• This appliance is also can be used as a kettle. In this case, the top part of
the appliance can be covered by a teapot cover. Because being in energy
safe mode, the kettle keeps the warm safe and helps you to find warm water
in every period.
Preparing tea: Plug the appliance in to the wall socket. When not using the
appliance, please make sure that you swiched OFF the main switch.
Pour the water between min and max levels depending to the tea quantity that
you want to steer. Place the kettle on the power base. Open the teapot lid,
replace the tea filter. Put some tea in to the filter and pour some water on the tea
and then place the filter into the teapot. Slide the main switch yo (I) and boiling /
keep warm switch to ON position. The red pilot light on the handle turns ON and
the water starts to heat. Depending to the water quntity, water starts to heat.
Depending to the water quantity, water start boiling 3-10 minutes time and
boiling / keep warm switch goes on OFF position and starts to keep the water
and tea warm After that, the red light turns OFF and the green light turns ON.
You could steer the tea with boiled water and then place the teapot top of the
kettle. If neccessary, you could add some water in to the kettle. If neccessary,
you could add some water in to the kettle. If you add some more water, you need
to switch ON the boiling / keep warm switch.
Heating water: This appliance is also used as kettle. Pour some water in to the
kettle and place it on to the power base and then is covered by the kettle / teapot
lid. Push the main switch and boiling / keep warm switch. After the appliance
boils the water quickly, is starts to keep warm the water. If you add some more
water, you need to slice the boiling / keep warm switch to ( ON ) position.
CLEANING AND MAINTENANCE OF THE APPLIANCE
• After you steer the tea or boil the water, you should switch the main switch
OFF.
• You could clean the teapot and filter by hand or in the dishwasher. Empty the
water inside of the kettle and then clean with dry or damp cloth. Never try to
clean the kettle under running water.
• In a period of time, there might be some scaleaccurs on the heating element
and this reduces the the performmance of your appliance. In this case, after
boiling some water; you need to switch the main boiling / keep warm switch
OFF. After that boil the water with some vinegar in max capacity water level,
then pour the water. If the scale is not cleaned well, you need to do this
continuously. But you need to make sure that you clean inside of the kettle
well in every descale step.