Yamaha MOXF8 El kitabı

Kategori
Ses mikserleri
Tip
El kitabı

Bu kılavuz için de uygundur

MOXF6/MOXF8 Editor Installation Guide 1
ATTENTION
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY
PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS
BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”).
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS
OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS
SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE
SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use one copy of the software program(s) and data (“SOFTWARE”) accompanying this Agreement. The
term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or Yamaha’s
licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data
created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
You may use the SOFTWARE on your computer.
You m ay make one copy of the SOFTWARE in machine-readable form for backup purposes only, if the SOFTWARE is on media where
such backup copy is permitted. On the backup copy, you must reproduce Yamaha's copyright notice and any other proprietary legends
that were on the original copy of the SOFTWARE.
You m ay permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the
recipient reads and agrees to the terms of this Agreement.
2. RESTRICTIONS
You m ay n o t engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE
by any method whatsoever.
You m ay n o t reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the
SOFTWARE.
You m ay n o t electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other
computers.
You m ay n o t use the SOFTWARE to distribute illegal data or data that violates public policy.
You m ay n o t initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following
restrictions which you must observe.
Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners
in public without permission of the copyright owner.
The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified
without permission of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or
provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such
termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided
“AS IS” and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY
DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.
SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED.
SOFTWARE LICENSING AGREEMENT
MOXF6/MOXF8 Editor
Installation Guide
MOXF6/MOXF8 Editor
Installation Guide
MOXF6/MOXF8 Editor Installation Guide 2
5. LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT
SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF
THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in
contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
6. THIRD PARTY SOFTWARE
Third party software and data (“THIRD PARTY SOFTWARE”) may be attached to the SOFTWARE. If, in the written materials or the electronic data
accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must
abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY
SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any
way for the THIRD PARTY SOFTWARE or your use thereof.
Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or
consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD
PARTY SOFTWARE.
7. G E N E R A L
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute
or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this
Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.
8. COMPLETE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written
materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this
Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of
Yamaha.
The software and this Installation Guide are the exclusive copyrights of Yamaha Corporation.
Please read carefully the Software Licensing Agreement at the front of this Installation Guide before installing the application.
Copying of the software or reproduction of this Installation Guide in whole or in part by any means is expressly forbidden without the written
consent of the manufacturer.
Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for
the results of the use of this Installation Guide and the software.
Future upgrades of application and system software (e.g., firmware of the products) and any changes in specifications and functions will be
announced at the following website. http://www.yamahasynth.com/
The screen displays as illustrated in this Installation Guide are for instructional purposes, and may appear somewhat different from the
screens which appear on your computer.
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for
your personal use.
Windows is the registered trademarks of Microsoft
®
Corporation.
Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.
The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies.
Special Notices
MOXF6/MOXF8 Editor Installation Guide 3
MOXF6/MOXF8 Editor is a convenient tool which lets you edit and save the various parameters of your MOXF6/
MOXF8 synthesizer. These include Common/Part Mixing parameters (edited in the Song or Pattern mode of the
MOXF6/MOXF8) such as Volume, Pan, EG, and Cutoff, as well as parameters of a Voices assigned to each Part
(edited in the Voice mode of the MOXF6/MOXF8). Thanks to the easy-to-understand graphical interface, you can
edit various parameters of the MOXF6/MOXF8 right from your computer—using the mouse to adjust the virtual
knobs, sliders, and buttons and entering values from the computer keyboard. Finally, all the changes you have
made can be saved to your computer or transmitted to the MOXF6/MOXF8 instrument.
The MOXF6/MOXF8 Editor, based on the “VST3 technology” by Steinberg, works as a VST3 plug-in with the
Cubase series. The MOXF6/MOXF8 Editor also works as the same way as other VST instrument software, allowing
you to save the edited settings of the MOXF6/MOXF8, or use them for another project. In addition, you can handle
the MOXF6/MOXF8 Voices in the Media Bay window in Cubase when using the MOXF6/MOXF8 Editor with Cubase,
allowing you to search for, listen, and play the MOXF6/MOXF8 Voices within Media Bay in Cubase series. The
MOXF6/MOXF8 Editor provides a comprehensive and seamless music production environment—making the use of
hardware and software both easier and much more efficient.
And, the MOXF6/MOXF8 Editor can also be used as a stand-alone application.
The actual installation steps and the use of the software itself differs depending on the operating system that you
are using. Please refer to the appropriate installation instructions.
1 Install the appropriate driver to your computer.......................................................................................... page 4
2 Install the MOXF6/MOXF8 Editor. ...................................................................................................................... page 5
3 Start up the MOXF6/MOXF8 Editor. .................................................................................................................. page 5
For subsequent operations, refer to the PDF manual accessed from the [HELP] menu in the respective software
program.
Precautions when using the USB TO HOST connector
When connecting the computer to the USB TO HOST connector, make sure to observe the following points. Failing to do so
risks freezing the computer and corrupting or even losing the data. If the computer or the instrument freezes, turn the power
to the instrument off or restart the computer.
Before connecting the computer to the USB TO HOST connector, exit from any power-saving mode (such
as suspended, sleep, standby) of the computer.
Before turning on the power to the instrument, connect the computer to the USB TO HOST connector.
Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB
cable to/from the USB TO HOST connector.
- Quit any open applications.
- Make sure that data is not being transmitted from the instrument. (Data is transmitted only by playing
notes on the keyboard or playing back a song.)
While a USB device is connected to the instrument, you should wait for six seconds or more between these
operations: (1) when turning the power of the instrument off then on again, or (2) when alternately
connecting/disconnecting the USB cable.
MOXF6/MOXF8 Editor
Installing the Software
NOTICE
MOXF6/MOXF8 Editor Installation Guide 4
To use the MOXF6/MOXF8 Editor VST as a VST3 plug-in of the Cubase series, you’ll need to install the following
software programs. Follow the appropriate instructions below corresponding to the software you’re using.
Yamaha Steinberg USB Driver
MOXF6/MOXF8 Editor VST
Driver Installation
To operate your Yamaha hardware from your computer via a USB cable, you’ll need to install the Yamaha Steinberg
USB Driver.
The Yamaha Steinberg USB Driver is necessary when transferring Audio/MIDI data back and forth between your
computer’s Cubase series and the MOXF6/MOXF8.
n MOXF6/MOXF8 Editor VST cannot be used over a MIDI connection.
n The MOXF6/MOXF8 Editor VST will transmit/receive the related messages as MIDI messages to/from the MOXF6/MOXF8 only when the
computer to which Yamaha Steinberg USB driver has been installed is connected directly to the MOXF6/MOXF8 via USB. Note that the
different connection manner (via MIDI cables, etc.) disables the communication of the Editor related messages. Even if such a
connection is executed, make sure to connect the MOXF6/MOXF8 directly to the computer via USB.
Software Installation
Make sure to check the following website for installation and up-to-date news on the Yamaha Steinberg USB Driver.
http://download.yamaha.com/
Cubase
series
USB cable
Driver
Computer MOXF6/MOXF8
MOXF6/MOXF8 Editor Installation Guide 5
MOXF6/MOXF8 Editor Installation
Follow the instructions below to install the MOXF6/MOXF8 Editor programs.
Windows
1 After the downloaded compressed file is properly extracted, double-click the “Install
MOXF6_MOXF8 Editor Standalone_VST.exe” file.
The MOXF6/MOXF8 Editor setup dialog appears.
n Make sure to log on to the “Administrator” account before installing MOXF6/MOXF8 Editor.
n If the “User Account Control” window appears, click [Continue] or [Yes].
2 Follow the on-screen instructions to install the software.
Mac
1 After the downloaded compressed file is properly extracted, double-click the “Install
MOXF6_MOXF8 Editor Standalone_VST V*.*.*.pkg” file.
The MOXF6/MOXF8 Editor setup dialog appears.
n The asterisks (*) above indicate the version number of the installer.
2 Follow the on-screen instructions to install the software.
When the MOXF6/MOXF8 Editor and the other necessary software is installed, you can start the MOXF6/MOXF8
Editor. You’ll need to start the MOXF6/MOXF8 Editor VST from the VST window of Cubase series. For details about
starting and setting up Cubase series, refer to the manual of the Cubase series.
To remove the installed editors from your computer, follow the instructions below.
n The button names or menus may differ depending on the computer OS.
When using Windows 7/Windows 8
Select [Control Panel] [Programs and Features] or [Uninstall a program], then select the application to be
remove and click [Uninstall/Change].
Follow the on-screen instructions to uninstall the application.
If the “User Account Control” window appears, click [Continue] or [Yes].
Mac
After the downloaded compressed file is properly extracted, double-click the “Uninstall MOXF6_MOXF8 Editor
Standalone_VST.app” file, then follow the on-screen instructions to uninstall the application.
Software Uninstall (removing the installed application)
MOXF6/MOXF8 Editor Installation Guide 6
An audio connection between the MOXF6/MOXF8 instrument and the computer is needed to use the MOXF6/
MOXF8 Editor VST correctly. With such a connection, the MOXF6/MOXF8 Editor VST provides full functionality,
including the freeze function, mixing within the Audio Mixer of Cubase series, and other convenient features
common to other VST instrument software.
When connecting the computer and instrument directly via Yamaha Steinberg USB driver, the audio connection
(Port settings, etc.) will be set automatically.
When connecting the computer and instrument by using the separate audio interface via Yamaha Steinberg USB
driver, you should set the audio connection manually. After installing the audio interface driver correctly, select the
audio ports in the VSTi Setup window within the MOXF6/MOXF8 Editor VST
n When using the MIDI connection via Yamaha Steinberg USB Driver, you need to select the audio ports in the VSTi Setup window. If no
audio port is selected, or no audio device is installed to the computer, an error message appears. Make sure to set the audio ports in the
VSTi Setup window.
When starting the MOXF6/MOXF8 Editor after the installation and controlling the MOXF6/MOXF8
from your computer via the USB cable, the MOXF6/MOXF8 does not operate correctly.
Did you install the latest driver? ..................................................................................................................... page 4
Is the USB cable used to connect the MOXF6/MOXF8 to your computer connected correctly?
................................................................................................................................................... MOXF6/MOXF8 Owner’s Manual
If your computer has automatically activated any power-saving mode (such as suspended, sleep, standby) when
you make the USB connection, the computer may “freeze,” or the driver may stop working. When using the Yamaha
Steinberg USB Driver, disable any power-saving mode on the computer.
Confirm whether or not a proper USB cable is used.
If the USB cable is broken or damaged, have the USB cable replaced with a known working one.
Do not use a USB hub for connecting multiple USB devices.
Screen redrawing is slow or stopped.
Is any other application or device driver running?
Quit the device driver or any unnecessary applications before operating the MOXF6/MOXF8 Editor.
Audio Connection to the Computer (VST version)
Troubleshooting
C.S.G., Digital Musical Instruments Division
© 2013 Yamaha Corporation
308MW-A0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Yamaha MOXF8 El kitabı

Kategori
Ses mikserleri
Tip
El kitabı
Bu kılavuz için de uygundur