Yamaha YSP-4300 El kitabı

Digital Sound Projector™

Owner’s Manual

English

for Europe, Asia, Africa, Oceania,

and Latin America

2 En

What you can do with this unit

Make sure you read precaution in “Safety and Accessory Information” (separate booklet) carefully before using this unit.

Audio/video device

TV Blu-ray disc player

Preparation

Installing the unit

Connections/Basic settings

Connecting a satellite/

cable TV tuner

Connecting a Blu-ray

disc player

Operating this unit using a TV’s

remote control (HDMI control)

Playback

Basic operation for playback

Various functions

HDMI control (link) function TV remote repeater function

UniVolume IntelliBeam

System memory Eco function

p. 11

p. 19 p. 18

p. 30

p. 32

p. 30 p. 12

p. 40 p. 23

p. 28 p. 41

3 En

Game console

iPod or USB device

over a USB

connection

(YSP-4300 only)

iPod or computer

over a wireless

connection

FM tuning

(YSP-4300 only)

Preparing the remote control

Connecting a TV

Connecting a game

console

Connecting an indoor

FM antenna

Setting appropriate surround effects automatically (IntelliBeam)

Playing an iPod or

USB device

Playing an iPod or

computer

FM tuning

(YSP-4300 only)

CINEMA DSP Compressed Music Enhancer

Target playback Wireless playback for an iPod or computer

Playback for an iPod or USB device over a

USB connection (YSP-4300 only)

FM tuner (YSP-4300 only)

p. 16

p. 18

p. 19 p. 20

p. 23

p. 50 p. 50 p. 44

p. 34 p. 33

p. 39 p. 50

p. 50 p. 44

4 En

Contents

PREPARATION

Controls and functions...............................................5

Center unit front panel (front, top)........................................... 5

Center unit rear panel (back) .................................................. 6

Subwoofer rear panel (back)................................................... 7

Front panel display.................................................................. 8

Remote control........................................................................ 9

Installation .................................................................11

Recommended installation.................................................... 11

Conditions that make it difficult for sound beams to achieve

surround sound ..................................................................... 11

Enjoying surround effects regardless of conditions

(My Surround)....................................................................... 12

If the TV remote control does not work properly after the center

unit is installed (TV Remote Repeater function) ................... 12

If the center unit cannot be installed on a TV stand

(increasing the height of the center unit)............................... 12

Positioning the subwoofer on its side.................................... 13

Installing this unit .................................................................. 14

Preparing remote control ..............................................16

Installing the batteries........................................................... 16

Operation range .................................................................... 16

Connections ..............................................................17

Connecting a TV and a Blu-ray disc player...................18

Connecting a game console or

satellite/cable TV tuner .................................................19

Connecting the FM antenna (YSP-4300 only) ..............20

Connecting the wireless subwoofer ..............................20

Initial settings............................................................21

Establishing a wireless connection ...............................21

Group IDs.............................................................................. 21

Displaying the menu screen on the TV .........................21

Selecting the language for menu display ......................22

Auto setup for appropriate surround effects

(IntelliBeam)..................................................................23

Installing the IntelliBeam microphone ................................... 23

Using AUTO SETUP (IntelliBeam)........................................ 24

Saving this unit’s settings to system memory ....................... 28

Operating the unit by TV’s remote control

(HDMI control)...............................................................30

PLAYBACK

Playback features......................................................32

Basic operation for playback.........................................32

Enjoying sound based on your preference ...................33

Switching between surround playback, stereo playback, and

target playback modes.......................................................... 33

Playing back digitally compressed formats (MP3, WMA, etc.)

with enriched sound (Compressed Music Enhancer) ........... 33

Adjust volume for each channel............................................ 33

Enjoying realistic surround sounds (CINEMA DSP) ............. 34

Changing the audio output method for surround playback ... 36

Setting the surround decoder................................................ 38

Delivering sound to a specified location

(Target playback mode)........................................................ 39

Using useful features ....................................................40

Automatic volume level adjustment (UniVolume) ................. 40

Saving energy with the Eco function..................................... 41

Switching information displayed in the front panel display.... 41

Settings each input source (Option menu)............................ 42

FM tuning (YSP-4300 only)...........................................44

Tuning into the desired FM station (Frequency tuning) ........ 44

Receiving weak signal ...........................................................45

Registering FM stations and tuning in (Preset tuning)...........45

Displaying the Radio Data System information

(Europe model only) ..............................................................48

Playing music stored on an iPod or computer

over a wireless connection........................................... 50

Playing music stored on an iPod or USB device

over a USB connection (YSP-4300 only) ..................... 50

Connecting an iPod ...............................................................50

Operating an iPod via the TV screen.....................................51

Using the iPod to control operation .......................................54

Charging the iPod..................................................................55

Connecting a USB device......................................................56

Operating a USB device via the TV screen ...........................57

SETTINGS

Setup menu............................................................... 60

Setting the setup menu ................................................ 60

Setup menu list ............................................................ 61

BEAM settings.............................................................. 62

HORIZONTAL ANGLE ..........................................................62

BEAM TRAVEL LENGTH......................................................62

FOCAL LENGTH ...................................................................62

IMAGE LOCATION................................................................63

CHANNEL OUT.....................................................................63

SOUND settings........................................................... 64

SPEAKER LEVEL .................................................................64

Adaptive DRC........................................................................64

DYNAMIC RANGE ................................................................65

Dolby PLIIx PARAMETER.....................................................65

HDMI setup .................................................................. 65

HDMI CONTROL...................................................................65

HDMI AUDIO OUT.................................................................65

TV INPUT ..............................................................................65

AirWired settings .......................................................... 66

iPod INTERLOCK..................................................................66

GROUP ID.............................................................................66

DISPLAY settings......................................................... 67

DIMMER ................................................................................67

OSD LANGUAGE ..................................................................67

DISTANCE UNIT ...................................................................67

INFORMATION settings............................................... 67

AUDIO ...................................................................................67

VIDEO ...................................................................................67

SYSTEM................................................................................67

Advanced setup........................................................ 68

TROUBLESHOOTING

Troubleshooting ....................................................... 70

General..................................................................................70

FM tuner (YSP-4300 only).....................................................72

USB device (YSP-4300 only) ................................................72

Remote control ......................................................................72

Messages .................................................................. 73

iPod (when connected via USB jack)/

USB device (YSP-4300 only) ................................................73

APPENDIX

Glossary.................................................................... 74

Specifications........................................................... 76

Available signal information ......................................... 78

Index.......................................................................... 79

About this manual

• In this manual, operations that can be performed using either the front panel keys or the remote control are explained using the

remote control.

• In this manual, iPod(s), iPhone(s), and iPad(s) are hereafter referred to collectively as iPod(s).

•

y indicates a tip for your operation.

• Notes contain important information and operating instructions.

• In this manual, the YSP-CU4300 center unit is used for illustrative purposes. Illustrations for both the YSP-CU4300 and

YSP-CU3300 are provided where necessary.

5 En

PREPARATION PLAYBACK SETTINGS

TROUBLESHOOTING

APPENDIX

PREPARATION

Controls and functions

1 Remote control sensor

Receives infrared signals from the remote control (☞p. 9).

2 Remote control sensor of a TV

Receives infrared signals from the TV remote control when

the TV Remote Repeater function is enabled (☞p. 12).

3 Wireless module

Receives and sends wireless signals. Do not place metal

objects in front of the wireless module as they may interfere

with the wireless module’s ability to receive and send

wireless signals.

4 Front panel display

Shows information about the operational status of this unit

(☞p. 8).

5 USB jack (YSP-4300 only)

Enables connection of a USB device (☞p. 50, 56).

6 SURROUND indicator

Lights up according to the input signal.

7 STATUS indicator

Lights up when the power is turned on, and goes off in the

standby mode.

8 INPUT key

Selects the playback component (☞p. 32).

9 VOLUME (+/-) key

Adjusts the volume of the unit (☞p. 32).

0 key

Turns on the unit or set it to the standby mode.

Center unit front panel (front, top)

12 3 4 5 67

890

YSP-CU4300

467

890

12 3

YSP-CU3300

Displayed

color

Input signal

Blue Following surround audio signal formats:

Dolby TrueHD, Dolby Digital Plus, DTS-HD

Master Audio, DTS-HD High Resolution,

Multi-channel Linear PCM

Orange Surround audio signal other than above

Off Stereo/monaural audio signal or no signal

In the standby mode, this unit consumes a small amount of

power in order to search for HDMI signals or to receive

infrared signals from the remote control.

Note

Controls and functions

6 En

1 FM ANTENNA jack (YSP-4300 only)

Connect an FM antenna (☞p. 20).

2 INTELLIBEAM MIC jack

Connect the supplied IntelliBeam microphone (☞p. 24).

3 INPUT ANALOG L/R jacks

For connecting analog cable to the external components

(☞p. 19).

4 AUX INPUT DIGITAL jack

For connecting a coaxial digital audio cable to the external

components (☞p. 19).

5 IR IN

1)

/OUT jacks

Control expansion jacks for commercial use only.

6 HDMI OUT (ARC) jack

For connecting an HDMI compatible TV and monitor

(☞p. 18).

7 HDMI IN jacks

For connecting HDMI compatible Blu-ray disc player,

satellite and cable TV tuner and game console (☞p. 18, 19).

8 RS-232C terminal

A control expansion terminal for commercial use only.

9 INPUT DIGITAL TV/OPTICAL jacks

For connecting an optical cable to the external components

(☞p. 18, 19).

0 TV Remote Repeater

Receives signals from a TV remote control via the front of

the center unit and transmits those signals to the TV when the

center unit obstructs the remote control sensor on the TV

(☞p. 12).

a Power cable

For connecting to an AC wall outlet (☞p. 18).

Center unit rear panel (back)

12 3 54

6789

0A

Only for Europe and China models

1) y

Controls and functions

7 En

PREPARATION PLAYBACK SETTINGS

TROUBLESHOOTING

APPENDIX

1 Group ID switches

When the center unit and subwoofer are connected

wirelessly, sound is output from the subwoofer (AirWired).

For a wireless connection, use the same group ID as the

center unit and YIT-W12TX (☞p. 20).

2 LINK indicator

Shows wireless connection status (☞p. 21).

3 Heat discharge unit

Discharges heat generated inside the subwoofer. Do not

cover the heat discharge unit.

4 Power cable

For connecting to an AC wall outlet (☞p. 20).

Subwoofer rear panel (back)

A

B

C

1

2

3

LINK

A

B

C

1

2

3

LINK

1

2

4

3

Controls and functions

8 En

1 Playback indicators (YSP-4300 only)

Lights while music stored on an iPod or USB device

connected to the USB jack is playing (☞p. 50, 56).

2 TARGET indicator

Lights when target playback mode enabled (☞p. 39).

3 Tuner indicators (YSP-4300 only)

Lights up when this unit is tuned into an FM station

(☞p. 44).

4 REPEATER indicator

Lights when the TV Remote Repeater function is enabled

(☞p. 10).

5 Wireless indicators

TX Lights while the connection to the subwoofer is being

established (☞p. 20).

RX Lights while the connection to YIT-W12TX is being

established. For details of YIT-W12TX, refer to

“Safety and Accessory Information” (separate

booklet).

6 VOL indicator

Indicates the current volume level (☞p. 32).

7 HDMI indicator

Lights up when HDMI signals are input.

8 CINEMA DSP indicator

Lights up when a sound field program is selected (☞p. 34).

9 UNIVOLUME indicator

Lights up when the UniVolume function is enabled (☞p. 40).

0 Radio Data System indicators (Europe model

only)

Lights according to the current Radio Data System status

(☞p. 48).

a ENHANCER indicator

Lights up when the Compressed Music Enhancer function is

enabled (☞p. 33).

b Multi information display

Display playback device input source and surround

information (☞p. 41). Displays settings and information as

alphanumeric characters.

Front panel display

1)

12 3 45 6

789

0A B

Note that the front panel display turns off when the Eco function is

enabled and remains off unless an operation is performed.

1) y

Controls and functions

9 En

PREPARATION PLAYBACK SETTINGS

TROUBLESHOOTING

APPENDIX

1 BEAM key

Switches the sound beam output method (☞p. 37).

2 ENHANCER key

Turns Compressed Music Enhancer to on or off (☞p. 33).

3 Input selector keys

Select the playback component (☞p. 32).

4 CINEMA DSP program keys

When playback is in surround playback mode, select the

CINEMA DSP programs (☞p. 34).

5 SURROUND key

Switches to surround playback mode (☞p. 34).

6 S/T/W/X keys, ENTER key

Change the setting (☞p. 60).

7 SETUP key

Displays the setup menu (☞p. 60).

8 OPTION key

Displays the option menu for each input source (☞p. 42).

9 TARGET key

Switches to target playback mode (☞p. 39).

0 SUBWOOFER (+/-) key

Adjusts the volume of the subwoofer.

Remote control

1

I

H

J

K

L

M

N

O

P

Q

2

3

4

5

C

6

7

8

9

0

A

B

E

F

G

D

Infrared signal transmitter

O

P

E

YSP-3300

Controls and functions

10 En

a MUTE key

Mute the sound (☞p. 32).

b SYSTEM MEMORY keys

Saves IntelliBeam measurements, speaker volume, and other

settings (☞p. 28).

c FM key (YSP-4300 only)

Switches this unit’s input source to FM radio.

d Tuner operation keys (YSP-4300 only)

Press to select or register an FM station (☞p. 44).

e CH LEVEL key

Adjusts the volume balance during playback (☞p. 33).

f USB key (YSP-4300 only)

Switches this unit’s input source to USB (☞p. 50).

g Playback operation keys (YSP-4300 only)

Perform playback operations for music stored on an iPod or

USB device (☞p. 50).

h Transmission indicator

Lights with operation using this unit’s remote control.

i key

Turns on the unit or set it to the standby mode (☞p. 32).

j STEREO key

Switches to stereo playback mode (☞p. 33).

k RETURN key

Returns to the previous menu screen.

l INFO key

Switches the information display on the front panel as

follows.

• Input: Input name

• Beam: Beam mode setting (stereo, beam stereo, target, or

surround playback mode)

• Decoder: Sound signal decoder currently selected

• Cinema DSP: Sound field program of CINEMA DSP

(only in surround playback mode)

Information displayed varies according to the selected input

source (☞p. 41, 53, 55, 58).

This key is also used to select a desired Radio Data System

display mode (Europe model only) (☞p. 48).

m UNIVOLUME key

Turns the UniVolume function on or off (☞p. 40).

n VOLUME (+/-) key

Adjusts the volume of the unit (☞p. 32).

o ECO key

Turns the Eco function on or off (☞p. 41).

p REMOTE REPEATER key

Turns the TV Remote Repeater function on or off (☞p. 12).

q iPod CONTROL key (YSP-4300 only)

Press to display the iPod browse/playback screen on the TV

(☞p. 53).

Demo mode

This unit outputs sound beam down-mixed to 1 channel

moving horizontally to right and left. By this function, you

can feel how sound beam is output from this unit.

To activate Demo mode:

1 Press the TARGET key on the remote control.

2 Press the CINEMA DSP OFF key.

“AUTO DEMO” is shown in the front panel display when

demo mode starts.

To exit demo mode, press the CINEMA DSP OFF key

again. The display returns to target playback mode display.

11 En

PREPARATION PLAYBACK SETTINGS

TROUBLESHOOTING

APPENDIX

Installation

To achieve desired surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound

waves, referred to as “sound beam(s)” in this manual (☞p. 14). Depending on the location where the unit is installed, it may be easier to

connect external devices such as a TV first. See “Connections” (☞p. 17).

Some TVs have sensors such as the motion sensor or signal transmitter for 3D glasses in front. Installing the center unit may interrupt

the sensors or signal transmitter from functioning. Set the center unit away from your TV.

Center unit

• Install the center unit in the center of the left and right walls.

• Place the center unit on a TV stand in front of the TV.

Use the TV Remote Repeater function if the center unit

obstructs the remote control sensor on the TV (☞p. 12).

Increase the height of the center unit if the TV stand is too high

for center unit installation (☞p. 12).

• The listening position (such as sofa, etc.) should be located at

the front of the center unit.

• The distance between the listening position and the center unit

should be more than 1.8 m.

• This unit can be mounted on a wall using WALL MOUNT

BRACKET SPM-K20 (option). Refer to the SPM-K20 Install

Manual and SPM-K20 Information for YSP-CU4300/

YSP-CU3300.

Subwoofer

• To prevent sound reflecting off of walls, angle the subwoofer

slightly toward the center of the room.

• When installing the subwoofer on a rack, be sure the rack is

strong enough to support the subwoofer and that it leaves

sufficient space for heat discharge.

• The center unit and subwoofer communicate wirelessly.

Subwoofer performance may be affected if the subwoofer is

placed on a metal rack, or if there is a metal plate between the

subwoofer and the center unit.

• The subwoofer can also be placed on its side (☞p. 13).

This unit creates surround sound by reflecting projected sound beams off the walls of your listening room. The surround sound effects

produced by this unit may not be sufficient when this unit is installed in the following locations.

• Rooms with walls inadequate for reflecting sound beams

• Rooms with acoustically absorbent walls

• Rooms with measurements outside the following range:

W (3 to 7 m) × H (2 to 3.5 m) × D (3 to 7 m)

• Rooms with less than 1.8 m from the listening position to this

unit

• Rooms where objects such as furniture are likely to obstruct

the path of sound beams

• Rooms where the listening position is close to the walls

• Rooms where the listening position is not in front of this unit

Recommended installation

Notes

• This unit requires sufficient space for heat discharge.

– A minimum of 5 cm above and behind and 1 cm to the sides of the center unit

– A minimum of 20 cm above, behind, and to the sides of the subwoofer

Do not cover the subwoofer heat discharge unit on the back of the subwoofer.

• Be sure to install this unit where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.

• When using a cathode-ray tube (CRT) TV, do not install this unit directly above your TV.

• If the picture on your TV screen becomes blurred or distorted, we recommend moving this unit away from your TV.

Center unit Subwoofer

Conditions that make it difficult for sound beams to achieve surround sound

Installation

12 En

The My Surround function creates rich surround sound effects in rooms with less than optimal surround sound conditions (☞p. 11). See

“Changing the audio output method for surround playback” (☞p. 36, 37) for more information.

The TV may not respond to commands from

its remote control if the center unit obstructs

the remote control sensor on the TV. Should

this occur, press the REMOTE

REPEATER key on this unit’s remote

control more than 3 seconds to set the TV

Remote Repeater function to enable. The

REPEATER indicator on the front panel

display will light.

When the TV remote control is aimed at the

center unit’s remote control sensor, the TV

Remote Repeater on the back of this unit

transmits signals from the TV remote control

to the TV.

Signals from the TV remote control can be transmitted to the TV while this unit is in standby mode.

This function can be used while the TV remote control is using infrared signals.

In most cases, the center unit can be placed on a TV stand. The supplied spacers can be attached to increase the height of the unit if

necessary. Attach both the left and right spacers to the unit.

Removing the spacers

Pull the spacers straight up.

Enjoying surround effects regardless of conditions (My Surround)

If the TV remote control does not work properly after the center unit is installed (TV Remote

Repeater function)

Note

If the center unit cannot be installed on a TV stand (increasing the height of the center unit)

TV remote control

sensor

TV Remote Repeater

TV remote control

Align the protrusions on the back of the spacer with the

mounting holes on the bottom of the center unit and press

the spacer firmly into place.

Spacer

Protrusions

Mounting holes

Bottom of the center unit

Pull the spacer straight up.

Installation

13 En

PREPARATION PLAYBACK SETTINGS

TROUBLESHOOTING

APPENDIX

The subwoofer can be laid on its side when positioned on a rack.

Positioning the subwoofer on its side

Removing the legs

and sheets

Turn clockwise

Turn counterclockwise

Attaching the legs

and sheets

Leg

Sheet

Installation

14 En

This unit outputs sound beam as shown in the illustrations below. Install this unit where there are no obstacles such as furniture

obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved.

You may install this unit in parallel with the wall or in the corner.

Parallel installation

Install this unit as close to the exact center of the wall as possible.

Ideal installation condition

Install this unit as close to the exact front of your normal listening position as possible.

The distance between listening position and the unit should be more than 1.8 m.

Installing this unit

Parallel installation

Install this unit in the exact center of the wall when it is measured

from the left and right corners.

Corner installation

Install this unit in the corner at a 40° to 50° angle from the

adjacent walls.

Objects, such as

furniture

40° to 50°

Parallel installation

(with 5Beam)

Corner installation

(with Stereo+3Beam)

Objects, such as furniture

More

than

1.8 m

More

than

1.8 m

Installation

15 En

PREPARATION PLAYBACK SETTINGS

TROUBLESHOOTING

APPENDIX

Installing in a non-square room

Install this unit so that the sound beams can be reflected off the walls.

Example for installing the unit in living room

Irregularly shaped rooms with solid walls on all side

Irregularly shaped rooms that are open to a hallway on one side

• As sound beams normally pass through tables, tables are not

obstacles. And a cupboard installed facing the wall reflects

sounds.

• In a case of the listening room as shown in the right illustration,

adjusting the position of the right channel after AUTO SETUP

(☞p. 23) enables to achieve more desired surround sound

effects (☞p. 63).

• As the curtains absorb sounds, the sound features of the

listening room is different from the case with the curtain opened

and the case with the curtain closed. Using saving settings

function enables to save the best settings for each case of

listening room (☞p. 28).

Objects, such as

furniture

Installation

16 En

Before installing batteries or using the remote control, be sure to read battery and remote control precautions in “Safety and Accessory

Information” (separate booklet).

Preparing remote control

Installing the batteries

Battery × 2

(AAA, R03, UM-4)

Pull up on the

latch to release

the cover

Insert the

protrusions

into the slots

and close the

cover

Operation range

Within 6 m

17 En

PREPARATION PLAYBACK SETTINGS

TROUBLESHOOTING

APPENDIX

Connections

When external devices such as a TV, Blu-ray disc player, and/or game console are connected, audio

and video signals are transmitted as shown below.

Audio connection

Video connection

Audio and video connection

This unit: Plays audio from TV broadcasts, Blu-ray discs, etc.

Game console

(HDMI compatible)

Satellite and cable TV tuner

(not HDMI compatible)

TV: Plays video from TV

broadcasts, Blu-ray disc

player, etc.

Blu-ray disc player

HDMI cable

Optical cable

Use to connect a TV that does not

support audio return channel

(ARC) to this unit (☞p. 18).

Composite video cable

Optical cable

Connections

18 En

For the cable connection, follow the procedure below.

Connecting a TV and a Blu-ray disc player

1

HDMI cable (optional)

Input the digital audio/video signals

of the Blu-ray disc player to this unit.

2

HDMI cable (optional)

The digital video of the Blu-ray disc

player is reflected on TV.

3

Optical cable (supplied)

Play back digital sounds of TV on

this unit.

• Do not connect the power cable until all connections are completed.

• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or jack.

HDMI INPUT

123

HDMI

OUTPUT

OPTICAL

OUTPUT

To AC wall outlet

Blu-ray disc player

1. Remove the cap

2. Check the direction of

the plug

TV

Video signals

Audio signals

1

2

3

1)

Audio return channel (ARC) supported TV

• Connect an HDMI cable to the audio return channel supported jack

(the jack with “ARC” indicated) on TV. In this case, you do not need

to connect an optical cable.

• Activate the HDMI control function of this unit so as to activate the

audio return channel (ARC) (☞p. 65).

What is audio return channel (ARC)?

A function transmits digital audio signal output from TV to this unit

through an HDMI cable. By this function, an optical cable to connect TV

and this unit is not needed.

1) y

Connections

19 En

PREPARATION PLAYBACK SETTINGS

TROUBLESHOOTING

APPENDIX

Connecting a game console or satellite/cable TV tuner

External device (example) Connecting cable

HDMI compatible

1 Satellite/cable TV tuner

HDMI cable (optional)

2 Game console

HDMI cable (optional)

3 Game console

HDMI cable (optional)

not HDMI compatible

4 Satellite/cable TV tuner

Optical cable (supplied)

Composite video cable (optional)

5 Game console

RCA stereo cable (optional)

Composite video cable (optional)

HDMI

OUTPUT

HDMI

OUTPUT

HDMI

OUTPUT

OPTICAL

OUTPUT

VIDEO

OUTPUT

VIDEO

INPUT

VIDEO

INPUT

VIDEO

OUTPUT

ANALOG

OUTPUT

RL

Video signals

Audio signals

TV

1

4

2 3

5

To AC wall outlet

2)

To connect a device with an AUX output jack, connect its AUX output

jack to the AUX INPUT DIGITAL (coaxial) jack on this unit via a

commercial coaxial digital audio cable.

2) y

Connections

20 En

Connect the supplied FM antenna via the FM ANTENNA jack.

To connect the subwoofer (NS-WSW160) to the center unit

wirelessly (AirWired), the same group ID must be assigned to the

center unit and subwoofer. The default group ID for both

components is A1, enabling wireless connection by simply

plugging the subwoofer's power cable into an electrical outlet.

When using the transmitter (YIT-W12TX)

1)

, the same group ID

must be assigned to the center unit and subwoofer. The default

group ID of YIT-W12TX is A1.

The LINK indicator lights when the subwoofer is on and the

subwoofer and center unit are connected wirelessly.

When the center unit enters standby mode, the subwoofer and

LINK indicator turn off.

Connecting the FM antenna (YSP-4300 only)

Connecting the wireless subwoofer

FM antenna

y Tip

See page 21 for more information on group ID.

A

B

C

1

2

3

LINK

A

B

C

1

2

3

LINK

Group ID switches

LINK indicator

Blinks: Establishing

connection

Lights: Connection

established

To AC wall outlet

For details of YIT-W12TX, refer to “Safety and Accessory Information”

(separate booklet).

1) y

Sayfa yükleniyor...

Yamaha YSP-4300 El kitabı

Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:

Yamaha YSP-4300 El kitabı

diğer dillerde

İlgili makaleler