Philips S9511/31 El kitabı

S95xx/S93xx

1

1 2 3

2

1

2

3

1 2

3

4 5

1

2

3

4

5

1 2

3

4

3

8

1

2

1

4

2

5

6 7

8 9 10

4 5

6

2 31

7

S95XX, S93XX

ENGLISH 12

ESPAÑOL 38

FRANÇAIS 66

ITALIANO 93

PORTUGUÊS 121

PORTUGUÊS DO BRASIL 150

TÜRKÇE 176

12

Introduction

Congratulations on your purchase and welcome

to Philips! To fully benet from the support that

Philips offers, register your product at

www.philips.com/welcome.

Please read this user manual, as it contains information

about the features of this shaver as well as some tips

to make shaving easier and more enjoyable.

General description (Fig. 1)

1 Comb for beard styler attachment

2 Click-on beard styler attachment

3 Click-on trimmer attachment

4 Click-on shaving unit

5 On/off button

6 Socket for small plug

7 Exclamation mark

8 Replacement reminder

9 Battery charge indicator

10 Travel lock symbol

11 Cleaning reminder

12 Personal settings

13 + and - buttons for personal settings

14 Replacement symbol

15 SmartClean system

16 Cap of SmartClean system

17 On/off button

18 Cleaning symbol

19 Drying symbol

20 Ready symbol

21 Charge symbol

22 Cleaning cartridge for SmartClean system

23 Adapter

24 Small plug

25 Retaining ring holder

26 Pouch

ENGLISH

Important

Read this user manual carefully before you use

the shaver and the SmartClean system. Save this

user manual for future reference.

Danger

- Keep the adapter dry.

Warning

- The adapter contains a transformer. Do not cut

off the adapter to replace it with another plug,

as this causes a hazardous situation.

- The shaver and the SmartClean system are not

intended for use by persons (including children)

with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of these appliances

by a person responsible for their safety.

- Children should be supervised to ensure that

they do not play with the shaver and the

SmartClean system.

- Always unplug the shaver before you clean

it under the tap.

Caution

- Never immerse the SmartClean system in

water nor rinse it under the tap.

- Never use water hotter than 80°C to rinse the shaver.

- Do not use the shaver, SmartClean system,

adapter or any other part if it is damaged, as

this may cause injury. Always replace a damaged

adapter or part with one of the original type.

- Only use the SmartClean system with the original

cleaning cartridge.

- Always place the SmartClean system on a stable,

level and horizontal surface to prevent leakage.

ENGLISH 13

- Always make sure that the cartridge compartment

is closed before you use the SmartClean system

to clean or charge the shaver.

- When the SmartClean system is ready for use, do

not move it to prevent leakage of cleaning uid.

- The SmartClean system thoroughly cleans but

does not disinfect your shaver, therefore do not

share the shaver with others.

- Never use compressed air, scouring pads, abrasive

cleaning agents or aggressive liquids such as petrol

or acetone to clean the appliance.

- Water may leak from the socket at the bottom

of the shaver when you rinse it. This is normal

and not dangerous because all electronics are

enclosed in a sealed power unit inside the shaver.

Compliance with standards

- This shaver is waterproof and complies with the

internationally approved safety regulations. It is

suitable for use in the bath or shower and for

cleaning under the tap. For safety reasons, the

shaver can therefore only be used cordlessly.

- The shaver and the SmartClean system comply

with all applicable standards and regulations

regarding exposure to electromagnetic elds.

General

- The adapter is equipped with an automatic

voltage selector and is suitable for mains voltages

ranging from 100 to 240 volts.

- The adapter transforms 100-240 volts to a safe

low voltage of less than 24 volts.

- Maximum noise level: Lc = 69dB(A)

ENGLISH14

The display

Note: Before you use the shaver for the rst time,

remove the protective foil from the display.

The various shaver types have different displays,

which are shown in the gures below.

- S95XX/S93XX

Personal settings

The appliance has a feature that allows you to

personalise your settings. You can choose between

three settings depending on your personal shaving

needs: comfort, dynamic or efciency.

- When you press the - or + buttons, the bar lights

up white continuously.

Charging

- Charging takes approx. 1 hour.

Note: This appliance can only be used cordlessly.

- When the shaver is connected to the mains, you

hear a sound. First the bottom light ashes white

then lights up white continuously. Then the second

light ashes and then lights up continuously, and

so on until the shaver is fully charged.

- Quick charge: When the bottom light stops

ashing and lights up continuously, the shaver

contains enough charge for one shave.

Battery fully charged

Note: This appliance can only be used cordlessly.

Note: When the battery is full, the display switches

off automatically after 30 minutes. When you press

the on/off button during or after charging, you hear a

sound to indicate that the shaver is still connected to

the mains.

ENGLISH 15

- When the battery is fully charged, all lights

of the battery charge indicator light up white

continuously.

Battery low

- When the battery is almost empty, the bottom

light ashes orange and you hear a sound.

Remaining battery capacity

- The remaining battery capacity is indicated by the

lights of the battery charge indicator that light up

continuously.

Cleaning reminder

For optimal shaving performance, we advise you to

clean the shaver after every use.

- When you switch off the shaver, the cleaning

reminder ashes to remind you to clean the

shaver.

Travel lock

You can lock the shaver when you are going to

travel. The travel lock prevents the shaver from being

switched on by accident.

ENGLISH16

Activating the travel lock

1 Press the on/off button for 3 seconds to enter

the travel lock mode.

, While you activate the travel lock, the travel lock

symbol lights up white continuously. When the

travel lock is activated, the shaver produces a

sound and the travel lock symbol ashes.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

, The travel lock symbol ashes and then lights

up continuously.

The shaver is now ready for use again.

Note: You can also deactivate the travel lock by

connecting the appliance to the mains.

Replacing shaving heads

For maximum shaving performance, we advise you

to replace the shaving heads every two years.

- The appliance is equipped with a replacement

reminder which reminds you to replace the

shaving heads. The replacement reminder lights

up white continuously and the arrows ash white.

You hear a beep to indicate you have to replace

the shaving heads.

Note: After replacing the shaving heads, you need

to reset the shaver by pressing the on/off button for

7 seconds.

ENGLISH 17

Exclamation mark

Blocked shaving heads

- If the shaving heads are blocked, the exclamation

mark lights up orange continuously. The

replacement reminder and the cleaning reminder

ash white alternately and you hear a sound. In

this case, the motor cannot run because the

shaving heads are soiled or damaged.

- When this happens, you have to clean the shaving

heads or replace them.

Overheating

- If the appliance overheats during charging, the

exclamation mark ashes orange.

- When this happens, the shaver automatically

switches off. Charging continues once the

appliance is back to the normal temperature.

Charging

Charging takes approx. 1 hour.

A fully charged shaver has a shaving time of up to

50 minutes.

Note: You cannot use the appliance while charging.

Charge the shaver before you use it for the rst

time and when the display indicates that the battery

is almost empty .

Charging with the adapter

1 Make sure the appliance is switched off.

ENGLISH18

2 Insert the small plug into the appliance (1) and

put the adapter in the wall socket (2).

Charging in the SmartClean system

1 Put the small plug in the SmartClean system.

2 Put the adapter in the wall socket.

3 Hold the shaver upside down above the holder.

Make sure the front of the shaver points

towards the SmartClean system.

4 Place the shaver in the holder (1), tilt the

shaver backwards (2) and press down the top

cap to connect the shaver (‘click’) (3).

Note: The battery symbol lights up to indicate the

appliance is charging.

Using the shaver

Shaving

Skin adaptation period

Your rst shaves may not bring you the result you

expect and your skin may even become slightly

irritated. This is normal. Your skin and beard need

time to adapt to any new shaving system.

We advise you to shave regularly (at least 3 times

a week) with this shaver for a period of 3 weeks to

allow your skin to adapt to the new shaver.

ENGLISH 19

Tip: To ensure the best result, we advise you to pre-trim

your beard if you have not shaved for 3 days or longer.

Note: This appliance can only be used cordlessly.

1 Press the on/off button once to switch on

the shaver.

Tip: Select your personal settings (see chapter

‘The display’).

, The display lights up for a few seconds.

2 Move the shaving heads over your skin

in circular movements.

- Do not make straight movements.

3 Press the on/off button once to switch off

the shaver.

, The display lights up for a few seconds and then

shows the remaining battery charge.

Wet shaving

You can also use this shaver on a wet face with

shaving foam or shaving gel.

To shave with shaving foam or shaving gel, follow

the steps below:

1 Apply some water to your skin.

2 Apply shaving foam or shaving gel to your skin.

3 Rinse the shaving unit under the tap to ensure

that the shaving unit glides smoothly over your

skin.

4 Press the on/off button once to switch on the

shaver.

ENGLISH20

Sayfa yükleniyor ...

Philips S9511/31 El kitabı

Philips S9511/31 El kitabı

Diğer dillerde

İlgili Makaleler

Diğer Belgeler