LG OLED55C9PLA El kitabı

www.lg.com

*MFL71140305*

(2012-REV03)

Please read this manual carefully before operating

your set and retain it for future reference.

OWNER’S MANUAL

Safety and Reference

2

ENGLISH

Warning! Safety

Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user

to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sucient

magnitude to constitute a risk of electric

shock to persons.

This symbol is intended to alert the

user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying

the appliance.

WARNING : TO REDUCE THE RISK OF FIRE

AND ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

• TO PREVENT THE SPREAD OF FIRE, KEEP

CANDLES OR OTHER ITEMS WITH OPEN

FLAMES AWAY FROM THIS PRODUCT AT ALL

TIMES.

• Do not place the TV and/or remote

control in the following environments:

- Keep the product away from direct

sunlight.

- An area with high humidity such as a

bathroom

- Near any heat source such as stoves and

other devices that produce heat.

- Near kitchen counters or humidiers

where they can easily be exposed to steam

or oil.

- An area exposed to rain or wind.

- Do not expose to dripping or splashing and

do not place objects lled with liquids,

such as vases, cups, etc. on or over the

apparatus (e.g., on shelves above the unit).

- Near ammable objects such as gasoline

or candles, or expose the TV to direct air

conditioning.

- Do not install in excessively dusty places.

Otherwise, this may result in re, electric

shock, combustion/explosion, malfunction

or product deformation.

3

ENGLISH

• Ventilation

- Install your TV where there is proper

ventilation. Do not install in a conned

space such as a bookcase.

- Do not install the product on a carpet or

cushion.

- Do not block or cover the product with

cloth or other materials while unit is

plugged in.

• Take care not to touch the ventilation

openings. When watching the TV for a

long period, the ventilation openings may

become hot.

• Protect the power cord from physical or

mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall

outlets, and the point where the cord exits

the device.

• Do not move the TV whilst the Power cord is

plugged in.

• Do not use a damaged or loosely tting

power cord.

• Be sure do grasp the plug when unplugging

the power cord. Do not pull on the power

cord to unplug the TV.

• Do not connect too many devices to the

same AC power outlet as this could result in

re or electric shock.

• Disconnecting the Device from the

Main Power

- The power plug is the disconnecting

device. In case of an emergency, the power

plug must remain readily accessible.

• Do not let your children climb or cling onto

the TV. Otherwise, the TV may fall over,

which may cause serious injury.

• Outdoor Antenna Grounding (Can dier

by country):

- If an outdoor antenna is installed, follow

the precautions below. An outdoor

antenna system should not be located in

the vicinity of overhead power lines or

other electric light or power circuits, or

where it can come in contact with such

power lines or circuits as death or serious

injury can occur.

Be sure the antenna system is grounded to

provide some protection against voltage

surges and built-up static charges. Section

810 of the National Electrical Code (NEC)

in the U.S.A. provides information with

respect to proper grounding of the mast

and supporting structure, grounding of the

lead-in wire to an antenna discharge unit,

size of grounding conductors, location

of antenna discharge unit, connection to

grounding electrodes and requirements

for the grounding electrode. Antenna

grounding according to the National

Electrical Code, ANSI/NFPA 70

4

ENGLISH

• Grounding (Except for devices which are

not grounded.)

- TV with a three-prong grounded AC plug

must be connected to a three-prong

grounded AC outlet. Ensure that you

connect the earth ground wire to prevent

possible electric shock.

• Never touch this apparatus or antenna

during a lightning storm. You may be

electrocuted.

• Make sure the power cord is connected

securely to the TV and wall socket if not

secured damage to the Plug and socket may

occur and in extreme cases a re may break

out.

• Do not insert metallic or inammable

objects into the product. If a foreign object is

dropped into the product, unplug the power

cord and contact the customer service.

• Do not touch the end of the power

cord while it is plugged in. You may be

electrocuted.

• If any of the following occur, unplug

the product immediately and contact

your local customer service.

- The product has been damaged.

- If water or another substance enters the

product (like an AC adapter, power cord,

or TV).

- If you smell smoke or other odors coming

from the TV

- When lightning storms or when unused for

long periods of time.

Even the TV is turned o by remote control

or button, AC power source is connected to

the unit if not unplugged in.

• Do not use high voltage electrical equipment

near the TV (e.g., a bug zapper). This may

result in product malfunction.

• Do not attempt to modify this product in

any way without written authorization from

LG Electronics. Accidental re or electric

shock can occur. Contact your local customer

service for service or repair. Unauthorized

modication could void the user’s authority

to operate this product.

5

ENGLISH

• Use only an authorized attachments /

accessories approved by LG Electronics.

Otherwise, this may result in re, electric

shock, malfunction, or product damage.

• Never disassemble the AC adapter or power

cord. This may result in re or electric shock.

• Handle the adapter carefully to avoid

dropping or striking it. An impact could

damage the adapter.

• To reduce the risk of re or electrical shock,

do not touch the TV with wet hands. If the

power cord prongs are wet or covered with

dust, dry the power plug completely or wipe

dust o.

• Batteries

- Store the accessories (battery, etc.) in a

safe location out of the reach of children.

- Do not short circuit, disassemble, or allow

the batteries to overheat. Do not dispose of

batteries in a re. Batteries should not be

exposed to excessive heat.

- Caution: Risk of re or explosion if the

battery is replaced by an incorrect type.

• Moving

- When moving, make sure the product

is turned o, unplugged, and all cables

have been removed. It may take 2 or more

people to carry larger TVs. Do not press

or put stress on the front panel of the

TV. Otherwise, this may result in product

damage, re hazard or injury.

• Keep the packing anti-moisture material or

vinyl packing out of the reach of children.

• Do not allow an impact shock, any objects

to fall into the product, and do not drop

anything onto the screen.

• Do not press strongly upon the panel with

a hand or a sharp object such as a nail,

pencil, or pen, or make a scratch on it. It may

causedamage to screen.

• Cleaning

- When cleaning, unplug the power cord

and wipe gently with a soft/dry cloth. Do

not spray water or other liquids directly

on the TV. Do not clean your TV with

chemicals including glass cleaner, any type

of air freshener, insecticide, lubricants,

wax (car, industrial), abrasive, thinner,

benzene, alcohol etc., which can damage

the product and/or its panel. Otherwise,

this may result in electric shock or product

damage.

6

ENGLISH

Preparing

• If the TV is turned on for the rst time after it

was shipped from the factory, initialization

of the TV may take a few minutes.

• Image shown may dier from your TV.

• Your TV’s OSD (On Screen Display) may dier

slightly from that shown in this manual.

• The available menus and options may dier

from the input source or product model that

you are using.

• New features may be added to this TV in the

future.

• The device must be easily accessed to a

location outlet near the access. Some devices

are not made by turning on / o button,

turning o the device and unplugging the

power cord.

• The items supplied with your product may

vary depending on the model.

• Product specications or contents of this

manual may be changed without prior

notice due to upgrade of product functions.

• For an optimal connection, HDMI cables

and USB devices should have bezels less

than 10 mm thick and 18 mm width. Use an

extension cable that supports if the

USB cable or USB memory stick does not t

into your TV’s USB port.

A

B

A

B

* A ≦ 10 mm

* B ≦ 18 mm

• Use a certied cable with the HDMI logo

attached.

• If you do not use a certied HDMI cable,

the screen may not display or a connection

error may occur. (Recommended HDMI Cable

Types)

- Ultra High Speed HDMI®/

TM

cable (3 m or

less)

Separate Purchase

Separate purchase items can be changed or

modied for quality improvement without any

notication. Contact your dealer to buy these

items. These devices only work with certain

models.

The model name or design may be changed

depending on the upgrade of product functions,

manufacturer’s circumstances or policies.

Magic Remote Control

AN-MR19BA

Check whether your TV model supports

Bluetooth in the Wireless Module Specication

to verify whether it can be used with the Magic

Remote.

7

ENGLISH

Wall Mounting Bracket

(Depending on model)

Make sure to use screws and wall mount

bracket that meet the VESA standard. Standard

dimensions for the wall mount kits are

described in the following table.

A

B

Model

OLED55/65B9*

OLED55/65C9*

OLED55/65E9*

OLED77B9*

OLED77C9*

VESA (A x B)

(mm)

300 x 200 400 x 200

Standard

screw

M6 M6

Number of

screws

4 4

Wall mount

bracket

OLW480B OLW480B

Lifting and moving

the TV

Please note the following advice to prevent the

TV from being scratched or damaged and for

safe transportation regardless of its type and

size.

• It is recommended to move the TV in the box

or packing material that the TV originally

came in.

• Before moving or lifting the TV, disconnect

the power cord and all cables.

• When holding the TV, the screen should face

away from you to avoid damage.

• Hold the side and bottom of the TV frame

rmly. Make sure not to hold the transparent

part, speaker, or speaker grill area. (Not

applicable for OLED55/65E9*)

8

ENGLISH

• When transporting a large TV, there should

be at least 2 people.

• When transporting the TV by hand, hold the

TV as shown in the following illustration.

(Only OLED55/65E9*)

• Hold the side of the TV with one hand, and

hold the bottom of the rear cover or the

side of the Stand with the other. (Hold the

rear cover when placing the TV on the oor.

Holding the bottom glass may result in

injury.) (Only OLED55/65E9*)

• When transporting the TV, do not expose the

TV to jolts or excessive vibration.

• When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt

towards the left or right.

• Do not apply excessive pressure to cause

exing / bending of frame chassis as it may

damage screen.

• When handling the TV, be careful not to

damage the protruding buttons.

• Avoid touching the screen at all

times, as this may result in damage to

the screen.

• When attaching the stand to the TV

set, place the screen facing down on

a cushioned table or at surface to

protect the screen from scratches.

• Do not scratch or hit the glass with

metal materials or objects. It may

damage the TV or lead to an accident.

(Only OLED55/65E9*)

Mounting on the

Table

1 Lift and tilt the TV into its upright position

on a table.

• Leave a 10 cm (minimum) space from the

wall for proper ventilation.

10 cm

(Depending on model)

2 Connect the power cord to a wall outlet.

9

ENGLISH

• Do not apply foreign substances (oils,

lubricants, etc.) to the screw parts

when assembling the product. (Doing

so may damage the product.)

• If you install the TV on a stand, you

need to take actions to prevent the

product from overturning. Otherwise,

the product may fall over, which may

cause injury.

• Do not use any unapproved items

to ensure the safety and product life

span.

• Any damage or injuries caused by

using unapproved items are not

covered by the warranty.

• Make sure that the screws are

inserted correctly and fastened

securely. (If they are not fastened

securely enough, the TV may tilt

forward after being installed.) Do not

use too much force and over tighten

the screws; otherwise screw may be

damaged and not tighten correctly.

Securing TV to the Wall

(Depending on model)

1 Insert and tighten the eye-bolts, or TV

brackets and bolts on the back of the TV.

• If there are bolts inserted at the eye-bolts

position, remove the bolts rst.

2 Mount the wall brackets with the bolts to

the wall. Match the location of the wall

bracket and the eye-bolts on the rear of the

TV.

3 Connect the eye-bolts and wall brackets

tightly with a sturdy rope. Make sure to keep

the rope horizontal with the at surface.

• Use a platform or cabinet that is strong and

large enough to support the TV securely.

• Brackets, bolts and ropes are not provided.

You can obtain additional accessories from

your local dealer.

10

ENGLISH

• Remove the stand before installing

the TV on a wall mount by performing

the stand attachment in reverse.

• For more information of screws

and wall mount bracket, refer to the

Separate purchase.

• If you intend to mount the product

to a wall, attach VESA standard

mounting interface (optional parts)

to the back of the product. When

you install the set to use the wall

mounting bracket (optional parts), x

it carefully so as not to drop.

• When mounting a TV on the wall,

make sure not to install the TV by

hanging the power and signal cables

on the back of the TV.

• Do not install this product on a wall

if it could be exposed to oil or oil mist.

This may damage the product and

cause it to fall.

Mounting to the Wall

Attach an optional wall mount bracket at the

rear of the TV carefully and install the wall

mount bracket on a solid wall perpendicular

to the oor. When you attach the TV to other

building materials, please contact qualied

personnel. LG recommends that wall mounting

be performed by a qualied professional

installer. We recommend the use of LG’s wall

mount bracket. LG’s wall mount bracket is

easy to move with cables connected. When

you do not use LG’s wall mount bracket, please

use a wall mount bracket where the device is

adequately secured to the wall with enough

space to allow connectivity to external devices.

It is advised to connect all the cables before

installing xed wall mounts.

10 cm

(Depending on model)

11

ENGLISH

• Please use the accessory cable

holder when hanging on the wall.

(Only OLED55/65C9*)

• Attach the three covers when

installing the wall mount. (Only

when the item is provided.) (Only

OLED55/65E9*)

Connections

Connect various external devices to the TV and

switch input modes to select an external device.

For more information of external device’s

connection, refer to the manual provided with

each device.

Antenna/Cable

Connect the TV to a wall antenna socket with an

RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal

amplier properly to improve the image

quality.

• If the image quality is poor with an antenna

connected, try to realign the antenna in the

correct direction.

• An antenna cable and converter are not

supplied.

• For a location that is not supported with

ULTRA HD broadcasting, this TV cannot

receive ULTRA HD broadcasts directly.

12

ENGLISH

Satellite dish

Connect the TV to a satellite dish to a satellite

socket with a satellite RF cable (75 Ω).

(Depending on model)

CI module

View the encrypted (pay) services in digital TV

mode. (Depending on model)

• Check if the CI module is inserted into the

PCMCIA card slot in the right direction. If

the module is not inserted properly, this can

cause damage to the TV and the PCMCIA

card slot.

• If the TV does not display any video and

audio when CI+ CAM is connected, please

contact to the Terrestrial/Cable/Satellite

Service Operator.

Other connections

Connect your TV to external devices. For the

best picture and audio quality, connect the

external device and the TV with the HDMI cable.

Some separate cable is not provided.

HDMI

• When connecting the HDMI cable, the

product and external devices should be

turned o and unplugged.

• Supported HDMI Audio format :

DTS (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz),

DTS HD (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,

176.4 kHz, 192 kHz),

True HD (48 kHz),

Dolby Digital / Dolby Digital Plus (32 kHz,

44.1 kHz, 48 kHz),

PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192

kHz)

(Depending on model)

• → ( ) → [Picture] → [Additional

Settings] → [HDMI ULTRA HD Deep Colour]

- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2,

4:2:0)

- O : Support 4K @ 50/60 Hz 8 bit (4:2:0)

If the device connected to Input Port also

supports ULTRA HD Deep Colour, your picture

may be clearer. However, if the device

doesn’t support it, it may not work properly.

In that case, change the TV’s [HDMI ULTRA

HD Deep Colour] setting to o.

13

ENGLISH

USB

Some USB Hubs may not work. If a USB device

connected using a USB Hub is not detected,

connect it to the USB port on the TV directly.

External Devices

Available external devices are: Blu-ray player,

HD receivers, DVD players, VCRs, audio systems,

USB storage devices, PC, gaming devices, and

other external devices.

• The external device connection may dier

from the model.

• Connect external devices to the TV regardless

of the order of the TV port.

• If you record a TV program on a Blu-ray/DVD

recorder or VCR, make sure to connect the TV

signal input cable to the TV through a DVD

recorder or VCR. For more information of

recording, refer to the manual provided with

the connected device.

• Refer to the external equipment’s manual

for operating instructions.

• If you connect a gaming device to the TV, use

the cable supplied with the gaming device.

• In PC mode, there may be noise associated

with the resolution, vertical pattern, contrast

or brightness. If noise is present, change the

PC output to another resolution, change the

refresh rate to another rate or adjust the

brightness and contrast on the [PICTURE]

menu until the picture is clear.

• In PC mode, some resolution settings

may not work properly depending on the

graphics card.

• If ULTRA HD content is played on your PC,

video or audio may become disrupted

intermittently depending on your PC’s

performance. (Depending on model)

• When connecting via a wired LAN, it is

recommended to use a CAT 7 cable. (Only

when port is provided.)

14

ENGLISH

Using Button

You can simply operate the TV functions, using

the button.

Basic functions

Power On (Press)

Power O

1

(Press and Hold)

Menu Control (Press

2

)

Menu Selection (Press and Hold

3

)

1 All running apps will close, and any

recording in progress will stop. (Depending

on country)

2 You can access and adjust the menu by

pressing the button when TV is on.

3 You can use the function when you access

menu control.

Power On (Press)

Power O

1

(Press and hold)

Volume Control

Programmes Control

1 All running apps will close, and any

recording in progress will stop. (Depending

on country)

15

ENGLISH

Adjusting the menu

When the TV is turned on, press the button

one time. You can adjust the Menu items using

the button.

Turns the power o.

Changes the input source.

Adjusts the volume level.

Scrolls through the saved programmes.

Turns the power o.

Accesses the settings menu.

Clears on-screen displays and returns to

TV viewing.

Changes the input source.

16

ENGLISH

Using Magic Remote

Control

The descriptions in this manual are based on

the buttons on the remote control. Please read

this manual carefully and use the TV correctly.

When the message [Magic Remote battery is

low. Please change the battery.] is displayed,

replace the battery.

To replace batteries, open the battery cover,

replace batteries (1.5 V AA) matching the

and ends to the label inside the

compartment, and close the battery cover. Be

sure to point the magic remote toward the

remote control sensor on the TV. To remove the

batteries, perform the installation actions in

reverse.

1 1

1

(Some buttons and services may not be

provided depending on models or regions.)

17

ENGLISH

To use the button, press and hold for

more than 1 second.

(POWER) Turns the TV on or o.

/ You can turn your set-top box on or

o by adding the set-top box to the universal

remote control for your TV.

Number buttons Enters numbers.

Accesses the [QUICK HELP].

(DASH) Inserts a between numbers such

as 2-1 and 2-2.

/ Accesses the saved programmes

list.

(More Actions) Displays more remote

control functions.

Edits QUICK ACCESS.

-QUICK ACCESS is a feature that allows you to

enter a specied app or Live TV directly by

pressing and holding the number buttons.

Audio descriptions function will be

enabled.

Adjusts the volume level.

(MUTE) Mutes all sounds.

(MUTE) Accesses the [Accessibility] menu.

Scrolls through the saved

programmes.

(Voice recognition) Network connection

is required to use the voice recognition

function. Once the voice display bar is

activated on the TV screen, press and hold the

button and speak your command out loud.

(HOME) Accesses the Home menu.

(HOME) Shows the previous history.

(Q. Settings) Accesses the Quick Settings.

(Q. Settings) Displays the [All Settings]

menu.

Wheel (OK) Press the center of button

to select a menu. You can change programmes

by using button.

(up/down/left/right) Press

the up, down, left or right button to scroll

the menu. If you press buttons

while the pointer is in use, the pointer will

disappear from the screen and Magic Remote

will operate like a general remote control. To

display the pointer on the screen again, shake

Magic Remote to the left and right.

/ Returns to the previous level.

/

Clears on-screen displays and

returns to last input viewing.

/ Shows programme guide.

1

Streaming Service buttons Connects to

the Video Streaming Service.

(INPUT) Changes the input source.

(INPUT) Accesses the [HOME

DASHBOARD].

Displays the set-top box Home menu.

-When you are not watching via a set-top

box: the display changes to the set-top box

screen.

, , , These access special

functions in some menus.

Runs the record function.

, (Control buttons) Controls media

contents.

18

ENGLISH

Registering Magic Remote

Control

How to register the Magic

Remote Control

To use the Magic Remote, rst pair it with your

TV.

1 Put batteries into the Magic Remote and

turn the TV on.

2 Point the Magic Remote at your TV and press

the Wheel (OK) on the remote control.

* If the TV fails to register the Magic Remote,

try again after turning the TV off and back

on.

How to deregister the Magic

Remote Control

Press the / and (HOME) buttons

at the same time, for ve seconds, to unpair the

Magic Remote with your TV.

* Pressing and holding the /

button will let you cancel and re-register

Magic Remote at once.

• It is recommended that an Access

Point (AP) be located more than 0.2 m

away from the TV. If the AP is installed

closer than 0.2 m, the Magic remote

control may not perform as expected

due to frequency interference.

• Do not mix new batteries with old

batteries. This may cause the batteries

to overheat and leak.

• Failure to match the correct polarities

of the battery may cause the battery

to burst or leak, resulting in re,

personal injury, or ambient pollution.

• This apparatus uses batteries. In

your community there might be

regulations that require you to

dispose of these batteries properly

due to environmental considerations.

Please contact your local authorities

for disposal or recycling information.

• Batteries inside or inside the product

shall not be exposed to excessive heat

such as sunshine, re or the like.

User Guide

For more information about this TV, read the

USER GUIDE embedded in the product.

• To open the USER GUIDE → ( )

→ [General] → [About This TV] → [User

Guide]

19

ENGLISH

Troubleshooting

Cannot control the TV with the remote control.

• Check the remote control sensor on the

product and try again.

• Check if there is any obstacle between the

product and the remote control.

• Check if the batteries are still working and

properly installed ( to , to ).

No image display and no sound is produced.

• Check if the product is turned on.

• Check if the power cord is connected to a

wall outlet.

• Check if there is a problem in the wall outlet

by connecting other products.

The TV turns o suddenly.

• Check the power control settings. The power

supply may be interrupted.

• Check if the auto-o function is activated on

the settings related time.

• If there is no signal while the TV is on, the TV

will turn o automatically after 15 minutes

of inactivity.

When connecting to the PC (HDMI), no signal is

detected.

• Turn the TV o/on using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

Abnormal Display

• If the product feels cold to the touch, there

may be a small “icker” when it is turned on.

This is normal, there is nothing wrong with

product.

• This panel is an advanced product that

contains millions of pixels. You may see

tiny black dots and/or brightly coloured

dots (white, red, blue or green) at a size of

1ppm on the panel. This does not indicate

a malfunction and does not aect the

performance and reliability of the product.

This phenomenon also occurs in third-party

products and is not subject to exchange or

refund.

• You may nd dierent brightness and colour

of the panel depending on your viewing

position(left/right/top/down).

This phenomenon occurs due to the

characteristic of the panel. It is not related

with the product performance, and it is not

malfunction.

20

ENGLISH

Generated Sound

• “Cracking” noise: A cracking noise that

occurs when watching or turning o the TV

is generated by plastic thermal contraction

due to temperature and humidity. This noise

is common for products where thermal

deformation is required.

• Electrical circuit humming/panel buzzing: A

low level noise is generated from a high-

speed switching circuit, which supplies

a large amount of current to operate a

product. It varies depending on the product.

This generated sound does not aect the

performance and reliability of the product.

• Make sure to wring any excess water

or cleaner from the cloth.

• Do not spray water or cleaner directly

onto the TV screen.

• Make sure to spray just enough of

water or cleaner onto a dry cloth to

wipe the screen.

Sayfa yükleniyor ...

LG OLED55C9PLA El kitabı

Bu kılavuz için de uygundur

LG OLED55C9PLA El kitabı

Diğer dillerde

İlgili Makaleler

Diğer Belgeler