Samsung SCC-B2091P Kullanım kılavuzu

DIGITAL COLOR CAMERA

E

Tu

User’s Manual

SCC-B2391(P)

SCC-B2091P

SCC-B2300

SCC-B2391,B2091,B2300-Eng.indd 1SCC-B2391,B2091,B2300-Eng.indd 1 2007-05-18 오전 11:31:382007-05-18 오전 11:31:38

E

Important Safety Instructions

CAUTION: TO REDUCE

THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE

REAR COVER. NO USER

SERVICEABLE PARTS INSIDE.

REFER TO QUALIFIED

SERVICE PERSONNEL.

To prevent damage which may result in fire or electric shock hazard,

do not expose this appliance to rain or moisture.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions.

1) This device may not cause harmful interference, and

2) This device must accept any interference that may cause

undesired operation.

CAUTION:

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer.

Dispose of used batteries according to the manufacturer's instructions.

This symbol indicates

high voltage is present

inside. It is dangerous to

make any kind of contact

with any inside part of this

product.

This symbol alerts you

that important literature

concerning operation and

maintenance has been

included with this product.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

2

SCC-B2391,B2091,B2300-Eng.indd 2SCC-B2391,B2091,B2300-Eng.indd 2 2007-05-18 오전 11:31:412007-05-18 오전 11:31:41

3

E

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat

registers, or other apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided

for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being from being walked on or

pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a used, caution

when moving the cart/apparatus combination to avoid injury from

tip-over.

13. Unplug this apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-

over.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or been

dropped.

SCC-B2391,B2091,B2300-Eng.indd 3SCC-B2391,B2091,B2300-Eng.indd 3 2007-05-18 오전 11:31:432007-05-18 오전 11:31:43

4

E

Chapter 1

Introduction

........................................................ 5

Chapter 2

Special Features

............................................... 6

Chapter 3

Installation

......................................................... 7

Checking the contents of the package

............ 7

Precautions in Installation and Use

................. 8

Connecting Auto Iris Lens Connector

............. 9

Lens Fixing

.................................................................

10

Setting Lens Selection Switch

...............................

11

Back Focus Adjustment

.................................... 11

Connecting Cables and Checking Operation

... 13

Chapter 4

Part Names and Functions

.............................. 15

Product Specification

........................................ 20

Contents

SCC-B2391,B2091,B2300-Eng.indd 4SCC-B2391,B2091,B2300-Eng.indd 4 2007-05-18 오전 11:31:442007-05-18 오전 11:31:44

5

E

Chapter 1 Introduction

DAYNIGHT camera is a low brightness camera, which improves the sensitivity by

operating with a color mode at the over of regular brightness and operated with a

B/W mode by canceling the IR Cut function at the below of regular brightness. Also, it

can be used linked with the separated infrared ray emission device. SCC-B2391(P)/

B2091P has a high resolution with the 540 TV Lines of horizontal resolution through

the digital signal processing and OLPF.

> In the mechanical fluorescent light environment, if you attach MANUAL IRIS LENS

and turn the ELC switch among FUNCTION switches on, color may be rolled.

In this case, supply AC power before you turn L/L switch among FUNCTION

switches on. (NTSC:60HZ , PAL:50HZ)

[DAYNIGHT]

It is a function of a color camera to delete the fiter with the

IR Cut function in an illumination below the standard value

so that it has a better sensitivity.

COLOR ROLLING is the problem that color on the monitor

screen changes non-periodically.

This happens when White Balance is not fixed, because a

mechanical fluorescent light flickers when it’s cycle is the

same to the cycle of the power frequency.

SCC-B2391,B2091,B2300-Eng.indd 5SCC-B2391,B2091,B2300-Eng.indd 5 2007-05-18 오전 11:31:452007-05-18 오전 11:31:45

6

E

High Sensitivity

It has an up-to-date 1/3" Super-HAD IT CCD for an image of high sensitivity.

Resolution

It realizes high resolution resulting from full digital image processing

supported by a state-of-art digital signal technology.

Superior Back Light Adjustment Function

In case the object has a bright illumination or sunlight behind it, this camera

adjusts the image shaded by the back light for clear photographs.

Digital Power Supply Synchronization Method

The Full Digital Method Line Lock is realized in this camera, which adjusts

the vertical camera synchronization directly to improve controllability and

reliability of the camera.

Chapter 2 Special Features

SCC-B2391,B2091,B2300-Eng.indd 6SCC-B2391,B2091,B2300-Eng.indd 6 2007-05-18 오전 11:31:462007-05-18 오전 11:31:46

7

E

This chapter describes what should be checked before installation, how to

set the installation environment, and what should be done during installation.

Then, it describes how to install the camera and connect the cable in actual

circumstances.

Chapter 3 Installation

Be sure to check if the following items are included in the package.

Checking the contents of the package

Camera

Holder(Mount)

C Mount Adapter Auto Iris

Lens Connector

User's Manual

Camera

SCC-B2391,B2091,B2300-Eng.indd 7SCC-B2391,B2091,B2300-Eng.indd 7 2007-05-18 오전 11:31:472007-05-18 오전 11:31:47

E

 Do not attempt to disassemble the camera yourself.

 Be cautious in handling the camera. Avoid striking or shaking the camera.

Be cautious to avoid damage on the camera caused by improper storage

or operation.

 Do not expose this camera to rain or moisture. Do not operate this

camera on a wet place.

 Do not use strong or abrasive detergents when cleaning the camera

body. Use a dry cloth to clean the camera.

 Keep the camera at a cool place away from the direct sunlight. Leaving it

under the direct sunlight may result in the malfunction of the unit.

Precautions in Installation and Use

SCC-B2391,B2091,B2300-Eng.indd 8SCC-B2391,B2091,B2300-Eng.indd 8 2007-05-18 오전 11:31:482007-05-18 오전 11:31:48

9

E

Connecting Auto Iris Lens Connector

Prepare the following Auto Iris Lens Connector supplied with the camera.

Connect the cable of the control cable, whose covering is stripped, to the

Auto Iris Lens Connector as shown below.

Rb

Pin3

Pin2

Pin4

Pin1

Pin No. DC Control Type

VIDEO Control Type

1 Damp(-) Power (+12V)

2 Damp(+) N/A

3 Damp(+) VIDEO Signal

4 Damp(-) GROUND

SCC-B2391,B2091,B2300-Eng.indd 9SCC-B2391,B2091,B2300-Eng.indd 9 2007-05-18 오전 11:31:492007-05-18 오전 11:31:49

In case of CS lenses

Turn the CS lens clockwise until it is fixed as shown as follows.

In case of C lenses

Turn the C-mount adapter clockwise to fix it. Then turn the C lens

clockwise until it is fixed as follows.

Lens Fixing

CS lens

C lens

10

E

SCC-B2391,B2091,B2300-Eng.indd 10SCC-B2391,B2091,B2300-Eng.indd 10 2007-05-18 오전 11:31:502007-05-18 오전 11:31:50

Back Focus Adjustment

Setting Lens Selection Switch

11

E

The camera back focus is adjusted at the plant before delivery, but some

lenses are out of focus though the number differs in types. If it's the case,

you should make the back focus adjustment as follows. First, this is the back

focus adjustment procedure for fixed focus lenses.

Lenses without zoom function

 Image an object with high resolution(letticed) at more than 10m distance

and put the lens focus ring in the infinite(

∞

) position.

 Rotate the BACK FOCUS control bar until the object is seen best.

 Tighten the BACK FOCUS control bar fixing screw.

When lens mounting is completed, set the Lens selection Switch on the side

of the camera according to the mounted lens type. When the mounted lens

is an Auto Iris Lens of the DC control type, set the Lens Selection Switch to

"DC". When the mounted lens is an Auto Iris Lens of the Video control type,

set the Lens Selection Switch to "VIDEO".

SCC-B2391,B2091,B2300-Eng.indd 11SCC-B2391,B2091,B2300-Eng.indd 11 2007-05-18 오전 11:31:522007-05-18 오전 11:31:52

12

E

Lenses with zoom function

 Image an object with high resolution(letticed) at a distance of 3 to 5 m

and zoom in the lens as close to TELE as possible. Then adjust the lens

focus bar until the object is seen best.

 Zoom in the lens as close to WIDE as possible and adjust the BACK

FOCUS adjustment bar until the object is seen best.

 Repeat from  to  above 2 or 3 times until the focus on the ZOOM

TELE side is in line with that on the ZOOM WIDE side.

BACK FOCUS

CONTROL BAR

SCC-B2391,B2091,B2300-Eng.indd 12SCC-B2391,B2091,B2300-Eng.indd 12 2007-05-18 오전 11:31:532007-05-18 오전 11:31:53

Connecting Cables and Checking Operation

13

E

1 First, connect the connector of the BNC cable to the Video Out terminal

2 Second, connect the other connector of the BNC cable to the Video In

terminal.

BNC cable

Video Out Terminal

Video In Terminal of

Monitor Rear Surface

SCC-B2391,B2091,B2300-Eng.indd 13SCC-B2391,B2091,B2300-Eng.indd 13 2007-05-18 오전 11:31:542007-05-18 오전 11:31:54

14

E

3 Third, connect the power cable.

 AC24V/DC12V Power Input Camera.

Connect 2 lines of the power adapter using a screwdriver to the power

IN Terminal of the camera as shown below.

>

Without the distinction of the polarity, connect to the AC24 or DC12V

power source.

 AC230V Power Input Camera

Connect the power input cord to the AC230V power source.

SCC-B2391,B2091,B2300-Eng.indd 14SCC-B2391,B2091,B2300-Eng.indd 14 2007-05-18 오전 11:31:552007-05-18 오전 11:31:55

15

E

Chapter 4 Part Names and Functions



Mount Adapter Fixing Groove

This groove is used for screwing the mount adapter, a part of the bracket where the

camera will be installed.



Camera Lens(Option)

This lens is installed in the camera.

>

A camera lens with a stained surface should be cleaned softly with a lens

tissue or ethanol painted cotton cloth.



Auto Iris Lens Connector

This connector provides the automatic shutter lens with power supply, control signal,

video signal, or DC signal necessary for the control of the lens shutter.



Auto Iris Lens Control Cable

This cable transmits signal which controls the Iris.



ALC Lens Selection Switch

This Switch is used for select the type of Lens.



Back Focus Control Bar

This bar is used for set back focus of the camera.

Side View



Auto Iris Lens

Control Cable



ALC Lens

Selection Switch



Auto Iris Lens

Connector



Mount Adapter Fixing

Groove



Back Focus

Control Bar

 Camera Lens

SCC-B2391,B2091,B2300-Eng.indd 15SCC-B2391,B2091,B2300-Eng.indd 15 2007-05-18 오전 11:31:562007-05-18 오전 11:31:56

16

E

Rear View

AC24V/DC12V Camera (SCC-B2391(P))

AC230V Camera (SCC-2091P)











 





 







SCC-B2391,B2091,B2300-Eng.indd 16SCC-B2391,B2091,B2300-Eng.indd 16 2007-05-18 오전 11:31:582007-05-18 오전 11:31:58

17

E

 Power connection port

AC24V/DC12V Camera : It is a port connected to the power adaptor cable.

AC230V Camera : It is Power cord.

 POWER LED

If the power of a camera is supplied normally, the LED is ON.

  INC and DEC Switch

Both switches increase or decrease the profit of RED and BLUE to fix a color

temperature as you wish while AWB among the FUNCTION switches is

off(USER) and control the vertical synchronous phase while both AWB and

L/L are on.

 FUNCTION Switch

1. L/L 2. ELC

3. FL 4. AWB

SW1 SW2 SW3 SW4

ON

SCC-B2391,B2091,B2300-Eng.indd 17SCC-B2391,B2091,B2300-Eng.indd 17 2007-05-18 오전 11:31:592007-05-18 오전 11:31:59

18

E

1) SW1(L/L) :

Set to OFF, the camera activates the internal synchronization mode and set to ON, the power

synchronization mode. If you connect multi cameras to the sequential switcher to enter the

automatic conversion mode, the screen will bounce every screen while the camera stays

in INT(internal synchronization). Such bouncing phenomena may be cleared and screen

conversion becomes smooth by setting the L/L switch to ON and using the INT/DEC switch to

control the vertical synchronous phase.

>

If you want to control the vertical synchronous phase with the INT/DEC switch when L/L is set

to ON, you shall set SW4 to AWB ON.

>

In case of DC12V, INT(internal synchronizer) will be fixed without regard to ON/OFF of L/L.

2) SW2(ELC) :

Use this switch with the Manual Iris Lens. While this switch is ON, the speed of the electronic

shutter varies with the brightness of the subject from 1/60(50) to 1/100,000 sec for automatically

controlling the brightness of the screen. However, with the Auto Iris Lens (DC or Video Control),

be sure to switch OFF.

Color Rolling may occur in this mode. In that case, input AC power source to the camera and

select SW1 "ON".

(NTSC : 60HZ, PAL : 50HZ)

3) SW3(FL):

This is to prevent flicker on the screen when NTSC system is used in 50HZ power supply region and

PAL system is used in 60HZ power supply region. That is to prevent shaking on the screen resulted

from the discordance of the vertical sync frequency and the flicker frequency of the illumination. While

this switch is ON, the electronic shutter is fixed to 1/100sec (NTSC) or 1/120 sec (PAL).

4) SW4(AWB):

When setting up ON, the color of screen is adjusted automatically in accordance with the change

of lighting color temperature by the change of outer environment. (ATW) If the lighting condition

is steady, OFF setting is available. The camera memorizes the lighting color temperature at the

time when the switch setting is changed from ON to OFF, and the camera color is adjusted to the

memorized color temperature. (AWC) If the lighting color temperature is changed and you want

to make the camera be memorized/operated with the changed color temperature, re-operate the

switch On/Off operation. However, be aware that an error may occur under the following conditions

.

First, a case that the subject is big, single color of the high chroma, and in the center of the

screen or a case with almost no white color on the screen.

Second, a case with a specific illumination such as a natrium lamp

SCC-B2391,B2091,B2300-Eng.indd 18SCC-B2391,B2091,B2300-Eng.indd 18 2007-05-18 오전 11:32:002007-05-18 오전 11:32:00

19

E



DC IRIS Level Controller

When the ALC lens selection switch is set to DC, use the same control bar as the

driver to control the IRIS level.



Video Output Port

This port shall be connected to the monitor video input port or equivalent. You

may output camera video signals through this port.



DAYNIGHT Selection Switch

If you set this switch to AUTO, the DAYNIGHT function will be automatically

activated according to the illumination. Under poor illumination, IR Filter will be

automatically eliminated in the black and white mode(BW Mode) to raise the

sensitivity but under good illumination, IR Filter will be automatically inserted in

the color mode(COLOR Mode).

IR Filter responds to the preset Duration Time (Delivery Condition:10 seconds).

When you convert DAYNIGHT in the AUTO mode, you shall set Duration Time as

follows. (Please turn off the L/L switch and the AWB switch to begin with).

Whenever you convert the DAYNIGHT selection switch from EXT to AUTO while

you hold on to the INC/DEC switch, DURATION TIME becomes 10s, 30s, 60s,

90s, 120s, and 150s in sequence. Upon setup, you shall cancel pressing the

INC/DEC switch to save the setup condition in the camera. Upon saving, the

DAYNIGHT mode will be automatically converted depending on DURATION

TIME even in the event of POWER On/Off.

For resetting, please repeat the above procedure. (Upon resetting, you may

return both L/L and AWB to the previous condition.)

If you set this switch to EXT, COLOR/BW Mode varies depending on the external

signal input to the DAYNIGHT external signal input port().



DAYNIGHT External Signal Input Port

When the DAYNIGHT selection switch() is set to EXT, COLOR/BW Mode varies

depending on the input signal to this port.

The input terminal shall be DC5V pull-up input and over 0.2mA.

OFF : Open contact

ON : Closed contact

SCC-B2391,B2091,B2300-Eng.indd 19SCC-B2391,B2091,B2300-Eng.indd 19 2007-05-18 오전 11:32:012007-05-18 오전 11:32:01

20

E

Product Specification

SCC-B2391P/B2091P

ITEM

Contents

Product Type

CCTV Camera

Broadcasting System

PAL STANDARD SYSTEM

CCD

1/3" Super-HAD CCD

Effective Pixels

752(H) x 582(V)

Scanning Type

625 Line, 2:1 Interlace

INTERNAL : 15,625Hz(H)

50 Hz(V)

LINE LOCK : 15,625Hz(H)

50 Hz(V)

INTERNAL

LINE LOCK(When AC Power source is used)

Resolution(H)

540(Color)/570(B/W) TV Lines

S/N Ratio

About 50dB

DAYNIGHT

AUTO / EXT

Frequency

Sync Type

Minimum Illumination

of Object

0.3 Lux(Color) / 0.06 Lux(B/W)

SCC-B2391,B2091,B2300-Eng.indd 20SCC-B2391,B2091,B2300-Eng.indd 20 2007-05-18 오전 11:32:022007-05-18 오전 11:32:02

Sayfa yükleniyor...

Samsung SCC-B2091P Kullanım kılavuzu

Samsung SCC-B2091P Kullanım kılavuzu

diğer dillerde

İlgili makaleler