Yamaha PSR-80 El kitabı

Setting UpReferenceAppendix Quick Guide

EN

Owner’s Manual

DIGITAL KEYBOARD

Owner’s Manual

2

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter).

DO NOT connect this product to any power supply or adapter other

than one described in the manual, on the name plate, or specifically

recommended by Yamaha.

WARNING:

Do not place this product in a position where anyone could

walk on, trip over, or roll anything over power or connecting cords of any

kind. The use of an extension cord is not recommended! If you must use an

extension cord, the minimum wire size for a 25’ cord (or less) is 18 AWG.

NOTE: The smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at

the time of printing. However, Yamaha reserves the right to change or

modify any of the specifications without notice or obligation to update

existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound levels

that could cause permanent hearing loss. DO NOT operate for long

periods of time at a high volume level or at a level that is uncomfort-

able. If you experience any hearing loss or ringing in the ears, you

should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be dealer

assembled or installed. Please make sure that benches are stable and

any optional fixtures (where applicable) are well secured BEFORE

using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are

not covered by the manufacturer’s warranty, and are therefore the

owners responsibility. Please study this manual carefully and consult

your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi-

ronmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In keep-

ing with both the letter and the spirit of the law, we want you to be

aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of bat-

tery is approximately five years. When replacement becomes necessary,

contact a qualified service representative to perform the replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery being

charged.

When installing batteries, never mix old batteries with new ones, and

never mix different types of batteries. Batteries MUST be installed cor-

rectly. Mismatches or incorrect installation may result in overheating and

battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all bat-

teries away from children. Dispose of used batteries promptly and as

regulated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some rea-

son its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of prod-

ucts that contain lead, batteries, plastics, etc. If your dealer is unable

to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model

number, serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number, and the

date of purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reason-

able level of assurance that your use of this product in a residential

environment will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in

the users manual, may cause interference harmful to the operation

of other electronic devices. Compliance with FCC regulations does

not guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please con-

tact Yamaha Corporation of America, Electronic Service Division,

6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

Owner’s Manual

3

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge

som den ar ansluten till vägguttaget, även om själva apparaten

har stängts av.

ADVARSEL: Netspændingen til dette apparat er IKKE

afbrudt, sålæenge netledningen siddr i en stikkontakt, som er t

endt — også selvom der or slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita

koko laitetta verkosta.

(standby)

The serial number of this product may be found on the bottom

of the unit. You should note this serial number in the space

provided below and retain this manual as a permanent record

of your purchase to aid identification in the event of theft.

Model No.

Serial No.

(bottom)

Entsorgung leerer Batterien

(nur innerhalb Deutschlands)

Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte

Batterien oder Akkumulatoren dürfen nicht in den Hausmüll.

Sie können bei einer Sammelstelle für Altbatterien bzw.

Sondermüll abgegeben werden. Informieren Sie sich bei Ihrer

Kommune.

(battery)

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and elec-

tronic products and batteries should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable col-

lection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any

potential negative effects on human health and the environment which could otherwise arise from inappropriate

waste handling.

For more information about collection and recycling of old products and batteries, please contact your local munici-

pality, your waste disposal service or the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further informa-

tion.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local

authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set

by the Directive for the chemical involved.

(weee_battery_eu_en)

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park,

Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Digital Keyboard

Model Name : PSR-E423

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including

interference that may cause undesired operation.

See user manual instructions if interference to radio reception is

suspected.

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

(FCC DoC)

Owner’s Manual

4

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-

circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or radiators, and

do not excessively bend or otherwise damage the cord, place heavy objects on it,

or place it in a position where anyone could walk on, trip over, or roll anything

over it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the specified adaptor (page 86) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might spill into any

openings. If any liquid such as water seeps into the instrument, turn off the power

immediately and unplug the power cord from the AC outlet. Then have the

instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• Always replace all batteries at the same time. Do not use new batteries together

with old ones.

• Do not mix battery types, such as alkaline batteries with manganese batteries, or

batteries from different makers, or different types of batteries from the same

maker, since this can cause overheating, fire, or battery fluid leakage.

• Do not tamper with or disassemble batteries.

• Do not dispose of batteries in fire.

• Do not attempt to recharge batteries that are not intended to be charged.

• Keep batteries away from children.

• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid

should come in contact with your eyes, mouth, or skin, wash immediately with

water and consult a doctor. Battery fluid is corrosive and may possibly cause loss

of sight or chemical burns.

• Always make sure all batteries are inserted in conformity with the +/- polarity

markings. Failure to do so might result in overheating, fire, or battery fluid

leakage.

• When the batteries run out, or if the instrument is not to be used for a long time,

remove the batteries from the instrument to prevent possible leakage of the battery

fluid.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. (If you are using batteries,

remove all batteries from the instrument.) Then have the device inspected by

Yamaha service personnel.

• The power cord or plug becomes frayed or damaged.

• It emits unusual smells or smoke.

• Some object has been dropped into the instrument.

• There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the

instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold the

plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• Before moving the instrument, remove all connected cables.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power cord

from the wall AC outlet.

• Use only the stand specified for the instrument. When attaching the stand or rack,

use the provided screws only. Failure to do so could cause damage to the internal

components or result in the instrument falling over.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the desired

listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel or

keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing loss.

If you experience any hearing loss or ringing in the ears, consult a physician.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

Battery

If you notice any abnormality

Power supply/AC power adaptor

Location

Connections

Handling caution

(7)-1 1/2

Owner’s Manual

5

Always turn the power off when the instrument is not in use.

Even when the [ ](Standby/On) switch is in the “Standby” position, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for

a long time, make sure you unplug the power cord from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

NOTICE

To avoid the possibility of damage to the product, data or other property, follow the notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio

may generate noise.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)

to prevent the possibility of panel disfiguration or damage to the internal components.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

 Saving data

• Some data items (page 50) are automatically saved as backup data in the internal memory even if you turn the power off. Saved data may be lost due to

malfunction or incorrect operation. Save important data to external device such as a computer (page 77).

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal

use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use

others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and

sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of

copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.

 About functions/data bundled with the instrument

• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.

 About this manual

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your

instrument.

• Windows is a registered trademark of Microsoft

®

Corporation in the United States and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

(7)-1 2/2

Owner’s Manual

6

Logos

GM System Level 1

“GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible

music data can be accurately played by any GM-compatible tone generator, regardless of manufacturer.

The GM mark is affixed to all software and hardware products that support GM System Level.

XGlite

As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone generation for-

mat. Naturally, you can play back any XG song data using an XGlite tone generator. However, keep in

mind that some songs may play back differently compared to the original data, due to the reduced set of

control parameters and effects.

USB

USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting a computer with

peripheral Devices. It allows “hot swapping” (connecting peripheral devices while the power to the

computer is on).

Stereo Sampled Piano

The instrument has a special Portable Grand Piano Voice—created by state-of-the-art stereo sampling

technology and using Yamaha’s sophisticated AWM (Advanced Wave memory) tone generation system.

Touch Response

The exceptionally natural Touch Response feature, with a convenient front panel on/off switch, gives

you maximum expressive level control over the voices. It also works in conjunction with the Dynamic

Filter, which dynamically adjusts the timbre or tone of a voice according to your playing strength—just

a like a real musical instrument!

STYLE FILE

The Style File Format is Yamaha’s original style file format which uses a unique conversion system to

provide high-quality automatic accompaniment based on a wide range of chord types.

Owner’s Manual

7

About this Owner’s Manual and Data List

This manual consists of four main sections: “Setting Up,” “Quick Guide,” “Reference,” and “Appendix.”

Also, a separate “Data List” is provided.

Owner’s Manual (this book)

Data List

Voice List, MIDI Data Format, etc.

MIDI Reference

The MIDI Reference section contains MIDI related information. The MIDI Reference is available for

downloading from the Yamaha Manual Library at: http://www.yamaha.co.jp/manual/

Included Accessories

The package includes the following items. Please check that you have them all.

• Owner’s Manual

• Music rest

• Accessory CD-ROM

• Data List

• My Yamaha Product User Registration

* The PRODUCT ID on the sheet will be needed when

you fill out the User Registration form.

Setting Up

• • • • • • • • •

Please read this section first.

This section explains how to use the basic functions. Refer to this

section while playing the instrument.

Quick Guide

• • • • • • • • •

Reference

• • • • • • • • •

This section explains how to make detailed settings for the instru-

ment’s various functions.

Appendix

• • • • • • • • •

This section includes troubleshooting information and specifica-

tions.

Insert the music

rest into the slots

as shown.

Music Rest

Owner’s Manual

8

Special Features

Creating New Sounds

Page 22

By adjusting just two knobs you can add varying degrees of distortion, “sweet-

ness,” or other characteristics to a sound to change it subtly or drastically. Param-

eters that can be assigned to the knobs include effect, filter, envelope generator

and more. You can create new sounds in real time!

Arpeggio Function

Page 20

Similar to the arpeggio functions provided on some synthesizers, this function

automatically produces arpeggios (broken chords) when you simply play the

appropriate notes on the keyboard. A variety of arpeggios can be produced by

changing your fingering or the arpeggio type.

Performance assistant technology

Page 37

Play along with a song on the instrument’s keyboard and produce a perfect per-

formance every time ... even if you play wrong notes! All you have to do is play

on the keyboard—alternately on the left- and right-hand ranges of the keyboard,

for example—and you’ll sound like a pro as long as you play in time with the

music.

Play a Variety of Instrument Voices

Page 16

The instrument voice that sounds when you play the keyboard can be changed to

violin, flute, harp, or any of an extensive range of voices. You can change the

mood of a song written for piano, for example, by using violin to play it instead.

Experience a whole new world of musical variety.

Play Along with Styles

Page 27

Want to play with full accompaniment? Try the auto-accompaniment Styles.

The accompaniment styles provide the equivalent of a full backing band cover-

ing a wide variety of styles from waltzes to 8-beat to euro-trance ... and much

more. Select a style that matches the music you want to play, or experiment with

new styles to expand your musical horizons.

042

EuTrance

Owner’s Manual

9

Quick GuideReferenceAppendix Setting Up

Contents

About this Owner’s Manual and Data List ........................7

Included Accessories .......................................................7

Special Features ..............................................................8

Setting Up

Setting Up 10

Power Requirements......................................................10

Connecting Headphones (PHONES/OUTPUT Jack).....11

Connecting a Footswitch (SUSTAIN Jack).....................11

Turning the Power On ....................................................11

Panel Controls and Terminals 12

Basic Operation and Displays 14

Quick Guide

Try Playing a Variety of Instrument Voices 16

Select and Play a Voice—MAIN.....................................16

Play the Grand Piano Voice ...........................................17

Play Two Voices Simultaneously—DUAL ......................18

Play Different Voices with the Left and Right Hands

—SPLIT..........................................................................18

Using the Metronome.....................................................19

Creating Arpeggios 20

Use the Arpeggio Function.............................................20

Changing the Arpeggio type...........................................21

Create Original Sounds 22

Assigning Effects to the Knobs ......................................22

Using the Knobs.............................................................24

Playing Styles 26

Select a Style Rhythm....................................................26

Play Along with a Style...................................................27

Playing Songs 30

Select and Listen to a Song ...........................................30

Play Songs in Sequence ................................................31

Song Fast Forward, Fast Reverse, and Pause ..............32

Reference

Select a Song For a Lesson 33

The Easy Way to Play Piano 37

Play Using the Music Database 40

Change a Song’s Style 41

Record Your Own Performance 43

Memorize Your Favorite Panel Settings 48

Backup and Initialization 50

Backup ...........................................................................50

Initialization ....................................................................50

Handy Performance Features 51

Adding Reverb ...............................................................51

Adding Chorus ...............................................................51

Pitch Controls (Transpose) ............................................52

Pitch Controls (Tuning) ..................................................52

Setting the Metronome Time Signature .........................53

Adjusting the Metronome Volume..................................53

Pitch Bend......................................................................54

One Touch Setting .........................................................54

Select an EQ Setting for the Best Sound.......................54

Voice Settings 55

Voice Editing ..................................................................55

Selecting a Dual Voice...................................................56

Selecting a Split Voice ...................................................56

Touch Response Sensitivity...........................................56

Harmony ........................................................................57

Arpeggio Settings 58

Controlling Arpeggio Volume with

Keyboard Dynamics.......................................................58

Synchronizing an arpeggio to a tempo of

Style or Song .................................................................58

Holding the arpeggio Playback ......................................59

Style (Auto-accompaniment) Functions 60

Pattern Variation (Sections) ...........................................60

Changing the tempo of the Style....................................62

Adjusting the Style Volume ............................................62

Setting the Split Point.....................................................63

Tap Start ........................................................................63

Play a Style with Chords but No Rhythm

(Stop Accompaniment) ..................................................63

Loading Style Files.........................................................64

Looking Up Chords Using the Chord Dictionary ............65

Song Settings 66

BGM Playback ...............................................................66

Random Song Playback ................................................66

Changing the tempo of the Song ...................................67

Song Volume .................................................................67

A-B Repeat ....................................................................68

Muting Independent Song Tracks ..................................68

Tap Start ........................................................................69

Change the Melody Voice..............................................69

The Functions 70

Selecting and Setting Functions ....................................70

Connecting to a Computer 73

Connecting a Personal Computer..................................73

Transferring Performance Data to and

from a Computer ............................................................74

Transferring Data between the Computer and

Instrument ......................................................................75

Accessory CD-ROM Installation Guide 78

Important Notices about the CD-ROM ...........................78

CD-ROM Contents.........................................................79

System Requirements....................................................80

Software Installation.......................................................80

Appendix

Troubleshooting 85

Specifications 86

Index 87

Owner’s Manual

10

Setting Up

Be sure to do the following operations BEFORE turning on the power.

Power Requirements

Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an

AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not

deplete resources.

Using an AC Power Adaptor

1 Make sure that the [ ](Standby/On) switch of the

instrument is in the “Standby” position.

2 Connect the AC adaptor to the power supply jack.

3 Plug the AC adaptor into an AC outlet.

Using Batteries

1 Open the battery compartment cover located on the

instrument’s bottom panel.

2 Insert the six new batteries, being careful to follow

the polarity markings on the inside of the compart-

ment.

3 Replace the compartment cover, making sure that it

locks firmly in place.

For battery operation the instrument requires six 1.5V

“AA” size, LR6 or equivalent batteries. (Alkaline bat-

teries are recommended.) When battery power becomes

too low for proper operation, make sure to replace all

batteries, following the precautions listed below.

If necessary, also make sure to save all important User

data (see pages 50, 77).

• Use the specified adaptor (page 86). The use of other

adaptors may result in irreparable damage to both the

adaptor and the instrument.

• Unplug the AC Power Adaptor when not using the

instrument, or during electrical storms.

• Connecting the AC power adaptor automatically supplies

power from the adaptor and overrides battery power, even

when batteries are installed.

WARNING

CAUTION

AC outlet

AC power

adaptor

3

2

NOTE

• Be sure to install the batteries in the same direction, main-

taining the correct polarity (as shown). Incorrect battery

installation may result in heat, fire and/or leaking of corro-

sive chemicals.

• When the batteries run down, replace them with a com-

plete set of six new batteries. NEVER mix old and new bat-

teries. Do not use different kinds of batteries (e.g. alkaline

and manganese) at the same time.

• If the instrument will not be used for an extended period of

time, remove the batteries to prevent possible fluid leakage.

• Use only manganese or alkaline batteries for this instru-

ment. Other types of batteries (including rechargeable bat-

teries) may exhibit a sudden drop in power when the

batteries are low, possibly resulting in a loss of flash mem-

ory data.

• Please use the power adaptor when transferring data to

flash memory. Batteries (including rechargeable types) can

be drained rapidly by this type of operation. If the batteries

do become drained during a data transfer, both the data

being transferred and the data currently in the transfer des-

tination will be lost.

CAUTION

NOTICE

Setting Up

Owner’s Manual

11

Setting Up

Make all necessary connections below BEFORE turning the power on.

Connecting Headphones

(PHONES/OUTPUT Jack)

Any pair of stereo headphones with a 1/4" stereo

phone plug can be plugged in here for convenient

monitoring. The speakers are automatically shut off

when a plug is inserted into this jack.

The PHONES/OUTPUT jack also functions as an

external output. You can connect the PHONES/OUT-

PUT jack to a keyboard amplifier, stereo system,

mixer, tape recorder, or other line-level audio device

to send the instrument’s output signal to that device.

Connecting a Footswitch

(SUSTAIN Jack)

The sustain function lets you produce a natural sustain

as you play by pressing a footswitch. A Yamaha FC4

or FC5 footswitch plugged into this jack can be used

to switch sustain on and off.

Turning the Power On

The [ ](Standby/On) switch turns the power to the

instrument on ( ) or standby ( ). Turn down the

volume by turning the [MASTER VOLUME] control

to the left and press the [ ](Standby/On) switch to

turn on the power. Press the [ ](Standby/On) switch

again to turn the power off.

While playing the keyboard, adjust the volume level

by using the [MASTER VOLUME] control.

• Avoid listening with the headphones at high volume for

long periods of time; doing so may not only result in ear

fatigue, it may be damaging to your hearing.

• To prevent damage to the speakers, set the volume of the

external devices at the minimum setting before connecting

them. Failure to observe these cautions may result in elec-

tric shock or equipment damage. Also, be sure to set the

volumes of all devices at their minimum levels and gradu-

ally raise the volume controls while playing the instrument

to set the desired listening level.

WARNING

CAUTION

• The sustain function does not affect split voices.

• Make sure that the footswitch plug is properly connected

to the SUSTAIN jack before turning on the power.

• Do not press the footswitch while turning the power on.

Doing this changes the recognized polarity of the foot-

switch, resulting in reversed footswitch operation.

• Even when the switch is in the “STANDBY” position, elec-

tricity is still flowing to the instrument at the minimum

level. When you are not using the instrument for a long

time, make sure you unplug the AC power adaptor from

the wall AC outlet, and/or remove the batteries from the

instrument.

NOTE

CAUTION

Owner’s Manual

12

Setting Up

Panel Controls and Terminals

Front Panel

q [ ](Standby/On) switch...................... page 11

w LIVE CONTROL

[ASSIGN] button ...............................page 22

[A] and [B] knobs .............................page 22

e [MASTER VOLUME] control ................ page 11

r [DEMO/BGM] button ............................page 31

t [PERFORMANCE ASSISTANT]

button ....................................................page 37

y [EASY SONG ARRANGER] button......page 41

u [FUNCTION] button..............................page 70

i LESSON START

[WAITING] button..............................page 33

[YOUR TEMPO] button .....................page 35

[MINUS ONE] button.........................page 36

o [METRONOME] button................. pages 19, 53

!0 [TEMPO/TAP] button.. pages 19, 62, 63, 67, 69

!1 [REC] button.........................................page 43

!2 [1]–[5], [A] buttons ...............................page 44

!3 ARPEGGIO

[ON/OFF] button ...............................page 20

[TYPE] button ................................... page 21

!4 SONG CONTROL

[ ] (REPEAT & LEARN) button ... page 36

[ ] (A-B REPEAT) button .......... page 68

[] (REW) button........................... page 32

[ ] (FF) button............................... page 32

[ ] (PAUSE) button .......................... page 32

[ ] (START/STOP) button............page 32

!5 STYLE CONTROL

[ACMP ON/OFF] button.................... page 27

[INTRO/ENDING/rit.] button .............page 61

[MAIN/AUTO FILL] button ................page 61

[SYNC STOP] button ........................ page 61

[SYNC START] button....................... page 60

[START/STOP] button....................... page 26

!6 Dial ................................................ pages 14, 16

!7

CATEGORY [ ] and [ ] buttons

.. pages 14, 70

001

GrandPno

q

w

e

r

t

y

@6

@7

u

i

o

!0

!1

!3

!2

!5

!4

Front Panel

Song List (Data List) Style List (Data List) Display

(page 15)

f

r

Panel Controls and Terminals

Owner’s Manual

13

Setting Up

!8 [SONG] button ......................................page 30

!9 [STYLE] button .....................................page 26

@0 [MUSIC DATABASE] button.................page 40

@1 [VOICE] button .....................................page 16

@2 Number buttons [0]–[9],

[+] and [-] buttons ................................page 14

@3 [PORTABLE GRAND] button...............page 17

@4 REGIST MEMORY

[MEMORY/BANK], [1], [2] buttons ......page 48

@5 VOICE CONTROL

[SPLIT] button........................... pages 18, 56

[DUAL] button ........................... pages 18, 56

[HARMONY] button ..........................page 57

[TOUCH] button ................................page 56

@6 PITCH BEND wheel..............................page 54

@7 Drum Kit................................................page 16

The illustrations next to each key indicate the drum and per-

cussion instruments assigned to the keys when “Standard Kit

1” is selected.

Rear Panel

@8 USB terminal ........................................ page 73

@9 SUSTAIN jack ....................................... page 11

#0 PHONES/OUTPUT jack........................ page 11

#1 DC IN jack............................................. page 10

@5

!8

@0

@1

@2

@3

@4

!6

!7

@8 @9

#0 #1

!9

Rear Panel

Music Database List

(Data List)

Voice List (Data List)

Owner’s Manual

14

Setting Up

Basic Operation and Displays

Basic Operation

Press a button to select a basic function: Voice, Style or Song. To change the instrument voice that sounds when

you play the keyboard, press the [VOICE] button. If you want to play along with auto accompaniment, press the

[STYLE] button. If you want to listen to a song, press the [SONG] button.

001

GrandPno

Press briefly

to increase.

3 Start a function or play

the keyboard.

2 Select an item

or value.

1 Select a basic

function.

Rotate the dial clockwise to

increase the value of the

selected item, or counter-

clockwise to decrease it’s

value. Rotate the dial con-

tinuously to continuously

increase or decrease the

value.

Dial

Increase

When selecting a song or style,

you can use these buttons to jump

to the first item in the next or previ-

ous category.

The CATEGORY [ ] and [ ]

buttons can also be used to select

function items sequentially after

pressing the [FUNCTION] button.

CATEGORY [ ] and [ ] buttons

f

r

f

r

The number buttons can be

used to directly enter a Song,

Style or Voice number or

parameter value.

For numbers that start with

one or two zeroes, the first

zeroes can be omitted.

Example:

Selecting Voice 003, Bright

Piano.

Number buttons [0]–[9]

Press the [+] button briefly

to increase the value by 1, or

press the [-] button briefly to

decrease the value by 1.

Press and hold either button

to continuously increase or

decrease the value in the cor-

responding direction.

[+], [-] buttons

Decrease

Press briefly

to decrease.

Jump to the

first item in

the next or

previous cat-

egory.

Press number but-

tons [0], [0], [3].

The “Press & Hold” Symbol

Buttons having this indication can be used to call up an alternate func-

tion when the relevant button is pressed and held.

Hold down this button until the function calls up.

Press the [SONG] button to access the SONG functions (printed above the

buttons), and press the [STYLE] button to access the STYLE functions

(printed below).

Basic Operation and Displays

Owner’s Manual

15

Setting Up

Display Items

The display shows all of the current basic settings: song, style, voice.

It also includes a range of indicators that show the on/off status of a range of functions.

001

GrandPno

Indicates that Touch response is

turned on. (page 56)

Indicates that Harmony is

turned on. (page 57)

Indicates that the Dual voice is

turned on. (page 18)

Indicates that the Split voice is

turned on. (page 18)

Indicates that the Arpeggio is

turned on. (page 20)

Indicates that performance

assistant technology is turned

on. (page 36)

Indicates that Accompaniment

is turned on. (page 27)

Indicates that SYNC STOP is

turned on. (page 61)

TOUCH

HARMONY

DUAL

SPLIT

ARPEGGIO

Performance assistant technology

ACMP ON

SYNC STOP

Displays the melody and

chord notes of a song when

the Song Lesson function is

in use, or the notes of chords

you specify when the Dic-

tionary function is in use. At

other times the notes you

play on the keyboard are dis-

played.

Notation

• Any notes occurring below or above the staff are

indicated by “8va” in the notation.

• For a few specific chords, not all notes may be

shown in the notation section of the display. This

is due to space limitations in the display.

NOTE

Indicates the beat number in a mea-

sure during the Metronome func-

tion. Indicates the current measure during playback

of a song or style, and the currently set Tempo

value for the song or style. (pages 45, 53)

Indicates the name of the chord cur-

rently being played back, or the

name of the chord being played on

the keyboard. (page 27)

Information related to the

song tracks is shown here.

(pages 32, 44, 68)

BEAT number and MEASURE

Chord Display

Track Display

001

Indicates the current style or song

beat with flashing arrows. (page 31)

This display allows you to visually

confirm parameters assigned to the

knobs. (page 22)

Beat Display

Knob Assign Display

Owner’s Manual

16

Quick Guide

Try Playing a Variety of Instrument Voices

In addition to piano, organ, and other “standard” keyboard instruments, this instru-

ment has a large range of voices that includes guitar, bass, strings, sax, trumpet,

drums and percussion, sound effects … a wide variety of musical sounds.

This procedure selects the main voice you will play on the keyboard.

1

Press the [VOICE] button.

The voice number and name will be displayed.

2

Select the voice you want to play.

While watching the displayed voice name rotate the dial. The avail-

able voices will be selected and displayed in sequence. The voice

selected here becomes the main voice.

For this example select the “141 Flute” voice.

Preset Voice Types

Select and Play a Voice—MAIN

001

GrandPno

Appears when the Voice

mode is engaged.

Voice name

Voice number

• You can also select the voice

using the CATEGORY [ ]

and [ ] buttons after press-

ing the [VOICE] button.

(page 14)

NOTE

f

r

141

Flute

Select 141 Flute

001–183 Instrument Voices

184–198

(Drum Kit)

Various drum and percussion sounds are assigned to

individual keys, via which they can be played. Details

on assigning instruments to keys are provided in the

Drum Kit List of the separate Data List.

199–238 Arpeggio voices for arpeggio performance.

Quick Guide

Try Playing a Variety of Instrument Voices

Owner’s Manual

17

Quick Guide

3

Play the keyboard.

Try selecting and playing a variety of voices.

When you just want to play piano, all you have to do is press one convenient button.

Press the [PORTABLE GRAND] button.

The “001 Grand Piano” voice will be selected.

• Voice Settings (page 55)

NOTE

Play the Grand Piano Voice

• When you press the [POR-

TABLE GRAND] button all

settings other than touch

sensitivity are turned off. The

dual and split voices will

also be turned off, so only

the Grand Piano voice will

play over the entire key-

board.

NOTE

Try Playing a Variety of Instrument Voices

Owner’s Manual

18

Quick Guide

Once you press the [DUAL] button to turn the dual function on, a second voice will sound that will

play in addition to the main voice when you play the keyboard. The second voice is known as the

“dual” voice.

Press the button a second time to turn the dual voice function off. A suitable

dual voice is automatically selected when you turn on this function, but you

can easily select a different dual voice (page 56).

Once you press the [SPLIT] button to turn the split function on, you can play different voices to the

left and right of the keyboard “split point”. The main and dual voices can be played to the right of the

split point, while the voice played to the left of the split point is known as the “split voice”. The split

point setting can be changed as required (

page 63).

Press the button a second time to turn the split voice function off. A suitable

split voice is automatically selected when you turn on this function, but you

can easily select a different split voice (page 56).

Play Two Voices Simultaneously—DUAL

141

Flute

Appears when

dual voice is on

Two voices will sound

at the same time.

Play Different Voices with the Left and Right Hands—SPLIT

141

Flute

Split voice

Split point

Main voice and dual voice

Appears when split

voice is on

Try Playing a Variety of Instrument Voices

Owner’s Manual

19

Quick Guide

The instrument features a built-in metronome (a device that keeps an accurate tempo) that is con-

venient for practicing.

Press the [METRONOME] button to start the metronome. To stop the met-

ronome, press the [METRONOME] button again.

If you want to adjust the metronome tempo, press the [TEMPO/TAP] button

to call up the Tempo setting in the display, then you can use the dial to set

the tempo. You can also set the tempo using the number buttons on the front

panel.

Using the Metronome

• You can set the time signa-

ture (page 53).

NOTE

090

Tempo

Current Tempo value

Owner’s Manual

20

Quick Guide

Creating Arpeggios

The arpeggio function lets you create arpeggios (broken chords) by simply playing the

required notes on the keyboard. For example, you could play the notes of a triad—the

root, third, and fifth—and the arpeggio function will automatically create a variety of

interesting arpeggio-type phrases. By changing the arpeggio type and the notes you

play it is possible to create a wide range of patterns and phrases that can be used for

music production as well as performance.

1

Press the ARPEGGIO [ON/OFF] button to turn the

arpeggio function on.

The indicator lights when the Arpeggio function is on.

2

Play a note or notes on the keyboard to trigger

Arpeggio playback.

The sound of the arpeggio produced will change according to the

number of notes you play and the area of the keyboard you play in.

When the split function is on, the arpeggio applies to the split voice.

The arpeggio applies to the main and dual voices when the split func-

tion is off. Arpeggios cannot be played using the split and main/dual

voices simultaneously.

3

When you have finished playing with the arpeggio

function, press the ARPEGGIO [ON/OFF] button to

turn it off.

Use the Arpeggio Function

• When you select a voice

number between 199 and

238 the arpeggio function

will automatically be turned

on.

• Play a key to the left of the

keyboard split point

because the arpeggio func-

tion applies only to the split

voice when you select a

voice between 229 and 238.

NOTE

• When an FC4 or FC5 foot-

switch is connected to the

SUSTAIN jack is pressed,

the Arpeggio will continue to

play after the note is

released (page 59).

NOTE

Sayfa yükleniyor ...

Yamaha PSR-80 El kitabı

Bu kılavuz için de uygundur

Yamaha PSR-80 El kitabı

Diğer dillerde

İlgili Makaleler