Panasonic KXTS820FX Kullanma talimatları

PNQX2346TA FM1206NF60517

Operating Instructions

Integrated Telephone System

Model No. KX-TS820FX

Thank you for purchasing a Panasonic product.

Please read these operating instructions before using the unit and save them for

future reference.

English

KX-TS820_Cover.fm 1 ページ２０１７年５月１０日　水曜日　午前１１時１１分

2

Accessory information........................................................................... 3

For your safety ...................................................................................... 4

Important safety instructions ................................................................. 4

Specifications........................................................................................ 4

For best performance............................................................................ 5

Controls................................................................................................. 6

Connections .......................................................................................... 7

Setting up the unit before use ............................................................... 7

Making calls .......................................................................................... 8

Answering calls ..................................................................................... 8

Useful features during a call.................................................................. 9

Dial lock............................................................................................... 10

One-touch dialer.................................................................................. 11

Speed dialer........................................................................................ 13

Desk mount setup ............................................................................... 14

Wall mount setup................................................................................. 15

Troubleshooting................................................................................... 17

Index ................................................................................................... 18

Introduction

Preparation

Making/Answering Calls

One-Touch Dialer

Speed Dialer

Useful Information

Index

Table of Contents

KX-TS820FX.book Page 2 Thursday, January 13, 2011 4:16 PM

3

For your future reference

We recommend keeping a record of the following information to assist with any

repair under warranty.

Serial No. Date of purchase

(found on the bottom of the unit)

Name and address of dealer

Note:

≥ This equipment is designed for use on the Czech Republic and Slovakia analogue

telephone network.

≥ In the event of problems, you should contact your equipment supplier in the first instance.

≥ For use on other countries, please contact your equipment supplier.

Declaration of Conformity:

For information of Compliance with EU relevant Regulatory Directives,

Contact to Authorised Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

http://www.ptc.panasonic.eu/doc

Accessory information

Supplied accessories

Attach your purchase receipt here.

No. Accessory item Quantity

1 Handset 1

2 Handset cord 1

3 Telephone line cord 1

1

23

Introduction

KX-TS820_Introduction.fm 3 ページ２０１７年５月１０日　水曜日　午前１１時２６分

Introduction

4

For your safety

To prevent severe injury and loss of

life/property, read this section

carefully before using the product to

ensure proper and safe operation of

your product.

WARNING

Installation

≥ To prevent the risk of fire or electrical

shock, do not expose the product to rain

or any type of moisture.

Operating safeguards

≥ Do not disassemble the product.

≥ Do not spill liquids (detergents,

cleansers, etc.) onto the telephone line

cord plug, or allow it to become wet at

all. This may cause a fire. If the

telephone line cord plug becomes wet,

immediately pull it from the telephone

wall jack, and do not use.

CAUTION

Installation and location

≥ Never install telephone wiring during an

electrical storm.

≥ Never install telephone line jacks in wet

locations unless the jack is specifically

designed for wet locations.

≥ Never touch uninsulated telephone wires

or terminals unless the telephone line

has been disconnected at the network

interface.

≥ Use caution when installing or modifying

telephone lines.

≥ This product is unable to make calls

when the dial lock feature is turned on

(only number stored in the emergency

button can be called).

Important safety

instructions

When using your product, basic safety

precautions should always be

followed to reduce the risk of fire,

electric shock, and injury to persons,

including the following:

1. Do not use this product near water, for

example, near a bathtub, washbowl,

kitchen sink or laundry tub, in a wet

basement or near a swimming pool.

2. Avoid using a telephone (other than a

cordless type) during an electrical

storm. There may be a remote risk of

electric shock from lightning.

3. Do not use the telephone to report a

gas leak in the vicinity of the leak.

SAVE THESE

INSTRUCTIONS

Specifications

Power source:

From telephone line

Dimensions (H x W x D):

Approx. 93 mm k 172 mm k 220 mm

Mass (Weight):

Approx. 426 g

Operating conditions:

0 °C–40 °C, 20 %j80 % relative air

humidity (dry)

Note:

≥ Design and specifications are subject to

change without notice.

≥ The illustrations in these instructions

may vary slightly from the actual product.

KX-TS820FX.book Page 4 Thursday, January 13, 2011 4:16 PM

Introduction

5

For best performance

Environment

≥ The product should be kept free from

excessive smoke, dust, high

temperature, and vibration.

≥ The product should not be exposed to

direct sunlight.

≥ Do not place heavy objects on top of the

product.

≥ The product should be kept away from

heat sources such as radiators, cookers,

etc. It should not be placed in rooms

where the temperature is less than 0°C

or greater than 40°C. Damp basements

should also be avoided.

Routine care

≥ Wipe the outer surface of the product

with a soft moist cloth.

≥ Do not use benzine, thinner, or any

abrasive powder.

Notice for product disposal,

transfer, or return

≥ This product can store your private/

confidential information. To protect your

privacy/confidentiality, we recommend

that you erase information such as

one-touch dial numbers from the

memory before you dispose of, transfer,

or return the product.

Information for Users on Collection

and Disposal of Old Equipment and

used Batteries

These symbols (

1

,

2

,

3

) on the

products, packaging, and/or

accompanying documents mean that

used electrical and electronic products

and batteries should not be mixed with

general household waste. For proper

treatment, recovery and recycling of

old products and used batteries,

please take them to applicable

collection points, in accordance with

your national legislation and the

Directives 2002/96/EC and 2006/66/

EC. By disposing of these products

and batteries correctly, you will help to

save valuable resources and prevent

any potential negative effects on

human health and the environment

which could otherwise arise from

inappropriate

waste handling.

For more information about collection

and recycling of old products and

batteries, please contact your local

municipality, your waste disposal

service or the point of sale where you

purchased the items.

Penalties may be applicable for

incorrect disposal of this waste, in

accordance with national legislation.

For business users in the European

Union

If you wish to discard electrical and

electronic equipment, please contact

your dealer or supplier for further

information.

Information on Disposal in other

Countries outside the European

Union

These symbols (1, 2, 3) are only

valid in the European Union. If you

wish to discard these items, please

contact your local authorities or dealer

and ask for the correct method of

disposal.

Note for the battery symbol

This symbol (2) might be used in

combination with a chemical symbol

(3). In this case it complies with the

requirement set by the Directive for

the chemical involved.

123

Cd

KX-TS820FX.book Page 5 Thursday, January 13, 2011 4:16 PM

6

Controls

FLASH

REDIAL

EMERGENCY

AUTO/LOWER

PRO

G

RAM

DIAL LOCK

E

FG H

AC DB

KM

PA

USE

A

B

C

D

E

F

JKL

G

H

I

M

N

O

T

U

V

P

Q

R

S

W

X

Y

Z

TO

NE

1

2

3

4

5

6

7

8

9

0

L

VOL.





I J

1 {PDIAL LOCK} (page 10)

2 {PROGRAM} (page 9, 10, 11,

13)

3

{

AUTO/LOWER

}

(page 11, 13)

4

RINGER indicator

(page 8)

5

{£}

(TONE) (page 9)

6

{PAU SE }

(page 8)

7

{FLASH} (page 9)

8

{REDIAL} (page 8, 9, 10)

9

VOL. (Volume) {4}{3}

(page 8)

:

{EMERGENCY}

(page 10, 11)

; One-touch dial buttons

(page 11)

< Dial key buttons/

Memory station numbers

(page 13)

= RINGER selector (page 8)

Preparation

KX-TS820FX.book Page 6 Thursday, January 13, 2011 4:16 PM

7

Preparation

Connections

Connect the handset cord (1) to the handset and the unit. Connect the

telephone line cord until it clicks into the unit and telephone line jack (2).

After line connection, lift the handset to check for a dial tone.

≥ Use only a Panasonic handset for KX-TS820FX.

≥ Use only the supplied telephone line cord. Using another telephone line cord may not

allow the unit to work properly.

* For DSL/ADSL service users

Please attach a DSL/ADSL filter (contact your DSL/ADSL provider) to the telephone line

between the unit and the telephone line jack in the event of the following:

s noise is heard during conversations.

Setting up the unit before use

Dialing mode

If you cannot make calls, change this setting according to your telephone line

service.

The default setting is TONE.

TONE: For tone dial service.

PULSE: For rotary/pulse dial service.

1 Lift the handset.

2

{

PROGRAM

}

>

{

REDIAL

}

>

{

3

}

3 To select TONE, press {1}.

OR

To select PULSE, press {2}.

4 {PROGRAM}

≥ A long beep sounds.

5 When finished, hang up.

LINE

1

2

DSL /ADSL filter *

To single-line telephone jack

KX-TS820FX.book Page 7 Thursday, January 13, 2011 4:16 PM

8

Making calls

1 Lift the handset and dial the

phone number.

2 When you finish talking, place the

handset on the cradle.

Adjusting the handset volume

(4 levels)

Press VOL.{3} or VOL.{4}

repeatedly while talking.

≥ After hanging up, the volume level will be

saved.

To redial the last number dialed

(32 digits max.)

1 Lift the handset > {REDIAL}

≥ Redial will dial the last number you

dialed manually.

Pause (for PBX/long distance

service users)

A pause is sometimes required when

making calls using a PBX or long

distance service.

Example: If you need to dial the line

access number “9” when making

outside calls with a PBX:

1 Lift the handset to start calling.

2 {9} > {PAU SE }

3 Dial the phone number.

Note:

≥ A 3.5 second pause is inserted each

time {PAU S E} is pressed. Repeat as

needed to create longer pauses.

Answering calls

When a call is being received, the unit

rings and the ringer indicator flashes

quickly. You can answer the call by

simply lifting the handset.

Note:

≥ The ringer indicator will flash when

s a telephone number is dialed using

another phone which is in PULSE

mode and connected to the same

phone line, or

s someone picks up or hangs up

another phone connected to the same

phone line.

This is normal.

Adjusting the unit ringer volume

You can select the ringer volume to

HIGH, LOW or OFF. The default

setting is HIGH.

OFF HIGH

LOW

RINGER

Making/Answering Calls

KX-TS820FX.book Page 8 Thursday, January 13, 2011 4:16 PM

Making/Answering Calls

9

Useful features during

a call

Flash

{FLASH} allows you to use the

special features of your host PBX

such as transferring an extension call,

or accessing optional telephone

services.

Flash time

The flash time depends on your

telephone exchange or host PBX.

You can select:

80ms (milliseconds), 90ms, 100ms,

110ms, 160ms, 200ms, 250ms,

300ms, 400ms, 600ms, 700ms, or

900ms.

The default setting is 100ms.

1 Lift the handset.

2

{

PROGRAM

}

>

{

REDIAL

}

>

{

2

}

3 Press {0} to {9}, {£}, or {#} to

select the desired setting.

4 {PROGRAM}

≥ A long beep sounds.

5 When finished, hang up.

For call waiting service

users

To use call waiting, you must first

subscribe to the call waiting service of

your service provider/telephone

company. This feature allows you to

receive calls while you are already

talking on the phone. If you receive a

call while on the phone, you will hear

a call waiting tone.

1 Press {FLASH} to answer the

2nd call.

2 To switch between calls, press

{FLASH}.

Note:

≥ Please contact your service provider/

telephone company for details and

availability of this service in your area.

Temporary tone dialing

(for rotary/pulse service

users)

You can temporarily switch the dialing

mode to tone when you need to

access touch-tone services

(for example, answering services,

telephone banking services, etc.).

Press {£} (TONE) before entering

access numbers which require tone

dialing.

{1}: 80ms {2}: 90ms {3}: 100ms

{4}: 110ms {5}: 160ms {6}: 200ms

{7}: 250ms {8}: 300ms {9}: 400ms

{£}: 600ms {0}: 700ms {#}: 900ms

KX-TS820FX.book Page 9 Thursday, January 13, 2011 4:16 PM

Making/Answering Calls

10

Dial lock

This feature prohibits making outside

calls.

The default setting is OFF.

Important:

≥ When dial lock is turned on, only

phone number stored in the memory

of the {EMERGENCY} can be dialed

(only 1 one-touch dial).

≥ When dial lock is turned on, you can still

adjust the handset volume and answer

the second call by pressing {FLASH}.

≥ When dial lock is turned on, you cannot

store or erase the {EMERGENCY}.

To turn the dial lock on/off

1 Lift the handset.

2 {PDIAL LOCK}

3 Enter the unit password

(default: 1111) > {PDIAL LOCK}

≥ A long beep sounds.

4 When finished, hang up.

Note:

≥ If dial lock is turned on, pressing the dial

button will cause an error beep to sound.

Changing the unit password

Important:

≥ If you change the password, please

make note of your new password. The

unit will not reveal the password to you.

If you forget your password, consult your

nearest Panasonic service center.

1 Lift the handset.

2

{

PROGRAM

}

>

{

REDIAL

}

>

{

5

}

3 Enter the current 4-digit password

(default: 1111) > {PROGRAM}

≥ A beep sounds.

≥ If you have entered the wrong

password, error beep will sound.

Enter the correct password >

{PROGRAM}.

4 Enter the new 4-digit password

(0 to 9) > {PROGRAM}

≥ A long beep sounds.

5 When finished, hang up.

KX-TS820FX.book Page 10 Thursday, January 13, 2011 4:16 PM

11

One-touch dialer

You can store up to 20 phone

numbers in the one-touch dial buttons

(10 numbers in UPPER memory

locations and 10 numbers in LOWER

memory locations). Do not press any

one-touch dial buttons before storing

to prevent misoperation.

UPPER memory locations

Storing phone numbers

1 Lift the handset > {PROGRAM}

2 Enter a phone number up to

32 digits.

≥ If a pause is required for dialing,

press {PAUSE }. A pause stored in a

phone number counts as one digit.

≥ If a wrong number is entered, hang

up and repeat step 1.

3 Press a one-touch dial button.

≥ A long beep sounds.

4 When finished, hang up.

Note:

≥ We recommend you program an

emergency number in the

{EMERGENCY}.

≥ Emergency number is number stored in

the {EMERGENCY} that can be dialed

even when dial lock is turned on

(page 10).

Erasing a stored number

1 {PROGRAM}

2 Press the one-touch dial button.

≥ A long beep sounds.

Dialing a stored number

1 Lift the handset.

2 Press the one-touch dial button.

3 When you finish talking, place the

handset on the cradle.

LOWER memory locations

Storing phone numbers

1 Lift the handset > {PROGRAM}

2 Enter a phone number up to

32 digits.

≥ If a pause is required for dialing,

press {PAU SE}. A pause stored in a

phone number counts as one digit.

≥ If a wrong number is entered, hang

up and repeat step 1.

3 {AUTO/LOWER} > Press a

one-touch dial button.

≥ A long beep sounds.

4 When finished, hang up.

Erasing a stored number

1 {PROGRAM}

2 {AUTO/LOWER} > Press the

one-touch dial button.

≥ A long beep sounds.

Dialing a stored number

1 Lift the handset.

2 Press {AUTO/LOWER}

3 Press the one-touch dial button.

4 When you finish talking, place the

handset on the cradle.

One-Touch Dialer

KX-TS820FX.book Page 11 Thursday, January 13, 2011 4:16 PM

One-Touch Dialer

12

Index card

Use the index card to record the

names/phone numbers stored to the

one-touch dial buttons.

Cover

Index

Card

KX-TS820FX.book Page 12 Thursday, January 13, 2011 4:16 PM

13

Speed dialer

You can store up to 10 numbers in the

memory stations. The dialing buttons

{0} to {9} function as memory station

numbers. Do not press any memory

stations before storing to prevent

misoperation.

Storing phone numbers

1 Lift the handset > {PROGRAM}

2 Enter a phone number up to

32 digits.

≥ If a pause is required for dialing,

press {PAUSE }. A pause stored in a

phone number counts as one digit.

≥ If a wrong number is entered, hang

up and repeat step 1.

3 {AUTO/LOWER}

>

Press a

memory station number (

{

0

}

to

{

9

}

).

≥ A long beep sounds.

4 When finished, hang up.

Note:

≥ If a phone number is stored in a dial key

which already contains a phone number,

the old number is erased.

≥ We recommend you make a note of

which phone numbers are stored in

which dial keys.

Erasing a stored number

1 Lift the handset.

2 {PROGRAM} > {AUTO/

LOWER}

3 Press a memory station number

({0} to {9}) for the phone number

to be erased.

≥ A long beep sounds.

4 When finished, hang up.

Dialing a stored number

1 Lift the handset.

2 {AUTO/LOWER}

>

Press the

memory station number (

{

0

}

to

{

9

}

).

3 When you finish talking, place the

handset on the cradle.

Speed Dialer

KX-TS820FX.book Page 13 Thursday, January 13, 2011 4:16 PM

14

Desk mount setup

This unit can be used in 2 positions.

Low desk position (default)

High desk position

s You can adjust the wall mount adaptor to slope this unit.

s Changing to the high desk position.

1. Press the tab in the direction of the arrow

(1), then remove the wall mount adaptor

(2).

2. To attach the wall mount adaptor to high

( ), push it in the direction of arrows

((1) and (2)) as shown.

B

A

AA

B

A

B

AA

BB

Useful Information

KX-TS820FX.book Page 14 Thursday, January 13, 2011 4:16 PM

15

Useful Information

Wall mount setup

This unit can be mounted on a wall phone plate.

1 Pull down the handset hook

until it locks, so the tabs holds

the handset.

2 Press the tabs in the direction of the arrows (1), then remove the wall mount

adaptor (

2).

3 Tuck the telephone line cord

inside the wall mount adaptor,

and push it in the direction of

the arrow.

AA

Hi

g

h desk

p

osition

Low desk position

KX-TS820FX.book Page 15 Thursday, January 13, 2011 4:16 PM

16

Useful Information

4 Drive screws (not

included) into the wall

using the wall

template below.

Connect the

telephone line cord.

Mount the unit, and

then slide it down.

To temporarily set the handset down during a

conversation, place it as shown in this picture.

Wall Template

Screws

8.3 cm

To single-line

telephone jack

Hooks

8.3 cm

KX-TS820FX.book Page 16 Thursday, January 13, 2011 4:16 PM

17

Useful Information

Troubleshooting

Liquid damage

Caution:

≥ To avoid permanent damage, do not use a microwave oven to speed up the drying

process.

Problem Cause/solution

The unit does not work.

≥ Check the connections (page 7).

The unit does not ring.

≥ The RINGER selector is set to OFF. Set to HIGH or

LOW (page 8).

You cannot dial.

≥ Check the dial tone. If there is no dial tone, check

the connections (page 7).

≥ The dialing mode may be set incorrectly. Change

the settings (page 7).

≥ Dial lock is turned on. To turn it off, see page 10.

≥ {PROGRAM} or {PDIAL LOCK} may have been

pressed. Hang up the handset and try again.

You cannot store a phone

number in memory.

≥ Confirm the handset is off the cradle.

≥ Do not enter a phone number more than 32 digits

long, or the entered number and the previously

stored number will be cleared.

≥ When using the dial lock (page 10), you cannot

store emergency number in the {EMERGENCY}.

You cannot redial by

pressing {REDIAL}.

≥ If the last number dialed was more than 32 digits

long, the number will not be redialed correctly.

How to exit the program

setting?

≥ Place the handset on the cradle.

Problem Cause/solution

Liquid or other form of

moisture has entered the

unit.

≥ Disconnect the telephone line cord from the unit.

Leave the unit to dry for at least 3 days. After the

unit is completely dry, reconnect the telephone line

cord.

KX-TS820FX.book Page 17 Thursday, January 13, 2011 4:16 PM

18

Index

A Accessories: 3

Answering calls: 8

C Call waiting: 9

Connections: 7

Controls: 6

D Dial lock: 10

Dialing mode: 7

F Flash: 9

L LOWER memory: 11

M Making calls: 8

O One-touch dialer: 11

P Password: 10

Pause: 8

R Redial: 8

Rotary/pulse service: 9

S Speed dialer: 13

T Temporary tone dialing: 9

Troubleshooting: 17

U UPPER memory: 11

V Volume

Handset: 8

Ringer: 8

W Wall mount setup: 15

Index

KX-TS820FX.book Page 18 Thursday, January 13, 2011 4:16 PM

19

KX-TS820_Useful.fm 19 ページ２０１７年５月１７日　水曜日　午後１２時３３分

20

KX-TS820_Useful.fm 20 ページ２０１７年５月１７日　水曜日　午後１２時３３分

Sayfa yükleniyor...

Panasonic KXTS820FX Kullanma talimatları

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

Panasonic KXTS820FX Kullanma talimatları

diğer dillerde

İlgili makaleler

Diğer belgeler