Silk'n FaceTite Mini El kitabı

FACETITE MINI

FAC01

2

A

B

1

8

2

3

4

5

6

7

9

F

D

A

B

C

E

Legal notice

Silk'n Beauty Ltd. reserves the right to make changes to its

products or speciﬁcations to improve performance, reliability, or

manufacturability. Information furnished by Silk'n Beauty Ltd. is

believed to be accurate and reliable at the time of publication.

However, Silk'n Beauty Ltd. assumes no responsibility for its use.

No license is granted by its implication or otherwise under any

patent or patent rights of Silk'n Beauty Ltd.

No part of this document may be reproduced or transmitted in

any form or by any means, electronic or mechanical, for any

purpose, without the express written permission of Silk'n Beauty

Ltd. Data is subject to change without notiﬁcation.

Silk'n Beauty Ltd. has patents and pending patent applications,

trademarks, copyrights, or other intellectual property rights

covering subject matter in this document. The furnishing of this

document does not give you any license to these patents,

trademarks, copyrights, or other intellectual property rights except

as expressly provided in any written agreement from Silk'n Beauty

Ltd. Speciﬁcations are subject to change without notice.

Silk’n and the Silk’n logo are registered trademarks of Silk'n Beauty

Ltd.

Invention Works B.V.

Galileïstraat 17, 3029 AL Rotterdam, The Netherlands

www.silkn.eu – inf[email protected]

3

Table of content

1 Package contents/product parts____________________ 5

2 General information_______________________________ 5

2.1 Reading and storing the user manual______________________ 5

2.2 Explanation of symbols________________________________ 5

3 Safety____________________________________________ 6

3.1 Proper use__________________________________________6

3.2 Safety instructions____________________________________ 7

4 Product description_______________________________12

5 Check the product and package contents___________13

6 Charging_________________________________________13

7 Operation_______________________________________ 14

7.1 Switching the product on/o and selecting an energy level____ 14

7.2 Treatments________________________________________ 15

7.3 What to expect_____________________________________15

7.4 Possible side eects__________________________________ 15

7.5 Get started!________________________________________ 16

8 Cleaning_________________________________________ 17

9 Storage__________________________________________18

10 Troubleshooting__________________________________ 18

11 Technical data____________________________________20

12 Declaration of conformity_________________________ 20

13 Disposal_________________________________________ 21

13.1 Disposing of packaging________________________________21

13.2 Dispose of old electrical product________________________21

14 Warranty________________________________________ 21

15 Customer service________________________________ 22

4

1

Package contents/product parts

1

FaceTite Mini

2

Electrodes

3

Treatment surface

4

LED lights

5

Control button

6

Energy level indicator light

7

Battery indicator light

8

Charging port

9

USB cable

2

General information

2.1

Reading and storing the user manual

This user manual is a part of the FaceTite Mini

(hereinafter called "product"). It contains important

information on how to set up and use the product.

This user manual is based on the standards and

regulations that are valid within the European Union. Outside the

EU, please also note the country-speciﬁc directives and laws.

Read the user manual carefully, in particular the safety instructions,

before using the product. Failure to follow this user manual may

lead to severe injuries or product damage.

Keep this user manual for future reference. If you pass this product

on to a third party, you must also supply this user manual.

2.2

Explanation of symbols

The following symbols are used in this user manual, on the product

or on the packaging.

5

WARNING!

This signal symbol/word denotes a hazard with an average risk level

that could lead to death or severe injury if it is not avoided.

CAUTION!

This signal symbol/word denotes a hazard with a low risk level that

could lead to mild or moderate injury if it is not avoided.

NOTICE!

This signal word provides a warning about potential material

damage.

This symbol provides you with useful additional

information on handling and use.

Declaration of conformity (see chapter “Declaration of

conformity”): Products marked with this symbol meet

all the applicable Community regulations of the

European Economic Area.

Do not use the product in the vicinity of bathtubs,

showers, washbasins or other vessels containing water.

3

Safety

3.1

Proper use

The product is exclusively intended for anti-ageing treatments of

the facial skin.

The product is intended for private use only and is not suitable for

commercial use. Use the product only as described in this

6

operating manual. Any other use is improper and may lead to

product damage or even personal injury. This product is not a toy.

The manufacturer or retailer assumes no liability for damage

caused by improper or incorrect use.

3.2

Safety instructions

WARNING! RISK OF ELECTRIC SHOCK!

• Only connect the USB cable if the voltage

of the voltage source matches the

information shown on the rating plate.

• The product must only be operated with

extra low voltage.

•Do not use the product or USB cable if

they are damaged or defective. The

manufacturer or customer service must

replace the damaged or defective parts to

avoid risks.

•Only use the product with the supplied

USB cable.

•The supplied USB cable can only be

connected to the product. Do not use for

other purposes.

• Do not open the housing; instead, have a

qualiﬁed professional perform repairs.

Contact the customer service team for

this. Liability and warranty claims are

waived in the event of repairs performed

7

by the user, improper connection or

incorrect operation.

• Do not use the product while charging.

• Do not immerse the product or USB cable

in water or other liquids.

• Keep the USB cable away from water. It is

not waterproof.

• Always switch the product o when you

are not using it, when you intend to clean

it, or in the event of a malfunction. Always

unplug the USB cable when you are not

charging the product.

• Never touch the USB cable with wet or

damp hands.

• Never insert any objects into the housing.

• Never move, pull, or carry the product by

the USB cable.

• Keep the product and USB cable away

from open ﬂames and hot surfaces.

•Only use the product indoors.

8

WARNING! DANGER TO CHILDREN

AND PERSONS WITH REDUCED

PHYSICAL, SENSORY OR MENTAL

ABILITIES (E.G. PARTIALLY DISABLED,

ELDERLY PERSONS WITH REDUCED

PHYSICAL AND MENTAL ABILITIES) OR

LACK OF EXPERIENCE AND

KNOWLEDGE (E.G. OLDER CHILDREN).

•Children and persons with reduced

physical, sensory or mental abilities (e.g.

partially disabled, elderly persons with

reduced physical and mental abilities) or

lack of experience and knowledge (e.g.

older children) are not allowed to operate

the product.

• Keep children away from the product and

the power cable.

• Children may not play with the product.

•Cleaning and user maintenance must not

be carried out by children.

9

CAUTION!

Do not use if you:

• have a pacemaker or internal deﬁbrillator, or anyectrical

implant anywhere in the body.

•suer from poorly controlled endocrine disorders, such

as diabetes and thyroid conditions.

• have a history of skin cancer, or current conditioype of

cancer, or pre-malignant moles.

• have received radiation therapy or chemotherapy

treatments within the past 3 months, or have areas of

potential skin malignancies.

• have an impaired immune system due to

immunosuppressive diseases such as AIDS and HIV, or

use immunosuppressive medications.

• have used Isotretinoin (Accutane®) within 6 months prior

to treatment.

• have a disease related to photosensitivity, such as

porphyria, polymorphic light eruption, solar urticaria,

lupus, etc.

•suer from epilepsy.

• are pregnant or nursing.

Do not use on areas that have:

• a permanent implant such as metal plates and screws,

silicone implants, or areas with injected ﬁlls or toxins.

• any active condition in the treatment area, such as sores,

psoriasis, eczema, rashes, open lacerations, abrasions, or

lesions.

• traumatized or injured skin.

• had recent exposure to the sun without protection (wait

1 day); for tanned or sunburnt skin, wait 3 days.

• had any surgery within 3 months prior to treatment.

• tattoos.

• long or thick hair. Use of the product may result in light

bruising.

10

Consult your physician before continue to use, if

you have side eects, such as itchy skin within 48

hours of ﬁrst use.

Consult your physician if you have:

• couperose or rosacea.

• a history of diseases stimulated by heat, such as recurrent

herpes simplex in the treatment area. If so, you may treat

only following a prophylactic regime.

• used physician-prescribed drugs on your skin within the

past 6 months.

• a history of skin disorders, keloids, abnormal wound

healing, as well as very dry and fragile skin.

• any other condition which, in the opinion of your

physician or dermatologist, would make it unsafe for you

to be treated.

NOTICE! RISK OF DAMAGE!

• Operate the product on an easily

accessible, level, dry, heat resistant and

suciently stable work surface. Never

place the product on the edge of the work

surface.

•Never place the product on or near hot

surfaces (stove tops, etc.) and never

expose the product to high temperatures

(heaters, etc.) or to bad weather (rain,

etc.).

• Keep the product and the power cable

away from open ﬂames and hot surfaces.

11

• Never immerse the product in water to

clean it.

• Never wash the product in the dishwasher.

This would destroy it.

• Stop using the product if any of its

components are cracked or deformed.

Only replace damaged components with

matching original spare parts.

• Do not attempt to repair or modify the

product yourself. Have repairs carried out

by trained personnel.

• Only use the product at ambient

temperatures between 10 °C and 35 °C.

• This appliance contains batteries that

cannot be replaced by users.

• This appliance contains batteries that are

non‑replaceable. When the battery is at

end of life, the appliance shall be properly

disposed of.

4

Product description

This product has been designed for the reduction of facial signs of

ageing. It makes use of RF technology, which has an eect on the

delicate regions of the face. It deeply penetrates the skin to

reconstruct the collagen, tightens the tissue and reduces ﬁne lines.

You can treat the following parts of the face (see Fig. B):

A

lines between eyebrows

D

wrinkles around the mouth

B

crow's feet

E

nasolabial folds

C

ﬁne lines under the eyes

F

tear trough

12

5

Check the product and package

contents

NOTICE! RISK OF DAMAGE!

If you are not cautious when opening

the packaging with a sharp knife or

other pointed objects, you may quickly

damage the product. Be very careful

when opening it.

1. Take the product out of the packaging.

2. Check to make sure that all parts are included (see Fig. A)

3. Check whether the product or individual parts are damaged.

If this is the case, do not use the product. Contact our

customer service.

6

Charging

WARNING! RISK OF INJURY!

• Do not charge when the product is in use

or if it is wet. Make sure it is dry before

charging.

• Only charge the product with the supplied

USB cable.

• Only charge the product at temperatures

between 0 and 40 °C.

13

• Always unplug the USB cable after

charging.

• Charge the battery completely before ﬁrst use.

• The battery indicator light

7

will blink orange when

the battery is low. Recharge the product.

• The product cannot be used during charging.

• When fully charged, the product can be used for 20-30

minutes. The duration of the product use may vary

according to dierent energy levels.

1. Plug the smaller end of the USB cable

9

into the charging

port

8

of the product.

2. Plug the larger end of the USB cable into the USB port of a

compatible USB power source (e.g. USB power adapter or

computer) for charging.

Charging starts automatically and the battery indicator light

will blink green.

3. When the product is fully charged the battery indicator light is

constant green. Unplug the USB cable from the charging port

and the USB power source.

7

Operation

7.1

Switching the product on/o and selecting an

energy level

• The product has four energy levels. Level 1 is the lowest

energy level and level 4 is the highest.

• With the control button

5

, you can turn the product

on and o, and you can select an energy level.

1. Press and hold the control button for 2 seconds.

Level 1 is activated. The energy level indicator light

6

lights

up white.

Press the control button again to move to the next level.

After level 4, it goes back to level 1.

14

2. Press and hold the control button again for 2 seconds.

The product is switched o.

7.2

Treatments

- Start with energy level 1, and change to a higher energy level

as long as the temperature feels comfortable in the treatment

area.

- Use the product for 3 to 5 minutes on each treatment area

for maximum eectiveness.

- Use the product 2 to 3 times a week for the ﬁrst eight weeks.

- After eight weeks, use the product weekly, to maintain the

eect.

For maximum eectiveness:

- Make sure you apply enough Slider Gel (or any other water-

based gel) to cover the electrodes on the treatment area

before use.

- Do not leave the product on one spot of the skin. Keep

moving the product while covering the entire treatment area.

This will prevent overheating of the skin and reduces the

possibility of any adverse eect.

- Make sure the 3 electrodes

2

are always in full contact with

the skin.

- If the energy level feels uncomfortable, reduce it to a level

that is comfortable for you.

- Only change the energy level when the product is not in

contact with skin.

7.3

What to expect

During a treatment session it is normal to experience or feel:

- A sensation of warmth

- Some redness or slight swelling: this should subside within a

few hours, or up to one day.

- A buzzing sound of the RF current.

7.4

Possible side eects

If you follow the instructions fully and pay attention to all warnings

and contraindications, complications and side eects are

uncommon. However, every cosmetic treatment, including those

15

designed for home use, involves some degree of risk. Therefore it

is important that you understand and accept the risks and

complications that may occur.

- Excessive edema (swelling) and erythema (redness) are rare

reactions to the treatment that, in most cases, subside within a

few days. In case these signs appear, immediately use a damp

cool cloth to cool the area for at least 10 minutes and apply an

anti-burn cream.

- In rare cases the user may experience dilation of the

superﬁcial blood capillaries. This may result in a temporary

redness for a few days. Also, some of the capillaries may

present red spots that will also reduce with time. If these signs

appear, we recommend that you cool the area with chilled

water immediately.

Consult your physician if you experience any persistent

symptoms including pain, skin redness, swelling or a burning

sensation.

If unexpected side eects, such as itching, occur within 48

hours of your ﬁrst treatment, seek medical advice before

continuing treatments.

7.5

Get started!

1. Make sure that your skin is clean and dry, and that you have

removed all jewelry.

2. Remove the product and the other components from the

box.

3. Remove the protective ﬁlm that covers the electrodes

2

.

4. Start the product: Press the control button

5

. The product

starts at energy level 1 automatically, and 1 energy level

indicator light will turn on.

Check whether the Slider Gel has expired.

5. Apply a thin layer of Slider Gel over the treatment surface of

the product.

Slider Gel (or any other water-based gel) facilitates smooth

movement of the treatment surface over the skin and enables

conductivity. To ensure safe and ecient treatment, always

start by applying Slider Gel and apply more gel if needed.

16

6. Using energy level 1, place the product on the area you want

to treat. Make sure that it is in good contact with the skin. You

will feel a mild sensation of warmth.

7. Move the product in gentle massage-like motions on the area

you wish to treat. Progress slowly and carefully. Keep moving

the product ensuring that the 3 electrodes stay in full contact

with the skin as you treat the area.

8. With the product constantly in motion, treat each area for at

least 3-5 minutes.

9. Increase the energy level gradually. Using the highest energy

level will get the best results, but it's important that you set

the energy level that is comfortable for the area you are

treating.

You will feel the skin temperature increase as you increase the

energy level. It usually takes about 1 minute for the product to

reach the required temperature. During the treatment your

skin will get a little red. Don't worry; this is normal.

Stop immediately if you feel any discomfort.

10. Try to move the product slowly at ﬁrst. If the treatment area

is hot and uncomfortable, try to move the product faster.

11. Clean the treated area: remove the Slider Gel residue o the

treatment surface , and clean the skin with warm water. Dry

the skin and apply moisturizing facial products.

8

Cleaning

NOTICE! RISK OF SHORT CIRCUIT!

•Do not immerse the product in water or

other liquids.

• Make sure that no water or other liquid

gets inside the housing.

17

NOTICE! RISK OF DAMAGE!

• Do not use any aggressive cleaners, sharp

or metallic cleaning utensils such as knives,

hard scrapers or similar items. These could

damage the surfaces.

1. Turn o the product. Gently wipe o the Slider Gel of the

treatment surface

3

with clean, damp paper (such as toilet

paper or a wipe). Make sure you remove all gel residue to

prevent it from solidifying or damaging the product.

You can also use cleaning alcohol (up to 65%).

2. Wipe the product and the treatment surface with a slightly

damp cloth.

3. Dry o the product with a soft, dry cloth.

9

Storage

After cleaning, we recommend you keep the product in the

original packaging. Make sure that the product is completely dry

before storage.

10

Troubleshooting

Some problems may be caused by minor faults that you can ﬁx

yourself. To do so, follow the instructions in the following table. If it

is still not possible to resolve the problem, contact customer

service. Do not repair the product yourself.

Malfunction Possible cause Solution

The product cannot

be switched on. The battery is ﬂat. Charge the product (see

section "Charging").

The battery indicator

7

blinks orange. The battery is low.

Product does not get

warm although it is

switched on.

Insucient contact

between the

treatment surface

3

and the skin or

not enough Slider Gel

is applied to the

treatment surface.

Apply enough Slider Gel to

the treatment surface and

make sure it is in full

contact with the skin.

18

Malfunction Possible cause Solution

One or several lights

6

blink

continuously.

A malfunction has

occurred. Switch the product o

completely and then switch

it on again.

19

11

Technical data

Model: FAC01

Technology: RF & LED light energy technology

LED light energy: 630 nm±5 nm

RF: 1 MHz±30%; max. 13 W

Operation and safety: Thermal sensor and heat

stabilizer:

These measure the skin temperature,

stabilize the heat energy and prevent

overheating. When the skin

temperature reaches 43°C, the

stabilizer will automatically stop

emitting heat, until the skin

temperature lowers enough for the

stabilizer to resume heating.

Movement sensor:

The sensor will only emit RF heat

when you are moving the product

across your skin.

Product weight: approx. 51 g

Operating temperature: 10 °C - 35 °C

Storage temperature: -20 °C - +60 °C

Relative air humidity during

operation: 30 - 75%

Relative air humidity during storage: 10 - 75%

Ambient pressure during

operation: 500 - 1060 hPa

Ambient pressure during storage: 700 - 1060 hPa

Input voltage: 5 V/1 A

Battery capacity: 500 mAh

Charging connection: USB type C

Charging time: approx. 3 hours

Operating time: 20 to 30 minutes with fully charged

battery

12

Declaration of conformity

You can request the EU declaration of conformity from

the address provided at the end of this manual.

20

Sayfa yükleniyor...

Silk'n FaceTite Mini El kitabı

Silk'n FaceTite Mini El kitabı

diğer dillerde

İlgili makaleler

Diğer belgeler