AKE.370.502.01.03
GASEOUS FIXED BASED OVEN
CONTROLLER (7” TFT TOUCH)
USER MANUAL
AKE.370.502.01.03 GASEOUS FIXED BASED OVEN CONTROLLER (7” TFT TOUCH) USER MANUAL
1
1.DEVICE DIMENSIONS
2.RELAY CARD AND DIMENSIONS
AKE.370.502.01.03 GASEOUS FIXED BASED OVEN CONTROLLER (7” TFT TOUCH) USER MANUAL
2
3.DEVICE CONNECTION DIAGRAM
AKE.370.502.01.03 GASEOUS FIXED BASED OVEN CONTROLLER (7” TFT TOUCH) USER MANUAL
3
4. CAUTIONS
• Be sure to read the operating instructions before using the appliance and follow the
instructions and cautions in the manual when using the appliance. Otherwise the responsibility
for accidents and damages that may belong to the buyer.
• Installation and connection of the device should be done by experienced technicians in
accordance with the diagram. Otherwise the responsibility belongs to the buyer.
• The operating ambient temperature of the device should be between 0 to 50 ᵒC.
• The supply voltage must be checked before the device is energized.
• Precautions must be taken to prevent liquid flow into the device and metal cips to conduct.
Otherwise, there may be accidents such as fire and electric shock.
• In case of any malfunction, do not interfere with the device. If the malfunction continues,
notify the service in writing with the explanation.
• Electrical and mechanical precautions must be taken to prevent accidents and damages if the
device is broken while being attached to the machine.
• Never remove the warranty label. Otherwise, your device is not covered by the warranty. The
appliance must be repaired by authorized service personnel.
• The cables carrying the sensor and input signals to the device shall be prevented from being
moved and influenced separately as far as possible from the inductive load cables operating
as feed, control, switching.
• Shielded cables should be selected for the cables that carry the sensor and input signals to the
device, and the cable shield must be connected to the ground.
• If more than one electronic device is used, separate feeder lines for each device must be
towed. Insulation traces and line filters should be used on the supply line where there is
excessive electrical noise.
• No control circuit should be connected to the device supply line.
• The appliance should be cleaned with a soft, damp cloth with a front panel. Thinner etc. do
not use substances.
• Please do not use high-torque screwdrivers when mounting the device.
AKE.370.502.01.03 GASEOUS FIXED BASED OVEN CONTROLLER (7” TFT TOUCH) USER MANUAL
4
5. HOW TO USE TOUCH PANEL
• When the machine is power on, do not touch all buttons until the light of the On / Off button
is on.
• As indicated in the following illustration
6. GENERAL FEATURES
It is an elegant and stylish control panel designed for running gaseous fıxed based oven. It provides
ease of use with its high sensitivity touch buttons. It sets its users with technology with warning
lights, audible warning system, and clear displays. Gaz brülörü ile tümleşik çalışarak fırın için gerekli
olan gaz miktarını otomatik olarak ayarlamanın yanında oluşabilecek hatalarda kullanıcıyı bilgilendirir.
The flexible, impact resistant, waterproof panel makes cleaning easier and its lifetime longer.
Company-focused designs can be made with changeable visual design.
6.1.STANDARD TECHNICAL SPECIFICATIONS
• 7 inch, 480x800px resolution, 16 million coloured TFT screen
• 6 units LED illuminated touch buttons
• 5 units touch button
• 4 units 220VAC output (Max: 10A)
• 2 units dry contact relay outputMax: 220VAC-10A)
• 1 unit 0-10V analog output(for SSR )
• 1 unit thermocuple input
• 100-240 VAC operating voltage
• Buzzer warning system
• 32 leds circular animation system
• Impact resistant, waterproof, gasket protected front panel
• Plastic enclosure
6.2. OPTIONAL FEATURES
• Different suply voltage 12-24V AC/DC
AKE.370.502.01.03 GASEOUS FIXED BASED OVEN CONTROLLER (7” TFT TOUCH) USER MANUAL
5
• Customer specific label and software
7.CİHAZ KULLANIMI
A
Read Temperature
B
Adjusted Temperature
C
Adjusted Time
D
Remaining Time
E
Flame Size Indicator
ON/OFF: In the case of oven has energy, please hold down the “ON/OFF”
button to open/close oven.
ACTIVATE/INACTIVATE: When the oven is “ON”, please touch button
to activate or disactivate the oven icon shows that oven is on position
TEMPERATURE SETTING: In home screen,please touch temperature setting
button and adjust the temperature with the helping of and
buttons.The adjusted value will be flashed on and off on the screen. Please
touch backspace to save alterations.
FLAME SIZE SETTING: In home screen,please touch flame size setting button
and adjust the flame size with the helping of and buttons.The
black frame will be flashed on and off on the screen. Please touch backspace
to save alterations.
A
B
C
D
E
AKE.370.502.01.03 GASEOUS FIXED BASED OVEN CONTROLLER (7” TFT TOUCH) USER MANUAL
6
LAMP: Please touch the lamp button to turn on or turn off the lamp
TIMER SETTING: In home screen,please touch timer setting button and
adjust the time with the helping of and buttons.The adjusted
value will be flashed on and off on the screen. Please touch backspace to
save alterations.
8.DEVICE MALFUNCTION SITUATION
In case of gas alarmi, the warning buzzer system is activated and heater output is closed.
.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
