... page 12

For adjusting the volume of the entire sound.

[GRAND PIANO/FUNCTION] button

....................................pages 14, 15, 16, 18, 19, 20

For instantly calling up the Grand Piano 1 Voice.

FUNCTION

You can set various parameters by pressing a note on

the keyboard while holding this button.

[PHONES] jacks....................................... page 13

For connecting a set of standard stereo headphones.

[USB TO HOST] terminal

For connecting to a computer or a smart device such

as iPhone or iPad. Refer to the online manual

“Computer-related Operations” for connection to a

computer. For instructions on using MIDI, refer to

the online manual “MIDI Reference” (page 9).

NOTICE

Use an AB type USB cable of less than 3 meters.

USB 3.0 cables cannot be used.

[TO PEDAL] jack ..................................... page 23

For connecting the pedal cord.

DC IN jack................................................ page 12

For connecting the AC adaptor.

Pedals ....................................................... page 17

For controlling expression and sustain, just as on an

acoustic piano.

Bottom

(Keyboard side)

Bottom

(Keyboard side)

Bottom

(Keyboard side)

YDP-103 Owner’s Manual

Introduction

Setting Up

To open the key cover:

Lift the cover slightly, then push and slide it to the

end.

To close the key cover:

Slide the cover toward you and gently lower the

cover over the keys.

CAUTION

• Hold the cover with both hands when opening or closing it.

Do not release it until it is fully opened or closed. Be care-

ful to avoid catching fingers (yours or others, especially

children’s) between the cover and main unit.

• Do not place objects, such as a piece of metal or paper, on

top of the key cover. Small objects placed on the key cover

may fall inside the unit when the cover is opened and may

be nearly impossible to remove. This could cause electric

shock, short circuit, fire or other serious damage to the

instrument.

To raise the music rest:

1. Pull the music rest up and toward

yourself as far as it will go.

2. Flip down the two metal supports at the

left and right on the rear of the music

rest.

3. Lower the music rest so that it rests on

the metal supports.

To lower the music rest:

1. Pull the music rest toward yourself as far

as it will go.

2. Raise the two metal supports (at the rear

of the music rest).

3. Gently lower the music rest backward

until it is all the way down.

CAUTION

Do not try to use the music rest in a half-raised position.

When lowering the music rest, do not release your hands

from the music rest until it is all the way down.

Key Cover

CAUTION

Be careful to avoid catching

your fingers when opening or

closing the cover.

Music Rest

Setting Up

YDP-103 Owner’s Manual

1. Connect the plugs of the AC adaptor in

the order shown in the illustration.

WARNING

Use the specified adaptor (page 25) only. The use of other

adaptors may result in irreparable damage to both the adaptor

and the instrument.

CAUTION

Remove the AC plug from the AC outlet when the instrument

is not to be used for extended periods of time, or during elec-

trical storms.

NOTE

Follow this procedure in reverse order when disconnecting the

AC adaptor.

For the Power Adaptor with a Removable Plug

Do not remove the plug from the power adaptor. If

the plug is removed accidentally, slide the plug into

place without touching the metallic parts, and then

push the plug in completely until it clicks.

WARNING

• Make sure to keep the plug attached to the AC adaptor.

Using the plug alone can cause electric shock or fire.

• Never touch the metallic section when attaching the plug.

To avoid electric shock, short circuit or damage, also be

careful that there is no dust between the AC adaptor and

plug.

2. Press the [ ](Standby/On) switch to

turn the power on.

Power indicator

If you close the key cover without turning the

power to standby, the power indicator remains lit,

indicating that the power is still on.

When you’re ready to turn the power to standby,

press the [ ] (Standby/On) switch again for a sec-

ond. The power indicator turns off.

CAUTION

Even when the [ ] (Standby/On) switch is in the standby sta-

tus, electricity is still flowing to the instrument at a minimum

level. When not using the instrument for an extended period

of time, be sure to unplug the power cord from the wall AC

outlet.

When you start playing, use the [MASTER VOL-

UME] knob to adjust the volume of the entire key-

board sound.

CAUTION

Do not use this instrument at a high volume level for a long

period of time, to avoid damaging your hearing.

Turning the Power On

AC outlet

AC adaptor

DC IN jack (page 10)

DC plug

The shape of the plug and outlet differ depending on the

locale.

Plug

Slide the plug

as indicated

The shape of the plug and outlet differ depending on the locale.

Setting the Volume

Power indicator

[ ] (Standby/On) switch

Level decreases Level increases

Setting Up

YDP-103 Owner’s Manual

To prevent unnecessary power consumption, this

function automatically turns the power off if no

buttons or keys are operated for approximately 30

minutes. If desired, you can disable or enable this

function.

To disable the Auto Power Off function:

When the instrument is turned off:

While holding down the lowest key (A-1), press the

[ ] (Standby/On) switch to turn on the power so that

the power indicator flashes three times, after which the

Auto Power Off function is disabled.

When the instrument is turned on:

While holding down [GRAND PIANO/FUNCTION],

press the lowest key (A-1).

To enable the Auto Power Off function:

While holding down [GRAND PIANO/FUNC-

TION], press the A♯-1 key.

Because of the simple, piano-like design of this

instrument, there are a minimum of panel controls,

and most settings are made using the keys of the

keyboard. When you turn a function on or off, or

change a setting, the instrument produces a sound

to confirm the change. For a list of the functions

assigned to the buttons and keys, see the included

“Quick Operation Guide.”

Setting the Operation Confirmation

Sounds On or Off

When a setup is changed using a button and key

combination, an operation sound (“On,” “Off,”

click, tempo value input) is sounded. This confir-

mation sound can be enabled (ON) or disabled

(OFF) as desired.

Turning the Operation C onfirm ati on Sounds on

Press the C7 key while holding down [GRAND PIANO/

FUNCTION].

Turning the Operation C onfirm ati on Sounds off

Press the C7 key while holding down [GRAND PIANO/

FUNCTION].

Default setting: on

Since this instrument is equipped with two

[PHONES] jacks, you can connect two sets of stan-

dard stereo headphones. If you are using only one

set of headphones, insert a plug into either jack.

Inserting headphones automatically turns off the

speakers.

CAUTION

Do not use headphones at a high volume for an extended

period of time; doing so may cause hearing loss.

Auto Power Off Function

Setting the Operation

Confirmation Sounds

A-1

A#-1

Using Headphones

PHONES

Bottom surface

Standard stereo phone plug

YDP-103 Owner’s Manual

Reference

Selecting & Playing Voices

To select the Grand Piano Voice:

Simply press [GRAND PIANO/FUNCTION] to

instantly call up the Grand Piano 1 Voice — no matter

what other Voice is called up or other settings are

made.

To select another Voice:

While holding [GRAND PIANO/FUNCTION], press

one of the C0 – A0 keys.

Voice List

After selecting the desired Voice, play the

keyboard.

NOTE

To familiarize yourself with the characteristics of the Voices, listen

to the Demo Songs for each Voice (page 18).

You can play Voices simultaneously across the entire

range of the keyboard.

1 Engage Dual.

While holding down [GRAND PIANO/FUNC-

TION], simultaneously press any two desired keys

from C0 –A0.

The Voice assigned to the left side key is Voice 1,

while the Voice assigned to the right side key is Voice

2 To exit from Dual, simply press [GRAND

PIANO/FUNCTION].

To shift the Octave for each Voice:

While holding down [GRAND PIANO/FUNCTION],

press one of the F5 – A#5 keys.

To adjust the Balance between two

Voic es:

This operation adjusts the level of Voice 1, relative to

Voice 2. While holding down [GRAND PIANO/

FUNCTION], press the B5 key to decrease by one,

C#6 to increase by one, or C6 to set to 0 (equal bal-

ance). The setting range is from -6 to +6. Settings

above “0” increase the volume of Voice 1, and vice

versa.

Selecting a Voice

Key

Voice

Name

Description

GRAND

PIANO 1

Recorded samples from a full concert grand

piano. Perfect for classical compositions as

well as any other style that requires acoustic

piano.

C#0

GRAND

PIANO 2

Bright piano sound. Clear tone helps the

sound to “cut through” when playing in an

ensemble.

D0 E. PIANO 1

Vintage electric piano sound of hammer-

struck metallic “tines.” Soft tone when played

lightly, and an aggressive tone when played

hard.

D#0 E. PIANO 2

An electronic piano sound created by FM

synthesis. Good for standard popular music.

PIPE

ORGAN 1

A typical pipe organ sound (8 feet + 4 feet +

2 feet). Good for sacred music from the

Baroque period.

PIPE

ORGAN 2

This is the organ’s full coupler sound, often

associated with Bach’s “Toccata and Fugue.”

F#0STRINGS

Spacious and large-scale string ensemble.

Try combining this Voice with piano in DUAL.

HARPSI-

CHORD 1

The definitive instrument for baroque music.

Authentic harpsichord sound, with plucked

strings, no touch response.

G#0

HARPSI-

CHORD 2

Mixes the same Voice an octave higher for a

more brilliant, dynamic tone.

VIBRA-

PHONE

Played with relatively soft mallets.

A0С0

Layering Two Voices (Dual)

Voice 1

F5 -1

Voice 2

G#5-1

F#50 A5 0

G5 +1 A#5+1

A0С0

Voice 2Voice 1

F5 A#5

C6 (0)B5 (-1)

C#6 (+1)

Selecting & Playing Voices

YDP-103 Owner’s Manual

This function allows two different players to play the

instrument, one on the left and the other on the right,

over the same octave range.

1 While holding down [GRAND PIANO/

FUNCTION], press the B-1 key to engage

Duo.

The keyboard is divided into the two sections with

the E3 key as the Split Point.

NOTE

2 One person can play the left section of the

keyboard while the other plays the right.

Sounds played with the left voice are played from the

left speaker, and sounds played with the right voice

are played from the right speaker.

3 To exit from Duo, press the B-1 key while

holding [GRAND PIANO/FUNCTION]

again.

To shift the Octave for each Voice:

Same as in Dual (page 14).

Pedal function in Duo

Damper Pedal: Applies Sustain to the right section.

Sostenuto Pedal: Applies Sustain to both sections.

Soft Pedal: Applies Sustain to the left section.

This instrument features several Reverb Types that

add extra depth and expression to the sound to create

a realistic acoustic ambience. Although the appropri-

ate Reverb Type is called up automatically when you

select each of the Voices, you can change the Reverb

Type as desired.

To select a Reverb Type:

While holding down [GRAND PIANO/FUNCTION],

press one of the C5 – E5 keys.

Reverb Type List

NOTE

In Dual, the Reverb Type for Voice 1 is called up by default. If

“OFF” is assigned to Voice 1, the Reverb Type for the Voice 2 is

called up.

To adjust Reverb Depth:

While holding down [GRAND PIANO/FUNCTION],

press the A4 key to decrease by one, B4 to increase by

one, or A#4 to reset to the default value (most suitable

value for the current Voice). The higher the value, the

deeper the effect.

Default setting: the setting best suited for the current

Voice

Setting range: 0 (no effect) – 10 (maximum depth)

Playing Duo

• The Split Point cannot be changed from E3.

• If the keyboard is in Dual mode, engaging Duo will exit from

Dual, and Voice 1 is used over the entire range of the

keyboard.

• Changing the Voice will exit from Duo.

B-1

Split Point (E3)

Left Voice (Voice 2) Right Voice (Voice 1)

Equivalent to C3

(Center)

Equivalent to C3

(Center)

Adding Variations to the Sound

(Reverb)

Key

Reverb

Type

Description

C5 Room

Adds a continuous reverb effect to the

sound, similar to the acoustic reverbera-

tion you would hear in a room.

C#5 Hall1

For a bigger reverb sound. This effect

simulates the natural reverberation of a

small-size concert hall.

D5 Hall2

For a truly spacious reverb sound. This

effect simulates the natural reverberation

of a large concert hall.

D#5 Stage

Simulates the reverb of a stage environ-

ment.

E5 Off No effect is applied.

E5C5

(+1)

(-1)

A#4 (Default)

Selecting & Playing Voices

YDP-103 Owner’s Manual

You can specify the Touch Sensitivity (how the sound

responds to your playing strength).

While holding down [GRAND PIANO/FUNCTION],

each press of the G4 key switches the Touch Sensitiv-

ity setting in sequence: Fixed, Soft, Medium and

Hard. Also, when Operation Confirmation Sounds is

set to “On,” the number corresponding to the setting

of the Touch Sensitivity is spoken.

Touch Sensitivity

NOTE

The Touch Sensitivity settings may have little or no effect with the

PIPE ORGAN and HARPSICHORD Voices, since these

instruments are not normally responsive to keyboard dynamics.

You can shift the pitch of the entire keyboard up or

down in semitone in order to facilitate playing in dif-

ficult key signatures, or to easily match the pitch of

the keyboard to the range of a singer or other instru-

ments. For example, if “+5” is selected, playing key C

produces pitch F, letting you play a song of F major as

though it were in C major.

Setting range: -6 – 0 – +6

To transpose the pitch down:

While holding down [GRAND PIANO/FUNCTION],

press the F6 key to decrease by 1 semitone.

To transpose the pitch up:

While holding down [GRAND PIANO/FUNCTION],

press the G6 key to increase by 1 semitone.

To restore the original pitch:

While holding down [GRAND PIANO/FUNCTION],

press the F#6 key.

You can fine tune the pitch of the entire instrument in

approximately 0.2 Hz increments. This lets you accu-

rately match the keyboard pitch to that of other

instruments or CD music.

Setting range: 414.8 – 440.0 – 466.8 Hz

To lower the pitch:

While holding down [GRAND PIANO/FUNCTION],

press the G#6 key repeatedly to lower the pitch in

approximately 0.2 Hz increments.

To raise the pitch:

While holding down [GRAND PIANO/FUNCTION],

press the A6 key repeatedly to raise the pitch in

approximately 0.2 Hz increments.

To set the pitch to A3 = 442 Hz:

While holding down [GRAND PIANO/FUNCTION],

press the A#6 key.

To reset the pitch to the default (A3 =

440 Hz):

While holding down [GRAND PIANO/FUNCTION],

press the B6 key.

Setting the Touch Sensitivity

Voice

Confir-

mation

Touch

Sensitivity

Description

0Fixed

The volume level does not change at all

regardless of whether you play the key-

board soft or hard.

1Soft

The volume level does not change

much when you play the keyboard soft

or hard.

2 Medium

This is the standard piano touch

response (default setting).

3Hard

The volume level changes very widely

from pianissimo to fortissimo to facili-

tate dynamic and dramatic expression.

You have to hit the keys hard to pro-

duce a loud sound.

Transposing the Pitch in Semitones

Fine-tuning the Pitch

G6 (+1)F6 (-1)

F#6 (Original pitch)

B6 (440.0 Hz)A6 (+0.2 Hz)

A#6 (442.0 Hz)G#6 (-0.2 Hz)

Selecting & Playing Voices

YDP-103 Owner’s Manual

Damper Pedal (Right)

Pressing this pedal will sustain notes longer.

Releasing this pedal immediately stops (damps)

any sustained notes. This pedal also features a

“half-pedal” function that creates partial sustain

effects, depending on how far down you press the

pedal.

NOTE

If the damper pedal doesn’t work, make sure that the pedal cord

is properly plugged into the main unit (page 23).

Half-pedal function

This function allows you to vary the sustain length depending on

how far the pedal is pressed. The farther down you press the

pedal, the more the sound sustains. For example, if you press the

damper pedal and all notes you are playing sound a bit murky

and loud with too much sustain, you can release the pedal half

way or higher to decrease the sustain (murkiness).

Sostenuto Pedal (Center)

Pressing this pedal while holding the notes will

sustain the pressed notes (as if the Damper Pedal

had been pressed), but all subsequently played

notes will not be sustained. This makes it possible

to sustain a chord or single low note, for example,

while the other notes are played “staccato.”

NOTE

While the sostenuto pedal is held, the organ and strings Voices

sound continuously without decay after the notes have been

released.

Soft Pedal (Left)

Pressing this pedal will reduce the volume and

slightly change the timbre of the notes. The notes

played before this pedal is pressed are not affected.

Using the Pedals

When you press the damper pedal here,

this note and the notes you play before you

release the pedal sustain longer.

When you press the sostenuto pedal here

while holding the note, the note will sustain as

long as you hold the pedal.

YDP-103 Owner’s Manual

Playing Back Songs

Demo Songs are provided for each of the Voices such

as Piano and Organ.

1 While holding down [GRAND PIANO/

FUNCTION], press one of the C1 – A1

keys to start playback.

This operation starts playback of the Demo Song of

the Voice assigned to the pressed key. Starting with

the selected Song, playback will continue in

sequence.

NOTE

Demo Song List

The demonstration pieces listed above are short rearranged

excerpts of the original compositions. All other songs are original

2 Press [GRAND PIANO/FUNCTION]

again to stop playback.

To adjust the playback tempo:

The operation is same as that of the Metronome

Tempo (page 19).

In addition to the Demo Songs, a variety of Preset

Songs are provided for your listening pleasure.

1 While holding down [GRAND PIANO/

FUNCTION], press one of the C2 – A2

keys to start playback.

Starting with the selected Song, playback will con-

tinue in sequence.

Preset Song List

2 Press [GRAND PIANO/FUNCTION]

again to stop playback.

To adjust the playback tempo:

The operation is same as that of Metronome Tempo

(page 19).

Listening to the Voice Demo Songs

The keyboard Voice is automatically set to correspond to that

of the current Demo Song. If you select another Voice during

playback, the Demo Song will automatically change to that

corresponding to the selected new Voice.

Key Voice Name Title Composer

GRAND PIANO 1

Blumenlied G.Lange

C#1

GRAND PIANO 2

Original Original

D1 E. PIANO 1 Original Original

D#1 E. PIANO 2 Original Original

E1 PIPE ORGAN 1 Original Original

F1 PIPE ORGAN 2 Original Original

F#1 STRINGS Original Original

HARPSICHORD 1

Gavotte J.S. Bach

G#1

HARPSICHORD 2

Invention No. 1 J.S. Bach

A1 VIBRAPHONE Original Original

A1C1

Listening to the Piano Songs

(Preset Songs)

Key No. Title Composer

C2 1

Menuett G dur

BWV.Anh.114

J.S. Bach

C#2 2 Turkish March W.A. Mozart

D2 3 Für Elise L.v. Beethoven

D#2 4 Valse op.64-1 “Petit chien” F.F. Chopin

E2 5 Träumerei R. Schumann

F2 6

Dolly’s Dreaming and

Awakening

T. O e s te n

F#2 7 Arabesque J.F. Burgmüller

G2 8 Humoresque A. Dvořák

G#2 9 The Entertainer S. Joplin

A2 10 La Fille aux Cheveux de Lin C.A. Debussy

A2C2

YDP-103 Owner’s Manual

Using the Metronome

The metronome is convenient for practicing with an accurate tempo.

1 While holding down [GRAND PIANO/

FUNCTION], press the C3 key to start

the Metronome.

2 Execute the same operation again to stop

the Metronome.

NOTE

While holding down [GRAND PIANO/FUNCTION],

press the C#4 key to decrease the value, or the D4 key

to increase the value. The default value is “no beat.”

When a value other than “no beat” is selected, the first

beat is accented with a bell sound.

While holding down [GRAND PIANO/FUNCTION],

press the D3 – B3 keys (to which numbers 0 – 9 are

assigned individually) to specify the three-digit value

as a Tempo of the Metronome and Song. To specify

“95,” for example, press the B3 (0), A#3 (9) and F#3

(5) keys in order while holding down [GRAND

PIANO/FUNCTION].

Default setting (Metronome): 120

Setting range: 32 – 280

To restore the default value:

While holding down [GRAND PIANO/FUNCTION],

press the C4 key.

Voice confirmation of current Tempo

value (in English)

While holding down [GRAND PIANO/FUNCTION],

press the C#3 key.

While holding down [GRAND PIANO/FUNCTION],

press the D#4 key to decrease the volume of the Met-

ronome, the F4 key to increase the volume, or the E4

to restore the default volume (10).

Setting range: 1 – 20

Pressing only [GRAND PIANO/FUNCTION] also stops the

Metronome, but it also resets to the Grand Piano Voice.

Selecting a Beat

C#4

Adjusting the Tempo

Adjusting the Volume of the

Metronome

D3 B3

C#3

D#4

YDP-103 Owner’s Manual

Connecting Other Equipment

CAUTION

Before connecting the instrument to other electronic components, turn off the power to all the components. Before turning the

power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components

may result.

With an iPad or iPhone connected to your digital

piano, you can use a wide range of apps to expand the

functionality of your instrument in exciting new ways.

For details on how to connect the devices, refer to the

“iPhone/iPad Connection Manual” (page 9), which

you can download for free from the Yamaha web site.

By connecting a computer to the [USB TO HOST]

terminal, you can take advantage of various music

software with your computer and the instrument.

For details on using a computer with this instrument,

refer to the “Computer-related Operations” on the

website.

NOTE

Use an AB type USB cable. When connecting a USB cable, make

sure that the length is less than 3 meters.

Setting the MIDI Transmit Channels

In any MIDI control setup, the MIDI channels of the

transmitting and receiving devices must be matched

for proper data transfer. You can specify the channel

on which this instrument transmits MIDI data. To do

this, while holding down [GRAND PIANO/FUNC-

TION], press one of the D6 – E6 keys. The D6 key

decreases the value by 1, the E6 key increases the

value by 1, and the D#6 key restores the default value

(channel 1).

Setting range: 1 – 16

Default value: 1

NOTE

• In Dual, the keyboard performance via Voice 1 is transmitted on

the specified MIDI Transmit Channel and the keyboard

performance via Voice 2 is transmitted on the next channel

number in sequence (specified channel + 1).

• No MIDI messages are output during playback of the Demo

Song or Preset Song.

Other MIDI Settings

The MIDI settings other than the Transmit Channel

are set as listed below, and cannot be changed.

• MIDI Receive Channels: ........... All channels (1 – 16)

• Local Control:............................................................On

• Program Change Transmit/Receive:.......................Yes

• Control Change Transmit/Receive:.........................Yes

Connecting an iPad or iPhone

Connecting to a computer

[USB TO HOST]

terminal

Instrument

USB cable

Computer

MIDI Settings

E6 (+1)D6 (-1)

D#6 (Default)

Sayfa yükleniyor...

Yamaha YDP-103 El kitabı

Marka: Yamaha

Modeli: YDP-103

Tip: El kitabı

PDF''yi indir

rapor

diğer dillerde

español: Yamaha YDP-103 El manual del propietario
français: Yamaha YDP-103 Le manuel du propriétaire
italiano: Yamaha YDP-103 Manuale del proprietario
svenska: Yamaha YDP-103 Bruksanvisning
čeština: Yamaha YDP-103 Návod k obsluze
polski: Yamaha YDP-103 Instrukcja obsługi
Deutsch: Yamaha YDP-103 Bedienungsanleitung
português: Yamaha YDP-103 Manual do proprietário
English: Yamaha YDP-103 Owner's manual
dansk: Yamaha YDP-103 Brugervejledning
русский: Yamaha YDP-103 Инструкция по применению
suomi: Yamaha YDP-103 Omistajan opas
Nederlands: Yamaha YDP-103 de handleiding
română: Yamaha YDP-103 Manualul proprietarului

Yamaha YDP-103 El kitabı

Yamaha YDP-103 El kitabı

diğer dillerde

İlgili makaleler