Samsung LE46N71B Kullanım kılavuzu

LCD TV

LE32N7

LE40N7

LE46N7

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

Register your product at www.samsung.com/global/register

BN68-01047M-01

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care centre.

Kontakt SAMSUNG

Om du har några frågor eller synpunkter om Samsungs produkter,

är du välkommen att kontakta Samsung Support.

Kontakt SAMSUNG

Hvis du har spørgsmål eller kommentarer vedrørende Samsung produkter,

venligst kontakte Samsung Support.

Kontakt SAMSUNG

Om du har spørsmål eller synspunkter om Samsungs produkter,

er du velkommen å kontakte Samsung Support.

Ota yhteyttä Samsungiin

Jos sinulla on kysymyksiä tai kommentteja koskien Samsung tuotteita

voitte ottaa yhtyettä Samsung tukeen.

Dünyanın her yerinden SAMSUNG’a ulaşın.

Samsung ürünleri ile ilgili sorularınız ya da yorumlarınız varsa lütfen SAMSUNG

müşteri hizmetleri merkezi ile temasa geçin.

Country

BELGIUM

CZECH REPUBLIC

DENMARK

FINLAND

FRANCE

GERMANY

HUNGARY

ITALIA

LUXEMBURG

NETHERLANDS

NORWAY

POLAND

PORTUGAL

RUSSIA

SLOVAKIA

SPAIN

SWEDEN

U.K

UKRAINE

Customer Care Center

02 201 2418

844 000 844

38 322 887

09 693 79 554

08 25 08 65 65 (€ 0,15/Min)

01805 - 121213 (€ 0,12/Min)

06 40 985 985

199 153 153

02 261 03 710

0900 20 200 88 (€ 0.10/Min)

231 627 22

0 801 801 881

80 8 200 128

8-800-200-0400

0850 123 989

902 10 11 30

08 585 367 87

0870 242 0303

8-800-502-0000

Web Site

www.samsung.com/be

www.samsung.com/cz

www.samsung.com/dk

www.samsung.com/fi

www.samsung.com/fr

www.samsung.de

www.samsung.com/hu

www.samsung.com/it

www.samsung.lu

www.samsung.com/nl

www.samsung.com/no

www.samsung.com/pl

www.samsung.com/pt

www.samsung.ru

www.samsung.com/sk

www.samsung.com/es

www.samsung.com/se

www.samsung.com/uk

www.samsung.com/ur

BN68-01047M-01Cover.indd 1BN68-01047M-01Cover.indd 1 2006-08-23  1:51:092006-08-23  1:51:09

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of

the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect

to the screen. Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Att tänka på vid visning av stillbild

Stillbilden kan orsaka permanenta skador på bildskärmen.

• Visa inte en stillbild på skärmen i mer än två timmar, eftersom det kan leda till att bilden ligger kvar på skärmen.

Att bilden på skärmen behålls kallas även “bildskärmsbränning”.

Du kan undvika att bilden behålls genom att minska på ljusstyrkan och kontrasten på bildskärmen när du visar stillbilder.

• Användning av LCD TV:n i 4:3-format under en längre tid kan lämna spår av kanterna till vänster, höger och mitt på skärmen

vilket orsakas av skillnaden i ljusstrålning i skärmen. Uppspelning av en DVD eller tv-spel kan orsaka samma effekter på skärmen.

Skador som orsakas av det som beskrivs ovan täcks inte av garantin.

• Visning av stillbilder från tv-spel och datorer längre stunder kan skapa delvisa efterbilder.

För att förhindra detta ska du minska på ljusstyrka och kontrast vid visning av stillbilder.

Forholdsregler for visning af et stillbillede

Et stillbillede kan medføre permanent beskadigelse af tv-skærmen.

• Vis ikke et stillbillede på LCD-panelet i mere end to timer, da det kan medføre billedindbrænding.

Denne billedindbrænding kaldes også “screen burn”.

For at undgå dette skal lysstyrken og kontrasten ved visning af et stillbillede reduceres.

• Hvis du ser LCD-tv i 4:3-format i lang tid, kan der opstå kanter, der vises til venstre, højre og på midten af skærmen.

Dette skyldes den forskellige lyspåvirkning af skærmen. Afspilning af dvd eller brug af en spillekonsol kan medføre en tilsvarende

effekt på skærmen. Beskadigelse forårsaget af ovenstående dækkes ikke af forsikringen.

• Visning af stillbilleder fra videospil og pc i længere end en bestemt tid kan medføre delvise after-billeder.

For at forhindre dette kan du reducere ‘lysstyrke’ og ‘kontrast’, når du afspiller stillbilleder i længere tid.

Forholdsregler ved visning av et stillbilde

Et stillbilde kan forårsake permanent skade på TV-skjermen.

• La ikke et stillbilde vises på LCD-panelet i mer enn 2 timer, da det kan forårsake et ekkobilde.

Denne effekten er også kjent som “screen burn”, det vil si at skjermbildet brenner seg fast.

Du kan unngå dette ved å redusere lysstyrken og kontrastnivået på skjermen når du viser stillbilder.

• Dersom LCD-skjermen brukes til visning i 4:3-format over lengre tid, kan dette føre til at det oppstår linjer til høyre, venstre og i midten

av skjermen. Dette på grunn av forskjeller mellom lysstrålingen på de forskjellige stedene på skjermen. Dersom skjermen brukes til

videospill og visning av DVDer kan dette gi liknende resultater. Skader forårsaket av effekten ovenfor, dekkes ikke av garantien.

• Dersom spill og annet settes på pause i en lengre periode enn det som er anbefalt, kan dette gi en etterbildeeffekt.

Denne virkningen kan forebygges ved at ‘lysstyrke’ og ‘kontrast’ reduseres ved visning av stillbilder.

Varoituksia pysäytyskuvan käytöstä

Pysäytyskuva voi vaurioittaa television kuvaruutua pysyvästi.

• Älä pidä nestekidetelevision kuvaruudussa pysäytyskuvaa 2 tuntia kauempaa, koska tällöin kuva voi jäädä ruutuun pysyväksi jäännöskuvaksi.

Jäännöskuvaa kuvataan myös “kuvan palamiseksi kuvaruutuun”.

Kun kuvaruudussa on pysäytyskuva, vähennä kirkkautta ja kontrastia, jottei jäännöskuvaa pääsisi muodostumaan.

• LCD-television pitkäaikainen katselu 4:3 kuvasuhteella saattaa jättää kuvaruudulle reunuksia, jotka johtuvat valon säteilyn

eroavuudesta kuvaruudulla. DVD:n tai pelin toisto saattaa aiheuttaa samanlaisen vaikutuksen näytöllä.

Takuu ei kata tästä syystä syntyneitä vaurioita.

• Videopelien ja pc:n still-kuvien määrätyn ajan ylittävä näyttö saattaa aiheuttaa osittaisia jälkikuvia.

Voit estää tämän ilmiön vähentämällä kuvaruudun kirkkautta ja kontrastia, jos katselet pitkään pysäytyskuvia.

Sabit Görüntünün Gösterilmesiyle ilgili Önlemler

Sabit görüntü TV ekranında kalıcı hasara neden olabilir.

• LCD ekran panelinde sabit bir görüntüyü 2 saatten fazla tutmay›n.

Bu, ekran görüntüsünde takılmaya neden olabilir. Bu görüntü takılmasına, “ekran yanması” da denir.

Bu tür bir kalıcı görüntüyü önlemek için hareketsiz bir görüntü ekrandayken parlaklık ve kontrast değerlerini düﬂük bir seviyeye ayarlayınız.

• LCD televizyonu uzun süre 4:3 formatında izlemek, farklı ıﬂık emisyonundan dolayı ekranın solunda, sağında ve ortasında çizgi

ﬂeklinde izler bırakabilir. DVD ya da oyun konsolunu oynatmak da benzer etkiye yol açabilir. Yukarıdaki etkilerin neden olduğu

hasarlar Garanti kapsamında değildir.

• Video oyunlarından ve bilgisayardan uzun süre durağan resimlerin görüntülenmesi kısmi görüntü izi oluﬂturabilir.

Bu etkiyi önlemek için, durağan görüntüleri ekranda tutarken ‘parlaklık’ ve ‘kontrast’ derecelerini azaltın.

Bukgu-Still.indd 1Bukgu-Still.indd 1 2006-08-10  3:15:532006-08-10  3:15:53

English

English-1

Contents

CONNECTING AND PREPARING YOUR TV

List of Parts....................................................................................... 2

Installing the Stand ................................................................. 2

Installing the Wall Mount Kit ................................................ 2

Viewing the Control Panel ......................................................... 3

Viewing the Connection Panel ................................................. 4

Viewing the Remote Control ..................................................... 6

Installing Batteries in the Remote Control ........................... 6

Switching On and Off .................................................................. 7

Placing Your Television in Standby Mode ............................. 7

Plug & Play ....................................................................................... 7

SETTING THE CHANNELS

Storing Channels Automatically .............................................. 8

Storing Channels Manually ........................................................ 8

Setting the Channel Manager .................................................. 9

Activating the Child Lock ...................................................... 10

Sorting the Stored Channels ..................................................... 10

Assigning Channels Names ....................................................... 11

Fine Tuning Channel Reception ............................................... 11

SETTING THE PICTURE

Changing the Picture Standard ................................................ 12

Adjusting the Custom Picture................................................... 12

Changing the Colour Tone ......................................................... 13

Adjusting the Color Tone with the Preferred

Color Component .......................................................................... 13

Resetting the Picture Settings to the

Factory Defaults ............................................................................. 14

Changing the Picture Size .......................................................... 14

Changing the Auto Wide (4:3) .................................................. 14

Freezing the Current Picture ..................................................... 15

Digital Noise Reduction .............................................................. 15

DNIe Demo (Digital Natural Image engine) ........................ 15

Changing the Colour Space....................................................... 15

Viewing the Picture In Picture (PIP) ........................................ 16

SETTING THE SOUND

Changing the Sound Standard ........................................... 17

Adjusting the Sound Settings ............................................. 17

Setting the TruSurround XT (SRS TSXT) ........................... 17

Adjusting the Volume Automatically ................................ 18

Selecting the Internal Mute .................................................. 18

Listening to the Sound of the Sub Picture...................... 18

Resetting the Sound Settings to the

Factory Defaults ........................................................................ 19

Connecting Headphones ...................................................... 19

Selecting the Sound Mode ................................................... 19

SETTING THE TIME

Setting and Displaying the Current Time ........................ 20

Setting the Sleep Timer.......................................................... 21

Switching the Television

On and Off Automatically ..................................................... 21

SETTING THE OTHERS

Choosing Your Language ...................................................... 21

Using Game Mode ................................................................... 21

Setting the Blue Screen Mode /

Selecting the Melody ............................................................. 22

Using the Energy Saving Feature ....................................... 22

Setting the Blue Eye ................................................................ 22

Selecting the Source ............................................................... 23

Editing the Input Source Names ........................................ 23

WISELINK

Using the WISELINK Function .............................................. 24

Using the WISELINK Menu .................................................... 25

Using the PHOTO (JPEG) List ................................................ 25

Viewing Photo File Information .......................................... 27

Selecting a Photo and Slide Show ..................................... 27

Rotating ....................................................................................... 28

Zooming-in ................................................................................. 29

Copying Image Files ................................................................ 30

Deleting Image Files................................................................ 30

Printing a Photo ........................................................................ 31

Using the MP3 List ................................................................... 31

Copying Music Files ................................................................. 32

Deleting Music Files ................................................................ 32

Using the Setup Menu ........................................................... 33

USING THE TELETEXT FEATURE

Teletext Decoder ...................................................................... 34

Displaying the Teletext Information .................................. 34

Selecting a Specific Teletext Page ...................................... 35

Using Fastext to Select a Teletext Page ............................ 35

Setting Up Your Remote Control ........................................ 36

Remote Control Codes ........................................................... 38

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ......................................................... 41

Display Modes ........................................................................... 41

Setting the PC ............................................................................ 42

RECOMMENDATIONS FOR USE

Using the Anti-Theft Kensington Lock ............................. 42

Troubleshooting:

Before Contacting Service Personnel ............................... 42

Technical and Environmental Specifications ................ 44

Symbol Press Important Note One-Touch

Button

English

BN68-01047L-00Eng.indd 1BN68-01047L-00Eng.indd 1 2006-08-14  12:56:192006-08-14  12:56:19

English-2

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

Remote Control &

Batteries (AAA x 2)

Power Cord Cover-Bottom

Stand Screw X4 Stand

Cleaning Cloth



Owner’s Instructions

 Warranty card  Safety Guide  Registration Cards

< 2 >< 3 >

1. Place the TV faced down on a soft cloth or cushion on a table.

2. Put the stand into the hole at the bottom of the TV.

3. Insert screw into the hole indicated and tighten.

The stand is installed for models with the screen size of 40 inch and above.

Installing the Stand

Warranty card / Safety Guide / Registration Cards (Not available in all locations)

The stand and stand screw may not be included depending on the model.

Wall mount items (sold separately) allow you to mount

the TV on the wall.

For detailed information on installing the wall mount,

see the instructions provided with the Wall Mount items.

Contact a technician for assistance when installing the

wall mounted bracket.

Samsung Electronics is not responsible for any damage to

the product or injury to yourself or others

if you elect to install the TV on your own.

Remove the stand and cover the bottom hole with a

cap and fasten with two screws.

Installing the Wall Mount Kit

M4 X L16

BN68-01047L-00Eng.indd 2BN68-01047L-00Eng.indd 2 2006-08-14  12:56:292006-08-14  12:56:29

English-3

Viewing the Control Panel

SOURCE

Toggles between all the available input sources

(TV, Ext.1, Ext.2, AV, S-Video, Component, PC,

HDMI1, HDMI2). In the on-screen menu,

use this button as you use the ENTER

button

on the remote control.

MENU

Press to see an on-screen menu of

your TV’s features.

Press to decrease or increase the volume.

In the on-screen menu, use the

buttons

as you use the  and  buttons on the remote

control.

Press to change channels.

In the on-screen menu, use the

buttons

as you use the  and  buttons on the remote

control.

(Without the Remote Control, you can turn on

the TV by using the Channel buttons.)

Speakers

(

Power)

Press to turn the TV on and off.

Power Indicator

Blinks and turns off when the power is on and lights

up in stand-by mode.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

The product colour and shape may vary depending on the model.

BN68-01047L-00Eng.indd 3BN68-01047L-00Eng.indd 3 2006-08-14  12:56:312006-08-14  12:56:31

English-4

Viewing the Connection Panel

Power Input

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

[Side Panel Jacks]

[Rear Panel Jacks]

BN68-01047L-00Eng.indd 4BN68-01047L-00Eng.indd 4 2006-08-14  12:56:322006-08-14  12:56:32

English-5

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

Connecting HDMI/DVI

-

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).

- No additional Audio connection is needed for an HDMI to HDMI connection.

What is HDMI?

- “High Definition Multimedia Interface” allows the transmission of high definition digital video data and multiple

channels of digital audio ( 5.1 channels).

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP

(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal

on DVI for sound output.

- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that

it has been set to a compatible video output mode as shown in the table below.

Failure to observe this may result in picture distortion, image breakup or no picture.

Supported modes for DVI or HDMI

- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.

(This will result in a blank screen being displayed)

Connecting Set-Top Box, VCR or DVD

-

Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.

- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD)

and connect the VCR (or DVD) to your set.

Connecting External A/V Devices

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out

connectors on the A/V device.

- Headphone may be connected to the headphone output (

) on the rear of your set.

While the headphone is connected, the sound from the built-in speakers will be disabled.

SERVICE

- Service connection for qualified service engineer.

Connecting AUDIO

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in

connectors on the Amplifier or DVD Home Theater.

Connecting Computer

-

Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.

- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the

sound card on your computer.

Connecting Component Devices (DTV/DVD)

- Connect component video cables (optional) to component connector (“PR”, “ P B”, “Y”) on the rear of your set and the other

ends to corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)

and connect the DTV (or DVD) to component connector (“P

R”, “ P B”, “Y”) on your set.

-

The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio

out connectors on the DTV or DVD.

- This LCD TV displays its optimum picture resolution in 720p mode.

- This LCD TV displays its maximum picture resolution in 1080i mode.

Kensington Lock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

-

The place of the Kensington Lock may be different depending on its model.

50 Hz

60 Hz

Component

480i

X

O

480p

O

576i

X

O

576p

O

X

O

720p

O

1080i

O

BN68-01047L-00Eng.indd 5BN68-01047L-00Eng.indd 5 2006-08-14  12:56:322006-08-14  12:56:32

English-6

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batterie

s.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a

long time. The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Installing Batteries in the Remote Control

Selects a target device to be

controlled by the Samsung remote

control

(TV, DVD, STB, CABLE, VCR)

(Refer to page 36~40)

Television Standby button

Number buttons for direct

channel access

One/Two-digit channel selection

It displays "Channel Manager"

on the screen.

Selects the TV mode directly

VCR/DVD Functions

Rewind, Stop, Play/Pause,

Fast/Forward

Volume increase

Volume decrease

Temporary sound switch-off

Menu display and

change confirmation

Picture-In-Picture On / Off

Picture effect selection

Sound effect selection

Sound mode selection

SRS TSXT selection

SET: Adjusts 5 separate devices - TV,

DVD, STB, CABLE, or VCR.

RESET: When your remote does not

work, change the batteries and press

the “RESET” button for 2-3 seconds

before use.

Available source selection

When pressing this button, a number of

buttons on the remote control (e.g.

Selects a target device, volume, channel and

MUTE buttons) light up for a few seconds and

then turn off to save power. This function is

to conveniently use the remote control at

night or when dark.

Previous channel

Automatic Power-off

This function enables you to load saved

photo (JPEG) and audio files (MP3)

and to view or play them on the TV.

P : Next channel

P

: Previous channel

Exit the OSD

Control the cursor in the menu

Use to see information on the

current broadcast

Picture size selection

Selects the PC mode directly

Picture freeze

Input source selection

Teletext Functions

Exit from the Teletext display

Teletext index

Teletext hold

Teletext size selection

Teletext store

Teletext mode selection (LIST/FLOF)

Teletext sub page

P : Teletext next page

P

: Teletext previous page

Teletext cancel

Teletext reveal

Alternately select Teletext, Double, or Mix.

Fastext topic selection

The performance of the remote control may be affected by bright light.

This is a special remote control for the visually impaired, and has Braille points on the

Power, Channel and Volume buttons.

Viewing the Remote Control

BN68-01047L-00Eng.indd 6BN68-01047L-00Eng.indd 6 2006-08-14  12:56:332006-08-14  12:56:33

English-7

Switching On and Off

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful

when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER

button on the remote control.

The screen is turned off and a blue standby indicator appears on the front of your set.

2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel

up/down (

/ ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial.

Placing Your Television in Standby Mode

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2. Press the button on the front of the set.

You also can press the POWER button or the

TV

( ) button on the remote control to turn the TV on.

The programme that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or

button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4. To switch your set off, press the POWER button again.

When the TV is initially powered on, several basic settings proceed

automatically and subsequently. The following settings are available.

1. Press the POWER button on the remote control.

The message “Start Plug & Play” is displayed with “OK” selected.

2. Select the appropriate language by pressing the  or  button.

Press the ENTER button to confirm your choice.

3. The message “Check antenna input.” is displayed with “OK” selected.

Press the ENTER button.

Please check that the antenna cable is connected correctly.

4. Select the appropriate country by pressing the  or  button.

Press the ENTER button to confirm your choice.

5. The “Auto Store” menu is displayed with the “Start” selected.

Press the ENTER button.

The channel search will start and end automatically.

After all the available channels are stored, the “Clock Set” menu appears.

Press the

ENTER

button at any time to interrupt the memorization process.

6. Press the ENTER button.

Select the “Hour” or “Minute” by pressing the

 or 

button.

Set the “Hour” or “Minute” by pressing the

 or 

button.

You can also set the hour and minute by pressing the number buttons on the remote control.

7. Press the ENTER button to confirm your setting.

Plug & Play

 Language: Select your language.

 Country: Select your country.

 Auto Store: Automatically scans for and stores channels available in the local area.

 Clock Set: Sets the current time for the TV clock.

BN68-01047L-00Eng.indd 7BN68-01047L-00Eng.indd 7 2006-08-14  12:56:362006-08-14  12:56:36

English-8

You can store up to 100 channels, including those received via cable networks.

When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you wish to identify.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the

ENTER button.

2. Press the  or  button to select “Manual Store”, then press the

ENTER button.

3. Press the

ENTER button to select “Programme”.

4. To assign a programme number to a channel, find the correct number by pressing the  or  button

and then press the

ENTER button.

You can also set a programme number by pressing number buttons on the remote control.

Storing Channels Manually

- Storing Channels Automatically

- Storing Channels Manually

If you want to reset this feature...

1. Press the MENU button to display the menu.

Press the  or 

button

to select “Setup”, then press the

ENTER

button.

2. Press the ENTER button again, to select “Plug & Play”.

3. The message “Start Plug & Play” is displayed.

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically

allocated programme numbers may not correspond to actual or desired programme

numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the

ENTER button.

2. Press the ENTER button to select “Country”.

3. Select the appropriate country by pressing the  or  button.

Press the ENTER button to confirm your choice.

4. Press the  or  button to select “Auto Store”, then press the

ENTER button.

5. Press the ENTER button.

The TV will begin memorizing all of the available channels.

Press the

ENTER

button at any time to interrupt the memorization process and return to the “Channel” menu.

6. After all the available channels are stored, the “Sort” menu appears.

Storing Channels Automatically

BN68-01047L-00Eng.indd 8BN68-01047L-00Eng.indd 8 2006-08-14  12:56:372006-08-14  12:56:37

English-9

 Programme: Selects a program number for the channel.

 Colour System: Sets the colour supporting system.

 Sound System: Sets the sound supporting system.

 Channel: Selects a channel.

 Search: Scans for the frequency value for the channel.

 Store: Saves your settings.

Set the channels according to your preference.

You can easily delete, add, or lock the channel you want.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

ENTER button.

2.

Press the  or  button to select “Channel Manager”,

then press the ENTER button.

3.

Press the ENTER button again, to select “Channel Manager”.

4

.

Press the  button to select “ ” line.

5

.

Press the  or  button to select the undesired channel,

then press the ENTER button to cancel.

6. Repeat steps 5 for each channel to be selected or canceled

7. Press the EXIT button to exit.

“ ”

is active when “Child Lock” is selected to “On”.

Setting the Channel Manager

You can select these options by

simply pressing the CH MGR

button on the remote control.

5. Press the  or  button to select “Colour System”, then press the ENTER button.

6. Select the colour standard required by pressing the  or  button then, press the

ENTER button.

7. Press the  or  button to select “Sound System”, then press the

ENTER button.

8. Select the sound standard required by pressing the  or  button, then press the

ENTER button.

If there is an abnormal sound or no sound, re-select the sound system required.

9.

If you know the number of the channel to be stored, press the  or  button to select “Channel”. Press the ENTER button.

Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel.

Select the required number by pressing the  or  button and then press the

ENTER button.

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)

You can also set a channel number by pressing number buttons on the remote control.

10. If you do not know the channel numbers, press the  or  button to select “Search”.

Press the ENTER button. Search by pressing the  or  button and then press the ENTER button.

11. Press the  or  button to select “Store”. Press the ENTER button to select “OK”.

12. Repeat steps 3 to 11 for each channel to be stored.

BN68-01047L-00Eng.indd 9BN68-01047L-00Eng.indd 9 2006-08-14  12:56:382006-08-14  12:56:38

English-10

You can exchange the numbers of two channels, in order to:

Modify the numeric order in which the channels have been

automatically stored.

Give easily remembered numbers to the channels that you watch

most often.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

ENTER button.

2.

Press the  or  button to select “Sort”, then press the

ENTER

button.

3.

Select channel number that you wish to change by pressing the

 or  button repeatedly. Press the ENTER button.

The selected channel number and name are moved to right side.

4.

Press the

 or 

button to move to the position in which you would like to

change and then press the

ENTER

button.

The selected channel is exchanged with the one previously stored to the chosen

number.

5.

Repeat steps 3 to 4 for another channel to be sorted.

6.

Press the EXIT button to exit.

Sorting the Stored Channels

This feature allows you to prevent unauthorized users, such as children, from

watching unsuitable programmes by muting out video and audio. Child Lock can-

not be released using the buttons on the side.

Only the remote control can release the Child Lock setting, so keep the remote

control away from children.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

ENTER button.

2.

Press the  or  button to select “Channel Manager”,

then press the ENTER button.

3.

Press the  or  button to select “Child Lock”,

then press the ENTER button.

4.

Press the  or  button to select “On”. Press the

ENTER

button.

5.

Press the  or  button to select “Channel Manager”,

then press the

ENTER button.

6

.

Press the  button to select “ ” line.

7

.

Press the  or  button to select the channels you want to lock,

then press the ENTER button.

8. Repeat steps 7 for each channel to be locked or unlocked.

9. Press the EXIT button to exit.

Select “On” or “Off” in “Child Lock” to easily turn the channels which

selected on

“ ”

to be active or inactive.

Activating the Child Lock

BN68-01047L-00Eng.indd 10BN68-01047L-00Eng.indd 10 2006-08-14  12:56:392006-08-14  12:56:39

English-11

Use fine tuning to manually adjust a particular channel for optimal reception.

1. Use the number buttons to directly select the channel that

you want to fine tune.

2. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the ENTER button.

3. Press the  or  button to select “Fine Tune”, then press the

ENTER button.

4. Press the  or  button to adjust the fine tuning.

Press the

ENTER

button.

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk “

*

” on the right-hand

side of the channel number in the channel banner. And the channel number turns red.

To reset the fine-tuning, select “Reset” by pressing the  or  button and then press the

ENTER button.

Fine Tuning Channel Reception

Channel names will be assigned automatically when channel

information is broadcast.

These names can be changed, allowing you to assign new names.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

ENTER button.

2.

Press the  or  button to select “Name”, then press the

ENTER

button.

3.

If necessary, select the channel to be assigned to a new name by

pressing the

 or 

button. Press the ENTER button.

The selection bar is displayed around the name box.

4.

The characters available are :

Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters (

-

, space)

5.

Repeat steps 3 to 4 for each channel to be assigned to a new name.

6.

Press the EXIT button to exit.

Assigning Channels Names

To...

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

Then...

Press the

 or 

button

Press the



button

Press the



button

Press the ENTER button

BN68-01047L-00Eng.indd 11BN68-01047L-00Eng.indd 11 2006-08-14  12:56:402006-08-14  12:56:40

English-12

You can select the type of picture which best corresponds to your viewing

requirements.

1. Press the MENU button to display the menu. Press the  or 

button to select “Picture”, then press the

ENTER button.

2.

Press the ENTER button again, to select “Mode”.

Press the

ENTER button again.

3.

Press the

 or 

button to select the desired picture effect.

Press the

ENTER

button.

4.

Press the EXIT button to exit.

 Dynamic: Selects the picture for high-definition in a bright room.

 Standard: Selects the picture for optimum display in a normal environment.

 Movie: Selects the picture for comfortable display in a dark room.

 Custom: Select to view your favorite display settings.

(Refer to “Adjusting the Custom Picture”)

You can also press the

P.MODE button on the remote

control to select one of the

picture settings.

The Picture mode must be adjusted separately for each input source.

You can return to the factory defaults picture settings by selecting the “Reset”.

(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 14)

Changing the Picture Standard

 Contrast: Adjusts the lightness and darkness between objects and the background.

 Brightness: Adjusts the brightness of the whole screen.

 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.

 Colour: Adjusts the colours, making them lighter or darker.

 Tint (NTSC only):

Adjusts the colour of objects, making them more red or green for a more natural look.

Your set has several settings which allow you to control picture quality.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3.

2.

Press the

 or  button

to select a particular item.

Press the

ENTER

button.

3.

Press the

 or  button

to decrease or increase the value of a

particular item.

Press the ENTER button.

4.

Press the EXIT button to exit.

Adjusting the Custom Picture

The adjusted values are stored according to the selected Picture mode.

In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted

BN68-01047L-00Eng.indd 12BN68-01047L-00Eng.indd 12 2006-08-14  12:56:402006-08-14  12:56:40

English-13

The adjusted values are stored according to the selected Picture mode.

You can select the most comfortable colour tone to your eyes.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

2.

Press the  or  button to select “Colour Tone”, then press the ENTER button.

3.

Press the

 or  button

to select the desired colour tone setting.

Press the

ENTER

button.

4.

Press the EXIT button to exit.

Changing the Colour Tone

 Cool2: Makes the colour temperature bluer

than “Cool1” menu.

 Cool1: Makes whites bluish.

 Normal: Keeps whites white.

 Warm1: Makes whites reddish.

 Warm2: Makes the colour temperature

redder than “Warm1” menu.

You can adjust a picture’s color tone with your preferred color component.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

2.

Press the  or  button to select “Colour Manager”,

then press the ENTER button.

3.

Press the

 or  button

to select a particular item.

Press the

ENTER

button.

4.

Press the

 or  button

to decrease or increase the value of a

particular item.

Press the ENTER button.

5.

Press the EXIT button to exit.

Adjusting the Color Tone with the Preferred Color Component

 R Contrast:

Lightens or intensifies the red component of the border between objects and

the background.

 G Contrast:

Lightens or intensifies the green component of the border between objects

and the background.

 B Contrast:

Lightens or intensifies the blue component of the border between objects and

the background.

 R Brightness:

Adjusts the brightness of the red component for the entire screen.

 G Brightness:

Adjusts the brightness of the green component for the entire screen.

 B Brightness:

Adjusts the brightness of the blue component for the entire screen.

 Reset:

Resets all settings to the defaults.

You cannot select a "Colour Tone" in the "Colour Manager".

BN68-01047L-00Eng.indd 13BN68-01047L-00Eng.indd 13 2006-08-14  12:56:412006-08-14  12:56:41

English-14

 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.

 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

 WIDE 4:3 : Magnify the size of the picture more than 4:3.

 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

 4:3: This is the default setting for a video movie or normal broadcasting.

You can select these options

by simply pressing the P.SIZE

button on the remote control.

Adjusts the display picture size to 4:3 appropriate for input signal

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Auto Wide (4:3)”, then press the

ENTER button.

3. Select the required option by pressing the  or  button.

Press the

ENTER

button.

4.

Press the EXIT button to exit.

Changing the Auto Wide (4:3)

You can select the picture size which best corresponds to your

viewing requirements.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Size”, then press the ENTER button.

3. Select the required option by pressing the  or  button.

Press the

ENTER

button.

4.

Press the EXIT button to exit.

Changing the Picture Size

These functions don’t work in "Component", "PC", "HDMI1", and "HDMI2" mode.

You can return to the factory defaults picture settings.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

2. Press the  or  button to select “Reset”, then press the ENTER button.

3.

Press the EXIT button to exit.

The “Reset” will be set for each picture mode.

Resetting the Picture Settings to the Factory Defaults

 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

 WIDE 4:3 : Magnify the size of the picture more than 4:3.

 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

 4:3: This is the default setting for a video movie or normal broadcasting.

“Auto Wide” function is available only in "TV", "Ext1", "Ext2", "AV", and "S-Video" mode.

In PC Mode, only “16:9” and “4:3” mode can be adjusted.

Zoom : Select by pressing the  or  buttons. Use the  or  button to move the

picture up and down. After selecting , use the  or  button to magnify or

reduce the picture size in the vertical direction.

WIDE 4:3 : Move the screen up/down using the  or  button after selecting the

by pressing the  or ENTER button.

BN68-01047L-00Eng.indd 14BN68-01047L-00Eng.indd 14 2006-08-14  12:56:422006-08-14  12:56:42

English-15

If the broadcast signal received by your TV is weak, you can activate the Digital

Noise Reduction feature to help reduce any static and ghosting that may appear

on the screen.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Digital NR”, then press the ENTER button.

3.

Press the  or  button to select “On” or “Off”. Press the

ENTER

button.

4. Press the EXIT button to exit.

Digital Noise Reduction

Samsung’s new technology brings you more detailed images with

contrast and white enhancement. A new image compensation algorithm gives

viewers brighter and clearer images. DNIe technology will match every signal to

your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode

to On.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “DNIe Demo”, then press the ENTER button.

3.

Press the  or  button to select “On” or “Off”. Press the

ENTER

button.

4. Press the EXIT button to exit.

These functions don’t work in PC mode.

The DNle Demo is designed to show the difference between the regular and

DNIe pictures.

By default, the product displays the picture with DNle applied.

DNIe Demo (Digital Natural Image engine)

Press the STILL

button to freeze a moving picture into a still one.

Press again to cancel.

Freezing the Current Picture

Colour space is a colour matrix composed of red, green, and blue colours. Select

your favorite colour space and experience the world of natural colour.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Colour Space”, then press the ENTER button.

3.

Press the  or  button to select “Wide” or “Auto”.

Press the

ENTER

button.

4. Press the EXIT button to exit.

Changing the Colour Space

 Wide : Wide Colour Space offers deep and rich colour tone.

 Auto : Auto Colour Space automatically adjusts to natural colour tone based on program

sources.

BN68-01047L-00Eng.indd 15BN68-01047L-00Eng.indd 15 2006-08-14  12:56:432006-08-14  12:56:43

English-16

You can display a sub picture within the main picture of set

programme or video input. In this way, you can watch the picture of set pro-

gramme or video input from any connected equipment while watching the main

picture.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2.

Press the  or  button to select “PIP”, then press the

ENTER

button.

3. Press the ENTER button again.

Press the  or  button to select “On”, then press ENTER button.

If the PIP is activated, the size of the main picture turns to “16:9”.

4. Press the  or  button to select “Source”,

then press ENTER button. Select a source of the sub picture by

pressing the  or  button and press the ENTER button.

The sub picture can serve different source selections based on what the main picture is set to.

5. Press the  or  button to select “Swap”.

To interchange the main picture and the sub picture, select “Swap” option and

press the ENTER button.

The main picture and the sub picture are interchanged.

I

f main picture is in “PC” mode, “Swap” is not available.

6. Press the  or  button to select “Size” of the sub picture and then

press the ENTER button. Select a size of the sub picture by

pressing the  or  button and then press the ENTER button.

If main picture is in “PC” mode, “Size” is not available.

7. Press the  or  button to select “Position”, then press the ENTER

button. Select the position of the sub picture by pressing the  or 

button and then press the ENTER button.

8. Press the  or  button to select “Programme” and then press the ENTER

button. You can select the channel that you want to view through sub picture

by pressing the  or  button.

Press the ENTER button.

The “Programme” can be active when the sub picture is set to TV.

9. Press the EXIT button to exit.

You may notice that the picture in the PIP window becomes slightly unnatural when you use

the main screen to view a game or karaoke.

Viewing the Picture In Picture (PIP)

Press the PIP button on the

remote control repeatedly to

activate or deactivate the “PIP”.

PIP Settings

(O: PIP operates, X: PIP doesn’t operate)

 Source: Used to select a source of the sub picture.

 Swap: Used to interchange the main picture and the

sub picture.

 Size: Used to select a size of the sub picture.

 Position: Used to move the sub picture.

 Programme: Used to Change the sub picture.

TV

Ext.1

Ext.2

AV

S-Video

Component

PC

HDMI1

HDMI2

TV

X

O

Ext.1

X

O

Ext.2

X

O

AV

X

O

S-Video

X

O

Component

X

O

PC

X

HDMI1

O

X

HDMI2

O

X

Sub

Main

BN68-01047L-00Eng.indd 16BN68-01047L-00Eng.indd 16 2006-08-14  12:56:452006-08-14  12:56:45

English-17

You can select the type of the special sound effect to be used when watching a

given broadcast.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the ENTER button.

2. Press the

ENTER button again, to select “Mode”.

3. Select the required sound effect by pressing the  or  button repeatedly

and then press the ENTER button.

4. Press the EXIT button to exit.

 Standard: Selects the normal sound mode.

 Music: Emphasizes music over voices.

 Movie: Provides live and full sound for movies.

 Speech: Emphasizes voices over other sounds.

 Custom: Selects your custom sound settings.

(Refer to “Adjusting the Sound Settings”)

Changing the Sound Standard

You can also select these options by

simply pressing the S.MODE button on

the remote control.

The sound settings can be adjusted to suit your personal preferences.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the ENTER button.

2. Press the  or  button to select “Equalizer”, then press the ENTER button.

3.

Press the

 or  button

to select a particular item.

Press the

ENTER

button.

4. Press the  or  button to reach the required setting.

Press the ENTER button.

5. Press the EXIT button to exit.

If you make any changes to these settings, the Sound Mode is automatically switched to

“Custom”.

Adjusting the Sound Settings

TruSurround XT is a patented SRS technology that solves the problem of playing

5.1 multichannel content over two speakers.

TruSurround delivers a compelling,virtual surround sound experience through any

two-speaker playback systems, including internal television speakers. It is fully

compatible with all multichannel formats.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the ENTERbutton.

2. Press the  or  button to select “SRS TSXT”, then press the ENTER button.

3.

Press the  or  button to select “On” or “Off”. Press the

ENTER

button.

4. Press the EXIT button to exit.

Setting the TruSurround XT (SRS TSXT)

You can also set these options

simply by pressing the SRS button on

remote control.

TruSurround XT, SRS and

symbol are trademarks of

SRS Labs, Inc. TruSurround XT technology is incorporated under license

from SRS Labs, Inc.

BN68-01047L-00Eng.indd 17BN68-01047L-00Eng.indd 17 2006-08-14  12:56:462006-08-14  12:56:46

English-18

If you want to hear the sound through separate speakers, cancel the internal

amplifier.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the ENTER

button.

2. Press the  or  button to select “Internal Mute”, then press the ENTER

button.

3.

Press the  or  button to select “On” or “Off”. Press the

ENTER

button.

4. Press the EXIT button to exit.

When “Internal Mute” is set to “On’, the Sound menus except for

“Sound Select” (in PIP mode) cannot be adjusted.

Selecting the Internal Mute

Each broadcasting station has its own signal conditions, and so it is not easy for

you to adjust the volume every time the channel is changed.

This feature allows you to automatically adjust the volume of the desired channel

by lowering the sound output when the modulation signal is high or by raising the

sound output when the modulation signal is low.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the ENTER

button.

2. Press the  or  button to select “Auto Volume”, then press the ENTER

button.

3.

Press the  or  button to select “On” or “Off”. Press the

ENTER

button.

4. Press the EXIT button to exit.

Adjusting the Volume Automatically

Listening to the Sound of the Sub Picture

During the PIP features activation, you can listen to the sound of the sub pic-

ture.

1. Press the MENU button to display the menu. Press the  or  button to

select “Sound”, then press the ENTER button.

2. Press the  or  button to select “Sound Select”, then press the ENTER button.

3. Press the  or  button to select “Sub”. Press the ENTER button.

4. Press the EXIT button to exit.

You can select this option when the “PIP” is set to “On”.



Main: Used to listen to the sound of the main picture.



Sub: Used to listen to the sound of the sub picture.

BN68-01047L-00Eng.indd 18BN68-01047L-00Eng.indd 18 2006-08-14  12:56:472006-08-14  12:56:47

Sayfa yükleniyor ...

Samsung LE46N71B Kullanım kılavuzu

Bu kılavuz için de uygundur

Samsung LE46N71B Kullanım kılavuzu

Diğer dillerde

İlgili Makaleler

Diğer Belgeler