Nubia NX669J-S Kullanici rehberi

English | Quick Start Guide

Español | Guía Rápida

Deutsch | Kurzanleitung

Français | Guide de Démarrage Rapide

Italiano | Guida Rapida

Türkçe | Hızlı Başlangıç Kılavuzu

日本語｜クイックスタートガイド

   |  

Русский | Руководство по быстромузапуску

Polski | Skrócona instrukcja obsługi

한국어|빠른 입문 안내

Suomi | Pikaopas

1

13

16

19

22

25

27

31

34

37

40

43

Legal notice

Copyright Statement

All the copyrights of this document herein belong to Nubia

Technology Co., Ltd. Without the written permission of copyright

owner, no part of this publication may be excerpted, reproduced,

translated by any person or entity in any form or by any means.

This document is subject to change without prior notice.

Nubia Technology Co., Ltd. keeps the right to make the final

explanation to this document.

Trademarks

Android is a trademark of Google, Inc.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing

Limited. DTS, the Symbol, & DTS and the Symbol together are

registered trademarks or trademarks of DTS, Inc. in the United

All other trademarks remain the property of their respective

owners.

Statement of Third-party Applications

During the installation process of some third-party applications,

the issues of repeated restart or abnormal use of software might

be caused by incompatibility of the third-party applications,

rather than the phone itself.

Please download your software upgrade packages from the

reliable official website.

The installation of a third-party ROM or non-official operating

system might bring safety risks and security threats. Nubia

Technology Co., Ltd. shall not be liable for these risks and threats

caused by upgrade of the operating system.

1

Your phone at a glance

English | Quick Start Guide

1

11

13

15

17

19

21

23

Light/Proximity

Sensor

Card Tray

Touch Screen

USB Type-C Port

Fingerprint

Sensor

Rear Camera

Flash

Headphone

Jack

Shoulder

Trigger(L)

Shoulder

Trigger(R)

Game Boost

Mode

Air Inlet

Air Outlet

Noise-

reduction MIC

Front Camera

Volume

Buttons

Receiver

Game MIC

Power Button

Speaker

Microphone

2

Inserting the SIM card

1. Insert the end of the eject tool into the hole of the card tray

and press firmly until the tray pops out.

2. Put one or two nano-SIM cards into the tray.

3. Push the card tray back into the phone.

Note

Dimensions of a nano-SIM card: 9 mm*12 mm.

Charging the battery

Connect the phone to the power outlet using the included USB

cable and power adapter.

Note

 Your phone and power adapter might heat up while charging.

 Use other USB cable or power adapter might decrease the life

span of your phone or cause fire, explosion and other hazards.

The illustrations of products and accessories in the user guide are

all schematic diagrams and are for reference only.

Due to product updates and upgrades, the actual product and the

schematic diagram may be slightly different, please refer to the

actual product.

3

Powering On/Off Phone

Make sure the battery is charged before powering on.

 Press and hold the Power key to turn on your phone.

 To power off, press and hold the Power key and touch ‘Swipe

to power off ’.

Waking Up Your Phone

Your phone automatically goes into sleep mode when it is not in

use for some time. The display is turned off to save power and the

keys are locked to prevent accidental operations.

You can wake up your phone by turning on the display and

unlocking the keys.

1. Press the Power key to turn the screen on.

2. Swipe up on the screen.

Note

If you have set an unlock pattern, a PIN, or a password for your

phone, you’ll need to draw the pattern, or enter the PIN/password

to unlock the phone.

4

Disposal of your old phone

 When the wheelie bin symbol is attached to a

product, it means the product is covered by the

European Directive 2012/19/EU.

 All electrical and electronic products should be disposed of

separately from normal household waste via designated

collection points provided by government or local authorities.

 The correct disposal of electrical and electronic products will

help protect the environment and human health.

Declaration of RoHS 2.0 Compliance

We’re determined to reduce the impact we have on the

environment and take responsibility for the earth we live on.

So this document allows us to formally declare that the

NX669J-S, manufactured by Nubia Technology Co., Ltd., fully

complies with the European Parliament’s RoHS (Restriction

of Hazardous Substances) 2.0 Directive 2011/65/EU, with

respect to all the following substances:

(1) Lead (Pb)

(2) Mercury (Hg)

(3) Cadmium (Cd)

(4) Hexavalent Chromium (Cr (VI))

(5) Polybrominated biphenyl (PBB)

(6) Polybrominated diphenyl ether (PBDE)

(7) Di(2-ethylhexyl) phthalate(DEHP)

(8) Dibutyl phthalate (DBP)

(9) Benzyl butyl phthalate (BBP)

(10) Diisobutyl phthalate(DIBP)

Our compliance is witnessed by written declaration from our

suppliers. This confirms that any potential trace

contamination levels of the substances listed above are

below the maximum level set by EU 2011/65/EU, or are

exempt due to their application.

The NX669J-S manufactured by Nubia Technology Co., Ltd.

meets all the requirements of EU 2011/65/EU.

5

EU certified frequency band

Frequency Band

Maximum output power(dBm)

GSM900

33.50

DCS1800

31.00

WCDMA Band I

23.50

WCDMA Band VIII

24.50

LTE Band 1

23.00

LTE Band 3

23.50

LTE Band 7

23.50

LTE Band 8

24.00

LTE Band 20

24.00

LTE Band 28

24.00

LTE Band 34

23.50

LTE Band 38

23.50

LTE Band 40

23.50

NR N41

24.00

NR N78

24.00

NSA EN_DC

DC_3_N41

24.00

DC_20_N41

24.00

DC_28_N41

24.00

DC_40_N41

24.00

DC_1_N78

24.00

DC_3_N78

24.00

DC_7_N78

24.00

DC_8_N78

24.00

DC_20_N78

24.00

DC_28_N78

24.00

DC_38_N78

24.00

DC_40_N78

24.00

WLAN

Standard

Frequency

EIRP Power(dBm)

WIFI 2.4G

2.4~2.4835GHz

16.00

WIFI 5G

5.15~5.725GHz

14.00

5.725~5.825GHz

14.00

6

BLUETOOTH

Bluetooth version

EIRP Power(dBm)

EDR

11.00

LE

9.00

NFC

Frequency

13.56MHz

-41.88 dBμA/m at 10m

Hardware and software

 The certified hardware version of your phone is

NX669S_V1AMB.

 The certified software version of your phone is NX669S_V1

EUCommon_V4.01.



EU Declaration of Conformity (DoC)

Hereby, Nubia Technology Co., Ltd. declares

that this device is in conformity with the

Radio Equipment Directive: 2014 / 53 / EU.

For the declaration of conformity, visit

http://www.nubia.com/en/support.php?a=download.

Hereby, Nubia Technology Co., Ltd. declares

that this device is in compliance with the

essential requirements and other relevant

provisions of Direrctive and Radio Equipment Regulations

2017.

BE

BG

CZ

DK

DE

EE

IE

EL

ES

FR

HR

IT

CY

LV

LT

LU

HU

MT

NL

AT

PL

PT

RO

SI

SK

FI

SE

UK

（NI）

7

The Wi-Fi function for this device is restricted to indoor use only

when operating in the 5150 MHz to 5350 MHz frequency range.

Manufacturer's EU Representative:

Nubia Technology Spain S.L.

address：Calle Goya 15, 1ª-Planta, Madrid, 28001

E-mail:support.eu@nubia.com

Safety warning

 To prevent possible hearing damage when

using a headset, do not use high volume for

long period.

 Use the earphone carefully. Excessive sound pressure from

headsets and headphones can cause hearing loss.

 Adapter shall be installed near the equipment and shall be

easily accessible.

 The phone's normal operating temperature is 0°C ~ 40°C. In

order to ensure the normal phone functions, do not use this

phone outside the temperature range.



Health and safety

The device meets international guidelines for exposure to

radio waves.

Your device is a radio transmitter and receiver. It’s designed

not to exceed the limits for exposure to radio waves

recommended by international guidelines. The guidelines

were developed by the International Commission on Non-

lonizing Radiation Protection (ICNIRP), an independent

technical standards body, and include margins designed to

assure the safety of all persons, regardless of age and

health. These guidelines use a unit of measurement known

as Specific Absorption Rate (SAR). The SAR limit for mobile

devices is 2.0 W/Kg (Head, Body-worn), 4.0 W/Kg

(Limbs) and the highest SAR value for this device when

tested for use at the head was 1.042 W/Kg, when tested for

use at the body-worn was 0.968 W/Kg and when tested for

use at the limbs was 1.703W/Kg.

In SAR measurement, the separation distance between the

8

phone and test device is 5mm.

As SAR is measured when the device is on its highest

transmitting power, the actual SAR of this device while

operating normally is typically below the levels shown

above. This is because the device automatically changes its

power level to ensure it only uses the minimum level

required to reach the network.

The World Health Organization has stated that present

scientific information does not indicate the need for any

special precautions for the use of mobile devices.

Important safety information

For your own health and safety, please follow the radio

frequency (RF) radiation exposure guidelines and keep your

phone no less than 5 mm away from your body.

Failure to do this could mean that your RF exposure exceeds

the guideline limits.

How to limit your radio frequency (RF) exposure

The World Health Organization (WHO) gives the following

advice to people who want to limit their exposure to RF

radiation…

Present scientific information does not indicate the need for

any special precautions for the use of mobile phones. If

individuals are concerned, they may choose to limit their own

or their children’s RF exposure by limiting the length of calls,

or using ‘hands-free’ devices to keep mobile phones away

from the head and body.

Further information on the subject can be obtained from the

World Health Organization website at

http://www.who.int/peh-emf WHO Fact sheet 193: June 2000.

1. The tests are carried out in accordance with IEC standard IEC 62209-2.

FCC Regulatory Compliance

 FCC Regulations:

This mobile phone has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

9

equipment generates, uses and can radiated radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for

help.

Caution:

Changes or modifications not expressly approved by Nubia

Technology Co., Ltd. for compliance could void the user‘s authority

to operate the equipment.

 RF exposure information (SAR)

This phone is designed and manufactured not to exceed the

emission limits for exposure to radio frequency (RF) energy set

by the Federal Communications Commission of the United States.

This device is complied with SAR for general population

/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had

been tested in accordance with the measurement methods and

procedures specified in IEEE1528.

The FCC has granted an Equipment Authorization for this model

phone with all reported SAR levels evaluated as in compliance

with the FCC RF exposure guidelines. SAR information on this

model phone is on file with the FCC and can be found under the

Display Grant section of www.fcc.gov/oet/ea/fccid after

searching on FCC ID: 2AHJO-NX669J-S.

The SAR limit set by the FCC is 1.6 W/Kg.

The highest reported SAR value for this device when using

against the head is less than 1.6 W/Kg, for usage near the body‐

worn is less than 1.6 W/Kg(1g‐10mm).

Body worn operation

10

SAR compliance for body-worn operation is based on a

separation distance of 10 mm between the unit and the human

body. Carry this device at least 10 mm away from your body to

ensure RF exposure level compliant or lower to the reported level.

Ensure that the device accessories, such as a device case and

device holster, are not composed of metal components. Keep the

device away from your body to meet the distance requirement.

 Hardware and software

The certified hardware version of your phone is

NX669J-S_V1AMB.

The certified software version of your phone is

NX669J-S_EUCommon_V3.05.

 FCC Caution.

§ 15.19 Labeling requirements.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

§ 15.21 Information to user.

Any Changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

§ 15.105 Information to the user.

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

11

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Legal notice

Copyright Statement

All the copyrights of this document herein belong to Nubia

Technology Co., Ltd. Without the written permission of

copyright owner, no part of this publication may be

excerpted, reproduced, translated by any person or entity in

any form or by any means.

This document is subject to change without prior notice.

Nubia Technology Co., Ltd. keeps the right to make the final

explanation to this document.

Trademarks

Android is a trademark of Google, Inc.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing Limited.

DTS, the Symbol, & DTS and the Symbol together, DTS:X, the

DTS:X logo, and DTS:X Ultra are registered trademarks or

trademarks of DTS, Inc. in the United States and/or other

All other trademarks remain the property of their respective

owners.

Statement of Third-party Applications

During the installation process of some third-party

applications, the issues of repeated restart or abnormal use

of software might be caused by incompatibility of the third-

party applications, rather than the phone itself.

Please download your software upgrade packages from the

12

reliable official website.

The installation of a third-party ROM or non-official

operating system might bring safety risks and security

threats. Nubia Technology Co., Ltd. shall not be liable for

these risks and threats caused by upgrade of the operating

system.

FCC Hearing-Ai d Compatibility (HAC)

Your phone is compliant with the FCC Hearing Aid Compatibility

requirements.

The FCC has adopted HAC rules for digital wireless phones. These

rules require certain phones to be tested and rated under the

American National Standard Institute (ANSI) C63.19-2011 hearing

aid compatibility standards. The ANSI standard for hearing aid

compatibility contains two types of ratings:

• M-Ratings: Rating for less radio frequency interference to

enable acoustic coupling with hearing aids.

Not all phones have been rated. A phone is considered hearing

aid compatible under FCC rules if it is rated M3 or M4. These

ratings are given on a scale from one to four, where four is the

most compatible.

WARNING: Cancer and Reproductive Harm -

www.P65Warnings.ca.gov.

13

Su teléfono de un vistazo

Salida de aire

Modo de

impulso del

juego

Flash

Sensores de luz /

proximidad

Teclas de

volumen

Sensor de

huellas dactilares

Auricular

Gatillo

(I)

Cámara frontal

Pantalla táctil

Gatillo

(d)

Bandeja

portatarjetas

Micrófono

reducción de

ruido

Micrófono de

juego

Entrada de aire

Cámaras trasera

Toma de auriculares

Puerto USB Tipo-C

Tecla de

encendido

Micrófono

Altavoz

Español | Guía Rápida

14

Inserción de la tarjeta SIM

1. Inserte el extremo de la herramienta de expulsión en el

orificio de la bandeja de la tarjeta y presione firmemente

hasta que la bandeja salte.

2. Coloque una o dos tarjetas nano-SIM en la bandeja.

3. Empuje la bandeja de la tarjeta de nuevo en el teléfono.

Note

Dimensiones de la tarjeta nano-SIM: 9 mm*12 mm.

Carga de la batería

Conecte el teléfono a la toma de corriente mediante el cable USB

incluido y el adaptador de corriente.

Nota

 Su teléfono y el adaptador de corriente podrían calentarse

durante la carga.

 El uso de otro cable USB o adaptador de corriente podría

acortar la vida útil de su teléfono o provocar un incendio,

explosión u otros peligros.

15

Encendido y apagado del teléfono

Asegúrese de que la batería esté cargada antes de

encenderlo.

Mantenga pulsada la tecla de encendido para encender el

teléfono.

Para apagar, mantenga presionada la tecla de encendido y

pulse "Deslizar para apagar".

Activando el teléfono

El teléfono se pasa automáticamente a modo de suspensión

cuando no se utiliza durante algún tiempo. La pantalla se apaga

para ahorrar energía y las teclas se bloquean para evitar

operaciones accidentales.

Puedes activar el teléfono encendiendo la pantalla y

desbloqueando las teclas.

1. Presione la tecla de encendido para encender la pantalla.

2. Deslice hacia arriba la pantalla.

Nota

Si ha establecido un patrón de desbloqueo, un PIN o una

contraseña para el teléfono, deberá dibujar el patrón o

introducir el PIN/contraseña para desbloquear el teléfono.

16

Ihr Telefon im Überblick

Blitzlicht

Randauslöser (L)

Touch-Bildschirm

USB Type-C Port

Licht‐/

Näherungs

sensor

Lautstärke-Tasten

Buttons

Fingerabdruck-

Sensor

Game Boost

Modus

Kartenfach

Geräuschunterdrückung

Luftauslass

Mikrofon

Lufteinlas

Rückkamer

Kopfhörer-Buchse

Randauslöser (R)

Frontkamera

Game MIK

Deutsch | Kurzanleitung

Lautsprecher

Ein-/Aus-Taste

Lautsprecher

17

Einsetzen und Entfernen der Sim-

karte

1. Stecken Sie das Kartenauswurf-Werkzeug in die Vertiefung

Ihrer Kartenschiene; drücken Sie es leicht hinein, um die

Schiene auszuwerfen.

2. Legen Sie eine oder beide Simkarten in das Fach.

3. Drücken Sie das Kartenfach wieder in das Telefon.

Hinweis

Die Maße einer Nano-SIM-Karte sind: 9mm*12mm.

Akku aufladen

Schließen Sie das Telefon mit dem mitgelieferten USB-Kabel

und Ladegerät an eine Steckdose an.

Hinweis

. Ihr Telefon und das Ladegerät können sich beim Laden

erhitzen.

. Die Verwendung eines anderen USB-Kabels oder

Ladegerätes können die Lebensdauer Ihres Telefons

eventuell verringern oder einen Brand, eine Explosion oder

andere Gefahren verursachen.

Sayfa yükleniyor ...

Nubia NX669J-S Kullanici rehberi

Nubia NX669J-S Kullanici rehberi

Diğer dillerde

Diğer Belgeler