7
en
Safety instructions
After each use, whenever the appliance is unsupervised, prior to
assembly, prior to disassembly, prior to cleaning and in the event
of an error, the appliance must always be disconnected from the
mains. Prior to replacing accessories or replacement parts that are
moved during operation, the appliance must be switched off and
disconnected from the mains.
W Risk of suffocation!
Do not allow children to play with packaging material.
Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our website.
Contents
Intended use ............................................... 6
Safety instructions ......................................6
Overview.....................................................7
Operation .................................................... 7
Cleaning and servicing ...............................8
Storage .......................................................8
Disposal ...................................................... 8
Guarantee...................................................8
Assemble the appliance (X Fig. 1):
■ Place the container on the motor unit
and rotate in a clockwise direction until it
locks into position.
■ Insert the strainer basket and rotate gently
until it is situated fully on the container.
■ Attach the pressing cone.
Pressing fruit
■ Press halved citrus fruit onto the
pressing cone and hold fruit in position.
The citrus press starts running when
the fruit is pressed onto the pressing
cone (X Fig. 2).
Note: The pressing cone may rotate in
a clockwise or anti-clockwise direction.
The direction of rotation may change while
the fruit is being pressed.
If excessive pressure is applied, the
pressing cone stops. Reduce the pressure
until the pressing cone restarts.
■ To switch off the appliance, reduce the
pressure on the pressing cone. The
citrus press switches off automatically.
■ Empty the full strainer basket.
Note (for MCP35.. only):
The fruit pulp content of the juice can be
affected by rotating the lower filter insert (f).
A narrower gap means less fruit pulp
(X Fig. 1a), but also a slower flow rate.
If more juice is required, adjust or remove
the lower filter insert.
Take the strainer basket apart in order to
clean it.
When re-assembling the strainer basket,
ensure that the parts are in the correct
position (X Fig. 1b).
Overview
Please fold out the illustrated page.
X Fig. 1
a Motor unit
b Container, capacity 0.8 l
c Strainer basket
d Pressing cone
e Lid
f Lower filter insert (MCP35.. only)
Operation
Preparation
■ Clean the individual components before
using for the first time.
■ Unwind the cord.
■ Place the appliance on a smooth, clean
surface.