LG 42CS460 El kitabı

Please read this manual carefully before operating

your set and retain it for future reference.

www.lg.com

OWNER’S MANUAL

LED LCD TV / LCD TV

LS35**

LS34**

CS46**

P/NO : MFL67409504(1208-REV06)

Printed in Korea

A-2

TABLE OF CONTENTS

COMMON

LANGUAGE

TABLE OF CONTENTS

A-3 SETTING UP THE TV

A-3 Attaching the stand

A-6 Tidying cables

A-7 Not using the Desk-Type Stand

LANGUAGE LIST

English

Turkish

B-1 MAKING CONNECTIONS

B-1 Antenna connection

B-1 Satellite dish connection

B-2 Adapter connection

B-2 HDMI connection

B-3 Component connection

B-4 Composite connection

B-5 USB connection

B-5 CI module connection

B-6 Euro Scart connection

B-8 SPECIFICATIONS

A-3

SETTING UP THE TV

19/22/26LS35**

Model 19/22LS35** 26LS35**

Standard screw P4 x 16

M4 x 14

Number of screw 2EA 2EA

32LS35**

SETTING UP THE TV

Attaching the stand

Image shown may differ from your TV.

1

2

3

M4 x 14

4EA

Stand Body

Stand Base

P4 x 16

4EA

1

3

2

Stand Body

Stand Base

A-4

SETTING UP THE TV

Stand Body

Stand Base

M4 x 20

4EA

M4 x 20

4EA

Stand Body

Stand Base

1

3

26CS46**

2

M4 x 20

4EA

32/42CS46**, 32/42LS340*

1

3

2

M4 x 20

4EA

A-5

SETTING UP THE TV

P4 x 16

2EA

1

3

2

M4 x 20

4EA

P4 x 16

4EA

1

3

2

M4 x 14

4EA

32LS345*

42LS345*

Stand Body

Stand Base

Stand Body

Stand Base

A-6

SETTING UP THE TV

Tidying cables

Gather and bind the cables with the cable holder.

(Only 19LS35**)

Cable Holder

(Only 22/26LS35**)

Cable Holder

(Only 32LS35**, 32/42LS345*)

Cable Holder

CAUTION

y

Do not move the TV by holding the cable

holder, as the cable holders may break, and

injuries and damage to the TV may occur.

CAUTION

y

When attaching the stand to the TV

set, place the screen facing down on a

cushioned table or flat surface to protect the

screen from scratches.

y

Make sure that the screws are inserted

correctly and fastened securely. (If they are

not fastened securely enough, the TV may

tilt forward after being installed.)

Do not use too much force and over tighten

the screws; otherwise screw may be

damaged and not tighten correctly.

NOTE

y

Remove the stand before installing the TV

on a wall mount by performing the stand

attachment in reverse.

A-7

SETTING UP THE TV

(Only 26/32/42CS46**, 32/42LS340*)

1 Gather and bind the cables with the cable

management.

2 Fix the cable management rmly to the TV.

Cable Management

CAUTION

y

Do not move the TV by holding the cable

management, as the cable management may

break, and injuries and damage to the TV may

occur.

Not using the Desk-Type

Stand

(Only 26/32/42CS46**, 32/42LS340*, 32LS345*)

• When installing the wall mounting bracket,

use the Protection cover. This will protect the

opening from accumulating dust and dirt.

Push the supplied protection cover into the

opening at the bottom of the TV until it locks in

place.

Protection cover

NOTE

(Only 32LS345*)

y

When removing Protection Cover from

bottom of TV insert your fingers into hole of

cover hold firmly and pull upwards towards

you to remove.

Protection cover

Please read this manual carefully before operating

your set and retain it for future reference.

www.lg.com

OWNER’S MANUAL

LED LCD TV / LCD TV

2

ENG

ENGLISH

TABLE OF CONTENTS

WARNING

y

If you ignore the warning message, you

may be seriously injured or there is a

possibility of accident or death.

CAUTION

y

If you ignore the caution message, you may

be slightly injured or the product may be

damaged.

NOTE

y

The note helps you understand and use

the product safely. Please read the note

carefully before using the product.

TABLE OF CONTENTS

3 LICENSES

3 OPEN SOURCE SOFTWARE NOTICE

4 SAFETY INSTRUCTIONS

10 INSTALLATION PROCEDURE

10 ASSEMBLING AND PREPARING

10 Unpacking

15 Parts and buttons

16 Lifting and moving the TV

17 Mounting on a table

19 Mounting on a wall

20 REMOTE CONTROL

21 USING THE USER GUIDE

22 MAINTENANCE

22 Cleaning your TV

22 - Screen, frame, cabinet and stand

22 - Power cord

22 TROUBLESHOOTING

3

ENGENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation. This is an ofcial DivX Certied® device that plays

DivX video. Visit divx.com for more information and software tools to convert your

les into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered

in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your

registration code, locate the DivX VOD section in your device setup menu. Go to vod.

divx.com for more information on how to complete your registration.

“DivX Certied® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or

its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274”

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this

product, please visit http://opensource.lge.com .

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of

performing such distribution (such as the cost of media, shipping and handling) upon email request to

[email protected]. This offer is valid for three (3) years from the date on which you purchased the

product.

4

ENG

ENGLISH

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

y

Do not place the TV and remote control in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that produce heat

- Near kitchen counters or humidifiers where they can easily be exposed to steam

or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

y

Do not place the product where it might be exposed to dust.

This may cause a fire hazard.

y

Mains plug is the disconnecting device. The plug must remain readily operable.

y

Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or

covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

y

Make sure to connect the power cable to the grounded current. (Except for devices

which are not grounded.)

You may be electrocuted or injured.

y

Fix the power cable completely.

If the power cable is not fixed completely, a fire can break out.

y

Ensure the power cord does not come into contact with hot objects such as a

heater.

This may cause a fire or an electric shock hazard.

y

Do not place a heavy object, or the product itself, on power cables.

Otherwise, this may result in fire or electric shock.

y

Bend antenna cable between inside and outside building to prevent rain from

flowing in.

This may cause water damaged inside the Product and could give an electric

shock.

y

When mounting a TV it on the wall, make sure not to install TV by hanging power

and signal cables on the back of the TV.

It may cause fire, electric shock.

5

ENGENGLISH

SAFETY INSTRUCTIONS

y

Do not plug too many electrical devices into a single multiple electrical outlet.

Otherwise, this may result in fire due to over-heating.

y

Do not drop the product or let it fall over when connecting external devices.

Otherwise, this may result in injury or damage to the product.

Desiccant

y

Keep the packing anti-moisture material or vinyl packing out of the reach of

children.

Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the

patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause

suffocation. Keep it out of the reach of children.

y

Do not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

y

Dispose of used batteries carefully to protect a child from eating them.

Please seek Doctor- Medical Attention immediately if child consumes batteries.

y

Do not insert any metal objects/conductors (like a metal chopstick/cutlery/

screwdriver) between power cable plug and input Wall Socket while it is connected

to the input terminal on the wall. Additionally, do not touch the power cable right

after plugging into the wall input terminal.

You may be electrocuted.

(Depending on model)

y

Do not put or store inflammable substances near the product.

There is a danger of combustion/explosion or fire due to careless handling of the

inflammable substances.

y

Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the

product, or inflammable objects such as paper and matches. Children must pay

particular attention.

Electrical shock, fire or injury can occur. If a foreign object is dropped into the

product, unplug the power cord and contact the service centre.

y

Do not spray water on the product or scrub with an inflammable substance (thinner

or benzene). Fire or electric shock accident can occur.

y

Do not allow a impact shock or any objects to fall into the product, and do not drop

onto the screen with something.

You may be injured or the product can be damaged.

y

Never touch this product or antenna during a thunder or lighting storm.

You may be electrocuted.

y

Never touch the wall outlet when there is leakage of gas, open the windows and

ventilate.

It may cause a fire or a burn by a spark.

6

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not disassemble, repair or modify the product at your own discretion.

Fire or electric shock accident can occur.

Contact the service center for check, calibration or repair.

y

If any of the following occur, unplug the product immediately and contact your local

service centre.

- The product has been impacted by shock

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange smell

This may result in fire or electric shock.

y

If you don’t intend to use the product for a long time, unplug the power cable from

the product.

Covering dust can cause a fire, or insulation deterioration can cause electric

leakage, electric shock or fire.

y

Apparatus shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

7

ENGENGLISH

SAFETY INSTRUCTIONS

CAUTION

y

Install the product where no radio wave occurs.

y

There should be enough distance between an outside antenna and power lines to

keep the former from touching the latter even when the antenna falls.

This may cause an electric shock.

y

Do not install the product on places such as unstable shelves or inclined surfaces.

Also avoid places where there is vibration or where the product cannot be fully

supported.

Otherwise, the product may fall or flip over, which may cause injury or damage to

the product.

y

If you install the TV on a stand, you need to take actions to prevent the product

from overturning. Otherwise, the product may fall over, which may cause injury.

y

If you intend to mount the product to a wall, attach VESA standard mounting interface (optional

parts) to the back of the product. When you install the set to use the wall mounting bracket (optional

parts), fix it carefully so as not to drop.

y

Only use the attachments / accessories specified by the manufacturer.

y

When installing the antenna, consult a qualified service man.

This may create a fire hazard or an electric shock hazard.

y

We recommend that you maintain a distance of at least 2 to 7 times the diagonal

screen size when watching TV.

If you watch TV for a long period of time, this may cause blurred vision.

y

Only use the specified type of battery.

This could cause damage to the remote control.

y

Do not mix new batteries with old batteries.

This may cause the batteries to overheat and leak.

y

Make sure there are no objects between the remote control and its sensor.

y

Signal from the remote control may be disturbed by sun light or other strong light.

In this case, darken the room.

y

When connecting external devices such as video game consoles, make sure the

connecting cables are long enough.

Otherwise, the product may fall over, which may cause injury or damage the

product.

8

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not turn the product On/Off by plugging-in or unplugging the power plug to the

wall outlet. (Do not use the power plug for switch.)

It may cause mechanical failure or could give an electric shock.

y

Please follow the installation instructions below to prevent the product from

overheating.

- The distance between the product and the wall should be more than 10 cm.

- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in

a cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

y

Take care not to touch the ventilation openings when watching the TV for long

periods as the ventilation openings may become hot. This does not affect the

operation or performance of the product.

y

Periodically examine the cord of your appliance, and if its appearance indicates damage or

deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact

replacement part by an authorized servicer.

y

Prevent dust collecting on the power plug pins or outlet.

This may cause a fire hazard.

y

Protect the power cord from physical or mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,

wall outlets, and the point where the cord exits the appliance.

y

Do not press strongly upon the panel with a hand or sharp object such as nail,

pencil or pen, or make a scratch on it.

y

Avoid touching the screen or holding your finger(s) against it for long periods of

time. Doing so may produce some temporary distortion effects on the screen.

y

When cleaning the product and its components, unplug the power first and wipe it

with a soft cloth. Applying excessive force may cause scratches or discolouration.

Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or

industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the

product and its panel.

Otherwise, this may result in fire, electric shock or product damage (deformation,

corrosion or breakage).

y

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power

source even if you turn off this unit by SWITCH.

y

When unplugging the cable, grab the plug and unplug it.

If the wires inside the power cable are disconnected, this may cause fire.

y

When moving the product, make sure you turn the power off first. Then, unplug the

power cables, antenna cables and all connecting cables.

The TV set or power cord may be damaged, which may create a fire hazard or

cause electric shock.

9

ENGENGLISH

SAFETY INSTRUCTIONS

y

When moving or unpacking the product, work in pairs because the product is

heavy.

Otherwise, this may result in injury.

y

Contact the service center once a year to clean the internal parts of the product.

Accumulated dust can cause mechanical failure.

y

Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

y

If the product feels cold to the touch, there may be a small “flicker” when it is turned

on. This is normal, there is nothing wrong with product.

y

The panel is a high technology display product with resolution of two million to six

million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue

or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and

does not affect the performance and reliability of the product.

This phenomenon also occurs in third-party products and is not subject to

exchange or refund.

y

You may find different brightness and color of the panel depending on your viewing

position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is not related with

the product performance, and it is not malfunction.

y

Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video

game) for a prolonged time may cause damage to the screen, resulting in retention of the image,

which is known as image sticking. The warranty does not cover the product for image sticking.

Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours

for LCD, 1 or more hours for Plasma).

Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of

the panel.

This phenomenon also occurs in third-party products and is not subject to exchange or refund.

y

Generated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by

plastic thermal contraction due to tempera-ture and humidity. This noise is common for products

where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is

generated from a high-speed switching circuit, which supplies a large amount of current to operate a

product. It varies depend-ing on the product.

This generated sound does not affect the performance and reliability of the product.

10

ENG

ENGLISH

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

y

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

y

The available menus and options may differ from the input source or product model that you are

using.

y

New features may be added to this TV in the future.

y

The TV can be placed in standby mode in order to reduce the power consumption. And the TV should

be turned off if it will not be watched for some time, as this will reduce energy consumption.

y

The energy consumed during use can be significantly reduced if the level of brightness of the picture

is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and item.

CAUTION

y

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

y

Some models have a thin film attached on to the screen and this must not be removed.

NOTE

y

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to upgrade

of product functions.

y

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick

and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory

stick does not fit into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

11

ENGENGLISH

ASSEMBLING AND PREPARING

Remote control and

batteries (AAA)

(See p. 20)

Owner’s manual

Cable holder

(Depending on model)

(See p. A-6)

Polishing cloth

(Depending on model)

Use this to remove dust

from the cabinet.

Adapter

(Only 19/22/26LS35**)

(See p. B-2)

Stand Screw

2EA, P4 x 16

(Only 19/22LS35**)

(See p. A-3)

Stand Screw

2EA, M4 x 14

(Only 26LS35**)

(See p. A-3)

Stand Screw

4EA, P4 x 16

4EA, M4 x 14

(Only 32LS35**, 42LS345*)

(See p. A-3, A-5)

Stand Screw

8EA, M4 x 20

(Only 26/32/42CS46**,

32/42LS340*)

(See p. A-4)

Stand Screw

2EA, P4 x 16

4EA, M4 x 20

(Only 32LS345*)

(See p. A-5)

Desk-mount screw

(Only 32LS35**,

26/32/42CS46**,

32/42LS34**)

(See p. 17)

Power Cord

Protection cover

(Only 26CS46**)

(See p. A-7)

Protection cover

(Only 32CS46**,

32LS340*)

(See p. A-7)

Protection cover

(Only 42CS46**,

42LS340*)

(See p. A-7)

Protection cover

(Only 32LS345*)

(See p. A-7)

or

Isolator

(Depending on model)

(See p. 13)

12

ENG

ENGLISH

ASSEMBLING AND PREPARING

Stand Body / Stand Base

(Only 19/22/26LS35**)

(See p. A-3)

Stand Body / Stand Base

(Only 32LS35**)

(See p. A-3)

Stand Body / Stand Base

(Only 26CS46**)

(See p. A-4)

Stand Body / Stand Base

(Only 32/42CS46**, 32/42LS340*)

(See p. A-4)

Stand Body / Stand Base

(Only 32LS345*)

(See p. A-5)

Stand Body / Stand Base

(Only 42LS345*)

(See p. A-5)

Sayfa yükleniyor...

LG 42CS460 El kitabı

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

LG 42CS460 El kitabı

diğer dillerde

İlgili makaleler