YPC-1_E.fm Page -1 Thursday, September 18, 2003 9:57 AM
• To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
• Install this unit in a well ventilated, cool, dry, clean place -
away from direct sunlight, heat sources, vibration, dust,
moisture, and/or cold.
• Locate this unit away from other electrical appliances, motors,
or transformers to avoid humming sounds.
• Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in a environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause as electrical
shock, fire, damage to this unit, and/or personal injury.
• Avoid installing this unit where foreign object may fall onto
this unit and/or this unit may be exposed liquid dripping or
splashing. On the top of this unit, do NOT place:
• Other components, as they may cause damage and/or
discoloration on the surface of this unit.
• Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
• Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damages to
this unit.
• Do not operate this unit upside-down. It may overheat,
possibly causing damage.
• Do not use force on switches, knobs and/or cords.
• Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
• Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed. The
cabinet should never be opened for any reasons.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
CAUTION:
READ THIS BEFORE OPERATING THIS UNIT
YPC-1_E.fm Page 0 Thursday, September 18, 2003 9:57 AM
1
The Yamaha YPC-1 passive controller features a 5-way input selector and a volume adjustment
function. Since it does not include any active elements, such as an internal amplifier, the YPC-1 can
route an unmodified analog source signal to the output jacks.
Typically, you can connect the YPC-1 prior to the power amplifier to select the input source and adjust
the volume level. It also features two identical output jacks that enable bi-amp connection.
The YPC-1 uses high-quality parts specially selected for the best sound quality for the jacks, switches
and volume control, minimizing analog signal deterioration during transmission.
FEATURES
YPC-1_E.fm Page 1 Thursday, September 18, 2003 9:57 AM
2
INPUT selector
Selects the signal source from five AUDIO INPUT jacks (1-5) on the
rear panel.
VOLUME control
Adjusts the signal level at the AUDIO OUTPUT jacks.
Turn the volume to minimum before playing the sources.
CONTROLS AND FUNCTIONS
YPC-1_E.fm Page 2 Thursday, September 18, 2003 9:57 AM
3
AUDIO INPUT jacks
Connect external components to these jacks to input analog signals.
Use the INPUT selector on the front panel to select an input source from
jacks 1 through 5.
AUDIO OUTPUT jacks
Connect a power amplifier to these jacks.
The same signal is output to these two jacks (1 and 2).
YPC-1_E.fm Page 3 Thursday, September 18, 2003 9:57 AM
4
CONNECTIONS
MX-D1
CD player etc.
YPC-1
Turn off the power of the power amplifier,
and then use high-quality, short audio pin
cables to connect the power amplifier.
You can connect up to five components that
feature analog audio output jacks.
Use high-quality audio pin cables for
connection.
YPC-1_E.fm Page 4 Thursday, September 18, 2003 9:57 AM
5
High-range speaker (right)
Mid/low-range speaker
(right)
MX-D1
(for mid/low-range)
CD player etc.
High-range
speaker (left)
Mid/low-range
speaker (left)
MX-D1
(for high-range)
<Bi-amp connection example using MX-D1>
YPC-1_E.fm Page 5 Thursday, September 18, 2003 9:57 AM
6
BLOCK DIAGRAM
AUDIO INPUT
VOLUMEINPUT
AUDIO OUTPUT
1
2
1
2
3
4
5
YPC-1_E.fm Page 6 Thursday, September 18, 2003 9:57 AM
7
The VOLUME control features a precut brass
case, gold plated multi-contact brush, and low-
resistance, low-distortion carbon ink, which
together provide very smooth operation and an
L/R linkage error of ±1 dB or less.
The INPUT selector features a rotary switch
designed specifically for the YPC-1. The
contact resistance is less than 5mΩ, which
contributes to signal transmission with less
distortion.
YPC-1_E.fm Page 7 Thursday, September 18, 2003 9:57 AM
8
Input Connectors : Five stereo pairs (RCA pin jacks)
Max. input : 30 V
Impedance : 10 kΩ
Volume Max. attenuation : 120 dB
LR linkage tolerance: ±1 dB (-100 dB to 0 dB)
Output Connectors : Two stereo pairs (RCA pin jacks)
Impedance : 10 kΩ or less
Dimensions 240 x 75 x 269 mm (9-7/16” x 2-15/16” x 10-9/16”) (W x H x D)
Weight 3.4 kg (7 lbs 8 oz)
Specifications are subject to change without notice.
SPECIFICATIONS
YPC-1_E.fm Page 8 Thursday, September 18, 2003 9:57 AM
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
This document is printed on chlorine free (ECF) paper with soy ink.
2003 All Rights Reserved.
C
Printed in Japan WC04310
YPC-1_E.fm Page 10 Thursday, September 18, 2003 9:57 AM
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
diğer dillerde
- français: Yamaha YPC-1 Le manuel du propriétaire
- italiano: Yamaha YPC-1 Manuale del proprietario
- svenska: Yamaha YPC-1 Bruksanvisning
- Deutsch: Yamaha YPC-1 Bedienungsanleitung
- English: Yamaha YPC-1 Owner's manual
- Nederlands: Yamaha YPC-1 de handleiding
- română: Yamaha YPC-1 Manualul proprietarului