Sony KP-41S5 El kitabı

NL

Installatie

Bediening

Opérations

Préparation

FR

Operating Instructions

Getting Started

GB

3-862-113-12 (1)

R

GB

KP-41S4

KP-41S5

Projection TV

TR

Kullanwm Bilgileri

Baxlarken

Istruzioni per l’uso

Operazioni preliminari

IT

DE

Vorbereitungen

Bedienung

2

WARNING

To prevent fire or shock hazard, do not expose the unit to

rain or moisture.

Dangerously high voltages are present inside the set. Do

not open the cabinet. Refer servicing to qualified

personnel only.

Safety Information

All TVs operate on extremely high voltages. To prevent

fire or electric shock, please follow the safety procedures

below. For your protection, refer all servicing to qualified

personnel only.

For general safety:

• Do not expose the TV to rain or moisture.

• Do not open the rear cover.

For safe operations:

• Do not operate the TV on any other voltages, but 220–

240 V AC.

• Do not operate the TV if any liquid or solid object falls in it

- have it checked immediately.

• Do not keep the set plugged in if you are not going to use

it for several days.

• Do not pull on the power cord to disconnect the TV. Pull it

out by the plug.

• Do not place anything on the surface of the front panel

cover when you open it.

Cleaning the Screen

• To remove dust from the front of the screen, unplug the TV

and wipe gently with a soft cloth lightly dampened with

water or a mild detergent solution, using vertical strokes

only. Then wipe it with a dry, soft cloth. Never use solvents

or thinners for cleaning purposes.

• To clean the screen with a cloth, please use a soft cloth

lightly moistened with a mild detergent solution or water.

Do not use any type of abrasive pad, alkaline cleaner,

scouring powder or solvent, such as alcohol or benzine, or

antistatic spray.

As a safety precaution, unplug the TV before cleaning it.

• Do not rub, touch, or tap the surface of the screen with

sharp or abrasive items, like a ball point pen or a screw

driver. Otherwise, this type of contact may result in a

scratched screen.

Important Information

Please read the following information on using and

maintaining the TV, for optimum viewing quality.

Picture Quality

• Poor colour registration (the red, green and blue signals

do not overlap properly) may be caused by the influence

of the earth’s magnetism. Correct this with the

convergence adjustment.

• Avoid touching the screen, and take care not to scratch

the surface with hard objects.

• Displaying a still picture for long periods of time, for

instance, when operating a video game or personal

computer and viewing a programme in 16:9 mode, may

damage the picture tube. To avoid this, keep the picture

contrast level low.

Illumination

To obtain a clear picture, do not expose the screen to

direct illumination or direct sunlight. If possible, use spot

lighting directed down from the ceiling.

Installation

• To prevent over heating of the set, do not block the

ventilation openings.

• Do not install the TV in a hot or humid place, or in a place

subject to direct sunlight, excessive dust or mechanical

vibration.

• After transporting the TV directly from a cold to a warm

location, or if the room temperature has changed

suddenly, pictures may be blurred or show poor colour

over portions of the picture. This is because moisture has

condensed on the mirrors or lenses inside the TV. Let the

moisture evaporate before using the TV.

Maintenance

• Save the original shipping carton and packing material to

use if you ever have to ship your TV. For maximum

protection, repack your TV as it was originally packed at

the factory.

• To keep the cabinet looking brand-new, periodically clean

it with a soft cloth. Stubborn stains may be removed with a

cloth slightly dampened with a mild detergent solution.

Never use strong solvents such as thinner or benzene, or

abrasive cleaners since these will damage the cabinet. As

a safety precaution, unplug the TV before cleaning it.

• If the picture turns dark after the TV has been in use for a

long period of time, it may be necessary to clean the

inside of the TV. Consult qualified service personnel for

this.

GB

3

GB

Contents

Overview ................................................................................... 4

Getting Started ...............................................................

6

Step 1 Preparation..................................................................... 6

Check the Supplied Accessories ..................................... 6

Insert the Batteries into the Remote Commander............. 6

Connect the Aerial .......................................................... 6

Step 2 Tuning in to TV Stations .................................................. 7

Choose a Language ....................................................... 7

Preset Channels Automatically ....................................... 8

Step 3 Adjusting Colour Registration (CONVERGENCE) ........... 9

Converge the Red, Green, and Blue Lines....................... 9

Additional Presetting Functions ................................................ 10

Presetting Channels Manually....................................... 10

Manual Fine-Tuning ...................................................... 11

Sorting Programme Positions........................................ 11

Skipping Programme Positions ..................................... 12

Captioning a Station Name ........................................... 12

Using Parental Lock ...................................................... 13

Tuning in a Channel Temporarily................................... 13

Operating Instructions.................................................

14

Watching the TV....................................................................... 14

Switching the TV on and off ........................................... 14

Selecting TV Programmes ............................................ 14

Adjusting the Volume .................................................... 14

Operating the TV Using the Buttons on the TV............... 14

Watching Teletext or Video Input................................... 15

More Convenient Functions .......................................... 15

Adjusting and Setting the TV Using the Menu ........................... 16

Adjusting the Picture and Sound ................................... 16

Using the Sleep Timer................................................... 17

Teletext.................................................................................... 18

Direct Access Functions................................................ 18

Connecting and Operating Optional Equipment ........................ 20

Connecting Optional Equipment.................................... 20

Selecting lnput Signal.................................................... 21

Using AV Label Preset .................................................. 22

Checking and Selecting the Input and

Output Sources Using the Menu ................................. 22

Remote Control of Other Sony Equipment ..................... 23

For Your Information ................................................................ 24

Optimum Viewing Area ................................................. 24

Troubleshooting............................................................ 25

Specifications ............................................................... 25

Getting Started

Operating Instructions

4

Name

Main power switch

Standby indicator

Programme buttons

Volume buttons

Input select buttons

Headphones jack

Input jacks (S video/video/audio)

Auto Preset button

Auto Convergence button

Symbol

U

u

PROGR+/–

¸ +/–

l

S

3, 3, 3

Overview

This section briefly describes the buttons and controls on the TV

set and on the Remote Commander. For more information, refer to

the pages given next to each description.

TV set-front

Refer to page

14

15

20

21

8

9

R

3 3

3

MONO

L/G/S/I R/D/D/D

PROGR

R

5

GB

Name

Mute on/off button

TV Standby button

TV power on/TV mode selector

button

Teletext button

Input mode selector/

Teletext: Freezing the subpage

Teletext: Reveal button

Number buttons

Double-digit entering button

Direct channel entering button

Volume control button

Programme selectors

Teletext: Page up/page down buttons

Picture mode button

Sound mode button

On-screen display button

Time display button

Button to change Screen Format

Teletext: Favourite pages button

Symbol

o

TV u

;

f

…/

Ú/

1,2,3,4,5,6,

7,8,9 and 0

÷

C

Á+/–

PROGR +/–

R/S×

Í

≥

#

For the Menu System

Use the MENU button and the joystick as follows.

1 Press MENU button to switch menu on or off.

2 Use the joystick as follows:

The operable functions of the joystick are displayed on the

screen.

MENU

Name

Menu on/off button

Joystick for Menu selection

Press to confirm selection

(OK function)

Name

Video equipment selector

Video equipment operation

buttons

Symbol

MENU

Remote commander

No function on this set

Symbol : , , , , , , Ú/ (for TV

operation)

Menu operation

Symbol

VTR1/2/3,

MDP

;; - :: L

J a VIDEO f

CH +/–

Refer to page

23

Video operation

Menu operation

TV/Teletext operation

Refer to page

15

14

15

18

14

13

14

18

17

15

19

Refer to page

See below.

GREEN: scroll up

RED:

decrease/back to last item

or to last menu

When menu is not

displayed:

Push to red to display the

last menu screen

YELLOW:

increase/forward

to next item

Joystick: Press at

its neutral position

to confirm selection

or store

BLUE: scroll down

TV/Teletext operation

RM-862

A

b



a/Å

´/´

;

8



0

+

_

CH

?

MDP2

TV

VIDEO

3VTR 1

( u)

p Pr

PROGR

≥

¸

MENU

c

´

8

x

˚

+

;

REC

…/

Ú/;

¤

6

1 Check the Supplied Accessories

When you’ve taken everything

out of the carton, check that you

have these items:

• RM-862 Remote Commander

• Two IEC designation R6 batteries

2 Insert the Batteries into the Remote Commander

Step 1 Preparation

Getting Started

Fit an IEC aerial connector attached to 75-ohm coaxial cable (not

supplied) to the ) socket at the rear of the TV.

Remove the cover.

Check the correct

polarities.

Note: Always remember

to dispose of used

batteries in an

environmentally friendly

way.

3 Connect the Aerial

1

2

3

1

2

3

C

2/

1

R/D/D/D-L/G/S/I

2

3/

3

7

GB

1 Choose a Language

This function enables you to select the language of the menu

screens.

1 Press U (main power switch) on the TV.

The TV will switch on. If the standby indicator on the TV is lit, press

; or a number button on the Remote Commander.

2 Press MENU on the remote commander.

The LANGUAGE menu appears

3 Push the joystick to blue or green to select the language you want.

Press the joystick to confirm your selection.

4 Press MENU to restore the normal TV picture.

U

1

2

3

RM-862

A

b

a/Å

´/´

;

8



0

+

_

CH

?

MDP2

TV

VIDEO

3VTR 1

( u)

p Pr

PROGR

≥

¸

MENU

c

´

8

x

˚

+

;

REC

…/

Ú/;

¤

Step 2 Tuning in to TV Stations

LANGUAGE

8

2 Preset Channels Automatically

With this function, the TV automatically searches and stores up to

100 channels onto programme positions. If you prefer “Presetting

Channels Manually”, please refer to page 10 in Additional

Presetting Functions.

1 Press U (main power switch) on the TV.

The TV will switch on. If the standby indicator on the TV is lit, press

; or a number button on the Remote Commander.

2 Press and hold the

on the TV until the automatic menu is

displayed and the search starts.

After all available channels are stored, the normal TV picture is

shown.

Presetting channels automatically by using the

Remote Commander

1 Press MENU.

2 Push the joystick to blue or green to select the symbol

, then

push to yellow.

The PRESET menu appears.

3 Push the joystick to blue or green to select “Auto Programme”.

4 Push to yellow and hold until the AUTO PROGRAMME menu is

displayed and the search starts.

After all available channels have been preset, the normal TV

picture is shown.

Notes:

• You can sort the

programme positions

to have them appear

on screen in the order

you like. For details,

see “Sorting

Programme Positions”

on page 11.

• To stop automatic

channel presetting

Press Menu on the

Remote Commander.

RM-862

A

b

a/Å

´/´

;

8



0

+

_

CH

?

MDP2

TV

VIDEO

3VTR 1

( u)

p Pr

PROGR

≥

¸

MENU

c

´

8

x

˚

+

;

REC

…/

Ú/;

¤

Auto Programme

Manual Programme

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

6 B/G

SYSPROG

C26

CHAN

- - - - -

LABEL

AUTO PROGRAMME

3 3

3

MONO

L/G/S/I R/D/D/D

PROGR

R

9

GB

Converge the Red, Green, and

Blue Lines

1 Press button on the TV.

2 The Auto Convergence function works for about 30 seconds.

When the auto convergence function does not

work correctly

Adjust the colour registration by selecting the “Convergence” of the

PRESET menu.

1 Press MENU.

2 Push the joystick to blue or green to select the symbol

, then

push to yellow.

The PRESET menu appears.

3 Push the joystick to blue or green to select “Convergence”, then

push to yellow.

The CONVERGENCE menu appears.

4 Push the joystick to blue or green to select “the line” (vertical and

horizontal lines in red and blue) you want to adjust.

Press the joystick to confirm.

: red vertical line (left/right adjustment)

: red horizonta line (up/down adjustment)

: blue vertical line (left/right adjustment)

: blue horizontal line (up/down adjustment)

The line to adjust is selected.

5 Push the joystick to blue or green to converge the selected line

with the green line in the centre.

Press the joystick to confirm.

6 Repeat steps 4 and 5 to adjust the other lines, until all the lines

have overlapped to form a white cross.

7 Press MENU to restore the normal TV picture.

..

.

Step 3 Adjusting Colour Registration

(CONVERGENCE)

1

2

3

RM-862

A

b

a/Å

´/´

;

8



0

+

_

CH

?

MDP2

TV

VIDEO

3VTR 1

( u)

p Pr

PROGR

≥

¸

MENU

c

´

8

x

˚

+

;

REC

…/

Ú/;

¤

Auto Programme

Manual Programme

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

Note

The Auto Convergence

function does not work:

• when no signal is input.

• when the input signal is

weak.

• when the screen is

exposed to spotlights

or direct sunlight.

• when you watch the

teletext broadcast.

• when you watch TV

programmes in 16:9

mode.

3 3

3

MONO

L/G/S/I R/D/D/D

PROGR

R

10

0

1

2

3

4

5

6

7

8

9

B/G

SYSPROG

C29

C31

C32

C36

C37

C40

C41

C44

C49

C52

CHAN

- - - - -

LABEL

ON

AFT

MANUAL PROGRAMME PRESET

MANUAL

PROGRAMME

PRESET

Additional Presetting Functions

Presetting Channels Manually

Using this function, you can preset channels one by one to

different programme positions. This is also convenient to allocate

programme numbers to video input sources.

1 Press MENU.

2 Push the joystick to blue or green to select the symbol on the

menu screen. Push to yellow to confirm the selection.

3 Push to blue or green to select “Manual Programme”. Push to

yellow to confirm the selection.

4 Push to blue or green to select the programme position (PROG) to

which you want to preset a channel. Push to yellow to confirm.

5 Push to blue or green to select the TV broadcast system (SYS)

(B/G for western European countries, D/K for eastern European

countries) or a video input source (AV1, AV2, AV3, YC2, YC3,

RGB). Push to yellow to confirm.

6 Push to blue or green to select “C” (for terrestrial channels) or “S”

(for cable channels). Push to yellow to confirm.

There are two options to preset channels manually:

a) You know the channel number.

Please use method “Direct Input”.

or

b) You don’t know the channel number.

Please use method “Search”.

7 a) Direct Input

Select the first number digit of “CHAN” (channel), then the second

number digit of “CHAN” with the number buttons on the Remote

Commander (e.g. for channel 2, first press 0, then 2).

7 b) Search

Push the joystick to blue or green to search for the next available

channel.

8 If you want to store the channel, go to step 9. If not, select a new

channel using the number button on the Remote Commander or

push the joystick to blue or green to resume the search.

9 Press the joystick to confirm.

10 Repeat steps 4 to 9 to preset other channels.

11 Press MENU to restore the normal TV picture.

1

2

3

RM-862

A

b

a/Å

´/´

;

8



0

+

_

CH

?

MDP2

TV

VIDEO

3VTR 1

( u)

p Pr

PROGR

≥

¸

MENU

c

´

8

x

˚

+

;

REC

…/

Ú/;

¤

Auto Programme

Manual Programme

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

11

GB

0

1

2

3

4

5

6

7

8

9

B/G

SYSPROG

C28

C29

C35

C38

C40

C42

C55

C56

C57

C58

CHAN

BBC-W

VHS-2

CNN- -

- - - - -

MV-CH

VHS-1

- - - - -

8MM

- - - - -

LABEL

PROGRAMME SORTING

0

1

2

3

4

5

6

7

8

9

B/G

SYSPROG

C29

C31

C32

C36

C37

C40

C41

C44

C49

C52

CHAN

- - - - -

LABEL

ON

AFT

MANUAL PROGRAMME PRESET

Manual Fine-Tuning

Normally, the automatic fine-tuning (AFT) function is already

operating.

If the picture is distorted, however, you can manually fine-tune the

TV to obtain a better picture reception.

1 Press MENU.

2 Push the joystick to blue or green to select the symbol

on the

menu screen. Push to yellow to confirm.

3 Push to blue or green to select “Manual Programme”. Push to

yellow to confirm.

4 Push to blue or green to select the programme number which

corresponds to the channel you want to manually fine-tune.

5 Push to yellow repeatedly until the AFT position changes colour.

6 Push to blue or green to fine-tune the channel frequency (–15 to

+15).

7 Press the joystick to confirm.

8 Repeat steps 4 to 7 to fine-tune other channels.

9 Press MENU to restore the normal TV picture.

Sorting Programme Positions

This function enables you to sort the programme positions to a

preferable order.

1 Press MENU.

2 Push the joystick to blue or green to select the symbol

on the

menu screen. Push to yellow to confirm.

3 Push to blue or green to select “Programme Sorting”. Push to

yellow to confirm.

4 Push to blue or green to select the programme position of the

channel you want to change. Press joystick to confirm.

5 Push to blue or green to select the programme position of the

channel you want to exchange. Press joystick to confirm.

6 Repeat steps 4 and 5 to sort other programme positions.

7 Press MENU to restore the normal TV picture.

PROGRAMME

SORTING

Auto Programme

Manual Programme

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

MANUAL

PROGRAMME

PRESET

12

- - - - -

A - - -

- - - - -

0

1

2

3

4

5

6

7

8

9

B/G

SYSPROG

C29

C31

C32

C36

C37

C40

C41

C44

C49

C52

CHAN LABEL

ON

AFT

MANUAL PROGRAMME PRESET

- - - - -

0

1

2

3

4

5

6

7

8

9

B/G

- - -

B/G

SYSPROG

C29

C31

C32

C36

C37

C40

C41

C44

C49

C52

CHAN LABEL

ON

AFT

MANUAL PROGRAMME PRESET

Skipping Programme Positions

This function enables you to skip unused programme positions

when selecting them with the PROGR +/– buttons. However, by

using the number buttons you can still select the skipped

programme position.

1 Press MENU.

2 Push the joystick to blue or green to select the symbol

on the

menu screen. Push to yellow to confirm.

3 Push to blue or green to select “Manual Programme”. Push to

yellow to confirm.

4 Push to blue or green to select the programme position you want to

skip. Push to yellow to confirm.

5 Push to blue or green to select “- - -” in the position SYS (system).

Press the joystick to confirm.

6 Repeat steps 4 and 5 to skip other programme positions.

7 Press MENU to restore the normal TV picture.

Captioning a Station Name

Channels are automatically labelled during presetting. You can,

however, individually name a channel or a video source using up

to five characters.

1 Press MENU.

2 Push the joystick to blue or green to select the symbol

on the

menu screen. Push to yellow to confirm.

3 Push to blue or green to select “Manual Programme”. Push to

yellow to confirm.

4 Push to blue or green to select the programme position with the

channel you want to label. Push to yellow repeatedly until the first

element of the position LABEL is highlighted.

5 Push to blue or green to select a letter or a number (select “-” for a

blank). Push to yellow to confirm. Select the other four characters

in the same way.

6 After selecting all characters, press the joystick to confirm.

7 Repeat steps 4 to 6 to label other channels or video sources.

8 Press MENU to restore the normal TV picture.

MANUAL

PROGRAMME

PRESET

MANUAL

PROGRAMME

PRESET

13

GB

3

2

C38 - - - - -

1

C35 CNN

PROG CHAN LABEL

0

C29 VHS-2

C28 BBC-W

B/G

SYS

B/G

PARENTAL LOCK

If you try to select a

programme that has

been blocked

The symbol appears

on the blank TV screen.

Using Parental Lock

This function enables you to prevent children from watching

undesirable broadcasts.

1 Press MENU.

2 Push the joystick to blue or green to select the symbol

on the

menu screen. Push to yellow to confirm.

3 Push to green or blue to select “Parental Lock”. Push to yellow to

confirm.

4 Push to green or blue to select the channel you want to block.

Press the joystick to confirm.

The symbol appears before the programme position to indicate

that this channel is now blocked.

5 Repeat step 4 to block other channels.

6 Press MENU to restore the normal TV picture.

Tuning in a Channel Temporarily

You can tune in to a channel temporarily, even though it has not

been preset.

1 Press C on the Remote Commander. For cable channels, press C

twice.

The indication “C” ( “S” for cable channels) appears on the screen.

2 Enter the double-digit channel number using the number buttons

(e.g. for channel 4, first press 0, then 4).

The channel appears. Note that the channel will not be stored.

To unblock

Select the channel to

unblock in the

“PARENTAL LOCK”

menu. Press the

joystick. The symbol

disappears.

Auto Programme

Manual Programme

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

0

1

2

3

4

5

6

7

8

9

B/G

SYSPROG

C28

C29

C35

C38

C40

C42

C55

C56

C57

C58

CHAN

BBC-W

VHS-2

CNN- -

- - - - -

MV-CH

VHS-1

- - - - -

8MM

- - - - -

LABEL

PARENTAL LOCK

C - -

RM-862

A

b

a/Å

´/´

;

8



0

+

_

CH

?

MDP2

TV

VIDEO

3VTR 1

( u)

p Pr

PROGR

≥

¸

MENU

c

´

8

x

˚

+

;

REC

…/

Ú/;

¤

Note

After you tune in a

channel temporarily, you

cannot enter the manual

preset mode.

To store the channel,

change to another

programme and refer to

the “Presetting Channels

Manually” on page 10.

14

Operating Instructions

Watching the TV

If no picture appears

when you press U on

the TV and if the

standby indicator on

the TV is lit, the TV is in

standby mode.

Press O, PROGR+/– or

one of the number

buttons to switch it on.

This section explains the basic functions you use while watching

the TV. Most operations are done using the Remote Commander.

Switching the TV on and off

Switching on

Press U on the TV.

Switching off temporarily

Press u on the Remote Commander.

The TV enters standby mode and the standby indicator on the front

of the TV lights up in red.

To switch on again

Press O, PROGR +/–, or one of the number buttons on the

Remote Commander.

Switching off completely

Press U on the TV.

To save energy, we recommend you switch off your TV completely

when the TV is not in use.

Selecting TV Programmes

Press PROGR +/– or press the number buttons.

To select a double-digit number

Press ÷, then the numbers.

For example, if you want to choose 23, press ÷, 2 and 3.

Adjusting the Volume

Press ¸ +/–.

Operating the TV Using the

Buttons on the TV

To select the programme number, press the PROGR +/– buttons.

To adjust the volume, press the ¸ +/– buttons.

To select the video input picture, press the button.

RM-862

A

b

a/Å

´/´

;

8



0

+

_

CH

?

MDP2

TV

VIDEO

3VTR 1

( u)

p Pr

PROGR

≥

¸

MENU

c

´

8

x

˚

+

;

REC

…/

Ú/;

¤



PROGR

R

15

GB

Watching Teletext or Video Input

Watching teletext

1 Press _ to view the teletext.

2 For teletext operation, enter a 3-digit page number with the number

buttons to select a page.

For fastext operation, push the joystick to the colour mark which

corresponds to the colour-coded menu.

For both operations, press R (PAGE + ) for the next page or

S (PAGE – ) for the preceding page.

3 To go back to the normal TV picture, press O .

Watching a video input picture

1 Press repeatedly until the desired video input appears.

2 To go back to the normal TV picture, press O.

More Convenient Functions

Displaying the on screen indications

Press to display the indications.

Press again to make the indications disappear.

Muting the sound

Press o.

To resume normal sound, press o again.

Displaying the time

Press #. This function is available only when teletext is broadcast.

To make the time display disappear, press # again.

Displaying the Programme Table

Press the joystick. Push the joystick to blue or green to select a

programme, then press the joystick to confirm. A Programme

Table will be displayed on the left side of the TV screen.

To make the Programme Table disappear, press MENU.

Viewing the programmes in 16:9 mode

Press .

Press again to return to 4:3 mode.

For details of the teletext

operation, refer to

page 18.

For details of the video

input picture, refer to

page 21.

RM-862

A

b



a/Å

´/´

;

8



0

+

_

CH

?

MDP2

TV

VIDEO

3VTR 1

( u)

p Pr

PROGR

≥

¸

MENU

c

´

8

x

˚

+

;

REC

…/

Ú/;

¤



PROGR

R

1

2

3

4

5

6

7

8

9

10

BBC

SAT

TV5

C02

C15

RTL

SKY

S34

AV1

MTV

16

Effect

User ˜ Game ˜ Movie ˜ Sports ˜ Live

When “User” is selected in “Picture Mode”

You can preset Brightness, Colour, Sharpness and Hue (NTSC

signals only) as follows:

1 Push the joystick to blue or green to select the desired item. Push

to yellow to confirm.

2 Push to red or yellow to adjust. Press the joystick to confirm.

3 Push to red to return to the PICTURE CONTROL menu.

Less

More

Resets picture to the factory preset levels.

4:3: normal

16:9: wide screen effect

PICTURE

CONTROL

SOUND

CONTROL

Adjusting and Setting the TV Using

the Menu

Adjusting the Picture and Sound

Although the picture and sound are adjusted at the factory, you can

adjust them to suit your own taste. You can also select dual sound

(bilingual) programmes when available or adjust the sound for

listening with the headphones.

1 Press MENU and select the symbol

for Picture Control or ≥ for

Sound Control. Push to yellow to confirm.

The PICTURE CONTROL or SOUND CONTROL menu appears.

2 Push the joystick to blue or green to select the desired item. Push

to yellow to confirm.

The selected item changes its colour.

3 Push to red or yellow to adjust the selected item. Press the joystick

to confirm.

For the effect of each control, see the table below.

4 Repeat steps 2 and 3 to adjust other items.

5 Press MENU to restore the normal TV picture.

Note

HUE is available for

NTSC colour systems

only.

Note on LINE OUT

The dual sound mode

output from the > jack

on the rear corresponds

to the Headphones Dual

Sound settings.

When watching a video

input source with

stereo sound

You can select Dual

Sound to change the

sound.

Effect of each control

PICTURE CONTROL

Picture Mode

Contrast

Reset

Format

RM-862

A

b

a/Å

´/´

;

8



0

+

_

CH

?

MDP2

TV

VIDEO

3VTR 1

( u)

p Pr

PROGR

≥

¸

MENU

c

´

8

x

˚

+

;

REC

…/

Ú/;

¤

Picture Mode

Contrast

Reset

Format

- - >

4:3

PICTURE CONTROL

Picture Mode

Brightness

Colour

Sharpness

Hue

User

PICTURE MODE

Sound Mode

Balance

Reset

Spatial

Dual Sound

Volume Offset

2 Volume

2 Dual Sound

- - > User

Off

Stereo

0

Stereo

SOUND CONTROL

Speaker

Centre in

Mode

Treble

Bass

User

SOUND MODE

17

GB

Effect

Choice between different sound effects

User ˜ Rock ˜ Jazz ˜ Pop

When “User” is selected in “Sound Mode”

You can preset Treble and Bass as follows:

1 Push the joystick to blue or green to select the desired item. Push

to yellow to confirm.

2 Push to red or yellow to adjust. Press the joystick to confirm.

3 Push to red to return to the PICTURE CONTROL menu.

More left

More right

Resets sound to the factory preset levels.

Off: normal

On: acoustic sound effect

A: channel 1 B: channel 2 Stereo n Mono

Presets the volume level for individual programmes.

–12

12

Less

More

A: channel 1 n B: channel 2

Stereo n Mono

Main: sound from TV set

Centre in: sound from external amplifier

Using the Sleep Timer

You can select a time period after which the TV automatically

switches into standby mode.

1 Press MENU.

2 Push the joystick to blue or green to select the symbol t on the

menu screen. Push to yellow to confirm.

3 Push to yellow. Push to red or yellow to set time delay.

OFF˜0:30˜1:00˜1:30..........3:30˜4:00

4 Press the joystick to confirm.

One minute before the TV switches into standby mode, a message

is displayed on the screen.

↑

TIMER

To switch off the timer

Select “OFF” in step 3.

To check the

remaining time

Press .

To go back to the

normal TV picture

Press MENU.

↑

SOUND CONTROL

Sound Mode

Balance

Reset

Spatial

Dual Sound

Volume Offset

2 Volume

2 Dual Sound

Speaker

↑

Sleep Timer OFF

TIMER

Changing Modes Quickly

You can quickly change the Sound Mode or the Picture Mode

without entering the “SOUND CONTROL“ or the “PICTURE

CONTROL“ menu.

1 Press Í for the picture or ≥ for the sound.

2 Push joystick to blue or green to select the desired mode.

3 Press Í or ≥ again to restore the normal TV screen.

18

Note

Teletext errors may

occur if the broadcasting

signals are weak.

Teletext

TV stations broadcast an information service called Teletext via

the TV channels.Teletext service allows you to receive various

information pages such as weather reports or news at any time

you want.

Direct Access Functions

Switching Teletext on and off

1 Select the TV channel which carries the teletext broadcast you

want to watch.

2 Press _ to switch on teletext.

A teletext page will be displayed (usually the index page).

If there is no teletext broadcast, the indication “No Text” is

displayed on a black screen.

3 Input three digits for the page number using the number buttons.

If you have made a mistake, type in any three digits. Then re-enter

the correct page number.

4 Press ; to return to the normal TV picture.

Accessing next or preceding page

Press R (PAGE+) or S (PAGE–).

The next or preceding page appears.

Superimposing the teletext display on the TV programme

• Press f once to get Teletext only.

• Press f twice for Mix mode.

The normal TV screen and the Teletext screen are overlapped.

• Press f again to resume normal teletext reception.

Preventing a teletext page from being updated

• Press .

The symbol “

” is displayed on the information line.

Press again to cancel.

Revealing hidden information (e.g. for a quiz)

Sometimes pages contain concealed information, such as

answers to a quiz. The reveal option lets you disclose the

information.

Press

. Press again to cancel.

RM-862

A

b

a/Å

´/´

;

8



0

+

_

CH

?

MDP2

TV

VIDEO

3VTR 1

( u)

p Pr

PROGR

≥

¸

MENU

c

´

8

x

˚

+

;

REC

…/

Ú/;

¤

19

GB

Favourite page system

You can store up to four of your favourite teletext pages per

Teletext service. In this way you have quick access to the pages

you frequently use.

Storing pages

1 Use the number buttons to select the page you would like to store.

2 Press

twice.

The colour prompts at the bottom of the screen flash.

3 Push the joystick to the desired colour to store the selected page.

The page is now stored on this colour.

Repeat steps 1 to 3 for the other 3 pages.

Displaying the favourite pages

1 Press

.

2 Push the joystick to the colour on which the desired page is stored.

Make sure you press

, otherwise the normal Fastext facility

operates.

Using Fastext

With Fastext you can access pages with one key stroke.

When a Fastext page is broadcast, a colour-coded menu will

appear at the bottom of the screen. The colours of this menu

correspond to the red, green, yellow and blue positions on the

Remote Commander.

Push the joystick to the colour mark which corresponds to the

colour-coded menu. The page will be displayed after a few

seconds.

Note

Fastext operation is

possible, only when the

TV station broadcasts

Fastext signals.

20

C

R/D/D/D-L/G/S/I

2/

1

2

3/

3

3 3

3

MONO

L/G/S/I R/D/D/D

PROGR

R

Available output signal

Video/audio from TV tuner

Video/audio from selected source

No outputs

Video/audio from selected source (the same output

source as the :2/ q 2 connector)

Audio signal

No outputs

Connecting and Operating Optional

Equipment

To connect a VCR

using the

))

) terminal

Connect the aerial output

of the VCR to the aerial

terminal ) of the TV.

We recommend that you

tune in the video signal to

programme number “0”.

For details, see

“Presetting Channels

Manually” on page 10.

If the picture or the

sound is distorted

Move the VCR away from

the TV.

About S video Inputs

(Y/C input)

Video signals can be

separated into Y

(luminance or brightness)

and C (chrominance)

signals.

Separating the Y and C

signals prevents them

from interfering with one

another, therefore it

improves picture quality

(especially luminance).

This TV is equipped with

3 S Video input jacks,

through which these

separated signals can be

input directly.

When connecting a

monaural VCR

Connect only the white

≤ jack to both the TV

and VCR.

Note

When you connect the

equipment to the q3/

…3/≤3 connectors on

the front panel and :3/

q3 connector on the

rear panel, turn off the

power of the equipment

not in use.

Connecting Optional Equipment

You can connect optional audio-video equipment to this TV such as a

VCR, video disc player, and stereo system.

1

3

2

4

3

5

Acceptable input signal

1 Normal audio/video and RGB signal

2 Normal audio/video and S video signal

3 Normal audio/video and S video signal

Normal audio/video and S video signal

4 No inputs

5 Centre speaker input

Set “Speaker” on the SOUND

CONTROL menu to “Centre in”.

Sayfa yükleniyor ...

Sony KP-41S5 El kitabı

Sony KP-41S5 El kitabı

Diğer dillerde

İlgili Makaleler

Diğer Belgeler