NEC MultiSync® LCD1525M El kitabı
- Kategori
- TV'ler
- Tip
- El kitabı
Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:
MultiSync LCD1525M
Kullan∂c∂ Klavuzu
Declaration
Declaration of the Manufacturer
We hereby certify that the colour monitor
MultiSync LCD1525M (LA-1528HMW)
(LA-1528HMW-BK)
are in compliance with
Council Directive 73/23/EEC:
- EN 60950
Council Directive 89/336/EEC:
- EN 55022
- EN 61000-3-2
- EN 61000-3-3
- EN 55024
and marked with
NEC-Mitsubishi Electric Visual Systems, Corp.
686-1, NISHIOI OI-MACHI
ASHIGARAKAMI-GUN
KANAGAWA 258-8533, JAPAN
For the Customer to use in
U.S.A. or Canada
Canadian Department of Communications
Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouiller du Canada.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety
Regulations according to C.S.A. C22.2 #950.
Ce produit porte la marque ‘C-UL’ et se conforme aux règlements de
sûrele Canadiens selon CAN/CSA C22.2 No. 950.
FCC Information
1. Use the attached specified cables with the MultiSync LCD1525M
colour monitor so as not to interfere with radio and television
reception.
(1) The power supply cord you use must have been approved by
and comply with the safety standards of U.S.A., and meet the
following condition.
Power supply cord Non shield type, 3-conductor
Length 1.8 m
Plug shape
(2) Please use the supplied AC Adapter which is include in stand.
(3) Shielded video signal cable.
Use of other cables and adapters may cause interference with
radio and television reception.
(4) Please use supplied USB cable.
(5) Please use supplied audio cable.
2. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult your dealer or an experienced radio/TV technician for
help.
If necessary, the user should contact the dealer or an experienced
radio/television technician for additional suggestions. The user may
find the following booklet, prepared by the Federal Communications
Commission, helpful: “How to Identify and Resolve Radio-TV
Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, D.C., 20402, Stock No. 004-
000-00345-4.
DECLARATION OF
CONFORMITY
This device complies with Part 15 of FCC Rules. Operation is subject to
the following two conditions. (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
U.S. Responsible party: NEC-Mitsubishi Electronics
Display of America, Inc.
Address: 1250 N. Arlington Heights Road
Itasca, Illinois 60143-1248
Tel. No.: (630)467-3000
Type of Product: Computer Monitor
Equipment Classification: Class B Peripheral
Models: MultiSync LCD1525M
We hereby declare that the equipment specified above conforms
to the technical standards as specified in the FCC Rules.
LA-1528HMW-BK only
TCO’95
Congratulations! You have just
purchased a TCO’95 approved and
labelled product! Your choice has
provided you with a product developed
for professional use. Your purchase has
also contributed to reducing the burden
on the environment and also, to the
further development of environmentally
adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established
method for encouraging the adaptation of goods and services to the
environment. The main problem, as far as computers and other
electronics equipment are concerned, is that environmentally harmful
substances are used both in the products and during the manufacturing.
Since it is as yet not possible to satisfactorily recycle the majority of
electronics equipment, most of these potentially damaging substances
will eventually enter the environment.
There are also other characteristics of a computer, such as energy
consumption levels, that are important from the viewpoints of both the
work (internal) and natural (external) environments. Since all methods of
conventional electricity generation have a negative effect on the
environment (acidic and climate-influencing emissions, radioactive
waste, etc.), it is vital to conserve energy. Electronics equipment in
offices consume an enormous amount of energy since they are often left
running continuously.
What does labelling involve?
This product meets the requirements for the TCO’95 scheme which
provides for international and environmental labelling of personal
computers. The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional Employees),
Naturskyddsforeningen (The Swedish Society for Nature Conservation)
and NUTEK (The National Board for Industrial and Technical
Development in Sweden).
The requirements cover a wide range of issues: environment,
ergonomics, usability, emission of electrical and magnetic fields, energy
consumption and electrical and fire safety.
The environmental demands concern restrictions on the presence and
use of heavy metals, brominated and chlorinated flame retardants,
CFCs (freons) and chlorinated solvents, among other things. The
product must be prepared for recycling and the manufacturer is obliged
to have an environmental plan which must be adhered to in each
country where the company implements its operational policy.
The energy requirements include a directive that the computer and/or
display, after a certain period of inactivity, shall reduce its power
consumption to a lower level. The length of time to reactivate the
computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for
example, in respect of the reduction of electric and magnetic fields,
physical and visual ergonomics and good usability.
On the back page of this folder, you will find a brief summary of the
environmental requirements met by this product. The complete
environmental criteria document may be ordered from:
TCO Development Unit
S-114 94 Stockholm
Sweden
Fax: +46 8 782 92 07
Email: [email protected]
Current information regarding TCO’95 approved and labelled products
may also be obtained via the Internet, using the address:
http://www.tco-info.com/
TCO’95 is a co-operative project between TCO (The Swedish
Confederation of Professional Employees), Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and NUTEK (The
National Board for Industrial and Technical Development in Sweden).
Environmental Requirements
Brominated flame retardants
Brominated flame retardants are present in printed circuit boards,
cables, wires, casings and housings. In turn, they delay the spread of
fire. Up to thirty percent of the plastic in a computer casing can consist
of flame retardant substances. These are related to another group of
environmental toxins, PCBs, which are suspected to give rise to similar
harm, including reproductive damage in fisheating birds and mammals,
due to the bio-accumulative* processes. Flame retardants have been
found in human blood and researchers fear that disturbances in foetus
development may occur.
TCO’95 directive requires that plastic components weighing more than
25 grams must not contain organically bound chlorine and bromine.
Lead**
Lead can be found in picture tubes, display screens, solders and
capacitors. Lead damages the nervous system and in higher doses,
causes lead poisoning.
TCO’95 requirement permits the inclusion of lead since no replacement
has yet been developed.
Cadmium**
Cadmium is present in rechargeable batteries and in the
colourgenerating layers of certain computer displays. Cadmium
damages the nervous system and is toxic in high doses.
TCO’95 requirement states that batteries may not contain more than
25 ppm (parts per million) of cadmium. The colourgenerating layers of
display screens must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches and back-
light system. Mercury damages the nervous system and is toxic in high
doses.
TCO’95 requirement states that batteries must not contain more than
25 ppm (parts per million) of mercury. It also demands that no mercury
is present in any of the electrical or electronics components concerned
with the display unit except the back-light system.
CFCs (freons)
CFCs (freons) are sometimes used for washing printed circuit boards
and in the manufacturing of expanded foam for packaging. CFCs break
down ozone and thereby damage the ozone layer in the stratosphere,
causing increased ultraviolet light to enter the earth‘s atmosphere with
consequent increased risks of skin cancer (malignant melanoma).
The relevant TCO’95 requirement: Neither CFCs nor HCFCs may be
used during the manufacturing of the product or its packaging.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
LA-1528HMW only
TCO’99
Congratulations! You have just purchased a
TCO’99 approved and labelled product! Your
choice has provided you with a product
developed for professional use. Your purchase
has also contributed to reducing the burden
on the environment and also to the further
development of environmentally adapted
electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established
method for encouraging the adaptation of goods and services to the
environment. The main problem, as far as computers and other
electronics equipment are concerned, is that environmentally harmful
substances are used both in the products and during their manufacture.
Since it is as yet not possible to satisfactorily recycle the majority of
electronics equipment, most of these potentially damaging substances
will eventually enter the environment.
There are also other characteristics of a computer, such as energy
consumption levels, that are important from the viewpoints of both the
work (internal) and natural (external) environments. Since all methods of
electricity generation have a negative effect on the environment (e.g.
acidic and climate-influencing emissions, radioactive waste), it is vital to
save energy. Electronics equipment in offices is often left running
continuously and thereby consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO’99 scheme which
provides for international and environmental labelling of personal
computers. The labelling scheme was developed as a joint effort by
the.TCO (The Swedish Confederation of Professional Employees),
Svenska Naturskyddsforeningen (The Swedish Society for Nature
Conservation) and Statens Energimyndighet (The Swedish National
Energy Administration).
Approval requirements cover a wide range of issues: environment,
ergonomics, usability, emission of electric and magnetic fields, energy
consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and
use of heavy metals, brominated and chlorinated flame retardants,
CFCs (freons) and chlorinated solvents, among other things. The
product must be prepared for recycling and the manufacturer is obliged
to have an environmental policy which must be adhered to in each
country where the company implements its operational policy.
The energy requirements include a directive that the computer and/or
display, after a certain period of inactivity, shall reduce its power
consumption to a lower level. The length of time to reactivate the
computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for
example, in respect of the reduction of electric and magnetic fields,
physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements
met by this product. The complete environmental criteria document may
be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email: [email protected]
Current information regarding TCO’99 approved and labelled products
may also be obtained via the Internet, using the address:
http://www.tco-info.com/
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires,
casings and housings. Their purpose is to prevent, or at least to delay
the spread of fire. Up to 30% of the plastic in a computer casing can
consist of flame retardant substances. Most flame retardants contain
bromine or chloride, and those flame retardants are chemically related
to another group of environmental toxins, PCBs. Both the flame
retardants containing bromine or chloride and the PCBs are suspected
of giving rise to severe health effects, including reproductive damage in
fish-eating birds and mammals, due to the bioaccumulative* processes.
Flame retardants have been found in human blood and researchers fear
that disturbances in foetus development may occur.
The relevant TCO’99 directive requires that plastic components weighing
more than 25 grams must not contain flame retardants with organically
bound bromine or chlorine. Flame retardants are allowed in the printed
circuit boards since no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the colourgenerating
layers of certain computer displays. Cadmium damages the nervous
system and is toxic in high doses. The relevant TCO’99 requirement
states that batteries, the colour-generating layers of display screens and
the electrical or electronics components must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It
damages the nervous system and is toxic in high doses. The relevant
TCO’99 requirement states that batteries must not contain any mercury.
It also demands that mercury is not present in any of the electrical or
electronics components associated with the labelled unit.
CFCs (freons)
The relevant TCO’99 requirement states that neither CFCs nor HCFCs
may be used during the manufacture and assembly of the product.
CFCs.(freons) are sometimes used for washing printed circuit boards.
CFCs break down ozone and thereby damage the ozone layer in the
stratosphere, causing increased ultraviolet light to enter the earth‘s
atmosphere with increased risks of skin cancer (malignant melanoma)
as a consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and
capacitors. Lead damages the nervous system and in higher doses
causes lead poisoning. The relevant TCO’99 requirement permits the
inclusion of lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
ENERGYSTAR is a U.S. trademark,
As an ENERGYSTAR
®
Partner, NEC-Mitsubishi Electronics Display of America, Inc. has
determined that this product meets the ENERGYSTAR guidelines for energy efficiency. The
ENERGYSTAR emblem does not represent EPA endorsement of any product or service.
IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of
International Business Machines Corporation.
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
NEC is a registered trademark of NEC Corporation.
All other trademarks or registered trademarks are property of their respective owners.
Türkçe-1
Türkçe
NEC MultiSync
LCD1525M Giriµ
NEC MultiSync LCD1525M gerçek renk monitörünü sat∂n ald∂π∂n∂z için
tebrikler!
Daha Geniµ Uyumluluk
MultiSync LCD monitör tamamen analog olduπu için analogtan dijitale
ekran ya da arabirim kartlar∂ gerektirmezken doπrudan RGB giriµi
kullanabilir.
Azalt∂lm∂µ Alan ∑htiyac∂
Boyut ve aπ∂rl∂k k∂s∂tlamalar∂ olan ancak çok üstün görüntü kalitesi
gerektiren ortamlar için en ideal çözümü saπlar. Küçük monitör ayaπ∂ ve
hafif oluµu bir yerden baµka bir yere kolayl∂kla hareket ettirilmesine ya
da taµ∂nmas∂na olanak saπlar.
Renk Kontrol Sistemi
Ekran∂n∂zdaki renkleri ayarlaman∂za ve monitörünüzün renk
hassasiyetini farkl∂ standartlara göre düzenleyebilmenize olanak saπlar.
OSM (On Screen Manager) Kontrolleri
Ekrandaki menüler arac∂l∂π∂ ile ekran∂n∂zla ilgili tüm ayarlar∂ kolay ve
h∂zl∂ bir µekilde yapman∂z∂ saπlar.
Ergonomik Tasar∂m Özellikleri
Çal∂µma ortam∂n∂ geliµtirmek, kullan∂c∂n∂n saπl∂π∂n∂ korumak ve para
tasarrufu için iyileµtirilmiµ ergonomi. Örneπin, h∂zl∂ ve kolay görüntü
ayarlar∂ için OSM kontrolleri, tercih edilen görme aç∂s∂ için eπim taban∂,
küçük monitör ayaπ∂ ve daha düµük emisyonlar için MPRII kurallar∂na
uyumluluk.
Türkçe-2
Tak ve Çal∂µt∂r
Windows
®
iµletim sistemlerinde Microsoft
®
çözümü, kurma ve
yap∂land∂rmay∂ monitörünüzün özelliklerini (ekran boyutu ve desteklenen
çözünürlükler gibi) doπrudan bilgisayar∂n∂za göndererek kolaylaµt∂r∂r ve
görüntü performans∂n∂ en iyi hale getirir.
IPM (Ak∂ll∂ Güç Yönetim) Sistemi
Monitörün aç∂k olduπu halde kullan∂lmad∂π∂ anlarda daha düµük güç
sarfiyat∂na geçmesini saπlayan geliµmiµ güç tasarruf metodlar∂ ile,
monitörünüzün enerji masraf∂nda üçte iki oran∂nda tasarruf saπlar,
emisyonlar∂ azalt∂r ve çal∂µma alan∂n∂n havaland∂rma masraf∂n∂ azalt∂r.
Çoklu Frekans Teknolojisi
Monitörü otomatik olarak ekran kart∂n∂n tarama frekans∂na ayarlayarak
gerekli çözünürlüπü gösterir.
Tam Tarama Özelliπi
Bir çok çözünürlükte ekran∂n tamam∂n∂ kullanman∂za izin verir, oldukça
büyük görüntü boyutu.
Türkçe-3
Türkçe
∑çindekiler
Yeni NEC MultiSync LCD monitör kutusunuz aµaπ∂dakileri içermelidir:
– NEC MultiSync LCD1525M
– AC Güç Kablosu
– Video Sinyal Kablosu
– Ses Kablosu
– USB Kablosu
– Kullan∂c∂ Klavuzu
– CD ROM (PDF format∂ndaki Kullan∂c∂ K∂lavuzunun tamam∂n∂ içerir)
Monitörü taµ∂mak veya bir yere göndermek için orjinal kutusunu ve
ambalaj malzemesini saklamay∂ unutmay∂n.
MultiSync LCD1525M
sinyal kablosu ile birlikte monitör
Güç Kablosu Ses Kablosu
USB Kablosu
Türkçe-4
Tavsiye Edilen Kullan∂m
Güvenlik Uyar∂lar∂ ve Bak∂m
Multisync LCD renkli monitörü kurarken ve kullan∂rken en iyi performans
için lütfen aµaπ∂daki noktalara dikkat edin:
• MON∑TÖRÜ AÇMAYIN. ∑ç k∂s∂mda kullan∂c∂n∂n ilgilenebileceπi
herhangi bir parça bulunmamaktad∂r ve kapaπ∂ açmak ya da
ç∂kartmak sizi ciddi µok tehlikeleri veya diπer risklere maruz
b∂rakabilir. Tüm bak∂m iµleri için yetkili servis elemanlar∂na baµvurun.
• Is∂n∂n düzgün olarak daπ∂lmas∂ için, monitörün etraf∂nda yeterli
havaland∂rma alan∂ olmas∂na dikkat edin. Havaland∂rma boµluklar∂n∂
kapatmay∂n ya da monitörü radyatör veya diπer ∂s∂ kaynaklar∂n∂n
yak∂n∂na yerleµtirmeyin. Monitörün üzerine hiç bir µey koymay∂n.
• Monitörün üzerine herhangi birµey koymay∂n ve monitörü d∂µar∂da
kullanmay∂n.
• Kasaya herhangi bir s∂v∂ dökmeyin ya da monitörünüzü su yak∂n∂nda
kullanmay∂n.
• Tehlikeli voltaj noktalar∂na temas ederek, zararl∂ ya da öldürücü
olabileceπi veya elektrik µoku, yang∂n ya da cihaz ar∂zas∂na yol
açabileceπi için kasadaki yuvalara herhangi bir cisim sokmay∂n.
• Güç kablosu üzerine aπ∂r cisimler koymay∂n. Kablodaki hasar µok
yada yang∂na yol açabilir.
• Monitörün düµmesine ve ciddi µekilde hasar görmesine sebep
olabileceπi için bu ürünü eπimli ya da dengesiz taµ∂y∂c∂, stand veya
masa üzerine yerleµtirmeyin.
• Güç kablosu baπlay∂c∂s∂ sistemi güç kaynaπ∂ndan ay∂rman∂n birincil
yoludur. Monitör kolayca eriµilebilen bir prize yak∂n olarak
kurulmal∂d∂r.
• MultiSync LCD monitörü AC 100-240V güç kaynaπ∂ ile kullan∂rken,
kullan∂lan AC güç kaynaπ∂n∂n saπlad∂π∂ voltaja uygun güç kablosu
kullan∂n. Kullanacaπ∂n∂z güç kablosu ülkenizdeki güvenlik
standartlar∂na uygun ve onaylanm∂µ olmal∂d∂r.
• Taµ∂rken dikkatli olun. Ambalaj∂ taµ∂ma için saklay∂n.
• LCD monitörün içindeki florasan tüpün içinde c∂va bulunmaktad∂r.
Bu tüpü atman∂z gerektiπinde lütfen yerel belediyenizin yönetmelik
ve kurallar∂na uyun.
• Güç kablosunu k∂v∂rmay∂n.
• Monitörü yüksek s∂cakl∂kta, nemli, tozlu ya da yaπl∂ alanlarda
kullanmay∂n.
Türkçe-5
Türkçe
• Monitörün üzerindeki havaland∂rma kapatmay∂n.
• Eπer monitör k∂r∂l∂rsa s∂v∂ kristal ile temas etmeyin.
Aµaπ∂daki durumlarda, monitörünüzü hemen fiµten çekin ve servis için
yetkili servis personeline baµvurun.
• Güç kaynaπ∂ kablosu ya da fiµi hasar gördüπünde.
• Eπer monitörün üstüne s∂v∂ döküldüyse veya içine herhangi bir nesne
düµtüyse.
• Eπer monitör yaπmur veya suya maruz kald∂ysa.
• Eπer monitör düµtüyse veya kasas∂ hasar gördüyse.
MON∑TÖRÜN DO∏RU YERLEΩT∑R∑LMES∑
VEAYARLANMASI GÖZ, OMUZ VE BOYUN
A∏RILARINI AZALTAB∑L∑R. MON∑TÖRÜNÜZÜ
YERLEΩT∑R∑RKEN AΩA∏IDAK∑LERE
D∑KKATED∑N:
• En iyi performans için 20 dakika ∂s∂nmas∂n∂ bekleyin.
• Monitörün yüksekliπini ekran göz seviyesinde veya biraz alt∂nda
olacak µekilde ayarlay∂n. Ekran∂n ortas∂na bakarken gözlerinin çok
hafif aµaπ∂ya doπru bakmal∂d∂r.
• Monitör gözlerinize 40cm’den yak∂n ve 70 cm.’den uzak olmamal∂d∂r.
MultiSync LCD1525M monitör için en iyi mesafe 53 cm.’dir.
• Gözlerinizi periyodik olarak en az 6m. uzaktaki bir nesneye
odaklayarak dinlendirin. S∂k s∂k göz k∂rp∂n.
• Parlama ve yans∂malar∂ en aza indirmek için monitörü pencere ve
diπer ∂µ∂k kaynaklar∂na 90° aç∂ ile yerleµtirin. Monitörün eπimini
ayarlayarak tavan ∂µ∂klar∂n∂n ekran∂n∂za yans∂mas∂n∂ engelleyin.
• Eπer ∂µ∂k yans∂malar∂ ekran∂n∂z∂ görmeyi zorlaµt∂r∂yorsa, parlama
engelleyici filtre kullan∂n.
•
LCD monitörün yüzeyini tiftiksiz, aµ∂nd∂r∂c∂ olmayan bir bezle
temizleyin. Temizleme solüsyonlar∂ veya cam temizleyici kullanmay∂n!
• Okunabilirliπi artt∂rmak için monitörün parlakl∂k ve kontrast
kontrollerini ayarlay∂n.
• Ekrana yak∂n bir döküman tutucu kullan∂n.
• Yazarken kafan∂z∂ döndürmeyi en aza indirmek için, daha fazla
bakt∂π∂n∂z neyse (ekran veya referans materyal) tam önünüzde
bulundurun.
• Görüntü sabitlenmesini engellemek için (görüntü sonras∂ efektleri)
monitörde sabit desenleri uzun süre görüntülemekten kaç∂n∂n.
• Düzenli göz kontrolü yapt∂r∂n.
Türkçe-6
Kurulum
MultiSync LCD1525M monitörü sisteminize baπlamak için, aµaπ∂daki
talimatlar∂ izleyin:
1. Bilgisayar∂n∂z∂ kapat∂n.
2. PC ∑çin: Uygun sinyal kablosunun 15-Pin mini D-SUB ucunu
sisteminizdeki ekran kart∂n∂n baπlay∂c∂s∂na tak∂n (Ωekil A. 1). Tüm
vidalar∂ s∂k∂n.
Mac ∑çin: MultiSync LCD1525M Macintosh kablo adaptörünü
bilgisayara baπlay∂n (Ωekil B.1). Uygun sinyal kablosunun 15-Pin mini
D-SUB ucunu MultiSync LCD1525M Macintosh kablo adaptörüne
tak∂n (Ωekil B.1). Tüm vidalar∂ s∂k∂n.
3. Baπlay∂c∂ kapaπ∂n∂ ve kablo kapaπ∂n∂ ç∂kar∂n. Video sinyal
kablosunun 15-Pin mini D-SUB ucunu monitörün arkas∂ndaki uygun
baπlay∂c∂ya tak∂n (Ωekil C. 1). Video Sinyal Kablosunu B Klipsinin
alt∂na yerleµtirin.
4. Ses kablosunu monitörün arkas∂ndaki “AUDIO INPUT” a (Ses Giriµ)
kablonun diπer ucunuda bilgisayar∂n arkas∂ndaki “Audio Out” (Ses
Ç∂k∂µ) terminaline tak∂n. Ses kablosunu C Klipsinin alt∂na (Ωekil D.1)
yerleµtirin Baπlay∂c∂ kapaπ∂n∂ ve kablo kapaπ∂n∂ tak∂n.
5. Kulakl∂klar monitör çerçevesinin ön taraf∂nda “
” µeklinde
iµaretlenmiµ “Kulakl∂k” ç∂k∂µ∂na baπlanabilir (Ωekil E.1). Kulakl∂klar
tak∂l∂ olduπunda hopalörlerden gelen ses devre d∂µ∂ olacakt∂r.
Kulakl∂klar∂ elektronik malzeme sat∂c∂lar∂ndan temin edebilirsiniz.
6. USB kabloyu kullanma, tip B baπlay∂c∂y∂ monitörün arkas∂ndaki USB
baπlay∂c∂ya ve tip A baπlay∂c∂y∂ bilgisayar∂n arkas∂ndaki baπlay∂c∂ya
tak∂n (Ωekil F.1). Eπer bir USB ayg∂ttan gelen kabloyu
kullan∂yorsan∂z, monitörün yan∂ndaki baπlant∂ noktas∂n∂ kullan∂n
(Ωekil G.1)
NOT: Yanl∂µ kablo baπlant∂lar∂ düzensiz çal∂µmaya sebep olabilir,
ekran kalitesine/LCD modül bileµenlerine zarar verebilir ve/
veya modülün ömrünü k∂saltabilir.
7. Güç kablosunun bir ucunu MultiSync LCD Serisi monitöre ve diπer
ucunuda elektrik prizine tak∂n (Ωekil H.1). Kullanaca©ınız güç kablosu
ülkenizdeki güvenlik standartlarına uygun ve onaylanmıµ olmalıdır.
(∑ngiltere haricinde H05VV-F kullanılmalıdır)
Türkçe-7
Türkçe
8. Monitörü (Ωekil I.1) ve bilgisayar∂ aç∂n.
9. MultiSync LCD monitörünüzün kurulumunu tamamlamak için,
aµaπ∂daki OSM kontrollerini kullan∂n:
• Auto Adjust Contrast (Otomatik Kontrast Ayar∂)
• Auto Adjust (Otomatik Ayar)
OSM kontrollerin tam tan∂mlar∂ için bu Kullan∂c∂ Klavuzunun Kontroller
bölümüne bak∂n.
NOT: Herhangi bir problemle karµ∂laµt∂π∂n∂zda, bu Kullan∂c∂
Klavuzunun Sorun Giderme bölümüne bak∂n.
Türkçe-8
Ωekil A.1 Ωekil B.1
Ωekil C.1
Ωekil D.1
Klips A
Klips B
Klips C
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
Sayfa yükleniyor...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
NEC MultiSync® LCD1525M El kitabı
- Kategori
- TV'ler
- Tip
- El kitabı
- Bu kılavuz aynı zamanda aşağıdakiler için de uygundur:
diğer dillerde
İlgili makaleler
-
NEC MultiSync® LCD1525MBK El kitabı
-
NEC MultiSync® FP1355 El kitabı
-
-
NEC LCD2080UX Kullanım kılavuzu
-
-
NEC MultiSync® LCD1830 El kitabı
-
-
-
NEC MultiSync® LCD1525XBK El kitabı
-
NEC MultiSync® LCD1850XBK Kullanım kılavuzu