Yamaha DDP-2 El kitabı

Yamaha
Marka
Yamaha
Modeli
DDP-2
Kategori
Işlemciler
Tip
El kitabı

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

POWER
TV/DBS DVD/LD
DIGITAL
DIGITAL
ENHANCED
SET MENU PARAMETER
MOVIE THEATER
TEST
NATURAL SOUND DIGITAL PROCESSOR DDP–2
CINEMA DSP
Natural Sound Digital Processor
Processeur numérique “Son Naturel”
OWNER’S MANUAL
MODE D’EMPLOI
1 Read Instructions – All the safety
and operating instructions should be read
before the unit is operated.
2 Retain Instructions – The safety and
operating instructions should be retained
for future reference.
3 Heed Warnings – All warnings on the
unit and in the operating instructions
should be adhered to.
4 Follow Instructions – All operating
and other instructions should be followed.
5 Water and Moisture – The unit
should not be used near water – for
example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
6 Carts and Stands – The unit should
be used only with a cart or stand that is
recommended by the manufacturer.
6A A unit and cart
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the unit and cart combination to overturn.
7 Wall or Ceiling Mounting – The unit
should be mounted to a wall or ceiling
only as recommended by the
manufacturer.
8 Ventilation – The unit should be
situated so that its location or position
does not interfere with its proper
ventilation. For example, the unit should
not be situated on a bed, sofa, rug, or
similar surface, that may block the
ventilation openings; or placed in a built-
in installation, such as a bookcase or
cabinet that may impede the flow of air
through the ventilation openings.
9 Heat – The unit should be situated
away from heat sources such as
radiators, stoves, or other appliances that
produce heat.
10 Power Sources – The unit should be
connected to a power supply only of the
type described in the operating
instructions or as marked on the unit.
11 Power-Cord Protection – Power-
supply cords should be routed so that
they are not likely to be walked on or
pinched by items placed upon or against
them, paying particular attention to cords
at plugs, convenience receptacles, and
the point where they exit from the unit.
12 Cleaning – The unit should be
cleaned only as recommended by the
manufacturer.
13 Nonuse Periods – The power cord of
the unit should be unplugged from the
outlet when left unused for a long period
of time.
14 Object and Liquid Entry – Care
should be taken so that objects do not fall
into and liquids are not spilled into the
inside of the unit.
15 Damage Requiring Service – The
unit should be serviced by qualified
service personnel when:
A. The power-supply cord or the plug
has been damaged;
or
B. Objects have fallen, or liquid has
been spilled into the unit;
or
C. The unit has been exposed to rain;
or
D. The unit does not appear to operate
normally or exhibits a marked change in
performance;
or
E. The unit has been dropped, or the
cabinet damaged.
16 Servicing – The user should not
attempt to service the unit beyond those
means described in the operating
instructions. All other servicing should be
referred to qualified service personnel.
17 Power Lines – An outdoor antenna
should be located away from power lines.
18 Grounding or Polarization –
Precautions should be taken so that the
grounding or polarization is not defeated.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER-SERVICEABLE
PARTS INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
•
Explanation of Graphical Symbols
CAUTION
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
SAFETY INSTRUCTIONS
English
We Want You Listening For A Lifetime
(for US customers only)
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group
want you to get the most out of your equipment by playing it at a safe
level. One that lets the sound come through loud and clear without
annoying blaring or distortion – and, most importantly, without affecting
your sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, YAMAHA and the Electronic
Industries Association’s Consumer Electronics Group recommend you
to avoid prolonged exposure from excessive volume levels.
FCC INFORMATION
(for US customers only)
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this
manual, meets FCC requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT : When connecting this product to accessories and/or another
product use only high quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation instructions. Failure to follow
instructions could void your FCC authorization to use this product in the USA.
3. NOTE : This product has been tested and found to comply with the
requirements listed in FCC Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a reasonable level of assurance
that your use of this product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not installed and used
according to the instructions found in the users manual, may cause
interference harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that interference will not
occur in all installations. If this product is found to be the source of
interference, which can be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the
interference.
Utilize power outlets that are on different branch (circuit breaker or fuse)
circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the
antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type
cable.
If these corrective measures do not produce satisfactory results, please
contact the local retailer authorized to distribute this type of product. If you can
not locate the appropriate retailer, please contact Yamaha Electronics Corp.,
U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620.
The above statements apply ONLY to those products distributed by Yamaha
Corporation of America or its subsidiaries.
SPECIAL NOTES FOR FCC COMPOSITE DEVICE (for US
customers only)
This device is a composite system. The digital device component may not cause
harmful interference.
Congratulations!
You are the proud owner of a Yamaha Digital Processor—an extremely sophisticated audio
component. This unit takes full advantage of Yamaha’s undisputed leadership in the field of digital
audio processing to bring you a whole new world of listening experiences. Follow the instructions
in this manual carefully when setting up your system, and this unit will sonically transform your
room into a newest Dolby Stereo Digital theater. With this unit, you will get incredible realism from
Dolby Digital (AC-3) encoded video sources.
Rather than tell you about the wonders of this unit, however, let’s get right down to the business
of setting up the system and trying out its many capabilities. Please read this operation manual
carefully and store it in a safe place for later reference.
1
English
1. AVOID EXCESSIVE HEAT, HUMIDITY, DUST
AND VIBRATION
Keep the unit away from locations where it is likely to be
exposed to high temperatures or humidity—such as
near radiators, stoves, etc. Also avoid locations which
are subject to excessive dust accumulation or vibration
which could cause mechanical damage.
2. INSTALL THE UNIT IN WELL-VENTILATED
CONDITION
Install the unit in well-ventilated condition. Otherwise it
may not only damage the unit, but also cause fire.
3. KEEP THE AC POWER PLUG
DISCONNECTED DURING VACATION ETC.
When not planning to use this unit for long periods of
time (ie., vacation, etc.), disconnect the AC power
plug from the wall outlet.
4. AVOID PHYSICAL SHOCKS
Strong physical shocks to the unit can cause damage.
Handle it with care.
5. DO NOT OPEN THE UNIT OR ATTEMPT
REPAIRS OR MODIFICATIONS YOURSELF
This product contains no user-serviceable parts. Refer
all maintenance to qualified Yamaha service personnel.
Opening the unit and/or tampering with the internal
circuitry will make servicing difficult and will endanger
you and your unit.
6. MAKE SURE POWER IS OFF BEFORE
MAKING OR REMOVING CONNECTIONS
Always turn power OFF prior to connecting or
disconnecting cables. This is important to prevent
damage to the unit itself as well as other connected
equipment.
7. HANDLE CABLES CAREFULLY
Always plug and unplug cables—including the AC
cord—by gripping the connector, not the cord.
8. CLEAN WITH A SOFT DRY CLOTH
Never use solvents such as benzine or thinner to clean
the unit. Wipe clean with a soft, dry cloth.
9. USE THIS UNIT WITH THE CORRECT
VOLTAGE
The voltage to be used must be the same as that
specified on this unit. Using this unit with a higher
voltage than that which is specified is dangerous and
may result in a fire or other type of accident causing
damage. YAMAHA will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
10.KEEP AWAY FROM TUNERS
Digital signals generated by the unit may interfere with
other equipment such as tuners, receivers or TVs. Move
the system farther away from such equipment if
interference is observed.
IMPORTANT!
Please record the model and serial number of your
unit in the space below.
Model:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
WARNING
To reduce the risk of fire or electric shock, do not
expose this unit to rain or moisture.
Voltage Selector (General Model only)
The voltage selector on the rear panel of this unit
must be set for your local mains voltage
BEFORE plugging into the AC mains supply.
Voltages are 110/120/220/240 AC, 50/60 Hz.
CAUTION (FOR CANADA MODEL)
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT AND FULLY
INSERT.
FOR CANADIAN CUSTOMER
THIS CLASS B DIGITAL APPARATUS MEETS ALL
REQUIREMENTS OF THE CANADIAN INTERFERENCE-
CAUSING EQUIPMENT REGULATIONS.
The apparatus is not disconnected from the AC
power source as long as it is connected to the wall
outlet, even if the apparatus itself is turned off.
PRECAUTIONS
2
SAFETY INSTRUCTIONS...........................................Inside the cover
PRECAUTIONS ...................................................................................1
FEATURES ..........................................................................................3
CONTROLS & THEIR FUNCTIONS...................................................6
FRONT PANEL..................................................................................6
DISPLAY PANEL...............................................................................7
SPEAKER SETUP...............................................................................8
CONNECTIONS.................................................................................11
SELECTING THE OUTPUT MODES SUITABLE FOR YOUR
SPEAKER SYSTEM .......................................................................14
OUTPUT BALANCE ADJUSTMENT ...............................................17
ADJUSTMENTS IN THE “SET MENU”MODE................................19
OPERATIONS....................................................................................22
SELECTING SOUND FIELD PROGRAMS......................................23
DESCRIPTIONS OF THE SOUND FIELD PROGRAMS..............24
TROUBLESHOOTING ......................................................................25
SPECIFICATIONS .............................................................................26
CONTENTS
3
English
This unit is a sophisticated digital sound processor designed
specifically for decoding the Dolby Digital (AC-3).
This unit consists of a Dolby Digital (AC-3) Decoder, Yamaha
Digital Sound Field Processor and other original Yamaha functions
developed using the newest technology to reproduce sources
encoded with the Dolby Digital (AC-3) precisely as movie sound
creators intended.This unit will lead listeners into a totally new
sound experience.
This unit is equipped with “6-channel discrete” output terminals
for sending multi-channel audio signals of the Dolby Digital (AC-3)
individually.Therefore, the audio amplifier or receiver must have
“discrete” input terminals to receive the signals from this unit.
If your amplifier or receiver can input 5-channel discrete signals
only, see page 12.
Digital Sound Field Processing
This unit incorporates a sophisticated digital sound field
processor.The processor allows you to electronically expand and
change the shape of the audio sound field from audio and video
sources, creating a theater-like experience in your listening room.
Dolby Digital (AC-3)
The built-in Dolby Digital (AC-3) Decoder leads you into a
totally new sound experiences.
Dolby Digital (AC-3) is a new generation of multi-channel digital
audio technology, or the newest spatial sound processing format
developed for 35 mm film-movies by employing a new kind of low
bit-rate audio coding.
Dolby Digital (AC-3) is a digital surround sound system that
provides completely independent multi-channel audio to
consumers.In multi-channel form, Dolby Digital (AC-3) provides
five full range channels in what is sometimes referred to as a “3/2”
configuration: three front channels (left, center and right), plus two
surround channels.A sixth bass-only effect channel is also
provided for output of LFE (low frequency effect), or low bass
effects that are independent of other channels.This channel is
counted as 0.1, thus giving rise to the term 5.1 channels in total.
Compared to Dolby Pro Logic that is referred to a “3/1” system
(left front, center, right front and just one surround channel), Dolby
Digital (AC-3) features two surround channels, called stereo or
split surrounds, each offering the same full range fidelity as the
three front channels.
Sound of wide dynamic range reproduced by the five full range
channels presents listeners much excitement that has never been
experienced before.Precise sound orientation by the discrete
digital sound processing expands realism that the original movie
possesses.
FEATURES
4
Laser Disc is a home audio format that could benefit from
Dolby Digital (AC-3). In the near future, Dolby Digital (AC-3) will
also be applied to DBS, CATV, DVD and HDTV.The ongoing
release of Dolby Stereo Digital theatrical films now underway will
provide an immediate source of Dolby Digital (AC-3) encoded
video software.
Manufactured under license from Dolby Laboratories Licensing
Corporation.“Dolby”, “AC-3”, “Pro Logic”, and the double-D symbol
are trademarks of Dolby Laboratories Licensing Corporation.
Copyright 1992 Dolby Laboratories, Inc. All rights reserved.
The following original functions make the surround-sound effect
of Dolby Digital (AC-3) become the most suitable for your audio
system and the listening conditions.
● Dynamic range (sound scale) of source can be changed so
that it will be suitable for the listening conditions.
● Output of low bass from any channel can be assigned to
either the MAIN output terminals or SUBWOOFER output
terminal to maximize system performance.
● Output of LFE can be assigned to either the MAIN output
terminals or SUBWOOFER output terminal to maximize
system performance.
Dolby Digital (AC-3) + DSP (CINEMA DSP)
Dolby Digital (AC-3) shows its full ability in a large movie
theater, because movie sounds are originally designed to be
reproduced in a large movie theater using many speakers.It is
difficult to create a sound environment similar to that of a movie
theater in your listening room, because the room size, materials of
inside walls, the number of speakers, etc. of your listening room is
much different from those of a movie theater.
Yamaha DSP technology made it possible to present you with
nearly the same sound experience as that of a large movie theater
in your listening room by compensating for lack of presence and
dynamics in your listening room with its original digital sound fields
combined with Dolby Digital (AC-3) decoded sound field.
The YAMAHA “CINEMA DSP” logo indicates those programs
are created by the combination of Dolby Surround and YAMAHA
DSP technology.
CINEMA DSP
5
English
Dolby Digital (AC-3) + 2 Digital Sound Fields
Digital sound fields are created on the independent left and
right surround sides of the Dolby Digital (AC-3) decoded sound
field respectively.They create a wide acoustic environment and
emphasize surround-effect in the room, letting you feel much
presence as if you are watching a movie in a popular Dolby Stereo
Digital theater.
This combination is available on the sound field program
“ DIGITAL ENHANCED”.
Dolby Digital (AC-3) + 3 Digital Sound Fields
Digital sound fields are created on the presence side and the
independent left and right surround sides of the Dolby Digital (AC-
3) decoded sound field respectively.They create a wide acoustic
environment and much surround effect in the room without losing
high channel separation.With wide dynamic range of Dolby Digital
(AC-3) sound, this sound field combination lets you feel as if you
are watching a movie in the newest Dolby Stereo Digital theater.
This will be the most ideal home theater sound at the present time.
This combination is available on the sound field program
“DIGITAL MOVIE THEATER”.
6
FRONT PANEL
CONTROLS & THEIR FUNCTIONS
NATURAL SOUND DIGITAL PROCESSOR DDP–2
POWER
CINEMA DSP
dB
ms
DSP
PRO LOGIC
DIGITAL
TV/DBS DVD/LD
PCM AC 3
DIGITAL
DIGITAL
ENHANCED
SET MENU PARAMETER
MOVIE THEATER
TEST
TV/DBS DVD/LD
12345
67 8
1 POWER Switch
Turns this unit on and off.
2 Display Panel
See page 7.
3 Remote Control Sensor
Receives signals from the remote control unit provided for a
Yamaha receiver or amplifier.This sensor receives only signals
of switching the input source from TV/DBS to DVD/LD, and vice
versa, so only the remote control unit which has the functions
of selecting the TV/DBS and DVD/LD input sources is available.
7
English
4 Sound Field Program Selector Buttons
Select the program “ DIGITAL”, “ DIGITAL ENHANCED” or
“DIGITAL MOVIE THEATER” by pressing the corresponding
button.The name of selected program lights up on the display.
5 TEST Switch
Used when you make the output balance adjustment to
maximize the performance of your audio/video system
including this unit. (For details, refer to page 17–18.)
6 SET MENU and Buttons.
Select functions in the SET MENU mode.
7 PARAMETER – and + Buttons
Make a setting change or an adjustment for the selected
function in the SET MENU mode.
These buttons are also used for increasing and decreasing
levels in the output balance adjustment using the test tone.
8 Input Selector Buttons (TV/DBS, DVD/LD)
Select the source which you want to listen to.
When the TV/DBS is selected, the source connected to the
TV/DBS input jack(s) of this unit is selected, and when the
DVD/LD is selected, the source connected to the DVD/LD input
jack(s) of this unit is selected.
The currently selected input source is shown on the display
panel (as “TV/DBS” or “DVD/LD”).
DISPLAY PANEL
1 Input Source Indicators (TV/DBS, DVD/LD)
Shows the currently selected input source.
2 DIGITAL and DSP Indicators
“ DIGITAL” lights up when the built-in Dolby Digital (AC-3)
Decoder is on, and “DSP” lights up when the built-in digital
sound field processor is on.When both the Dolby Digital (AC-3)
Decoder and the digital sound field processor are on, both
indicators light up.
3 Multi-informatiom Display
Shows the currently selected program, or information for
several adjustments or setting changes made on this unit.
dB
ms
DSP
DIGITAL
TV/DBS DVD/LD
12
3
8
Setting Up Your Speaker System
This unit has been designed to provide the best sound field
quality with a five-speaker system setup, using one pair of main
speakers for main and front effect sound reproduction, one pair of
surround speakers for rear effect and surround sounds and one
center speaker for dialog.We therefore recommend that you use a
five-speaker setup. A four-speaker system excluding a center
speaker will still provide impressive ambience and effects,
however, and may be a good way to begin with this unit.You can
always upgrade to the five-speaker system later.
Use of the Center Dialog Speaker Is Recommended
When playing back a source with the Dolby Digital (AC-3)
decoded, dialog etc. are output from the center channel.Therefore,
if you want to maximize the performance of your Audio/Video
home theater system, it is recommended that you use a center
channel speaker.
If for some reason it is not practical to use a center speaker, it
is possible to enjoy movie viewing without it.Best results, however,
are obtained with the full system.
Use of a Subwoofer Expands Your Sound Field
The use of a subwoofer is effective not only for reinforcing bass
frequencies from any or all channels, but also for reproducing the
LFE (low frequency effect) sound with high fidelity when playing
back a source with the Dolby Digital (AC-3) decoded.You may wish
to choose the convenience of a Yamaha Active Servo Processing
Subwoofer System, which has its own built-in power amplifier.
SPEAKER SETUP
9
English
Speaker System Configurations
Main L Main RCenter
Surround L Surround R
Main L Main R
Surround L Surround R
Five-speaker system A simple system without a center speaker
Set the center channel mode (1. CENTER SPEAKER) to
the NRML or WIDE position. (See page 14.)
Set the center channel mode (1. CENTER SPEAKER) to
the PHNTM position. (See page 14.)
10
Speakers and Speaker Placement
Your five-speaker system will require two speaker pairs: the
MAIN SPEAKERS (your normal stereo speakers) and the
SURROUND SPEAKERS, plus the CENTER SPEAKER.You may
also be using a SUBWOOFER.
The MAIN SPEAKERS should be high performance models
and have enough power handling capacity to accept the maximum
output of your audio system.
Other speakers do not have to be equal to the MAIN
SPEAKERS.For precise sound localization, however, it is ideal to
use high performance models that can reproduce sounds in full
range for the CENTER SPEAKER and the SURROUND
SPEAKERS.
Place the MAIN SPEAKERS in the normal position.
Place the SURROUND SPEAKERS behind your listening
position.They should be nearly six feet up from the floor.
Place the CENTER SPEAKER precisely between the two MAIN
SPEAKERS.(To avoid interference, keep the speaker above or
below the television monitor, or use a magnetically shielded
speaker.)
If using a SUBWOOFER, such as a Yamaha Active Servo
Subwoofer System, the position of the speaker is not so critical
because low bass tones are not highly directional.
Main speaker
Surround speaker
Center speaker
Subwoofer
11
English
UNSWITCHED
I00W MAX.
AC OUTLET
DIGITAL INPUT
COAXIAL
DVD/LD
OPTICAL COAXIAL
TV/DBS
OPTICAL
6CH DISCRETE OUTPUT
MAIN CENTER SURROUND
SUB
WOOFER
l6
20
28
40
60
l2
8
4
2
0
–dB
6CH DISCRETE INPUT
DVD/LD TV/DBS
SURROUND
CENTERMAIN
SUB
WOOFER
COAXIAL
DIGITAL
OUT
COAXIAL
DIGITAL
OUT
OPTICAL
DIGITAL
OUT
OPTICAL
DIGITAL
OUT
Before you start making connections make sure all related electronic components are turned OFF.
Also, refer to the owner’s manual for each component to be connected to this unit.
CONNECTIONS
(Europe Model)
To AC outlet
LD (DVD) player
*
2
*
1
*
2
*
1
AC OUTLET (UNSWITCHED)
The power cord of any audio/video unit can be
connected to this outlet.
The power to this outlet is not controlled by this unit’s
POWER switch. This outlet will supply power to the
connected unit even if this unit is turned off.
The maximum power that can be connected to this
outlet is 100 watts.
TV/Satellite tuner
Amplifier or Receiver
*
1
:
Optical fiber cable (Not included)
*
2
:
Connection cord (Not included)
12
CONNECTING TO THE AMPLIFIER OR RECEIVER
For connections with the amplifier or receiver, use the included
connection cords.
Make sure that you have the left (L) and right (R) channels
correctly connected.That means that jacks marked “L” on this unit
must be connected to jacks marked “L” on the other unit. Likewise
with the “R” jacks.This is easy if you remember to always use the
red plug for the “R” jacks and the white plug for the “L” jacks.
Use an amplifier or receiver equipped with discrete audio signal
input jacks.
Connect the 6CH DISCRETE OUTPUT jacks of this unit to the
discrete audio input jacks of the amplifier or receiver so that each
channel output is correctly connected to the corresponding input,
that is “MAIN” to “MAIN”, “CENTER” to “CENTER”, “SURROUND”
to “SURROUND” and “SUBWOOFER” to “SUBWOOFER”.
If you use an amplifier or receiver (the Yamaha model
RX-V2090 etc.) which has only 5-channel discrete input jacks
without a SUBWOOFER input jack, no connection can be made
from the SUBWOOFER output jack of this unit to the amplifier (or
receiver).
In this case, select the MAIN position on the function “4.
LFE/BASS OUT”. (See page 15.)
CONNECTING WITH AN LD (DVD) PLAYER,
TV/SATELLITE TUNER, ETC.
Connect an LD player, DVD player, TV/Satellite tuner etc. which
outputs digital audio signals encoded with the Dolby Digital (AC-3)
to this unit.Two audio/video units can be connected to this unit.
Connect an audio/video unit (LD player, DVD player, etc.) to the
DVD/LD COAXIAL or OPTICAL digital signal input jack of this unit.
In the same way, connect another unit (TV/Satellite tuner, etc.) to
the TV/DBS COAXIAL or OPTICAL digital signal input jack of this
unit.
To make a connection between optical digital audio signal
jacks, remove the cover from each jack, and then connect them by
using a commercially available optical fiber cable that conforms to
EIAJ standards.Other cables might not function correctly.
Even if you connect an audio/video unit to the OPTICAL (or
COAXIAL) jack of this unit, you must keep the unit connected with
analog audio signal input jacks of the amplifier (or receiver),
because the 6 channel discrete signals cannot be recorded by a
tape deck or VCR connected to the amplifier (or receiver).
NOTE: Be sure to attach the covers when the OPTICAL jacks are
not being used, in order to protect the jacks from dust.
NOTE: All digital audio signal input jacks are applicable to the
sampling frequency of 32 kHz, 44.1 kHz and 48 kHz.
13
English
Notes on connecting with an LD player equipped
with an AC-3 RF output
If your LD player has AC-3 RF signal output jack and no digital
signal output jack for AC-3 discrete audio signals, connect the AC-
3 RF signal output jack to this unit’s OPTICAL (or COAXIAL) digital
signal input jack by using an RF demodulator (separate purchase).
First, connect the AC-3 RF signal output jack of the LD player to
the AC-3 RF signal input jack of the RF demodulator. Next,
connect the optical (or coaxial) digital signal output jack of the RF
demodulator to the OPTICAL (or COAXIAL) digital signal input jack
of this unit.
This connection is necessary for inputting audio signals encoded
with the Dolby Digital (AC-3) on the LD player to this unit.
If you have a DVD player as well, it can be connected to this
unit’s DVD/LD COAXIAL digital signal input jack.In this case, if you
play sources encoded with the Dolby Digital (AC-3) on both LD
player and DVD player, the signals from the LD player are input to
this unit (because signals input to the OPTICAL jack take priority
of signals input to the COAXIAL jack).
It is also necessary to connect the LD player (and/or DVD
player) to analog audio signal input jacks of the amplifier or
receiver regardless of the AC-3 RF signal connection, for playing
back a source with the Dolby Pro Logic Surround decoded or in
normal stereo (or monaural).
*
1
:
If PCM signals (digital signals not encoded with the Dolby Digital (AC-
3)) are input to this unit, they cannot be output from the 6CH
DISCRETE OUTPUT jacks of this unit.
*
2
:
If you want to input the signals from the DVD player to the DVD/LD
COAXIAL input jack of this unit surely, it is recommended to switch off
the RF demodulator. However, if your RF demodulator is the Yamaha
model APD-1, you do not have to switch it off.
DIGITAL INPUT
COAXIAL
DVD/LD
OPTICAL COAXIAL
TV/DBS
OPTICAL
PCM
DIGITAL
(AC-3)
OUT
OPTICAL
DIGITAL OUT
AC-3
RF OUT
AC-3
RF IN
RF demodulator
(Yamaha APD-1 etc.)
DVD player LD player
*
1
*
2
14
SELECTING THE OUTPUT MODES SUITABLE FOR YOUR SPEAKER SYSTEM
This unit provides you the following four functions to determine the method of distributing output signals to speakers suitable for your audio
system.When speaker connections are all completed, select a proper position on each function to make the best use of your speaker
system.
1. CENTER SPEAKER
2. REAR SPEAKER
3. MAIN SPEAKER
4. LFE/BASS OUT
1. CENTER SPEAKER (CNTR SP)
Choices: NRML/WIDE/PHNTM
Preset position: NRML
NRML (Normal):
Select this position when you use a center speaker that is
smaller than the main speakers. In this position, low bass
signals (below 90 Hz) at the center channel are output
from the MAIN output jacks (or the SUBWOOFER output
jack if the SMALL position is selected on “3. MAIN
SPEAKER” and the SWFR position is selected on “4.
LFE/BASS OUT”).
WIDE: Select this position when your center speaker is
approximately the same size as the main speakers.
PHNTM (Phantom):
Select this position when you do not have a center
speaker.The center channel sound will be output from the
left and right main speakers.
2. REAR SPEAKER (REAR SP)
Choices: SMALL/LARGE
Preset position: SMALL
SMALL:
Select this position if your rear surround speakers do not
have a high ability for bass reproduction.
In this position, low bass signals (below 90 Hz) at the rear
surround channels are output from the SUBWOOFER
output jacks (or the MAIN output jacks if the MAIN position
is selected on “4. LFE/BASS OUT”).
LARGE:
Select this position if your rear surround speakers have a
high ability for bass reproduction, or a subwoofer is
connected to the rear surround speaker in parallel.
In this position, full range signals are output from the
SURROUND output jacks.
DESCRIPTION OF EACH FUNCTION
15
English
3. MAIN SPEAKER (MAIN SP)
Choices: SMALL/LARGE
Preset position: LARGE
SMALL:
Select this position if your main speakers do not have a
high ability for bass reproduction. However, if your system
does not include a subwoofer, do not select this position.
In this position, low bass signals (below 90 Hz) at the main
channels are output from the SUBWOOFER output jack (if
the SWFR or BOTH position is selected on “4. LFE/BASS
OUT”).
LARGE:
Select this position if your main speakers have a high
ability for bass reproduction.
In this position, full range signals present at the main
channels are output from the MAIN output jacks.
4. LFE/BASS OUT (LFE/BASS)
Choices: MAIN/SWFR/BOTH
Preset position: SWFR
MAIN: Select this position if your system does not include a
subwoofer.
In this position, full range signals present at the main
channels, signals from the LFE channel and other low
bass signals that are selected on “1. CENTER SPEAKER”
to “3. MAIN SPEAKER” to be distributed from other
channels are output from the MAIN output jacks.
SWFR/BOTH:
Select either the SWFR or BOTH position if your system
includes a subwoofer.
In either position, signals at LFE channel and other low
bass signals that are selected on “1. CENTER SPEAKER”
to “3. MAIN SPEAKER” to be distributed from other
channels are output from the SUBWOOFER output jack.
When the LARGE position is selected on “3. MAIN
SPEAKER”, in the SWFR position, no signal is distributed
from the main channels to the SUBWOOFER output jack,
however in the BOTH position, low bass signals from the
main channels are output to both of the MAIN and the
SUBWOOFER output jack.
16
METHOD OF CHANGING SELECTIONS
Operations should be made watching information on this unit’s
display panel.
1. Turn the power of this unit on.
2. Press “ ” or “ ” once or more until the title of function on
which you will change the selection appears on the display.
3. Press “+” or “–” once or more so that the desired position is
selected.
4. Repeat step 2 and 3 to change selections on other functions in
the same way.
POWER
SET MENU
T DVD/LD
P
PARAMETER
T DVD/LD
P
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31

Yamaha DDP-2 El kitabı

Yamaha
Marka
Yamaha
Modeli
DDP-2
Kategori
Işlemciler
Tip
El kitabı
Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:
PDF''yi indir
rapor

diğer dillerde

İlgili makaleler