Blackmagic HyperDeck Extreme 8K HDR and HyperDeck Extreme Control Kullanım kılavuzu

Installation and Operation Manual

HyperDeck

Extreme 8K HDR

and HyperDeck Extreme Control

March 2020

English,

日本語, Français, Deutsch, Español, 中文,

한국어, Русский, Italiano, Português and Türkçe.

Languages

To go directly to your preferred language, simply click on the hyperlinks listed in the

contents below.

English 3

日本語 92

Français 182

Deutsch 272

Español 362

中文 452

한국어 542

Русский 632

Italiano 722

Português 812

Türkçe 902

Welcome

When we released the original Blackmagic HyperDeck disk recorders, our dream was to allow

anyone to record and play back the highest quality video using portable SSD storage. Now we are

excited to introduce HyperDeck Extreme 8K HDR!

HyperDeck Extreme 8K HDR is a professional video recording deck that records up to 8K video

using Apple ProRes and H.265 codecs. The unit features a bright and colorful HDR touchscreen

that gives you control via tap and swipe gestures plus displays scopes for professional SDR and

HDR workflows.

You can record up to 8K H.265 on CFast cards or 8K ProRes files via external disks. If you install the

optional cache feature, media speed doesn’t matter so you can record 8K video to any Cfast card or

even connect an external HDD dock via USB-C and record to an external hard drive!

A variety of video and audio sources can be connected including decks, monitors, routers and

cameras, or legacy broadcast decks via composite analog inputs, which is especially useful for

archival workflows converting from tape to file.

We also wanted to create a deck controller that works just like a traditional broadcast deck with a

search dial and familiar controls. With HyperDeck Extreme Control, you can control your HyperDeck

Extreme 8K HDR as well as broadcast decks such as Betacam SP, Digital Betacam decks and even

1 inch machines. HyperDeck Extreme Control can control up to 8 broadcast decks via industry

standard RS-422 connections and we believe you will find the experience intuitive and efficient!

This instruction manual contains all the information you need to get started with HyperDeck

Extreme 8K HDR and HyperDeck Extreme Control. Please check the support page at

www.blackmagicdesign.com for the latest version of this manual and updates to the HyperDeck

software. Keeping your software up to date will always ensure you get all the latest features.

When downloading software, please register with your information so we can keep you updated

when new software is released. We are constantly working on new features and improvements,

so we would love to hear from you!

Grant Petty

CEO Blackmagic Design

English

Getting Started with HyperDeck

Extreme 8K HDR 5

Plugging in Power 5

Plugging in Video and Audio 6

Plugging in CFast Cards 7

Recording 8

Selecting your Source and Codec 8

Starting Record 9

Playback 10

HyperDeck Extreme 8K HDR Front Panel 11

HyperDeck Extreme 8K HDR Rear Panel 13

Touchscreen Display 16

Touchscreen Features 16

Upper Toolbar 17

Lower Toolbar 24

Settings 28

Dashboard Menu 28

Record 28

Monitor 31

Audio 33

Setup 34

LUTs 40

Storage Media 42

CFast Cards 42

EXT Disk 43

Preparing Media For Recording 44

Preparing Media on a Computer 46

Storage Indicators 47

Using the Optional Internal Cache 50

Choosing your M.2 NVMe PCIe

Flash Disk 50

Installing The Cache 51

Formatting The Cache 53

Cache Icons and Status 53

Getting Started with HyperDeck

Extreme Control 53

Plugging in Power 54

Connecting HyperDeck Extreme 8K HDR 54

Enabling Remote Control on

your HyperDeck 55

Playback using HyperDeck

Extreme Control 55

HyperDeck Extreme Control Workflow 56

Connecting your RS-422 Devices 56

Connecting your Video Signal 57

Reference Signal 57

Selecting your Devices 57

Controlling your playback

andrecord decks 58

Testing Control 59

Finding your Timecode Point

using the Search Dial 59

Using the Transport Controls 62

Using the Multi Deck Feature 64

HyperDeck Extreme Control Front Panel 64

HyperDeck Extreme Control Rear Panel 65

Accessories 66

Rack Mounting HyperDeck 66

RS-422 Control 68

Transferring Files over a Network 74

Developer Information 75

Blackmagic HyperDeck

Ethernet Protocol 75

Protocol Commands 76

Protocol Details 79

Help 88

Regulatory Notices 89

Safety Information 90

Warranty 91

Contents

HyperDeck Extreme 8K HDR and

HyperDeck Extreme Control

Getting Started with

HyperDeck Extreme 8K HDR

This section of the manual shows how to get started using your HyperDeck Extreme 8K HDR.

Getting started is as simple as connecting power, plugging in your video and audio, inserting

a formatted CFast card and pressing the record button! You can then stop recording and play

back your files using the built in touchscreen or transport control buttons on the front panel.

However, you can also connect Blackmagic HyperDeck Extreme Control and operate your

HyperDeck remotely. This is a powerful external controller with many features including a

search dial for precise jog and shuttle control. An entire section dedicated to HyperDeck

Extreme Control is provided later in this manual.

Plugging in Power

To power your HyperDeck Extreme 8K HDR, connect a standard IEC cable to the AC power

input on the rear of the unit. You can also use the 12V DC input if you want to connect external

power or redundancy via an external power supply, for example an uninterruptible power

supply or external 12V battery.

Connect power to the AC or DC power inputs on the rear of the unit

5Getting Started with HyperDeck Extreme 8K HDR

NOTE When plugging in external power, make sure the power voltage output matches

the input voltage range marked on the rear panel.

Once powered, the touchscreen display will prompt you to select your language. To select your

language, tap on the language option followed by ‘update’. The main window will now appear.

Select your language and tap update to confirm

TIP You can change your language at any time via the setup menu. For more

information, see the ‘setup tab’ later in this manual.

Plugging in Video and Audio

There are a range of connectors on the rear of the unit so you can plug in a variety of sources,

from analog composite and component video, to SDI and HDMI.

If you want to connect an HDMI or SDI monitor, plug them into the HDMI or SDI outputs.

Audio is embedded in SDI and HDMI so you don’t have to worry about connecting audio.

However, if you want to plug in analog audio sources you can connect them via the balanced

XLR or unbalanced RCA inputs. For detailed information on all the input and output connectors,

refer to the ‘HyperDeck Extreme 8K HDR rear panel’ section of this manual.

Plug your video source into the SDI, HDMI or analog video inputs

6Getting Started with HyperDeck Extreme 8K HDR

TIP HyperDeck Extreme 8K HDR automatically detects the video format and frame

rate and you can see this information displayed on the touchscreen overlay.

Plugging in CFast Cards

HyperDeck Extreme 8K HDR ships ready to record immediately. All you need is a formatted

CFast card!

You can format your CFast cards via the touchscreen LCD or via a computer. For more

information, see the ‘preparing storage media’ section later in this manual.

Using CFast Cards

The front panel features two CFast 2.0 slots for recording. CFast cards are capable

ofsupporting very high data rates, so are perfect for recording HD and Ultra HD Apple ProRes

and 8K H.265 files.

To insert a CFast card, slide it into the CFast card slot with the smaller socket facing upwards.

Apply gentle pressure until you feel it click into place. If the card is inserted incorrectly, you will

feel a solid resistance and the card will not seat.

Insert the CFast card with the card’s small slot facing upwards

To remove a CFast card, gently push the CFast card into the slot until you feel it click, then

release. The card willeject enough for you to hold the end of the card and remove it from

the slot.

That’s all there is to getting started! With the unit powered, your video source plugged in and

CFast cards formatted and inserted, you can now start recording!

Keep reading this manual to learn about all the record and playback controls on your

HyperDeck and how to change settings using the touchscreen display. You can also find

information about the connectors on the rear panel, including how to connect analog archival

video via the composite and component inputs.

7Getting Started with HyperDeck Extreme 8K HDR

Recording

HyperDeck Extreme 8K HDR records video using H.265 and Apple ProRes codecs. The default

codec is Apple ProRes so you can press record straight away and record high quality 10-bit

video. If you want to record 8K video, you will need to change the codec to H.265. This section

of the manual will show you how to do that.

Selecting your Source and Codec

Change the source and codec settings using the intuitive touchscreen display.

To select a source:

1 Tap the ‘source’ icon to the right of the timecode display at the top of the touchscreen

to open the ‘record’ menu.

2 From the input options, tap the icon corresponding to the source input your video

signal is connected to, for example HDMI or component.

To select a codec:

1 From the codec options, tap on ProRes or H.265.

2 Different quality settings are available depending on the codec selected and you can

choose one by tapping the desired ‘quality’ icon. For ProRes, ‘HQ’ is the highest quality

available. If you have selected H.265, ‘high’ will record the highest quality.

8Recording

To return to the main display, tap the menu icon in the top right corner. Your input and codec

selection will appear on the top toolbar of the main display along with the video source

on the LCD.

TIP For more information on codecs and available quality settings, see the ‘codec and

quality’ section in the record menu later in this manual.

Starting Record

Now that you have set your source and codec, you can start recording.

Press the ‘record’ button on the front panel, or tap the red record icon on the touchscreen.

Youcan see your HyperDeck is recording because the record button will illuminate red along

with the timecode display and media icon. To stop recording, simply press either the

touchscreen or front panel ‘stop’ button.

Media Warning Indicator

If you are recording Ultra HD or high quality 8K video using slower media, you may experience

problems with your media. For example, 8Krecording uses a higher data rate compared to Ultra

HD, so your CFast cards need to be the fastest available. If there are problems with your media

during recording, you will see a red exclamation icon above the audio meters on the

touchscreen overlay.

An exclamation mark will appear in the lower right hand corner of the

display if problems with your media have been detected

9Recording

We strongly recommend making sure your media is on the approved media list, which can be

found in the ‘storage media’ section later in this manual.

Cache Recording

You can avoid the risk of problems with your media completely by using the optional

cache recording feature in HyperDeck Extreme 8K HDR. This lets you record the

highest resolutions and frame rates on even the slowest media. For example, with a

cache you can record 8K ProRes HQ files onto a CFast card.

The optional cache recording feature records all files to an internal M.2 PCIe NVMe

flash disk before they are transferred to your storage media. Depending on the speed

of your storage media, this transfer can appear almost instantaneous! Abenefit of

M.2 PCIe NVMe flash disks is that they are incredibly fast, completely removing the

risk of problems even with slow recording media!

Another benefit of the cache feature is that recordings will continue even after your

connected storage media is full! When the card has no recording space left, the

recording will continue to the cache. Once a formatted CFast card or external disk

inserted, the recording will automatically start transferring to the newly inserted card.

For more information about cache recording, including how to install the M.2 PCIe

NVMe SSD, see the ‘about cache’ section later in this manual.

Playback

Once you have finished recording, simply press the ‘play’ button, or tap the play icon on the

touchscreen to start playback immediately.

You might have noticed that if you press the play button or tap the play icon more than once,

the play icon on the touchscreen changes. That is because pressing play more than once

enables the ‘loop’ feature. Looping can be helpful if you want the playback to continue looping

the same clip indefinitely, or to loop all clips on the timeline.

You can tell which loop feature is enabled by observing the play icon on the touchscreen. If it is

not the loop feature you want, simply keep pressing or tapping play to cycle it to the feature

you do want.

Loops the same clip.

After the final clip has played, playback will return to

the first clip and continue playing all clips.

To disable the loop feature, simply tap or press play until the loop icons are no longer visible.

10Playback

Toggle the stop button to switch between playback and record mode

You aren’t locked in to using the soft touch buttons or touchscreen buttons to control the

HyperDeck Extreme 8K HDR. Using the HyperDeck Extreme Control your HyperDeck

Extreme 8K HDR and 7 other remote devices at once!

For more information on HyperDeck Extreme Control, see the dedicated section later in

this manual.

HyperDeck Extreme 8K HDR Front Panel

The front panel includes soft touch buttons for easy, immediate access and an ultra bright

2000 nit HDR display to see your video in brilliant true to life colors.

5

2 4

3

1

1 Front Panel Speaker

The built in mono speaker on the front panel lets you check your audio levels directly

from the front panel. Simply tap on the volume meters on the bottom right of the

touchscreen display and adjust the speaker level using the slider.

11HyperDeck Extreme 8K HDR Front Panel

Tap on the audio meters to display and adjust the speaker level

2 Soft Touch Buttons

HyperDeck Extreme 8K HDR features 7 soft touch buttons on the front panel so you

can quickly access traditional transport controls or apply LUTs. Each button is backlit

when the unit is powered so you can easily see the buttons when the unit is installed in

low light conditions, such as a dubbing facility.

If you are using a RS-422 device to control playback and recording remotely,

press the ‘rem’ button. This will allow the your HyperDeck to be controlled

externally from a device such as the HyperDeck Extreme Control or the

HyperDeck Ethernet Protocol. The button will illuminate to indicate the remote

feature is active.

The five transport control buttons including the most commonly used functions

forrecording and playback; record, stop, play, fast forward and rewind. Use these

buttons for immediate control over the record and playback functions.

When active the selected button will illuminate.

3D LUT lets you toggle the active display LUT on the HDR LCD display.

The button will illuminate when active.

For more information on LUTs, including how to set your LUT and display it on

the LCD and or monitor out, see the ‘LUTS’ tab in the dashboard menu later in

this manual.

NOTE It is worth noting that if the unit does not have a valid signal

connected,pressing the ‘record’ button has no effect on the unit. This is the

same for the play and fast forward and rewind buttons when no storage

mediais connected.

12HyperDeck Extreme 8K HDR Front Panel

3 Headphone Port

Connect a set of headphones to the 1/4” headphone jack on the front panel to listen to

the audio. To change the headphone volume level, tap on the volume meters on the

touchscreen display and adjust the ‘headphone level’ slider.

4 Touchscreen

The 7” LCD display features a large ultra bright HDR video display with intuitive

touchscreen controls. The wide color gamut displays both Rec. 2020 and Rec. 709

color spaces and 100% of the DCI-P3 format. You can also display full screen video

scopes. You can access all available on screen controls and menu options via the

touchscreen display!

For more information on the menu settings and using the touchscreen, see the

‘touchscreen settings’ section further in this manual.

5 CFast 2.0 Card Slots

2 CFast slots on the front of the panel for your CFast cards. LED lights to the right of the

slow indicate the media status.

Playback

Recording or while cache is transferring

Card is ready or no card is installed

HyperDeck Extreme 8K HDR Rear Panel

6

8

11

12

13

15

16

17

14

7

9

10

6 Power

There are two power options on the rear, an AC power input for IEC mains power input

as well as a 12V 4 pin XLR DC input for connecting redundancy or battery power.

Ensure any DC power source connected to the units is compatible with the input

voltage and current rating marked at the DC IN connector

7 Analog Input

Connect analog sources for archiving via the analog stereo left and right RCA

connectors, the single BNC composite input or via the component in.

13HyperDeck Extreme 8K HDR Rear Panel

8 Remote

There are two RS-422 DB9 connectors for remote in and out.

9 USB

Use the USB-C connector with the white surround for software updates via a computer

using the HyperDeck Setup Utility.

10 Ethernet

A 10Gb/s ethernet connection lets you connect directly to your network for fast ftp

transfers or to remotely control the unit via the HyperDeck Ethernet Protocol.

Connect it to the same network as an ATEM Switcher and you can use your HyperDeck

for playback using the HyperDecks palette in ATEM Software Control or via an

ATEM broadcast panel. For more details on transferring files via an FTP client, see the

‘transferring files over a network’ section later in this manual.

11 Time Code

Receive external timecode via the XLR timecode inputs or loop out timecode via the

XLR timecode out connection. For more information on how to select your timecode

options, see the ‘setup’ menu later in this manual.

12 Ref

Your HyperDeck Extreme 8K HDR features a stabilized video reference output

corresponding to standard definition black burst and high definition tri-sync standards.

You can also receive reference signals from external sources such as a sync generator.

This means you can have multiple devices in your facility receiving a reference signal

from a single source, such as the Blackmagic Sync Generator, to genlock all your

equipment together! Select between the input and external reference source via the

touchscreen setup menu.

For more information on selecting your reference source, see ‘setup’ settings later in

the manual.

13 HDMI

The HDMI connections are perfect for when you’re using the unit as a field recorder

and connecting to an HDMI enabled display for playback. For signals from standard

definition to 2160p60, the HDMI input will auto detect SDR and HDR video standards

when the signal is flagged with the correct metadata. This means you can display

stunning HDR images on HDR enabled HDMI screens using the HDMI out.

14 Analog Audio

You can connect up to 4 channels of balanced analog audio in or out via 3 pin XLR

connectors. Select your audio input using the ‘audio’ tab in the dashboard menu.

See the ‘audio’ section later in this manual for more information.

15 Monitor Out

An 3G-SDI monitor out connection provides a downscaled output with overlays so that

you can monitor on an external display. The overlays include focus and exposure tools

such as grid and false color that you can toggle on and off as well as drive icons, audio

meters and a time counter display. For more information on the Monitor SDI settings,

including how to output a clean signal, see the ‘monitor’ page in the dashboard menu

later in this manual.

14HyperDeck Extreme 8K HDR Rear Panel

16 Ext Disk

Connect a flash disk to the USB-C connector on the rear so you can record to external

disks at up to 10Gb/s. You can also connect to multi port USB-C hubs or the MultiDock

10G allowing you to connect one or multiple SSDs for far greater storage capacity!

Recording to high speed SSD’s and hard drives reduces the risk of problems with your

media compared to CFast 2.0 cards. For more information on external disks, see the

‘storage media’ section later in this manual.

17 12G-SDI Digital Video

Featuring four 12G-SDI inputs and outputs on the rear for video signals from standard

definition to Ultra HD via a single cable, 8K30p via dual link 12G-SDI and up to 8K60p

via quad link 12G-SDI.

Using the quad link 12G-SDI connections you can use HyperDeck Extreme in 8K

workflows. Connect it to ATEM Constellation 8K as a playback or recording device that

can be accessed via the HyperDecks palette in ATEM Software Control

Connect your 4 12G-SDI cables from the input or output on the HyperDeck Extreme to

one of the 8K inputs or outputs on the rear of the ATEM Constellation 8K. It is important

to connect your quad link SDI cables in the correct order. For example, connect the

SDI input or output labelled ‘c’ on HyperDeck Extreme to the third input or output on

the ATEM Constellation 8K.

Plugging the 8K quad link SDI output of a HyperDeck Extreme 8K

HDR into the SDI input of the ATEM Constellation 8K.

15HyperDeck Extreme 8K HDR Rear Panel

Two Sample Interleave

There are two different methods for 8K workflows; two sample interleave and square

division. HyperDeck Extreme 8K HDR and ATEM Constellation 8K both use two

sample interleave, known as 2SI. With 2SI, each 12G-SDI connection delivers an 8K

signal at 1/4 of the resolution. When combined, you have a full resolution 8K signal!

A benefit of the 2SI method is that if one of the 4 connections become loose, you will

only lower the resolution rather than lose one corner of the image, as would be the

case in a square quadrant setup.

AA BB AA BB

CC DD CC DD

AA BB AA

8K

BB

CC DD CC DD

If your 8K workflow involves devices using the square division method, your can use

Teranex Mini SDI to HDMI 8K HDR to convert automatically from 2SI to square division.

Touchscreen Display

Touchscreen Features

The interactive touchscreen display lets you view

and select options directly from the screen

16Touchscreen Display

The intuitive 7 inch display lets you view and select many of the HyperDeck Extreme functions

directly from the touchscreen display.

The display includes an upper and lower toolbar. These toolbars display settings and status

information, for example the current source, or the clip currently being recorded or played.

Settings can also be adjusted by tapping on their relevant icons, for example to change the

source, tap on the ‘source’ icon and then tap on one of the source options.

Indicators show the current status for items such as the source video format and frame rate,

timecode, media record time remaining, audio levels and transport controls.

The lower toolbar can be hidden or revealed by swiping the touchscreen up or down.

Upper Toolbar

Navigate directly to the related menu options by tapping ‘source’ or ‘codec’.

Monitor options

Tap on the monitor icon on the left to access the monitor overlay settings. These settings let

you select and modify the appearance of overlay options including zebra, focus peaking,

guides, grid, false color, contrast, brightness and saturation. This is especially useful when using

the HyperDeck Extreme 8K HDR as a field recorder.

Zebra

Zebra mode will help you to achieve the optimum exposure by displaying diagonal lines

over the areas of content that exceed the set zebra level. To enable zebra mode, toggle

the switch to on. Use the slider or the arrows to the left and right of the percentage icon

to select your zebra level. A level of 100% will mean any area of the image displaying

diagonal lines is overexposed.

Use the slider or arrow to select your zebra percentage

TIP You can also set the zebra to highlight areas of your image that represent

specific video levels on a waveform, for example setting the zebra for 50%

means you can visually identify which regions of your image will appear at

approximately 50% on a waveform scope.

17Touchscreen Display

Focus Assist

Focus assist gives you powerful tools to help focus your image fast. Focus assist

displays edge lines on the sharpest areas of the image. To turn on focus assist, toggle

the switch to on. Sensitivity settings let you change how strong the lines are from ‘low’,

‘medium’ or ‘high’. In images with lots of detail and high contrast, the lines can be

distracting, so in these conditions you can select ’low’ or ‘medium’.

Alternatively, for low contrast shots with less detail, select ‘high’ so the lines are

stronger and easier to see. If you find lines are too visually intrusive, you can select

‘peak’ levels instead. For more information on how to set peak levels, see the ‘monitor’

settings later in this manual.

Frame Guides

Guides provide a range of aspect ratios from various film, television and online

standards. Tap the toggle switch to on and then select your guide by tapping the left

and right arrows or by dragging the slider control.

18Touchscreen Display

Grid

The grid option lets you select overlays to assist with shot framing.

Thirds Thirds will overlay two horizontal and two vertical lines over your image,

breaking it up into 9 smaller sections to help you compose your shot.

Thehuman eye typically looks for action near the points where the lines

intersect, so it’s helpful to frame key points of interest in these zones.

An actor’s eyeline is commonly framed along the top third of the screen,

soyou can use the top third to guide your framing.

Crosshairs The ‘crosshairs’ setting places a crosshair in the center of the frame.

Like thirds, the crosshairs is a very useful compositional tool, making it easy to

frame the subject of a shot in the very center of a frame. This is sometimes

used when filming scenes that will be assembled using very fast cuts.

Keeping viewers’ eyes focused on the center of a frame can make rapid editing

easier to follow.

Center Dot The ‘center dot’ setting places a dot in the center of the frame. This works in

exactly the same way as the ‘crosshair’ setting, albeit with a smaller overlay

that you may find less intrusive.

You can enable a combination of ‘thirds’ and ‘crosshairs’ or ‘thirds’ and ‘center

dot’ by tapping both options in the ‘grids’ menu. ‘Crosshairs’ and ‘center dot’

cannot be selected together.

False Color

The ‘false color’ setting toggles the appearance of false color exposure assistance on

the LCD touchscreen and the SDI monitor out. When false color is on, different colors

are superimposed over your image to represent different exposure levels. For example,

optimal exposure for skin tones can be achieved by using green for dark shades and

pink for light shades. Monitoring the colors during recording can help you maintain

consistent exposure for skin tones. Similarly, when elements in your image change from

yellow to red, that means they are now over exposed.

19Touchscreen Display

TIP Zebra, focus peaking, guides, grid and false color can be toggled on or

off via the ‘monitor settings’ in the dashboard menu. You can also toggle the

overlays for the 3G-SDI Monitor output. See ‘monitor settings’ later in this

manual for more information.

The three remaining monitor settings alter the LCD display settings.

Contrast Adjust the contrast of the HDR display to increase or decrease the

range between the brightest and darkest parts. A high contrast

image can reveal detail and depth in the image, low contrast can

make the image appear soft and flat.

Brightness Adjust the brightness of the display by dragging the slider to the

left to make the imagedarker, or the right to make it lighter.

Changing the display brightness can make it easier to see images

when the HyperDeck Extreme 8K HDR is in extremely bright or

low light locations.

Saturation Use the saturation slider to increase or decrease the amount of

color in your displayed image.

NOTE All settings will be kept when the unit is powered off. It’s also worth mentioning

that the use of monitor options will affect the image displayed on the LCD display, but

not your recorded video.

Codec

The codec icon displays your currently selected ‘record’ codec or the ‘playback’ codec of the

file currently playing. You can select a new codec for recording by tapping the codec icon and

selecting from the menu options displayed on screen. For more codec information, see the

‘record’ settings section later in this manual.

20Touchscreen Display

Sayfa yükleniyor ...

Blackmagic HyperDeck Extreme 8K HDR and HyperDeck Extreme Control Kullanım kılavuzu

Blackmagic HyperDeck Extreme 8K HDR and HyperDeck Extreme Control Kullanım kılavuzu

Diğer dillerde

İlgili Makaleler

Diğer Belgeler