SENAO SN-358 PLUS Kullanım kılavuzu

SN-358 SKYPE

SN-358 PLUS

RU

EPA

TR

This product is prohibited to be

used without permission from the

government authorities in the

relevant jurisdictions

http://www.gblmedia.com

6

Outdoor Antenna with cabl

e

(optional)

7

Hi-Power Battery

CD-ROM

(optional)

8

9

10

T

raveling Adaptps

(optional)

Before Initial Use

Please read IMPORTANT SAFETY INSTRUCTIONS on pages!54~55 before use.

Read and understand all instructions.

Accessories

1

Instruction manual

1book

2

AC adaptor for base unit

1pc

3

Telephone line

1pc

4

Telescopic antenna for base unit

1pc

5

Standard Battery

1pc

USB Cable

1 pc (For SN-358 SKYPE only)

* Thank you for purchasing this SN-358 SKYPE/SN-358 PLUS

cordless telephone, one of the high-quality products of SENAO.

* To obtain optimum performance, be sure to read this manual

carefully before starting operation and keep it for furure reference.

* SKYPE function only supported by SN-358 SKYPE.

(1)

(2)

(3) (4)

(5)

(8) (Optional)

(9) (Optional)

(10) (Optional)

(6) (7)

1

http://www.gblmedia.com

Raise the base unit antenna and

fully both the telescopic antenna of

base unit and handset.

Operating Distance/Noise

Calls are transmitted between the base unit and the handset using wireless radio

waves. For maximum distance and noise free operation, the recommended base

unit location is:

A

way from electronic

appliances such as a TV, PC o

r

another cordless phone.

In a HIGH and CENTRAL location

with no obstructions such as walls.

2

http://www.gblmedia.com

Contents

Before Initial Use..........................................................................................................

Accessories..................................................................................................................

Operating Distance/Noise ....................................................................................

Contents .......................................................................................................................

Features........................................................................................................................

Diagram ........................................................................................................................

Handset Diagram ..................................................................................................

Handset LCD Icon.................................................................................................

Base Unit Diagram................................................................................................

Installation....................................................................................................................

A. Base Unit...........................................................................................................

B. Handset.............................................................................................................

C. Optional Travel charger ...................................................................................

D. Optional Ear-microphone ................................................................................

E. Battery Charge................................................................................................

F. Installation of Outdoor Antenna....................................................................

Basic Operation for Base .........................................................................................

Handset Operation and Function ............................................................................

TALK Menu ................................................................................................................

INT Menu....................................................................................................................

Phone Book...............................................................................................................

Using the Menu .........................................................................................................

A. By scrolling....................................................................................................

B. By shortcut ....................................................................................................

Menu Functions..........................................................................................................

Operation for SKYPE.................................................................................................

Troubleshooting Guide.............................................................................................

Specification..............................................................................................................

Important Safety Instructions ..................................................................................

A. Installation.......................................................................................................

B. SKYPE operation..............................................................................................

C. Advance setup.................................................................................................

D. System requirement........................................................................................

25

29

31

32

33

35

37

43

47

48

52

54

55

3

http://www.gblmedia.com

Features

* Multi-handset system (up to 99)

* PC-based SKYPE function. (SN-358 SKYPE only)

* Vibration mode

* Selectable ring and page tone on handset (16 melodies) and base ring tone (10

melodies)

* Handset with scrolling keys

* Handset custom name edit

* Walkie-talkie between handsets

* Multi-language display

* Multi-channel with auto-scan

* Base speakerphone with dial keypad

* 50 phone book memory with name/number on each handset

* Last 10 calls redial on handset

* 30 caller id memory with time/date (FSK & DTMF type)

* Auto detection of FSK and DTMF caller id signal

* Caller id with call waiting (CIDCW)

* 20 memory dial on base unit

* Base unit with last number redial

* LCD and handset keypad with backlit

* Tone/Pulse dialing mode selectable

* Change channel during conversation

* Flash time programmable

* Ring volume adjustable for both handset and base

* Voice volume adjustable for both handset and base

* Handset with power saving function

* Low battery alert and display

* Built- in voice security circuit (Scrambler)

* Auto answer and auto hang up

* Transferring a call between handsets and base

* Out-of-range alert

* Battery charge indicator

* Fast charge

* Adjustable keypad volume on handset

* Talk-time display on handset

4

http://www.gblmedia.com

Diagram

Handset Diagram

Operation keys

: Talk / Flash key

: Intercom key

:

End key; Power On/Off; Back to

stand by mode from menu

Microphone

Dialing keys

Receiver

Display (LCD)

Left Soft Ke

y

Right Soft Key

Scrolling Keys

PTT key: Push To Talk

Ear- Microphone jack

Battery Pack Release Button

Battery Pack

Charge Contacts

SKYPE Key (Caller ID Key in SN-358PLUS)

Speakerphone

Travel Adaptor Jack

5

http://www.gblmedia.com

Base Unit Diagram

Tel jack

Line jack

USB jack

Antenna

DC IN jack

Handset LCD Icon

Signal strength: The more segments displayed in the bar graph, the better the

signal strength.

ID number of handset.

Battery strength: The more segments displayed in the bar graph, the greater

the battery charged, when battery low show up, the handset will alarm you

with “Bee Bo” sound.

Ringing mode.

Vibration mode.

6

http://www.gblmedia.com

FUNCTION KEYS:

TRANSSFER;

MEMORY; HOLD;

FLASH;REDIAL/P

VOLUME UP/DOWN

Speakerphone Button

Speaker

INDICATORS:

CALLER ID; POWER;

IN USE; SKYPE;MULTI-

TALK

INTERCOM

SKYPE

7

http://www.gblmedia.com

)4*

Installation

A. Base Unit

Please set up the base unit according to the following steps.

(1) Install the telescopic antenna of the

base unit and extend it fully and

vertically.

(2) Plug in the SENAO AC

adaptor to DC IN jack.

(2) (6) (5) (4)

(3) Plug the AC adaptor into

supporting wall outlet.

(4) Insert the included

telephone line into

the LINE jack and

also the telephone

line into a wall jack.

(5) A standard telephone

may also be plugged into

TEL jack.

(6) Plug USB cable with

your PC/NB for SKYPE

connection

NOTE: Please refer to P31 for SKYPE Installation.

8

http://www.gblmedia.com

B. Handset

To install battery pack:

First carefully slide the bottom battery pack tabs

into open slot at the back of the phone as shown in

Figure 1. The bottom of the battery pack should

lock into the back of the handset. Press down on

the top of the battery pack into the handset and you

should hear a “click” which signifies the battery

securing into place on the handset.

To remove the handset battery:

Turn the handset face down and locate the battery

release button at the middle of the handset.

Push the release button and lift the battery pack up

C. Optional Travel charger

Boasting an extremely light and function design, the optional

travel charger is designed for fast charging of your phone

battery quickly. Plus the charger into a wall socket and insert

the connector directly to the bottom of your phone.

Charging time is approximately 2 hours for a standard size

battery pack. Your phone can be used during charging.

D. Optional Ear-microphone

Your handset can become hands-free with the optional ear microphone. Calls can be

answered by simply pressing the button located on the microphone. The ear

microphone can also be used in the walkie-talkie function. Press the button to talk, and

release to listen. To end calls, press and hold the button.

9

http://www.gblmedia.com

Charger

Cradle

SKYPE

E. Battery Charge

The handset can be charged on the charger cradle of base.

1. Place the handset in the charger cradle with keypad facing up.

2. While charging the handset, the LCD on handset will display “Battery in charger"

3. While the handset has been fully charged, the LCD on handset will display

“Battery charge OK".

4. The life time of battery will be affected by the surrounding temperature; the LCD on

handset will display "Charge state fail" and stop charging automatically while the

surrounding temperature is too high. The charging will be resumed once the

temperature is come down to be below 40 .

The suggested environment temperature is between 10 ~30 .

5.

10

http://www.gblmedia.com

F. Outdoot Antenna

Installation of the outdoor antenna is very

important for communication range and quality.

Be sure to follow the following steps.

1. Use the wrench to screw the antenna tightly.

2. Lock the 3 ground planes with the base part as

illustrated in Figure 2.

NOTE: Long and short ground planes should be

alternately arranged.

Ground planes x3

Figure 2

Figure 1

11

http://www.gblmedia.com

3. Assemble cable jack with the base part as illustrated

in Figure 3.

4. Find a pole which is over 5M long and 22~39mm in

diameter and screw it with the base tube as indicated in

Figure 4.

Note: A bamboo pole is preferred. If a metal one is

used, be sure it is isolated.

5. Put up the pole and make a loop with the

cable cord. The loop which is 15cm in diameter

to prevent water from going down into the base

unit (as figure 5).

6. The assembled outdoor antenna

(as indicated in Figure 6).

12

http://www.gblmedia.com

Notes:

1. Make sure that the cable is tied to the cable connector in order to

maintain the radio frequency transmission performance.

2. The ground plane should be at least 3 meters above the ground.

3. No obstruction can be existed within 3 meters from the antenna

(as shown in Fig 7~9).

4. Straighten the remaining cable.

5. Bending cable cord will increase loss of transmission power.

6. Make a loop before pulling the cable into the house. The loop

can prevent rain from going into the house.

7. The higher the antenna is installed the better the communication

will be.

8. keep the antenna and cable away from high-voltage source to

avoid electric shocks. Don’t install the antenna in the rain to avoid

thunder striking.

Figure 9

Figure 8

Figure 7

Over 3M (correct)

Less than 3M (incorrect)

Over 3M

(correct)

Over 3M

(correct)

Over 3M (correct)

Less than 3M

(incorrect)

13

http://www.gblmedia.com

Basic Operation for Base

A. Call function

1. Making calls

Press first and then dial the number after hearing the dial tone.

For example, dial the phone number 22183588.  22183588

To hang up, press again.

2. Redial

While in standby mode, press first, then press Redial .

 Redial

3. Automatic Dialing

1. First store phone numbers into the memory (20 sets of 16-digit number maximum)

(in stand-by mode)

MEMORY  22183588 MEMORY  N

Phone number Store (N: 00~19)

2. If the base unit is connected to a PBX.

We recommend you press REDIAL/P (PAUSE) followed the access number 0 or

9 for an outside line and the phone number.

NOTE: Pressing REDIAL/P (PAUSE) once creates a 3 second pause. This can

prevents miss dialing when you redial or dial a stored number.

3. Dialing a stored number (in standby mode)

Auto dial the phone number stored in location " N ".

Press First, then press MEMORY  N after hearing the dial tone.

 MEMORY  N (N: 00~19)

14

http://www.gblmedia.com

4. Answering Calls

Press to answer a call.

To hang up, press again.

4. Paging the target handset from the base unit

1. N N  paging ( N N is the ID of target handset)

Once only press key, it Means paging all handsets.

To stop paging, press again.

2. To accept a page, press any key except or remove from the charger if

handset is docked.

3. To end the intercom, press key or place the handset back onto the Charger.

NOTE: Once paging from the base unit, a confirmed melody will sounds if the

base unit receives the response from the handset. If the melody does not sound, it

means that:

(1) The handset is off.

(2) The handset is out of communication range.

5. Intercom during a call

While you are using the base unit to make or answer an incoming call, there are 2

methods to page the handset and still keep your current telephone call.

1. If you want to talk to any handset, simply press the key only. It will

put the current telephone line on hold, play the hold music to the line, and the

base unit will begin paging all handsets. Any handset can answer the page.

2. If you would like to talk to a specific handset, follow these steps:

HOLD  NN paging

( N N is the handset ID of target handset)

This operation will send the current telephone call on hold music, and the base

unit will page a specific handset ID N N . Only the handset with the unique ID

number N N will be paged.

3. During handset and base unit conversation, either the base unit or the handset

can resume conversation with the call on hold by pressing on the base unit,

or on the handset.

6. Transfer a phone

While you are using the base unit to make or answer an incoming call, there are two

methods to transfer the call over to other handsets.

15

http://www.gblmedia.com

MEMORY  MEMORY  Flash  N (0~9)

N : flash time

0 : 80ms

1 :100ms

2 :200ms

3 :300ms

4 :400ms

 MEMORY

5 :500ms

6 :600ms

7 :700ms

8 :800ms

9 :900ms

4. Set Ring Melody

MEMORY MEMORY or MEMORY

16

1. Transfer  N

N or Ϡ (N N is for a specific handset ID and Ϡ is for all handsets)

2. HOLD  TRANSFER  N N or Ϡ ( N N is for a specific handset ID and Ϡ is

for all handsets)

You can hear the transfer tone *Do, Mi, So for about 30 seconds. If there is no

answer from the target handset, you will hear feedback tones to alert you to receive

the call on hold again.

B. Setting

1. Ring volume

In standby mode, press ϧ orʳϰ to adjust ring volume. There are 8 steps can be

selected. The lowest level is mute.

2. Voice volume

In Intercom or speakerphone mode, press ϧ orʳϰʳto adjust the voice volume. There

are 7 steps can be selected.

3. Flash time setting

http://www.gblmedia.com

5. Set area code

MEMORY  MEMORY  1 plus area code (max 3 digits)

6. Set plus code Country code

MEMORY  MEMORY  2 plus country code (max 3 digits)

8. Register new handset

7. M/B ratio

1. Set the M/B ratio=40/60

2. Set the M/B ratio=33/66

MEMORY  MEMORY  3

MEMORY  MEMORY  4

 MEMORY

MEMORY  MEMORY  5  N N ( N N : New ID of handset) MEMORY

9. Set Tone dialing

10. Pulse dialing

MEMORY  MEMORY  6

 MEMORY

MEMORY  MEMORY  7

 MEMORY

MEMORY  MEMORY  8

 MEMORY

11. Set CID Type II ON

12. Set CID Type II OFF

MEMORY  MEMORY  9

 MEMORY

17

http://www.gblmedia.com

Pressing the key will place the current call on hold, and pick up the incoming call.

Pressing the key again will return you to the first call and place the second call

on hold.

G. Intercom:

1. Paging the base from the handset:

Press the key on the handset and then press BASE (left soft key) to

establish intercom.

When the receiving party’s voice is heard at the base, answer through the built

While talking on the phone, the key operates as a FLASH function as well.

18

Handset Operation and Function

A. Turn On/Off Handset:

1. You can power on the handset on by pressing and holding for 3 seconds.

2. You can power off the handset off by pressing and holding for 3 seconds.

B. Making a Telephone Call:

You can make an outgoing call in one of two ways.

1. Press , wait for dial tone, and then enter phone number.

2. Enter phone number first then press .

C. Answering incoming Calls:

On incoming calls, the ringer will ring or vibrate unless the ringer has been turned off.

1. If the handset is on charger cradle, lift the handset to pick up the incoming call.

2. If the handset is not on charger cradle, press any key to answer the incoming call

except .

3. If you do not take the incoming calls, the display will prompt you on how many calls

you have missed.

Note: While receiving incoming calls, you can mute the ring by pressing key.

D. Disconnecting calls:

You can end a call by pressing or by placing the handset onto the charger cradle.

E. Redial:

1. You can use the Up Arrow ( ) Key to scroll through the last 10 phone numbers dialed.

Select and press .

2. Press , then press OPTION Left soft Key redialing the last call.

F. Call waiting / Receiving a second call:

http://www.gblmedia.com

in microphone.

2. Paging the handset from the base:

 Press the key to establish the intercom.

 Press any key on the handset except to answer page.

3. Paging the handset from another handset:

This has to be done through the walkie-talkie mode. Please refer to the section.

Walkie-Talkie Between Handsets.

H. Walkie-Talkie between handsets:

1. Press the key followed by the 2 digit unique handset ID to establish contact.

2. The call in progress will be put on hold.

OPTION

"CHANGING

3. You may press and release the PTT key at any time to establish contact with a

separate handset.

4. You can press the and then Ϡ key to communicate to all of the other

handsets.

5. The base unit can join the conversation with the 2 other handsets by pressing the

key. By pressing the key again cancels the group

 OR press Ϡ key to transfer the phone call to any one of the handsets available.

Voice volume can only be adjusted DURING a call/

There are 6 levels to voice volume/

Use the up ( ) and down ( )

scroll keys to either increase or decrease the voice

To access the last 10 dialed numbers list; use the Up ( ) and down ( ) scroll keys, then:

volume.

conference.

6. During the group conference, the multi-Talk indicator on the base unit will be turned

on.

I. Transferring calls:

During a call in progress, press the (Left Option Key) first, then select TRANSFER

followed by:

 Either the unique ID number of the target handset to transfer the call on hold to

 OR press BASE (left soft key) to place the call on hold and be transferred to the base

unit

J. Voice Volume:

K. Changing Channel:

During a call in progress, you can press the ( Left Soft Key) and then

CHANNEL” key to change the radio channel to avoid radio interference.

Channel should be successfully changed with a sound of notification.

L. Last Ten Dialed Calls

1. Scroll through the list using the scroll keys and press the

key to select and

make the phone call.

2. OR press the SAVE (left soft key) to save the call.

19

http://www.gblmedia.com

Sayfa yükleniyor...

SENAO SN-358 PLUS Kullanım kılavuzu

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

SENAO SN-358 PLUS Kullanım kılavuzu

diğer dillerde

Diğer belgeler