Yamaha RX-V781 El kitabı

AV Receiver

Owner’s Manual

Read the supplied booklet “Safety Brochure” before using the unit.

EN

En 2

CONTENTS

Introduction 5

Accessories................................................................................... 5

About this book ............................................................................ 5

About remote control .................................................................... 5

Batteries (AAA, R03, UM-4) (x2) ...................................................................................................................... 5

Operating range of the remote control......................................................................................................... 5

FEATURES 6

What you can do with the unit........................................................ 6

Part names and functions .............................................................. 8

Front panel (RX-V781) .................................................................................................................................... 8

Front panel (RX-V681) .................................................................................................................................. 10

Front display (indicators) ............................................................................................................................ 12

Rear panel (RX-V781).................................................................................................................................... 13

Rear panel (RX-V681).................................................................................................................................... 15

Remote control ............................................................................................................................................ 17

PREPARATIONS 18

General setup procedure ..............................................................18

1 Connecting speakers ..................................................................19

Basic speaker configuration ........................................................................................................................ 20

Advanced speaker configuration ................................................................................................................ 27

2 Connecting a TV and playback devices .........................................32

Input/output jacks and cables .................................................................................................................... 32

Connecting a TV ........................................................................................................................................... 33

Connecting video devices (such as BD/DVD players) ................................................................................. 35

Connecting audio devices (such as CD players) ......................................................................................... 38

Connecting to the jacks on the front panel ................................................................................................ 38

3 Connecting the FM/AM antennas..................................................39

4 Connecting a network cable or preparing the wireless antenna .....40

Connecting the network cable.....................................................................................................................40

Preparing the wireless antenna ...................................................................................................................40

5 Connecting other devices............................................................41

Connecting an external power amplifier.....................................................................................................41

Connecting a device compatible with the trigger function ........................................................................41

6 Connecting the power cable........................................................42

7 Selecting an on-screen menu language ........................................43

8 Configuring the necessary speaker settings..................................44

9 Optimizing the speaker settings automatically (YPAO) ..................45

Measuring at one listening position (single measure) ................................................................................47

Measuring at multiple listening positions (multi measure) (RX-V781 only)...............................................48

Checking the measurement results .............................................................................................................50

Reloading the previous YPAO adjustments .................................................................................................50

Error messages .............................................................................................................................................51

Warning messages........................................................................................................................................52

10 Connecting to a network device wirelessly .................................53

Selecting the connection method ...............................................................................................................53

Connecting the unit to a wireless network..................................................................................................54

Connecting a mobile device to the unit directly (Wireless Direct) .............................................................59

11 Connecting to the MusicCast network ........................................61

MusicCast CONTROLLER ..............................................................................................................................61

Adding the unit to the MusicCast network ..................................................................................................61

PLAYBACK 62

Basic playback procedure.............................................................62

Selecting an HDMI output jack.....................................................................................................................62

Selecting the input source and favorite settings with one touch

(SCENE) ......................................................................................63

Registering a scene.......................................................................................................................................63

En 3

Selecting the sound mode.............................................................64

Enjoying stereoscopic sound fields (CINEMA DSP 3D) ............................................................................... 65

Enjoying unprocessed playback.................................................................................................................. 68

Enjoying pure high fidelity sound (Pure Direct).......................................................................................... 69

Playing back digitally compressed formats (such as MP3, etc.) with enriched sound

(Compressed Music Enhancer) .................................................................................................................... 69

Listening to FM/AM radio ..............................................................70

Setting the frequency steps......................................................................................................................... 70

Selecting a frequency for reception............................................................................................................ 70

Registering favorite radio stations (presets) .............................................................................................. 71

Radio Data System tuning ........................................................................................................................... 72

Operating the radio on the TV ..................................................................................................................... 73

Playing back music via Bluetooth ..................................................74

Playing back Bluetooth device music on the unit ...................................................................................... 74

Enjoying audio using Bluetooth speakers/headphones ............................................................................ 75

Playing back music stored on a USB storage device.........................76

Connecting a USB storage device ............................................................................................................... 76

Playback of USB storage device contents .................................................................................................. 76

Playing back music stored on media servers (PCs/NAS) ...................79

Media sharing setup..................................................................................................................................... 79

Playback of PC music contents ................................................................................................................... 80

Listening to Internet radio ............................................................83

Playback of Internet radio ........................................................................................................................... 83

Registering favorite Internet radio stations (bookmarks) ......................................................................... 85

Playing back iTunes/iPod music with AirPlay..................................86

Playback of iTunes/iPod music contents.................................................................................................... 86

Playing back music in multiple rooms (multi-zone).........................88

Preparing Zone2........................................................................................................................................... 88

Controlling Zone2 ........................................................................................................................................ 90

Registering favorite items (shortcut).............................................92

Registering an item ...................................................................................................................................... 92

Recalling a registered item.......................................................................................................................... 92

Controlling the unit from a web browser (web control) ...................93

Top menu screen.......................................................................................................................................... 94

Control screen .............................................................................................................................................. 94

Settings screen............................................................................................................................................. 95

Viewing the current status............................................................96

Switching information on the front display ................................................................................................96

Viewing the status information on the TV ...................................................................................................96

Configuring playback settings for different playback sources

(Option menu).............................................................................97

Option menu items.......................................................................................................................................97

CONFIGURATIONS 101

Configuring input sources (Input menu)....................................... 101

Input menu items .......................................................................................................................................101

Configuring the SCENE function (Scene menu) ............................. 103

Scene menu items ......................................................................................................................................104

Configuring sound programs/surround decoders

(DSP Program menu) ................................................................. 105

DSP Program menu items ..........................................................................................................................106

Configuring various functions (Setup menu) ................................ 108

Setup menu items.......................................................................................................................................109

Speaker (Manual Setup) .............................................................................................................................111

Sound ..........................................................................................................................................................114

Video............................................................................................................................................................116

HDMI ............................................................................................................................................................117

Network.......................................................................................................................................................119

Bluetooth ....................................................................................................................................................121

Multi Zone ...................................................................................................................................................122

Function ......................................................................................................................................................123

ECO ..............................................................................................................................................................125

Language.....................................................................................................................................................126

Viewing information about the unit (Information menu) ............... 126

Types of information ..................................................................................................................................127

Configuring the system settings (ADVANCED SETUP menu)............ 128

ADVANCED SETUP menu items ..................................................................................................................129

Changing the speaker impedance setting (SP IMP.) .................................................................................129

Selecting the remote control ID (REMOTE ID) ...........................................................................................129

Changing the FM/AM tuning frequency setting (TU).................................................................................129

Switching the video signal type (TV FORMAT)...........................................................................................130

En 4

Removing the limitation on HDMI video output (MON.CHK) ................................................................... 130

Selecting the HDMI 4K signal format (4K MODE) ...................................................................................... 130

Restoring the default settings (INIT) ......................................................................................................... 130

Updating the firmware (UPDATE).............................................................................................................. 131

Checking the firmware version (VERSION) ............................................................................................... 131

Updating the unit’s firmware via the network .............................. 132

APPENDIX 133

Frequently asked questions ........................................................ 133

Troubleshooting ........................................................................134

First, check the following:.......................................................................................................................... 134

Power, system and remote control........................................................................................................... 134

Audio........................................................................................................................................................... 135

Video ........................................................................................................................................................... 137

FM/AM radio................................................................................................................................................ 138

Bluetooth.................................................................................................................................................... 139

USB and network ....................................................................................................................................... 139

Error indications on the front display .......................................... 141

Glossary .................................................................................... 142

Audio information (audio decoding format) ............................................................................................ 142

Audio information (others) ........................................................................................................................ 143

HDMI and video information ..................................................................................................................... 144

Network information ................................................................................................................................. 144

Yamaha technologies................................................................................................................................. 144

Supported devices and file formats .............................................145

Supported devices ..................................................................................................................................... 145

File formats................................................................................................................................................. 145

Video signal flow........................................................................146

Video conversion table .............................................................................................................................. 146

Information on HDMI..................................................................147

HDMI Control .............................................................................................................................................. 147

Audio Return Channel (ARC)...................................................................................................................... 148

HDMI signal compatibility.......................................................................................................................... 149

Trademarks............................................................................... 150

Specifications............................................................................151

En 5

Introduction

Accessories

Check that the following accessories are

supplied with the product.

☐

AM antenna

☐

FM antenna

* One of the above is supplied depending on the

region of purchase.

☐

YPAO microphone

☐

Remote control

☐

Batteries (AAA, R03, UM-4) (x2)

☐

CD-ROM (Owner’s Manual)

☐

Easy Setup Guide

☐

Safety Brochure

About this book

• The illustrations of the main unit used in this manual are of the RX-V781 (U.S.A. model),

unless otherwise specified.

• In this manual, illustrations of English menu screens are used as examples.

• Some features are not available in certain regions.

• Due to product improvements, specifications and appearance are subject to change without

notice.

• This manual explains operations using the supplied remote control.

Icons used in this manual

Y

indicates precautions for use of the unit and its feature limitations.

X

indicates supplementary explanations for better use.

About remote control

This section explains how to use the supplied remote control.

Batteries

Insert the batteries the right way round.

Operating range of the remote control

X

Point the remote control at the remote control sensor on the unit and remain within the operating range shown

below.

30° 30°

Within

6 m (20 ft)

(RX-V781) (RX-V681)

30° 30°

En 6

FEATURES

What you can do with the unit

The unit is equipped with the various useful features.

Connecting various devices (p.32)

A number of HDMI jacks and various input/output jacks on

the unit allow you to connect video devices (such as BD/DVD

players), audio devices (such as CD players), game consoles,

camcorders, and other devices.

Playing back TV audio in surround

sound with a single HDMI cable

connection (Audio Return Channel:

ARC) (p.33)

When using an ARC-compatible TV, you only need one HDMI

cable to enable video output to the TV, audio input from the

TV, and the transmission of HDMI Control signals.

Various wireless connection

methods (p.53)

The unit supports the Wi-Fi feature that allows the unit to

connect to your wireless router (access point) without a

network cable connection. In addition, Wireless Direct

enables connecting a mobile device to the unit directly

without router.

Creating 3-dimensional sound fields

(p.65)

Connecting presence speakers allows you to create a natural

3-dimensional sound field in your own room (CINEMA DSP

3D). Even when no presence speakers are connected, the

Virtual Presence Speaker (VPS) function produces 3D

surround sound. In addition, the unit creates Virtual

Surround Back Speaker (VSBS) using the surround speakers

to add a sense of depth to the rear sound field even when no

surround back speakers are connected.

HDMI Control

TV audio

Video from

external device

Wi-Fi or

Wireless Direct

VSBS

En 7

Surround playback with 5 speakers

placed in front (p.67)

If you have surround speakers but there is no space to place

them in the rear of your room, you can place them in the

front and enjoy multichannel surround sound with the 5

speakers placed in the front (Virtual CINEMA FRONT).

Home Audio Network with

MusicCast (p.61)

The unit supports the MusicCast feature that allows you to

link a MusicCast compatible device to another device in a

different room and play them back simultaneously, or

control all MusicCast compatible devices with the dedicated

application “MusicCast CONTROLLER”.

Low power consumption (p.125)

The ECO mode (power saving function) reduces the unit’s

power consumption.

Useful applications

The following applications provide you the flexibility to control the unit or assist you with the cable connections.

⬛ AV CONTROLLER

“AV CONTROLLER” will turn your smartphone/tablet into a

Wi-Fi enabled remote control for your Yamaha network

products. This application provides you the flexibility to

control the available inputs, volume, mute, power

commands and playback source.

Functions

• Power on/off and volume adjustment

• Input, scene and sound mode selection

• DSP Parameter adjustment

• Playback control (including music selection for some

sources)

X

For details, search for “AV CONTROLLER” on the App Store or Google

Play.

⬛ AV SETUP GUIDE (for tablet)

“AV SETUP GUIDE” is an application that assists you with

cable connections between AV receiver and source devices

as well as AV receiver setup. This application guides you

through the various settings such as speaker connections,

TV and video/audio device connections and selecting the

speaker system.

Functions

• Connection guide (speakers, TV and video/audio devices)

• Setup guide (YPAO settings and various setup assistance

with illustrations)

• Viewing owner’s manual

X

For details, search for “AV SETUP GUIDE” on the App Store or Google

Play.

En 8

Part names and functions

This section explains the functions of the parts of the unit.

Front panel (RX-V781)

INFO (WPS)ZONE 2

ZONE CONTROL

MEMORY

PRESET

FM AM

TUNING

CONTROL

TV

BD

DVD

NET

RADIO

INPUT

SCENE

MAIN ZONE

PHONES

SILENT

CINEMA

(CONNECT)

STRAIGHT

PURE DIRECT

HDMI IN

5V 1A

VIDEO

VOLUME

AUX USB

TONE

PROGRAM

YPAO MIC

jilbcdefa gh k

m vponrstuq

En 9

a MAIN ZONE z key

Turns on/off (standby) the unit.

b Standby indicator

Lights up when the unit is in standby mode under any of the following conditions.

• HDMI Control is enabled (p.117)

• Standby Through is enabled (p.118)

• Network Standby is enabled (p.119)

c ZONE 2 key

Enables/disables the audio output to Zone2 (p.90).

d ZONE CONTROL key

Changes the zone (main zone or the Zone2) that is controlled by the keys and knobs on the front panel

(p.90).

e INFO (WPS) key

Selects the information displayed on the front display (p.96).

Enters the wireless network connection setup (WPS push button configuration) by holding down for 3

seconds (p.55).

f MEMORY key

Registers FM/AM radio stations as preset stations (p.71).

g PRESET keys

Select a preset FM/AM radio station (p.71).

h FM and AM keys

Switch between FM and AM (p.70).

i Front display

Displays information (p.12).

j Remote control sensor

Receives remote control signals (p.5).

k TUNING keys

Select the radio frequency (p.70).

l PURE DIRECT key

Enables/disables Pure Direct (p.69).

m INPUT knob

Selects an input source.

n PHONES jack

For connecting headphones.

o YPAO MIC jack

For connecting the supplied YPAO microphone (p.45).

p TONE CONTROL key

Adjusts the high-frequency range and low-frequency range of output sounds (p.98).

q SCENE keys

Select the registered input source, sound program, and various settings with one touch. Also, turns on

the unit when it is in standby mode (p.63).

r PROGRAM keys

Select a sound program or a surround decoder (p.64).

s STRAIGHT (CONNECT) key

Enables/disables the straight decode mode (p.68).

Enters MusicCast CONTROLLER registration by holding down for 5 seconds (p.61).

t VIDEO AUX (HDMI IN) jack

For connecting a device, such as a camcorder and a game console (p.38).

u USB jack

For connecting a USB storage device (p.76).

v VOLUME knob

Adjusts the volume.

En 10

Front panel (RX-V681)

INFO (WPS)ZONE 2

ZONE CONTROL

MEMORY

PRESET

FM AM

TUNING

CONTROL

TV

BD

DVD

NET

RADIO

SCENE

MAIN ZONE

PHONES

SILENT

CINEMA

STRAIGHT

PURE DIRECT

VIDEO

VOLUME

AUX USB

TONE

PROGRAM

YPAO MIC

INPUT

HDMI IN

5V 1A

(CONNECT)

ek mc dfgha b ij

n vpr st uoq

l

En 11

a MAIN ZONE z key

Turns on/off (standby) the unit.

b Standby indicator

Lights up when the unit is in standby mode under any of the following conditions.

• HDMI Control is enabled (p.117)

• Standby Through is enabled (p.118)

• Network Standby is enabled (p.119)

c YPAO MIC jack

For connecting the supplied YPAO microphone (p.45).

d ZONE 2 key

Enables/disables the audio output to Zone2 (p.90).

e Remote control sensor

Receives remote control signals (p.5).

f ZONE CONTROL key

Changes the zone (main zone or the Zone2) that is controlled by the keys and knobs on the front panel

(p.90).

g INFO (WPS) key

Selects the information displayed on the front display (p.96).

Enters the wireless network connection setup (WPS push button configuration) by holding down for 3

seconds (p.55).

h MEMORY key

Registers FM/AM radio stations as preset stations (p.71).

i PRESET keys

Select a preset FM/AM radio station (p.71).

j FM and AM keys

Switch between FM and AM (p.70).

k Front display

Displays information (p.12).

l TUNING keys

Select the radio frequency (p.70).

m PURE DIRECT key

Enables/disables Pure Direct (p.69).

n PHONES jack

For connecting headphones.

o INPUT keys

Select an input source.

p TONE CONTROL key

Adjusts the high-frequency range and low-frequency range of output sounds (p.98).

q SCENE keys

Select the registered input source, sound program, and various settings with one touch. Also, turns on

the unit when it is in standby mode (p.63).

r PROGRAM keys

Select a sound program or a surround decoder (p.64).

s STRAIGHT (CONNECT) key

Enables/disables the straight decode mode (p.68).

Enters MusicCast CONTROLLER registration by holding down for 5 seconds (p.61).

t VIDEO AUX (HDMI IN) jack

For connecting a device, such as a camcorder and a game console (p.38).

u USB jack

For connecting a USB storage device (p.76).

v VOLUME knob

Adjusts the volume.

En 12

Front display (indicators)

a ECO

Lights up when the unit is in the eco mode (p.125).

b HDMI

Lights up when HDMI signals are being input or output.

OUT1/OUT2 (RX-V781 only)

Indicates the HDMI OUT jacks currently outputting an HDMI signal.

OUT (RX-V681 only)

Lights up when HDMI signals are being output.

c ENHANCER

Lights up when Compressed Music Enhancer (p.69) is working.

d CINEMA DSP

Lights up when CINEMA DSP or CINEMA DSP 3D (p.65) is working.

e STEREO

Lights up when the unit is receiving a stereo FM radio signal.

TUNED

Lights up when the unit is receiving an FM/AM radio station signal.

f Signal strength indicator

Indicates the strength of the wireless network signal (p.53).

g Bluetooth indicator

Lights up when the unit is connecting to a Bluetooth device (p.74).

h PARTY

Lights up when the unit is in the party mode (p.91).

i SLEEP

Lights up when the sleep timer is on.

j ZONE2

Lights up when audio output to Zone2 is enabled (p.90).

k MUTE

Blinks when audio is temporarily muted.

l Volume indicator

Indicates the current volume.

m VIRTUAL

Lights up when the Virtual Presence Speaker (VPS) or Virtual

Surround Back Speaker (VSBS) (p.65), or the virtual surround

processing (p.67) is working.

n Cursor indicators

Indicate the remote control cursor keys currently operational.

o Information display

Displays the current status (such as input name and sound mode

name). You can switch the information by pressing INFO (p.96).

p ADAPTIVE DRC

Lights up when Adaptive DRC (p.98) is working.

q Speaker indicators

Indicate speaker terminals from which signals are output.

A Front speaker (L)

S Front speaker (R)

D Center speaker

F Surround speaker (L)

G Surround speaker (R)

H Surround back speaker (L)

J Surround back speaker (R)

K Surround back speaker

B Presence speaker (L)

N Presence speaker (R)

L Subwoofer

L C R

FPRFPL

SL

SBL SBRSB

SW

SR

VOL.

MUTE

ADAPTIVE DRC VIRTUAL

ENHANCER

TUNEDSTEREO

2

SLEEP

PART Y

ZONE

OUT 1

2

b

m

cd hg i k

a

jfle

n no p q

En 13

Rear panel (RX-V781)

* The area around the video/audio output jacks is marked in white on the actual product to prevent improper

connections.

AUDIO 1

AUDIO 2

OPTICAL

COAXIAL

VIDEO

AV4

AV3

AV2

AV 1

(TV)

P

B

Y

P

R

COMPONENT

VIDEO

MONITOR OUT

P

B

Y

P

R

HDMI 1

(

BD/DVD

)

HDMI 2 HDMI 3

HDMI 4

HDMI 5

HDCP2.2 HDCP2.2 HDCP2.2

12

ARC

ANTENNA

FM

AM

SURROUND CENTER

CLASS 2 WIRING CABLAGE CLASSE 2

FRONT

SINGLE

SPEAKERS

AV 5

VIDEO

AV 6

ZONE OUT

SUBWOOFER

SUR. BACK SURROUND

PRE OUT

CENTER FRONT

SINGLE

ZONE 2

NETWORK

TRIGGER OUT

REMOTE

(

NET

)

12V

IN

OUT

0.1A

COMPONENT VIDEO

1

2

HDMI

OUT

(

RADIO

)

WIRELESS

HDCP2.2

SURROUND BACK

ZONE2/BI-AMP

F.PRESENCE/ZONE2

EXTRA SP1

EXTRA SP2

PHONO

GND

b

l p

h

n

ea c g

k

i j

m

f

d

o

En 14

a REMOTE IN/OUT jacks

For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other

devices from another room (p.89).

b TRIGGER OUT jack

For connecting to a device that supports the trigger function (p.41).

c HDMI OUT 1-2 jacks

For connecting to HDMI-compatible TVs and outputting video/audio signals (p.33). When using ARC, TV

audio signal can also be input through the HDMI OUT 1 jack.

d ANTENNA jacks

For connecting to FM and AM antennas (p.39).

e HDMI 1-5 jacks

For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.35).

f Wireless antenna

For connecting to a network device wirelessly (p.53).

g NETWORK jack

For connecting to a network with a network cable (p.40).

h SPEAKERS terminals

For connecting to speakers (p.19).

i VOLTAGE SELECTOR

(Taiwan, Brazil and General models only)

Selects the switch position according to your local voltage (p.42).

j Power cable

For connecting to an AC wall outlet (p.42).

k PHONO jacks

For connecting to a turntable (p.38).

l AUDIO 1-2 jacks

For connecting to audio playback devices and inputting audio signals (p.38).

m AV 1-6 jacks

For connecting to video/audio playback devices and inputting video/audio signals (p.35).

n ZONE2 OUT jacks

For connecting to the external amplifier used in Zone2 and for outputting audio (p.88).

o MONITOR OUT jacks

COMPONENT VIDEO jacks

For connecting to a TV that supports component video and outputting video signals (p.34).

VIDEO jack

For connecting to a TV that supports composite video and outputting video signals (p.34).

p PRE OUT jacks

For connecting to a subwoofer with built-in amplifier or to an external power amplifier (p.41).

En 15

Rear panel (RX-V681)

* The area around the video/audio output jacks is marked in white on the actual product to prevent improper

connections.

PHONO

GND

AUDIO 1

AUDIO 2

OPTICAL

COAXIAL

VIDEO

AV4

AV3

AV2

AV 1

(TV)

PB

Y

P

R

COMPONENT

VIDEO

MONITOR OUT

PB

Y

P

R

HDMI 1

(

BD/DVD

)

HDMI 2 HDMI 3

HDMI 4

HDMI 5

HDCP2.2 HDCP2.2 HDCP2.2

ARC

ANTENNA

FM

AM

SURROUND CENTER

CLASS 2 WIRING CABLAGE CLASSE 2

FRONT

SINGLE

SPEAKERS

AV 5

VIDEO

AV 6

ZONE OUT

SUBWOOFER

PRE OUT

ZONE 2

NETWORK

TRIGGER OUT

REMOTE

(

NET

)

12V

IN

OUT

0.1A

COMPONENT VIDEO

1

2

HDMI

OUT

(

RADIO

)

WIRELESS

F.PRESENCE/ZONE2

EXTRA SP1

HDCP2.2

SURROUND BACK

ZONE2/BI-AMP

EXTRA SP2

b

pl

h

n

ea c g

i j

m

d f

ok

En 16

a REMOTE IN/OUT jacks

For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other

devices from another room (p.89).

b TRIGGER OUT jack

For connecting to a device that supports the trigger function (p.41).

c HDMI OUT jack

For connecting to an HDMI-compatible TV and outputting video/audio signals (p.33). When using ARC, TV

audio signal can also be input through the HDMI OUT jack.

d ANTENNA jacks

For connecting to FM and AM antennas (p.39).

e HDMI 1-5 jacks

For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.35).

f Wireless antenna

For connecting to a network device wirelessly (p.53).

g NETWORK jack

For connecting to a network with a network cable (p.40).

h SPEAKERS terminals

For connecting to speakers (p.19).

i VOLTAGE SELECTOR

(Taiwan, Brazil and General models only)

Selects the switch position according to your local voltage (p.42).

j Power cable

For connecting to an AC wall outlet (p.42).

k PHONO jacks

For connecting to a turntable (p.38).

l AUDIO 1-2 jacks

For connecting to audio playback devices and inputting audio signals (p.38).

m AV 1-6 jacks

For connecting to video/audio playback devices and inputting video/audio signals (p.35).

n ZONE2 OUT jacks

For connecting to the external amplifier used in Zone2 and for outputting audio (p.88).

o MONITOR OUT jacks

COMPONENT VIDEO jacks

For connecting to a TV that supports component video and outputting video signals (p.34).

VIDEO jack

For connecting to a TV that supports composite video and outputting video signals (p.34).

p SUBWOOFER PRE OUT 1-2 jacks

For connecting to a subwoofer with built-in amplifier (p.41).

En 17

Remote control

a Remote control signal transmitter

Transmits infrared signals.

b z (receiver power) key

Turns on/off (standby) the unit.

c Input selection keys

Select an input source for playback.

HDMI 1-5: HDMI 1-5 jacks

V-AUX: VIDEO AUX jack (on the front panel)

AV 1-6: AV 1-6 jacks

AUDIO: AUDIO 1-2 jacks (press repeatedly to select “AUDIO1” or

“AUDIO2”)

TUNER: FM/AM radio

BLUETOOTH: Bluetooth connection (the unit as a Bluetooth

receiver)

USB: USB jack (on the front panel)

NET: NETWORK sources (press repeatedly to select a desired

network source)

PHONO: PHONO jacks

d MAIN/ZONE2 switch

Changes the zone (main zone or Zone2) that is controlled by the

remote control (p.90).

e SCENE keys

Select the registered input source, sound program, and various

settings with one touch. Also, turns on the unit when it is in

standby mode (p.63).

f PROGRAM keys

Select a sound program (p.64).

g External device operation keys

Displays menus for the HDMI Control-compatible playback device

(p.147).

h ON SCREEN key

Displays the on-screen menu on the TV.

i Menu operation keys

Cursor keys: Select a menu or the parameter.

ENTER: Confirms a selected item.

RETURN: Returns to the previous screen.

j Radio keys

Operate the FM/AM radio when “TUNER” is selected as the input

source (p.70).

BAND: Switches between FM and AM radio.

PRESET: Select a preset station.

TUNING: Select the radio frequency.

External device operation keys

Let you perform playback operations when “USB” or “NET” is

selected as the input source, or control playback of the HDMI

Control-compatible playback device (p.147).

k Sound mode keys

Select a sound mode (p.64).

l INFO key

Selects the information displayed on the front display (p.96).

m SLEEP key

Pressing this key repeatedly will specify the time (120 min, 90 min,

60 min, 30 min, off), in which the unit switches to the standby

mode.

n Numeric keys

Let you enter numerical values, such as radio frequencies.

MEMORY key

Registers FM/AM radio stations as presets (p.71).

o HDMI OUT key

(RX-V781): Selects HDMI OUT jacks to be used for video/audio

output (p.62).

(RX-V681): Enables/disables video/audio output from the HDMI

OUT jack (p.62).

p PARTY key

Turns on/off the party mode (p.91).

q VOLUME keys

Adjust the volume.

r MUTE key

Mutes the audio output.

s OPTION key

Displays the option menu (p.97).

t DISPLAY key

Displays status information on the TV (p.97).

p

r

o

s

t

a

c

b

e

d

f

q

g

n

m

h

j

k

l

i

En 18

PREPARATIONS

General setup procedure

1 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.19)

2 Connecting a TV and playback devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.32)

3 Connecting the FM/AM antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.39)

4 Connecting a network cable or preparing the wireless antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.40)

5 Connecting other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.41)

6 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.42)

7 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.43)

8 Configuring the necessary speaker settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.44)

9 Optimizing the speaker settings automatically (YPAO). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.45)

10 Connecting to a network device wirelessly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.53)

11 Connecting to the MusicCast network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.61)

This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!

En 19

1 Connecting speakers

The unit has 7 built-in amplifiers. You can connect 2 to 9 speakers and up to 2 subwoofers to create the favorite acoustic space in your room.

You can also apply bi-amp connections or multi-zone configurations to enhance your system (p.27).

Ideal speaker layout Functions of each speaker

X

• We recommend using front presence speakers to have a full effect of the 3-dimensional sound fields. However,

the unit creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce

3-dimensional sound fields even when no front presence speakers are connected (p.65).

• Use “Ideal speaker layout” (diagram on the left) as reference. You do not need to exactly adjust the speaker

layout to this diagram since the YPAO function of the unit will automatically optimize the speaker settings (such

as distances) to suit the speaker layout.

• When using only one surround back speaker, place it straight behind the listening position (middle of “SBL”

and “SBR” in the diagram).

Caution

• Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers.

For details, see “Setting the speaker impedance” (p.23).

E

12

3

9

4

67

5

9

R

0.3 m (1 ft) or more

1.8 m

(5.9 ft)

0.5 to 1 m

(1.6 to 3.3 ft)

1.8 m

(5.9 ft)

0.5 to 1 m

(1.6 to 3.3 ft)

10°~30°10°~30°

Speaker type Function

Front (L/R)

12

Produce front left/right channel sounds (stereo sounds).

Center

3

Produces center channel sounds (such as movie dialogues and vocals).

Surround (L/R)

45

Produce surround left/right channel sounds. Surround speakers also

produce surround back channel sounds when no surround back

speakers are connected.

Surround back (L/R)

67

Produce surround back left/right channel sounds.

Front presence (L/R)

ER

Produce CINEMA DSP effect sounds or heights channel sounds of Dolby

Atmos and DTS:X contents.

Subwoofer

9

Produces LFE (low-frequency effect) channel sounds and reinforces

bass parts of other channels.

This channel is counted as “0.1”. You can connect 2 subwoofers to the

unit and place them on the left/right (or front/rear) sides of the room.

En 20

Basic speaker configuration

If you do not apply bi-amp connections or multi-zone configurations, follow the procedure below to place the speakers in your room and connect them to the unit.

⬛ Placing speakers in your room

Depending on the number of speakers, place the speakers and subwoofer in your room. This

section describes the representative speaker layout examples.

X

• To have a full effect of Dolby Atmos contents, we recommend using a speaker system with a ★ mark. However,

you can also play back Dolby Atmos contents with the 7.1 system (using surround back speakers).

• To have a full effect of DTS:X contents, we recommend using a speaker system with a ★ mark.

• (About the number of channels) For example, “5.1.2” denotes “standard 5.1-channel plus 2 for overhead

speaker channels”. For details on how to place overhead speakers (presence speakers), see “Presence speaker

layout” (p.22).

7.1/5.1.2 system [★]

(using both surround back and front presence speakers)

This speaker system brings out the full performance of the unit and allows you to enjoy a

highly-natural 3-dimensional sound field with any contents.

X

• The surround back speakers and presence speakers do not produce sounds simultaneously. The unit

automatically changes the speakers to be used, depending on the input signal and CINEMA DSP (p.65).

• When using front presence speakers installed to the ceiling or when using the Dolby Enabled speakers as the

presence speakers, configure the “Layout (Front Presence)” setting in the “Setup” menu before performing

YPAO (p.44).

5.1.2 system [★] (using front presence speakers)

This speaker system uses the front presence speakers to produce a natural 3-dimensional

sound field, and also creates Virtual Surround Back Speaker (VSBS) using the surround

speakers to add a sense of depth to the rear sound field. This system is suited for enjoying not

only 5.1-channel but also for 7.1-channel contents.

X

When using front presence speakers installed to the ceiling or when using the Dolby Enabled speakers as the

presence speakers, configure the “Layout (Front Presence)” setting in the “Setup” menu before performing YPAO

(p.44).

45

1

2

39

ER

Sayfa yükleniyor ...

Yamaha RX-V781 El kitabı

Bu kılavuz için de uygundur

Yamaha RX-V781 El kitabı

Diğer dillerde

İlgili Makaleler

Diğer Belgeler