- 8 -
IMPORTANT SAFETY REMARKS
7. Do not allow the cord to dangle from table or counter edges. Do not allow the cord to
come in contact with hot surfaces.
8. Do not touch the hot surfaces of the coffee machine - only use the handle on the body.
9. Exercise caution when carrying the coffee machine containing hot water. To lift the
appliance, always use the handle on the body.
10. To avoid electric shocks, the electrical base or the cord shall not be submerged in
water.
11. Use the coffee machine only with the provided base. Do not use the base unit for
other purposes.
12. To avoid fire hazard, do not operate the appliance near explosive and/or flammable
gases.
13. Do not use the coffee machine for any purpose other than heating water.
14. This appliance is not designed for any other purpose that is specified in this manual.
CAUTION: Do not operate the coffee machine without any water in it.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
INSTRUCTIONS FOR USE
1. Before the first operation, fill the coffee machine to the maximum level with fresh
water and boil it. Remove the water and repeat.
2. The coffee machine shall always be unplugged when filling water.
3. To avoid spillage hazard, do not overfill the appliance. The water level indicator will
assist you in measuring the correct amount.
4. Fill the coffee machine with cold water up to the maximum water level.
5. Place the appliance on the electrical base and start it by pressing turn on/off button.
6. Meanwhile use a stirrer to stir the coffee.
7. As the coffee boils and foam start to foam, turn off the device and pour a portion of
the coffee foam in the cups.
8. Place the appliance on the power base once again and turn it on; when the coffee boils
once again, fill the cups.
9. You can adjust the amount of coffee based on your preference.
10. The appliance is equipped with a circuit breaker safety system to prevent empty
operation. When the appliance is not filled with sufficient amount of water or attempted
to operate empty, the circuit breaker safety system will shut the appliance automatically.
If this is the case, wait for the heater element to cool down for a few minutes, then fill
the appliance and use as intended.
11. Place the power base on a dry and level surface. Place the coffee machine on the
power base. The coffee machine will fit on the power base and the power connection will
be established.
12. Plug the cable to a grounded outlet and operate the device by switching the button
‘I’ (ON)”.
13. After the coffee machine is left for cooling for 15 to 20 seconds, the appliance may