IMPORTANT SAFETY INSTRUCTIONS
■
Read the instructions for use carefully before using your appliance for the first
time and retain them for future use: any use which does not conform to the
instructions will absolve from any liability.
■
Never leave the appliance within reach of children unless they are supervised.
The use of this appliance byyoung children or by disabled persons must be
supervised at all times.
■
Make sure the power rating of your appliance does in fact match that of your
electrical system.
■
Your appliance is intended only for domestic use, indoors.
■
Unplug your appliance as soon as you have finished using it and when you are
cleaning it.
■
Unplug before inserting or removing parts.
■
Do not use the appliance if it is not working correctly if it has been damaged.If
this happens, please contact an approved service centre.
■
Do not open until blade stop.
■
Any intervention apart from no service centre.
■
Never put the appliance, the power cord or the plug into water or any other liquid.
■
Never allow the power cord to hang down within reach of children.
■
The power cord must never be close to or in contact with the hot parts of your
appliance, close to a source of heat or rest on a sharp edge.
■
If the power cord or the plug are damaged, do not use the appliance.To avoid any
risk, these must be replaced by an approved service centre.
■
For your own safety, use only the its accessories and spare parts which are
suited to your appliance.
■
All appliances are subjected to strict quality control. Practical user tests are
performed with appliances selected at random, which explains any signs of use.
■
Handle the blade with great care: It is extremely sharp.
■
Never use the blade, out of the bowl.
USING YOUR APPLIANCE FOR THE FIRST TIME
1.ASSEMBLY AND DISASSEMBLY OF THE APPLIANCE
With the appliance unplugged.
■
Position the blade or the whisking attachment on the spindle of the bowl holding it
by the plastic part.
■
Place the security lid on top of the bowl.
■
Put the motor unit on top of the security lid.
■
To disassemble first unplug the motor unit then do the same in reverse.