![](//vs1.manuzoid.biz.tr/store/data-gzf/fe5ee489cffca14564ce74ec3b67180f/2/000197304.htmlex.zip/bg7.jpg)
7
GB
Subtracting Measurements
You can subtract one measurement from another.
1.
Click (Figure
A
#5) to turn on the tool.
2.
The tool will measure the distance from the bottom
of the tool to the wall or object (Figure
F
#1).
To measure from the top of the tool instead of the
bottom (Figure
F
#2), hold for 2 seconds.
On the display window, the tool icon will change
from to (Figure
E
#5).
3.
Point the laser at the top of the tool (Figure
A
#1)
toward the wall or object whose distance you need
to measure.
4.
Click to measure the distance from the tool
to the wall or object.
5.
Indicate that you want to subtract the next
measurement from this measurement.
• On the DW099E keypad, click twice.
• On the DW099S keypad, click twice.
6.
Point the laser at the top of the tool toward the next
wall or object.
7.
Click to measure the distance and subtract it
from the previous measurement.
8.
View the difference between the two measurements
at the bottom of the display window (Figure
E
#3).
Changing the Unit of Measure
Once the current measurement is taken (the device is
not in Continuous Measure mode), you can change the
unit of measure from decimal ft (6.21 ft) to fractional ft
(6'02"9/16), fractional ft to meters (1.894 m), meters to
inches (74 9/16 in), or inches to decimal ft.
• On the DW099E keypad, click (Figure
A
#3).
• On the DW099S keypad, hold
(Figure
B
#1) until you see the measurement
change (2-3 seconds).
Using Your DW099S With
If you have a DW099S, you can use its Bluetooth
®
capability to pair it with the DeWALT Tool Connect
application on your cell phone or tablet, and then record
accurate measurements in your floor plans.
1.
From either or , download
the DeWALT Tool Connect application to your cell
phone or tablet.
2.
Using the DeWALT Tool Connect application,
capture the room or space for which you want to
record the measurements, and build your floor plan.
3.
On the DW099S keypad, click to turn on the
tool.
4.
If the Bluetooth
®
icon does not appear on the
display window (Figure
E
#6), click on the
keypad to turn on Bluetooth
®
.
5.
Use the DeWALT Tool Connect application to pair
your cell phone or tablet to the DW099S.
6.
Use the DW099S to measure each wall in the room
or space captured in the floor plan, and sync the
measurements to the floor plan.
7.
Using the DeWALT Tool Connect application, save
the floor plan.
Once you have saved the floor plan, you can export it
to one of several different file formats, including PDF,
DXF, or JPG, and print it or email it to other people (your
realtor, home center, etc.).
“THE BLUETOOTH
®
WORD MARK AND LOGOS ARE
REGISTERED TRADEMARKS OWNED BY BLUETOOTH
SIG, INC. AND ANY USE OF SUCH MARKS BY DEWALT
INDUSTRIAL TOOL CO. IS UNDER LICENSE. OTHER
TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR
RESPECTIVE OWNERS.”
Turning Off the Tool
The tool can be turned off in either of these ways:
• Press and hold for several seconds (until the
display window clears).
• If you do not use the tool for 90 seconds, it will
automatically turn off.