Samsung HT-E5550 Kullanım kılavuzu

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

5.1CH Blu-ray™

Home Entertainment System

user manual

HT-E5550

|

2 English

Safety Information

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage”

inside the product that presents a risk of

electric shock or personal injury.

CAUTION:

TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

This symbol indicates important

instructions accompanying the product.

WARNING

• To reduce the risk of fire or electric shock, do

not expose this appliance to rain or moisture.

CAUTION

• Apparatus shall not be exposed to dripping or

splashing and no objects filled with liquids, such

as vases, shall be placed on the apparatus.

• The Mains plug is used as a disconnect device

and shall stay readily operable at any time.

• This apparatus shall always be connected

to an AC outlet with a protective grounding

connection.

• To disconnect the apparatus from the mains,

the plug must be pulled out from the mains

socket, therefore the mains plug shall be readily

operable.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS

1 LASER product.

Use of controls, adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

CAUTION

• INVISIBLE LASER RADIATION WHEN OPEN

AND INTERLOCKS DEFEATED, AVOID

EXPOSURE TO BEAM.

English 3

|

01 Safety Information

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on

a disc may reduce sound and

picture quality or cause skipping.

- Avoid touching the surface of a disc where

data has been recorded.

- Hold the disc by the edges so that fingerprints

will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a

disc, clean it with a mild detergent

diluted in water and wipe with a

soft cloth.

- When cleaning, wipe gently from the inside to

the outside of the disc.

- Disc Storage



Do not keep in direct sunlight.



Keep in a cool ventilated area.



Keep in a clean protection jacket and store

vertically.

Handling Cautions

• Do not expose this apparatus to dripping or

splashing. Do not put objects filled with liquids,

such as vases, on the apparatus.

• To turn this apparatus off completely, you must

pull the power plug out of the wall socket.

Consequently, the power plug must be easily

and readily accessible at all times.

• Do not touch the power plug with a wet hand.

It can cause an electric shock.

• Do not plug multiple electric devices into the

same wall socket. Ovedrloading a socket can

cause it to overheat, resulting in a fire.

• Maintenance of the Cabinet

- Before connecting other components to this

product, be sure to turn them off.

- If you move your product suddenly from a

cold place to a warm place, condensation

may occur on the operating parts and lens

and cause abnormal disc playback. If this

occurs, unplug the product, wait for two

hours, and then connect the plug to the

power outlet. Then, insert the disc, and try to

play back again.

• If the product makes an abnormal noise or

produces a burning smell or smoke, turn off

the power switch immediately and disconnect

the power plug from the wall outlet. Then,

contact the nearest customer service centre for

technical assistance. Do not use the product.

Using the product as it is may cause a fire or an

electric shock.

• To turn this apparatus off completely, you must

pull the power plug out of the wall socket.

Consequently, the power plug must be easily

and readily accessible at all times.

Using the 3D Function

IMPORTANT HEALTH AND SAFETY

INFORMATION FOR 3D PICTURES.

Read and understand the following safety

information before using the 3D function.

• Some viewers may experience discomfort while

viewing 3D TV such as dizziness, nausea, and

headaches.

If you experience any such symptom, stop

viewing 3D TV, remove the 3D Active Glasses,

and rest.

• Watching 3D images for an extended period of

time may cause eye strain. If you feel eye strain,

stop viewing 3D TV, remove your 3D Active

Glasses, and rest.

• A responsible adult should frequently check on

children who are using the 3D function.

If there are any reports of tired eyes, headaches,

dizziness, or nausea, have the child stop viewing

3D TV and rest.

• Do not use the 3D Active Glasses for other

purposes (such as general eyeglasses,

sunglasses, protective goggles, etc.)

|

4 English

Safety Information

• Do not use the 3D function or 3D Active Glasses

while walking or moving around. Using the 3D

function or 3D Active Glasses while moving

around may cause you to bump into objects,

trip, and/or fall, and cause serious injury.

• If you want to enjoy 3D content, connect a 3D

device (3D compliant AV receiver or TV) to the

product’s HDMI OUT port using a high-speed

HDMI cable. Put on 3D glasses before playing

the 3D content.

• The product outputs 3D signals only through

HDMI cable connected to the HDMI OUT port.

• As the video resolution in 3D play mode is fixed

according to the resolution of the original 3D

video, you can not change the resolution to your

preference.

• Some functions such as BD Wise, screen size

adjustment, and resolution adjustment may not

operate properly in 3D play mode.

• You must use a high-speed HDMI cable for

proper output of the 3D signal.

• Stay at least three times the width of the screen

from the TV when watching 3D images. For

example, if you have a 46 inch screen, stay 3.5

meters from the screen.

- Place the 3D video screen at eye level for the

best 3D picture.

• When the product is connected to some 3D

devices, the 3D effect may not function properly.

• This product does not convert 2D content into

3D.

• “Blu-ray 3D” and “Blu-ray 3D” logo are

trademarks of the Blu-ray Disc Association.

Copyright

manual may be reproduced or copied without the

prior written permission of Samsung Electronics

Co.,Ltd.

Licence

• Dolby and the double-D symbol are registered

trademarks of Dolby Laboratories.

• Manufactured under licence under U.S. Patent

Nos: 5,956,674; 5,974,380; 6,226,616;

6,487,535; 7,392,195; 7,272,567; 7,333,929;

7,212,872 & other U.S. and worldwide patents

issued & pending. DTS-HD, the Symbol, & DTS-

HD and the Symbol together are registered

trademarks & DTS-HD Master Audio | Essential

is a trademark of DTS, Inc. Product includes

•

ABOUT DIVX VIDEO: DivX® is a digital video

format created by DivX, LLC, a subsidiary of Rovi

Corporation. This is an official DivX Certified®

device that plays DivX video. Visit divx.com for

more information and software tools to convert

your files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX

Certified® device must be registered in order to

play purchased DivX Video-on-Demand (VOD)

movies. To obtain your registration code, locate

the DivX VOD section in your device setup

menu. Go to vod.divx.com for more information

on how to complete your registration.

DivX Certified® to play DivX® video up to HD

1080p, including premium content.

DivX®, DivX Certified® and associated logos

are trademarks of Rovi Corporation or its

subsidiaries and are used under licence.

Covered by one or more of the following U.S.

patents : 7,295,673; 7,460,668; 7,515,710;

7,519,274

English 5

|

01 Safety Information

• The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other

countries.

• Oracle and Java are registered trademarks of

Oracle and/or its affiliates. Other names may be

trademarks of their respective owners.

• This item incorporates copy protection

technology that is protected by U.S. patents

and other intellectual property rights of

Rovi Corporation. Reverse engineering and

disassembly are prohibited.

• Blu-ray Disc™, Blu-ray™, and the logos are

trademarks of Blu-ray Disc Association.

• iPad, iPhone, iPod, iPod classic, iPod nano,

iPod shuffle, and iPod touch are trademarks

of Apple Inc., registered in the U.S. and other

countries.

• This product uses Cinavia technology to

limit the use of unauthorized copies of some

commercially-produced film and videos and

their soundtracks. When a prohibited use of an

unauthorized copy is detected, a message will

be displayed and playback or copying will be

interrupted.

More information about Cinavia technology

is provided at the Cinavia Online Consumer

Information Centre at http://www.cinavia.com.

To request additional information about Cinavia

by mail, send a postcard with your mailing

address to: Cinavia Consumer Information

Centre, P.O. Box 86851, San Diego, CA, 92138,

USA.”

This product incorporates proprietary technology

under licence from Verance Corporation and is

protected by U.S. Patent 7,369,677 and other

U.S. and worldwide patents issued and pending

as well as copyright and trade secret protection

for certain aspects of such technology. Cinavia

is a trademark of Verance Corporation.

rights reserved by Verance. Reverse engineering

or disassembly is prohibited.

• Open Source Licence Notice

- In the case of using open source software,

Open Source Licences are available on the

product menu.

|

6 English

Contents

SAFETY INFORMATION

2 Warning

3 Disc Storage & Management

3 Handling Cautions

3 Using the 3D Function

4 Copyright

4 Licence

GETTING STARTED

7 Disk and Format Compatibility

8 Logos of Discs the product can play

11 Accessories

12 Front Panel

12 Rear Panel

13 Remote Control

CONNECTIONS

15 Attaching the Toroidal Ferrite Core to the

Power Cord of the Main Unit

15 Connecting the Speakers

16 Speaker Components

16 Installing the Speakers on the Tallboy

Stand

17 Connecting The Speakers

18 Connecting the Optional Wireless

Receiver Module

20 Connecting the FM Antenna

20 Connecting to an iPod/iPhone

20 Using a USB Cable

20 Using a Dock

21 Connecting to a TV

21

Method 1

Connecting to a TV with an

HDMI Cable - Best Quality (Recommended)

21

Method 2

Connecting to a TV with a

Video Cable - Good Quality

22 Connecting to External Devices

22

Method 1

HDMI IN : Connecting to an

External Component with an HDMI Cable

22

Method 2

OPTICAL : Connecting an

External Digital Audio Component

22

Method 3

AUX IN : Connecting an

External Analogue Component

23 Connecting to a Network Router

23 Wired Network

23 Wireless Network

SETTINGS

24 The Initial Settings Procedure

26 The Home Screen

26 Accessing the Settings Screen

27 Settings Menu Functions

32 Networks and the Internet

36 Upgrading Software

MEDIA PLAY

38 The AllShare Play Screen

39 Playing Files on a USB Storage Device or

iPod/iPhone

39 iPod/iPhone Models You Can Use with

This Product

40 The Function Screen

40 Playing Commercial Video Discs

40 Playing Commercial Audio Discs

41 Playing a Disc with User Recorded

Content

41 Using the AllShare Network Function

43 Controlling Video Playback

45 Controlling Music Playback

48 Playing Photo Contents

48 Using the Tools Menu when a File is

Highlighted

50 Listening to Radio

52 Using the Special Effects Remote Control

Buttons

NETWORK SERVICES

54 Using Smart Hub

56 BD-LIVE™

APPENDIX

57 Additional Information

63 Troubleshooting

66 Specifications

English 7

|

02 Getting Started

Getting Started

Disk and Format Compatibility

Disc types and contents your product can play

Media Disc Type Details

VIDEO

Blu-ray Disc

3D Blu-ray Disc

BD-ROM or BD-RE/-R disc recorded in the BD-RE format.

DVD-VIDEO, DVD-RW,

DVD-R, DVD+RW,

DVD+R

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been

recorded and finalised, or a USB storage media containing DivX, MKV, MP4

contents.

MUSIC

CD-RW/-R, DVD-RW/-R,

BD-RE/-R

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage

media containing MP3 or WMA contents.

PHOTO

CD-RW/-R, DVD-RW/-R,

BD-RE/-R

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage

media containing JPEG contents.

|

NOTE

|



The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.



If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.



Your product will not play content that has been recorded on a DVD-R at a bit rate that exceeds 10 Mbps.



Your product will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30 Mbps.



Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio

adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.



When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

Disc types your product cannot play

• HD DVD

• DVD-ROM/PD/MV-

Disc, etc

• DVD-RAM

• Super Audio CD

(except CD layer)

• DVD-RW(VR mode)

• CVD/CD-ROM/CDV/

CD-G/CD-I/LD

(CD-Gs play audio

only, not graphics.)

• 3.9 GB DVD-R Disc

for Authoring.

|

NOTE

|



This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow specific or

limited operation and provide only certain features during playback.

Please note that this is not a defect in the product.



Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc

formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the

manufacture of discs.



Please contact the SAMSUNG Customer Care Centre, if you have questions or encounter difficulty when playing Blu-ray Disc,

DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions.



Some commercial discs and DVD discs purchased outside your region may not play on this product.

|

8 English

Getting Started

Region Code

Both products and discs are coded by region.

These regional codes must match for a disc to

play. If the codes do not match, the disc will not

play.

The Region Number for this product is displayed

on the rear panel of the product.

Disc Type

Region

Code

Area

Blu-ray Disc

A

North America, Central America,

South America, Korea, Japan,

Taiwan, Hong Kong and South

East Asia.

B

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

C

India, China, Russia, Central and

South Asia.

DVD-VIDEO

1

The U.S., U.S. territories and

Canada

2

Europe, Japan, the Middle East,

Egypt, South Africa, Greenland

3

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

4

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

5

Russia, Eastern Europe, India,

most of Africa, North Korea,

Mongolia

6

China

|

NOTE

|



If the Region number of a Blu-ray Disc/DVDs does not

correspond to the Region number of this product, the

product cannot play the disc.

Logos of Discs the product can play

Blu-ray Disc 3D Blu-ray Disc

BD-LIVE Dolby

DTS DivX

PAL broadcast system in

U.K, France, Germany, etc.

Java

Supported Formats

Music File Support

File

Extension

Container

Audio

Codec

Support Range

*.mp3

MP3

MP3 -

*.wma

WMA

Compliant with

WMA version 10

* Sampling rates (in

kHz) - 8, 11, 16,

22, 32, 44.1, 48

* Bit rates - All bit

rates in the range

5kbps to 384kbps

English 9

|

02 Getting Started

Video File Support

File Extension Container Video Codec Resolution

Frame rate

(fps)

Bit rate

(Mbps)

Audio Codec

*.avi

AVI

DivX 3.11/4.x

/5.1/6.0

1920x1080 6 ~ 30 8

MP3

AC3

LPCM

DTS Core

H.264 BP/MP/HP 1920x1080 6 ~ 30 25

MPEG4 SP/ASP 1920x1080

6 ~ 30 8

*.mkv

MKV

DivX 3.11/4.x

/5.1/6.0

1920x1080

6 ~ 30 8

MP3

AC3

LPCM

DTS Core

H.264 BP/MP/HP 1920x1080

6 ~ 30 25

MPEG4 SP/ASP 1920x1080

6 ~ 30 8

*.asf

ASF

DivX 3.11/4.x

/5.1/6.0

1920x1080

6 ~ 30 8

MP3

AC3

LPCM

WMA

H.264 BP/MP/HP 1920x1080

6 ~ 30 25

MPEG4 SP/ASP 1920x1080

6 ~ 30 8

*.wmv

WMV (wmv9)

Window Media

Video v9

1920x1080

6 ~ 30 25 WMA

*.mp4

MP4

H.264 BP/MP/HP 1920x1080

6 ~ 30 25

MP3

AAC

MPEG4 SP/ASP 1920x1080

6 ~ 30 8

*.3gp

3GPP

H.264 BP/MP/HP 1920x1080

6 ~ 30 25

AAC

MPEG4 SP/ASP 1920x1080

6 ~ 30 8

*.vro

VRO

VOB

MPEG2 1920x1080

24/25/30 25

AC3

MPEG

LPCMMPEG1 1920x1080

24/25/30 25

*.mpg

*.mpeg

PS

MPEG1 1920x1080

24/25/30 25

AC3

MPEG

LPCM

AAC

MPEG2 1920x1080

24/25/30 25

H.264 1920x1080

6 ~ 30 25

*.ts

*.tp

*.trp

TS

MPEG2 1920x1080

24/25/30 25

AC3

AAC

MP3

DD+

H.264 1920x1080

6 ~ 30 25

VC1 1920x1080

6 ~ 30 25



Limitations

- Even when a file is encoded by a supported codec listed above, the file might not be played if its

content has a problem.

- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is

corrupted.

- Files having higher bit or frame rates than standard may stutter when played back.

|

10 English

Getting Started

- The Seek (skip) function is not available if the

file’s index table is damaged.

- When you playback a file remotely through a

network connection, video playback may stutter

depending on the network speed.



Video decoder

- Supports up to H.264 Level 4.1

- Does not support H.264 FMO/ASO/RS, VC1

SP/MP/AP L4 and AVCHD

- MPEG4 SP, ASP :

Below 1280 x 720 : 60 frames max

Above 1280 x 720 : 30 frames max

- Does not support GMC 2 or higher



Audio decoder

- Supports WMA 7, 8, 9 and STD

- Does not support WMA 9 PRO multi-channel

files if the number of channels is more than 2 or

the files require lossless audio decoding.

- Does not support WMA sampling rate of

22050Hz mono



Supported DivX subtitle file formats

*.ttxt, *.smi, *.srt, *.sub, *.txt

Notes on the USB connection

• Your product supports USB storage media,

MP3 players, digital cameras, and USB card

readers.

• The product does not support folder or file

names longer than 128 characters.

• Some USB/digital camera devices may not be

compatible with the product.

• Your product supports the FAT 16, FAT 32, and

NTFS files systems.

• Connect USB devices directly to the product’s

USB port. Connecting through a USB cable

may cause compatibility problems.

• Inserting more than one memory device into

a multi-card reader may cause the reader to

operate improperly.

• The product does not support the PTP protocol.

• Do not disconnect a USB device during a

“loading” process.

• The bigger the image resolution, the longer the

image takes to display.

• This product cannot play MP3 files with DRM

(Digital Rights Management) downloaded from

commercial sites.

• Your product only supports video that is under

30fps (frame rate).

• Your product only supports USB Mass Storage

Class (MSC) devices such as thumb drives and

USB HDD. (HUB is not supported.)

• Certain USB HDD Devices, multi-card readers

and thumb drives may not be compatible with

this product.

• If some USB devices require excessive power,

they may be limited by the circuit safety device.

• If playback from a USB HDD is unstable, provide

additional power by plugging the HDD into a

wall socket. If the problem continues, contact

the USB HDD manufacturer.

• You must remove the USB storage device safely

(by performing the “Safely Remove USB”

function) to prevent possible damage to the

USB memory.

Press the HOME button to move to the home

menu, press the YELLOW (C) button, and then

press the

E

button.

• SAMSUNG is not responsible for any data file

damage or data loss.

AVCHD

(Advanced Video Codec High Definition)

• This product can play back AVCHD format

discs. These discs are normally recorded and

used in camcorders.

• The AVCHD format is a high definition digital

video camera format.

• The MPEG-4 AVC/H.264 format compresses

images with greater efficiency than the

conventional image compressing format.

• Some AVCHD discs use the “x.v.Colour” format.

This product can play back AVCHD discs that

use “x.v.Colour” format.

• “x.v.Colour” is a trademark of Sony Corporation.

• “AVCHD” and the AVCHD logo are trademarks

of Matsushita Electronic Industrial Co., Ltd. and

Sony Corporation.

English 11

|

02 Getting Started

|

NOTE

|



Some AVCHD format discs may not play, depending on the recording conditions.



AVCHD format discs need to be finalised.



“x.v.Colour” offers a wider colour range than normal DVD camcorder discs.



Some DivX, MKV and MP4 format discs may not play, depending on their video resolution and frame rate.

Accessories

Check for the supplied accessories below.

FUNCTION

DISC MENU TITLE MENU

MUTE

S/W LEVEL

TOOLS

RETURN

EXIT

INFO

MO/ST

3D SOUND

SOUND

'ĺ'

vTuner

AUDIO

1

2

3

4

56

7

8

0

9

POPUP

RECEIVER

SLEEP

BD TV

TUNER

MEMORY

SUBTITLE

SMART SEARCH

ABCD

EFFECT

HUB

VOL

TUNING

/ CH

TV

SOURCE

RDS DISPLAY

PTY- PTY SEARCH PTY+

TA

FULL SCREEN REPEATHOME

Video Cable FM Antenna User Manual

(For Power cord)

iPod Dock Toroidal Ferrite Core Remote Control/Batteries (AAA size)



Figures and illustrations in this User Manual are provided for reference only and may differ from actual

product appearance.

|

12 English

Getting Started

Front Panel

5V 500mA

DISPLAY

POWER

DISC TRAY

USB HOST

STOP OPEN/CLOSE

VOLUME CONTROL

PLAY/PAUSE ENTER

FUNCTION

REMOTE CONTROL

SENSOR

|

NOTE

|



To upgrade the product's software through the USB Host jack, you must use a USB memory stick.



When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the

6

button on the product or

the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the

E

button.

Rear Panel

|

NOTE

|



Ensure a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not obstruct

the cooling fan or ventilation holes.

LANiPod

WIRELESS

IMPEDANCE : 3

SPEAKERS OUT

SURROUND

DIGITAL

AUDIO IN

OPTICAL

VIDEO

OUT

AUX

IN

FM ANT

HDMI IN

2

1

HDMI OUT

LANiPod

WIRELESS

IMPEDANCE : 3

SPEAKERS OUT

SURROUND

DIGITAL

AUDIO IN

OPTICAL

VIDEO

OUT

AUX

IN

FM ANT

HDMI IN

2

1

HDMI OUT

LAN TERMINAL

iPod

COOLING FAN

TX CARD CONNECTION

(WIRELESS)

EXTERNAL DIGITAL

AUDIO IN (OPTICAL)

HDMI IN

HDMI OUT

FM ANTENNA

SPEAKER OUTPUT

CONNECTORS

VIDEO OUTAUX IN

English 13

|

02 Getting Started

Remote Control

Tour of the Remote Control

FUNCTION

DISC MENU TITLE MENU

MUTE

S/W LEVEL

TOOLS

RETURN

EXIT

INFO

MO/ST

3D SOUND

SOUND

'ĺ'

vTuner

AUDIO

1

2

3

4

56

7

8

0

9

POPUP

RECEIVER

SLEEP

BD TV

TUNER

MEMORY

SUBTITLE

SMART SEARCH

ABCD

EFFECT

HUB

VOL

TUNING

/ CH

TV

SOURCE

RDS DISPLAY

PTY- PTY SEARCH PTY+

TA

FULL SCREEN REPEATHOME

Turn the product on and off.

To change to Home Cinema,

press the BD button.

Press numeric buttons to operate

options.

Press to skip backwards or forwards.

Adjust the volume.

Cut off the sound temporarily.

Press this to see the full screen

on a TV.

Press to move to the Home screen.

Select on-screen menu items and

change menu value.

Return to the previous menu.

These buttons are used both for

menus on the product and also

several Blu-ray Disc functions.

Press to view the disc menu.

Press to use the Tools menu.

Press to use Smart Hub.

Selects the disc Audio language.

To change to TV mode, press the

TV button.

Press to stop/play a disc.

Press to search contents.

Press this to use the vTuner.

Press to apply sound effects.

Set a Sleep time to shut off the

product.

Press to select Blu-ray's mode

(HDMI1, AUX, BD/DVD, etc.).

or

Press to select TV's video mode.

Select MONO or STEREO for radio

broadcasts.

Press to search backwards or

forwards.

Press to pause a disc.

Search for active FM stations and

to change channels.

Use to adjust the level of the

subwoofer.

Use to enter the Popup menu/

Title menu.

Press to exit the menu.

Use to display the playback

information when playing

a Blu-ray/DVD disc.

Use to set a preset radio frequency.

Allows you to repeat a title,

chapter, track or disc.

Press to enjoy an ordinary 2D video

in 3D mode.

Selects the disc subtitle language.

Press to apply 3D sound effect.

To open and close the disc tray.

Use the RDS function to receive

FM stations.

|

14 English

Getting Started

Installing batteries in the Remote

Control

Battery size: AAA

21

|

NOTE

|



Make sure to match the “+” and “–” ends of the batteries

with the diagram inside the compartment.



Assuming typical TV usage, the batteries last for about

one year.



The remote control can be used up to approximately

7 meters from the product in a straight line.

Setting the Remote Control

You can control certain functions of your TV with

this remote control.

When operating a TV with the remote control

1 . Press the TV button to set the remote control

to TV mode.

2 . Turn on your TV.

3 . While holding down the POWER button,

enter the code corresponding to your brand

of TV.

• If there is more than one code listed for

your TV in the table, enter one at a time to

determine which code works.

• Example : For a Samsung TV

While holding down the POWER button,

use the number buttons to enter 00. If that

does not work, try 15, then 16, etc.

4 . If the TV turns off, the setting is complete.

• You can use the TV POWER, VOLUME,

CHANNEL, and Numeric buttons (0~9).

|

NOTE

|



The remote control may not work on some brands of TV's.

Also, some operations may not be possible, depending on

your brand of TV.



The remote control will work with Samsung TVs by

default.

TV Control Codes

Brand Code

Admiral

(M.Wards)

56, 57, 58

A Mark 01, 15

Anam

01, 02, 03, 04, 05,

06, 07, 08, 09, 10, 11,

12, 13, 14

AOC 01, 18, 40, 48

Bell & Howell

(M.Wards)

57, 58, 81

Brocsonic 59, 60

Candle 18

Cetronic 03

Citizen 03, 18, 25

Cinema 97

Classic 03

Concerto 18

Contec 46

Coronado 15

Craig 03, 05, 61, 82, 83, 84

Croslex 62

Crown 03

Curtis Mates 59, 61, 63

CXC 03

Daewoo

02, 03, 04, 15, 16, 17,

18, 19, 20, 21, 22, 23,

24, 25, 26, 27, 28,

29, 30, 32, 34, 35, 36,

48, 59, 90

Daytron 40

Dynasty 03

Emerson

03, 15, 40, 46, 59, 61,

64, 82, 83, 84, 85

Fisher 19, 65

Funai 03

Futuretech 03

General

Electric (GE)

06, 40, 56, 59, 66,

67, 68

Hall Mark 40

Hitachi 15, 18, 50, 59, 69

Inkel 45

JC Penny 56, 59, 67, 86

JVC 70

KTV 59, 61, 87, 88

KEC 03, 15, 40

KMC 15

LG (Goldstar)

01, 15, 16, 17, 37,

38, 39, 40, 41, 42,

43, 44

Luxman 18

LXI (Sears)

19, 54, 56, 59, 60, 62,

63, 65, 71

Magnavox

15, 17, 18, 48, 54, 59,

60, 62, 72, 89

Marantz 40, 54

Matsui 54

MGA 18, 40

Brand Code

Mitsubishi/

MGA

18, 40, 59, 60, 75

MTC 18

NEC 18, 19, 20, 40, 59, 60

Nikei 03

Onking 03

Onwa 03

Panasonic

06, 07, 08, 09, 54, 66,

67, 73, 74

Penney 18

Philco

03, 15, 17, 18, 48, 54,

59, 62, 69, 90

Philips

15, 17, 18, 40, 48,

54, 62, 72

Pioneer 63, 66, 80, 91

Portland 15, 18, 59

Proton 40

Quasar 06, 66, 67

Radio Shack 17, 48, 56, 60, 61, 75

RCA/Proscan

18, 59, 67, 76, 77, 78,

92, 93, 94

Realistic 03, 19

Sampo 40

Samsung

00, 15, 16, 17, 40, 43,

46, 47, 48, 49,

59, 60, 98

Sanyo 19, 61, 65

Scott 03, 40, 60, 61

Sears 15, 18, 19

Sharp 15, 57, 64

Signature

2000

(M.Wards)

57, 58

Sony 50, 51, 52, 53, 55

Soundesign 03, 40

Spectricon 01

SSS 18

Sylvania

18, 40, 48, 54, 59,

60, 62

Symphonic 61, 95, 96

Tatung 06

Techwood 18

Teknika 03, 15, 18, 25

TMK 18, 40

Toshiba 19, 57, 63, 71

Vidtech 18

Videch 59, 60, 69

Wards

15, 17, 18, 40, 48,

54, 60, 64

Yamaha 18

York 40

Yupiteru 03

Zenith 58, 79

Zonda 01

Dongyang 03, 54

English 15

|

03 Connections

Connections

This section describes various methods of connecting the product to other external components.

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit

If you attach a Toroidal ferrite core to the power cord of

the main unit, it will help to prevent RF interference from

radio signals.

1. Pull the fixing tab of the Toroidal ferrite core to open

it.

2. Make a loop twice in the main unit power cord.

3.

Attach the Toroidal ferrite core to the main unit power

cord as the figure shows and press it until it clicks.

Connecting the Speakers

Front

Speakers

Place these speakers in front of your listening position, facing inwards (about 45°)

toward you. Place the front speakers so that their tweeters will be at the same height as

your ear. Align the front face of the front speakers with the front face of the centre

speaker or place them slightly in front of the centre speakers.

Centre Speaker

It is best to install the Centre Speaker at the same height as the front speakers. You can

also install it directly over or under the TV.

Surround

Speakers

Place these speakers to the side of your listening position.

If there isn't enough

room, place these speakers so they face each other. Position them about 60 to

90cm above your ear, facing slightly downward.

*

Unlike the front and centre speakers, the surround speakers are used mainly for

sound effects. Sound will not come from them all the time.

Subwoofer

The position of the subwoofer is not so critical. Place it anywhere you like.

Position of the product

Place it on a stand or cabinet shelf, or

under the TV stand.

Selecting the Listening Position

The listening position should be

located about 2.5 to 3 times the

distance of the TV's screen size

away from the TV. For example, if

you have a 46 inch screen, locate

the listening position 2.92 to 3.50

meters from the screen.

Front (L)

Surround (L)

Surround (R)

Front (R)

Product

Centre

Subwoofer

LANiPod

WIRELESS

IMPEDANCE : 3

SPEAKERS OUT

SURROUND

HDM

I

|

16 English

Connections

Speaker Components

Installing the Speakers on the Tallboy Stand

1. Turn the Stand Base upside-down and

connect it to the Stand.

2. Use the driver to combine the screws (5x20)

on the 3 marked holes.

3. Straighten a supplied speaker wire and put in

the hole on the centre of Stand Base.

4. Connect the upper Speaker to the assembled

Stand.

5. Insert a screw (5x15) clockwise into the hole

on the rear of the speaker using a screwdriver.

And then connect a speaker cable.

6. This is the appearance after the speaker is

installed.

Follow this steps to install other speaker.

1

Stand Base

Stand

3

4

Speaker

Stand

2

5 6

SPEAKER CABLE

STAND

STAND BASE

FRONT

(L) (R)

SURROUND

(L) (R)

CENTRE

SUBWOOFER

SCREW (5X15): 4EA

SCREW (5

X20): 12EA

English 17

|

03 Connections

Connecting The Speakers

1. Match each speaker cable bundle to the correct speaker by matching the

colour coded plug on each bundle to the coloured sticker on the bottom

of each speaker.

2. To attach speaker wire to each speaker:

a. Press down the red tab on the back of the speaker, insert the red wire,

and then release the tab.

b. Press down the black tab on the back of the speaker, insert the black

wire, and then release the tab.

3.

Connect the speaker wire plugs to the back of the product by matching the

colours of the speaker plugs to the colours of the speaker jacks.

Black

Red

LANiPod

WIRELESS

IMPEDANCE : 3

SPEAKERS OUT

SURROUND

HDM

IMPEDANCE : 3

SPEAKERS OUT

SURROUND

Front

Speaker (R)

Front

Speaker (L)

Subwoofer

Centre Speaker

Surround

Speaker (R)

Surround

Speaker (L)

|

18 English

Connections

Connecting the Optional Wireless Receiver Module

To connect the surround speakers wirelessly, you have to purchase the wireless receiver module and TX

card from your Samsung retailer.

• This product should be connected with the SWA-5000 only.

LANiPod

WIRELESS

IMPEDANCE : 3

SPEAKERS OUT

SURROUND

HDM

IMPEDANCE : 3

SPEAKERS OUT

SURROUND

Front

Speaker (R)

Front

Speaker (L)

Subwoofer

Centre Speaker

Surround

Speaker (L)

Surround

Speaker (R)

Wireless Receiver Module

1. Follow the 1 to 3 steps as shown on the previous page.

2. With the product turned off, insert the TX card into the TX Card

Connection (WIRELESS) on the back of the product.

• Hold the TX card so that the label "WIRELESS" faces upward

and insert the card into the port.

• The TX card enables communication between the product and

the wireless receiver module.

3. Connect the left and right surround speakers to the wireless

receiver module. Again, match the colour of the plugs to the jacks

on the wireless receiver module.

4. Plug the power cord of the wireless receiver module into the

wall outlet.

5. Turn on the product. The product and wireless receiver module will now communicate with each

other and you will hear sound from the Surround speakers.

LAN

WIRELESS

HDMI OUT

TX card

English 19

|

03 Connections

|

CAUTION

|



If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install.

However, when you install it, accessories (nails or screws) and installation is not provided by the company.



Do not let children play with or near the speakers. They could get hurt if a speaker falls.



When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.



Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole)

of the subwoofer speaker.



Do not hang the subwoofer on the wall through the duct (hole).



Do not insert any other card except the TX card dedicated to the product.

If you insert a different TX card, you can damage the product and may not be able to remove the card easily.



Do not insert the TX card upside down or in the reverse direction.



Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem.



The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture.



For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions.



If you hear no sound from the wireless surround speakers, switch the mode to Dolby Pro Logic II.



In 2-CH mode, you will hear no sound from the wireless surround speakers.

|

NOTE

|



If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.



Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound

from the speakers may be disrupted because of interference.



If you use a device such as a microwave oven, wireless LAN Card, or any other device that uses the 2.4/5.8GHz frequencies near the

product, sound from the speakers may be disrupted because of interference.



The maximum transmission distance from the product to the wireless receiver module is about 33 feet (10m), but may vary depending on

your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system

may not operate at all, because the radio wave cannot penetrate metal.



If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless receiver module. With the

product turned off, press "0"



"1"



"3"



"5" on the remote control. Turn on the wireless receiver module. Then, press and hold the “ID

SET” button on the back of the wireless receiver module for 5 seconds, and then turn the product on.

|

20 English

Connections

Connecting the FM Antenna

LANiPod

WIRELESS

IMPEDANCE : 3

SPEAKERS OUT

SURROUND

OPTICAL

VIDEO

OUT

AUX

IN

DIGITAL

AUDIO IN

HDMI IN

1

2

HDMI OUT

LAN

iPod

WIRELESS

IMPEDANCE : 3

SPEAKERS OUT

SURROUND

OPTICAL

VIDEO

OUT

OU

AUX

IN

DIGITAL

AUDIO IN

N

HDMI IN

1

2

HDMI OUT

FM ANT

FM Antenna (supplied)

1 . Connect the FM antenna supplied to the FM ANTENNA Jack.

2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it

to a wall or other rigid surface.

|

NOTE

|



This product does not receive AM broadcasts.

Connecting to an iPod/iPhone

Using a USB Cable

Connect an iPod/iPhone using the USB cable to

the front USB port.

5V 500mA

Using a Dock

To view a video from your iPod on your TV, you

must also connect the Video Out jack on the

product to the Video In jack on your TV.

See page 21.

LANiPod

WIRELESS

IMPEDANCE : 3

SPEAKERS OUT

SURROUND

OPTICAL

VIDEO

OUT

AUX

IN

DIGITAL

AUDIO IN

FM ANT

HDMI IN

1

2

HDMI OUT

L

A

N

WIRELE

SS

I

MPEDANCE :

3

SPEAKERS OU

T

SURROUN

D

SURROUN

D

OPTICAL

V

IDEO

OUT

OU

AU

X

I

N

D

IGITAL

AUDIO IN

N

FM AN

T

HDMI

IN

1

2

H

DMI OU

T

iPod

|

NOTE

|



Make sure to connect the dock connector so that the label “



” faces upward.

Sayfa yükleniyor...

Samsung HT-E5550 Kullanım kılavuzu

Samsung HT-E5550 Kullanım kılavuzu

diğer dillerde

İlgili makaleler

Diğer belgeler